* [PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on emmc
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 02/26] ARM: tegra: colibri_t30: add local-mac-address property Marcel Ziswiler
` (24 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Avoid eMMC issues by specifying broken-hpi.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 526ed71cf7a3..6293422c977a 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -430,8 +430,16 @@
/* eMMC */
sdhci@78000600 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
bus-width = <8>;
non-removable;
+
+ emmc: emmc@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
};
/* EHCI instance 1: USB2_DP/N -> AX88772B */
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 02/26] ARM: tegra: colibri_t30: add local-mac-address property
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on emmc Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 03/26] ARM: tegra: colibri_t30: reorder host1x/hdmi properties Marcel Ziswiler
` (23 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add empty local-mac-address property to be filled in by boot loader
(e.g. U-Boot).
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 6293422c977a..5cceb69743bc 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -445,6 +445,13 @@
/* EHCI instance 1: USB2_DP/N -> AX88772B */
usb@7d004000 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@7d004000 {
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 03/26] ARM: tegra: colibri_t30: reorder host1x/hdmi properties
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on emmc Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 02/26] ARM: tegra: colibri_t30: add local-mac-address property Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 04/26] ARM: tegra: colibri_t30: regulator clean-up Marcel Ziswiler
` (22 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reorder Host1x/HDMI properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 5cceb69743bc..a4c2fbf270ff 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -16,12 +16,11 @@
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <&avdd_hdmi_pll_1v8_reg>;
+ vdd-supply = <&avdd_hdmi_3v3_reg>;
};
};
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 04/26] ARM: tegra: colibri_t30: regulator clean-up
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (2 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 03/26] ARM: tegra: colibri_t30: reorder host1x/hdmi properties Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 05/26] ARM: tegra: colibri_t30: add missing regulators Marcel Ziswiler
` (21 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Just cosmetic regulator clean-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 52 +++++------
arch/arm/boot/dts/tegra30-colibri.dtsi | 126 +++++++++++---------------
2 files changed, 78 insertions(+), 100 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 16e1f387aa6d..5eb665d89435 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -105,7 +105,7 @@
usb-phy@7d000000 {
status = "okay";
dr_mode = "otg";
- vbus-supply = <&usbc_vbus_reg>;
+ vbus-supply = <®_usbc_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
@@ -115,7 +115,7 @@
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
backlight: backlight {
@@ -181,34 +181,28 @@
};
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- usbc_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbc_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&sys_5v0_reg>;
- };
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
- /* USBH_PEN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index a4c2fbf270ff..c58bd41a68ae 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -19,8 +19,8 @@
nvidia,ddc-i2c-bus = <&hdmiddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
- vdd-supply = <&avdd_hdmi_3v3_reg>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
@@ -229,8 +229,8 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <®_module_3v3>;
+ VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
@@ -247,19 +247,18 @@
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
@@ -267,17 +266,15 @@
/* SW2: unused */
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
@@ -288,10 +285,10 @@
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also 3v3 fixed supply
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -299,9 +296,8 @@
/* LDO3: unused */
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
@@ -309,10 +305,10 @@
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
@@ -324,22 +320,20 @@
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
@@ -471,50 +465,40 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 05/26] ARM: tegra: colibri_t30: add missing regulators
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (3 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 04/26] ARM: tegra: colibri_t30: regulator clean-up Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 06/26] ARM: tegra: colibri_t30: annotate uarts Marcel Ziswiler
` (20 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add missing regulators:
- reg_module_3v3_audio being VDDA supply of SGTL5000
- VDDD supply of SGTL5000 actually being reg_1v8_vio
- reg_lan_v_bus being USB Ethernet chip vbus supply
- carrier board HDMI supply being reg_5v0
- carrier board reg_3v3 actually being backlight and panel power supply
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 10 ++++++++++
arch/arm/boot/dts/tegra30-colibri.dtsi | 21 ++++++++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5eb665d89435..1c057b285153 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -29,6 +29,7 @@
