* [PATCH v2 0/3] Add can support to RZ/G2M @ 2018-09-10 10:43 Fabrizio Castro 2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro 2018-09-27 10:45 ` [PATCH v2 0/3] Add can support to RZ/G2M Marc Kleine-Budde 0 siblings, 2 replies; 8+ messages in thread From: Fabrizio Castro @ 2018-09-10 10:43 UTC (permalink / raw) To: Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland Cc: Fabrizio Castro, David S. Miller, Sergei Shtylyov, Simon Horman, Magnus Damm, Chris Paterson, linux-can, netdev, devicetree, linux-renesas-soc, linux-kernel, Geert Uytterhoeven, Biju Das Dear All, this series contains all that's necessary to add CAN support for RZ/G2M (a.k.a. r8a774a1). v1-v2: * applied Geert's comments Thanks, Fab Chris Paterson (1): arm64: dts: renesas: r8a774a1: Add CAN nodes Fabrizio Castro (2): can: rcar_can: Fix erroneous registration dt-bindings: can: rcar_can: Add r8a774a1 support .../devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++----- arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++ drivers/net/can/rcar/rcar_can.c | 5 ++++- 3 files changed, 41 insertions(+), 6 deletions(-) -- 2.7.4 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support 2018-09-10 10:43 [PATCH v2 0/3] Add can support to RZ/G2M Fabrizio Castro @ 2018-09-10 10:43 ` Fabrizio Castro 2018-09-11 13:31 ` Simon Horman ` (2 more replies) 2018-09-27 10:45 ` [PATCH v2 0/3] Add can support to RZ/G2M Marc Kleine-Budde 1 sibling, 3 replies; 8+ messages in thread From: Fabrizio Castro @ 2018-09-10 10:43 UTC (permalink / raw) To: Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland Cc: Fabrizio Castro, David S. Miller, Sergei Shtylyov, linux-can, linux-kernel, netdev, devicetree, Simon Horman, Geert Uytterhoeven, Chris Paterson, Biju Das, linux-renesas-soc Document RZ/G2M (r8a774a1) SoC specific bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> --- v1->v2: * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description as per Geert's comments. This patch applies on top of next-20180910. Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 94a7f33..f3b160c 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -16,15 +17,21 @@ Required properties: "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 + compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic version. - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 + devices. + phandles and clock specifiers for 3 CAN clock inputs for every other + SoC. +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". + 3 clock input name strings for every other SoC: "clkp1", "clkp2", + "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". @@ -41,8 +48,9 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : Externally input clock + <0x1> : Peripheral clock (clkp2) (not supported by + RZ/G2 devices) + <0x3> : External input clock Example ------- -- 2.7.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support 2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro @ 2018-09-11 13:31 ` Simon Horman 2018-09-24 16:17 ` Rob Herring 2018-11-08 11:25 ` Fabrizio Castro 2 siblings, 0 replies; 8+ messages in thread From: Simon Horman @ 2018-09-11 13:31 UTC (permalink / raw) To: Fabrizio Castro Cc: Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland, David S. Miller, Sergei Shtylyov, linux-can, linux-kernel, netdev, devicetree, Geert Uytterhoeven, Chris Paterson, Biju Das, linux-renesas-soc On Mon, Sep 10, 2018 at 11:43:14AM +0100, Fabrizio Castro wrote: > Document RZ/G2M (r8a774a1) SoC specific bindings. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> > Reviewed-by: Biju Das <biju.das@bp.renesas.com> > --- > v1->v2: > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description > as per Geert's comments. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support 2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro 2018-09-11 13:31 ` Simon Horman @ 2018-09-24 16:17 ` Rob Herring 2018-11-08 11:25 ` Fabrizio Castro 2 siblings, 0 replies; 8+ messages in thread From: Rob Herring @ 2018-09-24 16:17 UTC (permalink / raw) To: Fabrizio Castro Cc: Wolfgang Grandegger, Marc Kleine-Budde, Mark Rutland, David S. Miller, Sergei Shtylyov, linux-can, linux-kernel, netdev, devicetree, Simon Horman, Geert Uytterhoeven, Chris Paterson, Biju Das, linux-renesas-soc On Mon, Sep 10, 2018 at 11:43:14AM +0100, Fabrizio Castro wrote: > Document RZ/G2M (r8a774a1) SoC specific bindings. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> > Reviewed-by: Biju Das <biju.das@bp.renesas.com> > --- > v1->v2: > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description > as per Geert's comments. > > This patch applies on top of next-20180910. > > Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- > 1 file changed, 13 insertions(+), 5 deletions(-) Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support 2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro 2018-09-11 13:31 ` Simon Horman 2018-09-24 16:17 ` Rob Herring @ 2018-11-08 11:25 ` Fabrizio Castro 2018-11-08 12:46 ` Simon Horman 2 siblings, 1 reply; 8+ messages in thread From: Fabrizio Castro @ 2018-11-08 11:25 UTC (permalink / raw) To: Fabrizio Castro, Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland Cc: David S. Miller, Sergei Shtylyov, linux-can, linux-kernel, netdev, devicetree, Simon Horman, Geert Uytterhoeven, Chris Paterson, Biju Das, linux-renesas-soc Dear All, Who is the best person to take this patch? Thanks, Fab > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > Sent: 10 September 2018 11:43 > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support > > Document RZ/G2M (r8a774a1) SoC specific bindings. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> > Reviewed-by: Biju Das <biju.das@bp.renesas.com> > --- > v1->v2: > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description > as per Geert's comments. > > This patch applies on top of next-20180910. > > Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- > 1 file changed, 13 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt > index 94a7f33..f3b160c 100644 > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings > Required properties: > - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. > "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. > + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. > "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. > "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. > "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. > @@ -16,15 +17,21 @@ Required properties: > "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. > "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 > compatible device. > - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. > + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 > + compatible device. > When compatible with the generic version, nodes must list the > SoC-specific version corresponding to the platform first > followed by the generic version. > > - reg: physical base address and size of the R-Car CAN register map. > - interrupts: interrupt specifier for the sole interrupt. > -- clocks: phandles and clock specifiers for 3 CAN clock inputs. > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 > + devices. > + phandles and clock specifiers for 3 CAN clock inputs for every other > + SoC. > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". > + 3 clock input name strings for every other SoC: "clkp1", "clkp2", > + "can_clk". > - pinctrl-0: pin control group to be used for this controller. > - pinctrl-names: must be "default". > > @@ -41,8 +48,9 @@ using the below properties: > Optional properties: > - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: > <0x0> (default) : Peripheral clock (clkp1) > - <0x1> : Peripheral clock (clkp2) > - <0x3> : Externally input clock > + <0x1> : Peripheral clock (clkp2) (not supported by > + RZ/G2 devices) > + <0x3> : External input clock > > Example > ------- > -- > 2.7.4 Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support 2018-11-08 11:25 ` Fabrizio Castro @ 2018-11-08 12:46 ` Simon Horman 2018-11-08 14:05 ` Fabrizio Castro 0 siblings, 1 reply; 8+ messages in thread From: Simon Horman @ 2018-11-08 12:46 UTC (permalink / raw) To: Fabrizio Castro Cc: Wolfgang Grandegger, Marc Kleine-Budde, Rob Herring, Mark Rutland, David S. Miller, Sergei Shtylyov, linux-can, linux-kernel, netdev, devicetree, Geert Uytterhoeven, Chris Paterson, Biju Das, linux-renesas-soc On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote: > Dear All, > > Who is the best person to take this patch? I believe this one is for Marc. > Thanks, > Fab > > > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > Sent: 10 September 2018 11:43 > > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support > > > > Document RZ/G2M (r8a774a1) SoC specific bindings. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com> > > --- > > v1->v2: > > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description > > as per Geert's comments. > > > > This patch applies on top of next-20180910. > > > > Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- > > 1 file changed, 13 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt > > index 94a7f33..f3b160c 100644 > > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt > > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt > > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings > > Required properties: > > - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. > > "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. > > + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. > > "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. > > "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. > > "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. > > @@ -16,15 +17,21 @@ Required properties: > > "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. > > "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 > > compatible device. > > - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. > > + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 > > + compatible device. > > When compatible with the generic version, nodes must list the > > SoC-specific version corresponding to the platform first > > followed by the generic version. > > > > - reg: physical base address and size of the R-Car CAN register map. > > - interrupts: interrupt specifier for the sole interrupt. > > -- clocks: phandles and clock specifiers for 3 CAN clock inputs. > > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". > > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 > > + devices. > > + phandles and clock specifiers for 3 CAN clock inputs for every other > > + SoC. > > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". > > + 3 clock input name strings for every other SoC: "clkp1", "clkp2", > > + "can_clk". > > - pinctrl-0: pin control group to be used for this controller. > > - pinctrl-names: must be "default". > > > > @@ -41,8 +48,9 @@ using the below properties: > > Optional properties: > > - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: > > <0x0> (default) : Peripheral clock (clkp1) > > - <0x1> : Peripheral clock (clkp2) > > - <0x3> : Externally input clock > > + <0x1> : Peripheral clock (clkp2) (not