[PATCH 4.4 00/70] 4.4.158-stable review

[PATCH 4.4 00/70] 4.4.158-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.158 release.
There are 70 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.158-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.158-rc1

Paul Burton <paul.burton@imgtec.com>
    MIPS: VDSO: Drop gic_get_usm_range() usage

Paul Burton <paul.burton@mips.com>
    MIPS: VDSO: Match data page cache colouring when D$ aliases

David Rivshin <drivshin@allworx.com>
    drivers: net: cpsw: fix segfault in case of bad phy-handle

Dan Carpenter <dan.carpenter@oracle.com>
    mei: bus: type promotion bug in mei_nfc_if_version()

Johan Hovold <johan@kernel.org>
    USB: serial: ti_usb_3410_5052: fix array underflow in completion handler

Douglas Anderson <dianders@chromium.org>
    pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant

Bart Van Assche <bart.vanassche@wdc.com>
    IB/nes: Fix a compiler warning

Dan Carpenter <dan.carpenter@oracle.com>
    drm/panel: type promotion bug in s6e8aa0_read_mtp_id()

John Stultz <john.stultz@linaro.org>
    selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress

Timo Wischer <twischer@de.adit-jv.com>
    ALSA: pcm: Fix snd_interval_refine first/last with open min/max

Zhouyang Jia <jiazhouyang09@gmail.com>
    rtc: bq4802: add error handling for devm_ioremap

Wei Lu <wei.lu2@amd.com>
    drm/amdkfd: Fix error codes in kfd_get_process

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    gpiolib: Mark gpio_suffixes array with __maybe_unused

Robin Murphy <robin.murphy@arm.com>
    coresight: tpiu: Fix disabling timeouts

Suzuki K Poulose <suzuki.poulose@arm.com>
    coresight: Handle errors in finding input/output ports

Julia Lawall <Julia.Lawall@lip6.fr>
    parport: sunbpp: fix error return code

Thierry Reding <treding@nvidia.com>
    drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping

Nicholas Mc Guire <hofrat@osadl.org>
    ARM: hisi: check of_iomap and fix missing of_node_put

Nicholas Mc Guire <hofrat@osadl.org>
    ARM: hisi: fix error handling and missing of_node_put

Nicholas Mc Guire <hofrat@osadl.org>
    ARM: hisi: handle of_iomap and fix missing of_node_put

Paul Burton <paul.burton@mips.com>
    MIPS: loongson64: cs5536: Fix PCI_OHCI_INT_REG reads

Jann Horn <jannh@google.com>
    mtdchar: fix overflows in adjustment of `count`

Ronny Chevalier <ronny.chevalier@hp.com>
    audit: fix use-after-free in audit_add_watch

Maciej W. Rozycki <macro@mips.com>
    binfmt_elf: Respect error return from `regset->active'

Dan Carpenter <dan.carpenter@oracle.com>
    CIFS: fix wrapping bugs in num_entries()

Dan Carpenter <dan.carpenter@oracle.com>
    cifs: prevent integer overflow in nxt_dir_entry()

Jia-Ju Bai <baijiaju1990@gmail.com>
    usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

Ben Hutchings <ben.hutchings@codethink.co.uk>
    USB: yurex: Fix buffer over-read in yurex_write()

Jia-Ju Bai <baijiaju1990@gmail.com>
    usb: misc: uss720: Fix two sleep-in-atomic-context bugs

Johan Hovold <johan@kernel.org>
    USB: serial: io_ti: fix array underflow in completion handler

Alan Stern <stern@rowland.harvard.edu>
    USB: net2280: Fix erroneous synchronization change

Maxence Duprès <xpros64@hotmail.fr>
    USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller

Jia-Ju Bai <baijiaju1990@gmail.com>
    usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()

Mathias Nyman <mathias.nyman@linux.intel.com>
    usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()

Tim Anderson <tsa@biglakesoftware.com>
    USB: Add quirk to support DJI CineSSD

Mathias Nyman <mathias.nyman@linux.intel.com>
    usb: Don't die twice if PCI xhci host is not responding in resume

Gustavo A. R. Silva <gustavo@embeddedor.com>
    misc: hmc6352: fix potential Spectre v1

K. Y. Srinivasan <kys@microsoft.com>
    Tools: hv: Fix a bug in the key delete code

Aaron Knister <aaron.s.knister@nasa.gov>
    IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler

Juergen Gross <jgross@suse.com>
    xen/netfront: fix waiting for xenbus state change

Bin Yang <bin.yang@intel.com>
    pstore: Fix incorrect persistent ram buffer mapping

Parav Pandit <parav@mellanox.com>
    RDMA/cma: Protect cma dev list with lock

Xiao Liang <xiliang@redhat.com>
    xen-netfront: fix warn message as irq device name has '/'

Michael Müller <michael@fds-team.de>
    crypto: sharah - Unregister correct algorithms for SAHARA 3

Randy Dunlap <rdunlap@infradead.org>
    platform/x86: toshiba_acpi: Fix defined but not used build warnings

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: reset layer2 attribute on layer switch

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix race in used-buffer accounting

Loic Poulain <loic.poulain@linaro.org>
    arm64: dts: qcom: db410c: Fix Bluetooth LED trigger

Vitaly Kuznetsov <vkuznets@redhat.com>
    xen-netfront: fix queue name setting

Manikanta Pubbisetty <mpubbise@codeaurora.org>
    mac80211: restrict delayed tailroom needed decrement

Paul Cercueil <paul@crapouillou.net>
    MIPS: jz4740: Bump zload address

Nicholas Piggin <npiggin@gmail.com>
    powerpc/powernv: opal_put_chars partial write fix

Sandipan Das <sandipan@linux.ibm.com>
    perf powerpc: Fix callchain ip filtering

Krzysztof Kozlowski <krzk@kernel.org>
    ARM: exynos: Clear global variable on init error path

Fredrik Noring <noring@nocrew.org>
    fbdev: Distinguish between interlaced and progressive modes

Sandipan Das <sandipan@linux.ibm.com>
    perf powerpc: Fix callchain ip filtering when return address is in a register

Randy Dunlap <rdunlap@infradead.org>
    fbdev/via: fix defined but not used warning

Anton Vasilyev <vasilyev@ispras.ru>
    video: goldfishfb: fix memory leak on driver remove

Dan Carpenter <dan.carpenter@oracle.com>
    fbdev: omapfb: off by one in omapfb_register_client()

Randy Dunlap <rdunlap@infradead.org>
    mtd/maps: fix solutionengine.c printk format warnings

Hans Verkuil <hverkuil@xs4all.nl>
    media: videobuf2-core: check for q->error in vb2_core_qbuf()

Felix Fietkau <nbd@nbd.name>
    MIPS: ath79: fix system restart

John Keeping <john@metanate.com>
    dmaengine: pl330: fix irq race with terminate_all

Masahiro Yamada <yamada.masahiro@socionext.com>
    kbuild: add .DELETE_ON_ERROR special target

Nicholas Mc Guire <hofrat@osadl.org>
    clk: imx6ul: fix missing of_node_put()

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Special-case rindex for gfs2_grow

YueHaibing <yuehaibing@huawei.com>
    xfrm: fix 'passing zero to ERR_PTR()' warning

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro

Takashi Iwai <tiwai@suse.de>
    ALSA: msnd: Fix the default sample sizes

Miao Zhong <zhongmiao@hisilicon.com>
    iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register


-------------

Diffstat:

 Makefile                                           |  4 +--
 arch/arm/mach-exynos/suspend.c                     |  1 +
 arch/arm/mach-hisi/hotplug.c                       | 41 ++++++++++++++--------
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          |  2 +-
 arch/mips/ath79/setup.c                            |  1 +
 arch/mips/include/asm/mach-ath79/ath79.h           |  1 +
 arch/mips/jz4740/Platform                          |  2 +-
 arch/mips/kernel/vdso.c                            | 35 ++++++++++++------
 arch/mips/loongson64/common/cs5536/cs5536_ohci.c   |  2 +-
 arch/powerpc/platforms/powernv/opal.c              |  2 +-
 drivers/clk/imx/clk-imx6ul.c                       |  1 +
 drivers/crypto/sahara.c                            |  4 +--
 drivers/dma/pl330.c                                |  5 +--
 drivers/gpio/gpiolib.h                             |  2 +-
 drivers/gpu/drm/amd/amdkfd/kfd_process.c           |  2 ++
 drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c | 13 +++++++
 drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c      |  2 +-
 drivers/hwtracing/coresight/coresight-tpiu.c       |  7 ++--
 drivers/hwtracing/coresight/coresight.c            |  7 ++--
 drivers/infiniband/core/cma.c                      | 12 ++++---
 drivers/infiniband/hw/nes/nes.h                    |  2 +-
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            |  2 ++
 drivers/iommu/arm-smmu-v3.c                        |  1 +
 drivers/media/v4l2-core/videobuf2-core.c           |  5 +++
 drivers/misc/hmc6352.c                             |  2 ++
 drivers/misc/mei/bus-fixup.c                       |  2 +-
 drivers/mtd/maps/solutionengine.c                  |  6 ++--
 drivers/mtd/mtdchar.c                              | 10 ++++--
 drivers/net/ethernet/ti/cpsw.c                     | 37 +++++++++++--------
 drivers/net/xen-netfront.c                         | 30 ++++++++--------
 drivers/parport/parport_sunbpp.c                   |  8 +++--
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           | 32 ++++++++++++-----
 drivers/platform/x86/toshiba_acpi.c                |  3 +-
 drivers/rtc/rtc-bq4802.c                           |  4 +++
 drivers/s390/net/qeth_core_main.c                  |  3 +-
 drivers/s390/net/qeth_core_sys.c                   |  1 +
 drivers/usb/class/cdc-wdm.c                        |  2 +-
 drivers/usb/core/hcd-pci.c                         |  2 --
 drivers/usb/core/message.c                         | 11 ++++++
 drivers/usb/core/quirks.c                          |  7 ++++
 drivers/usb/gadget/udc/net2280.c                   | 16 +++++++--
 drivers/usb/host/u132-hcd.c                        |  2 +-
 drivers/usb/misc/uss720.c                          |  4 +--
 drivers/usb/misc/yurex.c                           |  5 +--
 drivers/usb/serial/io_ti.h                         |  2 +-
 drivers/usb/serial/ti_usb_3410_5052.h              |  2 +-
 drivers/usb/storage/scsiglue.c                     |  9 +++++
 drivers/usb/storage/unusual_devs.h                 |  7 ++++
 drivers/video/fbdev/core/modedb.c                  | 41 ++++++++++++++++------
 drivers/video/fbdev/goldfishfb.c                   |  1 +
 drivers/video/fbdev/omap/omapfb_main.c             |  2 +-
 drivers/video/fbdev/via/viafbdev.c                 |  3 +-
 fs/binfmt_elf.c                                    |  2 +-
 fs/cifs/readdir.c                                  | 11 ++++--
 fs/cifs/smb2pdu.c                                  | 25 +++++++------
 fs/gfs2/bmap.c                                     |  2 +-
 fs/pstore/ram_core.c                               | 17 +++++++--
 kernel/audit_watch.c                               | 12 ++++++-
 net/mac80211/cfg.c                                 |  2 +-
 net/mac80211/key.c                                 | 24 ++++++++-----
 net/xfrm/xfrm_policy.c                             |  5 ++-
 scripts/Kbuild.include                             |  3 ++
 sound/core/pcm_lib.c                               | 14 +++++---
 sound/isa/msnd/msnd_pinnacle.c                     |  4 +--
 sound/usb/quirks-table.h                           |  3 +-
 tools/hv/hv_kvp_daemon.c                           |  2 +-
 tools/perf/arch/powerpc/util/skip-callchain-idx.c  | 10 ++++--
 tools/testing/selftests/timers/raw_skew.c          |  5 +++
 68 files changed, 389 insertions(+), 162 deletions(-)

[PATCH 4.4 01/70] iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miao Zhong <zhongmiao@hisilicon.com>

[ Upstream commit 0d535967ac658966c6ade8f82b5799092f7d5441 ]

When PRI queue occurs overflow, driver should update the OVACKFLG to
the PRIQ consumer register, otherwise subsequent PRI requests will not
be processed.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miao Zhong <zhongmiao@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/arm-smmu-v3.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1219,6 +1219,7 @@ static irqreturn_t arm_smmu_priq_thread(
 
 	/* Sync our overflow flag, as we believe we're up to speed */
 	q->cons = Q_OVF(q, q->prod) | Q_WRP(q, q->cons) | Q_IDX(q, q->cons);
+	writel(q->cons, q->cons_reg);
 	return IRQ_HANDLED;
 }
 

[PATCH 4.4 02/70] ALSA: msnd: Fix the default sample sizes

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 7c500f9ea139d0c9b80fdea5a9c911db3166ea54 ]

The default sample sizes set by msnd driver are bogus; it sets ALSA
PCM format, not the actual bit width.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/isa/msnd/msnd_pinnacle.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -82,10 +82,10 @@
 
 static void set_default_audio_parameters(struct snd_msnd *chip)
 {
-	chip->play_sample_size = DEFSAMPLESIZE;
+	chip->play_sample_size = snd_pcm_format_width(DEFSAMPLESIZE);
 	chip->play_sample_rate = DEFSAMPLERATE;
 	chip->play_channels = DEFCHANNELS;
-	chip->capture_sample_size = DEFSAMPLESIZE;
+	chip->capture_sample_size = snd_pcm_format_width(DEFSAMPLESIZE);
 	chip->capture_sample_rate = DEFSAMPLERATE;
 	chip->capture_channels = DEFCHANNELS;
 }

[PATCH 4.4 03/70] ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit bd1cd0eb2ce9141100628d476ead4de485501b29 ]

AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC()
for expanding idVendor and idProduct fields.  However, the latter
macro adds also match_flags and bInterfaceClass, which are different
from the values AU0828_DEVICE() macro sets after that.

For fixing them, just expand idVendor and idProduct fields manually in
AU0828_DEVICE().

This fixes sparse warnings like:
  sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks-table.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2875,7 +2875,8 @@ YAMAHA_DEVICE(0x7010, "UB99"),
  */
 
 #define AU0828_DEVICE(vid, pid, vname, pname) { \
-	USB_DEVICE_VENDOR_SPEC(vid, pid), \
+	.idVendor = vid, \
+	.idProduct = pid, \
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
 		       USB_DEVICE_ID_MATCH_INT_CLASS | \
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \

[PATCH 4.4 04/70] xfrm: fix passing zero to ERR_PTR() warning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 934ffce1343f22ed5e2d0bd6da4440f4848074de ]

Fix a static code checker warning:

  net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR'

xfrm_tmpl_resolve return 0 just means no xdst found, return NULL
instead of passing zero to ERR_PTR.

