* [PATCH v2 1/5] staging: vc04_services: Fix "space prohibited"
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
@ 2018-09-23 14:06 ` Aymen Qader
2018-09-23 14:06 ` [PATCH v2 2/5] staging: vc04_services: Use tabs instead of spaces Aymen Qader
` (5 subsequent siblings)
6 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-23 14:06 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: space prohibited after/before that open/closed parenthesis
in the interface/vchi directory.
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
.../vc04_services/interface/vchi/vchi.h | 106 +++++++++---------
.../vc04_services/interface/vchi/vchi_cfg.h | 2 +-
2 files changed, 54 insertions(+), 54 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index 66a3a060fad2..ffb8caaacaea 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -98,7 +98,7 @@ typedef struct vchi_msg_vector_ex {
#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
// Macros to manipulate 'FOURCC' values
-#define MAKE_FOURCC(x) ((int32_t)( (x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3] ))
+#define MAKE_FOURCC(x) ((int32_t)((x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3]))
#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF
// Opaque service information
@@ -154,25 +154,25 @@ typedef struct service_info_tag {
extern "C" {
#endif
-extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection( const VCHI_CONNECTION_API_T * function_table,
+extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
const VCHI_MESSAGE_DRIVER_T * low_level);
// Routine used to initialise the vchi on both local + remote connections
-extern int32_t vchi_initialise( VCHI_INSTANCE_T *instance_handle );
+extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
-extern int32_t vchi_exit( void );
+extern int32_t vchi_exit(void);
-extern int32_t vchi_connect( VCHI_CONNECTION_T **connections,
+extern int32_t vchi_connect(VCHI_CONNECTION_T **connections,
const uint32_t num_connections,
- VCHI_INSTANCE_T instance_handle );
+ VCHI_INSTANCE_T instance_handle);
//When this is called, ensure that all services have no data pending.
//Bulk transfers can remain 'queued'
-extern int32_t vchi_disconnect( VCHI_INSTANCE_T instance_handle );
+extern int32_t vchi_disconnect(VCHI_INSTANCE_T instance_handle);
// Global control over bulk CRC checking
-extern int32_t vchi_crc_control( VCHI_CONNECTION_T *connection,
- VCHI_CRC_CONTROL_T control );
+extern int32_t vchi_crc_control(VCHI_CONNECTION_T *connection,
+ VCHI_CRC_CONTROL_T control);
// helper functions
extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
@@ -183,32 +183,32 @@ extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
Global service API
*****************************************************************************/
// Routine to create a named service
-extern int32_t vchi_service_create( VCHI_INSTANCE_T instance_handle,
+extern int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
SERVICE_CREATION_T *setup,
- VCHI_SERVICE_HANDLE_T *handle );
+ VCHI_SERVICE_HANDLE_T *handle);
// Routine to destroy a service
-extern int32_t vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_destroy(const VCHI_SERVICE_HANDLE_T handle);
// Routine to open a named service
-extern int32_t vchi_service_open( VCHI_INSTANCE_T instance_handle,
+extern int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
SERVICE_CREATION_T *setup,
VCHI_SERVICE_HANDLE_T *handle);
-extern int32_t vchi_get_peer_version( const VCHI_SERVICE_HANDLE_T handle,
- short *peer_version );
+extern int32_t vchi_get_peer_version(const VCHI_SERVICE_HANDLE_T handle,
+ short *peer_version);
// Routine to close a named service
-extern int32_t vchi_service_close( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_close(const VCHI_SERVICE_HANDLE_T handle);
// Routine to increment ref count on a named service
-extern int32_t vchi_service_use( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_use(const VCHI_SERVICE_HANDLE_T handle);
// Routine to decrement ref count on a named service
-extern int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_release(const VCHI_SERVICE_HANDLE_T handle);
// Routine to set a control option for a named service
-extern int32_t vchi_service_set_option( const VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_service_set_option(const VCHI_SERVICE_HANDLE_T handle,
VCHI_SERVICE_OPTION_T option,
int value);
@@ -226,128 +226,128 @@ vchi_queue_user_message(VCHI_SERVICE_HANDLE_T handle,
// Routine to receive a msg from a service
// Dequeue is equivalent to hold, copy into client buffer, release
-extern int32_t vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_dequeue(VCHI_SERVICE_HANDLE_T handle,
void *data,
uint32_t max_data_size_to_read,
uint32_t *actual_msg_size,
- VCHI_FLAGS_T flags );
+ VCHI_FLAGS_T flags);
// Routine to look at a message in place.
// The message is not dequeued, so a subsequent call to peek or dequeue
// will return the same message.
-extern int32_t vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_peek(VCHI_SERVICE_HANDLE_T handle,
void **data,
uint32_t *msg_size,
- VCHI_FLAGS_T flags );
+ VCHI_FLAGS_T flags);
// Routine to remove a message after it has been read in place with peek
// The first message on the queue is dequeued.
-extern int32_t vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_msg_remove(VCHI_SERVICE_HANDLE_T handle);
// Routine to look at a message in place.
// The message is dequeued, so the caller is left holding it; the descriptor is
// filled in and must be released when the user has finished with the message.
-extern int32_t vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_hold(VCHI_SERVICE_HANDLE_T handle,
void **data, // } may be NULL, as info can be
uint32_t *msg_size, // } obtained from HELD_MSG_T
VCHI_FLAGS_T flags,
- VCHI_HELD_MSG_T *message_descriptor );
+ VCHI_HELD_MSG_T *message_descriptor);
// Initialise an iterator to look through messages in place
-extern int32_t vchi_msg_look_ahead( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_look_ahead(VCHI_SERVICE_HANDLE_T handle,
VCHI_MSG_ITER_T *iter,
- VCHI_FLAGS_T flags );
+ VCHI_FLAGS_T flags);
/******************************************************************************
Global service support API - operations on held messages and message iterators
*****************************************************************************/
// Routine to get the address of a held message
-extern void *vchi_held_msg_ptr( const VCHI_HELD_MSG_T *message );
+extern void *vchi_held_msg_ptr(const VCHI_HELD_MSG_T *message);
// Routine to get the size of a held message
-extern int32_t vchi_held_msg_size( const VCHI_HELD_MSG_T *message );
+extern int32_t vchi_held_msg_size(const VCHI_HELD_MSG_T *message);
// Routine to get the transmit timestamp as written into the header by the peer
-extern uint32_t vchi_held_msg_tx_timestamp( const VCHI_HELD_MSG_T *message );
+extern uint32_t vchi_held_msg_tx_timestamp(const VCHI_HELD_MSG_T *message);
// Routine to get the reception timestamp, written as we parsed the header
-extern uint32_t vchi_held_msg_rx_timestamp( const VCHI_HELD_MSG_T *message );
+extern uint32_t vchi_held_msg_rx_timestamp(const VCHI_HELD_MSG_T *message);
// Routine to release a held message after it has been processed
-extern int32_t vchi_held_msg_release( VCHI_HELD_MSG_T *message );
+extern int32_t vchi_held_msg_release(VCHI_HELD_MSG_T *message);
// Indicates whether the iterator has a next message.
