[PATCH v2] staging: rtlwifi: refactor rtl_get_tcb_desc

[PATCH v2] staging: rtlwifi: refactor rtl_get_tcb_desc

[Luke Triantafyllidis]

Refactored rtl_get_tcb_desc slightly to stay within the 80 character
line limit.

Signed-off-by: Luke Triantafyllidis <ltriant@cpan.org>
---

Changes in v2:
 - Fixed the formatting of the comments
 - Unwrapped some of the lines that were originally wrapped over multiple
   lines to stay within the 80 character limit

Note:
 - I didn't CC the first version of this patch to a public mailing list, so if
   you're not Greg KH, you probably want to look at this in its entirety

 drivers/staging/rtlwifi/base.c |  102 +++++++++++++++++++---------------------
 1 files changed, 48 insertions(+), 54 deletions(-)

diff --git a/drivers/staging/rtlwifi/base.c b/drivers/staging/rtlwifi/base.c
index e46e47d..b1b2f78 100644
--- a/drivers/staging/rtlwifi/base.c
+++ b/drivers/staging/rtlwifi/base.c
@@ -1237,67 +1237,61 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
 	if (rtl_is_tx_report_skb(hw, skb))
 		tcb_desc->use_spe_rpt = 1;
 
-	if (ieee80211_is_data(fc)) {
-		/*
-		 *we set data rate INX 0
-		 *in rtl_rc.c   if skb is special data or
-		 *mgt which need low data rate.
-		 */
-
-		/*
-		 *So tcb_desc->hw_rate is just used for
-		 *special data and mgt frames
-		 */
-		if (info->control.rates[0].idx == 0 ||
-		    ieee80211_is_nullfunc(fc)) {
-			tcb_desc->use_driver_rate = true;
-			tcb_desc->ratr_index =
-					SET_RATE_ID(RATR_INX_WIRELESS_MC);
+	if (!ieee80211_is_data(fc)) {
+		tcb_desc->use_driver_rate = true;
+		tcb_desc->ratr_index = SET_RATE_ID(RATR_INX_WIRELESS_MC);
+		tcb_desc->disable_ratefallback = 1;
+		tcb_desc->mac_id = 0;
+		tcb_desc->packet_bw = false;
 
-			tcb_desc->disable_ratefallback = 1;
-		} else {
-			/* because hw will never use hw_rate
-			 * when tcb_desc->use_driver_rate = false
-			 * so we never set highest N rate here,
-			 * and N rate will all be controlled by FW
-			 * when tcb_desc->use_driver_rate = false
-			 */
-			if (sta && sta->vht_cap.vht_supported) {
-				tcb_desc->hw_rate =
-				_rtl_get_vht_highest_n_rate(hw, sta);
-			} else {
-				if (sta && sta->ht_cap.ht_supported) {
-					tcb_desc->hw_rate =
-					    _rtl_get_highest_n_rate(hw, sta);
-				} else {
-					if (rtlmac->mode == WIRELESS_MODE_B) {
-						tcb_desc->hw_rate =
-						    rtlpriv->cfg->maps[RTL_RC_CCK_RATE11M];
-					} else {
-						tcb_desc->hw_rate =
-						    rtlpriv->cfg->maps[RTL_RC_OFDM_RATE54M];
-					}
-				}
-			}
-		}
+		return;
+	}
 
-		if (is_multicast_ether_addr(hdr->addr1))
-			tcb_desc->multicast = 1;
-		else if (is_broadcast_ether_addr(hdr->addr1))
-			tcb_desc->broadcast = 1;
+	/*
+	 * We set data rate INX 0
+	 * in rtl_rc.c if skb is special data or
+	 * mgt which need low data rate.
+	 */
 
-		_rtl_txrate_selectmode(hw, sta, tcb_desc);
-		_rtl_query_bandwidth_mode(hw, sta, tcb_desc);
-		_rtl_qurey_shortpreamble_mode(hw, tcb_desc, info);
-		_rtl_query_shortgi(hw, sta, tcb_desc, info);
-		_rtl_query_protection_mode(hw, tcb_desc, info);
-	} else {
+	/*
+	 * So tcb_desc->hw_rate is just used for
+	 * special data and mgt frames
+	 */
+	if (info->control.rates[0].idx == 0 || ieee80211_is_nullfunc(fc)) {
 		tcb_desc->use_driver_rate = true;
 		tcb_desc->ratr_index = SET_RATE_ID(RATR_INX_WIRELESS_MC);
+
 		tcb_desc->disable_ratefallback = 1;
-		tcb_desc->mac_id = 0;
-		tcb_desc->packet_bw = false;
+	} else if (sta && sta->vht_cap.vht_supported) {
+		/*
+		 * Because hw will never use hw_rate
+		 * when tcb_desc->use_driver_rate = false
+		 * so we never set highest N rate here,
+		 * and N rate will all be controlled by FW
+		 * when tcb_desc->use_driver_rate = false
+		 */
+		tcb_desc->hw_rate = _rtl_get_vht_highest_n_rate(hw, sta);
+	} else if (sta && sta->ht_cap.ht_supported) {
+		tcb_desc->hw_rate = _rtl_get_highest_n_rate(hw, sta);
+	} else {
+		enum rtl_var_map var = RTL_RC_OFDM_RATE54M;
+
+		if (rtlmac->mode == WIRELESS_MODE_B)
+			var = RTL_RC_CCK_RATE11M;
+
+		tcb_desc->hw_rate = rtlpriv->cfg->maps[var];
 	}
+
+	if (is_multicast_ether_addr(hdr->addr1))
+		tcb_desc->multicast = 1;
+	else if (is_broadcast_ether_addr(hdr->addr1))
+		tcb_desc->broadcast = 1;
+
+	_rtl_txrate_selectmode(hw, sta, tcb_desc);
+	_rtl_query_bandwidth_mode(hw, sta, tcb_desc);
+	_rtl_qurey_shortpreamble_mode(hw, tcb_desc, info);
+	_rtl_query_shortgi(hw, sta, tcb_desc, info);
+	_rtl_query_protection_mode(hw, tcb_desc, info);
 #undef SET_RATE_ID
 }
 
-- 
1.7.1