[PATCH AUTOSEL 4.9 01/23] mac80211: Run TXQ teardown code before de-registering interfaces

[PATCH AUTOSEL 4.9 01/23] mac80211: Run TXQ teardown code before de-registering interfaces

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@toke.dk>

[ Upstream commit 77cfaf52eca5cac30ed029507e0cab065f888995 ]

The TXQ teardown code can reference the vif data structures that are
stored in the netdev private memory area if there are still packets on
the queue when it is being freed. Since the TXQ teardown code is run
after the netdevs are freed, this can lead to a use-after-free. Fix this
by moving the TXQ teardown code to earlier in ieee80211_unregister_hw().

Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 2bb6899854d4..6389ce868668 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1164,6 +1164,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 #if IS_ENABLED(CONFIG_IPV6)
 	unregister_inet6addr_notifier(&local->ifa6_notifier);
 #endif
+	ieee80211_txq_teardown_flows(local);
 
 	rtnl_lock();
 
@@ -1191,7 +1192,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 	skb_queue_purge(&local->skb_queue);
 	skb_queue_purge(&local->skb_queue_unreliable);
 	skb_queue_purge(&local->skb_queue_tdls_chsw);
-	ieee80211_txq_teardown_flows(local);
 
 	destroy_workqueue(local->workqueue);
 	wiphy_unregister(local->hw.wiphy);
-- 
2.17.1

[PATCH AUTOSEL 4.9 02/23] KVM: PPC: Book3S HV: Don't truncate HPTE index in xlate function

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 46dec40fb741f00f1864580130779aeeaf24fb3d ]

This fixes a bug which causes guest virtual addresses to get translated
to guest real addresses incorrectly when the guest is using the HPT MMU
and has more than 256GB of RAM, or more specifically has a HPT larger
than 2GB.  This has showed up in testing as a failure of the host to
emulate doorbell instructions correctly on POWER9 for HPT guests with
more than 256GB of RAM.

The bug is that the HPTE index in kvmppc_mmu_book3s_64_hv_xlate()
is stored as an int, and in forming the HPTE address, the index gets
shifted left 4 bits as an int before being signed-extended to 64 bits.
The simple fix is to make the variable a long int, matching the
return type of kvmppc_hv_find_lock_hpte(), which is what calculates
the index.

Fixes: 697d3899dcb4 ("KVM: PPC: Implement MMIO emulation support for Book3S HV guests")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/kvm/book3s_64_mmu_hv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 05f09ae82587..915e89fcd946 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -314,7 +314,7 @@ static int kvmppc_mmu_book3s_64_hv_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
 	unsigned long pp, key;
 	unsigned long v, gr;
 	__be64 *hptep;
-	int index;
+	long int index;
 	int virtmode = vcpu->arch.shregs.msr & (data ? MSR_DR : MSR_IR);
 
 	/* Get SLB entry */
-- 
2.17.1

[PATCH AUTOSEL 4.9 03/23] mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_X

[Sasha Levin]

From: Danek Duvall <duvall@comfychair.org>

[ Upstream commit 67d1ba8a6dc83d90cd58b89fa6cbf9ae35a0cf7f ]

The mod mask for VHT capabilities intends to say that you can override
the number of STBC receive streams, and it does, but only by accident.
The IEEE80211_VHT_CAP_RXSTBC_X aren't bits to be set, but values (albeit
left-shifted).  ORing the bits together gets the right answer, but we
should use the _MASK macro here instead.

Signed-off-by: Danek Duvall <duvall@comfychair.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6389ce868668..4729e1c09bcc 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -466,10 +466,7 @@ static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
 		cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
 			    IEEE80211_VHT_CAP_SHORT_GI_80 |
 			    IEEE80211_VHT_CAP_SHORT_GI_160 |
-			    IEEE80211_VHT_CAP_RXSTBC_1 |
-			    IEEE80211_VHT_CAP_RXSTBC_2 |
-			    IEEE80211_VHT_CAP_RXSTBC_3 |
-			    IEEE80211_VHT_CAP_RXSTBC_4 |
+			    IEEE80211_VHT_CAP_RXSTBC_MASK |
 			    IEEE80211_VHT_CAP_TXSTBC |
 			    IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
 			    IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
-- 
2.17.1

[PATCH AUTOSEL 4.9 04/23] mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_X

[Sasha Levin]

From: Danek Duvall <duvall@comfychair.org>

[ Upstream commit d7c863a2f65e48f442379f4ee1846d52e0c5d24d ]

The mac80211_hwsim driver intends to say that it supports up to four
STBC receive streams, but instead it ends up saying something undefined.
The IEEE80211_VHT_CAP_RXSTBC_X macros aren't independent bits that can
be ORed together, but values.  In this case, _4 is the appropriate one
to use.

