[PATCH AUTOSEL 4.4 01/47] misc: mic: SCIF Fix scif_get_new_port() error handling

[PATCH AUTOSEL 4.4 01/47] misc: mic: SCIF Fix scif_get_new_port() error handling

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ]

There are only 2 callers of scif_get_new_port() and both appear to get
the error handling wrong.  Both treat zero returns as error, but it
actually returns negative error codes and >= 0 on success.

Fixes: e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/misc/mic/scif/scif_api.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/mic/scif/scif_api.c b/drivers/misc/mic/scif/scif_api.c
index ddc9e4b08b5c..56efa9d18a9a 100644
--- a/drivers/misc/mic/scif/scif_api.c
+++ b/drivers/misc/mic/scif/scif_api.c
@@ -370,11 +370,10 @@ int scif_bind(scif_epd_t epd, u16 pn)
 			goto scif_bind_exit;
 		}
 	} else {
-		pn = scif_get_new_port();
-		if (!pn) {
-			ret = -ENOSPC;
+		ret = scif_get_new_port();
+		if (ret < 0)
 			goto scif_bind_exit;
-		}
+		pn = ret;
 	}
 
 	ep->state = SCIFEP_BOUND;
@@ -648,13 +647,12 @@ int __scif_connect(scif_epd_t epd, struct scif_port_id *dst, bool non_block)
 			err = -EISCONN;
 		break;
 	case SCIFEP_UNBOUND:
-		ep->port.port = scif_get_new_port();
-		if (!ep->port.port) {
-			err = -ENOSPC;
-		} else {
-			ep->port.node = scif_info.nodeid;
-			ep->conn_async_state = ASYNC_CONN_IDLE;
-		}
+		err = scif_get_new_port();
+		if (err < 0)
+			break;
+		ep->port.port = err;
+		ep->port.node = scif_info.nodeid;
+		ep->conn_async_state = ASYNC_CONN_IDLE;
 		/* Fall through */
 	case SCIFEP_BOUND:
 		/*
-- 
2.17.1

[PATCH AUTOSEL 4.4 02/47] ethtool: Remove trailing semicolon for static inline

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit d89d41556141a527030a15233135ba622ba3350d ]

Android's header sanitization tool chokes on static inline functions having a
trailing semicolon, leading to an incorrectly parsed header file. While the
tool should obviously be fixed, also fix the header files for the two affected
functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf().

Fixes: 8cf6f497de40 ("ethtool: Add helper routines to pass vf to rx_flow_spec")
Reporetd-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/uapi/linux/ethtool.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index cd1629170103..08f47e0e9f8d 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -819,13 +819,13 @@ struct ethtool_rx_flow_spec {
 static inline __u64 ethtool_get_flow_spec_ring(__u64 ring_cookie)
 {
 	return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie;
-};
+}
 
 static inline __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie)
 {
 	return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >>
 				ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
-};
+}
 
 /**
  * struct ethtool_rxnfc - command to get or set RX flow classification rules
-- 
2.17.1

[PATCH AUTOSEL 4.4 03/47] Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV

[Sasha Levin]

From: Johan Hedberg <johan.hedberg@intel.com>

[ Upstream commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df ]

This driver was recently updated to use serdev, so add the appropriate
dependency. Without this one can get compiler warnings like this if
CONFIG_SERIAL_DEV_BUS is not enabled:

  CC [M]  drivers/bluetooth/hci_h5.o
drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable]
 static struct serdev_device_driver h5_serdev_driver = {
                                    ^~~~~~~~~~~~~~~~

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/bluetooth/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index ec6af1595062..4685bd10c473 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -125,6 +125,7 @@ config BT_HCIUART_LL
 config BT_HCIUART_3WIRE
 	bool "Three-wire UART (H5) protocol support"
 	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
 	help
 	  The HCI Three-wire UART Transport Layer makes it possible to
 	  user the Bluetooth HCI over a serial port interface. The HCI
-- 
2.17.1

[PATCH AUTOSEL 4.4 04/47] gpio: tegra: Move driver registration to subsys_init level

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 40b25bce0adbe641a744d1291bc0e51fb7f3c3d8 ]

There is a bug in regards to deferred probing within the drivers core
that causes GPIO-driver to suspend after its users. The bug appears if
GPIO-driver probe is getting deferred, which happens after introducing
dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges"
property in device-tree. The bug in the drivers core is old (more than 4
years now) and is well known, unfortunately there is no easy fix for it.
The good news is that we can workaround the deferred probe issue by
changing GPIO / PINCTRL drivers registration order and hence by moving
PINCTRL driver registration to the arch_init level and GPIO to the
subsys_init.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpio/gpio-tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 896bf29776b0..fb2c1df4f588 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -591,4 +591,4 @@ static int __init tegra_gpio_init(void)
 {
 	return platform_driver_register(&tegra_gpio_driver);
 }
-postcore_initcall(tegra_gpio_init);
+subsys_initcall(tegra_gpio_init);
-- 
2.17.1

[PATCH AUTOSEL 4.4 05/47] scsi: target: fix __transport_register_session locking

[Sasha Levin]

From: Mike Christie <mchristi@redhat.com>

[ Upstream commit 6a64f6e1591322beb8ce16e952a53582caf2a15c ]

When __transport_register_session is called from transport_register_session
irqs will already have been disabled, so we do not want the unlock irq call
to enable them until the higher level has done the final
spin_unlock_irqrestore/ spin_unlock_irq.

This has __transport_register_session use the save/restore call.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/target/target_core_transport.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 21f888ac550e..7199bac67333 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -306,6 +306,7 @@ void __transport_register_session(
 {
 	const struct target_core_fabric_ops *tfo = se_tpg->se_tpg_tfo;
 	unsigned char buf[PR_REG_ISID_LEN];
+	unsigned long flags;
 
 	se_sess->se_tpg = se_tpg;
 	se_sess->fabric_sess_ptr = fabric_sess_ptr;
@@ -342,7 +343,7 @@ void __transport_register_session(
 			se_sess->sess_bin_isid = get_unaligned_be64(&buf[0]);
 		}
 
-		spin_lock_irq(&se_nacl->nacl_sess_lock);
+		spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags);
 		/*
 		 * The se_nacl->nacl_sess pointer will be set to the
 		 * last active I_T Nexus for each struct se_node_acl.
@@ -351,7 +352,7 @@ void __transport_register_session(
 
 		list_add_tail(&se_sess->sess_acl_list,
 			      &se_nacl->acl_sess_list);
-		spin_unlock_irq(&se_nacl->nacl_sess_lock);
+		spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
 	}
 	list_add_tail(&se_sess->sess_list, &se_tpg->tpg_sess_list);
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 06/47] media: usbtv: use irqsave() in USB's complete callback

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 320905baa1dbddd3991c287432176d536e1d5b79 ]

The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/usb/usbtv/usbtv-audio.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/usbtv/usbtv-audio.c b/drivers/media/usb/usbtv/usbtv-audio.c
index 5dab02432e82..ec1b9a1432b1 100644
--- a/drivers/media/usb/usbtv/usbtv-audio.c
+++ b/drivers/media/usb/usbtv/usbtv-audio.c
@@ -112,6 +112,7 @@ static void usbtv_audio_urb_received(struct urb *urb)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	size_t i, frame_bytes, chunk_length, buffer_pos, period_pos;
 	int period_elapsed;
+	unsigned long flags;
 	void *urb_current;
 
 	switch (urb->status) {
@@ -165,12 +166,12 @@ static void usbtv_audio_urb_received(struct urb *urb)
 		}
 	}
 
-	snd_pcm_stream_lock(substream);
+	snd_pcm_stream_lock_irqsave(substream, flags);
 
 	chip->snd_buffer_pos = buffer_pos;
 	chip->snd_period_pos = period_pos;
 
-	snd_pcm_stream_unlock(substream);
+	snd_pcm_stream_unlock_irqrestore(substream, flags);
 
 	if (period_elapsed)
 		snd_pcm_period_elapsed(substream);
-- 
2.17.1

[PATCH AUTOSEL 4.4 07/47] md/raid5: fix data corruption of replacements after originals dropped

[Sasha Levin]

From: BingJing Chang <bingjingc@synology.com>

[ Upstream commit d63e2fc804c46e50eee825c5d3a7228e07048b47 ]

During raid5 replacement, the stripes can be marked with R5_NeedReplace
flag. Data can be read from being-replaced devices and written to
replacing spares without reading all other devices. (It's 'replace'
mode. s.replacing = 1) If a being-replaced device is dropped, the
replacement progress will be interrupted and resumed with pure recovery
mode. However, existing stripes before being interrupted cannot read
from the dropped device anymore. It prints lots of WARN_ON messages.
And it results in data corruption because existing stripes write
problematic data into its replacement device and update the progress.

\# Erase disks (1MB + 2GB)
dd if=/dev/zero of=/dev/sda bs=1MB count=2049
dd if=/dev/zero of=/dev/sdb bs=1MB count=2049
dd if=/dev/zero of=/dev/sdc bs=1MB count=2049
dd if=/dev/zero of=/dev/sdd bs=1MB count=2049
mdadm -C /dev/md0 -amd -R -l5 -n3 -x0 /dev/sd[abc] -z 2097152
\# Ensure array stores non-zero data
dd if=/root/data_4GB.iso of=/dev/md0 bs=1MB
\# Start replacement
mdadm /dev/md0 -a /dev/sdd
mdadm /dev/md0 --replace /dev/sda

Then, Hot-plug out /dev/sda during recovery, and wait for recovery done.
echo check > /sys/block/md0/md/sync_action
cat /sys/block/md0/md/mismatch_cnt # it will be greater than 0.

Soon after you hot-plug out /dev/sda, you will see many WARN_ON
messages. The replacement recovery will be interrupted shortly. After
the recovery finishes, it will result in data corruption.

Actually, it's just an unhandled case of replacement. In commit
<f94c0b6658c7> (md/raid5: fix interaction of 'replace' and 'recovery'.),
if a NeedReplace device is not UPTODATE then that is an error, the
commit just simply print WARN_ON but also mark these corrupted stripes
with R5_WantReplace. (it means it's ready for writes.)

To fix this case, we can leverage 'sync and replace' mode mentioned in
commit <9a3e1101b827> (md/raid5: detect and handle replacements during
recovery.). We can add logics to detect and use 'sync and replace' mode
for these stripes.

Reported-by: Alex Chen <alexchen@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid5.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d59b861764a1..0841d8f10a58 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4190,6 +4190,12 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			s->failed++;
 			if (rdev && !test_bit(Faulty, &rdev->flags))
 				do_recovery = 1;
+			else if (!rdev) {
+				rdev = rcu_dereference(
+				    conf->disks[i].replacement);
+				if (rdev && !test_bit(Faulty, &rdev->flags))
+					do_recovery = 1;
+			}
 		}
 	}
 	if (test_bit(STRIPE_SYNCING, &sh->state)) {
-- 
2.17.1

[PATCH AUTOSEL 4.4 08/47] misc: ti-st: Fix memory leak in the error path of probe()

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 81ae962d7f180c0092859440c82996cccb254976 ]

Free resources instead of direct return of the error code if kim_probe
fails.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/misc/ti-st/st_kim.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 71b64550b591..a1bca836e506 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -757,14 +757,14 @@ static int kim_probe(struct platform_device *pdev)
 	err = gpio_request(kim_gdata->nshutdown, "kim");
 	if (unlikely(err)) {
 		pr_err(" gpio %d request failed ", kim_gdata->nshutdown);
-		return err;
+		goto err_sysfs_group;
 	}
 
 	/* Configure nShutdown GPIO as output=0 */
 	err = gpio_direction_output(kim_gdata->nshutdown, 0);
 	if (unlikely(err)) {
 		pr_err(" unable to configure gpio %d", kim_gdata->nshutdown);
-		return err;
+		goto err_sysfs_group;
 	}
 	/* get reference of pdev for request_firmware
 	 */
-- 
2.17.1

[PATCH AUTOSEL 4.4 09/47] uio: potential double frees if __uio_register_device() fails

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f019f07ecf6a6b8bd6d7853bce70925d90af02d1 ]

The uio_unregister_device() function assumes that if "info->uio_dev" is
non-NULL that means "info" is fully allocated.  Setting info->uio_de
has to be the last thing in the function.