Fixes: d809ec895505 ("xfrm: do not assume that template resolving always returns xfrms")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/xfrm/xfrm_policy.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1845,7 +1845,10 @@ xfrm_resolve_and_create_bundle(struct xf
 	/* Try to instantiate a bundle */
 	err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family);
 	if (err <= 0) {
-		if (err != 0 && err != -EAGAIN)
+		if (err == 0)
+			return NULL;
+
+		if (err != -EAGAIN)
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR);
 		return ERR_PTR(err);
 	}

[PATCH 4.4 05/70] gfs2: Special-case rindex for gfs2_grow

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 776125785a87ff05d49938bd5b9f336f2a05bff6 ]

To speed up the common case of appending to a file,
gfs2_write_alloc_required presumes that writing beyond the end of a file
will always require additional blocks to be allocated.  This assumption
is incorrect for preallocates files, but there are no negative
consequences as long as *some* space is still left on the filesystem.

One special file that always has some space preallocated beyond the end
of the file is the rindex: when growing a filesystem, gfs2_grow adds one
or more new resource groups and appends records describing those
resource groups to the rindex; the preallocated space ensures that this
is always possible.

However, when a filesystem is completely full, gfs2_write_alloc_required
will indicate that an additional allocation is required, and appending
the next record to the rindex will fail even though space for that
record has already been preallocated.  To fix that, skip the incorrect
optimization in gfs2_write_alloc_required, but for the rindex only.
Other writes to preallocated space beyond the end of the file are still
allowed to fail on completely full filesystems.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/gfs2/bmap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1476,7 +1476,7 @@ int gfs2_write_alloc_required(struct gfs
 	end_of_file = (i_size_read(&ip->i_inode) + sdp->sd_sb.sb_bsize - 1) >> shift;
 	lblock = offset >> shift;
 	lblock_stop = (offset + len + sdp->sd_sb.sb_bsize - 1) >> shift;
-	if (lblock_stop > end_of_file)
+	if (lblock_stop > end_of_file && ip != GFS2_I(sdp->sd_rindex))
 		return 1;
 
 	size = (lblock_stop - lblock) << shift;

[PATCH 4.4 06/70] clk: imx6ul: fix missing of_node_put()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit 11177e7a7aaef95935592072985526ebf0a3df43 ]

of_find_compatible_node() is returning a device node with refcount
incremented and must be explicitly decremented after the last use
which is right after the us in of_iomap() here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 787b4271a6a0 ("clk: imx: add imx6ul clk tree support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/imx/clk-imx6ul.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -120,6 +120,7 @@ static void __init imx6ul_clocks_init(st
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!base);
 
 	clks[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));

[PATCH 4.4 07/70] kbuild: add .DELETE_ON_ERROR special target

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0 ]

If Make gets a fatal signal while a shell is executing, it may delete
the target file that the recipe was supposed to update.  This is needed
to make sure that it is remade from scratch when Make is next run; if
Make is interrupted after the recipe has begun to write the target file,
it results in an incomplete file whose time stamp is newer than that
of the prerequisites files.  Make automatically deletes the incomplete
file on interrupt unless the target is marked .PRECIOUS.

The situation is just the same as when the shell fails for some reasons.
Usually when a recipe line fails, if it has changed the target file at
all, the file is corrupted, or at least it is not completely updated.
Yet the file’s time stamp says that it is now up to date, so the next
time Make runs, it will not try to update that file.

However, Make does not cater to delete the incomplete target file in
this case.  We need to add .DELETE_ON_ERROR somewhere in the Makefile
to request it.

scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.

Please note .DELETE_ON_ERROR is not effective for phony targets.

The external module building should never ever touch the kernel tree.
The following recipe fails if include/generated/autoconf.h is missing.
However, include/config/auto.conf is not deleted since it is a phony
target.

 PHONY += include/config/auto.conf

 include/config/auto.conf:
         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
         echo >&2;                                                       \
         echo >&2 "  ERROR: Kernel configuration is invalid.";           \
         echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
         echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it."; \
         echo >&2 ;                                                      \
         /bin/false)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/Kbuild.include |    3 +++
 1 file changed, 3 insertions(+)

--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -359,3 +359,6 @@ endif
 endef
 #
 ###############################################################################
+
+# delete partially updated (i.e. corrupted) files on error
+.DELETE_ON_ERROR:

[PATCH 4.4 08/70] dmaengine: pl330: fix irq race with terminate_all

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Keeping <john@metanate.com>

[ Upstream commit e49756544a21f5625b379b3871d27d8500764670 ]

In pl330_update() when checking if a channel has been aborted, the
channel's lock is not taken, only the overall pl330_dmac lock.  But in
pl330_terminate_all() the aborted flag (req_running==-1) is set under
the channel lock and not the pl330_dmac lock.

With threaded interrupts, this leads to a potential race:

    pl330_terminate_all	        pl330_update
    -------------------         ------------
    lock channel
                                entry
    lock pl330
    _stop channel
    unlock pl330
                                lock pl330
                                check req_running != -1
    req_running = -1
                                _start channel

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/pl330.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2132,13 +2132,14 @@ static int pl330_terminate_all(struct dm
 
 	pm_runtime_get_sync(pl330->ddma.dev);
 	spin_lock_irqsave(&pch->lock, flags);
+
 	spin_lock(&pl330->lock);
 	_stop(pch->thread);
-	spin_unlock(&pl330->lock);
-
 	pch->thread->req[0].desc = NULL;
 	pch->thread->req[1].desc = NULL;
 	pch->thread->req_running = -1;
+	spin_unlock(&pl330->lock);
+
 	power_down = pch->active;
 	pch->active = false;
 

[PATCH 4.4 09/70] MIPS: ath79: fix system restart

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ]

This patch disables irq on reboot to fix hang issues that were observed
due to pending interrupts.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19913/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/ath79/setup.c                  |    1 +
 arch/mips/include/asm/mach-ath79/ath79.h |    1 +
 2 files changed, 2 insertions(+)

--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -44,6 +44,7 @@ static char ath79_sys_type[ATH79_SYS_TYP
 
 static void ath79_restart(char *command)
 {
+	local_irq_disable();
 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
 	for (;;)
 		if (cpu_wait)
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -133,6 +133,7 @@ static inline u32 ath79_pll_rr(unsigned
 static inline void ath79_reset_wr(unsigned reg, u32 val)
 {
 	__raw_writel(val, ath79_reset_base + reg);
+	(void) __raw_readl(ath79_reset_base + reg); /* flush */
 }
 
 static inline u32 ath79_reset_rr(unsigned reg)

[PATCH 4.4 10/70] media: videobuf2-core: check for q->error in vb2_core_qbuf()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit b509d733d337417bcb7fa4a35be3b9a49332b724 ]

The vb2_core_qbuf() function didn't check if q->error was set. It is
checked in __buf_prepare(), but that function isn't called if the buffer
was already prepared before with VIDIOC_PREPARE_BUF.

So check it at the start of vb2_core_qbuf() as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/videobuf2-core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -1366,6 +1366,11 @@ int vb2_core_qbuf(struct vb2_queue *q, u
 	struct vb2_buffer *vb;
 	int ret;
 
+	if (q->error) {
+		dprintk(1, "fatal error occurred on queue\n");
+		return -EIO;
+	}
+
 	vb = q->bufs[index];
 
 	switch (vb->state) {

[PATCH 4.4 11/70] mtd/maps: fix solutionengine.c printk format warnings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]

Fix 2 printk format warnings (this driver is currently only used by
arch/sh/) by using "%pap" instead of "%lx".

Fixes these build warnings:

../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps':
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                  ~~~~^
                                                  %08x
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                                    ~~~~^
                                                                    %08x

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/maps/solutionengine.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -59,9 +59,9 @@ static int __init init_soleng_maps(void)
 			return -ENXIO;
 		}
 	}
-	printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
-	       soleng_flash_map.phys & 0x1fffffff,
-	       soleng_eprom_map.phys & 0x1fffffff);
+	printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n",
+	       &soleng_flash_map.phys,
+	       &soleng_eprom_map.phys);
 	flash_mtd->owner = THIS_MODULE;
 
 	eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map);

[PATCH 4.4 12/70] fbdev: omapfb: off by one in omapfb_register_client()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5ec1ec35b2979b59d0b33381e7c9aac17e159d16 ]

The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the
> should be >= or we are one element beyond the end of the array.

Fixes: 8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/omap/omapfb_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/video/fbdev/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
@@ -977,7 +977,7 @@ int omapfb_register_client(struct omapfb
 {
 	int r;
 
-	if ((unsigned)omapfb_nb->plane_idx > OMAPFB_PLANE_NUM)
+	if ((unsigned)omapfb_nb->plane_idx >= OMAPFB_PLANE_NUM)
 		return -EINVAL;
 
 	if (!notifier_inited) {

[PATCH 4.4 13/70] video: goldfishfb: fix memory leak on driver remove

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 5958fde72d04e7b8c6de3669d1f794a90997e3eb ]

goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does
not have deallocation of fb, which leads to memory leak on probe/remove.

The patch adds deallocation into goldfish_fb_remove().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/goldfishfb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/video/fbdev/goldfishfb.c
+++ b/drivers/video/fbdev/goldfishfb.c
@@ -301,6 +301,7 @@ static int goldfish_fb_remove(struct pla
 	dma_free_coherent(&pdev->dev, framesize, (void *)fb->fb.screen_base,
 						fb->fb.fix.smem_start);
 	iounmap(fb->reg_base);
+	kfree(fb);
 	return 0;
 }
 

[PATCH 4.4 14/70] fbdev/via: fix defined but not used warning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit b6566b47a67e07fdca44cf51abb14e2fbe17d3eb ]

Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/via/viafbdev.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/video/fbdev/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/compiler.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -1468,7 +1469,7 @@ static const struct file_operations viaf
 
 #endif /* CONFIG_FB_VIA_DIRECT_PROCFS */
 
-static int viafb_sup_odev_proc_show(struct seq_file *m, void *v)
+static int __maybe_unused viafb_sup_odev_proc_show(struct seq_file *m, void *v)
 {
 	via_odev_to_seq(m, supported_odev_map[
 		viaparinfo->shared->chip_info.gfx_chip_name]);

[PATCH 4.4 15/70] perf powerpc: Fix callchain ip filtering when return address is in a register

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sandipan Das <sandipan@linux.ibm.com>

[ Upstream commit 9068533e4f470daf2b0f29c71d865990acd8826e ]

For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.

The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.

Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000015af20 <inet_pton>:
    15af20:       0b 00 4c 3c     addis   r2,r12,11
    15af24:       e0 c1 42 38     addi    r2,r2,-15904
    15af28:       a6 02 08 7c     mflr    r0
    15af2c:       f0 ff c1 fb     std     r30,-16(r1)
    15af30:       f8 ff e1 fb     std     r31,-8(r1)
    15af34:       78 1b 7f 7c     mr      r31,r3
    15af38:       78 23 83 7c     mr      r3,r4
    15af3c:       78 2b be 7c     mr      r30,r5
    15af40:       10 00 01 f8     std     r0,16(r1)
    15af44:       c1 ff 21 f8     stdu    r1,-64(r1)
    15af48:       28 00 81 f8     std     r4,40(r1)
  ...

  # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
  ...
  00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
     LOC           CFA      r30   r31   ra
  000000000015af20 r1+0     u     u     u
  000000000015af34 r1+0     c-16  c-8   r0
  000000000015af48 r1+64    c-16  c-8   c+16
  000000000015af5c r1+0     c-16  c-8   c+16
  000000000015af78 r1+0     u     u
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
  # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
  # perf script

Before:

  ping  2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
              7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
              7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 12f152d70 _init+0xbfc (/usr/bin/ping)
              7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  ping  2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
              7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
              7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
              7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 12f152d70 _init+0xbfc (/usr/bin/ping)
              7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/arch/powerpc/util/skip-callchain-idx.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c
+++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c
@@ -58,9 +58,13 @@ static int check_return_reg(int ra_regno
 	}
 
 	/*
-	 * Check if return address is on the stack.
+	 * Check if return address is on the stack. If return address
+	 * is in a register (typically R0), it is yet to be saved on
+	 * the stack.
 	 */
-	if (nops != 0 || ops != NULL)
+	if ((nops != 0 || ops != NULL) &&
+		!(nops == 1 && ops[0].atom == DW_OP_regx &&
+			ops[0].number2 == 0 && ops[0].offset == 0))
 		return 0;
 
 	/*

[PATCH 4.4 16/70] fbdev: Distinguish between interlaced and progressive modes

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fredrik Noring <noring@nocrew.org>

[ Upstream commit 1ba0a59cea41ea05fda92daaf2a2958a2246b9cf ]

I discovered the problem when developing a frame buffer driver for the
PlayStation 2 (not yet merged), using the following video modes for the
PlayStation 3 in drivers/video/fbdev/ps3fb.c:

    }, {
        /* 1080if */
        "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_INTERLACED
    }, {
        /* 1080pf */
        "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED
    },

In ps3fb_probe, the mode_option module parameter is used with fb_find_mode
but it can only select the interlaced variant of 1920x1080 since the loop
matching the modes does not take the difference between interlaced and
progressive modes into account.

In short, without the patch, progressive 1920x1080 cannot be chosen as a
mode_option parameter since fb_find_mode (falsely) thinks interlace is a
perfect match.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
[b.zolnierkie: updated patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/core/modedb.c |   41 +++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 11 deletions(-)

--- a/drivers/video/fbdev/core/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
@@ -644,7 +644,7 @@ static int fb_try_mode(struct fb_var_scr
  *
  *     Valid mode specifiers for @mode_option:
  *
- *     <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m] or
+ *     <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][p][m] or
  *     <name>[-<bpp>][@<refresh>]
  *
  *     with <xres>, <yres>, <bpp> and <refresh> decimal numbers and
@@ -653,10 +653,10 @@ static int fb_try_mode(struct fb_var_scr
  *      If 'M' is present after yres (and before refresh/bpp if present),
  *      the function will compute the timings using VESA(tm) Coordinated
  *      Video Timings (CVT).  If 'R' is present after 'M', will compute with
- *      reduced blanking (for flatpanels).  If 'i' is present, compute
- *      interlaced mode.  If 'm' is present, add margins equal to 1.8%
- *      of xres rounded down to 8 pixels, and 1.8% of yres. The char
- *      'i' and 'm' must be after 'M' and 'R'. Example:
+ *      reduced blanking (for flatpanels).  If 'i' or 'p' are present, compute
+ *      interlaced or progressive mode.  If 'm' is present, add margins equal
+ *      to 1.8% of xres rounded down to 8 pixels, and 1.8% of yres. The chars
+ *      'i', 'p' and 'm' must be after 'M' and 'R'. Example:
  *
  *      1024x768MR-8@60m - Reduced blank with margins at 60Hz.
  *
@@ -697,7 +697,8 @@ int fb_find_mode(struct fb_var_screeninf
 		unsigned int namelen = strlen(name);
 		int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
 		unsigned int xres = 0, yres = 0, bpp = default_bpp, refresh = 0;
-		int yres_specified = 0, cvt = 0, rb = 0, interlace = 0;
+		int yres_specified = 0, cvt = 0, rb = 0;
+		int interlace_specified = 0, interlace = 0;
 		int margins = 0;
 		u32 best, diff, tdiff;
 
@@ -748,9 +749,17 @@ int fb_find_mode(struct fb_var_screeninf
 				if (!cvt)
 					margins = 1;
 				break;
+			case 'p':
+				if (!cvt) {
+					interlace = 0;
+					interlace_specified = 1;
+				}
+				break;
 			case 'i':
-				if (!cvt)
+				if (!cvt) {
 					interlace = 1;
+					interlace_specified = 1;
+				}
 				break;
 			default:
 				goto done;
@@ -819,11 +828,21 @@ done:
 			if ((name_matches(db[i], name, namelen) ||
 			     (res_specified && res_matches(db[i], xres, yres))) &&
 			    !fb_try_mode(var, info, &db[i], bpp)) {
-				if (refresh_specified && db[i].refresh == refresh)
-					return 1;
+				const int db_interlace = (db[i].vmode &
+					FB_VMODE_INTERLACED ? 1 : 0);
+				int score = abs(db[i].refresh - refresh);
+
+				if (interlace_specified)
+					score += abs(db_interlace - interlace);
+
+				if (!interlace_specified ||
+				    db_interlace == interlace)
+					if (refresh_specified &&
+					    db[i].refresh == refresh)
+						return 1;
 
-				if (abs(db[i].refresh - refresh) < diff) {
-					diff = abs(db[i].refresh - refresh);
+				if (score < diff) {
+					diff = score;
 					best = i;
 				}
 			}

[PATCH 4.4 17/70] ARM: exynos: Clear global variable on init error path

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit cd4806911cee3901bc2b5eb95603cf1958720b57 ]

For most of Exynos SoCs, Power Management Unit (PMU) address space is
mapped into global variable 'pmu_base_addr' very early when initializing
PMU interrupt controller.  A lot of other machine code depends on it so
when doing iounmap() on this address, clear the global as well to avoid
usage of invalid value (pointing to unmapped memory region).

