From: Luiz Capitulino <lcapitulino@redhat.com>
To: David Hildenbrand <david@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>,
Pankaj Gupta <pagupta@redhat.com>,
kwolf@redhat.com, haozhong zhang <haozhong.zhang@intel.com>,
jack@suse.cz, xiaoguangrong eric <xiaoguangrong.eric@gmail.com>,
kvm@vger.kernel.org, riel@surriel.com, linux-nvdimm@ml01.01.org,
ross zwisler <ross.zwisler@intel.com>,
linux-kernel@vger.kernel.org, qemu-devel@nongnu.org,
hch@infradead.org, imammedo@redhat.com, mst@redhat.com,
niteshnarayanlal@hotmail.com, pbonzini@redhat.com,
dan j williams <dan.j.williams@intel.com>,
nilal@redhat.com
Subject: Re: [Qemu-devel] [RFC v3] qemu: Add virtio pmem device
Date: Thu, 19 Jul 2018 11:48:59 -0400 [thread overview]
Message-ID: <20180719114859.29348ed4@doriath> (raw)
In-Reply-To: <b6ef19f3-7f16-5427-bfed-f352a76e48b7@redhat.com>
On Thu, 19 Jul 2018 15:58:20 +0200
David Hildenbrand <david@redhat.com> wrote:
> On 19.07.2018 14:16, Stefan Hajnoczi wrote:
> > On Thu, Jul 19, 2018 at 01:48:13AM -0400, Pankaj Gupta wrote:
> >>
> >>>
> >>>> This patch adds virtio-pmem Qemu device.
> >>>>
> >>>> This device presents memory address range information to guest
> >>>> which is backed by file backend type. It acts like persistent
> >>>> memory device for KVM guest. Guest can perform read and persistent
> >>>> write operations on this memory range with the help of DAX capable
> >>>> filesystem.
> >>>>
> >>>> Persistent guest writes are assured with the help of virtio based
> >>>> flushing interface. When guest userspace space performs fsync on
> >>>> file fd on pmem device, a flush command is send to Qemu over VIRTIO
> >>>> and host side flush/sync is done on backing image file.
> >>>>
> >>>> Changes from RFC v2:
> >>>> - Use aio_worker() to avoid Qemu from hanging with blocking fsync
> >>>> call - Stefan
> >>>> - Use virtio_st*_p() for endianess - Stefan
> >>>> - Correct indentation in qapi/misc.json - Eric
> >>>>
> >>>> Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
> >>>> ---
> >>>> hw/virtio/Makefile.objs | 3 +
> >>>> hw/virtio/virtio-pci.c | 44 +++++
> >>>> hw/virtio/virtio-pci.h | 14 ++
> >>>> hw/virtio/virtio-pmem.c | 241
> >>>> ++++++++++++++++++++++++++++
> >>>> include/hw/pci/pci.h | 1 +
> >>>> include/hw/virtio/virtio-pmem.h | 42 +++++
> >>>> include/standard-headers/linux/virtio_ids.h | 1 +
> >>>> qapi/misc.json | 26 ++-
> >>>> 8 files changed, 371 insertions(+), 1 deletion(-)
> >>>> create mode 100644 hw/virtio/virtio-pmem.c
> >>>> create mode 100644 include/hw/virtio/virtio-pmem.h
> >>>>
> >>>> diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
> >>>> index 1b2799cfd8..7f914d45d0 100644
> >>>> --- a/hw/virtio/Makefile.objs
> >>>> +++ b/hw/virtio/Makefile.objs
> >>>> @@ -10,6 +10,9 @@ obj-$(CONFIG_VIRTIO_CRYPTO) += virtio-crypto.o
> >>>> obj-$(call land,$(CONFIG_VIRTIO_CRYPTO),$(CONFIG_VIRTIO_PCI)) +=
> >>>> virtio-crypto-pci.o
> >>>>
> >>>> obj-$(CONFIG_LINUX) += vhost.o vhost-backend.o vhost-user.o
> >>>> +ifeq ($(CONFIG_MEM_HOTPLUG),y)
> >>>> +obj-$(CONFIG_LINUX) += virtio-pmem.o
> >>>> +endif
> >>>> obj-$(CONFIG_VHOST_VSOCK) += vhost-vsock.o
> >>>> endif
> >>>>
> >>>> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> >>>> index 3a01fe90f0..93d3fc05c7 100644
> >>>> --- a/hw/virtio/virtio-pci.c
> >>>> +++ b/hw/virtio/virtio-pci.c