In the current code, if request_threaded_irq() fails then we return with
info->uio_dev set to non-NULL but info is not fully allocated and it can
lead to double frees.

Fixes: beafc54c4e2f ("UIO: Add the User IO core code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/uio/uio.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index bcc1fc027311..b9823eb9c195 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -833,8 +833,6 @@ int __uio_register_device(struct module *owner,
 	if (ret)
 		goto err_uio_dev_add_attributes;
 
-	info->uio_dev = idev;
-
 	if (info->irq && (info->irq != UIO_IRQ_CUSTOM)) {
 		/*
 		 * Note that we deliberately don't use devm_request_irq
@@ -850,6 +848,7 @@ int __uio_register_device(struct module *owner,
 			goto err_request_irq;
 	}
 
+	info->uio_dev = idev;
 	return 0;
 
 err_request_irq:
-- 
2.17.1

[PATCH AUTOSEL 4.4 10/47] tty: rocket: Fix possible buffer overwrite on register_PCI

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 0419056ec8fd01ddf5460d2dba0491aad22657dd ]

If number of isa and pci boards exceed NUM_BOARDS on the path
rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs
in register_PCI() on assign rcktpt_io_addr[i].

The patch adds check on upper bound for index of registered
board in register_PCI.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/rocket.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 802eac7e561b..2b8f2e0a4224 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1915,7 +1915,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
 	ByteIO_t UPCIRingInd = 0;
 
 	if (!dev || !pci_match_id(rocket_pci_ids, dev) ||
-	    pci_enable_device(dev))
+	    pci_enable_device(dev) || i >= NUM_BOARDS)
 		return 0;
 
 	rcktpt_io_addr[i] = pci_resource_start(dev, 0);
-- 
2.17.1

[PATCH AUTOSEL 4.4 11/47] f2fs: do not set free of current section

[Sasha Levin]

From: Yunlong Song <yunlong.song@huawei.com>

[ Upstream commit 3611ce9911267cb93d364bd71ddea6821278d11f ]

For the case when sbi->segs_per_sec > 1, take section:segment = 5 for
example, if segment 1 is just used and allocate new segment 2, and the
blocks of segment 1 is invalidated, at this time, the previous code will
use __set_test_and_free to free the free_secmap and free_sections++,
this is not correct since it is still a current section, so fix it.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/f2fs/segment.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index ee44d346ea44..bfa1d31f79aa 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -381,6 +381,8 @@ static inline void __set_test_and_free(struct f2fs_sb_info *sbi,
 	if (test_and_clear_bit(segno, free_i->free_segmap)) {
 		free_i->free_segments++;
 
+		if (IS_CURSEC(sbi, secno))
+			goto skip_free;
 		next = find_next_bit(free_i->free_segmap,
 				start_segno + sbi->segs_per_sec, start_segno);
 		if (next >= start_segno + sbi->segs_per_sec) {
@@ -388,6 +390,7 @@ static inline void __set_test_and_free(struct f2fs_sb_info *sbi,
 				free_i->free_sections++;
 		}
 	}
+skip_free:
 	spin_unlock(&free_i->segmap_lock);
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 12/47] perf tools: Allow overriding MAX_NR_CPUS at compile time

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 21b8732eb4479b579bda9ee38e62b2c312c2a0e5 ]

After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:

  ~# strace perf
  execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory)
  --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
  +++ killed by SIGSEGV +++
  Segmentation fault

objdump -x shows that .bss section has a huge size of 24Mbytes:

 27 .bss          016baca8  101cebb8  101cebb8  001cd988  2**3

With especially the following objects having quite big size:

  10205f80 l     O .bss	00140000     runtime_cycles_stats
  10345f80 l     O .bss	00140000     runtime_stalled_cycles_front_stats
  10485f80 l     O .bss	00140000     runtime_stalled_cycles_back_stats
  105c5f80 l     O .bss	00140000     runtime_branches_stats
  10705f80 l     O .bss	00140000     runtime_cacherefs_stats
  10845f80 l     O .bss	00140000     runtime_l1_dcache_stats
  10985f80 l     O .bss	00140000     runtime_l1_icache_stats
  10ac5f80 l     O .bss	00140000     runtime_ll_cache_stats
  10c05f80 l     O .bss	00140000     runtime_itlb_cache_stats
  10d45f80 l     O .bss	00140000     runtime_dtlb_cache_stats
  10e85f80 l     O .bss	00140000     runtime_cycles_in_tx_stats
  10fc5f80 l     O .bss	00140000     runtime_transaction_stats
  11105f80 l     O .bss	00140000     runtime_elision_stats
  11245f80 l     O .bss	00140000     runtime_topdown_total_slots
  11385f80 l     O .bss	00140000     runtime_topdown_slots_retired
  114c5f80 l     O .bss	00140000     runtime_topdown_slots_issued
  11605f80 l     O .bss	00140000     runtime_topdown_fetch_bubbles
  11745f80 l     O .bss	00140000     runtime_topdown_recovery_bubbles

This is due to commit 4d255766d28b1 ("perf: Bump max number of cpus
to 1024"), because many tables are sized with MAX_NR_CPUS

This patch gives the opportunity to redefine MAX_NR_CPUS via

  $ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/perf.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 90129accffbe..4341ed267d4e 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -29,7 +29,9 @@ static inline unsigned long long rdclock(void)
 	return ts.tv_sec * 1000000000ULL + ts.tv_nsec;
 }
 
+#ifndef MAX_NR_CPUS
 #define MAX_NR_CPUS			1024
+#endif
 
 extern const char *input_name;
 extern bool perf_host, perf_guest;
-- 
2.17.1

[PATCH AUTOSEL 4.4 13/47] NFSv4.0 fix client reference leak in callback

[Sasha Levin]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 32cd3ee511f4e07ca25d71163b50e704808d22f4 ]

If there is an error during processing of a callback message, it leads
to refrence leak on the client structure and eventually an unclean
superblock.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfs/callback_xdr.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index e2e857affbf2..0647cb1ede56 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -911,16 +911,21 @@ static __be32 nfs4_callback_compound(struct svc_rqst *rqstp, void *argp, void *r
 
 	if (hdr_arg.minorversion == 0) {
 		cps.clp = nfs4_find_client_ident(SVC_NET(rqstp), hdr_arg.cb_ident);
-		if (!cps.clp || !check_gss_callback_principal(cps.clp, rqstp))
+		if (!cps.clp || !check_gss_callback_principal(cps.clp, rqstp)) {
+			if (cps.clp)
+				nfs_put_client(cps.clp);
 			goto out_invalidcred;
+		}
 	}
 
 	cps.minorversion = hdr_arg.minorversion;
 	hdr_res.taglen = hdr_arg.taglen;
 	hdr_res.tag = hdr_arg.tag;
-	if (encode_compound_hdr_res(&xdr_out, &hdr_res) != 0)
+	if (encode_compound_hdr_res(&xdr_out, &hdr_res) != 0) {
+		if (cps.clp)
+			nfs_put_client(cps.clp);
 		return rpc_system_err;
-
+	}
 	while (status == 0 && nops != hdr_arg.nops) {
 		status = process_op(nops, rqstp, &xdr_in,
 				    argp, &xdr_out, resp, &cps);
-- 
2.17.1

[PATCH AUTOSEL 4.4 14/47] macintosh/via-pmu: Add missing mmio accessors

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 576d5290d678a651b9f36050fc1717e0573aca13 ]

Add missing in_8() accessors to init_pmu() and pmu_sr_intr().

This fixes several sparse warnings:
drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression
drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression
drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression
drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/macintosh/via-pmu.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f9512bfa6c3c..0a41132ffba7 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -530,8 +530,9 @@ init_pmu(void)
 	int timeout;
 	struct adb_request req;
 
-	out_8(&via[B], via[B] | TREQ);			/* negate TREQ */
-	out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK);	/* TACK in, TREQ out */
+	/* Negate TREQ. Set TACK to input and TREQ to output. */
+	out_8(&via[B], in_8(&via[B]) | TREQ);
+	out_8(&via[DIRB], (in_8(&via[DIRB]) | TREQ) & ~TACK);
 
 	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
 	timeout =  100000;
@@ -1453,8 +1454,8 @@ pmu_sr_intr(void)
 	struct adb_request *req;
 	int bite = 0;
 
-	if (via[B] & TREQ) {
-		printk(KERN_ERR "PMU: spurious SR intr (%x)\n", via[B]);
+	if (in_8(&via[B]) & TREQ) {
+		printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via[B]));
 		out_8(&via[IFR], SR_INT);
 		return NULL;
 	}
-- 
2.17.1

[PATCH AUTOSEL 4.4 15/47] ath10k: prevent active scans on potential unusable channels

[Sasha Levin]

From: Sven Eckelmann <sven.eckelmann@openmesh.com>

[ Upstream commit 3f259111583801013cb605bb4414aa529adccf1c ]

The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most
likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the
scan. This results in transmission (probe requests) on channels which are
not "available" for transmissions.

Since the firmware is closed source and nothing can be done from our side
to fix the problem in it, the driver has to work around this problem. The
WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not
scan actively on a channel unless an AP was detected on it. Simple probe
requests will then be transmitted by the STA on the channel.

ath10k must therefore also use this flag when it queues a radar channel for
scanning. This should reduce the chance of an active scan when the channel
might be "unusable" for transmissions.

Fixes: e8a50f8ba44b ("ath10k: introduce DFS implementation")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 916b9b12edd2..4644357d291a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2901,6 +2901,13 @@ static int ath10k_update_channel_list(struct ath10k *ar)
 			passive = channel->flags & IEEE80211_CHAN_NO_IR;
 			ch->passive = passive;
 
+			/* the firmware is ignoring the "radar" flag of the
+			 * channel and is scanning actively using Probe Requests
+			 * on "Radar detection"/DFS channels which are not
+			 * marked as "available"
+			 */
+			ch->passive |= ch->chan_radar;
+
 			ch->freq = channel->center_freq;
 			ch->band_center_freq1 = channel->center_freq;
 			ch->min_power = 0;
-- 
2.17.1

[PATCH AUTOSEL 4.4 16/47] wlcore: Set rx_status boottime_ns field on rx

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 37a634f60fd6dfbda2c312657eec7ef0750546e7 ]

When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)

This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ti/wlcore/rx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/rx.c b/drivers/net/wireless/ti/wlcore/rx.c
index 5b2927391d1c..e9e449ec68d2 100644
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -59,7 +59,7 @@ static u32 wlcore_rx_get_align_buf_size(struct wl1271 *wl, u32 pkt_len)
 static void wl1271_rx_status(struct wl1271 *wl,
 			     struct wl1271_rx_descriptor *desc,
 			     struct ieee80211_rx_status *status,
-			     u8 beacon)
+			     u8 beacon, u8 probe_rsp)
 {
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
@@ -106,6 +106,9 @@ static void wl1271_rx_status(struct wl1271 *wl,
 		}
 	}
 
+	if (beacon || probe_rsp)
+		status->boottime_ns = ktime_get_boot_ns();
+
 	if (beacon)
 		wlcore_set_pending_regdomain_ch(wl, (u16)desc->channel,
 						status->band);
@@ -195,7 +198,8 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	if (ieee80211_is_data_present(hdr->frame_control))
 		is_data = 1;
 
-	wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
+	wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon,
+			 ieee80211_is_probe_resp(hdr->frame_control));
 	wlcore_hw_set_rx_csum(wl, desc, skb);
 
 	seq_num = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
-- 
2.17.1

[PATCH AUTOSEL 4.4 17/47] MIPS: Fix ISA virt/bus conversion for non-zero PHYS_OFFSET

[Sasha Levin]

From: Paul Burton <paul.burton@mips.com>

[ Upstream commit 0494d7ffdcebc6935410ea0719b24ab626675351 ]

isa_virt_to_bus() & isa_bus_to_virt() claim to treat ISA bus addresses
as being identical to physical addresses, but they fail to do so in the
presence of a non-zero PHYS_OFFSET.