Signed-off-by: Danek Duvall <duvall@comfychair.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 95e96419b4cf..4bb36dc73433 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2569,9 +2569,6 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 				IEEE80211_VHT_CAP_SHORT_GI_80 |
 				IEEE80211_VHT_CAP_SHORT_GI_160 |
 				IEEE80211_VHT_CAP_TXSTBC |
-				IEEE80211_VHT_CAP_RXSTBC_1 |
-				IEEE80211_VHT_CAP_RXSTBC_2 |
-				IEEE80211_VHT_CAP_RXSTBC_3 |
 				IEEE80211_VHT_CAP_RXSTBC_4 |
 				IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
 			sband->vht_cap.vht_mcs.rx_mcs_map =
-- 
2.17.1

[PATCH AUTOSEL 4.9 05/23] gpio: adp5588: Fix sleep-in-atomic-context bug

[Sasha Levin]

From: Michael Hennerich <michael.hennerich@analog.com>

[ Upstream commit 6537886cdc9a637711fd6da980dbb87c2c87c9aa ]

This fixes:
[BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug
                          in adp5588_gpio_write()
[BUG] gpio: gpio-adp5588: A possible sleep-in-atomic-context bug
                          in adp5588_gpio_direction_input()

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpio/gpio-adp5588.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index c0f718b12317..c85407abc201 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -41,6 +41,8 @@ struct adp5588_gpio {
 	uint8_t int_en[3];
 	uint8_t irq_mask[3];
 	uint8_t irq_stat[3];
+	uint8_t int_input_en[3];
+	uint8_t int_lvl_cached[3];
 };
 
 static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
@@ -173,12 +175,28 @@ static void adp5588_irq_bus_sync_unlock(struct irq_data *d)
 	struct adp5588_gpio *dev = irq_data_get_irq_chip_data(d);
 	int i;
 
-	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++)
+	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
+		if (dev->int_input_en[i]) {
+			mutex_lock(&dev->lock);
+			dev->dir[i] &= ~dev->int_input_en[i];
+			dev->int_input_en[i] = 0;
+			adp5588_gpio_write(dev->client, GPIO_DIR1 + i,
+					   dev->dir[i]);
+			mutex_unlock(&dev->lock);
+		}
+
+		if (dev->int_lvl_cached[i] != dev->int_lvl[i]) {
+			dev->int_lvl_cached[i] = dev->int_lvl[i];
+			adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + i,
+					   dev->int_lvl[i]);
+		}
+
 		if (dev->int_en[i] ^ dev->irq_mask[i]) {
 			dev->int_en[i] = dev->irq_mask[i];
 			adp5588_gpio_write(dev->client, GPIO_INT_EN1 + i,
 					   dev->int_en[i]);
 		}
+	}
 
 	mutex_unlock(&dev->irq_lock);
 }
@@ -221,9 +239,7 @@ static int adp5588_irq_set_type(struct irq_data *d, unsigned int type)
 	else
 		return -EINVAL;
 
-	adp5588_gpio_direction_input(&dev->gpio_chip, gpio);
-	adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + bank,
-			   dev->int_lvl[bank]);
+	dev->int_input_en[bank] |= bit;
 
 	return 0;
 }
-- 
2.17.1

[PATCH AUTOSEL 4.9 07/23] net: hns: add netif_carrier_off before change speed and duplex

[Sasha Levin]

From: Peng Li <lipeng321@huawei.com>

[ Upstream commit 455c4401fe7a538facaffb35b906ce19f1ece474 ]

If there are packets in hardware when changing the speed
or duplex, it may cause hardware hang up.

This patch adds netif_carrier_off before change speed and
duplex in ethtool_ops.set_link_ksettings, and adds
netif_carrier_on after complete the change.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index 6be0cae44e9b..4cd163390dcc 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -243,7 +243,9 @@ static int hns_nic_set_link_ksettings(struct net_device *net_dev,
 	}
 
 	if (h->dev->ops->adjust_link) {
+		netif_carrier_off(net_dev);
 		h->dev->ops->adjust_link(h, (int)speed, cmd->base.duplex);
+		netif_carrier_on(net_dev);
 		return 0;
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 06/23] mac80211: mesh: fix HWMP sequence numbering to follow standard

[Sasha Levin]

From: Yuan-Chi Pang <fu3mo6goo@gmail.com>

[ Upstream commit 1f631c3201fe5491808df143d8fcba81b3197ffd ]

IEEE 802.11-2016 14.10.8.3 HWMP sequence numbering says:
If it is a target mesh STA, it shall update its own HWMP SN to
maximum (current HWMP SN, target HWMP SN in the PREQ element) + 1
immediately before it generates a PREP element in response to a
PREQ element.