-extern int32_t vchi_msg_iter_has_next( const VCHI_MSG_ITER_T *iter );
+extern int32_t vchi_msg_iter_has_next(const VCHI_MSG_ITER_T *iter);
// Return the pointer and length for the next message and advance the iterator.
-extern int32_t vchi_msg_iter_next( VCHI_MSG_ITER_T *iter,
+extern int32_t vchi_msg_iter_next(VCHI_MSG_ITER_T *iter,
void **data,
- uint32_t *msg_size );
+ uint32_t *msg_size);
// Remove the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
-extern int32_t vchi_msg_iter_remove( VCHI_MSG_ITER_T *iter );
+extern int32_t vchi_msg_iter_remove(VCHI_MSG_ITER_T *iter);
// Hold the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
-extern int32_t vchi_msg_iter_hold( VCHI_MSG_ITER_T *iter,
- VCHI_HELD_MSG_T *message );
+extern int32_t vchi_msg_iter_hold(VCHI_MSG_ITER_T *iter,
+ VCHI_HELD_MSG_T *message);
// Return information for the next message, and hold it, advancing the iterator.
-extern int32_t vchi_msg_iter_hold_next( VCHI_MSG_ITER_T *iter,
+extern int32_t vchi_msg_iter_hold_next(VCHI_MSG_ITER_T *iter,
void **data, // } may be NULL
uint32_t *msg_size, // }
- VCHI_HELD_MSG_T *message );
+ VCHI_HELD_MSG_T *message);
/******************************************************************************
Global bulk API
*****************************************************************************/
// Routine to prepare interface for a transfer from the other side
-extern int32_t vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_bulk_queue_receive(VCHI_SERVICE_HANDLE_T handle,
void *data_dst,
uint32_t data_size,
VCHI_FLAGS_T flags,
- void *transfer_handle );
+ void *transfer_handle);
// Prepare interface for a transfer from the other side into relocatable memory.
-int32_t vchi_bulk_queue_receive_reloc( const VCHI_SERVICE_HANDLE_T handle,
+int32_t vchi_bulk_queue_receive_reloc(const VCHI_SERVICE_HANDLE_T handle,
VCHI_MEM_HANDLE_T h_dst,
uint32_t offset,
uint32_t data_size,
const VCHI_FLAGS_T flags,
- void * const bulk_handle );
+ void * const bulk_handle);
// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
-extern int32_t vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_bulk_queue_transmit(VCHI_SERVICE_HANDLE_T handle,
const void *data_src,
uint32_t data_size,
VCHI_FLAGS_T flags,
- void *transfer_handle );
+ void *transfer_handle);
/******************************************************************************
Configuration plumbing
*****************************************************************************/
// function prototypes for the different mid layers (the state info gives the different physical connections)
-extern const VCHI_CONNECTION_API_T *single_get_func_table( void );
-//extern const VCHI_CONNECTION_API_T *local_server_get_func_table( void );
-//extern const VCHI_CONNECTION_API_T *local_client_get_func_table( void );
+extern const VCHI_CONNECTION_API_T *single_get_func_table(void);
+//extern const VCHI_CONNECTION_API_T *local_server_get_func_table(void);
+//extern const VCHI_CONNECTION_API_T *local_client_get_func_table(void);
// declare all message drivers here
-const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table( void );
+const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table(void);
#ifdef __cplusplus
}
#endif
-extern int32_t vchi_bulk_queue_transmit_reloc( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_bulk_queue_transmit_reloc(VCHI_SERVICE_HANDLE_T handle,
VCHI_MEM_HANDLE_T h_src,
uint32_t offset,
uint32_t data_size,
VCHI_FLAGS_T flags,
- void *transfer_handle );
+ void *transfer_handle);
#endif /* VCHI_H_ */
/****************************** End of file **********************************/
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h b/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h
index b6f42b86f206..0d3c468c3504 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h
@@ -138,7 +138,7 @@
* can guarantee this by enabling unaligned transmits).
* Not API. */
#ifndef VCHI_MIN_BULK_SIZE
-# define VCHI_MIN_BULK_SIZE ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 )
+# define VCHI_MIN_BULK_SIZE (VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096)
#endif
/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 2/5] staging: vc04_services: Use tabs instead of spaces
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
2018-09-23 14:06 ` [PATCH v2 1/5] staging: vc04_services: Fix "space prohibited" Aymen Qader
@ 2018-09-23 14:06 ` Aymen Qader
2018-09-23 14:06 ` [PATCH v2 3/5] staging: vc04_services: Add spaces after commas Aymen Qader
` (4 subsequent siblings)
6 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-23 14:06 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: code indent should use tabs where possible
in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
.../vc04_services/interface/vchi/vchi.h | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index ffb8caaacaea..cb2582a4eb6a 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -71,23 +71,23 @@ typedef struct vchi_msg_vector_ex {
VCHI_MSG_VECTOR_TYPE_T type;
union {
// a memory handle
- struct {
- VCHI_MEM_HANDLE_T handle;
- uint32_t offset;
- int32_t vec_len;
- } handle;
+ struct {
+ VCHI_MEM_HANDLE_T handle;
+ uint32_t offset;
+ int32_t vec_len;
+ } handle;
// an ordinary data pointer
- struct {
- const void *vec_base;
- int32_t vec_len;
+ struct {
+ const void *vec_base;
+ int32_t vec_len;
} ptr;
// a nested vector list
- struct {
- struct vchi_msg_vector_ex *vec;
- uint32_t vec_len;
- } list;
+ struct {
+ struct vchi_msg_vector_ex *vec;
+ uint32_t vec_len;
+ } list;
} u;
} VCHI_MSG_VECTOR_EX_T;
@@ -155,7 +155,7 @@ extern "C" {
#endif
extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
- const VCHI_MESSAGE_DRIVER_T * low_level);
+ const VCHI_MESSAGE_DRIVER_T * low_level);
// Routine used to initialise the vchi on both local + remote connections
extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
@@ -163,8 +163,8 @@ extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
extern int32_t vchi_exit(void);
extern int32_t vchi_connect(VCHI_CONNECTION_T **connections,
- const uint32_t num_connections,
- VCHI_INSTANCE_T instance_handle);
+ const uint32_t num_connections,
+ VCHI_INSTANCE_T instance_handle);
//When this is called, ensure that all services have no data pending.
