[PATCH 1/3] power: supply: Add driver for TI BQ2416X battery charger

[PATCH 1/3] power: supply: Add driver for TI BQ2416X battery charger

[Karsten Mueller]

This patch set is to add power driver for TI BQ2416X.

Driver is tested with BQ24160 and is based on:
 https://lore.kernel.org/patchwork/patch/758105/

Signed-off-by: Karsten Mueller <mueller.k@efe-gmbh.de>
---
 drivers/power/supply/Kconfig           |    6 +
 drivers/power/supply/Makefile          |    1 +
 drivers/power/supply/bq2416x_charger.c | 1669 ++++++++++++++++++++++++
 3 files changed, 1676 insertions(+)
 create mode 100644 drivers/power/supply/bq2416x_charger.c

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index ff6dab0bf..6e3604458 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -543,6 +543,12 @@ config CHARGER_BQ2415X
 	  You'll need this driver to charge batteries on e.g. Nokia
 	  RX-51/N900.
 
+config CHARGER_BQ2416X
+	tristate "TI BQ2416x Dual-Input, Single Cell Switch-Mode Li-Ion charger"
+	depends on I2C
+	help
+	  Say Y here to enable support for the TI BQ2416x battery charger.
+
 config CHARGER_BQ24190
 	tristate "TI BQ24190 battery charger driver"
 	depends on I2C
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index a26b402c4..f44b24e41 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_QCOM_SMBB)	+= qcom_smbb.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
+obj-$(CONFIG_CHARGER_BQ2416X)	+= bq2416x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
 obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
 obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
diff --git a/drivers/power/supply/bq2416x_charger.c b/drivers/power/supply/bq2416x_charger.c
new file mode 100644
index 000000000..88ddbde5a
--- /dev/null
+++ b/drivers/power/supply/bq2416x_charger.c
@@ -0,0 +1,1669 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Driver for BQ2416X Li-Ion Battery Charger
+ *
+ * Copyright (C) 2015 Verifone, Inc.
+ * Wojciech Ziemba <wojciech.ziemba@verifone.com>
+ *
+ * Copyright (C) 2018 EFE GmbH
+ * Karsten Müller <mueller.k@efe-gmbh.de>
+ * Jens Renner <renner@efe-gmbh.de>
+ *
+ * The bq2416x series is a 2.5A, Dual-Input, Single-Cell Switched-Mode
+ * Li-Ion Battery Charger with Power Path Management and I2C Interface.
+ *
+ * This driver was tested on BQ24160.
+ *
+ * Datasheets:
+ * http://www.ti.com/product/bq24160
+ * http://www.ti.com/product/bq24160a
+ * http://www.ti.com/product/bq24161
+ * http://www.ti.com/product/bq24161b
+ * http://www.ti.com/product/bq24163
+ * http://www.ti.com/product/bq24168
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+/* Get the value of bitfield */
+#define BF_GET(_y, _mask) (((_y) & _mask) >> (__builtin_ffs((int) _mask) - 1))
+/* Shift the value of bitfield. Mask based */
+#define BF_SHIFT(_x, _mask) ((_x) << (__builtin_ffs((int) _mask) - 1))
+/* Watchdog timer. 10 seconds in reserve */
+#define BQ2416X_WATCHDOG_TIMER	(30 - 10)
+/* Register numbers */
+#define BQ2416X_REG_STATUS	0x00
+#define BQ2416X_REG_SUP_STATUS	0x01
+#define BQ2416X_REG_CONTROL	0x02
+#define BQ2416X_REG_BAT_VOLT	0x03
+#define BQ2416X_REG_VENDOR	0x04
+#define BQ2416X_REG_TERM	0x05
+#define BQ2416X_REG_DPM		0x06
+#define BQ2416X_REG_NTC		0x07
+#define BQ2416X_REG_MAX		0x08
+
+/* status/control register */
+#define BQ2416X_REG_STATUS_TMR_RST_MASK	BIT(7)
+#define BQ2416X_REG_STATUS_STAT_MASK		(BIT(6) | BIT(5) | BIT(4))
+#define BQ2416X_REG_STATUS_SUPPLY_SEL_MASK	BIT(3)
+#define BQ2416X_REG_STATUS_FAULT_MASK		(BIT(2) | BIT(1) | BIT(0))
+
+/* battery/supply status register */
+#define BQ2416X_REG_SUP_STATUS_INSTAT_MASK	(BIT(7) | BIT(6))
+#define BQ2416X_REG_SUP_STATUS_USBSTAT_MASK	(BIT(5) | BIT(4))
+#define BQ2416X_REG_SUP_STATUS_OTG_LOCK_MASK	BIT(3)
+#define BQ2416X_REG_SUP_STATUS_BATSTAT_MASK	(BIT(2) | BIT(1))
+#define BQ2416X_REG_SUP_STATUS_EN_NOBATOP_MASK	BIT(0)
+
+/* control register */
+#define BQ2416X_REG_CONTROL_RESET_MASK		BIT(7)
+#define BQ2416X_REG_CONTROL_USB_CURR_LIM_MASK	(BIT(6) | BIT(5) | BIT(4))
+#define BQ2416X_REG_CONTROL_EN_STAT_MASK	BIT(3)
+#define BQ2416X_REG_CONTROL_TE_MASK		BIT(2)
+#define BQ2416X_REG_CONTROL_CE_MASK		BIT(1)
+#define BQ2416X_REG_CONTROL_HZ_MODE_MASK	BIT(0)
+
+/* control/battery voltage register */
+#define BQ2416X_REG_BAT_VOLT_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						BIT(4) | BIT(3) | BIT(2))
+#define BQ2416X_REG_BAT_VOLT_IN_CURR_LIM_MASK	BIT(1)
+#define BQ2416X_REG_BAT_VOLT_USB_DETECT_MASK	BIT(0)
+
+/* vendor/part/revision register */
+#define BQ2416X_REG_VENDOR_REV_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ2416X_REG_VENDOR_CODE_MASK		(BIT(7) | BIT(6) | BIT(5))
+
+/* battery termination fast charge current register */
+#define BQ2416X_REG_TERM_CHRG_CURR_MASK	(BIT(7) | BIT(6) | BIT(5) | \
+						BIT(4) | BIT(3))
+#define BQ2416X_REG_TERM_TERM_CURR_MASK	(BIT(2) | BIT(1) | BIT(0))
+
+/* VIN-DPM voltage/DPPM status register */
+#define BQ2416X_REG_DPM_MINSYS_STATUS_MASK	BIT(7)
+#define BQ2416X_REG_DPM_STATUS_MASK		BIT(6)
+#define BQ2416X_REG_DPM_USB_VOLT_MASK		(BIT(5) | BIT(4) | BIT(3))
+#define BQ2416X_REG_DPM_IN_VOLT_MASK		(BIT(2) | BIT(1) | BIT(0))
+
+/* Safety timer/NTC monitor register */
+#define BQ2416X_REG_NTC_TMRX2_MASK		BIT(7)
+#define BQ2416X_REG_NTC_TMR_MASK		(BIT(6) | BIT(5))
+#define BQ2416X_REG_NTC_TS_EN_MASK		BIT(3)
