LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Anholt <eric@anholt.net>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	linux-rpi-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 25/29] staging: bcm2835-audio: Use coherent device buffers
Date: Tue,  4 Sep 2018 17:58:54 +0200
Message-ID: <20180904155858.8001-26-tiwai@suse.de> (raw)
In-Reply-To: <20180904155858.8001-1-tiwai@suse.de>

The memory access to the pages allocated with
SNDRV_DMA_TYPE_CONTINUOUS are basically non-coherent, and it becomes a
problem when a process accesses via mmap.

For the more consistent access, use the device coherent memory, just
by replacing the call pattern in the allocator helpers.

The only point we need to be careful for is the device object passed
there; since bcm2835-audio driver creates fake devices and each card
is created on top of that, we need to pass its parent device as the
real device object.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 .../vc04_services/bcm2835-audio/bcm2835-pcm.c        | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
index d2373e4a4d53..8b8e286587cb 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c
@@ -345,8 +345,8 @@ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, u32 numchannels)
 
 	/* pre-allocation of buffers */
 	/* NOTE: this may fail */
-	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
-					      snd_dma_continuous_data(GFP_KERNEL),
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+					      chip->card->dev->parent,
 					      snd_bcm2835_playback_hw.buffer_bytes_max,
 					      snd_bcm2835_playback_hw.buffer_bytes_max);
 
@@ -371,8 +371,8 @@ int snd_bcm2835_new_spdif_pcm(struct bcm2835_chip *chip)
 
 	/* pre-allocation of buffers */
 	/* NOTE: this may fail */
-	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
-		snd_dma_continuous_data(GFP_KERNEL),
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+		chip->card->dev->parent,
 		snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max);
 
 	return 0;
@@ -404,8 +404,8 @@ int snd_bcm2835_new_simple_pcm(struct bcm2835_chip *chip,
 
 	snd_pcm_lib_preallocate_pages_for_all(
 		pcm,
-		SNDRV_DMA_TYPE_CONTINUOUS,
-		snd_dma_continuous_data(GFP_KERNEL),
+		SNDRV_DMA_TYPE_DEV,
+		chip->card->dev->parent,
 		snd_bcm2835_playback_hw.buffer_bytes_max,
 		snd_bcm2835_playback_hw.buffer_bytes_max);
 
-- 
2.18.0


  parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04 15:58 [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes Takashi Iwai
2018-09-04 15:58 ` [PATCH 01/29] staging: bcm2835-audio: Clean up mutex locks Takashi Iwai
2018-09-04 15:58 ` [PATCH 02/29] staging: bcm2835-audio: Remove redundant spdif stream ctls Takashi Iwai
2018-09-04 15:58 ` [PATCH 03/29] staging: bcm2835-audio: Clean up include files in bcm2835-ctl.c Takashi Iwai
2018-09-08 13:25   ` Stefan Wahren
2018-09-08 16:21     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 04/29] staging: bcm2835-audio: Remove redundant substream mask checks Takashi Iwai
2018-09-04 15:58 ` [PATCH 05/29] staging: bcm2835-audio: Fix mute controls, volume handling cleanup Takashi Iwai
2018-09-04 15:58 ` [PATCH 06/29] staging: bcm2835-audio: Remove redundant function calls Takashi Iwai
2018-09-04 15:58 ` [PATCH 07/29] staging: bcm2835-audio: Remove superfluous open flag Takashi Iwai
2018-09-04 15:58 ` [PATCH 08/29] staging: bcm2835-audio: Drop useless running flag and check Takashi Iwai
2018-09-04 15:58 ` [PATCH 09/29] staging: bcm2835-audio: Fix incorrect draining handling Takashi Iwai
2018-09-04 15:58 ` [PATCH 10/29] staging: bcm2835-audio: Kill unused spinlock Takashi Iwai
2018-09-04 15:58 ` [PATCH 11/29] staging: bcm2835-audio: Use PCM runtime values instead Takashi Iwai
2018-09-04 15:58 ` [PATCH 12/29] staging: bcm2835-audio: Drop unnecessary pcm indirect setup Takashi Iwai
2018-09-04 15:58 ` [PATCH 13/29] staging: bcm2835-audio: Drop useless NULL check Takashi Iwai
2018-09-04 15:58 ` [PATCH 14/29] staging: bcm2835-audio: Propagate parameter setup error Takashi Iwai
2018-09-04 15:58 ` [PATCH 15/29] staging: bcm2835-audio: Drop debug messages in bcm2835-pcm.c Takashi Iwai
2018-09-04 15:58 ` [PATCH 16/29] staging: bcm2835-audio: Drop superfluous mutex lock during prepare Takashi Iwai
2018-09-08 13:40   ` Stefan Wahren
2018-09-08 16:12     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 17/29] staging: bcm2835-audio: Add 10ms period constraint Takashi Iwai
2018-09-19  9:42   ` Stefan Wahren
2018-09-19  9:52     ` Takashi Iwai
2018-09-19 12:41       ` Stefan Wahren
2018-09-19 12:47         ` Mike Brady
2018-09-19 18:39         ` Takashi Iwai
2018-10-09 13:18           ` [PATCH 17/29] staging: bcm2835-audio: Add 10ms period constraint [Resend in plain text...] Mike Brady
2018-10-09 13:44             ` Takashi Iwai
2018-10-09 15:28               ` Mike Brady
2018-10-09 15:32                 ` Takashi Iwai
2018-10-11 12:53                 ` Mike Brady
2018-10-11 14:07                   ` Stefan Wahren
2018-10-13 15:00                   ` Mike Brady
2018-10-13 15:45                     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 18/29] staging: bcm2835-audio: Make single vchi handle Takashi Iwai
2018-09-04 15:58 ` [PATCH 19/29] staging: bcm2835-audio: Code refactoring of vchiq accessor codes Takashi Iwai
2018-09-04 15:58 ` [PATCH 20/29] staging: bcm2835-audio: Operate non-atomic PCM ops Takashi Iwai
2018-09-04 15:58 ` [PATCH 21/29] staging: bcm2835-audio: Use card->private_data Takashi Iwai
2018-09-04 15:58 ` [PATCH 22/29] staging: bcm2835-audio: Use standard error print helpers Takashi Iwai
2018-09-04 15:58 ` [PATCH 23/29] staging: bcm2835-audio: Remove unnecessary header file includes Takashi Iwai
2018-09-04 15:58 ` [PATCH 24/29] staging: bcm2835-audio: Move module parameter description Takashi Iwai
2018-09-04 15:58 ` Takashi Iwai [this message]
2018-09-04 15:58 ` [PATCH 26/29] staging: bcm2835-audio: Set SNDRV_PCM_INFO_SYNC_APPLPTR Takashi Iwai
2018-09-04 15:58 ` [PATCH 27/29] staging: bcm2835-audio: Simplify PCM creation helpers Takashi Iwai
2018-09-04 15:58 ` [PATCH 28/29] staging: bcm2835-audio: Simplify kctl " Takashi Iwai
2018-09-04 15:58 ` [PATCH 29/29] staging: bcm2835-audio: Simplify card object management Takashi Iwai
2018-09-08 13:18 ` [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes Stefan Wahren
2018-09-08 16:21   ` Takashi Iwai
2018-09-08 17:00     ` Stefan Wahren
2018-09-08 17:16       ` Takashi Iwai
2018-09-10  9:12     ` Greg Kroah-Hartman
2018-09-10  9:16       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180904155858.8001-26-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=eric@anholt.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=stefan.wahren@i2se.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git