//Bulk transfers can remain 'queued'
@@ -172,7 +172,7 @@ extern int32_t vchi_disconnect(VCHI_INSTANCE_T instance_handle);
// Global control over bulk CRC checking
extern int32_t vchi_crc_control(VCHI_CONNECTION_T *connection,
- VCHI_CRC_CONTROL_T control);
+ VCHI_CRC_CONTROL_T control);
// helper functions
extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
@@ -184,19 +184,19 @@ extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
*****************************************************************************/
// Routine to create a named service
extern int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
- SERVICE_CREATION_T *setup,
- VCHI_SERVICE_HANDLE_T *handle);
+ SERVICE_CREATION_T *setup,
+ VCHI_SERVICE_HANDLE_T *handle);
// Routine to destroy a service
extern int32_t vchi_service_destroy(const VCHI_SERVICE_HANDLE_T handle);
// Routine to open a named service
extern int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
- SERVICE_CREATION_T *setup,
- VCHI_SERVICE_HANDLE_T *handle);
+ SERVICE_CREATION_T *setup,
+ VCHI_SERVICE_HANDLE_T *handle);
extern int32_t vchi_get_peer_version(const VCHI_SERVICE_HANDLE_T handle,
- short *peer_version);
+ short *peer_version);
// Routine to close a named service
extern int32_t vchi_service_close(const VCHI_SERVICE_HANDLE_T handle);
@@ -227,18 +227,18 @@ vchi_queue_user_message(VCHI_SERVICE_HANDLE_T handle,
// Routine to receive a msg from a service
// Dequeue is equivalent to hold, copy into client buffer, release
extern int32_t vchi_msg_dequeue(VCHI_SERVICE_HANDLE_T handle,
- void *data,
- uint32_t max_data_size_to_read,
- uint32_t *actual_msg_size,
- VCHI_FLAGS_T flags);
+ void *data,
+ uint32_t max_data_size_to_read,
+ uint32_t *actual_msg_size,
+ VCHI_FLAGS_T flags);
// Routine to look at a message in place.
// The message is not dequeued, so a subsequent call to peek or dequeue
// will return the same message.
extern int32_t vchi_msg_peek(VCHI_SERVICE_HANDLE_T handle,
- void **data,
- uint32_t *msg_size,
- VCHI_FLAGS_T flags);
+ void **data,
+ uint32_t *msg_size,
+ VCHI_FLAGS_T flags);
// Routine to remove a message after it has been read in place with peek
// The first message on the queue is dequeued.
@@ -248,15 +248,15 @@ extern int32_t vchi_msg_remove(VCHI_SERVICE_HANDLE_T handle);
// The message is dequeued, so the caller is left holding it; the descriptor is
// filled in and must be released when the user has finished with the message.
extern int32_t vchi_msg_hold(VCHI_SERVICE_HANDLE_T handle,
- void **data, // } may be NULL, as info can be
- uint32_t *msg_size, // } obtained from HELD_MSG_T
- VCHI_FLAGS_T flags,
- VCHI_HELD_MSG_T *message_descriptor);
+ void **data, // } may be NULL, as info can be
+ uint32_t *msg_size, // } obtained from HELD_MSG_T
+ VCHI_FLAGS_T flags,
+ VCHI_HELD_MSG_T *message_descriptor);
// Initialise an iterator to look through messages in place
extern int32_t vchi_msg_look_ahead(VCHI_SERVICE_HANDLE_T handle,
- VCHI_MSG_ITER_T *iter,
- VCHI_FLAGS_T flags);
+ VCHI_MSG_ITER_T *iter,
+ VCHI_FLAGS_T flags);
/******************************************************************************
Global service support API - operations on held messages and message iterators
@@ -282,8 +282,8 @@ extern int32_t vchi_msg_iter_has_next(const VCHI_MSG_ITER_T *iter);
// Return the pointer and length for the next message and advance the iterator.
extern int32_t vchi_msg_iter_next(VCHI_MSG_ITER_T *iter,
- void **data,
- uint32_t *msg_size);
+ void **data,
+ uint32_t *msg_size);
// Remove the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
@@ -292,13 +292,13 @@ extern int32_t vchi_msg_iter_remove(VCHI_MSG_ITER_T *iter);
// Hold the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
extern int32_t vchi_msg_iter_hold(VCHI_MSG_ITER_T *iter,
- VCHI_HELD_MSG_T *message);
+ VCHI_HELD_MSG_T *message);
// Return information for the next message, and hold it, advancing the iterator.
extern int32_t vchi_msg_iter_hold_next(VCHI_MSG_ITER_T *iter,
- void **data, // } may be NULL
- uint32_t *msg_size, // }
- VCHI_HELD_MSG_T *message);
+ void **data, // } may be NULL
+ uint32_t *msg_size, // }
+ VCHI_HELD_MSG_T *message);
/******************************************************************************
Global bulk API
@@ -306,25 +306,25 @@ extern int32_t vchi_msg_iter_hold_next(VCHI_MSG_ITER_T *iter,
// Routine to prepare interface for a transfer from the other side
extern int32_t vchi_bulk_queue_receive(VCHI_SERVICE_HANDLE_T handle,
- void *data_dst,
- uint32_t data_size,
- VCHI_FLAGS_T flags,
- void *transfer_handle);
+ void *data_dst,
+ uint32_t data_size,
+ VCHI_FLAGS_T flags,
+ void *transfer_handle);
// Prepare interface for a transfer from the other side into relocatable memory.
int32_t vchi_bulk_queue_receive_reloc(const VCHI_SERVICE_HANDLE_T handle,
- VCHI_MEM_HANDLE_T h_dst,
- uint32_t offset,
- uint32_t data_size,
- const VCHI_FLAGS_T flags,
- void * const bulk_handle);
+ VCHI_MEM_HANDLE_T h_dst,
+ uint32_t offset,
+ uint32_t data_size,
+ const VCHI_FLAGS_T flags,
+ void * const bulk_handle);
// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
extern int32_t vchi_bulk_queue_transmit(VCHI_SERVICE_HANDLE_T handle,
- const void *data_src,
- uint32_t data_size,
- VCHI_FLAGS_T flags,
- void *transfer_handle);
+ const void *data_src,
+ uint32_t data_size,
+ VCHI_FLAGS_T flags,
+ void *transfer_handle);
/******************************************************************************
Configuration plumbing
@@ -343,11 +343,11 @@ const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table(void);
#endif
extern int32_t vchi_bulk_queue_transmit_reloc(VCHI_SERVICE_HANDLE_T handle,
- VCHI_MEM_HANDLE_T h_src,
- uint32_t offset,
- uint32_t data_size,
- VCHI_FLAGS_T flags,
- void *transfer_handle);
+ VCHI_MEM_HANDLE_T h_src,
+ uint32_t offset,
+ uint32_t data_size,
+ VCHI_FLAGS_T flags,
+ void *transfer_handle);
#endif /* VCHI_H_ */
/****************************** End of file **********************************/
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 3/5] staging: vc04_services: Add spaces after commas
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
2018-09-23 14:06 ` [PATCH v2 1/5] staging: vc04_services: Fix "space prohibited" Aymen Qader
2018-09-23 14:06 ` [PATCH v2 2/5] staging: vc04_services: Use tabs instead of spaces Aymen Qader
@ 2018-09-23 14:06 ` Aymen Qader
2018-09-23 14:06 ` [PATCH v2 4/5] staging: vc04_services: Surround complex macros Aymen Qader
` (3 subsequent siblings)
6 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-23 14:06 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: space required after that ','
in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
drivers/staging/vc04_services/interface/vchi/vchi.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index cb2582a4eb6a..d8e660240a44 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -92,14 +92,14 @@ typedef struct vchi_msg_vector_ex {
} VCHI_MSG_VECTOR_EX_T;
// Construct an entry in a msg vector for a pointer (p) of length (l)
-#define VCHI_VEC_POINTER(p,l) VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
+#define VCHI_VEC_POINTER(p, l) VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
// Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l)
-#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
+#define VCHI_VEC_HANDLE(h, o, l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
// Macros to manipulate 'FOURCC' values
#define MAKE_FOURCC(x) ((int32_t)((x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3]))
-#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF
+#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF, (x >> 16) & 0xFF, (x >> 8) & 0xFF, x & 0xFF
// Opaque service information
struct opaque_vchi_service_t;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 4/5] staging: vc04_services: Surround complex macros
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
` (2 preceding siblings ...)
