[PATCH v5 0/2] drm/blend: Add per-plane pixel blend mode property

[PATCH v5 0/2] drm/blend: Add per-plane pixel blend mode property

[Lowry Li]

Hi,

This serie aims at adding the support for pixel blend modes represent the
alpha blending equation selection in the driver. It also introduces to use
it in the malidp driver.

Let me know what you think,
Lowry

Changes for v5:
 - Adds comments in drm_blend.h.
 - Removes setting default value in drm_plane_create_blend_mode_property()
   as it is already in __drm_atomic_helper_plane_reset().
 - Fixes to use state->pixel_blend_mode instead of using
   plane->state->pixel_blend_mode in reset function.
 - Rebases on drm-misc-next.

Changes for v4:
 - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
   can calculate the index itself just fine, so no point in having the
   caller pass it in.
 - Since the current DRM assumption is that alpha is premultiplied as
   default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
 - Refines some comments.
 - Updates on drm/malidp, hardware limitation check only when the format
   has alpha pixel.
 - Rebases on drm-misc-next and fixed the confilcts

Changes for v3:
 - Refines the comments of drm_plane_create_blend_mode_property:
      1) Puts the descriptions (after the ":") on a new line
      2) Adds explaining why @supported_modes need PREMUL as default
 - Refines the comments of drm/mali-dp patchset
 - Rebased on drm-misc-next and fixed the confilcts with plane alpha patch

Changes for v2:
 - Moves the blending equation into the DOC comment
 - Refines the comments of drm_plane_create_blend_mode_property to not
   enumerate the #defines, but instead the string values
 - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
 - Introduces to use it in the malidp driver, which depends on the plane
   alpha patch

Changes from v1:
 - v1 is just the core changes to request for commments
 - Adds a pixel_blend_mode to drm_plane_state and a blend_mode_property
   to drm_plane, and related support functions
 - Defines three blend modes in drm_blend.h
 - Rebased on current drm-next

Lowry Li (2):
  drm: Add per-plane pixel blend mode property
  drm/mali-dp: Implement plane alpha and pixel blend on malidp

 drivers/gpu/drm/arm/malidp_planes.c |  74 +++++++++++++---------
 drivers/gpu/drm/drm_atomic.c        |   4 ++
 drivers/gpu/drm/drm_atomic_helper.c |   1 +
 drivers/gpu/drm/drm_blend.c         | 123 ++++++++++++++++++++++++++++++++++++
 include/drm/drm_blend.h             |   6 ++
 include/drm/drm_plane.h             |   9 +++
 6 files changed, 186 insertions(+), 31 deletions(-)

-- 
1.9.1

[PATCH v5 1/2] drm: Add per-plane pixel blend mode property

[Lowry Li]

Pixel blend modes represent the alpha blending equation
selection, describing how the pixels from the current
plane are composited with the background.

Adds a pixel_blend_mode to drm_plane_state and a
blend_mode_property to drm_plane, and related support
functions.

Defines three blend modes in drm_blend.h.

Changes since v1:
 - Moves the blending equation into the DOC comment
 - Refines the comments of drm_plane_create_blend_mode_property to not
   enumerate the #defines, but instead the string values
 - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
Changes since v2:
 - Refines the comments of drm_plane_create_blend_mode_property:
      1) Puts the descriptions (after the ":") on a new line
      2) Adds explaining why @supported_modes need PREMUL as default
Changes since v3:
 - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
   can calculate the index itself just fine, so no point in having the
   caller pass it in.
 - Since the current DRM assumption is that alpha is premultiplied
   as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
 - Refines some comments.
Changes since v4:
 - Adds comments in drm_blend.h.
 - Removes setting default value in drm_plane_create_blend_mode_property()
   as it is already in __drm_atomic_helper_plane_reset().
 - Fixes to use state->pixel_blend_mode instead of using
   plane->state->pixel_blend_mode in reset function.
 - Rebases on drm-misc-next.

Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Lowry Li <lowry.li@arm.com>
---
 drivers/gpu/drm/drm_atomic.c        |   4 ++
 drivers/gpu/drm/drm_atomic_helper.c |   1 +
 drivers/gpu/drm/drm_blend.c         | 123 ++++++++++++++++++++++++++++++++++++
 include/drm/drm_blend.h             |   6 ++
 include/drm/drm_plane.h             |   9 +++
 5 files changed, 143 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 3eb061e..d0478ab 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -895,6 +895,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
 		state->src_h = val;
 	} else if (property == plane->alpha_property) {
 		state->alpha = val;
+	} else if (property == plane->blend_mode_property) {
+		state->pixel_blend_mode = val;
 	} else if (property == plane->rotation_property) {
 		if (!is_power_of_2(val & DRM_MODE_ROTATE_MASK)) {
 			DRM_DEBUG_ATOMIC("[PLANE:%d:%s] bad rotation bitmask: 0x%llx\n",
@@ -968,6 +970,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
 		*val = state->src_h;
 	} else if (property == plane->alpha_property) {
 		*val = state->alpha;
+	} else if (property == plane->blend_mode_property) {
+		*val = state->pixel_blend_mode;
 	} else if (property == plane->rotation_property) {
 		*val = state->rotation;
 	} else if (property == plane->zpos_property) {
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 6dd5036..284a5d2 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -3569,6 +3569,7 @@ void __drm_atomic_helper_plane_reset(struct drm_plane *plane,
 	/* Reset the alpha value to fully opaque if it matters */
 	if (plane->alpha_property)
 		state->alpha = plane->alpha_property->values[1];
+	state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
 