> >>>> @@ -2521,6 +2521,49 @@ static const TypeInfo virtio_rng_pci_info = {
> >>>> .class_init = virtio_rng_pci_class_init,
> >>>> };
> >>>>
> >>>> +/* virtio-pmem-pci */
> >>>> +
> >>>> +static void virtio_pmem_pci_realize(VirtIOPCIProxy *vpci_dev, Error
> >>>> **errp)
> >>>> +{
> >>>> + VirtIOPMEMPCI *vpmem = VIRTIO_PMEM_PCI(vpci_dev);
> >>>> + DeviceState *vdev = DEVICE(&vpmem->vdev);
> >>>> +
> >>>> + qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
> >>>> + object_property_set_bool(OBJECT(vdev), true, "realized", errp);
> >>>> +}
> >>>> +
> >>>> +static void virtio_pmem_pci_class_init(ObjectClass *klass, void *data)
> >>>> +{
> >>>> + DeviceClass *dc = DEVICE_CLASS(klass);
> >>>> + VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
> >>>> + PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
> >>>> + k->realize = virtio_pmem_pci_realize;
> >>>> + set_bit(DEVICE_CATEGORY_MISC, dc->categories);
> >>>> + pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
> >>>> + pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_PMEM;
> >>>> + pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
> >>>> + pcidev_k->class_id = PCI_CLASS_OTHERS;
> >>>> +}
> >>>> +
> >>>> +static void virtio_pmem_pci_instance_init(Object *obj)
> >>>> +{
> >>>> + VirtIOPMEMPCI *dev = VIRTIO_PMEM_PCI(obj);
> >>>> +
> >>>> + virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
> >>>> + TYPE_VIRTIO_PMEM);
> >>>> + object_property_add_alias(obj, "memdev", OBJECT(&dev->vdev), "memdev",
> >>>> + &error_abort);
> >>>> +}
> >>>> +
> >>>> +static const TypeInfo virtio_pmem_pci_info = {
> >>>> + .name = TYPE_VIRTIO_PMEM_PCI,
> >>>> + .parent = TYPE_VIRTIO_PCI,
> >>>> + .instance_size = sizeof(VirtIOPMEMPCI),
> >>>> + .instance_init = virtio_pmem_pci_instance_init,
> >>>> + .class_init = virtio_pmem_pci_class_init,
> >>>> +};
> >>>> +
> >>>> +
> >>>> /* virtio-input-pci */
> >>>>
> >>>> static Property virtio_input_pci_properties[] = {
> >>>> @@ -2714,6 +2757,7 @@ static void virtio_pci_register_types(void)
> >>>> type_register_static(&virtio_balloon_pci_info);
> >>>> type_register_static(&virtio_serial_pci_info);
> >>>> type_register_static(&virtio_net_pci_info);
> >>>> + type_register_static(&virtio_pmem_pci_info);
> >>>> #ifdef CONFIG_VHOST_SCSI
> >>>> type_register_static(&vhost_scsi_pci_info);
> >>>> #endif
> >>>> diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
> >>>> index 813082b0d7..fe74fcad3f 100644
> >>>> --- a/hw/virtio/virtio-pci.h
> >>>> +++ b/hw/virtio/virtio-pci.h
> >>>> @@ -19,6 +19,7 @@
> >>>> #include "hw/virtio/virtio-blk.h"
> >>>> #include "hw/virtio/virtio-net.h"
> >>>> #include "hw/virtio/virtio-rng.h"
> >>>> +#include "hw/virtio/virtio-pmem.h"
> >>>> #include "hw/virtio/virtio-serial.h"
> >>>> #include "hw/virtio/virtio-scsi.h"
> >>>> #include "hw/virtio/virtio-balloon.h"
> >>>> @@ -57,6 +58,7 @@ typedef struct VirtIOInputHostPCI VirtIOInputHostPCI;
> >>>> typedef struct VirtIOGPUPCI VirtIOGPUPCI;
> >>>> typedef struct VHostVSockPCI VHostVSockPCI;
> >>>> typedef struct VirtIOCryptoPCI VirtIOCryptoPCI;
> >>>> +typedef struct VirtIOPMEMPCI VirtIOPMEMPCI;
> >>>>
> >>>> /* virtio-pci-bus */
> >>>>
> >>>> @@ -274,6 +276,18 @@ struct VirtIOBlkPCI {
> >>>> VirtIOBlock vdev;
> >>>> };
> >>>>
> >>>> +/*
> >>>> + * virtio-pmem-pci: This extends VirtioPCIProxy.
