* [PATCH] ARM: dts: imx6sll: add gpio-ranges property
@ 2018-07-20 10:06 Anson Huang
2018-08-21 8:31 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Anson Huang @ 2018-07-20 10:06 UTC (permalink / raw)
To: shawnguo, s.hauer, kernel, fabio.estevam, robh+dt, mark.rutland,
linux-arm-kernel, devicetree, linux-kernel
Cc: Linux-imx
Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX6SLL pinctrl driver, for details, please refer to
Documentation/devicetree/bindings/gpio/gpio.txt of "gpio-ranges"
property.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm/boot/dts/imx6sll.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 000e613..a3cf282 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -379,6 +379,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
@@ -390,6 +391,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
@@ -401,6 +403,9 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
@@ -412,6 +417,15 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
@@ -423,6 +437,17 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: imx6sll: add gpio-ranges property
2018-07-20 10:06 [PATCH] ARM: dts: imx6sll: add gpio-ranges property Anson Huang
@ 2018-08-21 8:31 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2018-08-21 8:31 UTC (permalink / raw)
To: Anson Huang
Cc: s.hauer, kernel, fabio.estevam, robh+dt, mark.rutland,
linux-arm-kernel, devicetree, linux-kernel, Linux-imx
On Fri, Jul 20, 2018 at 06:06:57PM +0800, Anson Huang wrote:
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX6SLL pinctrl driver, for details, please refer to
> Documentation/devicetree/bindings/gpio/gpio.txt of "gpio-ranges"
> property.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-08-21 8:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-20 10:06 [PATCH] ARM: dts: imx6sll: add gpio-ranges property Anson Huang
2018-08-21 8:31 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).