 	plane->state = state;
 }
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index a16a74d..402b62d 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -107,6 +107,52 @@
  *	planes. Without this property the primary plane is always below the cursor
  *	plane, and ordering between all other planes is undefined.
  *
+ * pixel blend mode:
+ *	Pixel blend mode is set up with drm_plane_create_blend_mode_property().
+ *	It adds a blend mode for alpha blending equation selection, describing
+ *	how the pixels from the current plane are composited with the
+ *	background.
+ *
+ *	 Three alpha blending equations are defined:
+ *
+ *	 "None":
+ *		 Blend formula that ignores the pixel alpha::
+ *
+ *			 out.rgb = plane_alpha * fg.rgb +
+ *				 (1 - plane_alpha) * bg.rgb
+ *
+ *	 "Pre-multiplied":
+ *		 Blend formula that assumes the pixel color values
+ *		 have been already pre-multiplied with the alpha
+ *		 channel values::
+ *
+ *			 out.rgb = plane_alpha * fg.rgb +
+ *				 (1 - (plane_alpha * fg.alpha)) * bg.rgb
+ *
+ *	 "Coverage":
+ *		 Blend formula that assumes the pixel color values have not
+ *		 been pre-multiplied and will do so when blending them to the
+ *		 background color values::
+ *
+ *			 out.rgb = plane_alpha * fg.alpha * fg.rgb +
+ *				 (1 - (plane_alpha * fg.alpha)) * bg.rgb
+ *
+ *	 Using the following symbols:
+ *
+ *	 "fg.rgb":
+ *		 Each of the RGB component values from the plane's pixel
+ *	 "fg.alpha":
+ *		 Alpha component value from the plane's pixel. If the plane's
+ *		 pixel format has no alpha component, then this is assumed to be
+ *		 1.0. In these cases, this property has no effect, as all three
+ *		 equations become equivalent.
+ *	 "bg.rgb":
+ *		 Each of the RGB component values from the background
+ *	 "plane_alpha":
+ *		 Plane alpha value set by the plane "alpha" property. If the
+ *		 plane does not expose the "alpha" property, then this is
+ *		 assumed to be 1.0
+ *
  * Note that all the property extensions described here apply either to the
  * plane or the CRTC (e.g. for the background color, which currently is not
  * exposed and assumed to be black).
@@ -448,3 +494,80 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 	return 0;
 }
 EXPORT_SYMBOL(drm_atomic_normalize_zpos);
+
+/**
+ * drm_plane_create_blend_mode_property - create a new blend mode property
+ * @plane: drm plane
+ * @supported_modes: bitmask of supported modes, must include
+ *		     BIT(DRM_MODE_BLEND_PREMULTI). Current DRM assumption is
+ *		     that alpha is premultiplied, and old userspace can break if
+ *		     the property defaults to anything else.
+ *
+ * This creates a new property describing the blend mode.
+ *
+ * The property exposed to userspace is an enumeration property (see
+ * drm_property_create_enum()) called "pixel blend mode" and has the
+ * following enumeration values:
+ *
+ * "None":
+ *	Blend formula that ignores the pixel alpha.
+ *
+ * "Pre-multiplied":
+ *	Blend formula that assumes the pixel color values have been already
+ *	pre-multiplied with the alpha channel values.
+ *
+ * "Coverage":
+ *	Blend formula that assumes the pixel color values have not been
+ *	pre-multiplied and will do so when blending them to the background color
+ *	values.
+ *
+ * RETURNS:
+ * Zero for success or -errno
+ */
+int drm_plane_create_blend_mode_property(struct drm_plane *plane,
+					 unsigned int supported_modes)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_property *prop;
+	static const struct drm_prop_enum_list props[] = {
+		{ DRM_MODE_BLEND_PIXEL_NONE, "None" },
+		{ DRM_MODE_BLEND_PREMULTI, "Pre-multiplied" },
+		{ DRM_MODE_BLEND_COVERAGE, "Coverage" },
+	};
+	unsigned int valid_mode_mask = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+				       BIT(DRM_MODE_BLEND_PREMULTI)   |
+				       BIT(DRM_MODE_BLEND_COVERAGE);
+	int i;
+
+	if (WARN_ON((supported_modes & ~valid_mode_mask) ||
+		    ((supported_modes & BIT(DRM_MODE_BLEND_PREMULTI)) == 0)))
+		return -EINVAL;
+
+	prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				   "pixel blend mode",
+				   hweight32(supported_modes));
+	if (!prop)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		int ret;
+
+		if (!(BIT(props[i].type) & supported_modes))
+			continue;
+
+		ret = drm_property_add_enum(prop, props[i].type,
+					    props[i].name);
+
+		if (ret) {
+			drm_property_destroy(dev, prop);
+
+			return ret;
+		}
+	}
+
+	drm_object_attach_property(&plane->base, prop, DRM_MODE_BLEND_PREMULTI);
+	plane->blend_mode_property = prop;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 330c561..88bdfec 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -27,6 +27,10 @@
 #include <linux/ctype.h>
 #include <drm/drm_mode.h>
 
+#define DRM_MODE_BLEND_PREMULTI		0
+#define DRM_MODE_BLEND_COVERAGE		1
+#define DRM_MODE_BLEND_PIXEL_NONE	2
+
 struct drm_device;
 struct drm_atomic_state;
 struct drm_plane;
@@ -52,4 +56,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
 					     unsigned int zpos);
 int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
+int drm_plane_create_blend_mode_property(struct drm_plane *plane,
+					 unsigned int supported_modes);
 #endif
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index 8a152dc..35ef64a 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -117,6 +117,7 @@ struct drm_plane_state {
 	 * details.
 	 */
 	u16 alpha;
+	uint16_t pixel_blend_mode;
 
 	/**
 	 * @rotation:
@@ -659,6 +660,14 @@ struct drm_plane {
 	 * drm_plane_create_rotation_property().
 	 */
 	struct drm_property *rotation_property;
+	/**
+	 * @blend_mode_property:
+	 * Optional "pixel blend mode" enum property for this plane.
+	 * Blend mode property represents the alpha blending equation selection,
+	 * describing how the pixels from the current plane are composited with
+	 * the background.
+	 */
+	struct drm_property *blend_mode_property;
 
 	/**
 	 * @color_encoding_property:
-- 
1.9.1

[PATCH v5 2/2] drm/mali-dp: Implement plane alpha and pixel blend on malidp

[Lowry Li]

Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.

Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.

Changes since v1:
 - Introduces to use it in the malidp driver, which depends on
   the plane alpha patch
Changes since v2:
 - Refines the comments of drm/mali-dp patchset
Changes since v3:
 - Updates on drm/malidp, hardware limitation check only when
   the format has alpha pixel.
Changes since v4:
 - Rebases on drm-misc-next.

Signed-off-by: Lowry Li <lowry.li@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
---
 drivers/gpu/drm/arm/malidp_planes.c | 74 +++++++++++++++++++++----------------
 1 file changed, 43 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
index 49c37f6..17be123 100644
--- a/drivers/gpu/drm/arm/malidp_planes.c
+++ b/drivers/gpu/drm/arm/malidp_planes.c
@@ -36,6 +36,7 @@
 #define   LAYER_COMP_MASK		(0x3 << 12)
 #define   LAYER_COMP_PIXEL		(0x3 << 12)
 #define   LAYER_COMP_PLANE		(0x2 << 12)
+#define   LAYER_PMUL_ENABLE		(0x1 << 14)
 #define   LAYER_ALPHA_OFFSET		(16)
 #define   LAYER_ALPHA_MASK		(0xff)
 #define   LAYER_ALPHA(x)		(((x) & LAYER_ALPHA_MASK) << LAYER_ALPHA_OFFSET)
@@ -180,6 +181,7 @@ static int malidp_de_plane_check(struct drm_plane *plane,
 	struct malidp_plane_state *ms = to_malidp_plane_state(state);
 	bool rotated = state->rotation & MALIDP_ROTATED_MASK;
 	struct drm_framebuffer *fb;
+	u16 pixel_alpha = state->pixel_blend_mode;
 	int i, ret;
 
 	if (!state->crtc || !state->fb)
@@ -242,6 +244,11 @@ static int malidp_de_plane_check(struct drm_plane *plane,
 		ms->rotmem_size = val;
 	}
 
+	/* HW can't support plane + pixel blending */
+	if ((state->alpha != DRM_BLEND_ALPHA_OPAQUE) &&
+	    (pixel_alpha != DRM_MODE_BLEND_PIXEL_NONE))
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -323,17 +330,19 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 {
 	struct malidp_plane *mp;
 	struct malidp_plane_state *ms = to_malidp_plane_state(plane->state);
+	struct drm_plane_state *state = plane->state;
+	u16 pixel_alpha = state->pixel_blend_mode;
+	u8 plane_alpha = state->alpha >> 8;
 	u32 src_w, src_h, dest_w, dest_h, val;
 	int i;
-	bool format_has_alpha = plane->state->fb->format->has_alpha;
 
 	mp = to_malidp_plane(plane);
 
 	/* convert src values from Q16 fixed point to integer */
-	src_w = plane->state->src_w >> 16;
-	src_h = plane->state->src_h >> 16;
-	dest_w = plane->state->crtc_w;
-	dest_h = plane->state->crtc_h;
+	src_w = state->src_w >> 16;
+	src_h = state->src_h >> 16;
+	dest_w = state->crtc_w;
+	dest_h = state->crtc_h;
 
 	val = malidp_hw_read(mp->hwdev, mp->layer->base);
 	val = (val & ~LAYER_FORMAT_MASK) | ms->format;
@@ -342,14 +351,14 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	for (i = 0; i < ms->n_planes; i++) {
 		/* calculate the offset for the layer's plane registers */
 		u16 ptr = mp->layer->ptr + (i << 4);
-		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(plane->state->fb,
-							     plane->state, i);
+		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(state->fb,
+							     state, i);
 
 		malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr);
 		malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4);
 	}
 	malidp_de_set_plane_pitches(mp, ms->n_planes,
-				    plane->state->fb->pitches);
+				    state->fb->pitches);
 
 	if ((plane->state->color_encoding != old_state->color_encoding) ||
 	    (plane->state->color_range != old_state->color_range))
@@ -362,8 +371,8 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	malidp_hw_write(mp->hwdev, LAYER_H_VAL(dest_w) | LAYER_V_VAL(dest_h),
 			mp->layer->base + MALIDP_LAYER_COMP_SIZE);
 
-	malidp_hw_write(mp->hwdev, LAYER_H_VAL(plane->state->crtc_x) |
-			LAYER_V_VAL(plane->state->crtc_y),
+	malidp_hw_write(mp->hwdev, LAYER_H_VAL(state->crtc_x) |
+			LAYER_V_VAL(state->crtc_y),
 			mp->layer->base + MALIDP_LAYER_OFFSET);
 
 	if (mp->layer->id == DE_SMART)
@@ -376,38 +385,35 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	val &= ~LAYER_ROT_MASK;
 
 	/* setup the rotation and axis flip bits */
-	if (plane->state->rotation & DRM_MODE_ROTATE_MASK)
+	if (state->rotation & DRM_MODE_ROTATE_MASK)
 		val |= ilog2(plane->state->rotation & DRM_MODE_ROTATE_MASK) <<
 		       LAYER_ROT_OFFSET;
-	if (plane->state->rotation & DRM_MODE_REFLECT_X)
+	if (state->rotation & DRM_MODE_REFLECT_X)
 		val |= LAYER_H_FLIP;
-	if (plane->state->rotation & DRM_MODE_REFLECT_Y)
+	if (state->rotation & DRM_MODE_REFLECT_Y)
 		val |= LAYER_V_FLIP;
 
-	val &= ~LAYER_COMP_MASK;
-	if (format_has_alpha) {
-
-		/*
-		 * always enable pixel alpha blending until we have a way
-		 * to change blend modes
-		 */
-		val |= LAYER_COMP_PIXEL;
-	} else {
+	val &= ~(LAYER_COMP_MASK | LAYER_PMUL_ENABLE | LAYER_ALPHA(0xff));
 