Signed-off-by: Yuan-Chi Pang <fu3mo6goo@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/mesh_hwmp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index fed598a202c8..b0acb2961e80 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -563,6 +563,10 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 		forward = false;
 		reply = true;
 		target_metric = 0;
+
+		if (SN_GT(target_sn, ifmsh->sn))
+			ifmsh->sn = target_sn;
+
 		if (time_after(jiffies, ifmsh->last_sn_update +
 					net_traversal_jiffies(sdata)) ||
 		    time_before(jiffies, ifmsh->last_sn_update)) {
-- 
2.17.1

[PATCH AUTOSEL 4.9 09/23] gpio: Fix crash due to registration race

[Sasha Levin]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit d49b48f088c323dbacae44dfbe56d9c985c8a2a1 ]

gpiochip_add_data_with_key() adds the gpiochip to the gpio_devices list
before of_gpiochip_add() is called, but it's only the latter which sets
the ->of_xlate function pointer.  gpiochip_find() can be called by
someone else between these two actions, and it can find the chip and
call of_gpiochip_match_node_and_xlate() which leads to the following
crash due to a NULL ->of_xlate().

 Unhandled prefetch abort: page domain fault (0x01b) at 0x00000000
 Modules linked in: leds_gpio(+) gpio_generic(+)
 CPU: 0 PID: 830 Comm: insmod Not tainted 4.18.0+ #43
 Hardware name: ARM-Versatile Express
 PC is at   (null)
 LR is at of_gpiochip_match_node_and_xlate+0x2c/0x38
 Process insmod (pid: 830, stack limit = 0x(ptrval))
  (of_gpiochip_match_node_and_xlate) from  (gpiochip_find+0x48/0x84)
  (gpiochip_find) from  (of_get_named_gpiod_flags+0xa8/0x238)
  (of_get_named_gpiod_flags) from  (gpiod_get_from_of_node+0x2c/0xc8)
  (gpiod_get_from_of_node) from  (devm_fwnode_get_index_gpiod_from_child+0xb8/0x144)
  (devm_fwnode_get_index_gpiod_from_child) from  (gpio_led_probe+0x208/0x3c4 [leds_gpio])
  (gpio_led_probe [leds_gpio]) from  (platform_drv_probe+0x48/0x9c)
  (platform_drv_probe) from  (really_probe+0x1d0/0x3d4)
  (really_probe) from  (driver_probe_device+0x78/0x1c0)
  (driver_probe_device) from  (__driver_attach+0x120/0x13c)
  (__driver_attach) from  (bus_for_each_dev+0x68/0xb4)
  (bus_for_each_dev) from  (bus_add_driver+0x1a8/0x268)
  (bus_add_driver) from  (driver_register+0x78/0x10c)
  (driver_register) from  (do_one_initcall+0x54/0x1fc)
  (do_one_initcall) from  (do_init_module+0x64/0x1f4)
  (do_init_module) from  (load_module+0x2198/0x26ac)
  (load_module) from  (sys_finit_module+0xe0/0x110)
  (sys_finit_module) from  (ret_fast_syscall+0x0/0x54)

One way to fix this would be to rework the hairy registration sequence
in gpiochip_add_data_with_key(), but since I'd probably introduce a
couple of new bugs if I attempted that, simply add a check for a
non-NULL of_xlate function pointer in
of_gpiochip_match_node_and_xlate().  This works since the driver looking
for the gpio will simply fail to find the gpio and defer its probe and
be reprobed when the driver which is registering the gpiochip has fully
completed its probe.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpio/gpiolib-of.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 193f15d50bba..aac84329c759 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -31,6 +31,7 @@ static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data)
 	struct of_phandle_args *gpiospec = data;
 
 	return chip->gpiodev->dev.of_node == gpiospec->np &&
+				chip->of_xlate &&
 				chip->of_xlate(chip, gpiospec, NULL) >= 0;
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 08/23] cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IE

[Sasha Levin]

From: Arunk Khandavalli <akhandav@codeaurora.org>

[ Upstream commit 4f0223bfe9c3e62d8f45a85f1ef1b18a8a263ef9 ]

nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with
is_valid_ie_attr() before dereferencing it, but that helper function
returns true in case of NULL pointer (i.e., attribute not included).
This can result to dereferencing a NULL pointer. Fix that by explicitly
checking that NL80211_ATTR_IE is included.

Fixes: 355199e02b83 ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition")
Signed-off-by: Arunk Khandavalli <akhandav@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/wireless/nl80211.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 6afac189d20f..0e91ec49d3da 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -11148,6 +11148,7 @@ static int nl80211_update_ft_ies(struct sk_buff *skb, struct genl_info *info)
 		return -EOPNOTSUPP;
 
 	if (!info->attrs[NL80211_ATTR_MDID] ||
+	    !info->attrs[NL80211_ATTR_IE] ||
 	    !is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
 		return -EINVAL;
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 11/23] RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0

[Sasha Levin]

From: Xiao Ni <xni@redhat.com>

[ Upstream commit 1d0ffd264204eba1861865560f1f7f7a92919384 ]

In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks
have bad blocks, the max_sectors is less than last. It will call goto read_more many
times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition
sectors_done is not 0. So the value passed to the argument force of raise_barrier is
true.

