[PATCH net-next 0/9] Misc bug fixes & small enhancements for HNS3 Driver

[PATCH net-next 0/9] Misc bug fixes & small enhancements for HNS3 Driver

[Salil Mehta]

This patch-set presents some bug fixes and minor enhancements to
HNS3 Ethernet driver.

Fuyun Liang (1):
  net: hns3: Fix for information of phydev lost problem when down/up

Jian Shen (1):
  net: hns3: Fix for phy link issue when using marvell phy driver

Peng Li (2):
  net: hns3: Add support for serdes loopback selftest
  net: hns3: Add vlan filter setting by ethtool command -K

Xi Wang (1):
  net: hns3: Fix for command format parsing error in
    hclge_is_all_function_id_zero

Yunsheng Lin (4):
  net: hns3: Fix for vf vlan delete failed problem
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Set tx ring' tc info when netdev is up

 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |  32 +++++-
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h    |   2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |   7 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h |  12 +++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 113 +++++++++++++++++----
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c    |  27 ++++-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h    |   4 +-
 7 files changed, 171 insertions(+), 26 deletions(-)

-- 
2.11.0

[PATCH net-next 1/9] net: hns3: Add support for serdes loopback selftest

[Salil Mehta]

From: Peng Li <lipeng321@huawei.com>

This patch adds support for serdes loopback selftest in hns3
driver.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |  7 ++-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 12 +++++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 57 +++++++++++++++++++++-
 3 files changed, 73 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 80ba95d76260..f4710e498c59 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -53,7 +53,7 @@ static const struct hns3_stats hns3_rxq_stats[] = {
 
 #define HNS3_TQP_STATS_COUNT (HNS3_TXQ_STATS_COUNT + HNS3_RXQ_STATS_COUNT)
 
-#define HNS3_SELF_TEST_TPYE_NUM		1
+#define HNS3_SELF_TEST_TPYE_NUM		2
 #define HNS3_NIC_LB_TEST_PKT_NUM	1
 #define HNS3_NIC_LB_TEST_RING_ID	0
 #define HNS3_NIC_LB_TEST_PACKET_SIZE	128
@@ -78,6 +78,7 @@ static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop, bool en)
 		return -EOPNOTSUPP;
 
 	switch (loop) {
+	case HNAE3_MAC_INTER_LOOP_SERDES:
 	case HNAE3_MAC_INTER_LOOP_MAC:
 		ret = h->ae_algo->ops->set_loopback(h, loop, en);
 		break;
@@ -303,6 +304,10 @@ static void hns3_self_test(struct net_device *ndev,
 	st_param[HNAE3_MAC_INTER_LOOP_MAC][1] =
 			h->flags & HNAE3_SUPPORT_MAC_LOOPBACK;
 
+	st_param[HNAE3_MAC_INTER_LOOP_SERDES][0] = HNAE3_MAC_INTER_LOOP_SERDES;
+	st_param[HNAE3_MAC_INTER_LOOP_SERDES][1] =
+			h->flags & HNAE3_SUPPORT_SERDES_LOOPBACK;
+
 	if (if_running)
 		dev_close(ndev);
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index cd0a4f228470..821d4c2f84bd 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -94,6 +94,7 @@ enum hclge_opcode_type {
 	HCLGE_OPC_QUERY_LINK_STATUS	= 0x0307,
 	HCLGE_OPC_CONFIG_MAX_FRM_SIZE	= 0x0308,
 	HCLGE_OPC_CONFIG_SPEED_DUP	= 0x0309,
+	HCLGE_OPC_SERDES_LOOPBACK       = 0x0315,
 