2018-09-23 14:06 ` [PATCH v2 3/5] staging: vc04_services: Add spaces after commas Aymen Qader
@ 2018-09-23 14:06 ` Aymen Qader
2018-09-24 9:58 ` Dan Carpenter
2018-09-23 14:06 ` [PATCH v2 5/5] staging: vc04_services: Remove spaces after '*' Aymen Qader
` (2 subsequent siblings)
6 siblings, 1 reply; 14+ messages in thread
From: Aymen Qader @ 2018-09-23 14:06 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: Macros with complex values should be enclosed in parentheses
in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
drivers/staging/vc04_services/interface/vchi/vchi.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index d8e660240a44..f818cf2e27e1 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -92,14 +92,14 @@ typedef struct vchi_msg_vector_ex {
} VCHI_MSG_VECTOR_EX_T;
// Construct an entry in a msg vector for a pointer (p) of length (l)
-#define VCHI_VEC_POINTER(p, l) VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
+#define VCHI_VEC_POINTER(p, l) (VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } })
// Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l)
-#define VCHI_VEC_HANDLE(h, o, l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
+#define VCHI_VEC_HANDLE(h, o, l) (VCHI_VEC_HANDLE, { { (h), (o), (l) } })
// Macros to manipulate 'FOURCC' values
#define MAKE_FOURCC(x) ((int32_t)((x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3]))
-#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF, (x >> 16) & 0xFF, (x >> 8) & 0xFF, x & 0xFF
+#define FOURCC_TO_CHAR(x) ((x >> 24) & 0xFF, (x >> 16) & 0xFF, (x >> 8) & 0xFF, x & 0xFF)
// Opaque service information
struct opaque_vchi_service_t;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v2 4/5] staging: vc04_services: Surround complex macros
2018-09-23 14:06 ` [PATCH v2 4/5] staging: vc04_services: Surround complex macros Aymen Qader
@ 2018-09-24 9:58 ` Dan Carpenter
0 siblings, 0 replies; 14+ messages in thread
From: Dan Carpenter @ 2018-09-24 9:58 UTC (permalink / raw)
To: Aymen Qader
Cc: Stefan Wahren, devel, Greg Kroah-Hartman, linux-kernel,
Eric Anholt, linux-rpi-kernel, linux-arm-kernel
On Sun, Sep 23, 2018 at 03:06:19PM +0100, Aymen Qader wrote:
> This patch fixes the checkpatch.pl error:
>
> ERROR: Macros with complex values should be enclosed in parentheses
>
> in the interface/vchi directory
>
> Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
> ---
> drivers/staging/vc04_services/interface/vchi/vchi.h | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
> index d8e660240a44..f818cf2e27e1 100644
> --- a/drivers/staging/vc04_services/interface/vchi/vchi.h
> +++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
> @@ -92,14 +92,14 @@ typedef struct vchi_msg_vector_ex {
> } VCHI_MSG_VECTOR_EX_T;
>
> // Construct an entry in a msg vector for a pointer (p) of length (l)
> -#define VCHI_VEC_POINTER(p, l) VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
> +#define VCHI_VEC_POINTER(p, l) (VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } })
>
> // Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l)
> -#define VCHI_VEC_HANDLE(h, o, l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
> +#define VCHI_VEC_HANDLE(h, o, l) (VCHI_VEC_HANDLE, { { (h), (o), (l) } })
>
> // Macros to manipulate 'FOURCC' values
> #define MAKE_FOURCC(x) ((int32_t)((x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3]))
> -#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF, (x >> 16) & 0xFF, (x >> 8) & 0xFF, x & 0xFF
> +#define FOURCC_TO_CHAR(x) ((x >> 24) & 0xFF, (x >> 16) & 0xFF, (x >> 8) & 0xFF, x & 0xFF)
>
These are never used so far as I can see, but if they were, then this
would probably break the code. Go through the git log and find out how
they used to work and if they can be removed.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 5/5] staging: vc04_services: Remove spaces after '*'
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
` (3 preceding siblings ...)
2018-09-23 14:06 ` [PATCH v2 4/5] staging: vc04_services: Surround complex macros Aymen Qader
@ 2018-09-23 14:06 ` Aymen Qader
2018-09-24 10:02 ` Dan Carpenter
2018-09-24 10:06 ` [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Dan Carpenter
2018-09-24 17:27 ` [PATCH v3 0/4] " Aymen Qader
6 siblings, 1 reply; 14+ messages in thread
From: Aymen Qader @ 2018-09-23 14:06 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: "foo * bar" should be "foo* bar"
in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
drivers/staging/vc04_services/interface/vchi/vchi.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index f818cf2e27e1..77bf92018165 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -154,7 +154,7 @@ typedef struct service_info_tag {
extern "C" {
#endif
-extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
+extern /*@observer@*/ VCHI_CONNECTION_T *vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
const VCHI_MESSAGE_DRIVER_T * low_level);
// Routine used to initialise the vchi on both local + remote connections
@@ -175,7 +175,7 @@ extern int32_t vchi_crc_control(VCHI_CONNECTION_T *connection,
VCHI_CRC_CONTROL_T control);
// helper functions
-extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
+extern void *vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
extern void vchi_free_buffer(VCHI_SERVICE_HANDLE_T handle, void *address);
extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v2 5/5] staging: vc04_services: Remove spaces after '*'
2018-09-23 14:06 ` [PATCH v2 5/5] staging: vc04_services: Remove spaces after '*' Aymen Qader
@ 2018-09-24 10:02 ` Dan Carpenter
0 siblings, 0 replies; 14+ messages in thread
From: Dan Carpenter @ 2018-09-24 10:02 UTC (permalink / raw)
To: Aymen Qader
Cc: Stefan Wahren, devel, Greg Kroah-Hartman, linux-kernel,
Eric Anholt, linux-rpi-kernel, linux-arm-kernel
On Sun, Sep 23, 2018 at 03:06:20PM +0100, Aymen Qader wrote:
> This patch fixes the checkpatch.pl error:
>
> ERROR: "foo * bar" should be "foo* bar"
^^^^^^^^
It should be "foo *bar".
