* [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support
@ 2018-06-07 13:51 Jagan Teki
2018-06-07 13:51 ` [PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor Jagan Teki
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Jagan Teki @ 2018-06-07 13:51 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-arm-kernel, devicetree, linux-kernel, Sascha Hauer,
Fabio Estevam, Matteo Lisi, Michael Trimarchi, Jagan Teki
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
Android and video capture application.
notable features:
CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
Memory Up to 2 GB DDR3-1066
Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
port 8 bit CSI INPUT MIPI-CSI INPUT
1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-icore-mipi.dts | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-icore-mipi.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 37a3de760d40..2dead792ba9d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -400,6 +400,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-hummingboard2-emmc-som-v15.dtb \
imx6dl-hummingboard2-som-v15.dtb \
imx6dl-icore.dtb \
+ imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
imx6dl-mamoj.dtb \
imx6dl-nit6xlite.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
new file mode 100644
index 000000000000..bf53f0552aa1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
--
2.14.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor
2018-06-07 13:51 [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Jagan Teki
@ 2018-06-07 13:51 ` Jagan Teki
2018-06-07 13:51 ` [PATCH 3/3] ARM: dts: imx6qdl-icore: Fix wrong reg_2p5 regulator node name Jagan Teki
2018-06-19 2:49 ` [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Jagan Teki @ 2018-06-07 13:51 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-arm-kernel, devicetree, linux-kernel, Sascha Hauer,
Fabio Estevam, Matteo Lisi, Michael Trimarchi, Jagan Teki
OV5640 Camera sensor is connected in i.CoreM6 1.5 Quad/Dual MIPI
starter kit.
This patch also move MX6QDL_PAD_GPIO_0__CCM_CLKO1 pinctrl
from i2c3 to ov5640 pinctrl.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/boot/dts/imx6q-icore-mipi.dts | 8 ++++++
arch/arm/boot/dts/imx6qdl-icore.dtsi | 46 +++++++++++++++++++++++++++++++++-
2 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index acd3d33476d4..95b2efda17b4 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -20,6 +20,14 @@
status = "okay";
};
+&mipi_csi {
+ status = "okay";
+};
+
+&ov5640 {
+ status = "okay";
+};
+
&usdhc3 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 0a1574998fc6..be8aa55c973e 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -215,6 +215,29 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+ reg = <0x3c>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "xclk";
+ DOVDD-supply = <®_1p8v>;
+ AVDD-supply = <®_3p3v>;
+ DVDD-supply = <®_3p3v>;
+ powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
+ port {
+ ov5640_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
sgtl5000: codec@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
@@ -226,6 +249,20 @@
};
};
+&mipi_csi {
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+};
+
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
@@ -353,7 +390,14 @@
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_ov5640: ov5640grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
--
2.14.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 3/3] ARM: dts: imx6qdl-icore: Fix wrong reg_2p5 regulator node name
2018-06-07 13:51 [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Jagan Teki
2018-06-07 13:51 ` [PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor Jagan Teki
@ 2018-06-07 13:51 ` Jagan Teki
2018-06-19 2:49 ` [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Jagan Teki @ 2018-06-07 13:51 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-arm-kernel, devicetree, linux-kernel, Sascha Hauer,
Fabio Estevam, Matteo Lisi, Michael Trimarchi, Jagan Teki
- in reg_2p5, fix regulator node name as regulator-2p5v
- remove exctra line
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/boot/dts/imx6qdl-icore.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index be8aa55c973e..9ce993776160 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -65,8 +65,7 @@
regulator-always-on;
};
-
- reg_2p5v: regulator-3p3v {
+ reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
--
2.14.3
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support
2018-06-07 13:51 [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Jagan Teki
2018-06-07 13:51 ` [PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor Jagan Teki
2018-06-07 13:51 ` [PATCH 3/3] ARM: dts: imx6qdl-icore: Fix wrong reg_2p5 regulator node name Jagan Teki
@ 2018-06-19 2:49 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2018-06-19 2:49 UTC (permalink / raw)
To: Jagan Teki
Cc: linux-arm-kernel, devicetree, linux-kernel, Sascha Hauer,
Fabio Estevam, Matteo Lisi, Michael Trimarchi
On Thu, Jun 07, 2018 at 07:21:31PM +0530, Jagan Teki wrote:
> i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected
> to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for
> Android and video capture application.
>
> notable features:
> CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz
> Memory Up to 2 GB DDR3-1066
> Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4
> port 8 bit CSI INPUT MIPI-CSI INPUT
> 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Applied all, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-06-19 2:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-07 13:51 [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Jagan Teki
2018-06-07 13:51 ` [PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor Jagan Teki
2018-06-07 13:51 ` [PATCH 3/3] ARM: dts: imx6qdl-icore: Fix wrong reg_2p5 regulator node name Jagan Teki
2018-06-19 2:49 ` [PATCH 1/3] ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).