};
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
@@ -127,6 +128,7 @@
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
};
clocks {
@@ -159,6 +161,7 @@
compatible = "edt,et057090dhu", "simple-panel";
backlight = <&backlight>;
+ power-supply = <®_3v3>;
};
pwmleds {
@@ -181,6 +184,13 @@
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index c58bd41a68ae..fedcd2f7912b 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -229,7 +229,8 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <®_module_3v3>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
@@ -450,6 +451,7 @@
usb-phy@7d004000 {
status = "okay";
nvidia,is-wired = <1>;
+ vbus-supply = <®_lan_v_bus>;
};
clocks {
@@ -493,6 +495,15 @@
regulator-always-on;
};
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
+
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
@@ -501,6 +512,14 @@
regulator-always-on;
};
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
sound {
compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
"nvidia,tegra-audio-sgtl5000";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 06/26] ARM: tegra: colibri_t30: annotate uarts
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (4 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 05/26] ARM: tegra: colibri_t30: add missing regulators Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 07/26] ARM: tegra: colibri_t30: white-space clean-up Marcel Ziswiler
` (19 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Annotate UARTs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 1c057b285153..5b32a70ceff2 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -33,15 +33,18 @@
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
serial@70006040 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Colibri UART-B */
serial@70006300 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 07/26] ARM: tegra: colibri_t30: white-space clean-up
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (5 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 06/26] ARM: tegra: colibri_t30: annotate uarts Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 08/26] ARM: tegra: colibri_t30: move dr_mode property from phy to controller Marcel Ziswiler
` (18 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
White-space clean-up.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5b32a70ceff2..19af6ccd57b2 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -27,6 +27,7 @@
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
hdmi-supply = <®_5v0>;
@@ -78,6 +79,7 @@
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
+
can0: can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
@@ -86,6 +88,7 @@
interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
spi-max-frequency = <10000000>;
};
+
spidev0: spi@1 {
compatible = "spidev";
reg = <1>;
@@ -124,7 +127,6 @@
backlight: backlight {
compatible = "pwm-backlight";
-
/* PWM<A> */
pwms = <&pwm 0 5000000>;
brightness-levels = <255 128 64 32 16 8 4 0>;
@@ -162,7 +164,6 @@
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
power-supply = <®_3v3>;
};
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 08/26] ARM: tegra: colibri_t30: move dr_mode property from phy to controller
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (6 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 07/26] ARM: tegra: colibri_t30: white-space clean-up Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 09/26] ARM: tegra: colibri_t30: reorder backlight properties Marcel Ziswiler
` (17 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Move dr_mode property from USB PHY node to controller.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 19af6ccd57b2..70d3a89825a4 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -107,11 +107,11 @@
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
vbus-supply = <®_usbc_vbus>;
};
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 09/26] ARM: tegra: colibri_t30: reorder backlight properties
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (7 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 08/26] ARM: tegra: colibri_t30: move dr_mode property from phy to controller Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 10/26] ARM: tegra: colibri_t30: drop pwmleds Marcel Ziswiler
` (16 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reorder backlight properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 70d3a89825a4..a3c607d07a1b 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -127,13 +127,12 @@
backlight: backlight {
compatible = "pwm-backlight";
- /* PWM<A> */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
};
clocks {
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 10/26] ARM: tegra: colibri_t30: drop pwmleds
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (8 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 09/26] ARM: tegra: colibri_t30: reorder backlight properties Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 11/26] ARM: tegra: colibri_t30: pinmux clean-up Marcel Ziswiler
` (15 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Drop pwmleds in favour of using regular PWMs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index a3c607d07a1b..621cd15cdfd1 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -167,26 +167,6 @@
power-supply = <®_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwmb {
- label = "PWM<B>";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
- pwmc {