 	/* PFC/Pause commands */
 	HCLGE_OPC_CFG_MAC_PAUSE_EN      = 0x0701,
@@ -775,6 +776,17 @@ struct hclge_reset_cmd {
 	u8 fun_reset_vfid;
 	u8 rsv[22];
 };
+
+#define HCLGE_CMD_SERDES_SERIAL_INNER_LOOP_B	BIT(0)
+#define HCLGE_CMD_SERDES_DONE_B			BIT(0)
+#define HCLGE_CMD_SERDES_SUCCESS_B		BIT(1)
+struct hclge_serdes_lb_cmd {
+	u8 mask;
+	u8 enable;
+	u8 result;
+	u8 rsv[21];
+};
+
 #define HCLGE_DEFAULT_TX_BUF		0x4000	 /* 16k  bytes */
 #define HCLGE_TOTAL_PKT_BUF		0x108000 /* 1.03125M bytes */
 #define HCLGE_DEFAULT_DV		0xA000	 /* 40k byte */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index fc813b7f20e8..99dda5051f5f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -787,9 +787,10 @@ static int hclge_get_sset_count(struct hnae3_handle *handle, int stringset)
 		    hdev->hw.mac.speed == HCLGE_MAC_SPEED_1G) {
 			count += 1;
 			handle->flags |= HNAE3_SUPPORT_MAC_LOOPBACK;
-		} else {
-			count = -EOPNOTSUPP;
 		}
+
+		count ++;
+		handle->flags |= HNAE3_SUPPORT_SERDES_LOOPBACK;
 	} else if (stringset == ETH_SS_STATS) {
 		count = ARRAY_SIZE(g_mac_stats_string) +
 			ARRAY_SIZE(g_all_32bit_stats_string) +
@@ -3670,6 +3671,55 @@ static int hclge_set_mac_loopback(struct hclge_dev *hdev, bool en)
 	return ret;
 }
 
+static int hclge_set_serdes_loopback(struct hclge_dev *hdev, bool en)
+{
+#define HCLGE_SERDES_RETRY_MS	10
+#define HCLGE_SERDES_RETRY_NUM	100
+	struct hclge_serdes_lb_cmd *req;
+	struct hclge_desc desc;
+	int ret, i = 0;
+
+	req = (struct hclge_serdes_lb_cmd *)&desc.data[0];
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_SERDES_LOOPBACK, false);
+
+	if (en) {
+		req->enable = HCLGE_CMD_SERDES_SERIAL_INNER_LOOP_B;
+		req->mask = HCLGE_CMD_SERDES_SERIAL_INNER_LOOP_B;
+	} else {
+		req->mask = HCLGE_CMD_SERDES_SERIAL_INNER_LOOP_B;
+	}
+
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"serdes loopback set fail, ret = %d\n", ret);
+		return ret;
+	}
+
+	do {
+		msleep(HCLGE_SERDES_RETRY_MS);
+		hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_SERDES_LOOPBACK,
+					   true);
+		ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+		if (ret) {
+			dev_err(&hdev->pdev->dev,
+				"serdes loopback get, ret = %d\n", ret);
+			return ret;
+		}
+	} while (++i < HCLGE_SERDES_RETRY_NUM  &&
+		 !(req->result & HCLGE_CMD_SERDES_DONE_B));
+
+	if (!(req->result & HCLGE_CMD_SERDES_DONE_B)) {
+		dev_err(&hdev->pdev->dev, "serdes loopback set timeout\n");
+		return -EBUSY;
+	} else if (!(req->result & HCLGE_CMD_SERDES_SUCCESS_B)) {
+		dev_err(&hdev->pdev->dev, "serdes loopback set failed in fw\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static int hclge_set_loopback(struct hnae3_handle *handle,
 			      enum hnae3_loop loop_mode, bool en)
 {
@@ -3681,6 +3731,9 @@ static int hclge_set_loopback(struct hnae3_handle *handle,
 	case HNAE3_MAC_INTER_LOOP_MAC:
 		ret = hclge_set_mac_loopback(hdev, en);
 		break;
+	case HNAE3_MAC_INTER_LOOP_SERDES:
+		ret = hclge_set_serdes_loopback(hdev, en);
+		break;
 	default:
 		ret = -ENOTSUPP;
 		dev_err(&hdev->pdev->dev,
-- 
2.11.0

[PATCH net-next 2/9] net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero

[Salil Mehta]

From: Xi Wang <wangxi11@huawei.com>

According to the functional specification of hardward, the first
descriptor of response from command 'lookup vlan talbe' is not valid.
Currently, the first descriptor is parsed as normal value, which will
cause an expected error.

This patch fixes this problem by skipping the first descriptor.

Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 99dda5051f5f..18ae11d8de73 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3930,7 +3930,7 @@ static bool hclge_is_all_function_id_zero(struct hclge_desc *desc)
 #define HCLGE_FUNC_NUMBER_PER_DESC 6
 	int i, j;
 
-	for (i = 0; i < HCLGE_DESC_NUMBER; i++)
+	for (i = 1; i < HCLGE_DESC_NUMBER; i++)
 		for (j = 0; j < HCLGE_FUNC_NUMBER_PER_DESC; j++)
 			if (desc[i].data[j])
 				return false;
-- 
2.11.0

[PATCH net-next 3/9] net: hns3: Fix for information of phydev lost problem when down/up

[Salil Mehta]

From: Fuyun Liang <liangfuyun1@huawei.com>

Function call of phy_connect_direct will reinitialize phydev. Some
information like advertising will be lost. Phy_connect_direct only
needs to be called once. And driver can run well. This patch adds
some functions to ensure that phy_connect_direct is called only once
to solve the information of phydev lost problem occurring when we stop
the net and open it again.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 24 +++++++++++++++++----
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c    | 25 ++++++++++++++++++----
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h    |  4 +++-
 3 files changed, 44 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 18ae11d8de73..3b7cd6744280 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3782,7 +3782,7 @@ static int hclge_ae_start(struct hnae3_handle *handle)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
-	int i, ret;
+	int i;
 
 	for (i = 0; i < vport->alloc_tqps; i++)
 		hclge_tqp_enable(hdev, i, 0, true);
@@ -3796,9 +3796,7 @@ static int hclge_ae_start(struct hnae3_handle *handle)
 	/* reset tqp stats */
 	hclge_reset_tqp_stats(handle);
 
-	ret = hclge_mac_start_phy(hdev);
-	if (ret)
-		return ret;
+	hclge_mac_start_phy(hdev);
 
 	return 0;
 }
@@ -5417,6 +5415,16 @@ static void hclge_get_mdix_mode(struct hnae3_handle *handle,
 		*tp_mdix = ETH_TP_MDI;
 }
 
+static int hclge_init_instance_hw(struct hclge_dev *hdev)
+{
+	return hclge_mac_connect_phy(hdev);
+}
+
+static void hclge_uninit_instance_hw(struct hclge_dev *hdev)
+{
+	hclge_mac_disconnect_phy(hdev);
+}
+
 static int hclge_init_client_instance(struct hnae3_client *client,
 				      struct hnae3_ae_dev *ae_dev)
 {
@@ -5436,6 +5444,13 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 			if (ret)
 				return ret;
 
+			ret = hclge_init_instance_hw(hdev);
+			if (ret) {
+			        client->ops->uninit_instance(&vport->nic,
+			                                     0);
+			        return ret;
+			}
+
 			if (hdev->roce_client &&
 			    hnae3_dev_roce_supported(hdev)) {
 				struct hnae3_client *rc = hdev->roce_client;
@@ -5498,6 +5513,7 @@ static void hclge_uninit_client_instance(struct hnae3_client *client,
 		if (client->type == HNAE3_CLIENT_ROCE)
 			return;
 		if (client->ops->uninit_instance) {
+			hclge_uninit_instance_hw(hdev);
 			client->ops->uninit_instance(&vport->nic, 0);
 			hdev->nic_client = NULL;
 			vport->nic.client = NULL;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 2065ee2fd358..85a123d40e8b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -193,7 +193,7 @@ static void hclge_mac_adjust_link(struct net_device *netdev)
 		netdev_err(netdev, "failed to configure flow control.\n");
 }
 
-int hclge_mac_start_phy(struct hclge_dev *hdev)
+int hclge_mac_connect_phy(struct hclge_dev *hdev)
 {
 	struct net_device *netdev = hdev->vport[0].nic.netdev;
 	struct phy_device *phydev = hdev->hw.mac.phydev;
@@ -213,11 +213,29 @@ int hclge_mac_start_phy(struct hclge_dev *hdev)
 	phydev->supported &= HCLGE_PHY_SUPPORTED_FEATURES;
 	phydev->advertising = phydev->supported;
 