>
> in the interface/vchi directory
>
> Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
> ---
> drivers/staging/vc04_services/interface/vchi/vchi.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
> index f818cf2e27e1..77bf92018165 100644
> --- a/drivers/staging/vc04_services/interface/vchi/vchi.h
> +++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
> @@ -154,7 +154,7 @@ typedef struct service_info_tag {
> extern "C" {
> #endif
>
> -extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
^^^^^^^^^^^^^^^^^
> +extern /*@observer@*/ VCHI_CONNECTION_T *vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
> const VCHI_MESSAGE_DRIVER_T * low_level);
^^^^^^^^^^^
Change these as well.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
` (4 preceding siblings ...)
2018-09-23 14:06 ` [PATCH v2 5/5] staging: vc04_services: Remove spaces after '*' Aymen Qader
@ 2018-09-24 10:06 ` Dan Carpenter
2018-09-24 17:27 ` [PATCH v3 0/4] " Aymen Qader
6 siblings, 0 replies; 14+ messages in thread
From: Dan Carpenter @ 2018-09-24 10:06 UTC (permalink / raw)
To: Aymen Qader
Cc: Stefan Wahren, devel, Greg Kroah-Hartman, linux-kernel,
Eric Anholt, linux-rpi-kernel, linux-arm-kernel
On Sun, Sep 23, 2018 at 03:06:15PM +0100, Aymen Qader wrote:
> v2: Added cover letter correctly
>
We weren't super stressed that the cover letter threading was wrong.
We're not ogres. Anyway, just fixup the last two and resend a v3.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH v3 0/4] staging: vc04_services: Fix checkpatch.pl errors
2018-09-23 14:06 [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Aymen Qader
` (5 preceding siblings ...)
2018-09-24 10:06 ` [PATCH v2 0/5] staging: vc04_services: Fix checkpatch.pl errors Dan Carpenter
@ 2018-09-24 17:27 ` Aymen Qader
2018-09-24 17:27 ` [PATCH v3 1/4] staging: vc04_services: Fix "space prohibited" Aymen Qader
` (3 more replies)
6 siblings, 4 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-24 17:27 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patchset fixes the following checkpatch.pl errors in the
interface/vchi directory:
ERROR: space prohibited after/before that open/closed parenthesis
ERROR: code indent should use tabs where possible
ERROR: space required after that ','
ERROR: Macros with complex values should be enclosed in parentheses
ERROR: "foo * bar" should be "foo* bar"
Aymen Qader (4):
staging: vc04_services: Fix "space prohibited"
staging: vc04_services: Use tabs instead of spaces
staging: vc04_services: Remove unused macros
staging: vc04_services: Remove spaces after '*'
.../vc04_services/interface/vchi/vchi.h | 208 +++++++-----------
.../vc04_services/interface/vchi/vchi_cfg.h | 2 +-
2 files changed, 86 insertions(+), 124 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH v3 1/4] staging: vc04_services: Fix "space prohibited"
2018-09-24 17:27 ` [PATCH v3 0/4] " Aymen Qader
@ 2018-09-24 17:27 ` Aymen Qader
2018-09-24 17:27 ` [PATCH v3 2/4] staging: vc04_services: Use tabs instead of spaces Aymen Qader
` (2 subsequent siblings)
3 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-24 17:27 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: space prohibited after/before that open/closed parenthesis
in the interface/vchi directory.
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
.../vc04_services/interface/vchi/vchi.h | 106 +++++++++---------
.../vc04_services/interface/vchi/vchi_cfg.h | 2 +-
2 files changed, 54 insertions(+), 54 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index 66a3a060fad2..ffb8caaacaea 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -98,7 +98,7 @@ typedef struct vchi_msg_vector_ex {
#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
// Macros to manipulate 'FOURCC' values
-#define MAKE_FOURCC(x) ((int32_t)( (x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3] ))
+#define MAKE_FOURCC(x) ((int32_t)((x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3]))
#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF
// Opaque service information
@@ -154,25 +154,25 @@ typedef struct service_info_tag {
extern "C" {
#endif
-extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection( const VCHI_CONNECTION_API_T * function_table,
+extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
const VCHI_MESSAGE_DRIVER_T * low_level);
// Routine used to initialise the vchi on both local + remote connections
-extern int32_t vchi_initialise( VCHI_INSTANCE_T *instance_handle );
+extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
-extern int32_t vchi_exit( void );
+extern int32_t vchi_exit(void);
-extern int32_t vchi_connect( VCHI_CONNECTION_T **connections,
+extern int32_t vchi_connect(VCHI_CONNECTION_T **connections,
const uint32_t num_connections,
- VCHI_INSTANCE_T instance_handle );
+ VCHI_INSTANCE_T instance_handle);
//When this is called, ensure that all services have no data pending.
//Bulk transfers can remain 'queued'
-extern int32_t vchi_disconnect( VCHI_INSTANCE_T instance_handle );
+extern int32_t vchi_disconnect(VCHI_INSTANCE_T instance_handle);
// Global control over bulk CRC checking
-extern int32_t vchi_crc_control( VCHI_CONNECTION_T *connection,
- VCHI_CRC_CONTROL_T control );
+extern int32_t vchi_crc_control(VCHI_CONNECTION_T *connection,
+ VCHI_CRC_CONTROL_T control);
// helper functions
extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
@@ -183,32 +183,32 @@ extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
Global service API
*****************************************************************************/
// Routine to create a named service
-extern int32_t vchi_service_create( VCHI_INSTANCE_T instance_handle,
+extern int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
SERVICE_CREATION_T *setup,
- VCHI_SERVICE_HANDLE_T *handle );
+ VCHI_SERVICE_HANDLE_T *handle);
// Routine to destroy a service
-extern int32_t vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_destroy(const VCHI_SERVICE_HANDLE_T handle);
// Routine to open a named service
-extern int32_t vchi_service_open( VCHI_INSTANCE_T instance_handle,
+extern int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
SERVICE_CREATION_T *setup,
VCHI_SERVICE_HANDLE_T *handle);
-extern int32_t vchi_get_peer_version( const VCHI_SERVICE_HANDLE_T handle,
- short *peer_version );
+extern int32_t vchi_get_peer_version(const VCHI_SERVICE_HANDLE_T handle,
+ short *peer_version);
// Routine to close a named service
-extern int32_t vchi_service_close( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_close(const VCHI_SERVICE_HANDLE_T handle);
// Routine to increment ref count on a named service
-extern int32_t vchi_service_use( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_use(const VCHI_SERVICE_HANDLE_T handle);
// Routine to decrement ref count on a named service
-extern int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_service_release(const VCHI_SERVICE_HANDLE_T handle);
// Routine to set a control option for a named service
-extern int32_t vchi_service_set_option( const VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_service_set_option(const VCHI_SERVICE_HANDLE_T handle,
VCHI_SERVICE_OPTION_T option,
int value);
@@ -226,128 +226,128 @@ vchi_queue_user_message(VCHI_SERVICE_HANDLE_T handle,
// Routine to receive a msg from a service
// Dequeue is equivalent to hold, copy into client buffer, release
-extern int32_t vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_dequeue(VCHI_SERVICE_HANDLE_T handle,
void *data,
uint32_t max_data_size_to_read,
uint32_t *actual_msg_size,
- VCHI_FLAGS_T flags );
+ VCHI_FLAGS_T flags);
// Routine to look at a message in place.