-		/*
-		 * do not enable pixel alpha blending as the color channel
-		 * does not have any alpha information
-		 */
+	if (state->alpha != DRM_BLEND_ALPHA_OPAQUE) {
 		val |= LAYER_COMP_PLANE;
-
-		/* Set layer alpha coefficient to 0xff ie fully opaque */
-		val |= LAYER_ALPHA(0xff);
+	} else if (state->fb->format->has_alpha) {
+		/* We only care about blend mode if the format has alpha */
+		switch (pixel_alpha) {
+		case DRM_MODE_BLEND_PREMULTI:
+			val |= LAYER_COMP_PIXEL | LAYER_PMUL_ENABLE;
+			break;
+		case DRM_MODE_BLEND_COVERAGE:
+			val |= LAYER_COMP_PIXEL;
+			break;
+		}
 	}
+	val |= LAYER_ALPHA(plane_alpha);
 
 	val &= ~LAYER_FLOWCFG(LAYER_FLOWCFG_MASK);
-	if (plane->state->crtc) {
+	if (state->crtc) {
 		struct malidp_crtc_state *m =
-			to_malidp_crtc_state(plane->state->crtc->state);
+			to_malidp_crtc_state(state->crtc->state);
 
 		if (m->scaler_config.scale_enable &&
 		    m->scaler_config.plane_src_id == mp->layer->id)
@@ -446,6 +452,9 @@ int malidp_de_planes_init(struct drm_device *drm)
 	unsigned long crtcs = 1 << drm->mode_config.num_crtc;
 	unsigned long flags = DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 |
 			      DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
+	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+				  BIT(DRM_MODE_BLEND_PREMULTI)   |
+				  BIT(DRM_MODE_BLEND_COVERAGE);
 	u32 *formats;
 	int ret, i, j, n;
 
@@ -498,6 +507,9 @@ int malidp_de_planes_init(struct drm_device *drm)
 		malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,
 				plane->layer->base + MALIDP_LAYER_COMPOSE);
 
+		drm_plane_create_alpha_property(&plane->base);
+		drm_plane_create_blend_mode_property(&plane->base, blend_caps);
+
 		/* Attach the YUV->RGB property only to video layers */
 		if (id & (DE_VIDEO1 | DE_VIDEO2)) {
 			/* default encoding for YUV->RGB is BT601 NARROW */
-- 
1.9.1

Re: [PATCH v5 1/2] drm: Add per-plane pixel blend mode property

[Sean Paul]

On Thu, Aug 23, 2018 at 04:30:19PM +0800, Lowry Li wrote:
> Pixel blend modes represent the alpha blending equation
> selection, describing how the pixels from the current
> plane are composited with the background.
> 
> Adds a pixel_blend_mode to drm_plane_state and a
> blend_mode_property to drm_plane, and related support
> functions.
> 
> Defines three blend modes in drm_blend.h.
> 
> Changes since v1:
>  - Moves the blending equation into the DOC comment
>  - Refines the comments of drm_plane_create_blend_mode_property to not
>    enumerate the #defines, but instead the string values
>  - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
> Changes since v2:
>  - Refines the comments of drm_plane_create_blend_mode_property:
>       1) Puts the descriptions (after the ":") on a new line
>       2) Adds explaining why @supported_modes need PREMUL as default
> Changes since v3:
>  - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
>    can calculate the index itself just fine, so no point in having the
>    caller pass it in.
>  - Since the current DRM assumption is that alpha is premultiplied
>    as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
>  - Refines some comments.
> Changes since v4:
>  - Adds comments in drm_blend.h.
>  - Removes setting default value in drm_plane_create_blend_mode_property()
>    as it is already in __drm_atomic_helper_plane_reset().
>  - Fixes to use state->pixel_blend_mode instead of using
>    plane->state->pixel_blend_mode in reset function.
>  - Rebases on drm-misc-next.
> 
> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>

Reviewed-by: Sean Paul <seanpaul@chromium.org>

I've also Reviewed the userspace component in drm_hwc here:
https://gitlab.freedesktop.org/drm-hwcomposer/drm-hwcomposer/merge_requests/16#note_24690