Correct this by having them use virt_to_phys() & phys_to_virt(), which
consolidates the calculations to one place & ensures that ISA bus
addresses do indeed match physical addresses.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20047/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/include/asm/io.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 75fa296836fc..ab1df19b0957 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -141,14 +141,14 @@ static inline void * phys_to_virt(unsigned long address)
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */
-static inline unsigned long isa_virt_to_bus(volatile void * address)
+static inline unsigned long isa_virt_to_bus(volatile void *address)
 {
-	return (unsigned long)address - PAGE_OFFSET;
+	return virt_to_phys(address);
 }
 
-static inline void * isa_bus_to_virt(unsigned long address)
+static inline void *isa_bus_to_virt(unsigned long address)
 {
-	return (void *)(address + PAGE_OFFSET);
+	return phys_to_virt(address);
 }
 
 #define isa_page_to_bus page_to_phys
-- 
2.17.1

[PATCH AUTOSEL 4.4 18/47] ata: libahci: Correct setting of DEVSLP register

[Sasha Levin]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit 2dbb3ec29a6c069035857a2fc4c24e80e5dfe3cc ]

We have seen that on some platforms, SATA device never show any DEVSLP
residency. This prevent power gating of SATA IP, which prevent system
to transition to low power mode in systems with SLP_S0 aka modern
standby systems. The PHY logic is off only in DEVSLP not in slumber.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/datasheets
/332995-skylake-i-o-platform-datasheet-volume-1.pdf
Section 28.7.6.1

Here driver is trying to do read-modify-write the devslp register. But
not resetting the bits for which this driver will modify values (DITO,
MDAT and DETO). So simply reset those bits before updating to new values.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/ata/libahci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 9628fa131757..8116cb2fef2d 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2113,6 +2113,8 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
 		deto = 20;
 	}
 
+	/* Make dito, mdat, deto bits to 0s */
+	devslp &= ~GENMASK_ULL(24, 2);
 	devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) |
 		   (mdat << PORT_DEVSLP_MDAT_OFFSET) |
 		   (deto << PORT_DEVSLP_DETO_OFFSET) |
-- 
2.17.1

[PATCH AUTOSEL 4.4 19/47] scsi: 3ware: fix return 0 on the error path of probe

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 4dc98c1995482262e70e83ef029135247fafe0f2 ]

tw_probe() returns 0 in case of fail of tw_initialize_device_extension(),
pci_resource_start() or tw_reset_sequence() and releases resources.
twl_probe() returns 0 in case of fail of twl_initialize_device_extension(),
pci_iomap() and twl_reset_sequence().  twa_probe() returns 0 in case of
fail of tw_initialize_device_extension(), ioremap() and
twa_reset_sequence().

The patch adds retval initialization for these cases.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/3w-9xxx.c | 6 +++++-
 drivers/scsi/3w-sas.c  | 3 +++
 drivers/scsi/3w-xxxx.c | 2 ++
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 5466246c69b4..b78a2f3745f2 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2045,6 +2045,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 
 	if (twa_initialize_device_extension(tw_dev)) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x25, "Failed to initialize device extension");
+		retval = -ENOMEM;
 		goto out_free_device_extension;
 	}
 
@@ -2067,6 +2068,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	tw_dev->base_addr = ioremap(mem_addr, mem_len);
 	if (!tw_dev->base_addr) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap");
+		retval = -ENOMEM;
 		goto out_release_mem_region;
 	}
 
@@ -2074,8 +2076,10 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	TW_DISABLE_INTERRUPTS(tw_dev);
 
 	/* Initialize the card */
-	if (twa_reset_sequence(tw_dev, 0))
+	if (twa_reset_sequence(tw_dev, 0)) {
+		retval = -ENOMEM;
 		goto out_iounmap;
+	}
 
 	/* Set host specific parameters */
 	if ((pdev->device == PCI_DEVICE_ID_3WARE_9650SE) ||
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index f8374850f714..f0a5536a9ff5 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1600,6 +1600,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 
 	if (twl_initialize_device_extension(tw_dev)) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
+		retval = -ENOMEM;
 		goto out_free_device_extension;
 	}
 
@@ -1614,6 +1615,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	tw_dev->base_addr = pci_iomap(pdev, 1, 0);
 	if (!tw_dev->base_addr) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
+		retval = -ENOMEM;
 		goto out_release_mem_region;
 	}
 
@@ -1623,6 +1625,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	/* Initialize the card */
 	if (twl_reset_sequence(tw_dev, 0)) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
+		retval = -ENOMEM;
 		goto out_iounmap;
 	}
 
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 14af38036287..308a4206b636 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -2278,6 +2278,7 @@ static int tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 
 	if (tw_initialize_device_extension(tw_dev)) {
 		printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension.");
+		retval = -ENOMEM;
 		goto out_free_device_extension;
 	}
 
@@ -2292,6 +2293,7 @@ static int tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	tw_dev->base_addr = pci_resource_start(pdev, 0);
 	if (!tw_dev->base_addr) {
 		printk(KERN_WARNING "3w-xxxx: Failed to get io address.");
+		retval = -ENOMEM;
 		goto out_release_mem_region;
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 20/47] ath10k: disable bundle mgmt tx completion event support

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ]

The tx completion of multiple mgmt frames can be bundled
in a single event and sent by the firmware to host, if this
capability is not disabled explicitly by the host. If the host
cannot handle the bundled mgmt tx completion, this capability
support needs to be disabled in the wmi init cmd, sent to the firmware.

Add the host capability indication flag in the wmi ready command,
to let firmware know the features supported by the host driver.
This field is ignored if it is not supported by firmware.

Set the host capability indication flag(i.e. host_capab) to zero,
for disabling the support of bundle mgmt tx completion. This will
indicate the firmware to send completion event for every mgmt tx
completion, instead of bundling them together and sending in a single
event.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 5 +++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 02eea3c3b5d3..c72eb4464de9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1424,6 +1424,11 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
 	cfg->keep_alive_pattern_size = __cpu_to_le32(0);
 	cfg->max_tdls_concurrent_sleep_sta = __cpu_to_le32(1);
 	cfg->max_tdls_concurrent_buffer_sta = __cpu_to_le32(1);
+	cfg->wmi_send_separate = __cpu_to_le32(0);
+	cfg->num_ocb_vdevs = __cpu_to_le32(0);
+	cfg->num_ocb_channels = __cpu_to_le32(0);
+	cfg->num_ocb_schedules = __cpu_to_le32(0);
+	cfg->host_capab = __cpu_to_le32(0);
 
 	ath10k_wmi_put_host_mem_chunks(ar, chunks);
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index ad655c44afdb..f5031f3965c5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1209,6 +1209,11 @@ struct wmi_tlv_resource_config {
 	__le32 keep_alive_pattern_size;
 	__le32 max_tdls_concurrent_sleep_sta;
 	__le32 max_tdls_concurrent_buffer_sta;
+	__le32 wmi_send_separate;
+	__le32 num_ocb_vdevs;
+	__le32 num_ocb_channels;
+	__le32 num_ocb_schedules;
+	__le32 host_capab;
 } __packed;
 
 struct wmi_tlv_init_cmd {
-- 
2.17.1

[PATCH AUTOSEL 4.4 21/47] Bluetooth: hidp: Fix handling of strncpy for hid->name information

[Sasha Levin]

From: Marcel Holtmann <marcel@holtmann.org>

[ Upstream commit b3cadaa485f0c20add1644a5c877b0765b285c0c ]

This fixes two issues with setting hid->name information.

  CC      net/bluetooth/hidp/core.o
In function ‘hidp_setup_hid’,
    inlined from ‘hidp_session_dev_init’ at net/bluetooth/hidp/core.c:815:9,
    inlined from ‘hidp_session_new’ at net/bluetooth/hidp/core.c:953:8,
    inlined from ‘hidp_connection_add’ at net/bluetooth/hidp/core.c:1366:8:
net/bluetooth/hidp/core.c:778:2: warning: ‘strncpy’ output may be truncated copying 127 bytes from a string of length 127 [-Wstringop-truncation]
  strncpy(hid->name, req->name, sizeof(req->name) - 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  CC      net/bluetooth/hidp/core.o
net/bluetooth/hidp/core.c: In function ‘hidp_setup_hid’:
net/bluetooth/hidp/core.c:778:38: warning: argument to ‘sizeof’ in ‘strncpy’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
  strncpy(hid->name, req->name, sizeof(req->name));
                                      ^

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/bluetooth/hidp/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 1811f8e7ddf4..552e00b07196 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -774,7 +774,7 @@ static int hidp_setup_hid(struct hidp_session *session,
 	hid->version = req->version;
 	hid->country = req->country;
 
-	strncpy(hid->name, req->name, sizeof(req->name) - 1);
+	strncpy(hid->name, req->name, sizeof(hid->name));
 
 	snprintf(hid->phys, sizeof(hid->phys), "%pMR",
 		 &l2cap_pi(session->ctrl_sock->sk)->chan->src);
-- 
2.17.1

[PATCH AUTOSEL 4.4 22/47] x86/mm: Remove in_nmi() warning from vmalloc_fault()

[Sasha Levin]

From: Joerg Roedel <jroedel@suse.de>

[ Upstream commit 6863ea0cda8725072522cd78bda332d9a0b73150 ]

It is perfectly okay to take page-faults, especially on the
vmalloc area while executing an NMI handler. Remove the
warning.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David H. Gutteridge <dhgutteridge@sympatico.ca>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1532533683-5988-2-git-send-email-joro@8bytes.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/mm/fault.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index e0a34b0d381e..c4dffae5d939 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -273,8 +273,6 @@ static noinline int vmalloc_fault(unsigned long address)
 	if (!(address >= VMALLOC_START && address < VMALLOC_END))
 		return -1;
 
-	WARN_ON_ONCE(in_nmi());
-
 	/*
 	 * Synchronize this task's top level page-table
 	 * with the 'reference' page table.
-- 
2.17.1

Re: [PATCH AUTOSEL 4.4 22/47] x86/mm: Remove in_nmi() warning from vmalloc_fault()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 525 bytes --]

On Sun 2018-09-02 13:16:04, Sasha Levin wrote:
> From: Joerg Roedel <jroedel@suse.de>
> 
> [ Upstream commit 6863ea0cda8725072522cd78bda332d9a0b73150 ]
> 
> It is perfectly okay to take page-faults, especially on the
> vmalloc area while executing an NMI handler. Remove the
> warning.