-	phy_start(phydev);
-
 	return 0;
 }
 
+void hclge_mac_disconnect_phy(struct hclge_dev *hdev)
+{
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+
+	if (!phydev)
+		return;
+
+	phy_disconnect(phydev);
+}
+
+void hclge_mac_start_phy(struct hclge_dev *hdev)
+{
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+
+	if (!phydev)
+		return;
+
+	phy_start(phydev);
+}
+
 void hclge_mac_stop_phy(struct hclge_dev *hdev)
 {
 	struct net_device *netdev = hdev->vport[0].nic.netdev;
@@ -227,5 +245,4 @@ void hclge_mac_stop_phy(struct hclge_dev *hdev)
 		return;
 
 	phy_stop(phydev);
-	phy_disconnect(phydev);
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h
index bb3ce35e0d66..5fbf7dddb5d9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h
@@ -5,7 +5,9 @@
 #define __HCLGE_MDIO_H
 
 int hclge_mac_mdio_config(struct hclge_dev *hdev);
-int hclge_mac_start_phy(struct hclge_dev *hdev);
+int hclge_mac_connect_phy(struct hclge_dev *hdev);
+void hclge_mac_disconnect_phy(struct hclge_dev *hdev);
+void hclge_mac_start_phy(struct hclge_dev *hdev);
 void hclge_mac_stop_phy(struct hclge_dev *hdev);
 
 #endif
-- 
2.11.0

[PATCH net-next 4/9] net: hns3: Fix for phy link issue when using marvell phy driver

[Salil Mehta]

From: Jian Shen <shenjian15@huawei.com>

For marvell phy m88e1510, bit SUPPORTED_FIBRE of phydev->supported
is default on. Both phy_resume() and phy_suspend() will check the
SUPPORTED_FIBRE bit and write register of fibre page.

Currently in hns3 driver, the SUPPORTED_FIBRE bit will be cleared
after phy_connect_direct() finished. Because phy_resume() is called
in phy_connect_direct(), and phy_suspend() is called when disconnect
phy device, so the operation for fibre page register is not symmetrical.
It will cause phy link issue when reload hns3 driver.

This patch fixes it by disable the SUPPORTED_FIBRE before connecting
phy.

This is a temporary scheme for DTS2018050311542. I'm contacking with
the FAE of marvell phy, wish to get a better way to deal with it.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 85a123d40e8b..398971a062f4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -202,6 +202,8 @@ int hclge_mac_connect_phy(struct hclge_dev *hdev)
 	if (!phydev)
 		return 0;
 
+	phydev->supported &= ~SUPPORTED_FIBRE;
+
 	ret = phy_connect_direct(netdev, phydev,
 				 hclge_mac_adjust_link,
 				 PHY_INTERFACE_MODE_SGMII);
-- 
2.11.0

[PATCH net-next 5/9] net: hns3: Fix for vf vlan delete failed problem

[Salil Mehta]

From: Yunsheng Lin <linyunsheng@huawei.com>

There are only 128 entries in vf vlan table, if user has added
more than 128 vlan, fw will ignore it and disable the vf vlan
table. So when user deletes the vlan entry that has not been
set to vf vlan table, fw will return not found result and driver
treat that as error, which will cause vlan delete failed problem.

This patch fixes it by returning ok when fw returns not found
result.

Fixes: 9dba194574e3 ("{topost} net: hns3: fix for vlan table problem")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 3b7cd6744280..c88f5e6a9b77 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4684,9 +4684,17 @@ static int hclge_set_vf_vlan_common(struct hclge_dev *hdev, int vfid,
 			"Add vf vlan filter fail, ret =%d.\n",
 			req0->resp_code);
 	} else {
+#define HCLGE_VF_VLAN_DEL_NO_FOUND	1
 		if (!req0->resp_code)
 			return 0;
 
+		if (req0->resp_code == HCLGE_VF_VLAN_DEL_NO_FOUND) {
+			dev_warn(&hdev->pdev->dev,
+				 "vlan %d filter is not in vf vlan table\n",
+				 vlan);
+			return 0;
+		}
+
 		dev_err(&hdev->pdev->dev,
 			"Kill vf vlan filter fail, ret =%d.\n",
 			req0->resp_code);
-- 
2.11.0

[PATCH net-next 6/9] net: hns3: Fix desc num set to default when setting channel

[Salil Mehta]

From: Yunsheng Lin <linyunsheng@huawei.com>

When user set the channel num using "ethtool -L ethX", the desc num
of BD will set to default value, which will cause desc num set by
user lost problem.

This patch fixes it by restoring the desc num set by user when setting
channel num.

Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index c88f5e6a9b77..8510245705cc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1267,35 +1267,37 @@ static int hclge_map_tqps_to_func(struct hclge_dev *hdev, u16 func_id,
 	return ret;
 }
 
-static int  hclge_assign_tqp(struct hclge_vport *vport,
-			     struct hnae3_queue **tqp, u16 num_tqps)
+static int  hclge_assign_tqp(struct hclge_vport *vport)
 {
+	struct hnae3_knic_private_info *kinfo = &vport->nic.kinfo;
 	struct hclge_dev *hdev = vport->back;
 	int i, alloced;
 
 	for (i = 0, alloced = 0; i < hdev->num_tqps &&
-	     alloced < num_tqps; i++) {
+	     alloced < kinfo->num_tqps; i++) {
 		if (!hdev->htqp[i].alloced) {
 			hdev->htqp[i].q.handle = &vport->nic;
 			hdev->htqp[i].q.tqp_index = alloced;
-			tqp[alloced] = &hdev->htqp[i].q;
+			hdev->htqp[i].q.desc_num = kinfo->num_desc;
+			kinfo->tqp[alloced] = &hdev->htqp[i].q;
 			hdev->htqp[i].alloced = true;
 			alloced++;
 		}
 	}
-	vport->alloc_tqps = num_tqps;
+	vport->alloc_tqps = kinfo->num_tqps;
 
 	return 0;
 }
 
-static int hclge_knic_setup(struct hclge_vport *vport, u16 num_tqps)
+static int hclge_knic_setup(struct hclge_vport *vport,
+			    u16 num_tqps, u16 num_desc)
 {
 	struct hnae3_handle *nic = &vport->nic;
 	struct hnae3_knic_private_info *kinfo = &nic->kinfo;
 	struct hclge_dev *hdev = vport->back;
 	int i, ret;
 
-	kinfo->num_desc = hdev->num_desc;
+	kinfo->num_desc = num_desc;
 	kinfo->rx_buf_len = hdev->rx_buf_len;
 	kinfo->num_tc = min_t(u16, num_tqps, hdev->tm_info.num_tc);
 	kinfo->rss_size
@@ -1322,7 +1324,7 @@ static int hclge_knic_setup(struct hclge_vport *vport, u16 num_tqps)
 	if (!kinfo->tqp)
 		return -ENOMEM;
 
-	ret = hclge_assign_tqp(vport, kinfo->tqp, kinfo->num_tqps);
+	ret = hclge_assign_tqp(vport);
 	if (ret)
 		dev_err(&hdev->pdev->dev, "fail to assign TQPs %d.\n", ret);
 
@@ -1388,7 +1390,7 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps)
 	nic->numa_node_mask = hdev->numa_node_mask;
 
 	if (hdev->ae_dev->dev_type == HNAE3_DEV_KNIC) {
-		ret = hclge_knic_setup(vport, num_tqps);
+		ret = hclge_knic_setup(vport, num_tqps, hdev->num_desc);
 		if (ret) {
 			dev_err(&hdev->pdev->dev, "knic setup failed %d\n",
 				ret);
@@ -5944,7 +5946,7 @@ static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
 	/* Free old tqps, and reallocate with new tqp number when nic setup */
 	hclge_release_tqp(vport);
 
-	ret = hclge_knic_setup(vport, new_tqps_num);
+	ret = hclge_knic_setup(vport, new_tqps_num, kinfo->num_desc);
 	if (ret) {
 		dev_err(&hdev->pdev->dev, "setup nic fail, ret =%d\n", ret);
 		return ret;
-- 
2.11.0

[PATCH net-next 7/9] net: hns3: Remove tx ring BD len register in hns3_enet

[Salil Mehta]

From: Yunsheng Lin <linyunsheng@huawei.com>

There is no HNS3_RING_TX_RING_BD_LEN_REG register according
to UM, so this patch removes it.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 --
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 1 -
 2 files changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index a64d69c87f13..b7b9ee3f4d20 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2969,8 +2969,6 @@ static void hns3_init_ring_hw(struct hns3_enet_ring *ring)
 		hns3_write_dev(q, HNS3_RING_TX_RING_BASEADDR_H_REG,
 			       (u32)((dma >> 31) >> 1));
 