Thanks,

Sean

> Signed-off-by: Lowry Li <lowry.li@arm.com>
> ---
>  drivers/gpu/drm/drm_atomic.c        |   4 ++
>  drivers/gpu/drm/drm_atomic_helper.c |   1 +
>  drivers/gpu/drm/drm_blend.c         | 123 ++++++++++++++++++++++++++++++++++++
>  include/drm/drm_blend.h             |   6 ++
>  include/drm/drm_plane.h             |   9 +++
>  5 files changed, 143 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 3eb061e..d0478ab 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -895,6 +895,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
>  		state->src_h = val;
>  	} else if (property == plane->alpha_property) {
>  		state->alpha = val;
> +	} else if (property == plane->blend_mode_property) {
> +		state->pixel_blend_mode = val;
>  	} else if (property == plane->rotation_property) {
>  		if (!is_power_of_2(val & DRM_MODE_ROTATE_MASK)) {
>  			DRM_DEBUG_ATOMIC("[PLANE:%d:%s] bad rotation bitmask: 0x%llx\n",
> @@ -968,6 +970,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
>  		*val = state->src_h;
>  	} else if (property == plane->alpha_property) {
>  		*val = state->alpha;
> +	} else if (property == plane->blend_mode_property) {
> +		*val = state->pixel_blend_mode;
>  	} else if (property == plane->rotation_property) {
>  		*val = state->rotation;
>  	} else if (property == plane->zpos_property) {
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 6dd5036..284a5d2 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -3569,6 +3569,7 @@ void __drm_atomic_helper_plane_reset(struct drm_plane *plane,
>  	/* Reset the alpha value to fully opaque if it matters */
>  	if (plane->alpha_property)
>  		state->alpha = plane->alpha_property->values[1];
> +	state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
>  
>  	plane->state = state;
>  }
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index a16a74d..402b62d 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -107,6 +107,52 @@
>   *	planes. Without this property the primary plane is always below the cursor
>   *	plane, and ordering between all other planes is undefined.
>   *
> + * pixel blend mode:
> + *	Pixel blend mode is set up with drm_plane_create_blend_mode_property().
> + *	It adds a blend mode for alpha blending equation selection, describing
> + *	how the pixels from the current plane are composited with the
> + *	background.
> + *
> + *	 Three alpha blending equations are defined:
> + *
> + *	 "None":
> + *		 Blend formula that ignores the pixel alpha::
> + *
> + *			 out.rgb = plane_alpha * fg.rgb +
> + *				 (1 - plane_alpha) * bg.rgb
> + *
> + *	 "Pre-multiplied":
> + *		 Blend formula that assumes the pixel color values
> + *		 have been already pre-multiplied with the alpha
> + *		 channel values::
> + *
> + *			 out.rgb = plane_alpha * fg.rgb +
> + *				 (1 - (plane_alpha * fg.alpha)) * bg.rgb
> + *
> + *	 "Coverage":
> + *		 Blend formula that assumes the pixel color values have not
> + *		 been pre-multiplied and will do so when blending them to the
> + *		 background color values::
> + *
> + *			 out.rgb = plane_alpha * fg.alpha * fg.rgb +
> + *				 (1 - (plane_alpha * fg.alpha)) * bg.rgb
> + *
> + *	 Using the following symbols:
> + *
> + *	 "fg.rgb":
> + *		 Each of the RGB component values from the plane's pixel
> + *	 "fg.alpha":
> + *		 Alpha component value from the plane's pixel. If the plane's
> + *		 pixel format has no alpha component, then this is assumed to be
> + *		 1.0. In these cases, this property has no effect, as all three
> + *		 equations become equivalent.
> + *	 "bg.rgb":
> + *		 Each of the RGB component values from the background
> + *	 "plane_alpha":
> + *		 Plane alpha value set by the plane "alpha" property. If the
> + *		 plane does not expose the "alpha" property, then this is
> + *		 assumed to be 1.0
> + *
>   * Note that all the property extensions described here apply either to the
>   * plane or the CRTC (e.g. for the background color, which currently is not
>   * exposed and assumed to be black).
> @@ -448,3 +494,80 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
>  	return 0;
>  }
>  EXPORT_SYMBOL(drm_atomic_normalize_zpos);
> +
> +/**
> + * drm_plane_create_blend_mode_property - create a new blend mode property
> + * @plane: drm plane
> + * @supported_modes: bitmask of supported modes, must include
> + *		     BIT(DRM_MODE_BLEND_PREMULTI). Current DRM assumption is
> + *		     that alpha is premultiplied, and old userspace can break if
> + *		     the property defaults to anything else.
> + *
> + * This creates a new property describing the blend mode.
> + *
> + * The property exposed to userspace is an enumeration property (see
> + * drm_property_create_enum()) called "pixel blend mode" and has the
> + * following enumeration values:
> + *
> + * "None":
> + *	Blend formula that ignores the pixel alpha.
> + *
> + * "Pre-multiplied":
> + *	Blend formula that assumes the pixel color values have been already
> + *	pre-multiplied with the alpha channel values.
> + *
> + * "Coverage":
> + *	Blend formula that assumes the pixel color values have not been
> + *	pre-multiplied and will do so when blending them to the background color
> + *	values.
> + *
> + * RETURNS:
> + * Zero for success or -errno
> + */
> +int drm_plane_create_blend_mode_property(struct drm_plane *plane,
> +					 unsigned int supported_modes)
> +{
> +	struct drm_device *dev = plane->dev;
> +	struct drm_property *prop;
> +	static const struct drm_prop_enum_list props[] = {
> +		{ DRM_MODE_BLEND_PIXEL_NONE, "None" },
> +		{ DRM_MODE_BLEND_PREMULTI, "Pre-multiplied" },
> +		{ DRM_MODE_BLEND_COVERAGE, "Coverage" },
> +	};
> +	unsigned int valid_mode_mask = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> +				       BIT(DRM_MODE_BLEND_PREMULTI)   |
> +				       BIT(DRM_MODE_BLEND_COVERAGE);
> +	int i;
> +
> +	if (WARN_ON((supported_modes & ~valid_mode_mask) ||
> +		    ((supported_modes & BIT(DRM_MODE_BLEND_PREMULTI)) == 0)))
> +		return -EINVAL;
> +
> +	prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
> +				   "pixel blend mode",
> +				   hweight32(supported_modes));
> +	if (!prop)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < ARRAY_SIZE(props); i++) {
> +		int ret;
> +
> +		if (!(BIT(props[i].type) & supported_modes))
> +			continue;
> +
> +		ret = drm_property_add_enum(prop, props[i].type,
> +					    props[i].name);
> +
> +		if (ret) {
> +			drm_property_destroy(dev, prop);
> +
> +			return ret;
> +		}
> +	}
> +
> +	drm_object_attach_property(&plane->base, prop, DRM_MODE_BLEND_PREMULTI);
> +	plane->blend_mode_property = prop;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index 330c561..88bdfec 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -27,6 +27,10 @@
>  #include <linux/ctype.h>
>  #include <drm/drm_mode.h>
>  
> +#define DRM_MODE_BLEND_PREMULTI		0
> +#define DRM_MODE_BLEND_COVERAGE		1
> +#define DRM_MODE_BLEND_PIXEL_NONE	2
> +
>  struct drm_device;
>  struct drm_atomic_state;
>  struct drm_plane;
> @@ -52,4 +56,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
>  					     unsigned int zpos);
>  int drm_atomic_normalize_zpos(struct drm_device *dev,
>  			      struct drm_atomic_state *state);
> +int drm_plane_create_blend_mode_property(struct drm_plane *plane,
> +					 unsigned int supported_modes);
>  #endif
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index 8a152dc..35ef64a 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -117,6 +117,7 @@ struct drm_plane_state {
>  	 * details.
>  	 */
>  	u16 alpha;
> +	uint16_t pixel_blend_mode;
>  
>  	/**
>  	 * @rotation:
> @@ -659,6 +660,14 @@ struct drm_plane {
>  	 * drm_plane_create_rotation_property().
>  	 */
>  	struct drm_property *rotation_property;
> +	/**
> +	 * @blend_mode_property:
> +	 * Optional "pixel blend mode" enum property for this plane.
> +	 * Blend mode property represents the alpha blending equation selection,
> +	 * describing how the pixels from the current plane are composited with
> +	 * the background.
> +	 */
> +	struct drm_property *blend_mode_property;
>  
>  	/**
>  	 * @color_encoding_property:
> -- 
> 1.9.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS

[PATCH v5 2/2] drm/mali-dp: Implement plane alpha and pixel blend on malidp

[Lowry Li]

Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.

Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.

Changes since v1:
 - Introduces to use it in the malidp driver, which depends on
   the plane alpha patch
Changes since v2:
 - Refines the comments of drm/mali-dp patchset
Changes since v3:
 - Updates on drm/malidp, hardware limitation check only when
   the format has alpha pixel.
Changes since v4:
 - Rebases on drm-misc-next.

Signed-off-by: Lowry Li <lowry.li@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
---
 drivers/gpu/drm/arm/malidp_planes.c | 75 ++++++++++++++++++++++---------------
 1 file changed, 44 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
index 49c37f6..96ee429 100644
--- a/drivers/gpu/drm/arm/malidp_planes.c
+++ b/drivers/gpu/drm/arm/malidp_planes.c
@@ -36,6 +36,7 @@
 #define   LAYER_COMP_MASK		(0x3 << 12)
 #define   LAYER_COMP_PIXEL		(0x3 << 12)
 #define   LAYER_COMP_PLANE		(0x2 << 12)
+#define   LAYER_PMUL_ENABLE		(0x1 << 14)
 #define   LAYER_ALPHA_OFFSET		(16)
 #define   LAYER_ALPHA_MASK		(0xff)
 #define   LAYER_ALPHA(x)		(((x) & LAYER_ALPHA_MASK) << LAYER_ALPHA_OFFSET)
@@ -180,6 +181,7 @@ static int malidp_de_plane_check(struct drm_plane *plane,
 	struct malidp_plane_state *ms = to_malidp_plane_state(state);
 	bool rotated = state->rotation & MALIDP_ROTATED_MASK;
 	struct drm_framebuffer *fb;
+	u16 pixel_alpha = state->pixel_blend_mode;
 	int i, ret;
 
 	if (!state->crtc || !state->fb)
@@ -242,6 +244,12 @@ static int malidp_de_plane_check(struct drm_plane *plane,
 		ms->rotmem_size = val;
 	}
 
+	/* HW can't support plane + pixel blending */
+	if ((state->alpha != DRM_BLEND_ALPHA_OPAQUE) &&
+	    (pixel_alpha != DRM_MODE_BLEND_PIXEL_NONE) &&
+	    fb->format->has_alpha)
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -323,17 +331,19 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 {
 	struct malidp_plane *mp;
 	struct malidp_plane_state *ms = to_malidp_plane_state(plane->state);
+	struct drm_plane_state *state = plane->state;
+	u16 pixel_alpha = state->pixel_blend_mode;
+	u8 plane_alpha = state->alpha >> 8;
 	u32 src_w, src_h, dest_w, dest_h, val;
 	int i;
-	bool format_has_alpha = plane->state->fb->format->has_alpha;
 
 	mp = to_malidp_plane(plane);
 
 	/* convert src values from Q16 fixed point to integer */
-	src_w = plane->state->src_w >> 16;
-	src_h = plane->state->src_h >> 16;
-	dest_w = plane->state->crtc_w;
-	dest_h = plane->state->crtc_h;
+	src_w = state->src_w >> 16;
+	src_h = state->src_h >> 16;
+	dest_w = state->crtc_w;
+	dest_h = state->crtc_h;
 
 	val = malidp_hw_read(mp->hwdev, mp->layer->base);
 	val = (val & ~LAYER_FORMAT_MASK) | ms->format;
@@ -342,14 +352,14 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	for (i = 0; i < ms->n_planes; i++) {
 		/* calculate the offset for the layer's plane registers */
 		u16 ptr = mp->layer->ptr + (i << 4);
-		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(plane->state->fb,
-							     plane->state, i);
+		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(state->fb,
+							     state, i);
 
 		malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr);
 		malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4);
 	}
 	malidp_de_set_plane_pitches(mp, ms->n_planes,
-				    plane->state->fb->pitches);
+				    state->fb->pitches);
 
 	if ((plane->state->color_encoding != old_state->color_encoding) ||
 	    (plane->state->color_range != old_state->color_range))
@@ -362,8 +372,8 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	malidp_hw_write(mp->hwdev, LAYER_H_VAL(dest_w) | LAYER_V_VAL(dest_h),
 			mp->layer->base + MALIDP_LAYER_COMP_SIZE);
 
-	malidp_hw_write(mp->hwdev, LAYER_H_VAL(plane->state->crtc_x) |
-			LAYER_V_VAL(plane->state->crtc_y),
+	malidp_hw_write(mp->hwdev, LAYER_H_VAL(state->crtc_x) |
+			LAYER_V_VAL(state->crtc_y),
 			mp->layer->base + MALIDP_LAYER_OFFSET);
 
 	if (mp->layer->id == DE_SMART)
@@ -376,38 +386,35 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	val &= ~LAYER_ROT_MASK;
 