I don't think this meets stable kernel criteria, as documented.
								Pavel
								
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCH AUTOSEL 4.4 23/47] x86/kexec: Allocate 8k PGDs for PTI

[Sasha Levin]

From: Joerg Roedel <jroedel@suse.de>

[ Upstream commit ca38dc8f2724d101038b1205122c93a1c7f38f11 ]

Fuzzing the PTI-x86-32 code with trinity showed unhandled
kernel paging request oops-messages that looked a lot like
silent data corruption.

Lot's of debugging and testing lead to the kexec-32bit code,
which is still allocating 4k PGDs when PTI is enabled. But
since it uses native_set_pud() to build the page-table, it
will unevitably call into __pti_set_user_pgtbl(), which
writes beyond the allocated 4k page.

Use PGD_ALLOCATION_ORDER to allocate PGDs in the kexec code
to fix the issue.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David H. Gutteridge <dhgutteridge@sympatico.ca>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1532533683-5988-4-git-send-email-joro@8bytes.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/kernel/machine_kexec_32.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index fd7e9937ddd6..e9359272c5cb 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -70,7 +70,7 @@ static void load_segments(void)
 
 static void machine_kexec_free_page_tables(struct kimage *image)
 {
-	free_page((unsigned long)image->arch.pgd);
+	free_pages((unsigned long)image->arch.pgd, PGD_ALLOCATION_ORDER);
 	image->arch.pgd = NULL;
 #ifdef CONFIG_X86_PAE
 	free_page((unsigned long)image->arch.pmd0);
@@ -86,7 +86,8 @@ static void machine_kexec_free_page_tables(struct kimage *image)
 
 static int machine_kexec_alloc_page_tables(struct kimage *image)
 {
-	image->arch.pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+	image->arch.pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+						    PGD_ALLOCATION_ORDER);
 #ifdef CONFIG_X86_PAE
 	image->arch.pmd0 = (pmd_t *)get_zeroed_page(GFP_KERNEL);
 	image->arch.pmd1 = (pmd_t *)get_zeroed_page(GFP_KERNEL);
-- 
2.17.1

[PATCH AUTOSEL 4.4 24/47] gpio: ml-ioh: Fix buffer underwrite on probe error path

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 4bf4eed44bfe288f459496eaf38089502ef91a79 ]

If ioh_gpio_probe() fails on devm_irq_alloc_descs() then chip may point
to any element of chip_save array, so reverse iteration from pointer chip
may become chip_save[-1] and gpiochip_remove() will operate with wrong
memory.

The patch fix the error path of ioh_gpio_probe() to correctly bypass
chip_save array.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpio/gpio-ml-ioh.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 5536108aa9db..fe21734bbe5c 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -495,9 +495,10 @@ static int ioh_gpio_probe(struct pci_dev *pdev,
 
 	chip = chip_save;
 err_gpiochip_add:
+	chip = chip_save;
 	while (--i >= 0) {
-		chip--;
 		gpiochip_remove(&chip->gpio);
+		chip++;
 	}
 	kfree(chip_save);
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 25/47] net: mvneta: fix mtu change on port without link

[Sasha Levin]

From: Yelena Krivosheev <yelena@marvell.com>

[ Upstream commit 8466baf788ec3e18836bd9c91ba0b1a07af25878 ]

It is incorrect to enable TX/RX queues (call by mvneta_port_up()) for
port without link. Indeed MTU change for interface without link causes TX
queues to stuck.

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP
network unit")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
[gregory.clement: adding Fixes tags and rewording commit log]
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index ea693bbf56d8..1c300259d70a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2569,7 +2569,6 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
 	}
 
 	mvneta_start_dev(pp);
-	mvneta_port_up(pp);
 
 	netdev_update_features(dev);
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 26/47] tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)

[Sasha Levin]

From: Peter Rosin <peda@axentia.se>

[ Upstream commit bb853aac2c478ce78116128263801189408ad2a8 ]

Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/tpm/tpm_i2c_infineon.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c
index 9f12ad74a09b..3b8e0ca12115 100644
--- a/drivers/char/tpm/tpm_i2c_infineon.c
+++ b/drivers/char/tpm/tpm_i2c_infineon.c
@@ -114,7 +114,7 @@ static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
 	/* Lock the adapter for the duration of the whole sequence. */
 	if (!tpm_dev.client->adapter->algo->master_xfer)
 		return -EOPNOTSUPP;
-	i2c_lock_adapter(tpm_dev.client->adapter);
+	i2c_lock_bus(tpm_dev.client->adapter, I2C_LOCK_SEGMENT);
 
 	if (tpm_dev.chip_type == SLB9645) {
 		/* use a combined read for newer chips
@@ -155,7 +155,7 @@ static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
 	}
 
 out:
-	i2c_unlock_adapter(tpm_dev.client->adapter);
+	i2c_unlock_bus(tpm_dev.client->adapter, I2C_LOCK_SEGMENT);
 	/* take care of 'guard time' */
 	usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
 
@@ -187,7 +187,7 @@ static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
 
 	if (!tpm_dev.client->adapter->algo->master_xfer)
 		return -EOPNOTSUPP;
-	i2c_lock_adapter(tpm_dev.client->adapter);
+	i2c_lock_bus(tpm_dev.client->adapter, I2C_LOCK_SEGMENT);
 
 	/* prepend the 'register address' to the buffer */
 	tpm_dev.buf[0] = addr;
@@ -206,7 +206,7 @@ static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
 		usleep_range(sleep_low, sleep_hi);
 	}
 
-	i2c_unlock_adapter(tpm_dev.client->adapter);
+	i2c_unlock_bus(tpm_dev.client->adapter, I2C_LOCK_SEGMENT);
 	/* take care of 'guard time' */
 	usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI);
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 27/47] MIPS: Octeon: add missing of_node_put()

[Sasha Levin]

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit b1259519e618d479ede8a0db5474b3aff99f5056 ]

The call to of_find_node_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19558/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/cavium-octeon/octeon-platform.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index d113c8ded6e2..6df3a4ea77fc 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -349,6 +349,7 @@ static int __init octeon_ehci_device_init(void)
 		return 0;
 
 	pd = of_find_device_by_node(ehci_node);
+	of_node_put(ehci_node);
 	if (!pd)
 		return 0;
 
@@ -411,6 +412,7 @@ static int __init octeon_ohci_device_init(void)
 		return 0;
 
 	pd = of_find_device_by_node(ohci_node);
+	of_node_put(ohci_node);
 	if (!pd)
 		return 0;
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 28/47] iio: ad9523: Fix return value for ad952x_store()

[Sasha Levin]

From: Lars-Peter Clausen <lars@metafoo.de>

[ Upstream commit 9a5094ca29ea9b1da301b31fd377c0c0c4c23034 ]

A sysfs write callback function needs to either return the number of
consumed characters or an error.

The ad952x_store() function currently returns 0 if the input value was "0",
this will signal that no characters have been consumed and the function
will be called repeatedly in a loop indefinitely. Fix this by returning
number of supplied characters to indicate that the whole input string has
been consumed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: cd1678f96329 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/frequency/ad9523.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
index 44a30f286de1..ea3c65366e00 100644
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -507,7 +507,7 @@ static ssize_t ad9523_store(struct device *dev,
 		return ret;
 
 	if (!state)
-		return 0;
+		return len;
 
 	mutex_lock(&indio_dev->mlock);
 	switch ((u32)this_attr->address) {
-- 
2.17.1

[PATCH AUTOSEL 4.4 29/47] net: dcb: For wild-card lookups, use priority -1, not 0

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 08193d1a893c802c4b807e4d522865061f4e9f4f ]

The function dcb_app_lookup walks the list of specified DCB APP entries,
looking for one that matches a given criteria: ifindex, selector,
protocol ID and optionally also priority. The "don't care" value for
priority is set to 0, because that priority has not been allowed under
CEE regime, which predates the IEEE standardization.

Under IEEE, 0 is a valid priority number. But because dcb_app_lookup
considers zero a wild card, attempts to add an APP entry with priority 0
fail when other entries exist for a given ifindex / selector / PID
triplet.

Fix by changing the wild-card value to -1.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/dcb/dcbnl.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 4f6c1862dfd2..6fe2b615518c 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1763,7 +1763,7 @@ static struct dcb_app_type *dcb_app_lookup(const struct dcb_app *app,
 		if (itr->app.selector == app->selector &&
 		    itr->app.protocol == app->protocol &&
 		    itr->ifindex == ifindex &&
-		    (!prio || itr->app.priority == prio))
+		    ((prio == -1) || itr->app.priority == prio))
 			return itr;
 	}
 
@@ -1798,7 +1798,8 @@ u8 dcb_getapp(struct net_device *dev, struct dcb_app *app)
 	u8 prio = 0;
 
 	spin_lock_bh(&dcb_lock);
-	if ((itr = dcb_app_lookup(app, dev->ifindex, 0)))
+	itr = dcb_app_lookup(app, dev->ifindex, -1);
+	if (itr)
 		prio = itr->app.priority;
 	spin_unlock_bh(&dcb_lock);
 
@@ -1826,7 +1827,8 @@ int dcb_setapp(struct net_device *dev, struct dcb_app *new)
 
 	spin_lock_bh(&dcb_lock);
 	/* Search for existing match and replace */
-	if ((itr = dcb_app_lookup(new, dev->ifindex, 0))) {
+	itr = dcb_app_lookup(new, dev->ifindex, -1);
+	if (itr) {
 		if (new->priority)
 			itr->app.priority = new->priority;
 		else {
@@ -1859,7 +1861,8 @@ u8 dcb_ieee_getapp_mask(struct net_device *dev, struct dcb_app *app)
 	u8 prio = 0;
 
 	spin_lock_bh(&dcb_lock);
-	if ((itr = dcb_app_lookup(app, dev->ifindex, 0)))
+	itr = dcb_app_lookup(app, dev->ifindex, -1);
+	if (itr)
 		prio |= 1 << itr->app.priority;
 	spin_unlock_bh(&dcb_lock);
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 30/47] Input: atmel_mxt_ts - only use first T9 instance

[Sasha Levin]

From: Nick Dyer <nick.dyer@itdev.co.uk>

[ Upstream commit 36f5d9ef26e52edff046b4b097855db89bf0cd4a ]

The driver only registers one input device, which uses the screen
parameters from the first T9 instance. The first T63 instance also uses
those parameters.

It is incorrect to send input reports from the second instances of these
objects if they are enabled: the input scaling will be wrong and the
positions will be mashed together.

This also causes problems on Android if the number of slots exceeds 32.

In the future, this could be handled by looking for enabled touch object
instances and creating an input device for each one.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 88dfe3008cf4..be2f2521c1c5 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1593,10 +1593,11 @@ static int mxt_get_object_table(struct mxt_data *data)
 			break;
 		case MXT_TOUCH_MULTI_T9:
 			data->multitouch = MXT_TOUCH_MULTI_T9;
+			/* Only handle messages from first T9 instance */
 			data->T9_reportid_min = min_id;
-			data->T9_reportid_max = max_id;
-			data->num_touchids = object->num_report_ids
-						* mxt_obj_instances(object);
+			data->T9_reportid_max = min_id +
+						object->num_report_ids - 1;
+			data->num_touchids = object->num_report_ids;
 			break;
 		case MXT_SPT_MESSAGECOUNT_T44:
 			data->T44_address = object->start_address;
-- 
2.17.1

[PATCH AUTOSEL 4.4 31/47] partitions/aix: append null character to print data from disk

[Sasha Levin]

From: Mauricio Faria de Oliveira <mfo@canonical.com>

[ Upstream commit d43fdae7bac2def8c4314b5a49822cb7f08a45f1 ]

Even if properly initialized, the lvname array (i.e., strings)
is read from disk, and might contain corrupt data (e.g., lack
the null terminating character for strings).