+#define BQ2416X_REG_NTC_TS_FAULT_MASK		(BIT(2) | BIT(1))
+#define BQ2416X_REG_NTC_LOW_CHARGE_MASK	BIT(0)
+
+/* Charge voltage [uV] */
+#define BQ2416X_CHARGE_VOLTAGE_MIN		3500000
+#define BQ2416X_CHARGE_VOLTAGE_MAX		4440000
+#define BQ2416X_CHARGE_VOLTAGE_STEP		20000
+
+/* IN current limit */
+#define BQ2416X_IN_CURR_LIM_1500		0
+#define BQ2416X_IN_CURR_LIM_2500		1
+
+/* Charge current [uA] */
+#define BQ2416X_CHARGE_CURRENT_MIN		550000
+#define BQ2416X_CHARGE_CURRENT_MAX		2500000
+#define BQ2416X_CHARGE_CURRENT_STEP		75000
+
+/* Charge termination current in uA */
+#define BQ2416X_CHARGE_TERM_CURRENT_MIN		50000
+#define BQ2416X_CHARGE_TERM_CURRENT_MAX		400000
+#define BQ2416X_CHARGE_TERM_CURRENT_STEP	50000
+
+/* USB DPM voltage [uV] */
+#define BQ2416X_DPM_USB_VOLTAGE_MIN		4200000
+#define BQ2416X_DPM_USB_VOLTAGE_MAX		4760000
+#define BQ2416X_DPM_USB_VOLTAGE_STEP		80000
+
+/* IN DPM voltage [uV] */
+#define BQ2416X_DPM_IN_VOLTAGE_MIN		4200000
+#define BQ2416X_DPM_IN_VOLTAGE_MAX		4760000
+#define BQ2416X_DPM_IN_VOLTAGE_STEP		80000
+
+/* Supported chips */
+enum  bq2416x_type {
+	BQ24160 = 0,
+	BQ24160A,
+	BQ24161,
+	BQ24161B,
+	BQ24163,
+	BQ24168,
+};
+
+/* Charger status */
+enum {
+	STAT_NO_VALID_SOURCE = 0,
+	STAT_IN_READY,
+	STAT_USB_READY,
+	STAT_CHARGING_FROM_IN,
+	STAT_CHARGING_FROM_USB,
+	STAT_CHARGE_DONE,
+	STAT_NA,
+	STAT_FAULT,
+};
+
+/* Charger status to power subsys status map */
+static const int bq2416x_charge_status[] = {
+	[STAT_NO_VALID_SOURCE] = POWER_SUPPLY_STATUS_NOT_CHARGING,
+	[STAT_IN_READY] = POWER_SUPPLY_STATUS_NOT_CHARGING,
+	[STAT_USB_READY] = POWER_SUPPLY_STATUS_NOT_CHARGING,
+	[STAT_CHARGING_FROM_IN] = POWER_SUPPLY_STATUS_CHARGING,
+	[STAT_CHARGING_FROM_USB] = POWER_SUPPLY_STATUS_CHARGING,
+	[STAT_CHARGE_DONE] = POWER_SUPPLY_STATUS_FULL,
+	[STAT_NA] = POWER_SUPPLY_STATUS_UNKNOWN,
+	[STAT_FAULT] = POWER_SUPPLY_STATUS_NOT_CHARGING,
+};
+
+/* Charger fault */
+enum {
+	FAULT_NORMAL = 0,
+	FAULT_THERMAL_SHUTDOWN,
+	FAULT_BATT_TEMP_FAULT,
+	FAULT_WDOG_TIMER_EXPIRED,
+	FAULT_SAFETY_TIMER_EXPIRED,
+	FAULT_IN_SUPPLY_FAULT,
+	FAULT_USB_SUPPLY_FAULT,
+	FAULT_BATTERY_FAULT,
+};
+
+/* Charger fault to power subsys fault map */
+static const struct {
+	const char * const str;
+	const int id;
+} bq2416x_charge_fault[] = {
+	[FAULT_NORMAL] = {"Normal", POWER_SUPPLY_HEALTH_GOOD},
+	[FAULT_THERMAL_SHUTDOWN] = {"Thermal shutdown",
+				POWER_SUPPLY_HEALTH_OVERHEAT},
+	[FAULT_BATT_TEMP_FAULT] = {"Battery temp fault",
+				POWER_SUPPLY_HEALTH_OVERHEAT},
+	[FAULT_WDOG_TIMER_EXPIRED] = {"Watchdog timer expired",
+				POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE},
+	[FAULT_SAFETY_TIMER_EXPIRED] = {"Safety timer expired",
+				POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE},
+	[FAULT_IN_SUPPLY_FAULT] = {"IN Supply fault",
+				POWER_SUPPLY_HEALTH_UNSPEC_FAILURE},
+	[FAULT_USB_SUPPLY_FAULT] = {"USB Supply fault",
+				POWER_SUPPLY_HEALTH_UNSPEC_FAILURE},
+	[FAULT_BATTERY_FAULT] = {"Battery fault", POWER_SUPPLY_HEALTH_DEAD},
+};
+
+/* IN(Wall) source status */
+enum {
+	INSTAT_NORMAL = 0,
+	INSTAT_SUPPLY_OVP,
+	INSTAT_WEAK_SOURCE_CONNECTED,
+	INSTAT_FAULTY_ADAPTER,
+};
+
+/* IN(Wall) source status to string map */
+static const char * const bq2416x_in_status[] = {
+	[INSTAT_NORMAL] = "Normal",
+	[INSTAT_SUPPLY_OVP] = "OVP",
+	[INSTAT_WEAK_SOURCE_CONNECTED] = "Weak source",
+	[INSTAT_FAULTY_ADAPTER] = "Faulty adapter",
+};
+
+/* Battery status */
+enum {
+	BATSTAT_BATTERY_PRESENT = 0,
+	BATSTAT_BATTERY_OVP,
+	BATSTAT_BATTERY_NOT_PRESENT,
+	BATSTAT_BATTERY_NA,
+};
+
+/* IN(Wall) source limit */
+enum in_curr_lim {
+	IN_CURR_LIM_1500MA = 0,
+	IN_CURR_LIM_2500MA,
+};
+
+/*
+ * USB source current limit
+ * AUTO as auto detection (BQ24160/0A/3) or limit of default mode
+ */
+enum usb_curr_lim {
+	USB_CURR_LIM_AUTO   = -EINVAL,
+	USB_CURR_LIM_100MA  = 0,
+	USB_CURR_LIM_150MA  = 1,
+	USB_CURR_LIM_500MA  = 2,
+	USB_CURR_LIM_800MA  = 3,
+	USB_CURR_LIM_900MA  = 4,
+	USB_CURR_LIM_1500MA = 5,
+};
+
+/* Safety timer settings */
+enum safe_tmr {
+	TMR_27MIN = 0,
+	TMR_6H,
+	TMR_9H,
+	TMR_OFF,
+};
+
+static const int bq2416x_usb_curr_lim[] = {
+	[USB_CURR_LIM_100MA]	= 100000,
+	[USB_CURR_LIM_150MA]	= 150000,
+	[USB_CURR_LIM_500MA]	= 500000,
+	[USB_CURR_LIM_800MA]	= 800000,
+	[USB_CURR_LIM_900MA]	= 900000,
+	[USB_CURR_LIM_1500MA]	= 1500000,
+};
+
+static const int bq24160_in_lim[] = {
+	[IN_CURR_LIM_1500MA] = 1500000,
+	[IN_CURR_LIM_2500MA] = 2500000,
+};
+
+/* External NTC Monitoring(TS) fault */
+enum {
+	TS_FAULT_NORMAL,
+	TS_FAULT_COLD_HOT,
+	TS_FAULT_COOL,
+	TS_FAULT_WARM,
+};
+
+static const char * const bq2416x_ts_fault[] = {
+	[TS_FAULT_NORMAL] = "normal",
+	[TS_FAULT_COLD_HOT] = "cold/hot (charge suspended)",
+	[TS_FAULT_COOL] = "cool (half current charge)",
+	[TS_FAULT_WARM] = "warm (voltage reduced)",
+};
+
+/* Firmware response: chip revision */
+enum {
+	VENDOR_REV_10 = 0,
+	VENDOR_REV_11,
+	VENDOR_REV_20,
+	VENDOR_REV_21,
+	VENDOR_REV_22,
+	VENDOR_REV_23,
+};
+
+static const char * const bq2416x_revision[] = {
+	[VENDOR_REV_10] = "1.0",
+	[VENDOR_REV_11] = "1.1",
+	[VENDOR_REV_20] = "2.0",
+	[VENDOR_REV_21] = "2.1",
+	[VENDOR_REV_22] = "2.2",
+	[VENDOR_REV_23] = "2.3",
+};
+
+/**
+ * struct bq2416x_initdata - Config data for bq2416x chip.
+ * It contains default board voltages and currents.