-		hns3_write_dev(q, HNS3_RING_TX_RING_BD_LEN_REG,
-			       hns3_buf_size2type(ring->buf_size));
 		hns3_write_dev(q, HNS3_RING_TX_RING_BD_NUM_REG,
 			       ring->desc_num / 8 - 1);
 	}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index e4b4a8f2ceaa..0f071a0f4ff9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -37,7 +37,6 @@ enum hns3_nic_state {
 #define HNS3_RING_TX_RING_BASEADDR_L_REG	0x00040
 #define HNS3_RING_TX_RING_BASEADDR_H_REG	0x00044
 #define HNS3_RING_TX_RING_BD_NUM_REG		0x00048
-#define HNS3_RING_TX_RING_BD_LEN_REG		0x0004C
 #define HNS3_RING_TX_RING_TAIL_REG		0x00058
 #define HNS3_RING_TX_RING_HEAD_REG		0x0005C
 #define HNS3_RING_TX_RING_FBDNUM_REG		0x00060
-- 
2.11.0

[PATCH net-next 8/9] net: hns3: Set tx ring' tc info when netdev is up

[Salil Mehta]

From: Yunsheng Lin <linyunsheng@huawei.com>

The HNS3_RING_TX_RING_TC_REG register is used to map tx ring to
specific tc, the tx queue to tc mapping is needed by the hardware
to do the correct tx schedule.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 24 ++++++++++++++++++++++++
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h |  1 +
 2 files changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index b7b9ee3f4d20..b28c7e142308 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2974,6 +2974,28 @@ static void hns3_init_ring_hw(struct hns3_enet_ring *ring)
 	}
 }
 
+static void hns3_init_tx_ring_tc(struct hns3_nic_priv *priv)
+{
+	struct hnae3_knic_private_info *kinfo = &priv->ae_handle->kinfo;
+	int i;
+
+	for (i = 0; i < HNAE3_MAX_TC; i++) {
+		struct hnae3_tc_info *tc_info = &kinfo->tc_info[i];
+		int j;
+
+		if (!tc_info->enable)
+			continue;
+
+		for (j = 0; j < tc_info->tqp_count; j++) {
+			struct hnae3_queue *q;
+
+			q = priv->ring_data[tc_info->tqp_offset + j].ring->tqp;
+			hns3_write_dev(q, HNS3_RING_TX_RING_TC_REG,
+				       tc_info->tc);
+		}
+	}
+}
+
 int hns3_init_all_ring(struct hns3_nic_priv *priv)
 {
 	struct hnae3_handle *h = priv->ae_handle;
@@ -3385,6 +3407,8 @@ int hns3_nic_reset_all_ring(struct hnae3_handle *h)
 		rx_ring->next_to_use = 0;
 	}
 
+	hns3_init_tx_ring_tc(priv);
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 0f071a0f4ff9..a02a96aee2a2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -37,6 +37,7 @@ enum hns3_nic_state {
 #define HNS3_RING_TX_RING_BASEADDR_L_REG	0x00040
 #define HNS3_RING_TX_RING_BASEADDR_H_REG	0x00044
 #define HNS3_RING_TX_RING_BD_NUM_REG		0x00048
+#define HNS3_RING_TX_RING_TC_REG		0x00050
 #define HNS3_RING_TX_RING_TAIL_REG		0x00058
 #define HNS3_RING_TX_RING_HEAD_REG		0x0005C
 #define HNS3_RING_TX_RING_FBDNUM_REG		0x00060
-- 
2.11.0

[PATCH net-next 9/9] net: hns3: Add vlan filter setting by ethtool command -K

[Salil Mehta]

From: Peng Li <lipeng321@huawei.com>

Revision(0x20) HW does not support enabling or disabling individual
netdev's HW_VLAN_CTAG_FILTER feature, and Revision(0x21) supports
enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER
feature.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index b28c7e142308..3554dca7a680 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1673,6 +1673,9 @@ static struct pci_driver hns3_driver = {
 /* set default feature to hns3 */
 static void hns3_set_default_feature(struct net_device *netdev)
 {
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+	struct pci_dev *pdev = h->pdev;
+
 	netdev->priv_flags |= IFF_UNICAST_FLT;
 
 	netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
@@ -1706,6 +1709,9 @@ static void hns3_set_default_feature(struct net_device *netdev)
 		NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_GRE |
 		NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_UDP_TUNNEL |
 		NETIF_F_GSO_UDP_TUNNEL_CSUM;
+
+	if (pdev->revision != 0x20)
+		netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 }
 
 static int hns3_alloc_buffer(struct hns3_enet_ring *ring,
-- 
2.11.0

Re: [PATCH net-next 1/9] net: hns3: Add support for serdes loopback selftest

[David Miller]