So, make sure the partition name string used in pr_warn() has
the null terminating character.

Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files")
Suggested-by: Daniel J. Axtens <daniel.axtens@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/partitions/aix.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/block/partitions/aix.c b/block/partitions/aix.c
index f3ed7b2d89bf..fa74698e12a6 100644
--- a/block/partitions/aix.c
+++ b/block/partitions/aix.c
@@ -281,10 +281,14 @@ int aix_partition(struct parsed_partitions *state)
 				next_lp_ix += 1;
 		}
 		for (i = 0; i < state->limit; i += 1)
-			if (lvip[i].pps_found && !lvip[i].lv_is_contiguous)
+			if (lvip[i].pps_found && !lvip[i].lv_is_contiguous) {
+				char tmp[sizeof(n[i].name) + 1]; // null char
+
+				snprintf(tmp, sizeof(tmp), "%s", n[i].name);
 				pr_warn("partition %s (%u pp's found) is "
 					"not contiguous\n",
-					n[i].name, lvip[i].pps_found);
+					tmp, lvip[i].pps_found);
+			}
 		kfree(pvd);
 	}
 	kfree(n);
-- 
2.17.1

[PATCH AUTOSEL 4.4 32/47] partitions/aix: fix usage of uninitialized lv_info and lvname structures

[Sasha Levin]

From: Mauricio Faria de Oliveira <mfo@canonical.com>

[ Upstream commit 14cb2c8a6c5dae57ee3e2da10fa3db2b9087e39e ]

The if-block that sets a successful return value in aix_partition()
uses 'lvip[].pps_per_lv' and 'n[].name' potentially uninitialized.

For example, if 'numlvs' is zero or alloc_lvn() fails, neither is
initialized, but are used anyway if alloc_pvd() succeeds after it.

So, make the alloc_pvd() call conditional on their initialization.

This has been hit when attaching an apparently corrupted/stressed
AIX LUN, misleading the kernel to pr_warn() invalid data and hang.

    [...] partition (null) (11 pp's found) is not contiguous
    [...] partition (null) (2 pp's found) is not contiguous
    [...] partition (null) (3 pp's found) is not contiguous
    [...] partition (null) (64 pp's found) is not contiguous

Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 block/partitions/aix.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/block/partitions/aix.c b/block/partitions/aix.c
index fa74698e12a6..8e7d358e0226 100644
--- a/block/partitions/aix.c
+++ b/block/partitions/aix.c
@@ -177,7 +177,7 @@ int aix_partition(struct parsed_partitions *state)
 	u32 vgda_sector = 0;
 	u32 vgda_len = 0;
 	int numlvs = 0;
-	struct pvd *pvd;
+	struct pvd *pvd = NULL;
 	struct lv_info {
 		unsigned short pps_per_lv;
 		unsigned short pps_found;
@@ -231,10 +231,11 @@ int aix_partition(struct parsed_partitions *state)
 				if (lvip[i].pps_per_lv)
 					foundlvs += 1;
 			}
+			/* pvd loops depend on n[].name and lvip[].pps_per_lv */
+			pvd = alloc_pvd(state, vgda_sector + 17);
 		}
 		put_dev_sector(sect);
 	}
-	pvd = alloc_pvd(state, vgda_sector + 17);
 	if (pvd) {
 		int numpps = be16_to_cpu(pvd->pp_count);
 		int psn_part1 = be32_to_cpu(pvd->psn_part1);
-- 
2.17.1

[PATCH AUTOSEL 4.4 33/47] media: em28xx: Fix DualHD disconnect oops

[Sasha Levin]

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 20cdcaf903298d54b834daedf65a2ddef70cae0a ]

During the duplication of em28xx state for the second tuner pair
a pointer to alt_max_pkt_size_isoc is copied. During tear down
the second tuner is destroyed first and kfrees alt_max_pkt_size_isoc,
then the first tuner is destroyed and kfrees it again. The property
should only be kfree'd if the tuner is PRIMARY_TS.

[  354.888560] ------------[ cut here ]------------
[  354.888562] kernel BUG at mm/slub.c:296!
[  354.888574] invalid opcode: 0000 [#1] SMP NOPTI
[  354.888869] CPU: 1 PID: 19 Comm: kworker/1:0 Not tainted 4.18.0-rc1+ #20
[  354.889140] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[  354.889408] Workqueue: usb_hub_wq hub_event
[  354.889679] RIP: 0010:__slab_free+0x217/0x370
[  354.889942] Code: bb c0 e8 07 41 38 c7 72 39 48 83 c4 70 5b 41 5a 41 5c 41 5d 41 5e 41 5f 5d 49 8d 62 f8 c3 f3 90 49 8b 04 24 a8 01 75 f6 eb 82 <0f> 0b 44 89 45 80 48 89 4d 88 e8 aa fa ff ff 85 c0 74 cc e9 b7 fe
[  354.890598] RSP: 0018:ffffb84c41a4fad0 EFLAGS: 00010246
[  354.890934] RAX: ffff948646e85150 RBX: ffff948646e85150 RCX: ffff948646e85150
[  354.891280] RDX: 00000000820001d9 RSI: fffffa8fd01ba140 RDI: ffff94865e807c00
[  354.891649] RBP: ffffb84c41a4fb70 R08: 0000000000000001 R09: ffffffffc059ce21
[  354.892025] R10: ffff948646e85150 R11: 0000000000000001 R12: fffffa8fd01ba140
[  354.892403] R13: ffff948646e85150 R14: ffff94865e807c00 R15: ffff94864c92e0a0
[  354.892780] FS:  0000000000000000(0000) GS:ffff94865ec40000(0000) knlGS:0000000000000000
[  354.893150] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  354.893530] CR2: 00007f4e476da950 CR3: 000000040112c000 CR4: 00000000003406e0
[  354.893917] Call Trace:
[  354.894315]  ? __dev_printk+0x3c/0x80
[  354.894695]  ? _dev_info+0x64/0x80
[  354.895082]  ? em28xx_free_device+0x41/0x50 [em28xx]
[  354.895464]  kfree+0x17a/0x190
[  354.895852]  ? kfree+0x17a/0x190
[  354.896310]  em28xx_free_device+0x41/0x50 [em28xx]
[  354.896698]  em28xx_usb_disconnect+0xfa/0x110 [em28xx]
[  354.897083]  usb_unbind_interface+0x7a/0x270
[  354.897475]  device_release_driver_internal+0x17c/0x250
[  354.897864]  device_release_driver+0x12/0x20
[  354.898252]  bus_remove_device+0xec/0x160
[  354.898639]  device_del+0x13d/0x320
[  354.899018]  ? usb_remove_ep_devs+0x1f/0x30
[  354.899392]  usb_disable_device+0x9e/0x270
[  354.899772]  usb_disconnect+0x92/0x2a0
[  354.900149]  hub_event+0x98e/0x1650
[  354.900519]  ? sched_clock_cpu+0x11/0xa0
[  354.900890]  process_one_work+0x167/0x3f0
[  354.901251]  worker_thread+0x4d/0x460
[  354.901610]  kthread+0x105/0x140
[  354.901964]  ? rescuer_thread+0x360/0x360
[  354.902318]  ? kthread_associate_blkcg+0xa0/0xa0
[  354.902672]  ret_from_fork+0x22/0x40
[  354.903024] Modules linked in: rc_hauppauge em28xx_rc rc_core si2157 lgdt3306a i2c_mux em28xx_dvb dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_common snd_hda_codec_hdmi nls_iso8859_1 edac_mce_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi aesni_intel snd_seq_midi_event aes_x86_64 snd_rawmidi crypto_simd em28xx cryptd glue_helper asix tveeprom usbnet snd_seq v4l2_common mii videodev snd_seq_device media input_leds snd_timer joydev ccp k10temp wmi_bmof snd soundcore mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables vfio_pci vfio_virqfd irqbypass vfio_iommu_type1 vfio nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops i2c_piix4 drm ahci libahci
[  354.905129]  wmi gpio_amdpt gpio_generic hid_generic usbhid hid
[  354.908140] ---[ end trace c230d02716298c34 ]---
[  354.908145] RIP: 0010:__slab_free+0x217/0x370
[  354.908147] Code: bb c0 e8 07 41 38 c7 72 39 48 83 c4 70 5b 41 5a 41 5c 41 5d 41 5e 41 5f 5d 49 8d 62 f8 c3 f3 90 49 8b 04 24 a8 01 75 f6 eb 82 <0f> 0b 44 89 45 80 48 89 4d 88 e8 aa fa ff ff 85 c0 74 cc e9 b7 fe
[  354.908183] RSP: 0018:ffffb84c41a4fad0 EFLAGS: 00010246
[  354.908186] RAX: ffff948646e85150 RBX: ffff948646e85150 RCX: ffff948646e85150
[  354.908189] RDX: 00000000820001d9 RSI: fffffa8fd01ba140 RDI: ffff94865e807c00
[  354.908191] RBP: ffffb84c41a4fb70 R08: 0000000000000001 R09: ffffffffc059ce21
[  354.908193] R10: ffff948646e85150 R11: 0000000000000001 R12: fffffa8fd01ba140
[  354.908195] R13: ffff948646e85150 R14: ffff94865e807c00 R15: ffff94864c92e0a0
[  354.908198] FS:  0000000000000000(0000) GS:ffff94865ec40000(0000) knlGS:0000000000000000
[  354.908201] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  354.908203] CR2: 00007f4e476da950 CR3: 000000016b20a000 CR4: 00000000003406e0

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 394004607059..c41e93b7828e 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3045,7 +3045,9 @@ void em28xx_free_device(struct kref *ref)
 	if (!dev->disconnected)
 		em28xx_release_resources(dev);
 
-	kfree(dev->alt_max_pkt_size_isoc);
+	if (dev->ts == PRIMARY_TS)
+		kfree(dev->alt_max_pkt_size_isoc);
+
 	kfree(dev);
 }
 EXPORT_SYMBOL_GPL(em28xx_free_device);
-- 
2.17.1

[PATCH AUTOSEL 4.4 34/47] iommu/ipmmu-vmsa: Fix allocation in atomic context

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 46583e8c48c5a094ba28060615b3a7c8c576690f ]

When attaching a device to an IOMMU group with
CONFIG_DEBUG_ATOMIC_SLEEP=y:

    BUG: sleeping function called from invalid context at mm/slab.h:421
    in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1
    ...
    Call trace:
     ...
     arm_lpae_alloc_pgtable+0x114/0x184
     arm_64_lpae_alloc_pgtable_s1+0x2c/0x128
     arm_32_lpae_alloc_pgtable_s1+0x40/0x6c
     alloc_io_pgtable_ops+0x60/0x88
     ipmmu_attach_device+0x140/0x334

ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable()
allocates memory using GFP_KERNEL.  Originally, the ipmmu-vmsa driver
had its own custom page table allocation implementation using
GFP_ATOMIC, hence the spinlock was fine.

Fix this by replacing the spinlock by a mutex, like the arm-smmu driver
does.