+ * @charge_voltage: charge voltage in [uV]
+ * @charge_current: charge current in [uA]
+ * @in_curr_limit: Current limit for IN source. Enum 1.5A or 2.5A
+ * @usb_curr_limit: Current limit for USB source.
+ *  Enum 100mA - 1500mA or AUTO for using auto detection
+ * @curr_term_en: enable charge termination by current
+ * @nobat_mode: enable no battery operation mode
+ *  (charge disable, curr_term = off, nobat_op = 1)
+ * @term_current: charge termination current in [uA]
+ * @usb_dpm_voltage: USB DPM voltage [uV]
+ * @in_dpm_voltage: IN DPM voltage [uV]
+ * @stat_pin_en: status pin enable
+ * @safety_timer: safety timer enum: 27min, 6h, 9h, off.
+ */
+struct bq2416x_initdata {
+	int charge_voltage;
+	int charge_current;
+	enum in_curr_lim in_curr_limit;
+	enum usb_curr_lim usb_curr_limit;
+	int curr_term_en;
+	int nobat_mode;
+	int term_current;
+	int usb_dpm_voltage;
+	int in_dpm_voltage;
+	int stat_pin_en;
+	enum safe_tmr safety_timer;
+};
+
+/* Default: no battery mode, battery can be specified in DT */
+const struct bq2416x_initdata initdefault = {
+	.charge_voltage		= 4200000,
+	.charge_current		= 0,
+	.in_curr_limit		= IN_CURR_LIM_1500MA,
+	.usb_curr_limit		= USB_CURR_LIM_AUTO,
+	.curr_term_en		= 0,
+	.nobat_mode		= 1,
+	.term_current		= 0,
+	.usb_dpm_voltage	= 4200000,
+	.in_dpm_voltage		= 4200000,
+	.stat_pin_en		= 1,
+	.safety_timer		= TMR_9H
+};
+
+/**
+ * struct bq2416x_priv - this device's private data
+ * @dev: this device
+ * @regmap: register map for bq2416x
+ * @pdata: platform data
+ * @psy: power-supply class for this device
+ * @watchdog: watchdog worker
+ * @model: model of this device
+ * @name: the name of this device instance
+ * @idr: the id of this chip
+ */
+struct bq2416x_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct bq2416x_initdata idata;
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	struct delayed_work watchdog;
+	u8 fault_reg;
+	u8 stat_reg;
+	char *model;
+	char *name;
+	int idr;
+};
+
+/* each registered chip must have a unique id */
+static DEFINE_IDR(bq2416x_idr);
+static DEFINE_MUTEX(bq2416x_idr_mutex);
+
+/*
+ * Return the index in 'tbl' of greatest value that is less than or equal to
+ * 'val'.  The index range returned is 0 to 'tbl_size' - 1.  Assumes that
+ * the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
+ * is less than 2^8.
+ */
+static u8 bq2416x_find_idx(const int tbl[], int tbl_size, int v)
+{
+	int i;
+
+	for (i = 1; i < tbl_size; i++)
+		if (v < tbl[i])
+			break;
+
+	return i - 1;
+}
+
+/*
+ * Converts value to its regulation binary representation.
+ */
+static inline unsigned int conv2bit_repr(unsigned int val, unsigned int min,
+					unsigned int max, unsigned int step)
+{
+	return (clamp_val(val, min, max) - min) / step;
+}
+
+/*
+ * Regmap callbacks and configuration
+ * All registers except vendor register are writeable and should not be cached.
+ */
+static bool bq2416x_writeable(struct device *dev, unsigned int reg)
+{
+	return !(reg == BQ2416X_REG_VENDOR);
+}
+
+static struct regmap_config bq2416x_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.writeable_reg = bq2416x_writeable,
+	.volatile_reg = bq2416x_writeable,
+	.cache_type = REGCACHE_NONE,
+	.max_register = BQ2416X_REG_MAX,
+};
+
+/* Power-supply class callbacks and configuration */
+static int bq2416x_property_is_writeable(struct power_supply *psy,
+					enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property bq2416x_power_supply_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_SCOPE
+};
+
+static int bq2416x_set_status(struct bq2416x_priv *bq2416x, int status)
+{
+	unsigned int charge_disable;
+	int ret;
+
+	if (status == POWER_SUPPLY_STATUS_CHARGING)
+		charge_disable = 0;
+	else if (status == POWER_SUPPLY_STATUS_NOT_CHARGING)
+		charge_disable = BQ2416X_REG_CONTROL_CE_MASK;
+	else
+		return -EINVAL;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_CONTROL,
+			BQ2416X_REG_CONTROL_RESET_MASK |
+			BQ2416X_REG_CONTROL_CE_MASK,
+			charge_disable);
+
+	return ret;
+}
+
+static int bq2416x_get_status(struct bq2416x_priv *bq2416x, int *status)
+{
+	unsigned int reg_val;
+	int ret;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_STATUS, &reg_val);
+	if (unlikely(ret))
+		return ret;
+
+	reg_val = BF_GET(reg_val, BQ2416X_REG_STATUS_STAT_MASK);
+	*status = bq2416x_charge_status[reg_val];
+
+	return ret;
+}
+
+static int bq2416x_get_charge_type(struct bq2416x_priv *bq2416x,
+					int *charge_type)
+{
+	unsigned int reg_val;
+	int ret;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_STATUS, &reg_val);
+	if (unlikely(ret))
+		return ret;
+
+	reg_val = BF_GET(reg_val, BQ2416X_REG_STATUS_STAT_MASK);
+	if (bq2416x_charge_status[reg_val] != POWER_SUPPLY_STATUS_CHARGING)
+		*charge_type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+	else {
+		ret = regmap_read(bq2416x->regmap, BQ2416X_REG_NTC, &reg_val);
+		if (unlikely(ret))
+			return ret;
+
+		if (reg_val & BQ2416X_REG_NTC_LOW_CHARGE_MASK)
+			*charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		else
+			*charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+	}
+
+	return ret;
+}
+
+static int bq2416x_set_charge_type(struct bq2416x_priv *bq2416x,
+					int type)
+{
+	int ret;
+	unsigned int charge_disable;
+	unsigned int low_charge;
+
+	switch (type) {
+	case POWER_SUPPLY_CHARGE_TYPE_NONE:
+		charge_disable = BQ2416X_REG_CONTROL_CE_MASK;
+		low_charge = 0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+		charge_disable = 0;
+		low_charge = BQ2416X_REG_NTC_LOW_CHARGE_MASK;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_FAST:
+		charge_disable = 0;
+		low_charge = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_CONTROL,
+				BQ2416X_REG_CONTROL_RESET_MASK |
+				BQ2416X_REG_CONTROL_CE_MASK,
+				charge_disable);
+	if (unlikely(ret))
+		return ret;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_NTC,
+				BQ2416X_REG_NTC_LOW_CHARGE_MASK,
+				low_charge);
+
+	return ret;
+}
+
+static int bq2416x_get_bat_present(struct bq2416x_priv *bq2416x, int *present)
+{
+	unsigned int reg_val;
+	int ret;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_SUP_STATUS, &reg_val);