// The message is not dequeued, so a subsequent call to peek or dequeue
// will return the same message.
-extern int32_t vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_peek(VCHI_SERVICE_HANDLE_T handle,
void **data,
uint32_t *msg_size,
- VCHI_FLAGS_T flags );
+ VCHI_FLAGS_T flags);
// Routine to remove a message after it has been read in place with peek
// The first message on the queue is dequeued.
-extern int32_t vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle );
+extern int32_t vchi_msg_remove(VCHI_SERVICE_HANDLE_T handle);
// Routine to look at a message in place.
// The message is dequeued, so the caller is left holding it; the descriptor is
// filled in and must be released when the user has finished with the message.
-extern int32_t vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_hold(VCHI_SERVICE_HANDLE_T handle,
void **data, // } may be NULL, as info can be
uint32_t *msg_size, // } obtained from HELD_MSG_T
VCHI_FLAGS_T flags,
- VCHI_HELD_MSG_T *message_descriptor );
+ VCHI_HELD_MSG_T *message_descriptor);
// Initialise an iterator to look through messages in place
-extern int32_t vchi_msg_look_ahead( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_msg_look_ahead(VCHI_SERVICE_HANDLE_T handle,
VCHI_MSG_ITER_T *iter,
- VCHI_FLAGS_T flags );
+ VCHI_FLAGS_T flags);
/******************************************************************************
Global service support API - operations on held messages and message iterators
*****************************************************************************/
// Routine to get the address of a held message
-extern void *vchi_held_msg_ptr( const VCHI_HELD_MSG_T *message );
+extern void *vchi_held_msg_ptr(const VCHI_HELD_MSG_T *message);
// Routine to get the size of a held message
-extern int32_t vchi_held_msg_size( const VCHI_HELD_MSG_T *message );
+extern int32_t vchi_held_msg_size(const VCHI_HELD_MSG_T *message);
// Routine to get the transmit timestamp as written into the header by the peer
-extern uint32_t vchi_held_msg_tx_timestamp( const VCHI_HELD_MSG_T *message );
+extern uint32_t vchi_held_msg_tx_timestamp(const VCHI_HELD_MSG_T *message);
// Routine to get the reception timestamp, written as we parsed the header
-extern uint32_t vchi_held_msg_rx_timestamp( const VCHI_HELD_MSG_T *message );
+extern uint32_t vchi_held_msg_rx_timestamp(const VCHI_HELD_MSG_T *message);
// Routine to release a held message after it has been processed
-extern int32_t vchi_held_msg_release( VCHI_HELD_MSG_T *message );
+extern int32_t vchi_held_msg_release(VCHI_HELD_MSG_T *message);
// Indicates whether the iterator has a next message.
-extern int32_t vchi_msg_iter_has_next( const VCHI_MSG_ITER_T *iter );
+extern int32_t vchi_msg_iter_has_next(const VCHI_MSG_ITER_T *iter);
// Return the pointer and length for the next message and advance the iterator.
-extern int32_t vchi_msg_iter_next( VCHI_MSG_ITER_T *iter,
+extern int32_t vchi_msg_iter_next(VCHI_MSG_ITER_T *iter,
void **data,
- uint32_t *msg_size );
+ uint32_t *msg_size);
// Remove the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
-extern int32_t vchi_msg_iter_remove( VCHI_MSG_ITER_T *iter );
+extern int32_t vchi_msg_iter_remove(VCHI_MSG_ITER_T *iter);
// Hold the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
-extern int32_t vchi_msg_iter_hold( VCHI_MSG_ITER_T *iter,
- VCHI_HELD_MSG_T *message );
+extern int32_t vchi_msg_iter_hold(VCHI_MSG_ITER_T *iter,
+ VCHI_HELD_MSG_T *message);
// Return information for the next message, and hold it, advancing the iterator.
-extern int32_t vchi_msg_iter_hold_next( VCHI_MSG_ITER_T *iter,
+extern int32_t vchi_msg_iter_hold_next(VCHI_MSG_ITER_T *iter,
void **data, // } may be NULL
uint32_t *msg_size, // }
- VCHI_HELD_MSG_T *message );
+ VCHI_HELD_MSG_T *message);
/******************************************************************************
Global bulk API
*****************************************************************************/
// Routine to prepare interface for a transfer from the other side
-extern int32_t vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_bulk_queue_receive(VCHI_SERVICE_HANDLE_T handle,
void *data_dst,
uint32_t data_size,
VCHI_FLAGS_T flags,
- void *transfer_handle );
+ void *transfer_handle);
// Prepare interface for a transfer from the other side into relocatable memory.
-int32_t vchi_bulk_queue_receive_reloc( const VCHI_SERVICE_HANDLE_T handle,
+int32_t vchi_bulk_queue_receive_reloc(const VCHI_SERVICE_HANDLE_T handle,
VCHI_MEM_HANDLE_T h_dst,
uint32_t offset,
uint32_t data_size,
const VCHI_FLAGS_T flags,
- void * const bulk_handle );
+ void * const bulk_handle);
// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
-extern int32_t vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_bulk_queue_transmit(VCHI_SERVICE_HANDLE_T handle,
const void *data_src,
uint32_t data_size,
VCHI_FLAGS_T flags,
- void *transfer_handle );
+ void *transfer_handle);
/******************************************************************************
Configuration plumbing
*****************************************************************************/
// function prototypes for the different mid layers (the state info gives the different physical connections)
-extern const VCHI_CONNECTION_API_T *single_get_func_table( void );
-//extern const VCHI_CONNECTION_API_T *local_server_get_func_table( void );
-//extern const VCHI_CONNECTION_API_T *local_client_get_func_table( void );
+extern const VCHI_CONNECTION_API_T *single_get_func_table(void);
+//extern const VCHI_CONNECTION_API_T *local_server_get_func_table(void);
+//extern const VCHI_CONNECTION_API_T *local_client_get_func_table(void);
// declare all message drivers here
-const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table( void );
+const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table(void);
#ifdef __cplusplus
}
#endif
-extern int32_t vchi_bulk_queue_transmit_reloc( VCHI_SERVICE_HANDLE_T handle,
+extern int32_t vchi_bulk_queue_transmit_reloc(VCHI_SERVICE_HANDLE_T handle,
VCHI_MEM_HANDLE_T h_src,
uint32_t offset,
uint32_t data_size,
VCHI_FLAGS_T flags,
- void *transfer_handle );
+ void *transfer_handle);
#endif /* VCHI_H_ */
/****************************** End of file **********************************/
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h b/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h
index b6f42b86f206..0d3c468c3504 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi_cfg.h
@@ -138,7 +138,7 @@
* can guarantee this by enabling unaligned transmits).