> >>>> + */
> >>>> +#define TYPE_VIRTIO_PMEM_PCI "virtio-pmem-pci"
> >>>> +#define VIRTIO_PMEM_PCI(obj) \
> >>>> + OBJECT_CHECK(VirtIOPMEMPCI, (obj), TYPE_VIRTIO_PMEM_PCI)
> >>>> +
> >>>> +struct VirtIOPMEMPCI {
> >>>> + VirtIOPCIProxy parent_obj;
> >>>> + VirtIOPMEM vdev;
> >>>> +};
> >>>> +
> >>>> /*
> >>>> * virtio-balloon-pci: This extends VirtioPCIProxy.
> >>>> */
> >>>> diff --git a/hw/virtio/virtio-pmem.c b/hw/virtio/virtio-pmem.c
> >>>> new file mode 100644
> >>>> index 0000000000..08c96d7e80
> >>>> --- /dev/null
> >>>> +++ b/hw/virtio/virtio-pmem.c
> >>>> @@ -0,0 +1,241 @@
> >>>> +/*
> >>>> + * Virtio pmem device
> >>>> + *
> >>>> + * Copyright (C) 2018 Red Hat, Inc.
> >>>> + * Copyright (C) 2018 Pankaj Gupta <pagupta@redhat.com>
> >>>> + *
> >>>> + * This work is licensed under the terms of the GNU GPL, version 2.
> >>>> + * See the COPYING file in the top-level directory.
> >>>> + *
> >>>> + */
> >>>> +
> >>>> +#include "qemu/osdep.h"
> >>>> +#include "qapi/error.h"
> >>>> +#include "qemu-common.h"
> >>>> +#include "qemu/error-report.h"
> >>>> +#include "hw/virtio/virtio-access.h"
> >>>> +#include "hw/virtio/virtio-pmem.h"
> >>>> +#include "hw/mem/memory-device.h"
> >>>> +#include "block/aio.h"
> >>>> +#include "block/thread-pool.h"
> >>>> +
> >>>> +typedef struct VirtIOPMEMresp {
> >>>> + int ret;
> >>>> +} VirtIOPMEMResp;
> >>>> +
> >>>> +typedef struct VirtIODeviceRequest {
> >>>> + VirtQueueElement elem;
> >>>> + int fd;
> >>>> + VirtIOPMEM *pmem;
> >>>> + VirtIOPMEMResp resp;
> >>>> +} VirtIODeviceRequest;
> >>>> +
> >>>> +static int worker_cb(void *opaque)
> >>>> +{
> >>>> + VirtIODeviceRequest *req = opaque;
> >>>> + int err = 0;
> >>>> +
> >>>> + /* flush raw backing image */
> >>>> + err = fsync(req->fd);
> >>>> + if (err != 0) {
> >>>> + err = errno;
> >>>> + }
> >>>> + req->resp.ret = err;
> >>>
> >>> Host question: are you returning the guest errno code to the host?
> >>
> >> No. I am returning error code from the host in-case of host fsync
> >> failure, otherwise returning zero.
> >
> > I think that's what Luiz meant. errno constants are not portable
> > between operating systems and architectures. Therefore they cannot be
> > used in external interfaces in software that expects to communicate with
> > other systems.
> >
> > It will be necessary to define specific constants for virtio-pmem
> > instead of passing errno from the host to guest.