In raise_barrier it checks conf->barrier when force is true. If force is true and
conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer
disks. And in the callback function of the bio it calls lower_barrier. If the bio
finishes before calling raise_barrier again, it can trigger the BUG_ON.

Add one pair of raise_barrier/lower_barrier to fix this bug.

Signed-off-by: Xiao Ni <xni@redhat.com>
Suggested-by: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/raid10.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 6da66c3acd46..b3046063402c 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4381,11 +4381,12 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
 		allow_barrier(conf);
 	}
 
+	raise_barrier(conf, 0);
 read_more:
 	/* Now schedule reads for blocks from sector_nr to last */
 	r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
 	r10_bio->state = 0;
-	raise_barrier(conf, sectors_done != 0);
+	raise_barrier(conf, 1);
 	atomic_set(&r10_bio->remaining, 0);
 	r10_bio->mddev = mddev;
 	r10_bio->sector = sector_nr;
@@ -4492,6 +4493,8 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
 	if (sector_nr <= last)
 		goto read_more;
 
+	lower_barrier(conf);
+
 	/* Now that we have done the whole section we can
 	 * update reshape_progress
 	 */
-- 
2.17.1

[PATCH AUTOSEL 4.9 10/23] ARC: atomics: unbork atomic_fetch_##op()

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 3fcbb8260a87efb691d837e8cd24e81f65b3eb70 ]

In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK

| INFO: task syslogd:77 blocked for more than 10 seconds.
|       Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40
| "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
| message.
| syslogd         D    0    77     76 0x00000000
|
| Stack Trace:
|  __switch_to+0x0/0xac
|  __schedule+0x1b2/0x730
|  io_schedule+0x5c/0xc0
|  __lock_page+0x98/0xdc
|  find_lock_entry+0x38/0x100
|  shmem_getpage_gfp.isra.3+0x82/0xbfc
|  shmem_fault+0x46/0x138
|  handle_mm_fault+0x5bc/0x924
|  do_page_fault+0x100/0x2b8
|  ret_from_exception+0x0/0x8

He bisected to 84c6591103db ("locking/atomics,
asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()")

This commit however only unmasked the real issue introduced by commit
4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") which missed the
retry-if-scond-failed branch in atomic_fetch_##op() macros.

The bisected commit started using atomic_fetch_##op() macros for building
the rest of atomics.

Fixes: 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build")
Reported-by: Eugeniy Paltsev <paltsev@synopsys.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: wrote changelog]
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arc/include/asm/atomic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 54b54da6384c..49112f76710c 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -84,7 +84,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 	"1:	llock   %[orig], [%[ctr]]		\n"		\
 	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
 	"	scond   %[val], [%[ctr]]		\n"		\
-	"						\n"		\
+	"	bnz     1b				\n"		\
 	: [val]	"=&r"	(val),						\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
-- 
2.17.1

[PATCH AUTOSEL 4.9 12/23] net: ethernet: cpsw-phy-sel: prefer phandle for phy sel

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 18eb8aea7fb2fb4490e578b1b8a1096c34b2fc48 ]

The cpsw-phy-sel device is not a child of the cpsw interconnect target
module. It lives in the system control module.

Let's fix this issue by trying to use cpsw-phy-sel phandle first if it
exists and if not fall back to current usage of trying to find the
cpsw-phy-sel child. That way the phy sel driver can be a child of the
system control module where it belongs in the device tree.

Without this fix, we cannot have a proper interconnect target module
hierarchy in device tree for things like genpd.

Note that deferred probe is mostly not supported by cpsw and this patch
does not attempt to fix that. In case deferred probe support is needed,
this could be added to cpsw_slave_open() and phy_connect() so they start
handling and returning errors.

For documenting it, looks like the cpsw-phy-sel is used for all cpsw device
tree nodes. It's missing the related binding documentation, so let's also
update the binding documentation accordingly.

Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/ti/cpsw-phy-sel.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c
index 0c1adad7415d..396e1cd10667 100644
--- a/drivers/net/ethernet/ti/cpsw-phy-sel.c
+++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c
@@ -170,10 +170,13 @@ void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave)
 	struct device_node *node;
 	struct cpsw_phy_sel_priv *priv;
 
-	node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel");
+	node = of_parse_phandle(dev->of_node, "cpsw-phy-sel", 0);
 	if (!node) {
-		dev_err(dev, "Phy mode driver DT not found\n");
-		return;
+		node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel");
+		if (!node) {
+			dev_err(dev, "Phy mode driver DT not found\n");
+			return;
+		}
 	}
 
 	dev = bus_find_device(&platform_bus_type, NULL, node, match);
-- 
2.17.1

[PATCH AUTOSEL 4.9 14/23] i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 4c85609b08c4761eca0a40fd7beb06bc650f252d ]

This driver currently emits a STOP if the next message is not
I2C_MD_RD.  It should not do it because it disturbs the I2C_RDWR
ioctl, where read/write transactions are combined without STOP
between.

Issue STOP only when the message is the last one _or_ flagged with
I2C_M_STOP.

Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/i2c/busses/i2c-uniphier-f.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index db9105e52c79..0da4991dd356 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -400,11 +400,8 @@ static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap,
 		return ret;
 
 	for (msg = msgs; msg < emsg; msg++) {
-		/* If next message is read, skip the stop condition */
-		bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD);
-		/* but, force it if I2C_M_STOP is set */
-		if (msg->flags & I2C_M_STOP)
-			stop = true;
+		/* Emit STOP if it is the last message or I2C_M_STOP is set. */
+		bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
 
 		ret = uniphier_fi2c_master_xfer_one(adap, msg, stop);
 		if (ret)
-- 
2.17.1

[PATCH AUTOSEL 4.9 13/23] i2c: uniphier: issue STOP only for last message or I2C_M_STOP

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 38f5d8d8cbb2ffa2b54315118185332329ec891c ]

This driver currently emits a STOP if the next message is not
I2C_MD_RD.  It should not do it because it disturbs the I2C_RDWR
ioctl, where read/write transactions are combined without STOP
between.

Issue STOP only when the message is the last one _or_ flagged with
I2C_M_STOP.

Fixes: dd6fd4a32793 ("i2c: uniphier: add UniPhier FIFO-less I2C driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/i2c/busses/i2c-uniphier.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 56e92af46ddc..fdfcee9230e4 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -247,11 +247,8 @@ static int uniphier_i2c_master_xfer(struct i2c_adapter *adap,
 		return ret;
 
 	for (msg = msgs; msg < emsg; msg++) {
-		/* If next message is read, skip the stop condition */
-		bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD);
-		/* but, force it if I2C_M_STOP is set */
-		if (msg->flags & I2C_M_STOP)
-			stop = true;
+		/* Emit STOP if it is the last message or I2C_M_STOP is set. */
+		bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
 
 		ret = uniphier_i2c_master_xfer_one(adap, msg, stop);
 		if (ret)
-- 
2.17.1

[PATCH AUTOSEL 4.9 16/23] fs/cifs: don't translate SFM_SLASH (U+F026) to backslash

[Sasha Levin]

From: Jon Kuhn <jkuhn@barracuda.com>

[ Upstream commit c15e3f19a6d5c89b1209dc94b40e568177cb0921 ]

When a Mac client saves an item containing a backslash to a file server
the backslash is represented in the CIFS/SMB protocol as as U+F026.
Before this change, listing a directory containing an item with a
backslash in its name will return that item with the backslash
represented with a true backslash character (U+005C) because
convert_sfm_character mapped U+F026 to U+005C when interpretting the
CIFS/SMB protocol response.  However, attempting to open or stat the
path using a true backslash will result in an error because
convert_to_sfm_char does not map U+005C back to U+F026 causing the
CIFS/SMB request to be made with the backslash represented as U+005C.

This change simply prevents the U+F026 to U+005C conversion from
happenning.  This is analogous to how the code does not do any
translation of UNI_SLASH (U+F000).

Signed-off-by: Jon Kuhn <jkuhn@barracuda.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/cifs/cifs_unicode.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index a0b3e7d1be48..211ac472cb9d 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -101,9 +101,6 @@ convert_sfm_char(const __u16 src_char, char *target)
 	case SFM_LESSTHAN:
 		*target = '<';
 		break;
-	case SFM_SLASH:
-		*target = '\\';
-		break;
 	case SFM_SPACE:
 		*target = ' ';
 		break;
-- 
2.17.1

[PATCH AUTOSEL 4.9 15/23] net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 16fe10cf92783ed9ceb182d6ea2b8adf5e8ec1b8 ]

The kernel module may sleep with holding a spinlock.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] usleep_range
drivers/net/ethernet/cadence/macb_main.c, 648:
	usleep_range in macb_halt_tx
drivers/net/ethernet/cadence/macb_main.c, 730:
	macb_halt_tx in macb_tx_error_task
drivers/net/ethernet/cadence/macb_main.c, 721:
	_raw_spin_lock_irqsave in macb_tx_error_task

To fix this bug, usleep_range() is replaced with udelay().

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/cadence/macb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index ec09fcece711..2e1585635083 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -517,7 +517,7 @@ static int macb_halt_tx(struct macb *bp)
 		if (!(status & MACB_BIT(TGO)))
 			return 0;
 
-		usleep_range(10, 250);
+		udelay(250);
 	} while (time_before(halt_time, timeout));
 
 	return -ETIMEDOUT;
-- 
2.17.1

[PATCH AUTOSEL 4.9 18/23] mac80211: fix a race between restart and CSA flows

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit f3ffb6c3a28963657eb8b02a795d75f2ebbd5ef4 ]

We hit a problem with iwlwifi that was caused by a bug in
mac80211. A bug in iwlwifi caused the firwmare to crash in
certain cases in channel switch. Because of that bug,
drv_pre_channel_switch would fail and trigger the restart
flow.
Now we had the hw restart worker which runs on the system's
workqueue and the csa_connection_drop_work worker that runs
on mac80211's workqueue that can run together. This is
obviously problematic since the restart work wants to
reconfigure the connection, while the csa_connection_drop_work
worker does the exact opposite: it tries to disconnect.