- label = "PWM<C>";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
- pwmd {
- label = "PWM<D>";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
- };
-
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V_SW";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 11/26] ARM: tegra: colibri_t30: pinmux clean-up
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (9 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 10/26] ARM: tegra: colibri_t30: drop pwmleds Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 12/26] ARM: tegra: colibri_t30: add missing pinmux Marcel Ziswiler
` (14 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Clean-up pinmuxing:
- white-space clean-up
- explicitly disable LCD_M1 in favour of LCD_DE on L_BIAS
- explicitly disable multiplexed SSPFRM and SSPTXD
- get rid of nvidia,lock property
- add missing eMMC sdmmc4_cmd_pt7 and explicitly enable input
- explicitly disable lcd_dc1_pd2 (e.g. LM95245 I2C address pin)
- annotate TOUCH_PEN_INT# being on-module
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 32 ++++++++++++++++++--------------
1 file changed, 18 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index fedcd2f7912b..55dcd9d0dcce 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -38,10 +38,10 @@
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -79,9 +79,9 @@
lcd_m1_pw1 {
nvidia,pins = "lcd_m1_pw1";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Colibri MMC */
@@ -112,12 +112,14 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Multiplexed SSPFRM, SSPTXD and therefore disabled */
sdmmc3_dat6_pd3 {
nvidia,pins = "sdmmc3_dat6_pd3",
"sdmmc3_dat7_pd4";
nvidia,function = "spdif";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Colibri UART_A */
@@ -155,13 +157,15 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* eMMC */
+ /* eMMC (On-module) */
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
@@ -175,6 +179,7 @@
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Power I2C (On-module) */
@@ -185,7 +190,6 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
@@ -197,12 +201,12 @@
lcd_dc1_pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 12/26] ARM: tegra: colibri_t30: add missing pinmux
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (10 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 11/26] ARM: tegra: colibri_t30: pinmux clean-up Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811 Marcel Ziswiler
` (13 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Explicitly mux all T30 SoC balls now:
- Colibri Address/Data Bus (GMI)
- Colibri DDC
- Colibri EXT_IO*
- Colibri GPIO
- Colibri HOTPLUG_DETECT (HDMI)
- Colibri I2C
- Colibri LCD (L_* resp. LDD<*>)
- Colibri MMC_CD
- Colibri nRESET_OUT
- Colibri Parallel Camera (Optional)
- Colibri PWM<B>, <C>, <D>
- Colibri VGA
- Colibri USBC_DET
- Colibri USBH_PEN
- Colibri USBH_OC
- on-module AX88772B LAN control signals
- Colibri nBATT_FAULT(SENSE) and nVDD_FAULT(SENSE
- not connected and therefore disabled signals
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 486 +++++++++++++++++++++++++++++++++
1 file changed, 486 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 55dcd9d0dcce..c80b9bf44752 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -47,6 +47,156 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri Address/Data Bus (GMI) */
+ gmi_ad0_pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_cs0_n_px6",
+ "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2",
+ "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ dap4_din_pp5 {
+ nvidia,pins = "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7",
+ "pbb7",
+ "sdmmc1_clk_pz0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat3_py4",
+ "uart3_cts_n_pa1",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd_d18_pm2 {
+ nvidia,pins = "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_dc0_pn6",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd_cs0_n_pn4 {
+ nvidia,pins = "lcd_cs0_n_pn4",
+ "lcd_sdin_pz2",
+ "pu0",
+ "pu1",
+ "pu2",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pu6",
+ "spi1_miso_px7",
+ "uart3_rts_n_pc0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd_pwr0_pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed RDnWR and therefore disabled */
+ lcd_cs1_n_pw0 {
+ nvidia,pins = "lcd_cs1_n_pw0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Multiplexed GMI_CLK and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+ sdmmc3_dat4_pd1 {
+ nvidia,pins = "sdmmc3_dat4_pd1";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+ sdmmc3_dat5_pd0 {
+ nvidia,pins = "sdmmc3_dat5_pd0";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Colibri BL_ON */
pv2 {
nvidia,pins = "pv2";
@@ -72,6 +222,113 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Colibri DDC */
+ ddc_scl_pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri EXT_IO* */
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spdif_in_pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri GPIO */
+ clk2_out_pw5 {
+ nvidia,pins = "clk2_out_pw5",
+ "pcc2",
+ "pv3",
+ "sdmmc1_dat2_py5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd_pwr1_pc1 {
+ nvidia,pins = "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv1 {
+ nvidia,pins = "pv1",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hdmi_int_pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ gen1_i2c_scl_pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd_d0_pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
/*
* Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
* todays display need DE, disable LCD_M1