+	if (unlikely(ret))
+		return ret;
+	reg_val = BF_GET(reg_val, BQ2416X_REG_SUP_STATUS_BATSTAT_MASK);
+
+	*present = (reg_val == BATSTAT_BATTERY_PRESENT) ||
+			(reg_val == BATSTAT_BATTERY_OVP);
+
+	return ret;
+}
+
+static int bq2416x_get_online(struct bq2416x_priv *bq2416x, int *online)
+{
+	unsigned int reg_val;
+	int ret;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_STATUS, &reg_val);
+	if (unlikely(ret))
+		return ret;
+
+	reg_val = BF_GET(reg_val, BQ2416X_REG_STATUS_STAT_MASK);
+	*online = ((reg_val > STAT_NO_VALID_SOURCE) && (reg_val < STAT_NA));
+
+	return ret;
+}
+
+static int bq2416x_get_charge_current(struct bq2416x_priv *bq2416x,
+					int *curr)
+{
+	int ret;
+	unsigned int low_charge;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_TERM, curr);
+	if (unlikely(ret))
+		return ret;
+
+	*curr = BF_GET(*curr, BQ2416X_REG_TERM_CHRG_CURR_MASK) *
+		BQ2416X_CHARGE_CURRENT_STEP +
+		BQ2416X_CHARGE_CURRENT_MIN;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_NTC, &low_charge);
+	if (unlikely(ret))
+		return ret;
+
+	/* halve the current value if in low_charge state */
+	*curr >>= low_charge & BQ2416X_REG_NTC_LOW_CHARGE_MASK;
+
+	return ret;
+}
+
+static int bq2416x_set_charge_current(struct bq2416x_priv *bq2416x, int curr)
+{
+	int ret;
+	unsigned int reg_bits;
+
+	reg_bits = conv2bit_repr(curr, BQ2416X_CHARGE_CURRENT_MIN,
+			BQ2416X_CHARGE_CURRENT_MAX,
+			BQ2416X_CHARGE_CURRENT_STEP);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_TERM,
+				BQ2416X_REG_TERM_CHRG_CURR_MASK,
+				BF_SHIFT(reg_bits,
+				BQ2416X_REG_TERM_CHRG_CURR_MASK));
+	if (unlikely(ret))
+		return ret;
+
+	/* unset low charge */
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_NTC,
+				BQ2416X_REG_NTC_LOW_CHARGE_MASK,
+				0);
+	return ret;
+}
+
+static int bq2416x_get_charge_voltage(struct bq2416x_priv *bq2416x,
+					int *voltage)
+{
+	int ret;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_BAT_VOLT, voltage);
+	if (unlikely(ret))
+		return ret;
+
+	*voltage = BF_GET(*voltage, BQ2416X_REG_BAT_VOLT_MASK) *
+		BQ2416X_CHARGE_VOLTAGE_STEP +
+		BQ2416X_CHARGE_VOLTAGE_MIN;
+
+	return ret;
+}
+
+static int bq2416x_set_charge_voltage(struct bq2416x_priv *bq2416x,
+					int voltage)
+{
+	int ret;
+	unsigned int reg_bits;
+
+	reg_bits = conv2bit_repr(voltage, BQ2416X_CHARGE_VOLTAGE_MIN,
+			BQ2416X_CHARGE_VOLTAGE_MAX,
+			BQ2416X_CHARGE_VOLTAGE_STEP);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_BAT_VOLT,
+				BQ2416X_REG_BAT_VOLT_MASK,
+				BF_SHIFT(reg_bits, BQ2416X_REG_BAT_VOLT_MASK));
+	return ret;
+}
+
+static int bq2416x_get_term_current(struct bq2416x_priv *bq2416x,
+					unsigned int *term_current)
+{
+	int term_curr;
+	int ret;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_TERM, &term_curr);
+	if (unlikely(ret))
+		return ret;
+
+	*term_current = BF_GET(term_curr, BQ2416X_REG_TERM_TERM_CURR_MASK) *
+			BQ2416X_CHARGE_TERM_CURRENT_STEP +
+			BQ2416X_CHARGE_TERM_CURRENT_MIN;
+	return ret;
+}
+
+static int bq2416x_set_term_current(struct bq2416x_priv *bq2416x,
+					int term_curr)
+{
+	int ret;
+	unsigned int reg_bits;
+
+	reg_bits = conv2bit_repr(term_curr, BQ2416X_CHARGE_TERM_CURRENT_MIN,
+			BQ2416X_CHARGE_TERM_CURRENT_MAX,
+			BQ2416X_CHARGE_TERM_CURRENT_STEP);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_TERM,
+				BQ2416X_REG_TERM_TERM_CURR_MASK,
+				BF_SHIFT(reg_bits,
+				BQ2416X_REG_TERM_TERM_CURR_MASK));
+	if (unlikely(ret))
+		return ret;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_NTC,
+				BQ2416X_REG_NTC_LOW_CHARGE_MASK,
+				0);
+	return ret;
+}
+
+static int bq2416x_set_usb_dpm_voltage(struct bq2416x_priv *bq2416x,
+					int dpm_volt)
+{
+	int ret;
+	unsigned int reg_bits;
+
+	reg_bits = conv2bit_repr(dpm_volt, BQ2416X_DPM_USB_VOLTAGE_MIN,
+			BQ2416X_DPM_USB_VOLTAGE_MAX,
+			BQ2416X_DPM_USB_VOLTAGE_STEP);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_DPM,
+			BQ2416X_REG_DPM_USB_VOLT_MASK,
+			BF_SHIFT(reg_bits, BQ2416X_REG_DPM_USB_VOLT_MASK));
+
+	return ret;
+}
+
+static int bq2416x_set_in_dpm_voltage(struct bq2416x_priv *bq2416x,
+					int dpm_volt)
+{
+	int ret;
+	unsigned int reg_bits;
+
+	reg_bits = conv2bit_repr(dpm_volt, BQ2416X_DPM_IN_VOLTAGE_MIN,
+			BQ2416X_DPM_IN_VOLTAGE_MAX,
+			BQ2416X_DPM_IN_VOLTAGE_STEP);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_DPM,
+			BQ2416X_REG_DPM_IN_VOLT_MASK,
+			BF_SHIFT(reg_bits, BQ2416X_REG_DPM_IN_VOLT_MASK));
+	return ret;
+}
+
+/*
+ * Check (and clear) fault bits, detect new fault status and save last fault.
+ * It should be called before reading status register to not lose any faults.
+ */
+static int bq2416x_check_fault(struct bq2416x_priv *bq2416x, bool klog_en)
+{
+	int ret, reg_val, fault;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_STATUS, &reg_val);
+	if (ret)
+		return ret;
+
+	fault = BF_GET(reg_val, BQ2416X_REG_STATUS_FAULT_MASK);
+
+	if (fault && (fault != bq2416x->fault_reg)) {
+		if (klog_en)
+			dev_warn(bq2416x->dev, "%s",
+					bq2416x_charge_fault[fault].str);
+		bq2416x->fault_reg = fault;
+	}
+	return 0;
+}
+
+/*
+ * USB current detection, only available for bq24160/0A/3.
+ * No effect on other chips.
+ */
+static int bq2416x_current_detection(struct bq2416x_priv *bq2416x)
+{
+	int ret;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_BAT_VOLT,
+			BQ2416X_REG_BAT_VOLT_USB_DETECT_MASK,
+			BQ2416X_REG_BAT_VOLT_USB_DETECT_MASK);
+	dev_dbg(bq2416x->dev, "Current detection");
+	return ret;
+}
+
+static int bq2416x_reset_watchdog_tmr(struct bq2416x_priv *bq2416x)
+{
+	int ret;
+
+	/* update of watchdog bit would clear fault bits */
+	bq2416x_check_fault(bq2416x, 1);
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_STATUS,
+			BQ2416X_REG_STATUS_TMR_RST_MASK,
+			BQ2416X_REG_STATUS_TMR_RST_MASK);
+	if (unlikely(ret))
+		dev_err(bq2416x->dev, "Can't reset watchdog timer\n");
+
+	return ret;
+}
+
+/*
+ * Check and returns last detected fault and reset fault state.
+ * (No additional IRQ gets triggered in case of a persistent fault).
+ * State 'good' only is returned if no fault occurred since last call.