Fix this by cancelling the csa_connection_drop_work worker
in the restart worker.

Note that this can sound racy: we could have:

driver   iface_work   CSA_work   restart_work
+++++++++++++++++++++++++++++++++++++++++++++
              |
 <--drv_cs ---|
<FW CRASH!>
-CS FAILED-->
              |                       |
              |                 cancel_work(CSA)
           schedule                   |
           CSA work                   |
                         |            |
                        Race between those 2

But this is not possible because we flush the workqueue
in the restart worker before we cancel the CSA worker.
That would be bullet proof if we could guarantee that
we schedule the CSA worker only from the iface_work
which runs on the workqueue (and not on the system's
workqueue), but unfortunately we do have an instance
in which we schedule the CSA work outside the context
of the workqueue (ieee80211_chswitch_done).

Note also that we should probably cancel other workers
like beacon_connection_loss_work and possibly others
for different types of interfaces, at the very least,
IBSS should suffer from the exact same problem, but for
now, do the minimum to fix the actual bug that was actually
experienced and reproduced.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/main.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 4729e1c09bcc..e3bbfb20ae82 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -254,8 +254,27 @@ static void ieee80211_restart_work(struct work_struct *work)
 	     "%s called with hardware scan in progress\n", __func__);
 
 	rtnl_lock();
-	list_for_each_entry(sdata, &local->interfaces, list)
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		/*
+		 * XXX: there may be more work for other vif types and even
+		 * for station mode: a good thing would be to run most of
+		 * the iface type's dependent _stop (ieee80211_mg_stop,
+		 * ieee80211_ibss_stop) etc...
+		 * For now, fix only the specific bug that was seen: race
+		 * between csa_connection_drop_work and us.
+		 */
+		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+			/*
+			 * This worker is scheduled from the iface worker that
+			 * runs on mac80211's workqueue, so we can't be
+			 * scheduling this worker after the cancel right here.
+			 * The exception is ieee80211_chswitch_done.
+			 * Then we can have a race...
+			 */
+			cancel_work_sync(&sdata->u.mgd.csa_connection_drop_work);
+		}
 		flush_delayed_work(&sdata->dec_tailroom_needed_wk);
+	}
 	ieee80211_scan_cancel(local);
 
 	/* make sure any new ROC will consider local->in_reconfig */
-- 
2.17.1

[PATCH AUTOSEL 4.9 17/23] cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8442938c3a2177ba16043b3a935f2c78266ad399 ]

The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we
are truncating away the high bits.  I noticed this bug because in commit
9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6")
we made "freq <= 56160 + 2160 * 6" a valid requency when before it was
only "freq <= 56160 + 2160 * 4" that was valid.  It introduces a static
checker warning:

    net/wireless/util.c:1571 ieee80211_chandef_to_operating_class()
    warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)'

But really we probably shouldn't have been truncating the high bits
away to begin with.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/wireless/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index bb54d9db82df..3b9a81998014 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1432,7 +1432,7 @@ bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef,
 					  u8 *op_class)
 {
 	u8 vht_opclass;
-	u16 freq = chandef->center_freq1;
+	u32 freq = chandef->center_freq1;
 
 	if (freq >= 2412 && freq <= 2472) {
 		if (chandef->width > NL80211_CHAN_WIDTH_40)
-- 
2.17.1

[PATCH AUTOSEL 4.9 19/23] mac80211: Fix station bandwidth setting after channel switch

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 0007e94355fdb71a1cf5dba0754155cba08f0666 ]

When performing a channel switch flow for a managed interface, the
flow did not update the bandwidth of the AP station and the rate
scale algorithm. In case of a channel width downgrade, this would
result with the rate scale algorithm using a bandwidth that does not
match the interface channel configuration.

Fix this by updating the AP station bandwidth and rate scaling algorithm
before the actual channel change in case of a bandwidth downgrade, or
after the actual channel change in case of a bandwidth upgrade.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/mlme.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e6f42d12222e..04e6280f4819 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -989,6 +989,10 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 	 */
 
 	if (sdata->reserved_chanctx) {
+		struct ieee80211_supported_band *sband = NULL;
+		struct sta_info *mgd_sta = NULL;
+		enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20;
+
 		/*
 		 * with multi-vif csa driver may call ieee80211_csa_finish()
 		 * many times while waiting for other interfaces to use their
@@ -997,6 +1001,48 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 		if (sdata->reserved_ready)
 			goto out;
 