* Not API. */
#ifndef VCHI_MIN_BULK_SIZE
-# define VCHI_MIN_BULK_SIZE ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 )
+# define VCHI_MIN_BULK_SIZE (VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096)
#endif
/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 2/4] staging: vc04_services: Use tabs instead of spaces
2018-09-24 17:27 ` [PATCH v3 0/4] " Aymen Qader
2018-09-24 17:27 ` [PATCH v3 1/4] staging: vc04_services: Fix "space prohibited" Aymen Qader
@ 2018-09-24 17:27 ` Aymen Qader
2018-09-24 17:27 ` [PATCH v3 3/4] staging: vc04_services: Remove unused macros Aymen Qader
2018-09-24 17:27 ` [PATCH v3 4/4] staging: vc04_services: Remove spaces after '*' Aymen Qader
3 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-24 17:27 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: code indent should use tabs where possible
in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
.../vc04_services/interface/vchi/vchi.h | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index ffb8caaacaea..cb2582a4eb6a 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -71,23 +71,23 @@ typedef struct vchi_msg_vector_ex {
VCHI_MSG_VECTOR_TYPE_T type;
union {
// a memory handle
- struct {
- VCHI_MEM_HANDLE_T handle;
- uint32_t offset;
- int32_t vec_len;
- } handle;
+ struct {
+ VCHI_MEM_HANDLE_T handle;
+ uint32_t offset;
+ int32_t vec_len;
+ } handle;
// an ordinary data pointer
- struct {
- const void *vec_base;
- int32_t vec_len;
+ struct {
+ const void *vec_base;
+ int32_t vec_len;
} ptr;
// a nested vector list
- struct {
- struct vchi_msg_vector_ex *vec;
- uint32_t vec_len;
- } list;
+ struct {
+ struct vchi_msg_vector_ex *vec;
+ uint32_t vec_len;
+ } list;
} u;
} VCHI_MSG_VECTOR_EX_T;
@@ -155,7 +155,7 @@ extern "C" {
#endif
extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
- const VCHI_MESSAGE_DRIVER_T * low_level);
+ const VCHI_MESSAGE_DRIVER_T * low_level);
// Routine used to initialise the vchi on both local + remote connections
extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
@@ -163,8 +163,8 @@ extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
extern int32_t vchi_exit(void);
extern int32_t vchi_connect(VCHI_CONNECTION_T **connections,
- const uint32_t num_connections,
- VCHI_INSTANCE_T instance_handle);
+ const uint32_t num_connections,
+ VCHI_INSTANCE_T instance_handle);
//When this is called, ensure that all services have no data pending.
//Bulk transfers can remain 'queued'
@@ -172,7 +172,7 @@ extern int32_t vchi_disconnect(VCHI_INSTANCE_T instance_handle);
// Global control over bulk CRC checking
extern int32_t vchi_crc_control(VCHI_CONNECTION_T *connection,
- VCHI_CRC_CONTROL_T control);
+ VCHI_CRC_CONTROL_T control);
// helper functions
extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
@@ -184,19 +184,19 @@ extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
*****************************************************************************/
// Routine to create a named service
extern int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
- SERVICE_CREATION_T *setup,
- VCHI_SERVICE_HANDLE_T *handle);
+ SERVICE_CREATION_T *setup,
+ VCHI_SERVICE_HANDLE_T *handle);
// Routine to destroy a service
extern int32_t vchi_service_destroy(const VCHI_SERVICE_HANDLE_T handle);
// Routine to open a named service
extern int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
- SERVICE_CREATION_T *setup,
- VCHI_SERVICE_HANDLE_T *handle);
+ SERVICE_CREATION_T *setup,
+ VCHI_SERVICE_HANDLE_T *handle);
extern int32_t vchi_get_peer_version(const VCHI_SERVICE_HANDLE_T handle,
- short *peer_version);
+ short *peer_version);
// Routine to close a named service
extern int32_t vchi_service_close(const VCHI_SERVICE_HANDLE_T handle);
@@ -227,18 +227,18 @@ vchi_queue_user_message(VCHI_SERVICE_HANDLE_T handle,
// Routine to receive a msg from a service
// Dequeue is equivalent to hold, copy into client buffer, release
extern int32_t vchi_msg_dequeue(VCHI_SERVICE_HANDLE_T handle,
- void *data,
- uint32_t max_data_size_to_read,
- uint32_t *actual_msg_size,
- VCHI_FLAGS_T flags);
+ void *data,
+ uint32_t max_data_size_to_read,
+ uint32_t *actual_msg_size,
+ VCHI_FLAGS_T flags);
// Routine to look at a message in place.
// The message is not dequeued, so a subsequent call to peek or dequeue
// will return the same message.
extern int32_t vchi_msg_peek(VCHI_SERVICE_HANDLE_T handle,
- void **data,
- uint32_t *msg_size,
- VCHI_FLAGS_T flags);
+ void **data,
+ uint32_t *msg_size,
+ VCHI_FLAGS_T flags);
// Routine to remove a message after it has been read in place with peek
// The first message on the queue is dequeued.
@@ -248,15 +248,15 @@ extern int32_t vchi_msg_remove(VCHI_SERVICE_HANDLE_T handle);
// The message is dequeued, so the caller is left holding it; the descriptor is
// filled in and must be released when the user has finished with the message.
extern int32_t vchi_msg_hold(VCHI_SERVICE_HANDLE_T handle,
- void **data, // } may be NULL, as info can be
- uint32_t *msg_size, // } obtained from HELD_MSG_T
- VCHI_FLAGS_T flags,
- VCHI_HELD_MSG_T *message_descriptor);
+ void **data, // } may be NULL, as info can be
+ uint32_t *msg_size, // } obtained from HELD_MSG_T
+ VCHI_FLAGS_T flags,
+ VCHI_HELD_MSG_T *message_descriptor);
// Initialise an iterator to look through messages in place
extern int32_t vchi_msg_look_ahead(VCHI_SERVICE_HANDLE_T handle,
- VCHI_MSG_ITER_T *iter,
- VCHI_FLAGS_T flags);
+ VCHI_MSG_ITER_T *iter,
+ VCHI_FLAGS_T flags);
/******************************************************************************
Global service support API - operations on held messages and message iterators
@@ -282,8 +282,8 @@ extern int32_t vchi_msg_iter_has_next(const VCHI_MSG_ITER_T *iter);
// Return the pointer and length for the next message and advance the iterator.
extern int32_t vchi_msg_iter_next(VCHI_MSG_ITER_T *iter,
- void **data,
- uint32_t *msg_size);
+ void **data,
+ uint32_t *msg_size);
// Remove the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
@@ -292,13 +292,13 @@ extern int32_t vchi_msg_iter_remove(VCHI_MSG_ITER_T *iter);
// Hold the last message returned by vchi_msg_iter_next.