 	/* setup the rotation and axis flip bits */
-	if (plane->state->rotation & DRM_MODE_ROTATE_MASK)
+	if (state->rotation & DRM_MODE_ROTATE_MASK)
 		val |= ilog2(plane->state->rotation & DRM_MODE_ROTATE_MASK) <<
 		       LAYER_ROT_OFFSET;
-	if (plane->state->rotation & DRM_MODE_REFLECT_X)
+	if (state->rotation & DRM_MODE_REFLECT_X)
 		val |= LAYER_H_FLIP;
-	if (plane->state->rotation & DRM_MODE_REFLECT_Y)
+	if (state->rotation & DRM_MODE_REFLECT_Y)
 		val |= LAYER_V_FLIP;
 
-	val &= ~LAYER_COMP_MASK;
-	if (format_has_alpha) {
-
-		/*
-		 * always enable pixel alpha blending until we have a way
-		 * to change blend modes
-		 */
-		val |= LAYER_COMP_PIXEL;
-	} else {
+	val &= ~(LAYER_COMP_MASK | LAYER_PMUL_ENABLE | LAYER_ALPHA(0xff));
 
-		/*
-		 * do not enable pixel alpha blending as the color channel
-		 * does not have any alpha information
-		 */
+	if (state->alpha != DRM_BLEND_ALPHA_OPAQUE) {
 		val |= LAYER_COMP_PLANE;
-
-		/* Set layer alpha coefficient to 0xff ie fully opaque */
-		val |= LAYER_ALPHA(0xff);
+	} else if (state->fb->format->has_alpha) {
+		/* We only care about blend mode if the format has alpha */
+		switch (pixel_alpha) {
+		case DRM_MODE_BLEND_PREMULTI:
+			val |= LAYER_COMP_PIXEL | LAYER_PMUL_ENABLE;
+			break;
+		case DRM_MODE_BLEND_COVERAGE:
+			val |= LAYER_COMP_PIXEL;
+			break;
+		}
 	}
+	val |= LAYER_ALPHA(plane_alpha);
 
 	val &= ~LAYER_FLOWCFG(LAYER_FLOWCFG_MASK);
-	if (plane->state->crtc) {
+	if (state->crtc) {
 		struct malidp_crtc_state *m =
-			to_malidp_crtc_state(plane->state->crtc->state);
+			to_malidp_crtc_state(state->crtc->state);
 
 		if (m->scaler_config.scale_enable &&
 		    m->scaler_config.plane_src_id == mp->layer->id)
@@ -446,6 +453,9 @@ int malidp_de_planes_init(struct drm_device *drm)
 	unsigned long crtcs = 1 << drm->mode_config.num_crtc;
 	unsigned long flags = DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 |
 			      DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
+	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+				  BIT(DRM_MODE_BLEND_PREMULTI)   |
+				  BIT(DRM_MODE_BLEND_COVERAGE);
 	u32 *formats;
 	int ret, i, j, n;
 
@@ -498,6 +508,9 @@ int malidp_de_planes_init(struct drm_device *drm)
 		malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,
 				plane->layer->base + MALIDP_LAYER_COMPOSE);
 
+		drm_plane_create_alpha_property(&plane->base);
+		drm_plane_create_blend_mode_property(&plane->base, blend_caps);
+
 		/* Attach the YUV->RGB property only to video layers */
 		if (id & (DE_VIDEO1 | DE_VIDEO2)) {
 			/* default encoding for YUV->RGB is BT601 NARROW */
-- 
1.9.1

[PATCH v5 2/2] drm/mali-dp: Implement plane alpha and pixel blend on malidp

[Lowry Li]

Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.

Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.

Changes since v1:
 - Introduces to use it in the malidp driver, which depends on
   the plane alpha patch
Changes since v2:
 - Refines the comments of drm/mali-dp patchset
Changes since v3:
 - Adds hardware limitation check
Changes since v4:
 - Updates on drm/malidp, hardware limitation check only when
   the format has alpha pixel.
 - Rebases on drm-misc-next.

Signed-off-by: Lowry Li <lowry.li@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
---
 drivers/gpu/drm/arm/malidp_planes.c | 75 ++++++++++++++++++++++---------------
 1 file changed, 44 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
index 49c37f6..96ee429 100644
--- a/drivers/gpu/drm/arm/malidp_planes.c
+++ b/drivers/gpu/drm/arm/malidp_planes.c
@@ -36,6 +36,7 @@
 #define   LAYER_COMP_MASK		(0x3 << 12)
 #define   LAYER_COMP_PIXEL		(0x3 << 12)
 #define   LAYER_COMP_PLANE		(0x2 << 12)
+#define   LAYER_PMUL_ENABLE		(0x1 << 14)
 #define   LAYER_ALPHA_OFFSET		(16)
 #define   LAYER_ALPHA_MASK		(0xff)
 #define   LAYER_ALPHA(x)		(((x) & LAYER_ALPHA_MASK) << LAYER_ALPHA_OFFSET)
@@ -180,6 +181,7 @@ static int malidp_de_plane_check(struct drm_plane *plane,
 	struct malidp_plane_state *ms = to_malidp_plane_state(state);
 	bool rotated = state->rotation & MALIDP_ROTATED_MASK;
 	struct drm_framebuffer *fb;
+	u16 pixel_alpha = state->pixel_blend_mode;
 	int i, ret;
 
 	if (!state->crtc || !state->fb)
@@ -242,6 +244,12 @@ static int malidp_de_plane_check(struct drm_plane *plane,
 		ms->rotmem_size = val;
 	}
 
+	/* HW can't support plane + pixel blending */
+	if ((state->alpha != DRM_BLEND_ALPHA_OPAQUE) &&
+	    (pixel_alpha != DRM_MODE_BLEND_PIXEL_NONE) &&
+	    fb->format->has_alpha)
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -323,17 +331,19 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 {
 	struct malidp_plane *mp;
 	struct malidp_plane_state *ms = to_malidp_plane_state(plane->state);
+	struct drm_plane_state *state = plane->state;
+	u16 pixel_alpha = state->pixel_blend_mode;
+	u8 plane_alpha = state->alpha >> 8;
 	u32 src_w, src_h, dest_w, dest_h, val;
 	int i;
-	bool format_has_alpha = plane->state->fb->format->has_alpha;
 
 	mp = to_malidp_plane(plane);
 