@@ -101,6 +358,105 @@
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri MMC_CD */
+ gmi_wp_n_pc7 {
+ nvidia,pins = "gmi_wp_n_pc7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ cam_mclk_pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri nRESET_OUT */
+ gmi_rst_n_pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ */
+ vi_vsync_pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_mclk_pt1",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<B> */
+ sdmmc3_dat2_pb5 {
+ nvidia,pins = "sdmmc3_dat2_pb5";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<C> */
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<D> */
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
/* Colibri SSP */
ulpi_clk_py0 {
@@ -122,6 +478,16 @@
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri VGA not supported and therefore disabled */
+ crt_hsync_pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Colibri UART_A */
ulpi_data0 {
nvidia,pins = "ulpi_data0_po1",
@@ -157,6 +523,32 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri USBC_DET */
+ spdif_out_pk5 {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ spi2_cs1_n_pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ spi2_cs2_n_pw3, {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* eMMC (On-module) */
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
@@ -182,6 +574,100 @@
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+ pex_l0_rst_n_pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1",
+ "pex_wake_n_pdd3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN_V_BUS, LAN_RESET# (On-module) */
+ pex_l0_clkreq_n_pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2",
+ "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+ pex_l2_rst_n_pcc6 {
+ nvidia,pins = "pex_l2_rst_n_pcc6",
+ "pex_l2_prsnt_n_pdd7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk1_req_pee2 {
+ nvidia,pins = "clk1_req_pee2",
+ "pex_l1_prsnt_n_pdd4";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "hdmi_cec_pee3",
+ "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_dqs_pi2 {
+ nvidia,pins = "gmi_dqs_pi2",
+ "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_col5_pq5",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_col0_pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row0_pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd_pwr2_pc6 {
+ nvidia,pins = "lcd_pwr2_pc6";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Power I2C (On-module) */
pwr_i2c_scl_pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (11 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 12/26] ARM: tegra: colibri_t30: add missing pinmux Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-26 8:07 ` Stefan Agner
2018-07-23 12:36 ` [PATCH 14/26] ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation Marcel Ziswiler
` (12 subsequent siblings)
25 siblings, 1 reply; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Use proper irq-gpio for stmpe811 touch controller.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index c80b9bf44752..ace72a53186a 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -836,8 +836,7 @@
stmpe811@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
2018-07-23 12:36 ` [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811 Marcel Ziswiler
@ 2018-07-26 8:07 ` Stefan Agner
2018-08-29 14:56 ` Marcel Ziswiler
0 siblings, 1 reply; 30+ messages in thread
From: Stefan Agner @ 2018-07-26 8:07 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: devicetree, linux-tegra, linux-kernel, Marcel Ziswiler,
Thierry Reding, Jonathan Hunter, Rob Herring, Mark Rutland,
linux-tegra-owner
On 23.07.2018 14:36, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Use proper irq-gpio for stmpe811 touch controller.
I don't think this change is necessary, interrupts/interrupt-parent
specification seems to be supported by the driver as well.
--
Stefan
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
> arch/arm/boot/dts/tegra30-colibri.dtsi | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
> b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index c80b9bf44752..ace72a53186a 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -836,8 +836,7 @@
> stmpe811@41 {
> compatible = "st,stmpe811";
> reg = <0x41>;
> - interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
> - interrupt-parent = <&gpio>;
> + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
> interrupt-controller;
> id = <0>;
> blocks = <0x5>;
^ permalink raw reply [flat|nested] 30+ messages in thread* Re: [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
2018-07-26 8:07 ` Stefan Agner
@ 2018-08-29 14:56 ` Marcel Ziswiler
0 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-08-29 14:56 UTC (permalink / raw)
To: stefan
Cc: linux-kernel, robh+dt, jonathanh, linux-tegra-owner, devicetree,
thierry.reding, mark.rutland, linux-tegra
On Thu, 2018-07-26 at 10:07 +0200, Stefan Agner wrote:
> On 23.07.2018 14:36, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> > Use proper irq-gpio for stmpe811 touch controller.
>
> I don't think this change is necessary, interrupts/interrupt-parent
> specification seems to be supported by the driver as well.
Yes, however, should you look at the driver more closely you may notice
that only if using irq-gpio the GPIO in question also does get properly
requested by devm_gpio_request_one() with an "stmpe" label. So I really
do think doing it this way is advantageous. I did notice this
difference by chance when fighting some probe defer issues earlier.