+		if (sdata->vif.bss_conf.chandef.width !=
+		    sdata->csa_chandef.width) {
+			/*
+			 * For managed interface, we need to also update the AP
+			 * station bandwidth and align the rate scale algorithm
+			 * on the bandwidth change. Here we only consider the
+			 * bandwidth of the new channel definition (as channel
+			 * switch flow does not have the full HT/VHT/HE
+			 * information), assuming that if additional changes are
+			 * required they would be done as part of the processing
+			 * of the next beacon from the AP.
+			 */
+			switch (sdata->csa_chandef.width) {
+			case NL80211_CHAN_WIDTH_20_NOHT:
+			case NL80211_CHAN_WIDTH_20:
+			default:
+				bw = IEEE80211_STA_RX_BW_20;
+				break;
+			case NL80211_CHAN_WIDTH_40:
+				bw = IEEE80211_STA_RX_BW_40;
+				break;
+			case NL80211_CHAN_WIDTH_80:
+				bw = IEEE80211_STA_RX_BW_80;
+				break;
+			case NL80211_CHAN_WIDTH_80P80:
+			case NL80211_CHAN_WIDTH_160:
+				bw = IEEE80211_STA_RX_BW_160;
+				break;
+			}
+
+			mgd_sta = sta_info_get(sdata, ifmgd->bssid);
+			sband =
+				local->hw.wiphy->bands[sdata->csa_chandef.chan->band];
+		}
+
+		if (sdata->vif.bss_conf.chandef.width >
+		    sdata->csa_chandef.width) {
+			mgd_sta->sta.bandwidth = bw;
+			rate_control_rate_update(local, sband, mgd_sta,
+						 IEEE80211_RC_BW_CHANGED);
+		}
+
 		ret = ieee80211_vif_use_reserved_context(sdata);
 		if (ret) {
 			sdata_info(sdata,
@@ -1007,6 +1053,13 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 			goto out;
 		}
 
+		if (sdata->vif.bss_conf.chandef.width <
+		    sdata->csa_chandef.width) {
+			mgd_sta->sta.bandwidth = bw;
+			rate_control_rate_update(local, sband, mgd_sta,
+						 IEEE80211_RC_BW_CHANGED);
+		}
+
 		goto out;
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 20/23] mac80211: don't Tx a deauth frame if the AP forbade Tx

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 6c18b27d6e5c6a7206364eae2b47bc8d8b2fa68f ]

If the driver fails to properly prepare for the channel
switch, mac80211 will disconnect. If the CSA IE had mode
set to 1, it means that the clients are not allowed to send
any Tx on the current channel, and that includes the
deauthentication frame.

Make sure that we don't send the deauthentication frame in
this case.

In iwlwifi, this caused a failure to flush queues since the
firmware already closed the queues after having parsed the
CSA IE. Then mac80211 would wait until the deauthentication
frame would go out (drv_flush(drop=false)) and that would
never happen.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/mlme.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 04e6280f4819..39451c84c785 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1282,6 +1282,16 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 					 cbss->beacon_interval));
 	return;
  drop_connection:
+	/*
+	 * This is just so that the disconnect flow will know that
+	 * we were trying to switch channel and failed. In case the
+	 * mode is 1 (we are not allowed to Tx), we will know not to
+	 * send a deauthentication frame. Those two fields will be
+	 * reset when the disconnection worker runs.
+	 */
+	sdata->vif.csa_active = true;
+	sdata->csa_block_tx = csa_ie.mode;
+
 	ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
 	mutex_unlock(&local->chanctx_mtx);
 	mutex_unlock(&local->mtx);
@@ -2454,6 +2464,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+	bool tx;
 
 	sdata_lock(sdata);
 	if (!ifmgd->associated) {
@@ -2461,6 +2472,8 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
 		return;
 	}
 
+	tx = !sdata->csa_block_tx;
+
 	/* AP is probably out of range (or not reachable for another reason) so
 	 * remove the bss struct for that AP.
 	 */
@@ -2468,7 +2481,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
 
 	ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
 			       WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
-			       true, frame_buf);
+			       tx, frame_buf);
 	mutex_lock(&local->mtx);
 	sdata->vif.csa_active = false;
 	ifmgd->csa_waiting_bcn = false;
@@ -2479,7 +2492,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
 	}
 	mutex_unlock(&local->mtx);
 
-	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
+	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
 				    WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
 
 	sdata_unlock(sdata);
-- 
2.17.1

[PATCH AUTOSEL 4.9 21/23] mac80211: shorten the IBSS debug messages

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit c6e57b3896fc76299913b8cfd82d853bee8a2c84 ]

When tracing is enabled, all the debug messages are recorded and must
not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the
user with:

WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Workqueue: phy1 ieee80211_iface_work [mac80211]
 RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
 Call Trace:
  __sdata_dbg+0xbd/0x120 [mac80211]
  ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211]
  ieee80211_iface_work+0x21d/0x320 [mac80211]

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/ibss.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index a5acaf1efaab..0c0695eb2609 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -948,8 +948,8 @@ static void ieee80211_rx_mgmt_deauth_ibss(struct ieee80211_sub_if_data *sdata,
 	if (len < IEEE80211_DEAUTH_FRAME_LEN)
 		return;
 