+ */
+static int bq2416x_get_health(struct bq2416x_priv *bq2416x, int *health)
+{
+	bq2416x_check_fault(bq2416x, 0);
+	*health = bq2416x_charge_fault[bq2416x->fault_reg].id;
+	bq2416x->fault_reg = 0;
+	return 0;
+}
+
+static int bq2416x_configure(struct bq2416x_priv *bq2416x)
+{
+	struct bq2416x_initdata *idata = &bq2416x->idata;
+	int ret;
+	unsigned int mask, bits;
+
+	ret = bq2416x_reset_watchdog_tmr(bq2416x);
+	if (unlikely(ret))
+		return ret;
+
+	/* sequence of register writes important for nobat operation */
+	mask =  BQ2416X_REG_CONTROL_RESET_MASK |
+			BQ2416X_REG_CONTROL_EN_STAT_MASK |
+			BQ2416X_REG_CONTROL_CE_MASK;
+
+	bits =  BF_SHIFT(idata->stat_pin_en,
+			BQ2416X_REG_CONTROL_EN_STAT_MASK) |
+			BF_SHIFT(idata->nobat_mode,
+			BQ2416X_REG_CONTROL_CE_MASK);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_CONTROL,
+			mask,
+			bits);
+	if (unlikely(ret))
+		return ret;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_CONTROL,
+			BQ2416X_REG_CONTROL_RESET_MASK |
+			BQ2416X_REG_CONTROL_TE_MASK,
+			BF_SHIFT(idata->curr_term_en,
+				BQ2416X_REG_CONTROL_TE_MASK));
+	if (unlikely(ret))
+		return ret;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_SUP_STATUS,
+			BQ2416X_REG_SUP_STATUS_EN_NOBATOP_MASK,
+			BF_SHIFT(idata->nobat_mode,
+				BQ2416X_REG_SUP_STATUS_EN_NOBATOP_MASK));
+	if (unlikely(ret))
+		return ret;
+
+	ret = bq2416x_set_charge_voltage(bq2416x, idata->charge_voltage);
+	if (unlikely(ret))
+		return ret;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_BAT_VOLT,
+			BQ2416X_REG_BAT_VOLT_IN_CURR_LIM_MASK,
+			BF_SHIFT(idata->in_curr_limit,
+				BQ2416X_REG_BAT_VOLT_IN_CURR_LIM_MASK));
+	if (unlikely(ret))
+		return ret;
+
+	if (idata->usb_curr_limit != USB_CURR_LIM_AUTO) {
+		ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_CONTROL, BQ2416X_REG_CONTROL_RESET_MASK |
+			BQ2416X_REG_CONTROL_USB_CURR_LIM_MASK,
+			BF_SHIFT(idata->usb_curr_limit,
+				BQ2416X_REG_CONTROL_USB_CURR_LIM_MASK));
+		if (unlikely(ret))
+			return ret;
+	}
+
+	ret = bq2416x_set_charge_current(bq2416x, idata->charge_current);
+	if (unlikely(ret))
+		return ret;
+
+	ret = bq2416x_set_term_current(bq2416x, idata->term_current);
+	if (unlikely(ret))
+		return ret;
+
+	ret = bq2416x_set_usb_dpm_voltage(bq2416x, idata->usb_dpm_voltage);
+	if (unlikely(ret))
+		return ret;
+
+	ret = bq2416x_set_in_dpm_voltage(bq2416x, idata->in_dpm_voltage);
+	if (unlikely(ret))
+		return ret;
+
+	mask = BQ2416X_REG_NTC_TMR_MASK | BQ2416X_REG_NTC_TS_EN_MASK;
+	bits = BF_SHIFT(idata->safety_timer, BQ2416X_REG_NTC_TMR_MASK);
+
+	/* disable battery temp monitor, if no battery defined */
+	if (!idata->nobat_mode)
+		bits |= BQ2416X_REG_NTC_TS_EN_MASK;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_NTC, mask, bits);
+
+	return ret;
+}
+
+/*
+ * Status pin interrupt handler. It sends uevent upon charger status change
+ */
+static irqreturn_t bq2416x_thread_irq(int irq, void *priv)
+{
+	struct bq2416x_priv *bq2416x = priv;
+
+	dev_dbg(bq2416x->dev, "IRQ");
+	bq2416x_check_fault(bq2416x, 1);
+	if (bq2416x->idata.usb_curr_limit == -EINVAL)
+		bq2416x_current_detection(bq2416x);
+
+	/* Give registers some time */
+	msleep(300);
+
+	power_supply_changed(bq2416x->psy);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Worker for watchdog timer reset.
+ */
+static void bq2416x_watchdog_work(struct work_struct *work)
+{
+	struct bq2416x_priv *bq2416x = container_of(work, struct bq2416x_priv,
+						 watchdog.work);
+
+	pm_runtime_get_sync(bq2416x->dev);
+	bq2416x_reset_watchdog_tmr(bq2416x);
+	pm_runtime_put_sync(bq2416x->dev);
+
+	schedule_delayed_work(&bq2416x->watchdog, BQ2416X_WATCHDOG_TIMER * HZ);
+}
+
+/* power-supply class property callbacks */
+
+static int bq2416x_psy_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	pm_runtime_get_sync(bq2416x->dev);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq2416x_get_status(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq2416x->model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = "Texas Instruments";
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = bq2416x_get_bat_present(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq2416x_get_charge_type(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq2416x_get_health(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq2416x_get_online(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq2416x_get_charge_current(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = BQ2416X_CHARGE_CURRENT_MAX;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq2416x_get_charge_voltage(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = BQ2416X_CHARGE_VOLTAGE_MAX;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq2416x_get_term_current(bq2416x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pm_runtime_put_sync(bq2416x->dev);
+	return ret;
+}
+
+static int bq2416x_psy_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+
+	pm_runtime_get_sync(bq2416x->dev);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq2416x_set_status(bq2416x, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq2416x_set_charge_type(bq2416x, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq2416x_set_charge_current(bq2416x, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq2416x_set_charge_voltage(bq2416x, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq2416x_set_term_current(bq2416x, val->intval);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_put_sync(bq2416x->dev);
+	return ret;
+}
+
+/* device attributes callbacks */
+
+
+static ssize_t supply_sel_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int val;
+	const char *str;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_STATUS, &val);
+	if (unlikely(ret != 0))
+		return ret;
+	if (val & BQ2416X_REG_STATUS_SUPPLY_SEL_MASK)
+		str = "usb";
+	else
+		str = "in";
+
+	return sprintf(buf, "%s\n", str);
+}
+
+static ssize_t supply_sel_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+
+	if (strncmp(buf, "usb", 3) == 0)
+		ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_STATUS,
+			BQ2416X_REG_STATUS_SUPPLY_SEL_MASK,
+			BQ2416X_REG_STATUS_SUPPLY_SEL_MASK);
+	else if (strncmp(buf, "in", 2) == 0)
+		ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_STATUS,
+			BQ2416X_REG_STATUS_SUPPLY_SEL_MASK,
+			0);
+	else
+		ret = -EINVAL;
+
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t supply_status_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int val;
+	const char *str;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_SUP_STATUS, &val);
+	if (unlikely(ret != 0))
+		return ret;
+
+	if (strcmp(attr->attr.name, "in_status") == 0) {
+		val = BF_GET(val, BQ2416X_REG_SUP_STATUS_INSTAT_MASK);
+		str = bq2416x_in_status[val];
+	} else if (strcmp(attr->attr.name, "usb_status") == 0) {
+		val = BF_GET(val, BQ2416X_REG_SUP_STATUS_USBSTAT_MASK);
+		str = bq2416x_in_status[val];
+	} else
+		return -EINVAL;
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", str);
+}
+
+static ssize_t in_current_limit_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int limit;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_BAT_VOLT, &limit);
+	if (unlikely(ret))
+		return ret;
+