Properly mapped PMU address space is a requirement for all other machine
code so this fix is purely theoretical.  Boot will fail immediately in
many other places after following this error path.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-exynos/suspend.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -260,6 +260,7 @@ static int __init exynos_pmu_irq_init(st
 					  NULL);
 	if (!domain) {
 		iounmap(pmu_base_addr);
+		pmu_base_addr = NULL;
 		return -ENOMEM;
 	}
 

[PATCH 4.4 18/70] perf powerpc: Fix callchain ip filtering

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sandipan Das <sandipan@linux.ibm.com>

[ Upstream commit c715fcfda5a08edabaa15508742be926b7ee51db ]

For powerpc64, redundant entries in the callchain are filtered out by
determining the state of the return address and the stack frame using
DWARF debug information.

For making these filtering decisions we must analyze the debug
information for the location corresponding to the program counter value,
i.e. the first entry in the callchain, and not the LR value; otherwise,
perf may filter out either the second or the third entry in the
callchain incorrectly.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28).
         Return address is still in LR and a new stack frame is not yet
         allocated. The LR value, i.e. the second entry, should not be
	 filtered out.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000010eb10 <gaih_inet.constprop.7>:
  ...
    10fa48:       78 bb e4 7e     mr      r4,r23
    10fa4c:       0a 00 60 38     li      r3,10
    10fa50:       d9 b4 04 48     bl      15af28 <inet_pton+0x8>
    10fa54:       00 00 00 60     nop
    10fa58:       ac f4 ff 4b     b       10ef04 <gaih_inet.constprop.7+0x3f4>
  ...
  0000000000110450 <getaddrinfo>:
  ...
    1105a8:       54 00 ff 38     addi    r7,r31,84
    1105ac:       58 00 df 38     addi    r6,r31,88
    1105b0:       69 e5 ff 4b     bl      10eb18 <gaih_inet.constprop.7+0x8>
    1105b4:       78 1b 71 7c     mr      r17,r3
    1105b8:       50 01 7f e8     ld      r3,336(r31)
  ...
  000000000015af20 <inet_pton>:
    15af20:       0b 00 4c 3c     addis   r2,r12,11
    15af24:       e0 c1 42 38     addi    r2,r2,-15904
    15af28:       a6 02 08 7c     mflr    r0
    15af2c:       f0 ff c1 fb     std     r30,-16(r1)
    15af30:       f8 ff e1 fb     std     r31,-8(r1)
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8
  # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
  # perf script

Before:

  ping  4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
              7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
              7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 13fb52d70 _init+0xbfc (/usr/bin/ping)
              7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  ping  4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
              7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
              7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
              7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 13fb52d70 _init+0xbfc (/usr/bin/ping)
              7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10).
         Return address in still in LR and a new stack frame has already
         been allocated but not used. The caller's caller, i.e. the third
	 entry, is invalid and should be filtered out and not the second
	 one.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000009cd90 <_int_malloc>:
     9cd90:       17 00 4c 3c     addis   r2,r12,23
     9cd94:       70 a3 42 38     addi    r2,r2,-23696
     9cd98:       26 00 80 7d     mfcr    r12
     9cd9c:       f8 ff e1 fb     std     r31,-8(r1)
     9cda0:       17 00 e4 3b     addi    r31,r4,23
     9cda4:       d8 ff 61 fb     std     r27,-40(r1)
     9cda8:       78 23 9b 7c     mr      r27,r4
     9cdac:       1f 00 bf 2b     cmpldi  cr7,r31,31
     9cdb0:       f0 ff c1 fb     std     r30,-16(r1)
     9cdb4:       b0 ff c1 fa     std     r22,-80(r1)
     9cdb8:       78 1b 7e 7c     mr      r30,r3
     9cdbc:       08 00 81 91     stw     r12,8(r1)
     9cdc0:       11 ff 21 f8     stdu    r1,-240(r1)
     9cdc4:       4c 01 9d 41     bgt     cr7,9cf10 <_int_malloc+0x180>
     9cdc8:       20 00 a4 2b     cmpldi  cr7,r4,32
  ...
     9cf08:       00 00 00 60     nop
     9cf0c:       00 00 42 60     ori     r2,r2,0
     9cf10:       e4 06 ff 7b     rldicr  r31,r31,0,59
     9cf14:       40 f8 a4 7f     cmpld   cr7,r4,r31
     9cf18:       68 05 9d 41     bgt     cr7,9d480 <_int_malloc+0x6f0>
  ...
  000000000009e3c0 <tcache_init.part.4>:
  ...
     9e420:       40 02 80 38     li      r4,576
     9e424:       78 fb e3 7f     mr      r3,r31
     9e428:       71 e9 ff 4b     bl      9cd98 <_int_malloc+0x8>
     9e42c:       00 00 a3 2f     cmpdi   cr7,r3,0
     9e430:       78 1b 7e 7c     mr      r30,r3
  ...
  000000000009f7a0 <__libc_malloc>:
  ...
     9f8f8:       00 00 89 2f     cmpwi   cr7,r9,0
     9f8fc:       1c ff 9e 40     bne     cr7,9f818 <__libc_malloc+0x78>
     9f900:       c9 ea ff 4b     bl      9e3c8 <tcache_init.part.4+0x8>
     9f904:       00 00 00 60     nop
     9f908:       e8 90 22 e9     ld      r9,-28440(r2)
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180
  # perf record -e probe_libc:_int_malloc -g ./test-malloc
  # perf script

Before:

  test-malloc  6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
              7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
              7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so)
              7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
              7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
                  100006b4 main+0x38 (/home/testuser/test-malloc)
              7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  test-malloc  6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
              7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
              7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so)
              7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
              7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
                  100006b4 main+0x38 (/home/sandipan/test-malloc)
              7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info")
Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/arch/powerpc/util/skip-callchain-idx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c
+++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c
@@ -250,7 +250,7 @@ int arch_skip_callchain_idx(struct threa
 	if (!chain || chain->nr < 3)
 		return skip_slot;
 
-	ip = chain->ips[2];
+	ip = chain->ips[1];
 
 	thread__find_addr_location(thread, PERF_RECORD_MISC_USER,
 			MAP__FUNCTION, ip, &al);

[PATCH 4.4 19/70] powerpc/powernv: opal_put_chars partial write fix

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit bd90284cc6c1c9e8e48c8eadd0c79574fcce0b81 ]

The intention here is to consume and discard the remaining buffer
upon error. This works if there has not been a previous partial write.
If there has been, then total_len is no longer total number of bytes
to copy. total_len is always "bytes left to copy", so it should be
added to written bytes.

This code may not be exercised any more if partial writes will not be
hit, but this is a small bugfix before a larger change.

Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/platforms/powernv/opal.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -371,7 +371,7 @@ int opal_put_chars(uint32_t vtermno, con
 		/* Closed or other error drop */
 		if (rc != OPAL_SUCCESS && rc != OPAL_BUSY &&
 		    rc != OPAL_BUSY_EVENT) {
-			written = total_len;
+			written += total_len;
 			break;
 		}
 		if (rc == OPAL_SUCCESS) {

[PATCH 4.4 20/70] MIPS: jz4740: Bump zload address

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit c6ea7e9747318e5a6774995f4f8e3e0f7c0fa8ba ]

Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.

This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.

To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.

This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19787/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/jz4740/Platform |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/jz4740/Platform
+++ b/arch/mips/jz4740/Platform
@@ -1,4 +1,4 @@
 platform-$(CONFIG_MACH_INGENIC)	+= jz4740/
 cflags-$(CONFIG_MACH_INGENIC)	+= -I$(srctree)/arch/mips/include/asm/mach-jz4740
 load-$(CONFIG_MACH_INGENIC)	+= 0xffffffff80010000
-zload-$(CONFIG_MACH_INGENIC)	+= 0xffffffff80600000
+zload-$(CONFIG_MACH_INGENIC)	+= 0xffffffff81000000

[PATCH 4.4 21/70] mac80211: restrict delayed tailroom needed decrement

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manikanta Pubbisetty <mpubbise@codeaurora.org>

[ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ]

As explained in ieee80211_delayed_tailroom_dec(), during roam,
keys of the old AP will be destroyed and new keys will be
installed. Deletion of the old key causes
crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key
installation causes a transition from 0 to 1.

Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1,
we invoke synchronize_net(); the reason for doing this is to avoid
a race in the TX path as explained in increment_tailroom_need_count().
This synchronize_net() operation can be slow and can affect the station
roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt
is delayed for a while so that upon installation of new key the
transition would be from 1 to 2 instead of 0 to 1 and thereby
improving the roam time.

This is all correct for a STA iftype, but deferring the tailroom_needed
decrement for other iftypes may be unnecessary.

For example, let's consider the case of a 4-addr client connecting to
an AP for which AP_VLAN interface is also created, let the initial
value for tailroom_needed on the AP be 1.

* 4-addr client connects to the AP (AP: tailroom_needed = 1)
* AP will clear old keys, delay decrement of tailroom_needed count
* AP_VLAN is created, it takes the tailroom count from master
  (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1)
* Install new key for the station, assume key is plumbed in the HW,
  there won't be any change in tailroom_needed count on AP iface
* Delayed decrement of tailroom_needed count on AP
  (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)

Because of the delayed decrement on AP iface, tailroom_needed count goes
out of sync between AP(master iface) and AP_VLAN(slave iface) and
there would be unnecessary tailroom created for the packets going
through AP_VLAN iface.

Also, WARN_ONs were observed while trying to bring down the AP_VLAN
interface:
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4)
(ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850)
(ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c)
(ieee80211_stop) (__dev_close_many+0x94/0xb8)
(__dev_close_many) (dev_close_many+0x5c/0xc8)

Restricting delayed decrement to station interface alone fixes the problem
and it makes sense to do so because delayed decrement is done to improve
roam time which is applicable only for client devices.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/cfg.c |    2 +-
 net/mac80211/key.c |   24 +++++++++++++++---------
 2 files changed, 16 insertions(+), 10 deletions(-)

--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -286,7 +286,7 @@ static int ieee80211_del_key(struct wiph
 		goto out_unlock;
 	}
 
-	ieee80211_key_free(key, true);
+	ieee80211_key_free(key, sdata->vif.type == NL80211_IFTYPE_STATION);
 
 	ret = 0;
  out_unlock:
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -647,11 +647,15 @@ int ieee80211_key_link(struct ieee80211_
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_key *old_key;
-	int idx, ret;
-	bool pairwise;
-
-	pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
-	idx = key->conf.keyidx;
+	int idx = key->conf.keyidx;
+	bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
+	/*
+	 * We want to delay tailroom updates only for station - in that
+	 * case it helps roaming speed, but in other cases it hurts and
+	 * can cause warnings to appear.
+	 */
+	bool delay_tailroom = sdata->vif.type == NL80211_IFTYPE_STATION;
+	int ret;
 
 	mutex_lock(&sdata->local->key_mtx);
 
@@ -679,14 +683,14 @@ int ieee80211_key_link(struct ieee80211_
 	increment_tailroom_need_count(sdata);
 
 	ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
-	ieee80211_key_destroy(old_key, true);
+	ieee80211_key_destroy(old_key, delay_tailroom);
 
 	ieee80211_debugfs_key_add(key);
 
 	if (!local->wowlan) {
 		ret = ieee80211_key_enable_hw_accel(key);
 		if (ret)
-			ieee80211_key_free(key, true);
+			ieee80211_key_free(key, delay_tailroom);
 	} else {
 		ret = 0;
 	}
@@ -874,7 +878,8 @@ void ieee80211_free_sta_keys(struct ieee
 		ieee80211_key_replace(key->sdata, key->sta,
 				key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE,
 				key, NULL);
-		__ieee80211_key_destroy(key, true);
+		__ieee80211_key_destroy(key, key->sdata->vif.type ==
+					NL80211_IFTYPE_STATION);
 	}
 
 	for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
@@ -884,7 +889,8 @@ void ieee80211_free_sta_keys(struct ieee
 		ieee80211_key_replace(key->sdata, key->sta,
 				key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE,
 				key, NULL);
-		__ieee80211_key_destroy(key, true);
+		__ieee80211_key_destroy(key, key->sdata->vif.type ==
+					NL80211_IFTYPE_STATION);
 	}
 
 	mutex_unlock(&local->key_mtx);

[PATCH 4.4 22/70] xen-netfront: fix queue name setting

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 2d408c0d4574b01b9ed45e02516888bf925e11a9 ]

Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and
open") changed the initialization order: xennet_create_queues() now
happens before we do register_netdev() so using netdev->name in
xennet_init_queue() is incorrect, we end up with the following in
/proc/interrupts:

 60:        139          0   xen-dyn    -event     eth%d-q0-tx
 61:        265          0   xen-dyn    -event     eth%d-q0-rx
 62:        234          0   xen-dyn    -event     eth%d-q1-tx
 63:          1          0   xen-dyn    -event     eth%d-q1-rx

and this looks ugly. Actually, using early netdev name (even when it's
already set) is also not ideal: nowadays we tend to rename eth devices
and queue name may end up not corresponding to the netdev name.

Use nodename from xenbus device for queue naming: this can't change in VM's
lifetime. Now /proc/interrupts looks like

 62:        202          0   xen-dyn    -event     device/vif/0-q0-tx
 63:        317          0   xen-dyn    -event     device/vif/0-q0-rx
 64:        262          0   xen-dyn    -event     device/vif/0-q1-tx
 65:         17          0   xen-dyn    -event     device/vif/0-q1-rx

Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netfront.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1616,7 +1616,7 @@ static int xennet_init_queue(struct netf
 		    (unsigned long)queue);
 
 	snprintf(queue->name, sizeof(queue->name), "%s-q%u",
-		 queue->info->netdev->name, queue->id);
+		 queue->info->xbdev->nodename, queue->id);
 
 	/* Initialise tx_skbs as a free chain containing every entry. */
 	queue->tx_skb_freelist = 0;

[PATCH 4.4 23/70] arm64: dts: qcom: db410c: Fix Bluetooth LED trigger

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit e53db018315b7660bb7000a29e79faff2496c2c2 ]

Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.

Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -105,7 +105,7 @@
 			led@6 {
 				label = "apq8016-sbc:blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "bt";
+				linux,default-trigger = "bluetooth-power";
 				default-state = "off";
 			};
 		};

[PATCH 4.4 24/70] s390/qeth: fix race in used-buffer accounting

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit a702349a4099cd5a7bab0904689d8e0bf8dcd622 ]

By updating q->used_buffers only _after_ do_QDIO() has completed, there
is a potential race against the buffer's TX completion. In the unlikely
case that the TX completion path wins, qeth_qdio_output_handler() would
decrement the counter before qeth_flush_buffers() even incremented it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3505,13 +3505,14 @@ static void qeth_flush_buffers(struct qe
 	qdio_flags = QDIO_FLAG_SYNC_OUTPUT;
 	if (atomic_read(&queue->set_pci_flags_count))
 		qdio_flags |= QDIO_FLAG_PCI_OUT;
+	atomic_add(count, &queue->used_buffers);
+
 	rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags,
 		     queue->queue_no, index, count);
 	if (queue->card->options.performance_stats)
 		queue->card->perf_stats.outbound_do_qdio_time +=
 			qeth_get_micros() -
 			queue->card->perf_stats.outbound_do_qdio_start_time;
-	atomic_add(count, &queue->used_buffers);
 	if (rc) {
 		queue->card->stats.tx_errors += count;
 		/* ignore temporary SIGA errors without busy condition */

[PATCH 4.4 25/70] s390/qeth: reset layer2 attribute on layer switch

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 70551dc46ffa3555a0b5f3545b0cd87ab67fd002 ]

After the subdriver's remove() routine has completed, the card's layer
mode is undetermined again. Reflect this in the layer2 field.

If qeth_dev_layer2_store() hits an error after remove() was called, the
card _always_ requires a setup(), even if the previous layer mode is
requested again.
But qeth_dev_layer2_store() bails out early if the requested layer mode
still matches the current one. So unless we reset the layer2 field,
re-probing the card back to its previous mode is currently not possible.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_sys.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -419,6 +419,7 @@ static ssize_t qeth_dev_layer2_store(str
 	if (card->discipline) {
 		card->discipline->remove(card->gdev);
 		qeth_core_free_discipline(card);
+		card->options.layer2 = -1;
 	}
 
 	rc = qeth_core_load_discipline(card, newdis);

[PATCH 4.4 26/70] platform/x86: toshiba_acpi: Fix defined but not used build warnings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ]

Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Azael Avalos <coproscefalo@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/toshiba_acpi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -34,6 +34,7 @@
 #define TOSHIBA_ACPI_VERSION	"0.23"
 #define PROC_INTERFACE_VERSION	1
 
+#include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -1472,7 +1473,7 @@ static const struct file_operations keys
 	.write		= keys_proc_write,
 };
 
-static int version_proc_show(struct seq_file *m, void *v)
+static int __maybe_unused version_proc_show(struct seq_file *m, void *v)
 {
 	seq_printf(m, "driver:                  %s\n", TOSHIBA_ACPI_VERSION);
 	seq_printf(m, "proc_interface:          %d\n", PROC_INTERFACE_VERSION);

[PATCH 4.4 27/70] crypto: sharah - Unregister correct algorithms for SAHARA 3

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Müller <michael@fds-team.de>

[ Upstream commit 0e7d4d932ffc23f75efb31a8c2ac2396c1b81c55 ]

This patch fixes two typos related to unregistering algorithms supported by
SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered
in case of an error. In sahara_unregister_algs the wrong array is used to
determine the iteration count.

Signed-off-by: Michael Müller <michael@fds-team.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/sahara.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/crypto/sahara.c
+++ b/drivers/crypto/sahara.c
@@ -1363,7 +1363,7 @@ err_sha_v4_algs:
 
 err_sha_v3_algs:
 	for (j = 0; j < k; j++)
-		crypto_unregister_ahash(&sha_v4_algs[j]);
+		crypto_unregister_ahash(&sha_v3_algs[j]);
 
 err_aes_algs:
 	for (j = 0; j < i; j++)
@@ -1379,7 +1379,7 @@ static void sahara_unregister_algs(struc
 	for (i = 0; i < ARRAY_SIZE(aes_algs); i++)
 		crypto_unregister_alg(&aes_algs[i]);
 
-	for (i = 0; i < ARRAY_SIZE(sha_v4_algs); i++)
+	for (i = 0; i < ARRAY_SIZE(sha_v3_algs); i++)
 		crypto_unregister_ahash(&sha_v3_algs[i]);
 
 	if (dev->version > SAHARA_VERSION_3)

[PATCH 4.4 28/70] xen-netfront: fix warn message as irq device name has /

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiao Liang <xiliang@redhat.com>

[ Upstream commit 21f2706b20100bb3db378461ab9b8e2035309b5b ]

There is a call trace generated after commit 2d408c0d4574b01b9ed45e02516888bf925e11a9(
xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found
under /proc/irq/xx/.

This patch only picks up device type and id as its name.

With the patch, now /proc/interrupts looks like below and the warning message gone:
 70:         21          0          0          0   xen-dyn    -event     vif0-q0-tx
 71:         15          0          0          0   xen-dyn    -event     vif0-q0-rx
 72:         14          0          0          0   xen-dyn    -event     vif0-q1-tx
 73:         33          0          0          0   xen-dyn    -event     vif0-q1-rx
 74:         12          0          0          0   xen-dyn    -event     vif0-q2-tx
 75:         24          0          0          0   xen-dyn    -event     vif0-q2-rx
 76:         19          0          0          0   xen-dyn    -event     vif0-q3-tx
 77:         21          0          0          0   xen-dyn    -event     vif0-q3-rx

Below is call trace information without this patch:

name 'device/vif/0-q0-tx'
WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0
RIP: 0010:__xlate_proc_name+0x85/0xa0
RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930
RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229
R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98
R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0
Call Trace:
__proc_create+0x45/0x230
? snprintf+0x49/0x60
proc_mkdir_data+0x35/0x90
register_handler_proc+0xef/0x110
? proc_register+0xfc/0x110
? proc_create_data+0x70/0xb0
__setup_irq+0x39b/0x660
? request_threaded_irq+0xad/0x160
request_threaded_irq+0xf5/0x160
? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront]
bind_evtchn_to_irqhandler+0x3d/0x70
? xenbus_alloc_evtchn+0x41/0xa0
netback_changed+0xa46/0xcda [xen_netfront]
? find_watch+0x40/0x40
xenwatch_thread+0xc5/0x160
? finish_wait+0x80/0x80
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f
---[ end trace 650e5561b0caab3a ]---

Signed-off-by: Xiao Liang <xiliang@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netfront.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1608,6 +1608,7 @@ static int xennet_init_queue(struct netf
 {
 	unsigned short i;
 	int err = 0;
+	char *devid;
 
 	spin_lock_init(&queue->tx_lock);
 	spin_lock_init(&queue->rx_lock);
@@ -1615,8 +1616,9 @@ static int xennet_init_queue(struct netf
 	setup_timer(&queue->rx_refill_timer, rx_refill_timeout,
 		    (unsigned long)queue);
 
-	snprintf(queue->name, sizeof(queue->name), "%s-q%u",
-		 queue->info->xbdev->nodename, queue->id);
+	devid = strrchr(queue->info->xbdev->nodename, '/') + 1;
+	snprintf(queue->name, sizeof(queue->name), "vif%s-q%u",
+		 devid, queue->id);
 
 	/* Initialise tx_skbs as a free chain containing every entry. */
 	queue->tx_skb_freelist = 0;

[PATCH 4.4 29/70] RDMA/cma: Protect cma dev list with lock

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Parav Pandit <parav@mellanox.com>

commit 954a8e3aea87e896e320cf648c1a5bbe47de443e upstream.

When AF_IB addresses are used during rdma_resolve_addr() a lock is not
held. A cma device can get removed while list traversal is in progress
which may lead to crash. ie

        CPU0                                     CPU1
        ====                                     ====
rdma_resolve_addr()
 cma_resolve_ib_dev()
  list_for_each()                         cma_remove_one()
    cur_dev->device                        mutex_lock(&lock)
                                            list_del();
                                           mutex_unlock(&lock);
                                           cma_process_remove();


Therefore, hold a lock while traversing the list which avoids such
situation.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/cma.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -544,6 +544,7 @@ static int cma_resolve_ib_dev(struct rdm
 	dgid = (union ib_gid *) &addr->sib_addr;
 	pkey = ntohs(addr->sib_pkey);
 
+	mutex_lock(&lock);
 	list_for_each_entry(cur_dev, &dev_list, list) {
 		for (p = 1; p <= cur_dev->device->phys_port_cnt; ++p) {
 			if (!rdma_cap_af_ib(cur_dev->device, p))
@@ -567,18 +568,19 @@ static int cma_resolve_ib_dev(struct rdm
 					cma_dev = cur_dev;
 					sgid = gid;
 					id_priv->id.port_num = p;
+					goto found;
 				}
 			}
 		}
 	}
-
-	if (!cma_dev)
-		return -ENODEV;
+	mutex_unlock(&lock);
+	return -ENODEV;
 
 found:
 	cma_attach_to_dev(id_priv, cma_dev);
-	addr = (struct sockaddr_ib *) cma_src_addr(id_priv);
-	memcpy(&addr->sib_addr, &sgid, sizeof sgid);
+	mutex_unlock(&lock);
+	addr = (struct sockaddr_ib *)cma_src_addr(id_priv);
+	memcpy(&addr->sib_addr, &sgid, sizeof(sgid));
 	cma_translate_ib(addr, &id_priv->id.route.addr.dev_addr);
 	return 0;
 }

[PATCH 4.4 30/70] pstore: Fix incorrect persistent ram buffer mapping

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bin Yang <bin.yang@intel.com>

commit 831b624df1b420c8f9281ed1307a8db23afb72df upstream.

persistent_ram_vmap() returns the page start vaddr.
persistent_ram_iomap() supports non-page-aligned mapping.

persistent_ram_buffer_map() always adds offset-in-page to the vaddr
returned from these two functions, which causes incorrect mapping of
non-page-aligned persistent ram buffer.

By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without
this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which
might not be page aligned. If the offset-in-page > 2048, the vaddr will be
in next page. If the next page is not mapped, it will cause kernel panic:

[    0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000
...
[    0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f
...
[    0.075000] Call Trace:
[    0.075000]  ramoops_init_przs.part.10.constprop.15+0x105/0x260
[    0.075000]  ramoops_probe+0x232/0x3a0
[    0.075000]  platform_drv_probe+0x3e/0xa0
[    0.075000]  driver_probe_device+0x2cd/0x400
[    0.075000]  __driver_attach+0xe4/0x110
[    0.075000]  ? driver_probe_device+0x400/0x400
[    0.075000]  bus_for_each_dev+0x70/0xa0
[    0.075000]  driver_attach+0x1e/0x20
[    0.075000]  bus_add_driver+0x159/0x230
[    0.075000]  ? do_early_param+0x95/0x95
[    0.075000]  driver_register+0x70/0xc0
[    0.075000]  ? init_pstore_fs+0x4d/0x4d
[    0.075000]  __platform_driver_register+0x36/0x40
[    0.075000]  ramoops_init+0x12f/0x131
[    0.075000]  do_one_initcall+0x4d/0x12c
[    0.075000]  ? do_early_param+0x95/0x95
[    0.075000]  kernel_init_freeable+0x19b/0x222
[    0.075000]  ? rest_init+0xbb/0xbb
[    0.075000]  kernel_init+0xe/0xfc
[    0.075000]  ret_from_fork+0x3a/0x50

Signed-off-by: Bin Yang <bin.yang@intel.com>
[kees: add comments describing the mapping differences, updated commit log]
Fixes: 24c3d2f342ed ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/ram_core.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -378,7 +378,12 @@ static void *persistent_ram_vmap(phys_ad
 	vaddr = vmap(pages, page_count, VM_MAP, prot);
 	kfree(pages);
 
-	return vaddr;
+	/*
+	 * Since vmap() uses page granularity, we must add the offset
+	 * into the page here, to get the byte granularity address
+	 * into the mapping to represent the actual "start" location.
+	 */
+	return vaddr + offset_in_page(start);
 }
 
 static void *persistent_ram_iomap(phys_addr_t start, size_t size,
@@ -397,6 +402,11 @@ static void *persistent_ram_iomap(phys_a
 	else
 		va = ioremap_wc(start, size);
 
+	/*
+	 * Since request_mem_region() and ioremap() are byte-granularity
+	 * there is no need handle anything special like we do when the
+	 * vmap() case in persistent_ram_vmap() above.
+	 */
 	return va;
 }
 
@@ -417,7 +427,7 @@ static int persistent_ram_buffer_map(phy
 		return -ENOMEM;
 	}
 
-	prz->buffer = prz->vaddr + offset_in_page(start);
+	prz->buffer = prz->vaddr;
 	prz->buffer_size = size - sizeof(struct persistent_ram_buffer);
 
 	return 0;
@@ -464,7 +474,8 @@ void persistent_ram_free(struct persiste
 
 	if (prz->vaddr) {
 		if (pfn_valid(prz->paddr >> PAGE_SHIFT)) {
-			vunmap(prz->vaddr);
+			/* We must vunmap() at page-granularity. */
+			vunmap(prz->vaddr - offset_in_page(prz->paddr));
 		} else {
 			iounmap(prz->vaddr);
 			release_mem_region(prz->paddr, prz->size);

[PATCH 4.4 31/70] xen/netfront: fix waiting for xenbus state change

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juergen Gross <jgross@suse.com>

commit 8edfe2e992b75aee3da9316e9697c531194c2f53 upstream.

Commit 822fb18a82aba ("xen-netfront: wait xenbus state change when load
module manually") added a new wait queue to wait on for a state change
when the module is loaded manually. Unfortunately there is no wakeup
anywhere to stop that waiting.

Instead of introducing a new wait queue rename the existing
module_unload_q to module_wq and use it for both purposes (loading and
unloading).

As any state change of the backend might be intended to stop waiting
do the wake_up_all() in any case when netback_changed() is called.