supported by > > + RZ/G2 devices) > > + <0x3> : External input clock > > > > Example > > ------- > > -- > > 2.7.4 > > > > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709. > ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support 2018-11-08 12:46 ` Simon Horman @ 2018-11-08 14:05 ` Fabrizio Castro 0 siblings, 0 replies; 8+ messages in thread From: Fabrizio Castro @ 2018-11-08 14:05 UTC (permalink / raw) To: Simon Horman, Marc Kleine-Budde, Rob Herring Cc: Wolfgang Grandegger, Mark Rutland, David S. Miller, Sergei Shtylyov, linux-can, linux-kernel, netdev, devicetree, Geert Uytterhoeven, Chris Paterson, Biju Das, linux-renesas-soc Thank you Simon for getting back to me. Marc, does this patch look ok to you? Thanks, Fab > Subject: Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support > > On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote: > > Dear All, > > > > Who is the best person to take this patch? > > I believe this one is for Marc. > > > Thanks, > > Fab > > > > > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > Sent: 10 September 2018 11:43 > > > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support > > > > > > Document RZ/G2M (r8a774a1) SoC specific bindings. > > > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com> > > > Reviewed-by: Biju Das <biju.das@bp.renesas.com> > > > --- > > > v1->v2: > > > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description > > > as per Geert's comments. > > > > > > This patch applies on top of next-20180910. > > > > > > Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- > > > 1 file changed, 13 insertions(+), 5 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt > b/Documentation/devicetree/bindings/net/can/rcar_can.txt > > > index 94a7f33..f3b160c 100644 > > > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt > > > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt > > > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings > > > Required properties: > > > - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. > > > "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. > > > + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. > > > "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. > > > "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. > > > "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. > > > @@ -16,15 +17,21 @@ Required properties: > > > "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. > > > "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 > > > compatible device. > > > - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. > > > + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 > > > + compatible device. > > > When compatible with the generic version, nodes must list the > > > SoC-specific version corresponding to the platform first > > > followed by the generic version. > > > > > > - reg: physical base address and size of the R-Car CAN register map. > > > - interrupts: interrupt specifier for the sole interrupt. > > > -- clocks: phandles and clock specifiers for 3 CAN clock inputs. > > > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". > > > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 > > > + devices. > > > + phandles and clock specifiers for 3 CAN clock inputs for every other > > > + SoC. > > > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". > > > + 3 clock input name strings for every other SoC: "clkp1", "clkp2", > > > + "can_clk". > > > - pinctrl-0: pin control group to be used for this controller. > > > - pinctrl-names: must be "default". > > > > > > @@ -41,8 +48,9 @@ using the below properties: > > > Optional properties: > > > - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: > > > <0x0> (default) : Peripheral clock (clkp1) > > > - <0x1> : Peripheral clock (clkp2) > > > - <0x3> : Externally input clock > > > + <0x1> : Peripheral clock (clkp2) (not supported by > > > + RZ/G2 devices) > > > + <0x3> : External input clock > > > > > > Example > > > ------- > > > -- > > > 2.7.4 > > > > > > > > > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England > & Wales under Registered No. 04586709. > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 0/3] Add can support to RZ/G2M 2018-09-10 10:43 [PATCH v2 0/3] Add can support to RZ/G2M Fabrizio Castro 2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro @ 2018-09-27 10:45 ` Marc Kleine-Budde 1 sibling, 0 replies; 8+ messages in thread From: Marc Kleine-Budde @ 2018-09-27 10:45 UTC (permalink / raw) To: Fabrizio Castro, Wolfgang Grandegger, Rob Herring, Mark Rutland Cc: David S. Miller, Sergei Shtylyov, Simon Horman, Magnus Damm, Chris Paterson, linux-can, netdev, devicetree, linux-renesas-soc, linux-kernel, Geert Uytterhoeven, Biju Das [-- Attachment #1.1: Type: text/plain, Size: 532 bytes --] On 09/10/2018 12:43 PM, Fabrizio Castro wrote: > Dear All, > > this series contains all that's necessary to add CAN support > for RZ/G2M (a.k.a. r8a774a1). > > v1-v2: > * applied Geert's comments Added 1/3 and 2/3 to linux-can. Tnx. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-11-08 14:05 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-09-10 10:43 [PATCH v2 0/3] Add can support to RZ/G2M Fabrizio Castro 2018-09-10 10:43 ` [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support Fabrizio Castro 2018-09-11 13:31 ` Simon Horman 2018-09-24 16:17 ` Rob Herring 2018-11-08 11:25 ` Fabrizio Castro 2018-11-08 12:46 ` Simon Horman 2018-11-08 14:05 ` Fabrizio Castro 2018-09-27 10:45 ` [PATCH v2 0/3] Add can support to RZ/G2M Marc Kleine-Budde
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).