Fixes: f20ed39f53145e45 ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/ipmmu-vmsa.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index dfb868e2d129..624e7ff76166 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -44,7 +44,7 @@ struct ipmmu_vmsa_domain {
 	struct io_pgtable_ops *iop;
 
 	unsigned int context_id;
-	spinlock_t lock;			/* Protects mappings */
+	struct mutex mutex;			/* Protects mappings */
 };
 
 struct ipmmu_vmsa_archdata {
@@ -464,7 +464,7 @@ static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
 	if (!domain)
 		return NULL;
 
-	spin_lock_init(&domain->lock);
+	mutex_init(&domain->mutex);
 
 	return &domain->io_domain;
 }
@@ -488,7 +488,6 @@ static int ipmmu_attach_device(struct iommu_domain *io_domain,
 	struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu;
 	struct ipmmu_vmsa_device *mmu = archdata->mmu;
 	struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);
-	unsigned long flags;
 	unsigned int i;
 	int ret = 0;
 
@@ -497,7 +496,7 @@ static int ipmmu_attach_device(struct iommu_domain *io_domain,
 		return -ENXIO;
 	}
 
-	spin_lock_irqsave(&domain->lock, flags);
+	mutex_lock(&domain->mutex);
 
 	if (!domain->mmu) {
 		/* The domain hasn't been used yet, initialize it. */
@@ -513,7 +512,7 @@ static int ipmmu_attach_device(struct iommu_domain *io_domain,
 		ret = -EINVAL;
 	}
 
-	spin_unlock_irqrestore(&domain->lock, flags);
+	mutex_unlock(&domain->mutex);
 
 	if (ret < 0)
 		return ret;
-- 
2.17.1

[PATCH AUTOSEL 4.4 35/47] mfd: ti_am335x_tscadc: Fix struct clk memory leak

[Sasha Levin]

From: Zumeng Chen <zumeng.chen@gmail.com>

[ Upstream commit c2b1509c77a99a0dcea0a9051ca743cb88385f50 ]

Use devm_elk_get() to let Linux manage struct clk memory to avoid the following
memory leakage report:

unreferenced object 0xdd75efc0 (size 64):
  comm "systemd-udevd", pid 186, jiffies 4294945126 (age 1195.750s)
  hex dump (first 32 bytes):
    61 64 63 5f 74 73 63 5f 66 63 6b 00 00 00 00 00  adc_tsc_fck.....
    00 00 00 00 92 03 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<c0a15260>] kmemleak_alloc+0x40/0x74
    [<c0287a10>] __kmalloc_track_caller+0x198/0x388
    [<c0255610>] kstrdup+0x40/0x5c
    [<c025565c>] kstrdup_const+0x30/0x3c
    [<c0636630>] __clk_create_clk+0x60/0xac
    [<c0630918>] clk_get_sys+0x74/0x144
    [<c0630cdc>] clk_get+0x5c/0x68
    [<bf0ac540>] ti_tscadc_probe+0x260/0x468 [ti_am335x_tscadc]
    [<c06f3c0c>] platform_drv_probe+0x60/0xac
    [<c06f1abc>] driver_probe_device+0x214/0x2dc
    [<c06f1c18>] __driver_attach+0x94/0xc0
    [<c06efe2c>] bus_for_each_dev+0x90/0xa0
    [<c06f1470>] driver_attach+0x28/0x30
    [<c06f1030>] bus_add_driver+0x184/0x1ec
    [<c06f2b74>] driver_register+0xb0/0xf0
    [<c06f3b4c>] __platform_driver_register+0x40/0x54

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mfd/ti_am335x_tscadc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index e4e4b22eebc9..4a0f076c91ba 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -224,14 +224,13 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	 * The TSC_ADC_SS controller design assumes the OCP clock is
 	 * at least 6x faster than the ADC clock.
 	 */
-	clk = clk_get(&pdev->dev, "adc_tsc_fck");
+	clk = devm_clk_get(&pdev->dev, "adc_tsc_fck");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get TSC fck\n");
 		err = PTR_ERR(clk);
 		goto err_disable_clk;
 	}
 	clock_rate = clk_get_rate(clk);
-	clk_put(clk);
 	tscadc->clk_div = clock_rate / ADC_CLK;
 
 	/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
-- 
2.17.1

[PATCH AUTOSEL 4.4 36/47] f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit c77ec61ca0a49544ca81881cc5d5529858f7e196 ]

This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize
during mount, in order to avoid accessing across cache boundary with
this abnormal bitmap size.

- Overview
buffer overrun in build_sit_info() when mounting a crafted f2fs image

- Reproduce

- Kernel message
[  548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201)

[  548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
[  548.584979] ==================================================================
[  548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50
[  548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295

[  548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4
[  548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  548.589438] Call Trace:
[  548.589474]  dump_stack+0x7b/0xb5
[  548.589487]  print_address_description+0x70/0x290
[  548.589492]  kasan_report+0x291/0x390
[  548.589496]  ? kmemdup+0x36/0x50
[  548.589509]  check_memory_region+0x139/0x190
[  548.589514]  memcpy+0x23/0x50
[  548.589518]  kmemdup+0x36/0x50
[  548.589545]  f2fs_build_segment_manager+0x8fa/0x3410
[  548.589551]  ? __asan_loadN+0xf/0x20
[  548.589560]  ? f2fs_sanity_check_ckpt+0x1be/0x240
[  548.589566]  ? f2fs_flush_sit_entries+0x10c0/0x10c0
[  548.589587]  ? __put_user_ns+0x40/0x40
[  548.589604]  ? find_next_bit+0x57/0x90
[  548.589610]  f2fs_fill_super+0x194b/0x2b40
[  548.589617]  ? f2fs_commit_super+0x1b0/0x1b0
[  548.589637]  ? set_blocksize+0x90/0x140
[  548.589651]  mount_bdev+0x1c5/0x210
[  548.589655]  ? f2fs_commit_super+0x1b0/0x1b0
[  548.589667]  f2fs_mount+0x15/0x20
[  548.589672]  mount_fs+0x60/0x1a0
[  548.589683]  ? alloc_vfsmnt+0x309/0x360
[  548.589688]  vfs_kern_mount+0x6b/0x1a0
[  548.589699]  do_mount+0x34a/0x18c0
[  548.589710]  ? lockref_put_or_lock+0xcf/0x160
[  548.589716]  ? copy_mount_string+0x20/0x20
[  548.589728]  ? memcg_kmem_put_cache+0x1b/0xa0
[  548.589734]  ? kasan_check_write+0x14/0x20
[  548.589740]  ? _copy_from_user+0x6a/0x90
[  548.589744]  ? memdup_user+0x42/0x60
[  548.589750]  ksys_mount+0x83/0xd0
[  548.589755]  __x64_sys_mount+0x67/0x80
[  548.589781]  do_syscall_64+0x78/0x170
[  548.589797]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  548.589820] RIP: 0033:0x7f76fc331b9a
[  548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48
[  548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[  548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a
[  548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0
[  548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013
[  548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0
[  548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003

[  548.590242] The buggy address belongs to the page:
[  548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[  548.592886] flags: 0x2ffff0000000000()
[  548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000
[  548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[  548.603713] page dumped because: kasan: bad access detected

[  548.605203] Memory state around the buggy address:
[  548.606198]  ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  548.607676]  ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  548.610629]                                                                 ^
[  548.612088]  ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  548.613674]  ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  548.615141] ==================================================================
[  548.616613] Disabling lock debugging due to kernel taint
[  548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420
[  548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[  548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G    B             4.18.0-rc1+ #4
[  548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420
[  548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b
[  548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246
[  548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7
[  548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000
[  548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5
[  548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040
[  548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938
[  548.623299] FS:  00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000
[  548.623302] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0
[  548.623317] Call Trace:
[  548.623325]  ? kasan_check_read+0x11/0x20
[  548.623330]  ? __zone_watermark_ok+0x92/0x240
[  548.623336]  ? get_page_from_freelist+0x1c3/0x1d90
[  548.623347]  ? _raw_spin_lock_irqsave+0x2a/0x60
[  548.623353]  ? warn_alloc+0x250/0x250
[  548.623358]  ? save_stack+0x46/0xd0
[  548.623361]  ? kasan_kmalloc+0xad/0xe0
[  548.623366]  ? __isolate_free_page+0x2a0/0x2a0
[  548.623370]  ? mount_fs+0x60/0x1a0
[  548.623374]  ? vfs_kern_mount+0x6b/0x1a0
[  548.623378]  ? do_mount+0x34a/0x18c0
[  548.623383]  ? ksys_mount+0x83/0xd0
[  548.623387]  ? __x64_sys_mount+0x67/0x80
[  548.623391]  ? do_syscall_64+0x78/0x170
[  548.623396]  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  548.623401]  __alloc_pages_nodemask+0x3c5/0x400
[  548.623407]  ? __alloc_pages_slowpath+0x1420/0x1420
[  548.623412]  ? __mutex_lock_slowpath+0x20/0x20
[  548.623417]  ? kvmalloc_node+0x31/0x80
[  548.623424]  alloc_pages_current+0x75/0x110
[  548.623436]  kmalloc_order+0x24/0x60
[  548.623442]  kmalloc_order_trace+0x24/0xb0
[  548.623448]  __kmalloc_track_caller+0x207/0x220
[  548.623455]  ? f2fs_build_node_manager+0x399/0xbb0
[  548.623460]  kmemdup+0x20/0x50
[  548.623465]  f2fs_build_node_manager+0x399/0xbb0
[  548.623470]  f2fs_fill_super+0x195e/0x2b40
[  548.623477]  ? f2fs_commit_super+0x1b0/0x1b0
[  548.623481]  ? set_blocksize+0x90/0x140
[  548.623486]  mount_bdev+0x1c5/0x210
[  548.623489]  ? f2fs_commit_super+0x1b0/0x1b0
[  548.623495]  f2fs_mount+0x15/0x20
[  548.623498]  mount_fs+0x60/0x1a0
[  548.623503]  ? alloc_vfsmnt+0x309/0x360
[  548.623508]  vfs_kern_mount+0x6b/0x1a0
[  548.623513]  do_mount+0x34a/0x18c0
[  548.623518]  ? lockref_put_or_lock+0xcf/0x160
[  548.623523]  ? copy_mount_string+0x20/0x20
[  548.623528]  ? memcg_kmem_put_cache+0x1b/0xa0
[  548.623533]  ? kasan_check_write+0x14/0x20
[  548.623537]  ? _copy_from_user+0x6a/0x90
[  548.623542]  ? memdup_user+0x42/0x60
[  548.623547]  ksys_mount+0x83/0xd0
[  548.623552]  __x64_sys_mount+0x67/0x80
[  548.623557]  do_syscall_64+0x78/0x170
[  548.623562]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  548.623566] RIP: 0033:0x7f76fc331b9a
[  548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48
[  548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[  548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a
[  548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0
[  548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013
[  548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0
[  548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003
[  548.623650] ---[ end trace 4ce02f25ff7d3df5 ]---
[  548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager
[  548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201)

[  548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
[  548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager

- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578

	sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL);

Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size.

Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech.

Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/f2fs/super.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 6cc67e1bbb41..2ffc53d0c9c7 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1079,12 +1079,17 @@ static int sanity_check_ckpt(struct f2fs_sb_info *sbi)
 	struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi);
 	struct f2fs_checkpoint *ckpt = F2FS_CKPT(sbi);
 	unsigned int main_segs, blocks_per_seg;
+	unsigned int sit_segs, nat_segs;
+	unsigned int sit_bitmap_size, nat_bitmap_size;
+	unsigned int log_blocks_per_seg;
 	int i;
 
 	total = le32_to_cpu(raw_super->segment_count);
 	fsmeta = le32_to_cpu(raw_super->segment_count_ckpt);
-	fsmeta += le32_to_cpu(raw_super->segment_count_sit);
-	fsmeta += le32_to_cpu(raw_super->segment_count_nat);
+	sit_segs = le32_to_cpu(raw_super->segment_count_sit);
+	fsmeta += sit_segs;
+	nat_segs = le32_to_cpu(raw_super->segment_count_nat);
+	fsmeta += nat_segs;
 	fsmeta += le32_to_cpu(ckpt->rsvd_segment_count);
 	fsmeta += le32_to_cpu(raw_super->segment_count_ssa);
 
@@ -1105,6 +1110,18 @@ static int sanity_check_ckpt(struct f2fs_sb_info *sbi)
 			return 1;
 	}
 
+	sit_bitmap_size = le32_to_cpu(ckpt->sit_ver_bitmap_bytesize);
+	nat_bitmap_size = le32_to_cpu(ckpt->nat_ver_bitmap_bytesize);
+	log_blocks_per_seg = le32_to_cpu(raw_super->log_blocks_per_seg);
+
+	if (sit_bitmap_size != ((sit_segs / 2) << log_blocks_per_seg) / 8 ||
+		nat_bitmap_size != ((nat_segs / 2) << log_blocks_per_seg) / 8) {
+		f2fs_msg(sbi->sb, KERN_ERR,
+			"Wrong bitmap size: sit: %u, nat:%u",
+			sit_bitmap_size, nat_bitmap_size);
+		return 1;
+	}
+
 	if (unlikely(f2fs_cp_error(sbi))) {
 		f2fs_msg(sbi->sb, KERN_ERR, "A bug case: need to run fsck");
 		return 1;
-- 
2.17.1

[PATCH AUTOSEL 4.4 38/47] ALSA: wss: Fix sparse warning wrt PCM format type

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 6be9a60efb401487a4d658ef23d652a9e6860b34 ]

The PCM format type is with __bitwise, and it can't be converted from
integer implicitly.  Instead of an ugly cast, declare the function
argument of snd_wss_get_format() with the proper snd_pcm_format_t
type.

This fixes the sparse warnings like:
  sound/isa/wss/wss_lib.c:551:14: warning: restricted snd_pcm_format_t degrades to integer

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/isa/wss/wss_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 913b731d2236..72b2cacc9e0e 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -541,7 +541,7 @@ static unsigned char snd_wss_get_rate(unsigned int rate)
 }
 
 static unsigned char snd_wss_get_format(struct snd_wss *chip,
-					int format,
+					snd_pcm_format_t format,
 					int channels)
 {
 	unsigned char rformat;
-- 
2.17.1

[PATCH AUTOSEL 4.4 37/47] ALSA: riptide: Properly endian notations

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit be05e3de3a933156d472127f659d4473c461dcc5 ]

The SG descriptor of Riptide contains the little-endian values, hence
we need to define with __le32 properly.  This fixes sparse warnings
like:
  sound/pci/riptide/riptide.c:1112:40: warning: cast to restricted __le32

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/pci/riptide/riptide.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 94639d6b5fb5..38c01cc061a0 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -470,10 +470,10 @@ struct snd_riptide {
 };
 
 struct sgd {			/* scatter gather desriptor */
-	u32 dwNextLink;
-	u32 dwSegPtrPhys;
-	u32 dwSegLen;
-	u32 dwStat_Ctl;
+	__le32 dwNextLink;
+	__le32 dwSegPtrPhys;
+	__le32 dwSegLen;
+	__le32 dwStat_Ctl;
 };
 
 struct pcmhw {			/* pcm descriptor */
-- 
2.17.1

[PATCH AUTOSEL 4.4 39/47] ALSA: sb: Fix PCM format bit calculation

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 55ff2d1ea5487fe131cce399baf4503dcf5cc8e1 ]

The PCM format type in snd_pcm_format_t can't be treated as integer
implicitly since it's with __bitwise.  We have already a helper
function to get the bit index of the given type, and use it in each
place instead.

This fixes sparse warnings like:
  sound/isa/sb/sb16_main.c:61:44: warning: restricted snd_pcm_format_t degrades to integer

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/isa/sb/sb16_main.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c
index 8b2d6c6bfe97..218d4193791a 100644
--- a/sound/isa/sb/sb16_main.c
+++ b/sound/isa/sb/sb16_main.c
@@ -49,6 +49,9 @@ MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
 MODULE_DESCRIPTION("Routines for control of 16-bit SoundBlaster cards and clones");
 MODULE_LICENSE("GPL");
 
+#define runtime_format_bits(runtime) \
+	((unsigned int)pcm_format_to_bits((runtime)->format))
+
 #ifdef CONFIG_SND_SB16_CSP
 static void snd_sb16_csp_playback_prepare(struct snd_sb *chip, struct snd_pcm_runtime *runtime)
 {
@@ -58,7 +61,7 @@ static void snd_sb16_csp_playback_prepare(struct snd_sb *chip, struct snd_pcm_ru
 		if (csp->running & SNDRV_SB_CSP_ST_LOADED) {
 			/* manually loaded codec */
 			if ((csp->mode & SNDRV_SB_CSP_MODE_DSP_WRITE) &&
-			    ((1U << runtime->format) == csp->acc_format)) {
+			    (runtime_format_bits(runtime) == csp->acc_format)) {
 				/* Supported runtime PCM format for playback */
 				if (csp->ops.csp_use(csp) == 0) {
 					/* If CSP was successfully acquired */
@@ -66,7 +69,7 @@ static void snd_sb16_csp_playback_prepare(struct snd_sb *chip, struct snd_pcm_ru
 				}
 			} else if ((csp->mode & SNDRV_SB_CSP_MODE_QSOUND) && (csp->q_enabled)) {
 				/* QSound decoder is loaded and enabled */
-				if ((1 << runtime->format) & (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 |
+				if (runtime_format_bits(runtime) & (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 |
 							      SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE)) {
 					/* Only for simple PCM formats */
 					if (csp->ops.csp_use(csp) == 0) {
@@ -106,7 +109,7 @@ static void snd_sb16_csp_capture_prepare(struct snd_sb *chip, struct snd_pcm_run
 		if (csp->running & SNDRV_SB_CSP_ST_LOADED) {
 			/* manually loaded codec */
 			if ((csp->mode & SNDRV_SB_CSP_MODE_DSP_READ) &&
-			    ((1U << runtime->format) == csp->acc_format)) {
+			    (runtime_format_bits(runtime) == csp->acc_format)) {
 				/* Supported runtime PCM format for capture */
 				if (csp->ops.csp_use(csp) == 0) {
 					/* If CSP was successfully acquired */
-- 
2.17.1

[PATCH AUTOSEL 4.4 40/47] ALSA: asihpi: Fix PCM format notations

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit a91a0e774984aa57090c39dc3269a812417737ed ]

asihpi driver treats -1 as an own invalid PCM format, but this needs
a proper cast with __force prefix since PCM format type is __bitwise.
Define a constant with the proper type and use it allover.

This fixes sparse warnings like:
  sound/pci/asihpi/asihpi.c:315:9: warning: incorrect type in initializer (different base types)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/pci/asihpi/asihpi.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index 1039eccbb895..50f4185b2bd1 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -311,27 +311,29 @@ static void print_hwparams(struct snd_pcm_substream *substream,
 		snd_pcm_format_width(params_format(p)) / 8);
 }
 
+#define INVALID_FORMAT	(__force snd_pcm_format_t)(-1)
+
 static snd_pcm_format_t hpi_to_alsa_formats[] = {
-	-1,			/* INVALID */
+	INVALID_FORMAT,		/* INVALID */
 	SNDRV_PCM_FORMAT_U8,	/* HPI_FORMAT_PCM8_UNSIGNED        1 */
 	SNDRV_PCM_FORMAT_S16,	/* HPI_FORMAT_PCM16_SIGNED         2 */
-	-1,			/* HPI_FORMAT_MPEG_L1              3 */
+	INVALID_FORMAT,		/* HPI_FORMAT_MPEG_L1              3 */
 	SNDRV_PCM_FORMAT_MPEG,	/* HPI_FORMAT_MPEG_L2              4 */
 	SNDRV_PCM_FORMAT_MPEG,	/* HPI_FORMAT_MPEG_L3              5 */
-	-1,			/* HPI_FORMAT_DOLBY_AC2            6 */
-	-1,			/* HPI_FORMAT_DOLBY_AC3            7 */
+	INVALID_FORMAT,		/* HPI_FORMAT_DOLBY_AC2            6 */
+	INVALID_FORMAT,		/* HPI_FORMAT_DOLBY_AC3            7 */
 	SNDRV_PCM_FORMAT_S16_BE,/* HPI_FORMAT_PCM16_BIGENDIAN      8 */
-	-1,			/* HPI_FORMAT_AA_TAGIT1_HITS       9 */
-	-1,			/* HPI_FORMAT_AA_TAGIT1_INSERTS   10 */
+	INVALID_FORMAT,		/* HPI_FORMAT_AA_TAGIT1_HITS       9 */
+	INVALID_FORMAT,		/* HPI_FORMAT_AA_TAGIT1_INSERTS   10 */
 	SNDRV_PCM_FORMAT_S32,	/* HPI_FORMAT_PCM32_SIGNED        11 */
-	-1,			/* HPI_FORMAT_RAW_BITSTREAM       12 */
-	-1,			/* HPI_FORMAT_AA_TAGIT1_HITS_EX1  13 */
+	INVALID_FORMAT,		/* HPI_FORMAT_RAW_BITSTREAM       12 */
+	INVALID_FORMAT,		/* HPI_FORMAT_AA_TAGIT1_HITS_EX1  13 */
 	SNDRV_PCM_FORMAT_FLOAT,	/* HPI_FORMAT_PCM32_FLOAT         14 */
 #if 1
 	/* ALSA can't handle 3 byte sample size together with power-of-2
 	 *  constraint on buffer_bytes, so disable this format
 	 */
-	-1
+	INVALID_FORMAT
 #else
 	/* SNDRV_PCM_FORMAT_S24_3LE */ /* HPI_FORMAT_PCM24_SIGNED 15 */
 #endif
@@ -1030,7 +1032,7 @@ static u64 snd_card_asihpi_playback_formats(struct snd_card_asihpi *asihpi,
 					format, sample_rate, 128000, 0);
 		if (!err)
 			err = hpi_outstream_query_format(h_stream, &hpi_format);
-		if (!err && (hpi_to_alsa_formats[format] != -1))
+		if (!err && (hpi_to_alsa_formats[format] != INVALID_FORMAT))
 			formats |= pcm_format_to_bits(hpi_to_alsa_formats[format]);
 	}
 	return formats;
@@ -1213,7 +1215,7 @@ static u64 snd_card_asihpi_capture_formats(struct snd_card_asihpi *asihpi,
 					format, sample_rate, 128000, 0);
 		if (!err)
 			err = hpi_instream_query_format(h_stream, &hpi_format);
-		if (!err && (hpi_to_alsa_formats[format] != -1))
+		if (!err && (hpi_to_alsa_formats[format] != INVALID_FORMAT))
 			formats |= pcm_format_to_bits(hpi_to_alsa_formats[format]);
 	}
 	return formats;
-- 
2.17.1

[PATCH AUTOSEL 4.4 41/47] ALSA: ad1816a: Fix sparse warning wrt PCM format type

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d63f33d3f083bdb3a7c2dfd623f4d811b2a8d772 ]

The PCM format type is with __bitwise, and it can't be converted from
integer implicitly.  Instead of an ugly cast, declare the function
argument of snd_ad1816a_get_format() with the proper snd_pcm_format_t
type.