> --
> Stefan
>
> >
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> >
> > ---
> >
> > arch/arm/boot/dts/tegra30-colibri.dtsi | 3 +--
> > 1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
> > b/arch/arm/boot/dts/tegra30-colibri.dtsi
> > index c80b9bf44752..ace72a53186a 100644
> > --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> > +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> > @@ -836,8 +836,7 @@
> > stmpe811@41 {
> > compatible = "st,stmpe811";
> > reg = <0x41>;
> > - interrupts = <TEGRA_GPIO(V, 0)
> > IRQ_TYPE_LEVEL_LOW>;
> > - interrupt-parent = <&gpio>;
> > + irq-gpio = <&gpio TEGRA_GPIO(V, 0)
> > IRQ_TYPE_LEVEL_LOW>;
> > interrupt-controller;
> > id = <0>;
> > blocks = <0x5>;
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 14/26] ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (12 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811 Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip Marcel Ziswiler
` (11 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Further LM95245 temperature sensor annotation.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index ace72a53186a..8266e42e1630 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -870,7 +870,7 @@
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (13 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 14/26] ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-25 11:14 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 16/26] ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies Marcel Ziswiler
` (10 subsequent siblings)
25 siblings, 1 reply; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add i2c-thermtrip which would set the DEV_OFF bit in the DCDC control
register of the TPS65911 PMIC.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 8266e42e1630..6608243e1d55 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -902,6 +902,14 @@
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3e>;
+ nvidia,reg-data = <0x1>;
+ };
};
ahub@70080000 {
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* Re: [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip
2018-07-23 12:36 ` [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip Marcel Ziswiler
@ 2018-07-25 11:14 ` Marcel Ziswiler
0 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-25 11:14 UTC (permalink / raw)
To: linux-kernel, linux-tegra, devicetree
Cc: jonathanh, mark.rutland, thierry.reding, robh+dt
On Mon, 2018-07-23 at 14:36 +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Add i2c-thermtrip which would set the DEV_OFF bit in the DCDC control
> register of the TPS65911 PMIC.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
> arch/arm/boot/dts/tegra30-colibri.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
> b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 8266e42e1630..6608243e1d55 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -902,6 +902,14 @@
> nvidia,core-pwr-off-time = <0>;
> nvidia,core-power-req-active-high;
> nvidia,sys-clock-req-active-high;
> +
> + /* Set DEV_OFF bit in DCDC control register of
> TPS65911 PMIC */
> + i2c-thermtrip {
> + nvidia,i2c-controller-id = <4>;
> + nvidia,bus-addr = <0x2d>;
> + nvidia,reg-addr = <0x3e>;
When running some more tests I just realized that the reg-addr should
really be 0x3f instead. Will change this in a v2.
> + nvidia,reg-data = <0x1>;
> + };
> };
>
> ahub@70080000 {
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 16/26] ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (14 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 17/26] ARM: tegra: colibri_t30: enable emmc ddr52 mode Marcel Ziswiler
` (9 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add proper eMMC vmmc and vqmmc supplies e.g. fixing signalling voltage.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 6608243e1d55..0a2115f59e41 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -925,6 +925,8 @@
#size-cells = <0>;
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
emmc: emmc@0 {
reg = <0>;
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 17/26] ARM: tegra: colibri_t30: enable emmc ddr52 mode
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (15 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 16/26] ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 18/26] ARM: tegra: colibri_t30: rename clk to clock Marcel Ziswiler
` (8 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add mmc-ddr-1_8v property enabling eMMC DDR52 mode.