+	limit = BF_GET(limit, BQ2416X_REG_BAT_VOLT_IN_CURR_LIM_MASK);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", bq24160_in_lim[limit]);
+
+}
+
+static ssize_t in_current_limit_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int reg_bits, limit;
+
+	ret = kstrtouint(buf, 0, &limit);
+	if (unlikely(ret))
+		return -EINVAL;
+
+	if (limit < 2500000)
+		reg_bits = BQ2416X_IN_CURR_LIM_1500;
+	else
+		reg_bits = BQ2416X_IN_CURR_LIM_2500;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+				BQ2416X_REG_BAT_VOLT,
+				BQ2416X_REG_BAT_VOLT_IN_CURR_LIM_MASK,
+				BF_SHIFT(reg_bits,
+				BQ2416X_REG_BAT_VOLT_IN_CURR_LIM_MASK));
+	if (unlikely(ret))
+		return ret;
+
+	return count;
+}
+
+static ssize_t usb_current_limit_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int limit;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_CONTROL, &limit);
+	if (unlikely(ret != 0))
+		return ret;
+
+	limit = BF_GET(limit, BQ2416X_REG_CONTROL_USB_CURR_LIM_MASK);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", bq2416x_usb_curr_lim[limit]);
+}
+
+static ssize_t usb_current_limit_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int curr, reg_bits;
+
+	ret = kstrtouint(buf, 0, &curr);
+	if (unlikely(ret))
+		return -EINVAL;
+
+	reg_bits = bq2416x_find_idx(bq2416x_usb_curr_lim,
+				ARRAY_SIZE(bq2416x_usb_curr_lim), curr);
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			BQ2416X_REG_CONTROL, BQ2416X_REG_CONTROL_RESET_MASK |
+			BQ2416X_REG_CONTROL_USB_CURR_LIM_MASK,
+			BF_SHIFT(reg_bits,
+			BQ2416X_REG_CONTROL_USB_CURR_LIM_MASK));
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t dpm_voltage_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int reg_val, dpm_volt;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_DPM, &reg_val);
+	if (unlikely(ret != 0))
+		return ret;
+
+	if (strcmp(attr->attr.name, "usb_dpm_voltage") == 0)
+		dpm_volt = BF_GET(reg_val, BQ2416X_REG_DPM_USB_VOLT_MASK);
+	else if (strcmp(attr->attr.name, "in_dpm_voltage") == 0)
+		dpm_volt = BF_GET(reg_val, BQ2416X_REG_DPM_IN_VOLT_MASK);
+	else
+		return -EINVAL;
+
+	dpm_volt = dpm_volt * BQ2416X_DPM_IN_VOLTAGE_STEP +
+		   BQ2416X_DPM_IN_VOLTAGE_MIN;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", dpm_volt);
+}
+
+static ssize_t dpm_voltage_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int dpm_volt;
+
+	ret = kstrtouint(buf, 0, &dpm_volt);
+	if (unlikely(ret))
+		return -EINVAL;
+
+	if (strcmp(attr->attr.name, "usb_dpm_voltage") == 0)
+		ret = bq2416x_set_usb_dpm_voltage(bq2416x, dpm_volt);
+	else if (strcmp(attr->attr.name, "in_dpm_voltage") == 0)
+		ret = bq2416x_set_in_dpm_voltage(bq2416x, dpm_volt);
+	else
+		ret =  -EINVAL;
+
+	if (ret)
+		return ret;
+
+	return count;
+
+}
+
+static ssize_t ts_fault_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int val;
+	const char *str;
+
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_NTC, &val);
+	if (unlikely(ret != 0))
+		return ret;
+
+	val = BF_GET(val, BQ2416X_REG_NTC_TS_FAULT_MASK);
+	str = bq2416x_ts_fault[val];
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", str);
+}
+
+static ssize_t sysfs_bit_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int ret;
+	unsigned int reg_val;
+	unsigned int reg = sattr->nr, mask = sattr->index;
+
+	ret = regmap_read(bq2416x->regmap, reg, &reg_val);
+	if (unlikely(ret != 0))
+		return ret;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", !!(reg_val & mask));
+}
+
+static ssize_t sysfs_bit_store(struct device *dev,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2416x_priv *bq2416x = power_supply_get_drvdata(psy);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int ret;
+	unsigned int bits;
+	unsigned int reg = sattr->nr, mask = sattr->index;
+
+	if (strncmp(buf, "1", 1) == 0)
+		bits = mask;
+	else if (strncmp(buf, "0", 1) == 0)
+		bits = 0;
+	else
+		return -EINVAL;
+
+	/* clear reset bit before writeback */
+	if (reg == BQ2416X_REG_CONTROL)
+		mask |= BQ2416X_REG_CONTROL_RESET_MASK;
+
+	ret = regmap_update_bits(bq2416x->regmap,
+			reg,
+			mask,
+			bits);
+	if (unlikely(ret))
+		return ret;
+
+	return count;
+}
+
+#define BIT_DEVICE_ATTR(_name, _mode, _reg, _bit)			\
+	SENSOR_DEVICE_ATTR_2(_name, _mode, sysfs_bit_show,	\
+	sysfs_bit_store, _reg, _bit)
+
+static DEVICE_ATTR_RW(supply_sel);
+static DEVICE_ATTR(in_status, 0444,
+			supply_status_show, NULL);
+static DEVICE_ATTR(usb_status, 0444,
+			supply_status_show, NULL);
+static DEVICE_ATTR_RW(in_current_limit);
+static DEVICE_ATTR_RW(usb_current_limit);
+static BIT_DEVICE_ATTR(high_impedance_enable, 0644,
+			BQ2416X_REG_CONTROL,
+			BQ2416X_REG_CONTROL_HZ_MODE_MASK);
+static BIT_DEVICE_ATTR(dpm_status, 0444,
+			BQ2416X_REG_DPM,
+			BQ2416X_REG_DPM_STATUS_MASK);
+static DEVICE_ATTR(usb_dpm_voltage, 0644,
+			dpm_voltage_show,
+			dpm_voltage_store);
+static DEVICE_ATTR(in_dpm_voltage, 0644,
+			dpm_voltage_show,
+			dpm_voltage_store);
+static DEVICE_ATTR_RO(ts_fault);
+
+static struct attribute *bq2416x_sysfs_attributes[] = {
+	&dev_attr_supply_sel.attr,
+	&dev_attr_in_status.attr,
+	&dev_attr_usb_status.attr,
+	&dev_attr_in_current_limit.attr,
+	&dev_attr_usb_current_limit.attr,
+	&sensor_dev_attr_high_impedance_enable.dev_attr.attr,
+	&sensor_dev_attr_dpm_status.dev_attr.attr,
+	&dev_attr_usb_dpm_voltage.attr,
+	&dev_attr_in_dpm_voltage.attr,
+	&dev_attr_ts_fault.attr,
+	NULL,
+};
+
+static const struct attribute_group bq2416x_sysfs_attr_group = {
+	.attrs = bq2416x_sysfs_attributes,
+};
+
+static const struct of_device_id bq2416x_of_match[] = {
+	{ .compatible = "ti,bq24160" },
+	{ .compatible = "ti,bq24160a" },
+	{ .compatible = "ti,bq24161" },
+	{ .compatible = "ti,bq24161b" },
+	{ .compatible = "ti,bq24163" },
+	{ .compatible = "ti,bq24168" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq2416x_of_match);
+
+static char *bq2416x_charger_supplied_to[] = {
+	"main-battery",
+};
+
+/*
+ * If battery present set charging options
+ * otherwise stay in no battery modus
+ * (ce = off, curr_term = off, nobat_op = 1)
+ */
+static void bq2416x_idata_from_of(struct bq2416x_priv *bq2416x)
+{
+	struct bq2416x_initdata *idata = &bq2416x->idata;
+	struct power_supply_battery_info info = {};
+	int ret, v;
+	unsigned int prop;
+
+	*idata = initdefault;
+
+	if (!power_supply_get_battery_info(bq2416x->psy, &info)) {
+		idata->nobat_mode = 0;
+		v = info.charge_term_current_ua;
+		if (v  != -EINVAL) {
+			idata->term_current = v;
+			idata->curr_term_en = 1;
+		}
+
+		v = info.constant_charge_current_max_ua;
+		idata->charge_current = v;
+
+		v = info.constant_charge_voltage_max_uv;
+		idata->charge_voltage = v;
+	}
+
+	ret = device_property_read_u32(bq2416x->dev,
+				"ti,in-current-limit-microamp", &prop);
+	if (!ret && prop >= 2500000)
+		idata->in_curr_limit = BQ2416X_IN_CURR_LIM_2500;
+
+	ret = device_property_read_u32(bq2416x->dev,
+				"ti,usb-current-limit-microamp", &prop);
+	if (!ret)
+		idata->usb_curr_limit = bq2416x_find_idx(bq2416x_usb_curr_lim,
+					ARRAY_SIZE(bq2416x_usb_curr_lim), prop);
+
+	ret = device_property_read_u32(bq2416x->dev,
+				"ti,usb-dpm-voltage-microvolt", &prop);
+	if (!ret)
+		idata->usb_dpm_voltage = prop;
+
+	ret = device_property_read_u32(bq2416x->dev,