-	ibss_dbg(sdata, "RX DeAuth SA=%pM DA=%pM BSSID=%pM (reason: %d)\n",
-		 mgmt->sa, mgmt->da, mgmt->bssid, reason);
+	ibss_dbg(sdata, "RX DeAuth SA=%pM DA=%pM\n", mgmt->sa, mgmt->da);
+	ibss_dbg(sdata, "\tBSSID=%pM (reason: %d)\n", mgmt->bssid, reason);
 	sta_info_destroy_addr(sdata, mgmt->sa);
 }
 
@@ -967,9 +967,9 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata,
 	auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
 	auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
 
-	ibss_dbg(sdata,
-		 "RX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=%d)\n",
-		 mgmt->sa, mgmt->da, mgmt->bssid, auth_transaction);
+	ibss_dbg(sdata, "RX Auth SA=%pM DA=%pM\n", mgmt->sa, mgmt->da);
+	ibss_dbg(sdata, "\tBSSID=%pM (auth_transaction=%d)\n",
+		 mgmt->bssid, auth_transaction);
 
 	if (auth_alg != WLAN_AUTH_OPEN || auth_transaction != 1)
 		return;
@@ -1176,10 +1176,10 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 		rx_timestamp = drv_get_tsf(local, sdata);
 	}
 
-	ibss_dbg(sdata,
-		 "RX beacon SA=%pM BSSID=%pM TSF=0x%llx BCN=0x%llx diff=%lld @%lu\n",
+	ibss_dbg(sdata, "RX beacon SA=%pM BSSID=%pM TSF=0x%llx\n",
 		 mgmt->sa, mgmt->bssid,
-		 (unsigned long long)rx_timestamp,
+		 (unsigned long long)rx_timestamp);
+	ibss_dbg(sdata, "\tBCN=0x%llx diff=%lld @%lu\n",
 		 (unsigned long long)beacon_timestamp,
 		 (unsigned long long)(rx_timestamp - beacon_timestamp),
 		 jiffies);
@@ -1538,9 +1538,9 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 
 	tx_last_beacon = drv_tx_last_beacon(local);
 
-	ibss_dbg(sdata,
-		 "RX ProbeReq SA=%pM DA=%pM BSSID=%pM (tx_last_beacon=%d)\n",
-		 mgmt->sa, mgmt->da, mgmt->bssid, tx_last_beacon);
+	ibss_dbg(sdata, "RX ProbeReq SA=%pM DA=%pM\n", mgmt->sa, mgmt->da);
+	ibss_dbg(sdata, "\tBSSID=%pM (tx_last_beacon=%d)\n",
+		 mgmt->bssid, tx_last_beacon);
 
 	if (!tx_last_beacon && is_multicast_ether_addr(mgmt->da))
 		return;
-- 
2.17.1

[PATCH AUTOSEL 4.9 23/23] tools/vm/page-types.c: fix "defined but not used" warning

[Sasha Levin]

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

[ Upstream commit 7ab660f8baecfe26c1c267fa8e64d2073feae2bb ]

debugfs_known_mountpoints[] is not used any more, so let's remove it.

Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/vm/page-types.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c
index e92903fc7113..6d5bcbaf6193 100644
--- a/tools/vm/page-types.c
+++ b/tools/vm/page-types.c
@@ -155,12 +155,6 @@ static const char * const page_flag_names[] = {
 };
 
 
-static const char * const debugfs_known_mountpoints[] = {
-	"/sys/kernel/debug",
-	"/debug",
-	0,
-};
-
 /*
  * data structures
  */
-- 
2.17.1

[PATCH AUTOSEL 4.9 22/23] tools/vm/slabinfo.c: fix sign-compare warning

[Sasha Levin]

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

[ Upstream commit 904506562e0856f2535d876407d087c9459d345b ]

Currently we get the following compiler warning:

    slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       if (s->object_size < min_objsize)
                          ^

due to the mismatch of signed/unsigned comparison.  ->object_size and
->slab_size are never expected to be negative, so let's define them as
unsigned int.

[n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative]
  Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp
Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/vm/slabinfo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/vm/slabinfo.c b/tools/vm/slabinfo.c
index b9d34b37c017..6975ec43913b 100644
--- a/tools/vm/slabinfo.c
+++ b/tools/vm/slabinfo.c
@@ -29,8 +29,8 @@ struct slabinfo {
 	int alias;
 	int refs;
 	int aliases, align, cache_dma, cpu_slabs, destroy_by_rcu;
-	int hwcache_align, object_size, objs_per_slab;
-	int sanity_checks, slab_size, store_user, trace;
+	unsigned int hwcache_align, object_size, objs_per_slab;
+	unsigned int sanity_checks, slab_size, store_user, trace;
 	int order, poison, reclaim_account, red_zone;
 	unsigned long partial, objects, slabs, objects_partial, objects_total;
 	unsigned long alloc_fastpath, alloc_slowpath;
-- 
2.17.1