> >
>
> In general, I wonder if we should report errors at all or rather *kill*
> the guest. That might sound harsh, but think about the following scenario:
I almost sure that I read in the nvdimm spec that real hardware will
cause a memory error on sync or read/write error. If we truly want
to emulate this, then I guess QEMU should be able to inject a memory
error for the entire region instead of returning the fsync() error
to the guest.
> fsync() fails due to some block that cannot e.g. be written (e.g.
> network connection failed). What happens if our guest tries to
> read/write that mmaped block? (e.g. network connection failed).
I think it gets a SIGBUS? Btw, I think that QEMU already has the
machinery to turn a SIGBUS into an memory error in the guest.
> I assume we'll get a signal an get killed? So we are trying to optimize
> one special case (fsync()) although every read/write is prone to kill
> the guest. And as soon as the guest will try to access the block that
> made fsync fail, we will crash the guest either way.
I think you have a point.
>
> I assume the main problem is that we are trying to take a file (with all
> the errors that can happen during read/write/fsync) and make it look
> like memory (dax). On ordinary block access, we can forward errors, but
> not if it's memory (maybe using MCE, but it's complicated and
> architecture specific).
>
> So I wonder if we should rather assume that our backend file is placed
> on some stable storage that cannot easily fail.
>
> (we might have the same problem with NVDIMM right now, at least the
> memory reading/writing part)
>
> It's complicated and I am not a block level expert :)
>
> > Stefan
> >
>
>
next prev parent reply other threads:[~2018-07-19 15:49 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 7:52 [RFC v3 0/2] kvm "fake DAX" device flushing Pankaj Gupta
2018-07-13 7:52 ` [RFC v3 1/2] libnvdimm: Add flush callback for virtio pmem Pankaj Gupta
2018-07-13 20:35 ` Luiz Capitulino
2018-07-16 8:13 ` Pankaj Gupta
2018-07-13 7:52 ` [RFC v3 2/2] virtio-pmem: Add virtio pmem driver Pankaj Gupta
2018-07-13 20:38 ` Luiz Capitulino
2018-07-16 11:46 ` [Qemu-devel] " Pankaj Gupta
2018-07-16 14:03 ` Luiz Capitulino
2018-07-16 15:11 ` Pankaj Gupta
2018-07-17 13:11 ` Stefan Hajnoczi
2018-07-18 7:05 ` Pankaj Gupta
2018-07-13 7:52 ` [RFC v3] qemu: Add virtio pmem device Pankaj Gupta
2018-07-18 12:55 ` Luiz Capitulino
2018-07-19 5:48 ` [Qemu-devel] " Pankaj Gupta
2018-07-19 12:16 ` Stefan Hajnoczi
2018-07-19 12:48 ` Luiz Capitulino
2018-07-19 12:57 ` Luiz Capitulino
2018-07-20 13:04 ` Pankaj Gupta
2018-07-19 13:58 ` David Hildenbrand
2018-07-19 15:48 ` Luiz Capitulino [this message]
2018-07-20 13:02 ` Pankaj Gupta
2018-07-19 12:39 ` Luiz Capitulino
2018-07-24 16:13 ` Eric Blake
2018-07-25 5:01 ` [Qemu-devel] " Pankaj Gupta
2018-07-25 12:19 ` Eric Blake
2018-07-25 12:47 ` Pankaj Gupta
2018-08-28 12:13 ` [RFC v3 0/2] kvm "fake DAX" device flushing David Hildenbrand
2018-08-28 12:39 ` [Qemu-devel] " Pankaj Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180719114859.29348ed4@doriath \
--to=lcapitulino@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=haozhong.zhang@intel.com \
--cc=hch@infradead.org \
--cc=imammedo@redhat.com \
--cc=jack@suse.cz \
--cc=kvm@vger.kernel.org \
--cc=kwolf@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvdimm@ml01.01.org \
--cc=mst@redhat.com \
--cc=nilal@redhat.com \
--cc=niteshnarayanlal@hotmail.com \
--cc=pagupta@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=riel@surriel.com \
--cc=ross.zwisler@intel.com \
--cc=stefanha@redhat.com \
--cc=xiaoguangrong.eric@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).