+				"ti,in-dpm-voltage-microvolt", &prop);
+	if (!ret)
+		idata->in_dpm_voltage = prop;
+}
+
+/* power management op */
+
+static int __maybe_unused bq2416x_suspend(struct device *dev)
+{
+	struct bq2416x_priv *bq2416x = dev_get_drvdata(dev);
+
+	cancel_delayed_work(&bq2416x->watchdog);
+
+	pm_runtime_get_sync(bq2416x->dev);
+	bq2416x_set_charge_type(bq2416x, POWER_SUPPLY_CHARGE_TYPE_NONE);
+	pm_runtime_put_sync(bq2416x->dev);
+
+	return 0;
+}
+
+static int __maybe_unused bq2416x_resume(struct device *dev)
+{
+	struct bq2416x_priv *bq2416x = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(bq2416x->dev);
+	bq2416x_reset_watchdog_tmr(bq2416x);
+	bq2416x_configure(bq2416x);
+	pm_runtime_put_sync(bq2416x->dev);
+
+	schedule_delayed_work(&bq2416x->watchdog, BQ2416X_WATCHDOG_TIMER * HZ);
+
+	power_supply_changed(bq2416x->psy);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(bq2416x_pm_ops, bq2416x_suspend, bq2416x_resume);
+
+static int bq2416x_device_init(struct bq2416x_priv *bq2416x)
+{
+	int ret;
+	unsigned int vendor_reg, vendor_code, revision;
+	struct power_supply_config psy_cfg = { .drv_data = bq2416x };
+
+	dev_set_drvdata(bq2416x->dev, bq2416x);
+
+	pm_runtime_get_sync(bq2416x->dev);
+	ret = regmap_read(bq2416x->regmap, BQ2416X_REG_VENDOR, &vendor_reg);
+	if (unlikely(ret)) {
+		dev_err(bq2416x->dev, "Can't read vendor code\n");
+		return ret;
+	}
+	pm_runtime_put_sync(bq2416x->dev);
+
+	vendor_code = BF_GET(vendor_reg, BQ2416X_REG_VENDOR_CODE_MASK);
+	revision = BF_GET(vendor_reg, BQ2416X_REG_VENDOR_REV_MASK);
+
+	dev_info(bq2416x->dev, "Found BQ2416X, code: 0x%02x rev: %s\n",
+			vendor_code, bq2416x_revision[revision]);
+
+	bq2416x->psy_desc.name = bq2416x->name;
+	bq2416x->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	bq2416x->psy_desc.properties = bq2416x_power_supply_props;
+	bq2416x->psy_desc.get_property = bq2416x_psy_get_property;
+	bq2416x->psy_desc.set_property = bq2416x_psy_set_property;
+	bq2416x->psy_desc.num_properties =
+					ARRAY_SIZE(bq2416x_power_supply_props);
+	psy_cfg.of_node = bq2416x->dev->of_node;
+	psy_cfg.supplied_to = bq2416x_charger_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(bq2416x_charger_supplied_to);
+	bq2416x->psy_desc.property_is_writeable = bq2416x_property_is_writeable;
+
+	bq2416x->psy = power_supply_register(bq2416x->dev, &bq2416x->psy_desc,
+						&psy_cfg);
+	if (unlikely(IS_ERR(bq2416x->psy))) {
+		dev_err(bq2416x->dev, "Can't register power supply\n");
+		return PTR_ERR(bq2416x->psy);
+	}
+
+	if (bq2416x->dev->of_node)
+		bq2416x_idata_from_of(bq2416x);
+	return ret;
+}
+
+int bq2416x_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent);
+	struct bq2416x_priv *bq2416x;
+	int ret, idr;
+	char *model, *name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&i2c->dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	/* Get id for the new charger device */
+	mutex_lock(&bq2416x_idr_mutex);
+	idr = idr_alloc(&bq2416x_idr, i2c, 0, 0, GFP_KERNEL);
+	mutex_unlock(&bq2416x_idr_mutex);
+
+	if (IS_ERR_VALUE((unsigned long) idr))
+		return idr;
+
+	model = devm_kzalloc(&i2c->dev, strlen(id->name), GFP_KERNEL);
+	if (unlikely(!model)) {
+		dev_err(&i2c->dev, "Failed to allocate name\n");
+		ret = -ENOMEM;
+		goto err_rel_id;
+	}
+	strncpy(model, id->name, strlen(id->name));
+
+	bq2416x = devm_kzalloc(&i2c->dev, sizeof(*bq2416x), GFP_KERNEL);
+	if (unlikely(!bq2416x)) {
+		dev_err(&i2c->dev, "Failed to allocate private data\n");
+		ret = -ENOMEM;
+		goto err_rel_id;
+	}
+
+	bq2416x->regmap = devm_regmap_init_i2c(i2c, &bq2416x_i2c_regmap);
+	if (IS_ERR(bq2416x->regmap)) {
+		ret = PTR_ERR(bq2416x->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		goto err_rel_id;
+	}
+
+	name = kasprintf(GFP_KERNEL, "%s-%d", id->name, idr);
+	if (unlikely(!name)) {
+		dev_err(&i2c->dev, "Failed to allocate device name\n");
+		ret = -ENOMEM;
+		goto err_rel_id;
+	}
+
+	pm_runtime_enable(&i2c->dev);
+	pm_runtime_resume(&i2c->dev);
+
+	bq2416x->dev  = &i2c->dev;
+	bq2416x->idr  = idr;
+	bq2416x->model = model;
+	bq2416x->name  = name;
+
+	ret = bq2416x_device_init(bq2416x);
+	if (ret)
+		goto err_free_name;
+
+	ret = bq2416x_configure(bq2416x);
+	if (unlikely(ret)) {
+		dev_err(bq2416x->dev, "Initial configuration failed\n");
+		goto err_unregister_psy;
+	}
+
+	ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+				bq2416x_thread_irq, IRQF_TRIGGER_RISING |
+				IRQF_ONESHOT, "bq2416xinterrupt", bq2416x);
+	if (ret) {
+		dev_err(&i2c->dev, "Can't request IRQ\n");
+		goto err_unregister_psy;
+	}
+
+	ret = sysfs_create_group(&bq2416x->psy->dev.kobj,
+			&bq2416x_sysfs_attr_group);
+	if (unlikely(ret)) {
+		dev_err(bq2416x->dev, "Can't create sysfs entries\n");
+		goto err_unregister_psy;
+	}
+
+	INIT_DELAYED_WORK(&bq2416x->watchdog, bq2416x_watchdog_work);
+	schedule_delayed_work(&bq2416x->watchdog, BQ2416X_WATCHDOG_TIMER * HZ);
+
+	return 0;
+
+err_unregister_psy:
+	power_supply_unregister(bq2416x->psy);
+err_free_name:
+	pm_runtime_disable(&i2c->dev);
+	kfree(name);
+err_rel_id:
+	mutex_lock(&bq2416x_idr_mutex);
+	idr_remove(&bq2416x_idr, idr);
+	mutex_unlock(&bq2416x_idr_mutex);
+
+	return ret;
+}
+
+static int bq2416x_i2c_remove(struct i2c_client *i2c)
+{
+	struct bq2416x_priv *bq2416x = i2c_get_clientdata(i2c);
+
+	cancel_delayed_work_sync(&bq2416x->watchdog);
+	sysfs_remove_group(&bq2416x->psy->dev.kobj, &bq2416x_sysfs_attr_group);
+	power_supply_unregister(bq2416x->psy);
+	pm_runtime_disable(bq2416x->dev);
+
+	mutex_lock(&bq2416x_idr_mutex);
+	idr_remove(&bq2416x_idr, bq2416x->idr);
+	mutex_unlock(&bq2416x_idr_mutex);
+
+	kfree(bq2416x->name);
+
+	return 0;
+}
+
+static const struct i2c_device_id  bq2416x_i2c_id[] = {
+	{ "bq24160",  BQ24160 },
+	{ "bq24160a", BQ24160A },
+	{ "bq24161",  BQ24161 },
+	{ "bq24161b", BQ24161B },
+	{ "bq24163",  BQ24163 },
+	{ "bq24168",  BQ24168 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bq2416x_i2c_id);
+
+static struct i2c_driver bq2416x_i2c_driver = {
+	.driver = {
+		.name	= "bq2416x-charger",
+		.of_match_table = of_match_ptr(bq2416x_of_match),
+		.pm     = &bq2416x_pm_ops,
+	},
+	.probe		= bq2416x_i2c_probe,
+	.remove		= bq2416x_i2c_remove,
+	.id_table	= bq2416x_i2c_id,
+};
+
+module_i2c_driver(bq2416x_i2c_driver);
+
+MODULE_DESCRIPTION("TI BQ2416x battery charger driver");
+MODULE_AUTHOR("Karsten Mueller <mueller.k@efe-gmbh.de>");
+MODULE_LICENSE("GPL");
-- 
2.17.1

[PATCH 2/3] dt-bindings: power: supply: bq2416x driver

[Karsten Mueller]

Signed-off-by: Karsten Mueller <mueller.k@efe-gmbh.de>
---
 .../bindings/power/supply/bq2416x.txt         | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/bq2416x.txt

diff --git a/Documentation/devicetree/bindings/power/supply/bq2416x.txt b/Documentation/devicetree/bindings/power/supply/bq2416x.txt
new file mode 100644
index 000000000..742d41642
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2416x.txt
@@ -0,0 +1,75 @@
+Binding for TI bq2416x Li-Ion Charger
+
+Required properties:
+====================
+- compatible: one of the following:
+ * "ti,bq24160"
+ * "ti,bq24160a"
+ * "ti,bq24161"
+ * "ti,bq24161b"
+ * "ti,bq24163"
+ * "ti,bq24168"
+
+- reg:			I2C address of the device.