From: Salil Mehta <salil.mehta@huawei.com>
Date: Sun, 12 Aug 2018 10:47:30 +0100

> -#define HNS3_SELF_TEST_TPYE_NUM		1
> +#define HNS3_SELF_TEST_TPYE_NUM		2

Is this supposed to be the number of self test "types"?  If so, this CPP
macro should be named "HNS3_SELF_TEST_TYPE_NUM".

> +
> +		count ++;
                     ^

Please remove that unnecessary space.

> +	} while (++i < HCLGE_SERDES_RETRY_NUM  &&
                                             ^^

Only need one space there, not two.
					     

Re: [PATCH net-next 5/9] net: hns3: Fix for vf vlan delete failed problem

[David Miller]

From: Salil Mehta <salil.mehta@huawei.com>
Date: Sun, 12 Aug 2018 10:47:34 +0100

> Fixes: 9dba194574e3 ("{topost} net: hns3: fix for vlan table problem")

This commit ID doesn't exist.

Also, I really don't think the string "{topost}" would be in the commit
header line.

RE: [PATCH net-next 1/9] net: hns3: Add support for serdes loopback selftest

[Salil Mehta]

Hi Dave,

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Monday, August 13, 2018 4:55 PM
> To: Salil Mehta <salil.mehta@huawei.com>
> Cc: Zhuangyuzeng (Yisen) <yisen.zhuang@huawei.com>; lipeng (Y)
> <lipeng321@huawei.com>; mehta.salil.lnk@gmail.com;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Linuxarm
> <linuxarm@huawei.com>; linyunsheng <linyunsheng@huawei.com>
> Subject: Re: [PATCH net-next 1/9] net: hns3: Add support for serdes
> loopback selftest
> 
> From: Salil Mehta <salil.mehta@huawei.com>
> Date: Sun, 12 Aug 2018 10:47:30 +0100
> 
> > -#define HNS3_SELF_TEST_TPYE_NUM		1
> > +#define HNS3_SELF_TEST_TPYE_NUM		2

Sure, fixed in V2. Thanks.

> 
> Is this supposed to be the number of self test "types"?  If so, this
> CPP
> macro should be named "HNS3_SELF_TEST_TYPE_NUM".
> 
> > +
> > +		count ++;
>                      ^
> 
> Please remove that unnecessary space


Sure, fixed in V2 version, thanks.


> 
> > +	} while (++i < HCLGE_SERDES_RETRY_NUM  &&
>                                              ^^
> 
> Only need one space there, not two.

Thank you. Fixed in V2.

Best regards
Salil
 

RE: [PATCH net-next 5/9] net: hns3: Fix for vf vlan delete failed problem

[Salil Mehta]

Hi Dave,

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Monday, August 13, 2018 4:57 PM
> To: Salil Mehta <salil.mehta@huawei.com>
> Cc: Zhuangyuzeng (Yisen) <yisen.zhuang@huawei.com>; lipeng (Y)
> <lipeng321@huawei.com>; mehta.salil.lnk@gmail.com;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Linuxarm
> <linuxarm@huawei.com>; linyunsheng <linyunsheng@huawei.com>
> Subject: Re: [PATCH net-next 5/9] net: hns3: Fix for vf vlan delete
> failed problem
> 
> From: Salil Mehta <salil.mehta@huawei.com>
> Date: Sun, 12 Aug 2018 10:47:34 +0100
> 
> > Fixes: 9dba194574e3 ("{topost} net: hns3: fix for vlan table
> problem")
> 
> This commit ID doesn't exist.

Thanks for catching this. This commit ID was from our internal branch
and ideally should have been from net-next - I should have caught this
earlier, sorry for this!

I have for now dropped this patch from the series as there is another
related patch(being referred in the Fixes string) that would need to
be merged with this patch before sending to net-next. Therefore, will
refloat this patch along with other related patch later in next cycle.

> 
> Also, I really don't think the string "{topost}" would be in the commit
> header line.

Yes, this is stray and will be removed when this patch is sent next.

Thank you
Salil