Fixes: 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually")
Cc: <stable@vger.kernel.org> #4.18
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/xen-netfront.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -86,8 +86,7 @@ struct netfront_cb {
 /* IRQ name is queue name with "-tx" or "-rx" appended */
 #define IRQ_NAME_SIZE (QUEUE_NAME_SIZE + 3)
 
-static DECLARE_WAIT_QUEUE_HEAD(module_load_q);
-static DECLARE_WAIT_QUEUE_HEAD(module_unload_q);
+static DECLARE_WAIT_QUEUE_HEAD(module_wq);
 
 struct netfront_stats {
 	u64			packets;
@@ -1336,11 +1335,11 @@ static struct net_device *xennet_create_
 	netif_carrier_off(netdev);
 
 	xenbus_switch_state(dev, XenbusStateInitialising);
-	wait_event(module_load_q,
-			   xenbus_read_driver_state(dev->otherend) !=
-			   XenbusStateClosed &&
-			   xenbus_read_driver_state(dev->otherend) !=
-			   XenbusStateUnknown);
+	wait_event(module_wq,
+		   xenbus_read_driver_state(dev->otherend) !=
+		   XenbusStateClosed &&
+		   xenbus_read_driver_state(dev->otherend) !=
+		   XenbusStateUnknown);
 	return netdev;
 
  exit:
@@ -2025,15 +2024,14 @@ static void netback_changed(struct xenbu
 
 	dev_dbg(&dev->dev, "%s\n", xenbus_strstate(backend_state));
 
+	wake_up_all(&module_wq);
+
 	switch (backend_state) {
 	case XenbusStateInitialising:
 	case XenbusStateInitialised:
 	case XenbusStateReconfiguring:
 	case XenbusStateReconfigured:
-		break;
-
 	case XenbusStateUnknown:
-		wake_up_all(&module_unload_q);
 		break;
 
 	case XenbusStateInitWait:
@@ -2049,12 +2047,10 @@ static void netback_changed(struct xenbu
 		break;
 
 	case XenbusStateClosed:
-		wake_up_all(&module_unload_q);
 		if (dev->state == XenbusStateClosed)
 			break;
 		/* Missed the backend's CLOSING state -- fallthrough */
 	case XenbusStateClosing:
-		wake_up_all(&module_unload_q);
 		xenbus_frontend_closed(dev);
 		break;
 	}
@@ -2162,14 +2158,14 @@ static int xennet_remove(struct xenbus_d
 
 	if (xenbus_read_driver_state(dev->otherend) != XenbusStateClosed) {
 		xenbus_switch_state(dev, XenbusStateClosing);
-		wait_event(module_unload_q,
+		wait_event(module_wq,
 			   xenbus_read_driver_state(dev->otherend) ==
 			   XenbusStateClosing ||
 			   xenbus_read_driver_state(dev->otherend) ==
 			   XenbusStateUnknown);
 
 		xenbus_switch_state(dev, XenbusStateClosed);
-		wait_event(module_unload_q,
+		wait_event(module_wq,
 			   xenbus_read_driver_state(dev->otherend) ==
 			   XenbusStateClosed ||
 			   xenbus_read_driver_state(dev->otherend) ==

[PATCH 4.4 32/70] IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Knister <aaron.s.knister@nasa.gov>

commit 816e846c2eb9129a3e0afa5f920c8bbc71efecaa upstream.

Inside of start_xmit() the call to check if the connection is up and the
queueing of the packets for later transmission is not atomic which leaves
a window where cm_rep_handler can run, set the connection up, dequeue
pending packets and leave the subsequently queued packets by start_xmit()
sitting on neigh->queue until they're dropped when the connection is torn
down. This only applies to connected mode. These dropped packets can
really upset TCP, for example, and cause multi-minute delays in
transmission for open connections.

Here's the code in start_xmit where we check to see if the connection is
up:

       if (ipoib_cm_get(neigh)) {
               if (ipoib_cm_up(neigh)) {
                       ipoib_cm_send(dev, skb, ipoib_cm_get(neigh));
                       goto unref;
               }
       }

The race occurs if cm_rep_handler execution occurs after the above
connection check (specifically if it gets to the point where it acquires
priv->lock to dequeue pending skb's) but before the below code snippet in
start_xmit where packets are queued.

       if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
               push_pseudo_header(skb, phdr->hwaddr);
               spin_lock_irqsave(&priv->lock, flags);
               __skb_queue_tail(&neigh->queue, skb);
               spin_unlock_irqrestore(&priv->lock, flags);
       } else {
               ++dev->stats.tx_dropped;
               dev_kfree_skb_any(skb);
       }

The patch acquires the netif tx lock in cm_rep_handler for the section
where it sets the connection up and dequeues and retransmits deferred
skb's.

Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/ipoib/ipoib_cm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -992,12 +992,14 @@ static int ipoib_cm_rep_handler(struct i
 
 	skb_queue_head_init(&skqueue);
 
+	netif_tx_lock_bh(p->dev);
 	spin_lock_irq(&priv->lock);
 	set_bit(IPOIB_FLAG_OPER_UP, &p->flags);
 	if (p->neigh)
 		while ((skb = __skb_dequeue(&p->neigh->queue)))
 			__skb_queue_tail(&skqueue, skb);
 	spin_unlock_irq(&priv->lock);
+	netif_tx_unlock_bh(p->dev);
 
 	while ((skb = __skb_dequeue(&skqueue))) {
 		skb->dev = p->dev;

[PATCH 4.4 33/70] Tools: hv: Fix a bug in the key delete code

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: K. Y. Srinivasan <kys@microsoft.com>

commit 86503bd35dec0ce363e9fdbf5299927422ed3899 upstream.

Fix a bug in the key delete code - the num_records range
from 0 to num_records-1.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/hv/hv_kvp_daemon.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -286,7 +286,7 @@ static int kvp_key_delete(int pool, cons
 		 * Found a match; just move the remaining
 		 * entries up.
 		 */
-		if (i == num_records) {
+		if (i == (num_records - 1)) {
 			kvp_file_info[pool].num_records--;
 			kvp_update_file(pool);
 			return 0;

[PATCH 4.4 34/70] misc: hmc6352: fix potential Spectre v1

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit de916736aaaadddbd6061472969f667b14204aa9 upstream.

val is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue
'map' [r]

Fix this by sanitizing val before using it to index map

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/hmc6352.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/misc/hmc6352.c
+++ b/drivers/misc/hmc6352.c
@@ -27,6 +27,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/sysfs.h>
+#include <linux/nospec.h>
 
 static DEFINE_MUTEX(compass_mutex);
 
@@ -50,6 +51,7 @@ static int compass_store(struct device *
 		return ret;
 	if (val >= strlen(map))
 		return -EINVAL;
+	val = array_index_nospec(val, strlen(map));
 	mutex_lock(&compass_mutex);
 	ret = compass_command(c, map[val]);
 	mutex_unlock(&compass_mutex);

[PATCH 4.4 35/70] usb: Dont die twice if PCI xhci host is not responding in resume

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit f3dc41c5d22b2ca14a0802a65d8cdc33a3882d4e upstream.

usb_hc_died() should only be called once, and with the primary HCD
as parameter. It will mark both primary and secondary hcd's dead.

Remove the extra call to usb_cd_died with the shared hcd as parameter.

Fixes: ff9d78b36f76 ("USB: Set usb_hcd->state and flags for shared roothubs")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hcd-pci.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -529,8 +529,6 @@ static int resume_common(struct device *
 				event == PM_EVENT_RESTORE);
 		if (retval) {
 			dev_err(dev, "PCI post-resume error %d!\n", retval);
-			if (hcd->shared_hcd)
-				usb_hc_died(hcd->shared_hcd);
 			usb_hc_died(hcd);
 		}
 	}

[PATCH 4.4 36/70] USB: Add quirk to support DJI CineSSD

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tim Anderson <tsa@biglakesoftware.com>

commit f45681f9becaa65111ed0a691ccf080a0cd5feb8 upstream.

This device does not correctly handle the LPM operations.

Also, the device cannot handle ATA pass-through commands
and locks up when attempted while running in super speed.

This patch adds the equivalent quirk logic as found in uas.

Signed-off-by: Tim Anderson <tsa@biglakesoftware.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c          |    3 +++
 drivers/usb/storage/scsiglue.c     |    9 +++++++++
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 3 files changed, 19 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -259,6 +259,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x2040, 0x7200), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* DJI CineSSD */
+	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -341,6 +341,15 @@ static int queuecommand_lck(struct scsi_
 		return 0;
 	}
 
+	if ((us->fflags & US_FL_NO_ATA_1X) &&
+			(srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
+		memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
+		       sizeof(usb_stor_sense_invalidCDB));
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		done(srb);
+		return 0;
+	}
+
 	/* enqueue the command and wake up the control thread */
 	srb->scsi_done = done;
 	us->srb = srb;
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2213,6 +2213,13 @@ UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x
 		"Micro Mini 1GB",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
+/* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */
+UNUSUAL_DEV(  0x2ca3, 0x0031, 0x0000, 0x9999,
+		"DJI",
+		"CineSSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /*
  * Nick Bowler <nbowler@elliptictech.com>
  * SCSI stack spams (otherwise harmless) error messages.

[PATCH 4.4 37/70] usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit f9a5b4f58b280c1d26255376713c132f93837621 upstream.

The steps taken by usb core to set a new interface is very different from
what is done on the xHC host side.

xHC hardware will do everything in one go. One command is used to set up
new endpoints, free old endpoints, check bandwidth, and run the new
endpoints.

All this is done by xHC when usb core asks the hcd to check for
available bandwidth. At this point usb core has not yet flushed the old
endpoints, which will cause use-after-free issues in xhci driver as
queued URBs are cancelled on a re-allocated endpoint.

To resolve this add a call to usb_disable_interface() which will flush
the endpoints before calling usb_hcd_alloc_bandwidth()

Additional checks in xhci driver will also be implemented to gracefully
handle stale URB cancel on freed and re-allocated endpoints

Cc: <stable@vger.kernel.org>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/message.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1282,6 +1282,11 @@ void usb_enable_interface(struct usb_dev
  * is submitted that needs that bandwidth.  Some other operating systems
  * allocate bandwidth early, when a configuration is chosen.
  *
+ * xHCI reserves bandwidth and configures the alternate setting in
+ * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting
+ * may be disabled. Drivers cannot rely on any particular alternate
+ * setting being in effect after a failure.
+ *
  * This call is synchronous, and may not be used in an interrupt context.
  * Also, drivers must not change altsettings while urbs are scheduled for
  * endpoints in that interface; all such urbs must first be completed
@@ -1317,6 +1322,12 @@ int usb_set_interface(struct usb_device
 			 alternate);
 		return -EINVAL;
 	}
+	/*
+	 * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth,
+	 * including freeing dropped endpoint ring buffers.
+	 * Make sure the interface endpoints are flushed before that
+	 */
+	usb_disable_interface(dev, iface, false);
 
 	/* Make sure we have enough bandwidth for this alternate interface.
 	 * Remove the current alt setting and add the new alt setting.

[PATCH 4.4 38/70] usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jia-Ju Bai <baijiaju1990@gmail.com>

commit 6d4f268fa132742fe96dad22307c68d237356d88 upstream.

i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function
for the USB driver. So it should not sleep, but it is can sleep
according to the function call paths (from bottom to top) in Linux-4.16.

[FUNC] msleep
drivers/usb/host/u132-hcd.c, 2558:
	msleep in u132_get_frame
drivers/usb/core/hcd.c, 2231:
	[FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number
drivers/usb/core/usb.c, 822:
	usb_hcd_get_frame_number in usb_get_current_frame_number
sound/usb/usx2y/usbusx2yaudio.c, 303:
	usb_get_current_frame_number in i_usX2Y_urb_complete
sound/usb/usx2y/usbusx2yaudio.c, 366:
	i_usX2Y_urb_complete in i_usX2Y_subs_startup

Note that [FUNC_PTR] means a function pointer call is used.

To fix this bug, msleep() is replaced with mdelay().

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/u132-hcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2565,7 +2565,7 @@ static int u132_get_frame(struct usb_hcd
 	} else {
 		int frame = 0;
 		dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n");
-		msleep(100);
+		mdelay(100);
 		return frame;
 	}
 }

[PATCH 4.4 39/70] USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxence Duprès <xpros64@hotmail.fr>

commit 9b83a1c301ad6d24988a128c69b42cbaaf537d82 upstream.

WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
cause a -EPROTO error, a communication restart and loop again.

This issue has already been fixed for KS25.
https://lore.kernel.org/patchwork/patch/753077/

I just add device 201 for KS49 in quirks.c to get it works.

Signed-off-by: Laurent Roux <xpros64@hotmail.fr>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -37,6 +37,10 @@ static const struct usb_device_id usb_qu
 	/* CBM - Flash disk */
 	{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */
+	{ USB_DEVICE(0x0218, 0x0201), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* WORLDE easy key (easykey.25) MIDI controller  */
 	{ USB_DEVICE(0x0218, 0x0401), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

[PATCH 4.4 40/70] USB: net2280: Fix erroneous synchronization change

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit dec3c23c9aa1815f07d98ae0375b4cbc10971e13 upstream.

Commit f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking
for callbacks") was based on a serious misunderstanding.  It
introduced regressions into both the dummy-hcd and net2280 drivers.

The problem in dummy-hcd was fixed by commit 7dbd8f4cabd9 ("USB:
dummy-hcd: Fix erroneous synchronization change"), but the problem in
net2280 remains.  Namely: the ->disconnect(), ->suspend(), ->resume(),
and ->reset() callbacks must be invoked without the private lock held;
otherwise a deadlock will occur when the callback routine tries to
interact with the UDC driver.

This patch largely is a reversion of the relevant parts of
f16443a034c7.  It also drops the private lock around the calls to
->suspend() and ->resume() (something the earlier patch forgot to do).
This is safe from races with device interrupts because it occurs
within the interrupt handler.

Finally, the patch changes where the ->disconnect() callback is
invoked when net2280_pullup() turns the pullup off.  Rather than
making the callback from within stop_activity() at a time when dropping
the private lock could be unsafe, the callback is moved to a point
after the lock has already been dropped.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks")
Reported-by: D. Ziesche <dziesche@zes.com>
Tested-by: D. Ziesche <dziesche@zes.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/udc/net2280.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1542,11 +1542,14 @@ static int net2280_pullup(struct usb_gad
 		writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl);
 	} else {
 		writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl);
-		stop_activity(dev, dev->driver);
+		stop_activity(dev, NULL);
 	}
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	if (!is_on && dev->driver)
+		dev->driver->disconnect(&dev->gadget);
+
 	return 0;
 }
 
@@ -2425,8 +2428,11 @@ static void stop_activity(struct net2280
 		nuke(&dev->ep[i]);
 
 	/* report disconnect; the driver is already quiesced */
-	if (driver)
+	if (driver) {
+		spin_unlock(&dev->lock);
 		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
 
 	usb_reinit(dev);
 }
@@ -3272,6 +3278,8 @@ next_endpoints:
 		BIT(PCI_RETRY_ABORT_INTERRUPT))
 
 static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
+__releases(dev->lock)
+__acquires(dev->lock)
 {
 	struct net2280_ep	*ep;
 	u32			tmp, num, mask, scratch;
@@ -3312,12 +3320,14 @@ static void handle_stat1_irqs(struct net
 			if (disconnect || reset) {
 				stop_activity(dev, dev->driver);
 				ep0_start(dev);
+				spin_unlock(&dev->lock);
 				if (reset)
 					usb_gadget_udc_reset
 						(&dev->gadget, dev->driver);
 				else
 					(dev->driver->disconnect)
 						(&dev->gadget);
+				spin_lock(&dev->lock);
 				return;
 			}
 		}
@@ -3336,6 +3346,7 @@ static void handle_stat1_irqs(struct net
 	tmp = BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT);
 	if (stat & tmp) {
 		writel(tmp, &dev->regs->irqstat1);
+		spin_unlock(&dev->lock);
 		if (stat & BIT(SUSPEND_REQUEST_INTERRUPT)) {
 			if (dev->driver->suspend)
 				dev->driver->suspend(&dev->gadget);
@@ -3346,6 +3357,7 @@ static void handle_stat1_irqs(struct net
 				dev->driver->resume(&dev->gadget);
 			/* at high speed, note erratum 0133 */
 		}
+		spin_lock(&dev->lock);
 		stat &= ~tmp;
 	}
 

[PATCH 4.4 41/70] USB: serial: io_ti: fix array underflow in completion handler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 691a03cfe8ca483f9c48153b869d354e4ae3abef upstream.