 	/* convert src values from Q16 fixed point to integer */
-	src_w = plane->state->src_w >> 16;
-	src_h = plane->state->src_h >> 16;
-	dest_w = plane->state->crtc_w;
-	dest_h = plane->state->crtc_h;
+	src_w = state->src_w >> 16;
+	src_h = state->src_h >> 16;
+	dest_w = state->crtc_w;
+	dest_h = state->crtc_h;
 
 	val = malidp_hw_read(mp->hwdev, mp->layer->base);
 	val = (val & ~LAYER_FORMAT_MASK) | ms->format;
@@ -342,14 +352,14 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	for (i = 0; i < ms->n_planes; i++) {
 		/* calculate the offset for the layer's plane registers */
 		u16 ptr = mp->layer->ptr + (i << 4);
-		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(plane->state->fb,
-							     plane->state, i);
+		dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(state->fb,
+							     state, i);
 
 		malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr);
 		malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4);
 	}
 	malidp_de_set_plane_pitches(mp, ms->n_planes,
-				    plane->state->fb->pitches);
+				    state->fb->pitches);
 
 	if ((plane->state->color_encoding != old_state->color_encoding) ||
 	    (plane->state->color_range != old_state->color_range))
@@ -362,8 +372,8 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	malidp_hw_write(mp->hwdev, LAYER_H_VAL(dest_w) | LAYER_V_VAL(dest_h),
 			mp->layer->base + MALIDP_LAYER_COMP_SIZE);
 
-	malidp_hw_write(mp->hwdev, LAYER_H_VAL(plane->state->crtc_x) |
-			LAYER_V_VAL(plane->state->crtc_y),
+	malidp_hw_write(mp->hwdev, LAYER_H_VAL(state->crtc_x) |
+			LAYER_V_VAL(state->crtc_y),
 			mp->layer->base + MALIDP_LAYER_OFFSET);
 
 	if (mp->layer->id == DE_SMART)
@@ -376,38 +386,35 @@ static void malidp_de_plane_update(struct drm_plane *plane,
 	val &= ~LAYER_ROT_MASK;
 
 	/* setup the rotation and axis flip bits */
-	if (plane->state->rotation & DRM_MODE_ROTATE_MASK)
+	if (state->rotation & DRM_MODE_ROTATE_MASK)
 		val |= ilog2(plane->state->rotation & DRM_MODE_ROTATE_MASK) <<
 		       LAYER_ROT_OFFSET;
-	if (plane->state->rotation & DRM_MODE_REFLECT_X)
+	if (state->rotation & DRM_MODE_REFLECT_X)
 		val |= LAYER_H_FLIP;
-	if (plane->state->rotation & DRM_MODE_REFLECT_Y)
+	if (state->rotation & DRM_MODE_REFLECT_Y)
 		val |= LAYER_V_FLIP;
 
-	val &= ~LAYER_COMP_MASK;
-	if (format_has_alpha) {
-
-		/*
-		 * always enable pixel alpha blending until we have a way
-		 * to change blend modes
-		 */
-		val |= LAYER_COMP_PIXEL;
-	} else {
+	val &= ~(LAYER_COMP_MASK | LAYER_PMUL_ENABLE | LAYER_ALPHA(0xff));
 
-		/*
-		 * do not enable pixel alpha blending as the color channel
-		 * does not have any alpha information
-		 */
+	if (state->alpha != DRM_BLEND_ALPHA_OPAQUE) {
 		val |= LAYER_COMP_PLANE;
-
-		/* Set layer alpha coefficient to 0xff ie fully opaque */
-		val |= LAYER_ALPHA(0xff);
+	} else if (state->fb->format->has_alpha) {
+		/* We only care about blend mode if the format has alpha */
+		switch (pixel_alpha) {
+		case DRM_MODE_BLEND_PREMULTI:
+			val |= LAYER_COMP_PIXEL | LAYER_PMUL_ENABLE;
+			break;
+		case DRM_MODE_BLEND_COVERAGE:
+			val |= LAYER_COMP_PIXEL;
+			break;
+		}
 	}
+	val |= LAYER_ALPHA(plane_alpha);
 
 	val &= ~LAYER_FLOWCFG(LAYER_FLOWCFG_MASK);
-	if (plane->state->crtc) {
+	if (state->crtc) {
 		struct malidp_crtc_state *m =
-			to_malidp_crtc_state(plane->state->crtc->state);
+			to_malidp_crtc_state(state->crtc->state);
 
 		if (m->scaler_config.scale_enable &&
 		    m->scaler_config.plane_src_id == mp->layer->id)
@@ -446,6 +453,9 @@ int malidp_de_planes_init(struct drm_device *drm)
 	unsigned long crtcs = 1 << drm->mode_config.num_crtc;
 	unsigned long flags = DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_180 |
 			      DRM_MODE_ROTATE_270 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
+	unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+				  BIT(DRM_MODE_BLEND_PREMULTI)   |
+				  BIT(DRM_MODE_BLEND_COVERAGE);
 	u32 *formats;
 	int ret, i, j, n;
 
@@ -498,6 +508,9 @@ int malidp_de_planes_init(struct drm_device *drm)
 		malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,
 				plane->layer->base + MALIDP_LAYER_COMPOSE);
 
+		drm_plane_create_alpha_property(&plane->base);
+		drm_plane_create_blend_mode_property(&plane->base, blend_caps);
+
 		/* Attach the YUV->RGB property only to video layers */
 		if (id & (DE_VIDEO1 | DE_VIDEO2)) {
 			/* default encoding for YUV->RGB is BT601 NARROW */
-- 
1.9.1