+- interrupt-parent:	The IRQ controller (phandle) connected to the INT pin of
+			the bq2416x
+- interrupts:		The IRQ number assigned for INT pin.
+
+Optional properties:
+====================
+
+- ti,in-current-limit-microamp:	IN source current limit.
+	Possible values: 1500000 (default), 2500000
+
+- ti,usb-current-limit-microamp: USB source current limit.
+	If not specified, auto detection of USB (D+/D- based) is used (for
+	BQ24160/0A/3 only) or settings of default mode are kept (BQ24161/1B/8).
+	Both pre-select only 100 mA or 1500 mA (refer to datasheet).
+	Possible values: 100000, 150000, 500000, 800000, 90000, 1500000
+
+- ti,usb-dpm-voltage-microvolt:	USB threshold for dynamic power path management.
+	Configures the threshold input voltage (usb input) for the dynamic power
+	path management. If not specified a default of 4,200,000 (= 4.2V) is
+	used.
+
+- ti,in-dpm-voltage-microvolt: IN threshold for dynamic power path management.
+	Configures the threshold input voltage (in input) for the dynamic power
+	path management. If not specified a default of 4,200,000 (= 4.2V) is
+	used.
+
+- monitored-battery: phandle of battery information devicetree node
+	If not specified, no battery is assumed (charge disable, nobat operation
+	mode, no NTC check of battery), Vsys output voltage is set to 4.2V. The
+	charger uses the following battery properties:
+	+ constant_charge_current_max_microamp: maximum current in fast charge
+	  mode
+	+ constant_charge_voltage_max_microvolt: maximum constant charging
+	  voltage / output voltage (refer to datasheet)
+	+ charge-term-current-microamp: a charge cycle terminates when the
+	  battery voltage is above recharge threshold, and the current is below
+	  this setting (typically 10% of battery capacity). If not specified,
+	  termination of current detection is disabled (refer to datasheet).
+
+Example:
+========
+
+bat: battery {
+		compatible = "simple-battery";
+		charge-term-current-microamp = <128000>;
+		constant-charge-current-max-microamp = <900000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+	};
+
+bq24160@6b {
+	compatible = "ti,bq24160";
+	reg = <0x6b>;
+
+	interrupt-parent = <&gpio5>;
+	interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+
+	monitored-battery = <&bat>;
+	ti,in-current-limit-microamp = <1500000>;
+	ti,usb-current-limit-microamp = <500000>;
+	ti,usb-dpm-voltage-microvolt = <4300000>;
+	ti,in-dpm-voltage-microvolt = <4300000>;
+};
-- 
2.17.1

[PATCH 3/3] Add sysfs ABI for bq2416x

[Karsten Mueller]

Signed-off-by: Karsten Mueller <mueller.k@efe-gmbh.de>
---
 Documentation/ABI/testing/sysfs-class-power | 118 ++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 5e23e22dc..3881485ca 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -587,3 +587,121 @@ Description:
 		Valid values:
 		- 1: enabled
 		- 0: disabled
+
+What:		/sys/class/power_supply/bq2416x-charger/usb_curr_limit
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		Reports and sets the maximum current the "usb" supply can
+		support.
+
+		Access: Read, Write
+		Valid values:
+		- 100000, 150000, 500000, 800000, 900000, 1500000 (uA)
+
+What:		/sys/class/power_supply/bq2416x-charger/in_curr_limit
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		Reports and sets the maximum current the "in" (wall) supply can
+		support.
+
+		Access: Read, Write
+		Valid values:
+		- 1500000, 2500000 (uA)
+
+What:		/sys/class/power_supply/bq2416x-charger/in_dpm_voltage
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		This entry configures the "in" (wall) input dynamic power path
+		management voltage of bq2416x-type charger devices. Once the
+		supply drops to the configured voltage, the input current limit
+		is reduced down to prevent the further drop of the supply. When
+		the IC enters this mode, the charge current is lower than the
+		set value.
+
+		Access: Read, Write
+		Valid values:
+		- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+		  4760000 (all uV)
+
+What:		/sys/class/power_supply/bq2416x-charger/usb_dpm_voltage
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		This entry configures the "usb" input dynamic power path
+		management voltage of bq2416x-type charger devices. Once the
+		supply drops to the configured voltage, the input current limit
+		is reduced down to prevent the further drop of the supply. When
+		the IC enters this mode, the charge current is lower than the
+		set value.
+
+		Access: Read, Write
+		Valid values:
+		- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+		  4760000 (all uV)
+
+What:		/sys/class/power_supply/bq2416x-charger/high_impedance_enable
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		This entry allows enabling the high-impedance mode of
+		bq2416x-type charger devices. If enabled, it places the charger
+		IC into low power standby mode with the switch mode controller
+		disabled. When disabled, the charger operates normally.
+
+		Access: Read, Write
+		Valid values:
+		- 1: enabled
+		- 0: disabled
+
+What:		/sys/class/power_supply/bq2416x-charger/dpm_status
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		Reports whether dynamic power management is active, i.e. input
+		current of used source is limited to prevent further drop of
+		voltage.
+
+		Valid values:
+		- 0: not active
+		- 1: active
+
+What:		/sys/class/power_supply/bq2416x-charger/supply_sel
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		This entry configures which input ("in", "usb") should be
+		preferred as input source.
+
+		Valid values:
+		- "in", "usb"
+
+What:		/sys/class/power_supply/bq2416x-charger/ts_fault
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		Reports state of NTC temperature monitor.
+
+		Valid values:
+		- "normal", "cold/hot(charge suspended)",
+		  "cool(half current charge)", "warm(voltage reduced)"
+
+What:		/sys/class/power_supply/bq2416x-charger/in_status
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		Reports state of "in" input source.
+
+		Valid values:
+		- "Normal", "OVP", "Weak source", "Faulty Adapter"
+
+What:		/sys/class/power_supply/bq2416x-charger/usb_status
+Date:		September 2018
+Contact:	Karsten Mueller <mueller.k@efe-gmbh.de>
+Description:
+		Reports state of "usb" input source.
+
+		Valid values:
+		- "Normal", "OVP", "Weak source", "Faulty Adapter"
-- 
2.17.1