As reported by Dan Carpenter, a malicious USB device could set
port_number to a negative value and we would underflow the port array in
the interrupt completion handler.

As these devices only have one or two ports, fix this by making sure we
only consider the seventh bit when determining the port number (and
ignore bits 0xb0 which are typically set to 0x30).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_ti.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/io_ti.h
+++ b/drivers/usb/serial/io_ti.h
@@ -178,7 +178,7 @@ struct ump_interrupt {
 }  __attribute__((packed));
 
 
-#define TIUMP_GET_PORT_FROM_CODE(c)	(((c) >> 4) - 3)
+#define TIUMP_GET_PORT_FROM_CODE(c)	(((c) >> 6) & 0x01)
 #define TIUMP_GET_FUNC_FROM_CODE(c)	((c) & 0x0f)
 #define TIUMP_INTERRUPT_CODE_LSR	0x03
 #define TIUMP_INTERRUPT_CODE_MSR	0x04

[PATCH 4.4 42/70] usb: misc: uss720: Fix two sleep-in-atomic-context bugs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jia-Ju Bai <baijiaju1990@gmail.com>

commit bc8acc214d3f1cafebcbcd101a695bbac716595d upstream.

async_complete() in uss720.c is a completion handler function for the
USB driver. So it should not sleep, but it is can sleep according to the
function call paths (from bottom to top) in Linux-4.16.

[FUNC] set_1284_register(GFP_KERNEL)
drivers/usb/misc/uss720.c, 372:
  set_1284_register in parport_uss720_frob_control
drivers/parport/ieee1284.c, 560:
  [FUNC_PTR]parport_uss720_frob_control in parport_ieee1284_ack_data_avail
drivers/parport/ieee1284.c, 577:
  parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt
./include/linux/parport.h, 474:
  parport_ieee1284_interrupt in parport_generic_irq
drivers/usb/misc/uss720.c, 116:
  parport_generic_irq in async_complete

[FUNC] get_1284_register(GFP_KERNEL)
drivers/usb/misc/uss720.c, 382:
  get_1284_register in parport_uss720_read_status
drivers/parport/ieee1284.c, 555:
  [FUNC_PTR]parport_uss720_read_status in parport_ieee1284_ack_data_avail
drivers/parport/ieee1284.c, 577:
  parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt
./include/linux/parport.h, 474:
  parport_ieee1284_interrupt in parport_generic_irq
drivers/usb/misc/uss720.c, 116:
  parport_generic_irq in async_complete

Note that [FUNC_PTR] means a function pointer call is used.

To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC.

These bugs are found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/uss720.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -388,7 +388,7 @@ static unsigned char parport_uss720_frob
 	mask &= 0x0f;
 	val &= 0x0f;
 	d = (priv->reg[1] & (~mask)) ^ val;
-	if (set_1284_register(pp, 2, d, GFP_KERNEL))
+	if (set_1284_register(pp, 2, d, GFP_ATOMIC))
 		return 0;
 	priv->reg[1] = d;
 	return d & 0xf;
@@ -398,7 +398,7 @@ static unsigned char parport_uss720_read
 {
 	unsigned char ret;
 
-	if (get_1284_register(pp, 1, &ret, GFP_KERNEL))
+	if (get_1284_register(pp, 1, &ret, GFP_ATOMIC))
 		return 0;
 	return ret & 0xf8;
 }

[PATCH 4.4 43/70] USB: yurex: Fix buffer over-read in yurex_write()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben.hutchings@codethink.co.uk>

commit 7e10f14ebface44a48275c8d6dc1caae3668d5a9 upstream.

If the written data starts with a digit, yurex_write() tries to parse
it as an integer using simple_strtoull().  This requires a null-
terminator, and currently there's no guarantee that there is one.

(The sample program at
https://github.com/NeoCat/YUREX-driver-for-Linux/blob/master/sample/yurex_clock.pl
writes an integer without a null terminator.  It seems like it must
have worked by chance!)

Always add a null byte after the written data.  Enlarge the buffer
to allow for this.

Cc: stable@vger.kernel.org
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/yurex.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -439,13 +439,13 @@ static ssize_t yurex_write(struct file *
 {
 	struct usb_yurex *dev;
 	int i, set = 0, retval = 0;
-	char buffer[16];
+	char buffer[16 + 1];
 	char *data = buffer;
 	unsigned long long c, c2 = 0;
 	signed long timeout = 0;
 	DEFINE_WAIT(wait);
 
-	count = min(sizeof(buffer), count);
+	count = min(sizeof(buffer) - 1, count);
 	dev = file->private_data;
 
 	/* verify that we actually have some data to write */
@@ -464,6 +464,7 @@ static ssize_t yurex_write(struct file *
 		retval = -EFAULT;
 		goto error;
 	}
+	buffer[count] = 0;
 	memset(dev->cntl_buffer, CMD_PADDING, YUREX_BUF_SIZE);
 
 	switch (buffer[0]) {

[PATCH 4.4 44/70] usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jia-Ju Bai <baijiaju1990@gmail.com>

commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream.

wdm_in_callback() is a completion handler function for the USB driver.
So it should not sleep. But it calls service_outstanding_interrupt(),
which calls usb_submit_urb() with GFP_KERNEL.

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-wdm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -453,7 +453,7 @@ static int clear_wdm_read_flag(struct wd
 
 	set_bit(WDM_RESPONDING, &desc->flags);
 	spin_unlock_irq(&desc->iuspin);
-	rv = usb_submit_urb(desc->response, GFP_KERNEL);
+	rv = usb_submit_urb(desc->response, GFP_ATOMIC);
 	spin_lock_irq(&desc->iuspin);
 	if (rv) {
 		dev_err(&desc->intf->dev,

[PATCH 4.4 45/70] cifs: prevent integer overflow in nxt_dir_entry()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 8ad8aa353524d89fa2e09522f3078166ff78ec42 upstream.

The "old_entry + le32_to_cpu(pDirInfo->NextEntryOffset)" can wrap
around so I have added a check for integer overflow.

Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/readdir.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -373,8 +373,15 @@ static char *nxt_dir_entry(char *old_ent
 
 		new_entry = old_entry + sizeof(FIND_FILE_STANDARD_INFO) +
 				pfData->FileNameLength;
-	} else
-		new_entry = old_entry + le32_to_cpu(pDirInfo->NextEntryOffset);
+	} else {
+		u32 next_offset = le32_to_cpu(pDirInfo->NextEntryOffset);
+
+		if (old_entry + next_offset < old_entry) {
+			cifs_dbg(VFS, "invalid offset %u\n", next_offset);
+			return NULL;
+		}
+		new_entry = old_entry + next_offset;
+	}
 	cifs_dbg(FYI, "new entry %p old entry %p\n", new_entry, old_entry);
 	/* validate that new_entry is not past end of SMB */
 	if (new_entry >= end_of_smb) {

[PATCH 4.4 46/70] CIFS: fix wrapping bugs in num_entries()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 56446f218af1133c802dad8e9e116f07f381846c upstream.

The problem is that "entryptr + next_offset" and "entryptr + len + size"
can wrap.  I ended up changing the type of "entryptr" because it makes
the math easier when we don't have to do so much casting.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2402,33 +2402,38 @@ num_entries(char *bufstart, char *end_of
 	int len;
 	unsigned int entrycount = 0;
 	unsigned int next_offset = 0;
-	FILE_DIRECTORY_INFO *entryptr;
+	char *entryptr;
+	FILE_DIRECTORY_INFO *dir_info;
 
 	if (bufstart == NULL)
 		return 0;
 
-	entryptr = (FILE_DIRECTORY_INFO *)bufstart;
+	entryptr = bufstart;
 
 	while (1) {
-		entryptr = (FILE_DIRECTORY_INFO *)
-					((char *)entryptr + next_offset);
-
-		if ((char *)entryptr + size > end_of_buf) {
+		if (entryptr + next_offset < entryptr ||
+		    entryptr + next_offset > end_of_buf ||
+		    entryptr + next_offset + size > end_of_buf) {
 			cifs_dbg(VFS, "malformed search entry would overflow\n");
 			break;
 		}
 
-		len = le32_to_cpu(entryptr->FileNameLength);
-		if ((char *)entryptr + len + size > end_of_buf) {
+		entryptr = entryptr + next_offset;
+		dir_info = (FILE_DIRECTORY_INFO *)entryptr;
+
+		len = le32_to_cpu(dir_info->FileNameLength);
+		if (entryptr + len < entryptr ||
+		    entryptr + len > end_of_buf ||
+		    entryptr + len + size > end_of_buf) {
 			cifs_dbg(VFS, "directory entry name would overflow frame end of buf %p\n",
 				 end_of_buf);
 			break;
 		}
 
-		*lastentry = (char *)entryptr;
+		*lastentry = entryptr;
 		entrycount++;
 
-		next_offset = le32_to_cpu(entryptr->NextEntryOffset);
+		next_offset = le32_to_cpu(dir_info->NextEntryOffset);
 		if (!next_offset)
 			break;
 	}

[PATCH 4.4 47/70] binfmt_elf: Respect error return from `regset->active

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Maciej W. Rozycki" <macro@mips.com>

[ Upstream commit 2f819db565e82e5f73cd42b39925098986693378 ]

The regset API documented in <linux/regset.h> defines -ENODEV as the
result of the `->active' handler to be used where the feature requested
is not available on the hardware found.  However code handling core file
note generation in `fill_thread_core_info' interpretes any non-zero
result from the `->active' handler as the regset requested being active.
Consequently processing continues (and hopefully gracefully fails later
on) rather than being abandoned right away for the regset requested.

Fix the problem then by making the code proceed only if a positive
result is returned from the `->active' handler.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 4206d3aa1978 ("elf core dump: notes user_regset")
Patchwork: https://patchwork.linux-mips.org/patch/19332/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/binfmt_elf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1707,7 +1707,7 @@ static int fill_thread_core_info(struct
 		const struct user_regset *regset = &view->regsets[i];
 		do_thread_regset_writeback(t->task, regset);
 		if (regset->core_note_type && regset->get &&
-		    (!regset->active || regset->active(t->task, regset))) {
+		    (!regset->active || regset->active(t->task, regset) > 0)) {
 			int ret;
 			size_t size = regset->n * regset->size;
 			void *data = kmalloc(size, GFP_KERNEL);

[PATCH 4.4 48/70] audit: fix use-after-free in audit_add_watch

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ronny Chevalier <ronny.chevalier@hp.com>

[ Upstream commit baa2a4fdd525c8c4b0f704d20457195b29437839 ]

audit_add_watch stores locally krule->watch without taking a reference
on watch. Then, it calls audit_add_to_parent, and uses the watch stored
locally.

Unfortunately, it is possible that audit_add_to_parent updates
krule->watch.
When it happens, it also drops a reference of watch which
could free the watch.

How to reproduce (with KASAN enabled):

    auditctl -w /etc/passwd -F success=0 -k test_passwd
    auditctl -w /etc/passwd -F success=1 -k test_passwd2

The second call to auditctl triggers the use-after-free, because
audit_to_parent updates krule->watch to use a previous existing watch
and drops the reference to the newly created watch.

To fix the issue, we grab a reference of watch and we release it at the
end of the function.

Signed-off-by: Ronny Chevalier <ronny.chevalier@hp.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/audit_watch.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -419,6 +419,13 @@ int audit_add_watch(struct audit_krule *
 	struct path parent_path;
 	int h, ret = 0;
 
+	/*
+	 * When we will be calling audit_add_to_parent, krule->watch might have
+	 * been updated and watch might have been freed.
+	 * So we need to keep a reference of watch.
+	 */
+	audit_get_watch(watch);
+
 	mutex_unlock(&audit_filter_mutex);
 
 	/* Avoid calling path_lookup under audit_filter_mutex. */
@@ -427,8 +434,10 @@ int audit_add_watch(struct audit_krule *
 	/* caller expects mutex locked */
 	mutex_lock(&audit_filter_mutex);
 
-	if (ret)
+	if (ret) {
+		audit_put_watch(watch);
 		return ret;
+	}
 
 	/* either find an old parent or attach a new one */
 	parent = audit_find_parent(d_backing_inode(parent_path.dentry));
@@ -446,6 +455,7 @@ int audit_add_watch(struct audit_krule *
 	*list = &audit_inode_hash[h];
 error:
 	path_put(&parent_path);
+	audit_put_watch(watch);
 	return ret;
 }
 

[PATCH 4.4 49/70] mtdchar: fix overflows in adjustment of `count`

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jannh@google.com>

[ Upstream commit 6c6bc9ea84d0008024606bf5ba10519e20d851bf ]

The first checks in mtdchar_read() and mtdchar_write() attempt to limit
`count` such that `*ppos + count <= mtd->size`. However, they ignore the
possibility of `*ppos > mtd->size`, allowing the calculation of `count` to
wrap around. `mtdchar_lseek()` prevents seeking beyond mtd->size, but the
pread/pwrite syscalls bypass this.

I haven't found any codepath on which this actually causes dangerous
behavior, but it seems like a sensible change anyway.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/mtdchar.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -160,8 +160,12 @@ static ssize_t mtdchar_read(struct file
 
 	pr_debug("MTD_read\n");
 
-	if (*ppos + count > mtd->size)
-		count = mtd->size - *ppos;
+	if (*ppos + count > mtd->size) {
+		if (*ppos < mtd->size)
+			count = mtd->size - *ppos;
+		else
+			count = 0;
+	}
 
 	if (!count)
 		return 0;
@@ -246,7 +250,7 @@ static ssize_t mtdchar_write(struct file
 
 	pr_debug("MTD_write\n");
 
-	if (*ppos == mtd->size)
+	if (*ppos >= mtd->size)
 		return -ENOSPC;
 
 	if (*ppos + count > mtd->size)

[PATCH 4.4 50/70] MIPS: loongson64: cs5536: Fix PCI_OHCI_INT_REG reads

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@mips.com>

[ Upstream commit cd87668d601f622e0ebcfea4f78d116d5f572f4d ]

The PCI_OHCI_INT_REG case in pci_ohci_read_reg() contains the following
if statement:

  if ((lo & 0x00000f00) == CS5536_USB_INTR)

CS5536_USB_INTR expands to the constant 11, which gives us the following
condition which can never evaluate true:

  if ((lo & 0xf00) == 11)

At least when using GCC 8.1.0 this falls foul of the tautoligcal-compare
warning, and since the code is built with the -Werror flag the build
fails.

Fix this by shifting lo right by 8 bits in order to match the
corresponding PCI_OHCI_INT_REG case in pci_ohci_write_reg().

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19861/
Cc: Huacai Chen <chenhc@lemote.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/loongson64/common/cs5536/cs5536_ohci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c
@@ -138,7 +138,7 @@ u32 pci_ohci_read_reg(int reg)
 		break;
 	case PCI_OHCI_INT_REG:
 		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
-		if ((lo & 0x00000f00) == CS5536_USB_INTR)
+		if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR)
 			conf_data = 1;
 		break;
 	default:

[PATCH 4.4 51/70] ARM: hisi: handle of_iomap and fix missing of_node_put

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit d396cb185c0337aae5664b250cdd9a73f6eb1503 ]

Relying on an unchecked of_iomap() which can return NULL is problematic
here, an explicit check seems mandatory. Also the call to
of_find_compatible_node() returns a device node with refcount incremented
therefor an explicit of_node_put() is needed here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit 22bae4290457 ("ARM: hi3xxx: add hotplug support")
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-hisi/hotplug.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -148,13 +148,20 @@ static int hi3xxx_hotplug_init(void)
 	struct device_node *node;
 
 	node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
-	if (node) {
-		ctrl_base = of_iomap(node, 0);
-		id = HI3620_CTRL;
-		return 0;
+	if (!node) {
+		id = ERROR_CTRL;
+		return -ENOENT;
 	}
-	id = ERROR_CTRL;
-	return -ENOENT;
+
+	ctrl_base = of_iomap(node, 0);
+	of_node_put(node);
+	if (!ctrl_base) {
+		id = ERROR_CTRL;
+		return -ENOMEM;
+	}
+
+	id = HI3620_CTRL;
+	return 0;
 }
 
 void hi3xxx_set_cpu(int cpu, bool enable)

[PATCH 4.4 52/70] ARM: hisi: fix error handling and missing of_node_put

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit 9f30b5ae0585ca5234fe979294b8f897299dec99 ]

of_iomap() can return NULL which seems critical here and thus should be
explicitly flagged so that the cause of system halting can be understood.
As of_find_compatible_node() is returning a device node with refcount
incremented it must be explicitly decremented here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit 7fda91e73155 ("ARM: hisi: enable smp for HiP01")
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-hisi/hotplug.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -226,10 +226,10 @@ void hip01_set_cpu(int cpu, bool enable)
 
 	if (!ctrl_base) {
 		np = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl");
-		if (np)
-			ctrl_base = of_iomap(np, 0);
-		else
-			BUG();
+		BUG_ON(!np);
+		ctrl_base = of_iomap(np, 0);
+		of_node_put(np);
+		BUG_ON(!ctrl_base);
 	}
 
 	if (enable) {

[PATCH 4.4 53/70] ARM: hisi: check of_iomap and fix missing of_node_put

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit 81646a3d39ef14749301374a3a0b8311384cd412 ]

of_find_compatible_node() returns a device node with refcount incremented
and thus needs an explicit of_node_put(). Further relying on an unchecked
of_iomap() which can return NULL is problematic here, after all ctrl_base
is critical enough for hix5hd2_set_cpu() to call BUG() if not available
so a check seems mandated here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
0002 Fixes: commit 06cc5c1d4d73 ("ARM: hisi: enable hix5hd2 SoC")
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-hisi/hotplug.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -180,11 +180,15 @@ static bool hix5hd2_hotplug_init(void)
 	struct device_node *np;
 
 	np = of_find_compatible_node(NULL, NULL, "hisilicon,cpuctrl");
-	if (np) {
-		ctrl_base = of_iomap(np, 0);
-		return true;
-	}
-	return false;
+	if (!np)
+		return false;
+
+	ctrl_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!ctrl_base)
+		return false;
+
+	return true;
 }
 
 void hix5hd2_set_cpu(int cpu, bool enable)

[PATCH 4.4 54/70] drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit b59fb482b52269977ee5de205308e5b236a03917 ]

Depending on the kernel configuration, early ARM architecture setup code
may have attached the GPU to a DMA/IOMMU mapping that transparently uses
the IOMMU to back the DMA API. Tegra requires special handling for IOMMU
backed buffers (a special bit in the GPU's MMU page tables indicates the
memory path to take: via the SMMU or directly to the memory controller).
Transparently backing DMA memory with an IOMMU prevents Nouveau from
properly handling such memory accesses and causes memory access faults.

As a side-note: buffers other than those allocated in instance memory
don't need to be physically contiguous from the GPU's perspective since
the GPU can map them into contiguous buffers using its own MMU. Mapping
these buffers through the IOMMU is unnecessary and will even lead to
performance degradation because of the additional translation. One
exception to this are compressible buffers which need large pages. In
order to enable these large pages, multiple small pages will have to be
combined into one large (I/O virtually contiguous) mapping via the
IOMMU. However, that is a topic outside the scope of this fix and isn't
currently supported. An implementation will want to explicitly create
these large pages in the Nouveau driver, so detaching from a DMA/IOMMU
mapping would still be required.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c
@@ -23,6 +23,10 @@
 #ifdef CONFIG_NOUVEAU_PLATFORM_DRIVER
 #include "priv.h"
 
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+#include <asm/dma-iommu.h>
+#endif
+
 static int
 nvkm_device_tegra_power_up(struct nvkm_device_tegra *tdev)
 {
@@ -85,6 +89,15 @@ nvkm_device_tegra_probe_iommu(struct nvk
 	unsigned long pgsize_bitmap;
 	int ret;
 
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+	if (dev->archdata.mapping) {
+		struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+
+		arm_iommu_detach_device(dev);
+		arm_iommu_release_mapping(mapping);
+	}
+#endif
+
 	if (!tdev->func->iommu_bit)
 		return;
 

[PATCH 4.4 55/70] parport: sunbpp: fix error return code

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit faa1a47388b33623e4d504c23569188907b039a0 ]

Return an error code on failure.  Change leading spaces to tab on the
first if.

Problem found using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parport/parport_sunbpp.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -286,12 +286,16 @@ static int bpp_probe(struct platform_dev
 
 	ops = kmemdup(&parport_sunbpp_ops, sizeof(struct parport_operations),
 		      GFP_KERNEL);
-        if (!ops)
+	if (!ops) {
+		err = -ENOMEM;
 		goto out_unmap;
+	}
 
 	dprintk(("register_port\n"));
-	if (!(p = parport_register_port((unsigned long)base, irq, dma, ops)))
+	if (!(p = parport_register_port((unsigned long)base, irq, dma, ops))) {
+		err = -ENOMEM;
 		goto out_free_ops;
+	}
 
 	p->size = size;
 	p->dev = &op->dev;

[PATCH 4.4 56/70] coresight: Handle errors in finding input/output ports

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit fe470f5f7f684ed15bc49b6183a64237547910ff ]

If we fail to find the input / output port for a LINK component
while enabling a path, we should fail gracefully rather than
assuming port "0".

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwtracing/coresight/coresight.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -86,7 +86,7 @@ static int coresight_find_link_inport(st
 	dev_err(&csdev->dev, "couldn't find inport, parent: %s, child: %s\n",
 		dev_name(&parent->dev), dev_name(&csdev->dev));
 
-	return 0;
+	return -ENODEV;
 }
 
 static int coresight_find_link_outport(struct coresight_device *csdev)
@@ -107,7 +107,7 @@ static int coresight_find_link_outport(s
 	dev_err(&csdev->dev, "couldn't find outport, parent: %s, child: %s\n",
 		dev_name(&csdev->dev), dev_name(&child->dev));
 
-	return 0;
+	return -ENODEV;
 }
 
 static int coresight_enable_sink(struct coresight_device *csdev)
@@ -155,6 +155,9 @@ static int coresight_enable_link(struct
 	else
 		refport = 0;
 
+	if (refport < 0)
+		return refport;
+
 	if (atomic_inc_return(&csdev->refcnt[refport]) == 1) {
 		if (link_ops(csdev)->enable) {
 			ret = link_ops(csdev)->enable(csdev, inport, outport);

[PATCH 4.4 57/70] coresight: tpiu: Fix disabling timeouts

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit ccff2dfaceaca4517432f5c149594215fe9098cc ]

Probing the TPIU driver under UBSan triggers an out-of-bounds shift
warning in coresight_timeout():

...
[    5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16
[    5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int'
...

On closer inspection things are exponentially out of whack because we're
passing a bitmask where a bit number should be. Amusingly, it seems that
both calls will find their expected values by sheer luck and appear to
succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined
evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2
(TCPresent) which apparently is usually tied high.

Following the examples of other drivers, define separate FOO and FOO_BIT
macros for masks vs. indices, and put things right.

CC: Robert Walker <robert.walker@arm.com>
CC: Mike Leach <mike.leach@linaro.org>
CC: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 11595db8e17f ("coresight: Fix disabling of CoreSight TPIU")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwtracing/coresight/coresight-tpiu.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -46,8 +46,9 @@
 
 /** register definition **/
 /* FFSR - 0x300 */
-#define FFSR_FT_STOPPED		BIT(1)
+#define FFSR_FT_STOPPED_BIT	1
 /* FFCR - 0x304 */
+#define FFCR_FON_MAN_BIT	6
 #define FFCR_FON_MAN		BIT(6)
 #define FFCR_STOP_FI		BIT(12)
 
@@ -93,9 +94,9 @@ static void tpiu_disable_hw(struct tpiu_
 	/* Generate manual flush */
 	writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
 	/* Wait for flush to complete */
-	coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0);
+	coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN_BIT, 0);
 	/* Wait for formatter to stop */
-	coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1);
+	coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED_BIT, 1);
 
 	CS_LOCK(drvdata->base);
 }

[PATCH 4.4 58/70] gpiolib: Mark gpio_suffixes array with __maybe_unused

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit b23ec59926faf05b0c43680d05671c484e810ac4 ]

Since we put static variable to a header file it's copied to each module
that includes the header. But not all of them are actually used it.

Mark gpio_suffixes array with __maybe_unused to hide a compiler warning:

In file included from
drivers/gpio/gpiolib-legacy.c:6:0:
drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=]
 static const char * const gpio_suffixes[] = { "gpios", "gpio" };
                           ^~~~~~~~~~~~~
In file included from drivers/gpio/gpiolib-devprop.c:17:0:
drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=]
 static const char * const gpio_suffixes[] = { "gpios", "gpio" };
                           ^~~~~~~~~~~~~

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpiolib.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -30,7 +30,7 @@ struct acpi_gpio_info {
 };
 
 /* gpio suffixes used for ACPI and device tree lookup */
-static const char * const gpio_suffixes[] = { "gpios", "gpio" };
+static __maybe_unused const char * const gpio_suffixes[] = { "gpios", "gpio" };
 
 #ifdef CONFIG_ACPI
 void acpi_gpiochip_add(struct gpio_chip *chip);

[PATCH 4.4 59/70] drm/amdkfd: Fix error codes in kfd_get_process

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Lu <wei.lu2@amd.com>

[ Upstream commit e47cb828eb3fca3e8999a0b9aa053dda18552071 ]

Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process.
This fixes kernel oopses when a child process calls KFD ioctls with
a file descriptor inherited from the parent process.

Signed-off-by: Wei Lu <wei.lu2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_process.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
@@ -125,6 +125,8 @@ struct kfd_process *kfd_get_process(cons
 		return ERR_PTR(-EINVAL);
 
 	process = find_process(thread);
+	if (!process)
+		return ERR_PTR(-EINVAL);
 
 	return process;
 }

[PATCH 4.4 60/70] rtc: bq4802: add error handling for devm_ioremap

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhouyang Jia <jiazhouyang09@gmail.com>

[ Upstream commit 7874b919866ba91bac253fa219d3d4c82bb944df ]

When devm_ioremap fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling devm_ioremap.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-bq4802.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/rtc/rtc-bq4802.c
+++ b/drivers/rtc/rtc-bq4802.c
@@ -164,6 +164,10 @@ static int bq4802_probe(struct platform_
 	} else if (p->r->flags & IORESOURCE_MEM) {
 		p->regs = devm_ioremap(&pdev->dev, p->r->start,
 					resource_size(p->r));
+		if (!p->regs){
+			err = -ENOMEM;
+			goto out;
+		}
 		p->read = bq4802_read_mem;
 		p->write = bq4802_write_mem;
 	} else {

[PATCH 4.4 61/70] ALSA: pcm: Fix snd_interval_refine first/last with open min/max

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timo Wischer <twischer@de.adit-jv.com>

[ Upstream commit ff2d6acdf6f13d9f8fdcd890844c6d7535ac1f10 ]

Without this commit the following intervals [x y), (x y) were be
replaced to (y-1 y) by snd_interval_refine_last(). This was also done
if y-1 is part of the previous interval.
With this changes it will be replaced with [y-1 y) in case of y-1 is
part of the previous interval. A similar behavior will be used for
snd_interval_refine_first().

This commit adapts the changes for alsa-lib of commit
9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if
also excluded before")

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/pcm_lib.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -648,27 +648,33 @@ EXPORT_SYMBOL(snd_interval_refine);
 
 static int snd_interval_refine_first(struct snd_interval *i)
 {
+	const unsigned int last_max = i->max;
+
 	if (snd_BUG_ON(snd_interval_empty(i)))
 		return -EINVAL;
 	if (snd_interval_single(i))
 		return 0;
 	i->max = i->min;
-	i->openmax = i->openmin;
-	if (i->openmax)
+	if (i->openmin)
 		i->max++;
+	/* only exclude max value if also excluded before refine */
+	i->openmax = (i->openmax && i->max >= last_max);
 	return 1;
 }
 
 static int snd_interval_refine_last(struct snd_interval *i)
 {
+	const unsigned int last_min = i->min;
+
 	if (snd_BUG_ON(snd_interval_empty(i)))
 		return -EINVAL;
 	if (snd_interval_single(i))
 		return 0;
 	i->min = i->max;
-	i->openmin = i->openmax;
-	if (i->openmin)
+	if (i->openmax)
 		i->min--;
+	/* only exclude min value if also excluded before refine */
+	i->openmin = (i->openmin && i->min <= last_min);
 	return 1;
 }
 

[PATCH 4.4 62/70] selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

[ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ]

In the past we've warned when ADJ_OFFSET was in progress, usually
caused by ntpd or some other time adjusting daemon running in non
steady sate, which can cause the skew calculations to be
incorrect.

Thus, this patch checks to see if the clock was being adjusted
when we fail so that we don't cause false negatives.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
v2: Widened the checks to look for other clock adjustments that
    could happen, as suggested by Miroslav
v3: Fixed up commit message
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/timers/raw_skew.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/tools/testing/selftests/timers/raw_skew.c
+++ b/tools/testing/selftests/timers/raw_skew.c
@@ -146,6 +146,11 @@ int main(int argv, char **argc)
 	printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000)));
 
 	if (llabs(eppm - ppm) > 1000) {
+		if (tx1.offset || tx2.offset ||
+		    tx1.freq != tx2.freq || tx1.tick != tx2.tick) {
+			printf("	[SKIP]\n");
+			return ksft_exit_skip("The clock was adjusted externally. Shutdown NTPd or other time sync daemons\n");
+		}
 		printf("	[FAILED]\n");
 		return ksft_exit_fail();
 	}

[PATCH 4.4 63/70] drm/panel: type promotion bug in s6e8aa0_read_mtp_id()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit cd0e0ca69109d025b1a1b6609f70682db62138b0 ]

The ARRAY_SIZE() macro is type size_t.  If s6e8aa0_dcs_read() returns a
negative error code, then "ret < ARRAY_SIZE(id)" is false because the
negative error code is type promoted to a high positive value.

Fixes: 02051ca06371 ("drm/panel: add S6E8AA0 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountain
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
@@ -823,7 +823,7 @@ static void s6e8aa0_read_mtp_id(struct s
 	int ret, i;
 
 	ret = s6e8aa0_dcs_read(ctx, 0xd1, id, ARRAY_SIZE(id));
-	if (ret < ARRAY_SIZE(id) || id[0] == 0x00) {
+	if (ret < 0 || ret < ARRAY_SIZE(id) || id[0] == 0x00) {
 		dev_err(ctx->dev, "read id failed\n");
 		ctx->error = -EIO;
 		return;

[PATCH 4.4 64/70] IB/nes: Fix a compiler warning

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit 4c5743bc4fe3233cecc1c184a773c79c8ee45bbe ]

Avoid that the following compiler warning is reported when building with
W=1:

drivers/infiniband/hw/nes/nes_hw.c:646:51: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/nes/nes.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -156,7 +156,7 @@ do { \
 
 #define NES_EVENT_TIMEOUT   1200000
 #else
-#define nes_debug(level, fmt, args...)
+#define nes_debug(level, fmt, args...) do {} while (0)
 #define assert(expr)          do {} while (0)
 
 #define NES_EVENT_TIMEOUT   100000

[PATCH 4.4 65/70] pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ]

If you do this on an sdm845 board:
  grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups

...it looks like nonsense.  For every pin you see listed:
  input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ...

That's because pmic_gpio_config_get() isn't complying with the rules
that pinconf_generic_dump_one() expects.  Specifically for boolean
parameters (anything with a "struct pin_config_item" where has_arg is
false) the function expects that the function should return its value
not through the "config" parameter but should return "0" if the value
is set and "-EINVAL" if the value isn't set.

Let's fix this.

>From a quick sample of other pinctrl drivers, it appears to be
tradition to also return 1 through the config parameter for these
boolean parameters when they exist.  I'm not one to knock tradition,
so I'll follow tradition and return 1 in these cases.  While I'm at
it, I'll also continue searching for four leaf clovers, kocking on
wood three times, and trying not to break mirrors.

NOTE: This also fixes an apparent typo for reading
PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally
using "=" instead of "==" and thus was setting some internal
state when you tried to query PIN_CONFIG_BIAS_DISABLE.  Oops.

Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c |   32 +++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -291,31 +291,47 @@ static int pmic_gpio_config_get(struct p
 
 	switch (param) {
 	case PIN_CONFIG_DRIVE_PUSH_PULL:
-		arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_CMOS;
+		if (pad->buffer_type != PMIC_GPIO_OUT_BUF_CMOS)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS;
+		if (pad->buffer_type != PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_DRIVE_OPEN_SOURCE:
-		arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS;
+		if (pad->buffer_type != PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		arg = pad->pullup == PMIC_GPIO_PULL_DOWN;
+		if (pad->pullup != PMIC_GPIO_PULL_DOWN)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_DISABLE:
-		arg = pad->pullup = PMIC_GPIO_PULL_DISABLE;
+		if (pad->pullup != PMIC_GPIO_PULL_DISABLE)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		arg = pad->pullup == PMIC_GPIO_PULL_UP_30;
+		if (pad->pullup != PMIC_GPIO_PULL_UP_30)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		arg = !pad->is_enabled;
+		if (pad->is_enabled)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_POWER_SOURCE:
 		arg = pad->power_source;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		arg = pad->input_enabled;
+		if (!pad->input_enabled)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_OUTPUT:
 		arg = pad->out_value;

[PATCH 4.4 66/70] USB: serial: ti_usb_3410_5052: fix array underflow in completion handler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 5dfdd24eb3d39d815bc952ae98128e967c9bba49 upstream.

Similarly to a recently reported bug in io_ti, a malicious USB device
could set port_number to a negative value and we would underflow the
port array in the interrupt completion handler.

As these devices only have one or two ports, fix this by making sure we
only consider the seventh bit when determining the port number (and
ignore bits 0xb0 which are typically set to 0x30).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/usb/serial/ti_usb_3410_5052.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -227,7 +227,7 @@ struct ti_interrupt {
 } __attribute__((packed));
 
 /* Interrupt codes */
-#define TI_GET_PORT_FROM_CODE(c)	(((c) >> 4) - 3)
+#define TI_GET_PORT_FROM_CODE(c)	(((c) >> 6) & 0x01)
 #define TI_GET_FUNC_FROM_CODE(c)	((c) & 0x0f)
 #define TI_CODE_HARDWARE_ERROR		0xFF
 #define TI_CODE_DATA_ERROR		0x03

[PATCH 4.4 67/70] mei: bus: type promotion bug in mei_nfc_if_version()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit b40b3e9358fbafff6a4ba0f4b9658f6617146f9c upstream.

We accidentally removed the check for negative returns
without considering the issue of type promotion.
The "if_version_length" variable is type size_t so if __mei_cl_recv()
returns a negative then "bytes_recv" is type promoted
to a high positive value and treated as success.

Cc: <stable@vger.kernel.org>
Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/misc/mei/bus-fixup.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -151,7 +151,7 @@ static int mei_nfc_if_version(struct mei
 
 	ret = 0;
 	bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length);
-	if (bytes_recv < if_version_length) {
+	if (bytes_recv < 0 || bytes_recv < if_version_length) {
 		dev_err(bus->dev, "Could not read IF version\n");
 		ret = -EIO;
 		goto err;

[PATCH 4.4 68/70] drivers: net: cpsw: fix segfault in case of bad phy-handle

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rivshin <drivshin@allworx.com>

commit d733f7542ad47cf73e033c90cf55158587e1d060 upstream.

If an emac node has a phy-handle property that points to something
which is not a phy, then a segmentation fault will occur when the
interface is brought up. This is because while phy_connect() will
return ERR_PTR() on failure, of_phy_connect() will return NULL.
The common error check uses IS_ERR(), and so missed when
of_phy_connect() fails. The NULL pointer is then dereferenced.

Also, the common error message referenced slave->data->phy_id,
which would be empty in the case of phy-handle. Instead, use the
name of the device_node as a useful identifier. And in the phy_id
case add the error code for completeness.

Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[SZ Lin (林上智): Tweak the patch to use original print function of dev_info()]
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ti/cpsw.c |   37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1164,25 +1164,34 @@ static void cpsw_slave_open(struct cpsw_
 		cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
 				   1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
 
-	if (slave->data->phy_node)
+	if (slave->data->phy_node) {
 		slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node,
 				 &cpsw_adjust_link, 0, slave->data->phy_if);
-	else
+		if (!slave->phy) {
+			dev_err(priv->dev, "phy \"%s\" not found on slave %d\n",
+				slave->data->phy_node->full_name,
+				slave->slave_num);
+			return;
+		}
+	} else {
 		slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
 				 &cpsw_adjust_link, slave->data->phy_if);
-	if (IS_ERR(slave->phy)) {
-		dev_err(priv->dev, "phy %s not found on slave %d\n",
-			slave->data->phy_id, slave->slave_num);
-		slave->phy = NULL;
-	} else {
-		dev_info(priv->dev, "phy found : id is : 0x%x\n",
-			 slave->phy->phy_id);
-		phy_start(slave->phy);
-
-		/* Configure GMII_SEL register */
-		cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface,
-			     slave->slave_num);
+		if (IS_ERR(slave->phy)) {
+			dev_err(priv->dev,
+				"phy \"%s\" not found on slave %d, err %ld\n",
+				slave->data->phy_id, slave->slave_num,
+				PTR_ERR(slave->phy));
+			slave->phy = NULL;
+			return;
+		}
 	}
+
+	dev_info(priv->dev, "phy found : id is : 0x%x\n", slave->phy->phy_id);
+
+	phy_start(slave->phy);
+
+	/* Configure GMII_SEL register */
+	cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, slave->slave_num);
 }
 
 static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)

[PATCH 4.4 69/70] MIPS: VDSO: Match data page cache colouring when D$ aliases

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@mips.com>

commit 0f02cfbc3d9e413d450d8d0fd660077c23f67eff upstream.

When a system suffers from dcache aliasing a user program may observe
stale VDSO data from an aliased cache line. Notably this can break the
expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name
suggests, monotonic.

In order to ensure that users observe updates to the VDSO data page as
intended, align the user mappings of the VDSO data page such that their
cache colouring matches that of the virtual address range which the
kernel will use to update the data page - typically its unmapped address
within kseg0.

This ensures that we don't introduce aliasing cache lines for the VDSO
data page, and therefore that userland will observe updates without
requiring cache invalidation.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Rene Nielsen <rene.nielsen@microsemi.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Patchwork: https://patchwork.linux-mips.org/patch/20344/
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/mips/kernel/vdso.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -14,12 +14,14 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/irqchip/mips-gic.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/timekeeper_internal.h>
 
 #include <asm/abi.h>
+#include <asm/page.h>
 #include <asm/vdso.h>
 
 /* Kernel-provided data used by the VDSO. */
@@ -118,12 +120,30 @@ int arch_setup_additional_pages(struct l
 	vvar_size = gic_size + PAGE_SIZE;
 	size = vvar_size + image->size;
 
+	/*
+	 * Find a region that's large enough for us to perform the
+	 * colour-matching alignment below.
+	 */
+	if (cpu_has_dc_aliases)
+		size += shm_align_mask + 1;
+
 	base = get_unmapped_area(NULL, 0, size, 0, 0);
 	if (IS_ERR_VALUE(base)) {
 		ret = base;
 		goto out;
 	}
 
+	/*
+	 * If we suffer from dcache aliasing, ensure that the VDSO data page
+	 * mapping is coloured the same as the kernel's mapping of that memory.
+	 * This ensures that when the kernel updates the VDSO data userland
+	 * will observe it without requiring cache invalidations.
+	 */
+	if (cpu_has_dc_aliases) {
+		base = __ALIGN_MASK(base, shm_align_mask);
+		base += ((unsigned long)&vdso_data - gic_size) & shm_align_mask;
+	}
+
 	data_addr = base + gic_size;
 	vdso_addr = data_addr + PAGE_SIZE;
 

[PATCH 4.4 70/70] MIPS: VDSO: Drop gic_get_usm_range() usage

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>

commit 00578cd864d45ae4b8fa3f684f8d6f783dd8d15d upstream.

We don't really need gic_get_usm_range() to abstract discovery of the
address of the GIC user-visible section now that we have access to its
base address globally.

Switch to calculating it ourselves, which will allow us to stop
requiring the irqchip driver to care about a counter exposed to userland
for use via the VDSO.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17040/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/kernel/vdso.c |   15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -13,7 +13,6 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/irqchip/mips-gic.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
@@ -21,6 +20,7 @@
 #include <linux/timekeeper_internal.h>
 
 #include <asm/abi.h>
+#include <asm/mips-cps.h>
 #include <asm/page.h>
 #include <asm/vdso.h>
 
@@ -101,9 +101,8 @@ int arch_setup_additional_pages(struct l
 {
 	struct mips_vdso_image *image = current->thread.abi->vdso;
 	struct mm_struct *mm = current->mm;
-	unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr;
+	unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr, gic_pfn;
 	struct vm_area_struct *vma;
-	struct resource gic_res;
 	int ret;
 
 	down_write(&mm->mmap_sem);
@@ -116,7 +115,7 @@ int arch_setup_additional_pages(struct l
 	 * only map a page even though the total area is 64K, as we only need
 	 * the counter registers at the start.
 	 */
-	gic_size = gic_present ? PAGE_SIZE : 0;
+	gic_size = mips_gic_present() ? PAGE_SIZE : 0;
 	vvar_size = gic_size + PAGE_SIZE;
 	size = vvar_size + image->size;
 
@@ -157,13 +156,9 @@ int arch_setup_additional_pages(struct l
 
 	/* Map GIC user page. */
 	if (gic_size) {
-		ret = gic_get_usm_range(&gic_res);
-		if (ret)
-			goto out;
+		gic_pfn = virt_to_phys(mips_gic_base + MIPS_GIC_USER_OFS) >> PAGE_SHIFT;
 
-		ret = io_remap_pfn_range(vma, base,
-					 gic_res.start >> PAGE_SHIFT,
-					 gic_size,
+		ret = io_remap_pfn_range(vma, base, gic_pfn, gic_size,
 					 pgprot_noncached(PAGE_READONLY));
 		if (ret)
 			goto out;

Re: [PATCH 4.4 00/70] 4.4.158-stable review

[Nathan Chancellor]

On Mon, Sep 24, 2018 at 01:51:59PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.158 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.158-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled with -Werror, and installed onto my Pixel 2 XL.

No initial issues noticed in dmesg or general usage.

Thanks!
Nathan

Re: [PATCH 4.4 00/70] 4.4.158-stable review

[Dan Rue]

On Mon, Sep 24, 2018 at 01:51:59PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.158 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
> Anything received after that time might be too late.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.158-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: caf273efe9e5a0544c24dfcbc3e887af5aa56657
git describe: v4.4.157-71-gcaf273efe9e5
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.157-71-gcaf273efe9e5


No regressions (compared to build v4.4.157)


Ran 16823 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Summary
------------------------------------------------------------------------

kernel: 4.4.158-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.158-rc1-hikey-20180924-290
git commit: 14bb2972eaf3d110a491622f3a3330c440afcb82
git describe: 4.4.158-rc1-hikey-20180924-290
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.158-rc1-hikey-20180924-290


No regressions (compared to build 4.4.158-rc1-hikey-20180923-289)


Ran 2725 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64
- qemu_arm64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.4 00/70] 4.4.158-stable review

[Shuah Khan]

On 09/24/2018 05:51 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.158 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.158-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions since the last release
I tested.

Missed a couple of releases while traveling. :)

thanks,
-- Shuah

Re: [PATCH 4.4 00/70] 4.4.158-stable review

[Greg Kroah-Hartman]

On Mon, Sep 24, 2018 at 01:51:59PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.158 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.158-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.

-rc2 is out to resolve some reported problems:
 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.158-rc2.gz

Re: [PATCH 4.4 00/70] 4.4.158-stable review

[Greg Kroah-Hartman]

On Mon, Sep 24, 2018 at 04:15:45PM -0600, Shuah Khan wrote:
> On 09/24/2018 05:51 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.158 release.
> > There are 70 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.158-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions since the last release
> I tested.
> 
> Missed a couple of releases while traveling. :)

Welcome back!

And thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.4 00/70] 4.4.158-stable review

[Guenter Roeck]

On Mon, Sep 24, 2018 at 01:51:59PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.158 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Sep 26 11:30:25 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 151 pass: 151 fail: 0
Qemu test results:
	total: 285 pass: 284 fail: 1
Failed tests: 
	powerpc:g3beige:ppc_book3s_defconfig:nosmp:ide:rootfs

The failed test is the result of a crash in devicetree unittest code.
It affects all branches. Nothing to worry about; fix is being worked on.

Details are available at https://kerneltests.org/builders/.

Guenter