root@colibri-t30:~# cat /sys/kernel/debug/mmc1/ios
clock: 52000000 Hz
actual clock: 52000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
root@colibri-t30:~# hdparm -t /dev/mmcblk1
/dev/mmcblk1:
Timing buffered disk reads: 222 MB in 3.00 seconds = 73.92 MB/sec
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 0a2115f59e41..14ce77ebf4a5 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -927,6 +927,7 @@
non-removable;
vmmc-supply = <®_module_3v3>; /* VCC */
vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
emmc: emmc@0 {
reg = <0>;
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 18/26] ARM: tegra: colibri_t30: rename clk to clock
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (16 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 17/26] ARM: tegra: colibri_t30: enable emmc ddr52 mode Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 19/26] ARM: tegra: colibri_t30: line break long compatible property line Marcel Ziswiler
` (7 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Rename clk to clock.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 621cd15cdfd1..75373bf17b20 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -136,7 +136,7 @@
};
clocks {
- clk16m: clk@1 {
+ clk16m: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 14ce77ebf4a5..27e81ffb35c3 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -959,7 +959,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clk@0 {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 19/26] ARM: tegra: colibri_t30: line break long compatible property line
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (17 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 18/26] ARM: tegra: colibri_t30: rename clk to clock Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 20/26] ARM: tegra: colibri_t30: move input include to carrier board Marcel Ziswiler
` (6 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Line break long compatible property line.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 75373bf17b20..d888180e0507 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -5,7 +5,8 @@
/ {
model = "Toradex Colibri T30 on Colibri Evaluation Board";
- compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+ compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 20/26] ARM: tegra: colibri_t30: move input include to carrier board
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (18 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 19/26] ARM: tegra: colibri_t30: line break long compatible property line Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 21/26] ARM: tegra: colibri_t30: remove unused nvidia,is-wired property Marcel Ziswiler
` (5 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Move input include to carrier board.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 1 +
arch/arm/boot/dts/tegra30-colibri.dtsi | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index d888180e0507..08ca7cc7e0db 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra30-colibri.dtsi"
/ {
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 27e81ffb35c3..211457ea0b72 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/*
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 21/26] ARM: tegra: colibri_t30: remove unused nvidia,is-wired property
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (19 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 20/26] ARM: tegra: colibri_t30: move input include to carrier board Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 22/26] ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip Marcel Ziswiler
` (4 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Remove unused nvidia,is-wired property.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 211457ea0b72..e32109475bc8 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -949,7 +949,6 @@
usb-phy@7d004000 {
status = "okay";
- nvidia,is-wired = <1>;
vbus-supply = <®_lan_v_bus>;
};
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 22/26] ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (20 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 21/26] ARM: tegra: colibri_t30: remove unused nvidia,is-wired property Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 23/26] ARM: tegra: colibri_t30: enable hda over hdmi Marcel Ziswiler
` (3 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add GPIO hog to unreset ASIX AX88772B USB Ethernet chip.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index e32109475bc8..7f7a693f6e08 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1034,3 +1034,12 @@
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan_reset_n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+};
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 23/26] ARM: tegra: colibri_t30: enable hda over hdmi
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (21 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 22/26] ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 24/26] ARM: tegra: colibri_t30: annotate sd card detect Marcel Ziswiler
` (2 subsequent siblings)
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Enable HDA over HDMI.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 7f7a693f6e08..d3f72e567d5a 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -911,6 +911,10 @@
};
};
+ hda@70030000 {
+ status = "okay";
+ };
+
ahub@70080000 {
i2s@70080500 {
status = "okay";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 24/26] ARM: tegra: colibri_t30: annotate sd card detect
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (22 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 23/26] ARM: tegra: colibri_t30: enable hda over hdmi Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 25/26] ARM: tegra: colibri_t30: annotate ehci instance 1 Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 26/26] ARM: tegra: colibri_t30: update compatibility comment Marcel Ziswiler
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Annotate SD card detect.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 08ca7cc7e0db..c0b41faa4503 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -102,7 +102,7 @@
sdhci@78000200 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
no-1-8-v;
};
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 25/26] ARM: tegra: colibri_t30: annotate ehci instance 1
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (23 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 24/26] ARM: tegra: colibri_t30: annotate sd card detect Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
2018-07-23 12:36 ` [PATCH 26/26] ARM: tegra: colibri_t30: update compatibility comment Marcel Ziswiler
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Annotate EHCI instance 1 (USB2_DP/N) connecting to ASIX AX88772B USB to
Ethernet chip being on-module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index d3f72e567d5a..e10e0f2b6034 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -939,7 +939,7 @@
};
};
- /* EHCI instance 1: USB2_DP/N -> AX88772B */
+ /* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
usb@7d004000 {
status = "okay";
#address-cells = <1>;
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 26/26] ARM: tegra: colibri_t30: update compatibility comment
2018-07-23 12:36 [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp Marcel Ziswiler
` (24 preceding siblings ...)
2018-07-23 12:36 ` [PATCH 25/26] ARM: tegra: colibri_t30: annotate ehci instance 1 Marcel Ziswiler
@ 2018-07-23 12:36 ` Marcel Ziswiler
25 siblings, 0 replies; 30+ messages in thread
From: Marcel Ziswiler @ 2018-07-23 12:36 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Update compatibility comment.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index e10e0f2b6034..cf7637cfb47d 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -3,7 +3,7 @@
/*
* Toradex Colibri T30 Module Device Tree
- * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
*/
/ {
model = "Toradex Colibri T30";
--
2.14.4
^ permalink raw reply related [flat|nested] 30+ messages in thread