This fixes the sparse warning like:
  sound/isa/ad1816a/ad1816a_lib.c:93:14: warning: restricted snd_pcm_format_t degrades to integer

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/isa/ad1816a/ad1816a_lib.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c
index 5c815f5fb044..099480afa6b9 100644
--- a/sound/isa/ad1816a/ad1816a_lib.c
+++ b/sound/isa/ad1816a/ad1816a_lib.c
@@ -85,7 +85,8 @@ static void snd_ad1816a_write_mask(struct snd_ad1816a *chip, unsigned char reg,
 
 
 static unsigned char snd_ad1816a_get_format(struct snd_ad1816a *chip,
-					    unsigned int format, int channels)
+					    snd_pcm_format_t format,
+					    int channels)
 {
 	unsigned char retval = AD1816A_FMT_LINEAR_8;
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 42/47] ALSA: hda: Fix implicit PCM format type conversion

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit a6ea5fe95ab4a1a7af6d57429fe3ecde9acf5b5a ]

The PCM format type is defined with __bitwise, hence it can't be
passed as integer but needs an explicit cast.  In this patch, instead
of the messy cast flood, define the format argument of
snd_hdac_calc_stream_format() to be the proper snd_pcm_format_t type.

This fixes sparse warnings like:
  sound/hda/hdac_device.c:760:38: warning: incorrect type in argument 1 (different base types)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/sound/hdaudio.h | 3 ++-
 sound/hda/hdac_device.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h
index e2b712c90d3f..5afe0e3d2553 100644
--- a/include/sound/hdaudio.h
+++ b/include/sound/hdaudio.h
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/timecounter.h>
 #include <sound/core.h>
+#include <sound/pcm.h>
 #include <sound/memalloc.h>
 #include <sound/hda_verbs.h>
 #include <drm/i915_component.h>
@@ -132,7 +133,7 @@ int snd_hdac_get_sub_nodes(struct hdac_device *codec, hda_nid_t nid,
 			   hda_nid_t *start_id);
 unsigned int snd_hdac_calc_stream_format(unsigned int rate,
 					 unsigned int channels,
-					 unsigned int format,
+					 snd_pcm_format_t format,
 					 unsigned int maxbps,
 					 unsigned short spdif_ctls);
 int snd_hdac_query_supported_pcm(struct hdac_device *codec, hda_nid_t nid,
diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index e361024eabb6..f7e31b1fe8d8 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -745,7 +745,7 @@ static struct hda_rate_tbl rate_bits[] = {
  */
 unsigned int snd_hdac_calc_stream_format(unsigned int rate,
 					 unsigned int channels,
-					 unsigned int format,
+					 snd_pcm_format_t format,
 					 unsigned int maxbps,
 					 unsigned short spdif_ctls)
 {
-- 
2.17.1

[PATCH AUTOSEL 4.4 43/47] ALSA: au88x0: Fix sparse warning wrt PCM format type

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 10d3d91e3bc4e152a580bf523e4fd6bf279ae532 ]

The PCM format type is with __bitwise, and it can't be converted from
integer implicitly.  Instead of an ugly cast, declare the function
argument of vortex_alsafmt_aspfmt() with the proper snd_pcm_format_t
type.

This fixes the sparse warning like:
  sound/pci/au88x0/au88x0_core.c:2778:14: warning: restricted snd_pcm_format_t degrades to integer

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/pci/au88x0/au88x0.h      | 2 +-
 sound/pci/au88x0/au88x0_core.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/au88x0/au88x0.h b/sound/pci/au88x0/au88x0.h
index bcc648bf6478..e3e31f07d766 100644
--- a/sound/pci/au88x0/au88x0.h
+++ b/sound/pci/au88x0/au88x0.h
@@ -241,7 +241,7 @@ static int vortex_core_init(vortex_t * card);
 static int vortex_core_shutdown(vortex_t * card);
 static void vortex_enable_int(vortex_t * card);
 static irqreturn_t vortex_interrupt(int irq, void *dev_id);
-static int vortex_alsafmt_aspfmt(int alsafmt, vortex_t *v);
+static int vortex_alsafmt_aspfmt(snd_pcm_format_t alsafmt, vortex_t *v);
 
 /* Connection  stuff. */
 static void vortex_connect_default(vortex_t * vortex, int en);
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 065a69cf6118..f0ab264d9560 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -2770,7 +2770,7 @@ static int vortex_core_shutdown(vortex_t * vortex)
 
 /* Alsa support. */
 
-static int vortex_alsafmt_aspfmt(int alsafmt, vortex_t *v)
+static int vortex_alsafmt_aspfmt(snd_pcm_format_t alsafmt, vortex_t *v)
 {
 	int fmt;
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 44/47] ALSA: sb: Fix sparse warning wrt PCM format type

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit e5d3765b6c4cb3ba64295a4205a2f68a4e8fe083 ]

The PCM format type is with __bitwise, and it can't be converted from
integer implicitly.  Instead of an ugly cast, declare the function
argument of snd_sb_csp_autoload() with the proper snd_pcm_format_t
type.

This fixes the sparse warnings like:
  sound/isa/sb/sb16_csp.c:743:22: warning: restricted snd_pcm_format_t degrades to integer

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/sound/sb16_csp.h | 2 +-
 sound/isa/sb/sb16_csp.c  | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/sound/sb16_csp.h b/include/sound/sb16_csp.h
index c7c7788005e4..7817e88bd08d 100644
--- a/include/sound/sb16_csp.h
+++ b/include/sound/sb16_csp.h
@@ -46,7 +46,7 @@ enum {
 struct snd_sb_csp_ops {
 	int (*csp_use) (struct snd_sb_csp * p);
 	int (*csp_unuse) (struct snd_sb_csp * p);
-	int (*csp_autoload) (struct snd_sb_csp * p, int pcm_sfmt, int play_rec_mode);
+	int (*csp_autoload) (struct snd_sb_csp * p, snd_pcm_format_t pcm_sfmt, int play_rec_mode);
 	int (*csp_start) (struct snd_sb_csp * p, int sample_width, int channels);
 	int (*csp_stop) (struct snd_sb_csp * p);
 	int (*csp_qsound_transfer) (struct snd_sb_csp * p);
diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 48da2276683d..f9ad09eae74b 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -93,7 +93,7 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p,
 				struct snd_sb_csp_microcode __user * code);
 static int snd_sb_csp_unload(struct snd_sb_csp * p);
 static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags);
-static int snd_sb_csp_autoload(struct snd_sb_csp * p, int pcm_sfmt, int play_rec_mode);
+static int snd_sb_csp_autoload(struct snd_sb_csp * p, snd_pcm_format_t pcm_sfmt, int play_rec_mode);
 static int snd_sb_csp_check_version(struct snd_sb_csp * p);
 
 static int snd_sb_csp_use(struct snd_sb_csp * p);
@@ -726,7 +726,7 @@ static int snd_sb_csp_firmware_load(struct snd_sb_csp *p, int index, int flags)
  * autoload hardware codec if necessary
  * return 0 if CSP is loaded and ready to run (p->running != 0)
  */
-static int snd_sb_csp_autoload(struct snd_sb_csp * p, int pcm_sfmt, int play_rec_mode)
+static int snd_sb_csp_autoload(struct snd_sb_csp * p, snd_pcm_format_t pcm_sfmt, int play_rec_mode)
 {
 	unsigned long flags;
 	int err = 0;
@@ -736,7 +736,7 @@ static int snd_sb_csp_autoload(struct snd_sb_csp * p, int pcm_sfmt, int play_rec
 		return -EBUSY;
 
 	/* autoload microcode only if requested hardware codec is not already loaded */
-	if (((1 << pcm_sfmt) & p->acc_format) && (play_rec_mode & p->mode)) {
+	if (((1U << (__force int)pcm_sfmt) & p->acc_format) && (play_rec_mode & p->mode)) {
 		p->running = SNDRV_SB_CSP_ST_AUTO;
 	} else {
 		switch (pcm_sfmt) {
-- 
2.17.1

[PATCH AUTOSEL 4.4 45/47] MIPS: WARN_ON invalid DMA cache maintenance, not BUG_ON

[Sasha Levin]

From: Paul Burton <paul.burton@imgtec.com>

[ Upstream commit d4da0e97baea8768b3d66ccef3967bebd50dfc3b ]

If a driver causes DMA cache maintenance with a zero length then we
currently BUG and kill the kernel. As this is a scenario that we may
well be able to recover from, WARN & return in the condition instead.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/14623/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/mm/c-r4k.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5d3a25e1cfae..52e8c2026853 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -712,7 +712,8 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
 	/* Catch bad driver code */
-	BUG_ON(size == 0);
+	if (WARN_ON(size == 0))
+		return;
 
 	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
@@ -745,7 +746,8 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 {
 	/* Catch bad driver code */
-	BUG_ON(size == 0);
+	if (WARN_ON(size == 0))
+		return;
 
 	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
-- 
2.17.1

[PATCH AUTOSEL 4.4 46/47] RDMA/cma: Do not ignore net namespace for unbound cm_id

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 643d213a9a034fa04f5575a40dfc8548e33ce04f ]

Currently if the cm_id is not bound to any netdevice, than for such cm_id,
net namespace is ignored; which is incorrect.

Regardless of cm_id bound to a netdevice or not, net namespace must
match. When a cm_id is bound to a netdevice, in such case net namespace
and netdevice both must match.

Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cma.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index d57a78ec7425..0f42411d6a79 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1280,9 +1280,16 @@ static bool cma_match_net_dev(const struct rdma_cm_id *id,
 		       (addr->src_addr.ss_family == AF_IB ||
 			cma_protocol_roce_dev_port(id->device, port_num));
 
-	return !addr->dev_addr.bound_dev_if ||
-	       (net_eq(dev_net(net_dev), addr->dev_addr.net) &&
-		addr->dev_addr.bound_dev_if == net_dev->ifindex);
+	/*
+	 * Net namespaces must match, and if the listner is listening
+	 * on a specific netdevice than netdevice must match as well.
+	 */
+	if (net_eq(dev_net(net_dev), addr->dev_addr.net) &&
+	    (!!addr->dev_addr.bound_dev_if ==
+	     (addr->dev_addr.bound_dev_if == net_dev->ifindex)))
+		return true;
+	else
+		return false;
 }
 
 static struct rdma_id_private *cma_find_listener(
-- 
2.17.1

[PATCH AUTOSEL 4.4 47/47] fuse: Add missed unlock_page() to fuse_readpages_fill()

[Sasha Levin]

From: Kirill Tkhai <ktkhai@virtuozzo.com>

[ Upstream commit 109728ccc5933151c68d1106e4065478a487a323 ]

The above error path returns with page unlocked, so this place seems also
to behave the same.

Fixes: f8dbdf81821b ("fuse: rework fuse_readpages()")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/fuse/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 1a063cbfe503..8577f3ba6dc6 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -879,6 +879,7 @@ static int fuse_readpages_fill(void *_data, struct page *page)
 	}
 
 	if (WARN_ON(req->num_pages >= req->max_pages)) {
+		unlock_page(page);
 		fuse_put_request(fc, req);
 		return -EIO;
 	}
-- 
2.17.1