* [PATCH] iio: magnetometer: hmc5843: Replace a return value.
@ 2018-09-20 13:42 Song Qiang
2018-09-22 9:28 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Song Qiang @ 2018-09-20 13:42 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, shubhrajyoti
Cc: linux-iio, linux-kernel, Song Qiang
This error apparently is caused by timed out event, so a -ETIMEDOUT
should be used instead of a -EIO, and it also tells user what happened
, so this dev_err may not be needed anymore.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
---
I used ./scripts/get_maintainer.pl to get maintainers about this file,
I thought this script searches maintainers with looking up MAINTAINER,
is that right?
So I searched MAINTAINER and also found nothing related to hmc5843.
In the declearation area I can see Shubhrajyoti Datta
<shubhrajyoti@ti.com> wroted this driver and several other people
including Peter Meerwald have contributed. Is this driver now a orphan?
Or if it is, I think we may also need to add it to the MAINTAINER file.
I'm also familiar with this device, I think I can add interrupt support
later.
drivers/iio/magnetometer/hmc5843_core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c
index ada142fb7aa3..4fb393c3854c 100644
--- a/drivers/iio/magnetometer/hmc5843_core.c
+++ b/drivers/iio/magnetometer/hmc5843_core.c
@@ -170,8 +170,7 @@ static int hmc5843_wait_measurement(struct hmc5843_data *data)
}
if (tries < 0) {
- dev_err(data->dev, "data not ready\n");
- return -EIO;
+ return -ETIMEDOUT;
}
return 0;
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] iio: magnetometer: hmc5843: Replace a return value.
2018-09-20 13:42 [PATCH] iio: magnetometer: hmc5843: Replace a return value Song Qiang
@ 2018-09-22 9:28 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2018-09-22 9:28 UTC (permalink / raw)
To: Song Qiang; +Cc: knaack.h, lars, pmeerw, shubhrajyoti, linux-iio, linux-kernel
On Thu, 20 Sep 2018 21:42:19 +0800
Song Qiang <songqiang1304521@gmail.com> wrote:
> This error apparently is caused by timed out event, so a -ETIMEDOUT
> should be used instead of a -EIO, and it also tells user what happened
> , so this dev_err may not be needed anymore.
>
> Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
> ---
> I used ./scripts/get_maintainer.pl to get maintainers about this file,
> I thought this script searches maintainers with looking up MAINTAINER,
> is that right?
> So I searched MAINTAINER and also found nothing related to hmc5843.
> In the declearation area I can see Shubhrajyoti Datta
> <shubhrajyoti@ti.com> wroted this driver and several other people
> including Peter Meerwald have contributed. Is this driver now a orphan?
> Or if it is, I think we may also need to add it to the MAINTAINER file.
> I'm also familiar with this device, I think I can add interrupt support
> later.
Those drivers not covered by more explicit MAINTAINER entries are
picked up by the main IIO one. Of course if you are working in a
significant way with the driver and want to adopt it, then post
a patch adding a MAINTAINERS entry and see if any of the previous
significant contributors mind (or potentially want to co-maintain it).
>
> drivers/iio/magnetometer/hmc5843_core.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c
> index ada142fb7aa3..4fb393c3854c 100644
> --- a/drivers/iio/magnetometer/hmc5843_core.c
> +++ b/drivers/iio/magnetometer/hmc5843_core.c
> @@ -170,8 +170,7 @@ static int hmc5843_wait_measurement(struct hmc5843_data *data)
> }
>
> if (tries < 0) {
> - dev_err(data->dev, "data not ready\n");
> - return -EIO;
> + return -ETIMEDOUT;
I'd say no on this one as I suspect such a timeout only indicates a
communication problem, not some delay in the hardware managing to
return an answer..
It's certainly not a clear enough reason to my mind to argue for changing
the error code (which it is just possible some less than ideal userspace
code is relying on).
Jonathan
> }
>
> return 0;
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-09-22 9:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-20 13:42 [PATCH] iio: magnetometer: hmc5843: Replace a return value Song Qiang
2018-09-22 9:28 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).