// Can only be called once after each call to vchi_msg_iter_next.
extern int32_t vchi_msg_iter_hold(VCHI_MSG_ITER_T *iter,
- VCHI_HELD_MSG_T *message);
+ VCHI_HELD_MSG_T *message);
// Return information for the next message, and hold it, advancing the iterator.
extern int32_t vchi_msg_iter_hold_next(VCHI_MSG_ITER_T *iter,
- void **data, // } may be NULL
- uint32_t *msg_size, // }
- VCHI_HELD_MSG_T *message);
+ void **data, // } may be NULL
+ uint32_t *msg_size, // }
+ VCHI_HELD_MSG_T *message);
/******************************************************************************
Global bulk API
@@ -306,25 +306,25 @@ extern int32_t vchi_msg_iter_hold_next(VCHI_MSG_ITER_T *iter,
// Routine to prepare interface for a transfer from the other side
extern int32_t vchi_bulk_queue_receive(VCHI_SERVICE_HANDLE_T handle,
- void *data_dst,
- uint32_t data_size,
- VCHI_FLAGS_T flags,
- void *transfer_handle);
+ void *data_dst,
+ uint32_t data_size,
+ VCHI_FLAGS_T flags,
+ void *transfer_handle);
// Prepare interface for a transfer from the other side into relocatable memory.
int32_t vchi_bulk_queue_receive_reloc(const VCHI_SERVICE_HANDLE_T handle,
- VCHI_MEM_HANDLE_T h_dst,
- uint32_t offset,
- uint32_t data_size,
- const VCHI_FLAGS_T flags,
- void * const bulk_handle);
+ VCHI_MEM_HANDLE_T h_dst,
+ uint32_t offset,
+ uint32_t data_size,
+ const VCHI_FLAGS_T flags,
+ void * const bulk_handle);
// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
extern int32_t vchi_bulk_queue_transmit(VCHI_SERVICE_HANDLE_T handle,
- const void *data_src,
- uint32_t data_size,
- VCHI_FLAGS_T flags,
- void *transfer_handle);
+ const void *data_src,
+ uint32_t data_size,
+ VCHI_FLAGS_T flags,
+ void *transfer_handle);
/******************************************************************************
Configuration plumbing
@@ -343,11 +343,11 @@ const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table(void);
#endif
extern int32_t vchi_bulk_queue_transmit_reloc(VCHI_SERVICE_HANDLE_T handle,
- VCHI_MEM_HANDLE_T h_src,
- uint32_t offset,
- uint32_t data_size,
- VCHI_FLAGS_T flags,
- void *transfer_handle);
+ VCHI_MEM_HANDLE_T h_src,
+ uint32_t offset,
+ uint32_t data_size,
+ VCHI_FLAGS_T flags,
+ void *transfer_handle);
#endif /* VCHI_H_ */
/****************************** End of file **********************************/
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 3/4] staging: vc04_services: Remove unused macros
2018-09-24 17:27 ` [PATCH v3 0/4] " Aymen Qader
2018-09-24 17:27 ` [PATCH v3 1/4] staging: vc04_services: Fix "space prohibited" Aymen Qader
2018-09-24 17:27 ` [PATCH v3 2/4] staging: vc04_services: Use tabs instead of spaces Aymen Qader
@ 2018-09-24 17:27 ` Aymen Qader
2018-09-24 17:27 ` [PATCH v3 4/4] staging: vc04_services: Remove spaces after '*' Aymen Qader
3 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-24 17:27 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch removes the macros and structs associated with the
"vchi_msg_queuev_ex" function, which was previously removed in 49bec49.
Also fixes the checkpatch.pl errors:
ERROR: Macros with complex values should be enclosed in parentheses
ERROR: space required after that ','
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
.../vc04_services/interface/vchi/vchi.h | 38 -------------------
1 file changed, 38 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index cb2582a4eb6a..f96676227ddc 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -60,46 +60,8 @@ struct vchi_version {
#define VCHI_VERSION(v_) { v_, v_ }
#define VCHI_VERSION_EX(v_, m_) { v_, m_ }
-typedef enum {
- VCHI_VEC_POINTER,
- VCHI_VEC_HANDLE,
- VCHI_VEC_LIST
-} VCHI_MSG_VECTOR_TYPE_T;
-
-typedef struct vchi_msg_vector_ex {
-
- VCHI_MSG_VECTOR_TYPE_T type;
- union {
- // a memory handle
- struct {
- VCHI_MEM_HANDLE_T handle;
- uint32_t offset;
- int32_t vec_len;
- } handle;
-
- // an ordinary data pointer
- struct {
- const void *vec_base;
- int32_t vec_len;
- } ptr;
-
- // a nested vector list
- struct {
- struct vchi_msg_vector_ex *vec;
- uint32_t vec_len;
- } list;
- } u;
-} VCHI_MSG_VECTOR_EX_T;
-
-// Construct an entry in a msg vector for a pointer (p) of length (l)
-#define VCHI_VEC_POINTER(p,l) VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
-
-// Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l)
-#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE, { { (h), (o), (l) } }
-
// Macros to manipulate 'FOURCC' values
#define MAKE_FOURCC(x) ((int32_t)((x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3]))
-#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF
// Opaque service information
struct opaque_vchi_service_t;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 4/4] staging: vc04_services: Remove spaces after '*'
2018-09-24 17:27 ` [PATCH v3 0/4] " Aymen Qader
` (2 preceding siblings ...)
2018-09-24 17:27 ` [PATCH v3 3/4] staging: vc04_services: Remove unused macros Aymen Qader
@ 2018-09-24 17:27 ` Aymen Qader
3 siblings, 0 replies; 14+ messages in thread
From: Aymen Qader @ 2018-09-24 17:27 UTC (permalink / raw)
Cc: Aymen Qader, Eric Anholt, Stefan Wahren, Greg Kroah-Hartman,
linux-rpi-kernel, linux-arm-kernel, devel, linux-kernel
This patch fixes the checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"
in the interface/vchi directory
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
---
drivers/staging/vc04_services/interface/vchi/vchi.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchi/vchi.h b/drivers/staging/vc04_services/interface/vchi/vchi.h
index f96676227ddc..3fe19d72b3ab 100644
--- a/drivers/staging/vc04_services/interface/vchi/vchi.h
+++ b/drivers/staging/vc04_services/interface/vchi/vchi.h
@@ -116,8 +116,8 @@ typedef struct service_info_tag {
extern "C" {
#endif
-extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection(const VCHI_CONNECTION_API_T * function_table,
- const VCHI_MESSAGE_DRIVER_T * low_level);
+extern /*@observer@*/ VCHI_CONNECTION_T *vchi_create_connection(const VCHI_CONNECTION_API_T *function_table,
+ const VCHI_MESSAGE_DRIVER_T *low_level);
// Routine used to initialise the vchi on both local + remote connections
extern int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle);
@@ -137,7 +137,7 @@ extern int32_t vchi_crc_control(VCHI_CONNECTION_T *connection,
VCHI_CRC_CONTROL_T control);
// helper functions
-extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
+extern void *vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
extern void vchi_free_buffer(VCHI_SERVICE_HANDLE_T handle, void *address);
extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread