* [PATCH 4.18 01/88] gso_segment: Reset skb->mac_len after modifying network header
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 02/88] ipv6: fix possible use-after-free in ip6_xmit() Greg Kroah-Hartman
` (90 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dave Taht, Eric Dumazet,
Toke Høiland-Jørgensen, David S. Miller
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 1953 bytes --]
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Toke Høiland-Jørgensen" <toke@toke.dk>
[ Upstream commit c56cae23c6b167acc68043c683c4573b80cbcc2c ]
When splitting a GSO segment that consists of encapsulated packets, the
skb->mac_len of the segments can end up being set wrong, causing packet
drops in particular when using act_mirred and ifb interfaces in
combination with a qdisc that splits GSO packets.
This happens because at the time skb_segment() is called, network_header
will point to the inner header, throwing off the calculation in
skb_reset_mac_len(). The network_header is subsequently adjust by the
outer IP gso_segment handlers, but they don't set the mac_len.
Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6
gso_segment handlers, after they modify the network_header.
Many thanks to Eric Dumazet for his help in identifying the cause of
the bug.
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/af_inet.c | 1 +
net/ipv6/ip6_offload.c | 1 +
2 files changed, 2 insertions(+)
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1377,6 +1377,7 @@ struct sk_buff *inet_gso_segment(struct
if (encap)
skb_reset_inner_headers(skb);
skb->network_header = (u8 *)iph - skb->head;
+ skb_reset_mac_len(skb);
} while ((skb = skb->next));
out:
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -115,6 +115,7 @@ static struct sk_buff *ipv6_gso_segment(
payload_len = skb->len - nhoff - sizeof(*ipv6h);
ipv6h->payload_len = htons(payload_len);
skb->network_header = (u8 *)ipv6h - skb->head;
+ skb_reset_mac_len(skb);
if (udpfrag) {
int err = ip6_find_1stfragopt(skb, &prevhdr);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 02/88] ipv6: fix possible use-after-free in ip6_xmit()
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 01/88] gso_segment: Reset skb->mac_len after modifying network header Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 03/88] net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT Greg Kroah-Hartman
` (89 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, syzbot, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit bbd6528d28c1b8e80832b3b018ec402b6f5c3215 ]
In the unlikely case ip6_xmit() has to call skb_realloc_headroom(),
we need to call skb_set_owner_w() before consuming original skb,
otherwise we risk a use-after-free.
Bring IPv6 in line with what we do in IPv4 to fix this.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/ip6_output.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -219,12 +219,10 @@ int ip6_xmit(const struct sock *sk, stru
kfree_skb(skb);
return -ENOBUFS;
}
+ if (skb->sk)
+ skb_set_owner_w(skb2, skb->sk);
consume_skb(skb);
skb = skb2;
- /* skb_set_owner_w() changes sk->sk_wmem_alloc atomically,
- * it is safe to call in our context (socket lock not held)
- */
- skb_set_owner_w(skb, (struct sock *)sk);
}
if (opt->opt_flen)
ipv6_push_frag_opts(skb, opt, &proto);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 03/88] net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 01/88] gso_segment: Reset skb->mac_len after modifying network header Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 02/88] ipv6: fix possible use-after-free in ip6_xmit() Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 04/88] net: hp100: fix always-true check for link up state Greg Kroah-Hartman
` (88 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jann Horn, Willy Tarreau, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Willy Tarreau <w@1wt.eu>
[ Upstream commit 9824dfae5741275473a23a7ed5756c7b6efacc9d ]
Fields ->dev and ->next of struct ipddp_route may be copied to
userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible
to CAP_NET_ADMIN though. Let's manually copy the relevant fields
instead of using memcpy().
BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/appletalk/ipddp.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -283,8 +283,12 @@ static int ipddp_ioctl(struct net_device
case SIOCFINDIPDDPRT:
spin_lock_bh(&ipddp_route_lock);
rp = __ipddp_find_route(&rcp);
- if (rp)
- memcpy(&rcp2, rp, sizeof(rcp2));
+ if (rp) {
+ memset(&rcp2, 0, sizeof(rcp2));
+ rcp2.ip = rp->ip;
+ rcp2.at = rp->at;
+ rcp2.flags = rp->flags;
+ }
spin_unlock_bh(&ipddp_route_lock);
if (rp) {
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 04/88] net: hp100: fix always-true check for link up state
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 03/88] net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 05/88] pppoe: fix reception of frames with no mac header Greg Kroah-Hartman
` (87 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Colin Ian King, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit a7f38002fb69b44f8fc622ecb838665d0b8666af ]
The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value
that is always non-zero and hence the wait for the link to drop always
terminates prematurely. Fix this by using a logical not operator instead
of a bitwise complement. This issue has been in the driver since
pre-2.6.12-rc2.
Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/hp/hp100.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/hp/hp100.c
+++ b/drivers/net/ethernet/hp/hp100.c
@@ -2634,7 +2634,7 @@ static int hp100_login_to_vg_hub(struct
/* Wait for link to drop */
time = jiffies + (HZ / 10);
do {
- if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
+ if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
break;
if (!in_interrupt())
schedule_timeout_interruptible(1);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 05/88] pppoe: fix reception of frames with no mac header
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 04/88] net: hp100: fix always-true check for link up state Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 06/88] qmi_wwan: set DTR for modems in forced USB2 mode Greg Kroah-Hartman
` (86 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+f5f6080811c849739212,
Guillaume Nault, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guillaume Nault <g.nault@alphalink.fr>
[ Upstream commit 8540827ebac6b654ab2f69c8fbce9e4fbd6304a0 ]
pppoe_rcv() needs to look back at the Ethernet header in order to
lookup the PPPoE session. Therefore we need to ensure that the mac
header is big enough to contain an Ethernet header. Otherwise
eth_hdr(skb)->h_source might access invalid data.
==================================================================
BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline]
BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline]
BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
__get_item drivers/net/ppp/pppoe.c:172 [inline]
get_item drivers/net/ppp/pppoe.c:236 [inline]
pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
__netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
netif_receive_skb+0x230/0x240 net/core/dev.c:4725
tun_rx_batched drivers/net/tun.c:1555 [inline]
tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
call_write_iter include/linux/fs.h:1782 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x7fb/0x9f0 fs/read_write.c:482
vfs_write+0x463/0x8d0 fs/read_write.c:544
SYSC_write+0x172/0x360 fs/read_write.c:589
SyS_write+0x55/0x80 fs/read_write.c:581
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4447c9
RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9
RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004
RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda
R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
tun_alloc_skb drivers/net/tun.c:1532 [inline]
tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
call_write_iter include/linux/fs.h:1782 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x7fb/0x9f0 fs/read_write.c:482
vfs_write+0x463/0x8d0 fs/read_write.c:544
SYSC_write+0x172/0x360 fs/read_write.c:589
SyS_write+0x55/0x80 fs/read_write.c:581
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
==================================================================
Fixes: 224cf5ad14c0 ("ppp: Move the PPP drivers")
Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ppp/pppoe.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -429,6 +429,9 @@ static int pppoe_rcv(struct sk_buff *skb
if (!skb)
goto out;
+ if (skb_mac_header_len(skb) < ETH_HLEN)
+ goto drop;
+
if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
goto drop;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 06/88] qmi_wwan: set DTR for modems in forced USB2 mode
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 05/88] pppoe: fix reception of frames with no mac header Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 07/88] udp4: fix IP_CMSG_CHECKSUM for connected sockets Greg Kroah-Hartman
` (85 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fred Veldini, Deshu Wen,
Bjørn Mork, David S. Miller
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2696 bytes --]
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Bjørn Mork" <bjorn@mork.no>
[ Upstream commit 922005c7f50e7f4b2a6dbc182e9c575b4f92396b ]
Recent firmware revisions have added the ability to force
these modems to USB2 mode, hiding their SuperSpeed
capabilities from the host. The driver has been using the
SuperSpeed capability, as shown by the bcdUSB field of the
device descriptor, to detect the need to enable the DTR
quirk. This method fails when the modems are forced to
USB2 mode by the modem firmware.
Fix by unconditionally enabling the DTR quirk for the
affected device IDs.
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/qmi_wwan.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1206,13 +1206,13 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */
{QMI_FIXED_INTF(0x1199, 0x9063, 8)}, /* Sierra Wireless EM7305 */
{QMI_FIXED_INTF(0x1199, 0x9063, 10)}, /* Sierra Wireless EM7305 */
- {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */
- {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */
- {QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */
- {QMI_FIXED_INTF(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 10)},/* Sierra Wireless MC74xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 10)},/* Sierra Wireless EM74xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 07/88] udp4: fix IP_CMSG_CHECKSUM for connected sockets
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 06/88] qmi_wwan: set DTR for modems in forced USB2 mode Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 08/88] tls: dont copy the key out of tls12_crypto_info_aes_gcm_128 Greg Kroah-Hartman
` (84 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paolo Abeni, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <pabeni@redhat.com>
[ Upstream commit 2b5a921740a55c00223a797d075b9c77c42cb171 ]
commit 2abb7cdc0dc8 ("udp: Add support for doing checksum
unnecessary conversion") left out the early demux path for
connected sockets. As a result IP_CMSG_CHECKSUM gives wrong
values for such socket when GRO is not enabled/available.
This change addresses the issue by moving the csum conversion to a
common helper and using such helper in both the default and the
early demux rx path.
Fixes: 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp.c | 49 ++++++++++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 23 deletions(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2128,6 +2128,28 @@ static inline int udp4_csum_init(struct
inet_compute_pseudo);
}
+/* wrapper for udp_queue_rcv_skb tacking care of csum conversion and
+ * return code conversion for ip layer consumption
+ */
+static int udp_unicast_rcv_skb(struct sock *sk, struct sk_buff *skb,
+ struct udphdr *uh)
+{
+ int ret;
+
+ if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
+ skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
+ inet_compute_pseudo);
+
+ ret = udp_queue_rcv_skb(sk, skb);
+
+ /* a return value > 0 means to resubmit the input, but
+ * it wants the return to be -protocol, or 0
+ */
+ if (ret > 0)
+ return -ret;
+ return 0;
+}
+
/*
* All we need to do is get the socket, and then do a checksum.
*/
@@ -2174,14 +2196,9 @@ int __udp4_lib_rcv(struct sk_buff *skb,
if (unlikely(sk->sk_rx_dst != dst))
udp_sk_rx_dst_set(sk, dst);
- ret = udp_queue_rcv_skb(sk, skb);
+ ret = udp_unicast_rcv_skb(sk, skb, uh);
sock_put(sk);
- /* a return value > 0 means to resubmit the input, but
- * it wants the return to be -protocol, or 0
- */
- if (ret > 0)
- return -ret;
- return 0;
+ return ret;
}
if (rt->rt_flags & (RTCF_BROADCAST|RTCF_MULTICAST))
@@ -2189,22 +2206,8 @@ int __udp4_lib_rcv(struct sk_buff *skb,
saddr, daddr, udptable, proto);
sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
- if (sk) {
- int ret;
-
- if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
- skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
- inet_compute_pseudo);
-
- ret = udp_queue_rcv_skb(sk, skb);
-
- /* a return value > 0 means to resubmit the input, but
- * it wants the return to be -protocol, or 0
- */
- if (ret > 0)
- return -ret;
- return 0;
- }
+ if (sk)
+ return udp_unicast_rcv_skb(sk, skb, uh);
if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
goto drop;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 08/88] tls: dont copy the key out of tls12_crypto_info_aes_gcm_128
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 07/88] udp4: fix IP_CMSG_CHECKSUM for connected sockets Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 09/88] tls: zero the crypto information from tls_context before freeing Greg Kroah-Hartman
` (83 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sabrina Dubroca, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <sd@queasysnail.net>
[ Upstream commit 7cba09c6d5bc73ebbd25a353742d9ddb7a713b95 ]
There's no need to copy the key to an on-stack buffer before calling
crypto_aead_setkey().
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tls/tls_sw.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -1064,7 +1064,6 @@ void tls_sw_free_resources_rx(struct soc
int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx)
{
- char keyval[TLS_CIPHER_AES_GCM_128_KEY_SIZE];
struct tls_crypto_info *crypto_info;
struct tls12_crypto_info_aes_gcm_128 *gcm_128_info;
struct tls_sw_context_tx *sw_ctx_tx = NULL;
@@ -1184,9 +1183,7 @@ int tls_set_sw_offload(struct sock *sk,
ctx->push_pending_record = tls_sw_push_pending_record;
- memcpy(keyval, gcm_128_info->key, TLS_CIPHER_AES_GCM_128_KEY_SIZE);
-
- rc = crypto_aead_setkey(*aead, keyval,
+ rc = crypto_aead_setkey(*aead, gcm_128_info->key,
TLS_CIPHER_AES_GCM_128_KEY_SIZE);
if (rc)
goto free_aead;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 09/88] tls: zero the crypto information from tls_context before freeing
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 08/88] tls: dont copy the key out of tls12_crypto_info_aes_gcm_128 Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 10/88] tls: clear key material from kernel memory when do_tls_setsockopt_conf fails Greg Kroah-Hartman
` (82 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sabrina Dubroca, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <sd@queasysnail.net>
[ Upstream commit 86029d10af18381814881d6cce2dd6872163b59f ]
This contains key material in crypto_send_aes_gcm_128 and
crypto_recv_aes_gcm_128.
Introduce union tls_crypto_context, and replace the two identical
unions directly embedded in struct tls_context with it. We can then
use this union to clean up the memory in the new tls_ctx_free()
function.
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/tls.h | 19 +++++++++----------
net/tls/tls_device.c | 4 ++--
net/tls/tls_device_fallback.c | 2 +-
net/tls/tls_main.c | 20 +++++++++++++++-----
net/tls/tls_sw.c | 8 ++++----
5 files changed, 31 insertions(+), 22 deletions(-)
--- a/include/net/tls.h
+++ b/include/net/tls.h
@@ -165,15 +165,14 @@ struct cipher_context {
char *rec_seq;
};
+union tls_crypto_context {
+ struct tls_crypto_info info;
+ struct tls12_crypto_info_aes_gcm_128 aes_gcm_128;
+};
+
struct tls_context {
- union {
- struct tls_crypto_info crypto_send;
- struct tls12_crypto_info_aes_gcm_128 crypto_send_aes_gcm_128;
- };
- union {
- struct tls_crypto_info crypto_recv;
- struct tls12_crypto_info_aes_gcm_128 crypto_recv_aes_gcm_128;
- };
+ union tls_crypto_context crypto_send;
+ union tls_crypto_context crypto_recv;
struct list_head list;
struct net_device *netdev;
@@ -337,8 +336,8 @@ static inline void tls_fill_prepend(stru
* size KTLS_DTLS_HEADER_SIZE + KTLS_DTLS_NONCE_EXPLICIT_SIZE
*/
buf[0] = record_type;
- buf[1] = TLS_VERSION_MINOR(ctx->crypto_send.version);
- buf[2] = TLS_VERSION_MAJOR(ctx->crypto_send.version);
+ buf[1] = TLS_VERSION_MINOR(ctx->crypto_send.info.version);
+ buf[2] = TLS_VERSION_MAJOR(ctx->crypto_send.info.version);
/* we can use IV for nonce explicit according to spec */
buf[3] = pkt_len >> 8;
buf[4] = pkt_len & 0xFF;
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -552,7 +552,7 @@ int tls_set_device_offload(struct sock *
goto free_marker_record;
}
- crypto_info = &ctx->crypto_send;
+ crypto_info = &ctx->crypto_send.info;
switch (crypto_info->cipher_type) {
case TLS_CIPHER_AES_GCM_128:
nonce_size = TLS_CIPHER_AES_GCM_128_IV_SIZE;
@@ -650,7 +650,7 @@ int tls_set_device_offload(struct sock *
ctx->priv_ctx_tx = offload_ctx;
rc = netdev->tlsdev_ops->tls_dev_add(netdev, sk, TLS_OFFLOAD_CTX_DIR_TX,
- &ctx->crypto_send,
+ &ctx->crypto_send.info,
tcp_sk(sk)->write_seq);
if (rc)
goto release_netdev;
--- a/net/tls/tls_device_fallback.c
+++ b/net/tls/tls_device_fallback.c
@@ -320,7 +320,7 @@ static struct sk_buff *tls_enc_skb(struc
goto free_req;
iv = buf;
- memcpy(iv, tls_ctx->crypto_send_aes_gcm_128.salt,
+ memcpy(iv, tls_ctx->crypto_send.aes_gcm_128.salt,
TLS_CIPHER_AES_GCM_128_SALT_SIZE);
aad = buf + TLS_CIPHER_AES_GCM_128_SALT_SIZE +
TLS_CIPHER_AES_GCM_128_IV_SIZE;
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -245,6 +245,16 @@ static void tls_write_space(struct sock
ctx->sk_write_space(sk);
}
+static void tls_ctx_free(struct tls_context *ctx)
+{
+ if (!ctx)
+ return;
+
+ memzero_explicit(&ctx->crypto_send, sizeof(ctx->crypto_send));
+ memzero_explicit(&ctx->crypto_recv, sizeof(ctx->crypto_recv));
+ kfree(ctx);
+}
+
static void tls_sk_proto_close(struct sock *sk, long timeout)
{
struct tls_context *ctx = tls_get_ctx(sk);
@@ -295,7 +305,7 @@ static void tls_sk_proto_close(struct so
#else
{
#endif
- kfree(ctx);
+ tls_ctx_free(ctx);
ctx = NULL;
}
@@ -306,7 +316,7 @@ skip_tx_cleanup:
* for sk->sk_prot->unhash [tls_hw_unhash]
*/
if (free_ctx)
- kfree(ctx);
+ tls_ctx_free(ctx);
}
static int do_tls_getsockopt_tx(struct sock *sk, char __user *optval,
@@ -331,7 +341,7 @@ static int do_tls_getsockopt_tx(struct s
}
/* get user crypto info */
- crypto_info = &ctx->crypto_send;
+ crypto_info = &ctx->crypto_send.info;
if (!TLS_CRYPTO_INFO_READY(crypto_info)) {
rc = -EBUSY;
@@ -418,9 +428,9 @@ static int do_tls_setsockopt_conf(struct
}
if (tx)
- crypto_info = &ctx->crypto_send;
+ crypto_info = &ctx->crypto_send.info;
else
- crypto_info = &ctx->crypto_recv;
+ crypto_info = &ctx->crypto_recv.info;
/* Currently we don't support set crypto info more than one time */
if (TLS_CRYPTO_INFO_READY(crypto_info)) {
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -989,8 +989,8 @@ static int tls_read_size(struct strparse
goto read_failure;
}
- if (header[1] != TLS_VERSION_MINOR(tls_ctx->crypto_recv.version) ||
- header[2] != TLS_VERSION_MAJOR(tls_ctx->crypto_recv.version)) {
+ if (header[1] != TLS_VERSION_MINOR(tls_ctx->crypto_recv.info.version) ||
+ header[2] != TLS_VERSION_MAJOR(tls_ctx->crypto_recv.info.version)) {
ret = -EINVAL;
goto read_failure;
}
@@ -1099,11 +1099,11 @@ int tls_set_sw_offload(struct sock *sk,
}
if (tx) {
- crypto_info = &ctx->crypto_send;
+ crypto_info = &ctx->crypto_send.info;
cctx = &ctx->tx;
aead = &sw_ctx_tx->aead_send;
} else {
- crypto_info = &ctx->crypto_recv;
+ crypto_info = &ctx->crypto_recv.info;
cctx = &ctx->rx;
aead = &sw_ctx_rx->aead_recv;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 10/88] tls: clear key material from kernel memory when do_tls_setsockopt_conf fails
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 09/88] tls: zero the crypto information from tls_context before freeing Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 11/88] neighbour: confirm neigh entries when ARP packet is received Greg Kroah-Hartman
` (81 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sabrina Dubroca, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <sd@queasysnail.net>
[ Upstream commit c844eb46b7d43c2cf760169df5ae1d5b033af338 ]
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tls/tls_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -502,7 +502,7 @@ static int do_tls_setsockopt_conf(struct
goto out;
err_crypto_info:
- memset(crypto_info, 0, sizeof(*crypto_info));
+ memzero_explicit(crypto_info, sizeof(union tls_crypto_context));
out:
return rc;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 11/88] neighbour: confirm neigh entries when ARP packet is received
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 10/88] tls: clear key material from kernel memory when do_tls_setsockopt_conf fails Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 12/88] udp6: add missing checks on edumux packet processing Greg Kroah-Hartman
` (80 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vasily Khoruzhick, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Khoruzhick <vasilykh@arista.com>
[ Upstream commit f0e0d04413fcce9bc76388839099aee93cd0d33b ]
Update 'confirmed' timestamp when ARP packet is received. It shouldn't
affect locktime logic and anyway entry can be confirmed by any higher-layer
protocol. Thus it makes sense to confirm it when ARP packet is received.
Fixes: 77d7123342dc ("neighbour: update neigh timestamps iff update is effective")
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/neighbour.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1179,6 +1179,12 @@ int neigh_update(struct neighbour *neigh
lladdr = neigh->ha;
}
+ /* Update confirmed timestamp for neighbour entry after we
+ * received ARP packet even if it doesn't change IP to MAC binding.
+ */
+ if (new & NUD_CONNECTED)
+ neigh->confirmed = jiffies;
+
/* If entry was valid and address is not changed,
do not change entry state, if new one is STALE.
*/
@@ -1200,15 +1206,12 @@ int neigh_update(struct neighbour *neigh
}
}
- /* Update timestamps only once we know we will make a change to the
+ /* Update timestamp only once we know we will make a change to the
* neighbour entry. Otherwise we risk to move the locktime window with
* noop updates and ignore relevant ARP updates.
*/
- if (new != old || lladdr != neigh->ha) {
- if (new & NUD_CONNECTED)
- neigh->confirmed = jiffies;
+ if (new != old || lladdr != neigh->ha)
neigh->updated = jiffies;
- }
if (new != old) {
neigh_del_timer(neigh);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 12/88] udp6: add missing checks on edumux packet processing
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 11/88] neighbour: confirm neigh entries when ARP packet is received Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 13/88] net/sched: act_sample: fix NULL dereference in the data path Greg Kroah-Hartman
` (79 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jianlin Shi, Xin Long, Paolo Abeni,
David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <pabeni@redhat.com>
[ Upstream commit eb63f2964dbe36f26deac77d3016791675821ded ]
Currently the UDPv6 early demux rx code path lacks some mandatory
checks, already implemented into the normal RX code path - namely
the checksum conversion and no_check6_rx check.
Similar to the previous commit, we move the common processing to
an UDPv6 specific helper and call it from both edemux code path
and normal code path. In respect to the UDPv4, we need to add an
explicit check for non zero csum according to no_check6_rx value.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: c9f2c1ae123a ("udp6: fix socket leak on early demux")
Fixes: 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/udp.c | 65 ++++++++++++++++++++++++++++++++-------------------------
1 file changed, 37 insertions(+), 28 deletions(-)
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -748,6 +748,28 @@ static void udp6_sk_rx_dst_set(struct so
}
}
+/* wrapper for udp_queue_rcv_skb tacking care of csum conversion and
+ * return code conversion for ip layer consumption
+ */
+static int udp6_unicast_rcv_skb(struct sock *sk, struct sk_buff *skb,
+ struct udphdr *uh)
+{
+ int ret;
+
+ if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
+ skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
+ ip6_compute_pseudo);
+
+ ret = udpv6_queue_rcv_skb(sk, skb);
+
+ /* a return value > 0 means to resubmit the input, but
+ * it wants the return to be -protocol, or 0
+ */
+ if (ret > 0)
+ return -ret;
+ return 0;
+}
+
int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
int proto)
{
@@ -799,13 +821,14 @@ int __udp6_lib_rcv(struct sk_buff *skb,
if (unlikely(sk->sk_rx_dst != dst))
udp6_sk_rx_dst_set(sk, dst);
- ret = udpv6_queue_rcv_skb(sk, skb);
- sock_put(sk);
+ if (!uh->check && !udp_sk(sk)->no_check6_rx) {
+ sock_put(sk);
+ goto report_csum_error;
+ }
- /* a return value > 0 means to resubmit the input */
- if (ret > 0)
- return ret;
- return 0;
+ ret = udp6_unicast_rcv_skb(sk, skb, uh);
+ sock_put(sk);
+ return ret;
}
/*
@@ -818,30 +841,13 @@ int __udp6_lib_rcv(struct sk_buff *skb,
/* Unicast */
sk = __udp6_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
if (sk) {
- int ret;
-
- if (!uh->check && !udp_sk(sk)->no_check6_rx) {
- udp6_csum_zero_error(skb);
- goto csum_error;
- }
-
- if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk))
- skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check,
- ip6_compute_pseudo);
-
- ret = udpv6_queue_rcv_skb(sk, skb);
-
- /* a return value > 0 means to resubmit the input */
- if (ret > 0)
- return ret;
-
- return 0;
+ if (!uh->check && !udp_sk(sk)->no_check6_rx)
+ goto report_csum_error;
+ return udp6_unicast_rcv_skb(sk, skb, uh);
}
- if (!uh->check) {
- udp6_csum_zero_error(skb);
- goto csum_error;
- }
+ if (!uh->check)
+ goto report_csum_error;
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard;
@@ -862,6 +868,9 @@ short_packet:
ulen, skb->len,
daddr, ntohs(uh->dest));
goto discard;
+
+report_csum_error:
+ udp6_csum_zero_error(skb);
csum_error:
__UDP6_INC_STATS(net, UDP_MIB_CSUMERRORS, proto == IPPROTO_UDPLITE);
discard:
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 13/88] net/sched: act_sample: fix NULL dereference in the data path
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 12/88] udp6: add missing checks on edumux packet processing Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 14/88] hv_netvsc: fix schedule in RCU context Greg Kroah-Hartman
` (78 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matteo Croce, Davide Caratti,
Jiri Pirko, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <dcaratti@redhat.com>
[ Upstream commit 34043d250f51368f214aed7f54c2dc29c819a8c7 ]
Matteo reported the following splat, testing the datapath of TC 'sample':
BUG: KASAN: null-ptr-deref in tcf_sample_act+0xc4/0x310
Read of size 8 at addr 0000000000000000 by task nc/433
CPU: 0 PID: 433 Comm: nc Not tainted 4.19.0-rc3-kvm #17
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
Call Trace:
kasan_report.cold.6+0x6c/0x2fa
tcf_sample_act+0xc4/0x310
? dev_hard_start_xmit+0x117/0x180
tcf_action_exec+0xa3/0x160
tcf_classify+0xdd/0x1d0
htb_enqueue+0x18e/0x6b0
? deref_stack_reg+0x7a/0xb0
? htb_delete+0x4b0/0x4b0
? unwind_next_frame+0x819/0x8f0
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
__dev_queue_xmit+0x722/0xca0
? unwind_get_return_address_ptr+0x50/0x50
? netdev_pick_tx+0xe0/0xe0
? save_stack+0x8c/0xb0
? kasan_kmalloc+0xbe/0xd0
? __kmalloc_track_caller+0xe4/0x1c0
? __kmalloc_reserve.isra.45+0x24/0x70
? __alloc_skb+0xdd/0x2e0
? sk_stream_alloc_skb+0x91/0x3b0
? tcp_sendmsg_locked+0x71b/0x15a0
? tcp_sendmsg+0x22/0x40
? __sys_sendto+0x1b0/0x250
? __x64_sys_sendto+0x6f/0x80
? do_syscall_64+0x5d/0x150
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
? __sys_sendto+0x1b0/0x250
? __x64_sys_sendto+0x6f/0x80
? do_syscall_64+0x5d/0x150
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
ip_finish_output2+0x495/0x590
? ip_copy_metadata+0x2e0/0x2e0
? skb_gso_validate_network_len+0x6f/0x110
? ip_finish_output+0x174/0x280
__tcp_transmit_skb+0xb17/0x12b0
? __tcp_select_window+0x380/0x380
tcp_write_xmit+0x913/0x1de0
? __sk_mem_schedule+0x50/0x80
tcp_sendmsg_locked+0x49d/0x15a0
? tcp_rcv_established+0x8da/0xa30
? tcp_set_state+0x220/0x220
? clear_user+0x1f/0x50
? iov_iter_zero+0x1ae/0x590
? __fget_light+0xa0/0xe0
tcp_sendmsg+0x22/0x40
__sys_sendto+0x1b0/0x250
? __ia32_sys_getpeername+0x40/0x40
? _copy_to_user+0x58/0x70
? poll_select_copy_remaining+0x176/0x200
? __pollwait+0x1c0/0x1c0
? ktime_get_ts64+0x11f/0x140
? kern_select+0x108/0x150
? core_sys_select+0x360/0x360
? vfs_read+0x127/0x150
? kernel_write+0x90/0x90
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x5d/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fefef2b129d
Code: ff ff ff ff eb b6 0f 1f 80 00 00 00 00 48 8d 05 51 37 0c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41
RSP: 002b:00007fff2f5350c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000056118d60c120 RCX: 00007fefef2b129d
RDX: 0000000000002000 RSI: 000056118d629320 RDI: 0000000000000003
RBP: 000056118d530370 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000002000
R13: 000056118d5c2a10 R14: 000056118d5c2a10 R15: 000056118d5303b8
tcf_sample_act() tried to update its per-cpu stats, but tcf_sample_init()
forgot to allocate them, because tcf_idr_create() was called with a wrong
value of 'cpustats'. Setting it to true proved to fix the reported crash.
Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/act_sample.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sched/act_sample.c
+++ b/net/sched/act_sample.c
@@ -64,7 +64,7 @@ static int tcf_sample_init(struct net *n
if (!exists) {
ret = tcf_idr_create(tn, parm->index, est, a,
- &act_sample_ops, bind, false);
+ &act_sample_ops, bind, true);
if (ret)
return ret;
ret = ACT_P_CREATED;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 14/88] hv_netvsc: fix schedule in RCU context
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 13/88] net/sched: act_sample: fix NULL dereference in the data path Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 15/88] net: dsa: mv88e6xxx: Fix ATU Miss Violation Greg Kroah-Hartman
` (77 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephen Hemminger, Haiyang Zhang,
David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Hemminger <stephen@networkplumber.org>
[ Upstream commit 018349d70f28a78d5343b3660cb66e1667005f8a ]
When netvsc device is removed it can call reschedule in RCU context.
This happens because canceling the subchannel setup work could (in theory)
cause a reschedule when manipulating the timer.
To reproduce, run with lockdep enabled kernel and unbind
a network device from hv_netvsc (via sysfs).
[ 160.682011] WARNING: suspicious RCU usage
[ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted
[ 160.709937] -----------------------------
[ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[ 160.723691]
[ 160.723691] other info that might help us debug this:
[ 160.723691]
[ 160.730955]
[ 160.730955] rcu_scheduler_active = 2, debug_locks = 1
[ 160.762813] 5 locks held by rebind-eth.sh/1812:
[ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0
[ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0
[ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0
[ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250
[ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc]
[ 160.828629]
[ 160.828629] stack backtrace:
[ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2
[ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[ 160.832952] Call Trace:
[ 160.832952] dump_stack+0x85/0xcb
[ 160.832952] ___might_sleep+0x1a3/0x240
[ 160.832952] __flush_work+0x57/0x2e0
[ 160.832952] ? __mutex_lock+0x83/0x990
[ 160.832952] ? __kernfs_remove+0x24f/0x2e0
[ 160.832952] ? __kernfs_remove+0x1b2/0x2e0
[ 160.832952] ? mark_held_locks+0x50/0x80
[ 160.832952] ? get_work_pool+0x90/0x90
[ 160.832952] __cancel_work_timer+0x13c/0x1e0
[ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc]
[ 160.832952] ? __lock_is_held+0x55/0x90
[ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc]
[ 160.832952] vmbus_remove+0x26/0x30
[ 160.832952] device_release_driver_internal+0x18a/0x250
[ 160.832952] unbind_store+0xb4/0x180
[ 160.832952] kernfs_fop_write+0x113/0x1a0
[ 160.832952] __vfs_write+0x36/0x1a0
[ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80
[ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60
[ 160.832952] ? __sb_start_write+0x141/0x1a0
[ 160.832952] ? vfs_write+0x184/0x1b0
[ 160.832952] vfs_write+0xbe/0x1b0
[ 160.832952] ksys_write+0x55/0xc0
[ 160.832952] do_syscall_64+0x60/0x1b0
[ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 160.832952] RIP: 0033:0x7fe48f4c8154
Resolve this by getting RTNL earlier. This is safe because the subchannel
work queue does trylock on RTNL and will detect the race.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/hyperv/netvsc_drv.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -2172,17 +2172,15 @@ static int netvsc_remove(struct hv_devic
cancel_delayed_work_sync(&ndev_ctx->dwork);
- rcu_read_lock();
- nvdev = rcu_dereference(ndev_ctx->nvdev);
-
- if (nvdev)
+ rtnl_lock();
+ nvdev = rtnl_dereference(ndev_ctx->nvdev);
+ if (nvdev)
cancel_work_sync(&nvdev->subchan_work);
/*
* Call to the vsc driver to let it know that the device is being
* removed. Also blocks mtu and channel changes.
*/
- rtnl_lock();
vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev);
if (vf_netdev)
netvsc_unregister_vf(vf_netdev);
@@ -2194,7 +2192,6 @@ static int netvsc_remove(struct hv_devic
list_del(&ndev_ctx->list);
rtnl_unlock();
- rcu_read_unlock();
hv_set_drvdata(dev, NULL);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 15/88] net: dsa: mv88e6xxx: Fix ATU Miss Violation
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 14/88] hv_netvsc: fix schedule in RCU context Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 16/88] socket: fix struct ifreq size in compat ioctl Greg Kroah-Hartman
` (76 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andrew Lunn, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <andrew@lunn.ch>
[ Upstream commit ddca24dfcf1bec608668dd44c45d49397b70f520 ]
Fix a cut/paste error and a typo which results in ATU miss violations
not being reported.
Fixes: 0977644c5005 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/mv88e6xxx/global1.h | 2 +-
drivers/net/dsa/mv88e6xxx/global1_atu.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -128,7 +128,7 @@
#define MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION 0x7000
#define MV88E6XXX_G1_ATU_OP_AGE_OUT_VIOLATION BIT(7)
#define MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION BIT(6)
-#define MV88E6XXX_G1_ATU_OP_MISS_VIOLTATION BIT(5)
+#define MV88E6XXX_G1_ATU_OP_MISS_VIOLATION BIT(5)
#define MV88E6XXX_G1_ATU_OP_FULL_VIOLATION BIT(4)
/* Offset 0x0C: ATU Data Register */
--- a/drivers/net/dsa/mv88e6xxx/global1_atu.c
+++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c
@@ -349,7 +349,7 @@ static irqreturn_t mv88e6xxx_g1_atu_prob
chip->ports[entry.portvec].atu_member_violation++;
}
- if (val & MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION) {
+ if (val & MV88E6XXX_G1_ATU_OP_MISS_VIOLATION) {
dev_err_ratelimited(chip->dev,
"ATU miss violation for %pM portvec %x\n",
entry.mac, entry.portvec);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 16/88] socket: fix struct ifreq size in compat ioctl
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 15/88] net: dsa: mv88e6xxx: Fix ATU Miss Violation Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 17/88] tls: fix currently broken MSG_PEEK behavior Greg Kroah-Hartman
` (75 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Robert OCallahan, Johannes Berg,
David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <johannes.berg@intel.com>
[ Upstream commit 1cebf8f143c21eb422cd0f4e27ab2ae366eb4d04 ]
As reported by Reobert O'Callahan, since Viro's commit to kill
dev_ifsioc() we attempt to copy too much data in compat mode,
which may lead to EFAULT when the 32-bit version of struct ifreq
sits at/near the end of a page boundary, and the next page isn't
mapped.
Fix this by passing the approprate compat/non-compat size to copy
and using that, as before the dev_ifsioc() removal. This works
because only the embedded "struct ifmap" has different size, and
this is only used in SIOCGIFMAP/SIOCSIFMAP which has a different
handler. All other parts of the union are naturally compatible.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199469.
Fixes: bf4405737f9f ("kill dev_ifsioc()")
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/socket.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
--- a/net/socket.c
+++ b/net/socket.c
@@ -962,7 +962,8 @@ void dlci_ioctl_set(int (*hook) (unsigne
EXPORT_SYMBOL(dlci_ioctl_set);
static long sock_do_ioctl(struct net *net, struct socket *sock,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg,
+ unsigned int ifreq_size)
{
int err;
void __user *argp = (void __user *)arg;
@@ -988,11 +989,11 @@ static long sock_do_ioctl(struct net *ne
} else {
struct ifreq ifr;
bool need_copyout;
- if (copy_from_user(&ifr, argp, sizeof(struct ifreq)))
+ if (copy_from_user(&ifr, argp, ifreq_size))
return -EFAULT;
err = dev_ioctl(net, cmd, &ifr, &need_copyout);
if (!err && need_copyout)
- if (copy_to_user(argp, &ifr, sizeof(struct ifreq)))
+ if (copy_to_user(argp, &ifr, ifreq_size))
return -EFAULT;
}
return err;
@@ -1091,7 +1092,8 @@ static long sock_ioctl(struct file *file
err = open_related_ns(&net->ns, get_net_ns);
break;
default:
- err = sock_do_ioctl(net, sock, cmd, arg);
+ err = sock_do_ioctl(net, sock, cmd, arg,
+ sizeof(struct ifreq));
break;
}
return err;
@@ -2762,7 +2764,8 @@ static int do_siocgstamp(struct net *net
int err;
set_fs(KERNEL_DS);
- err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv);
+ err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv,
+ sizeof(struct compat_ifreq));
set_fs(old_fs);
if (!err)
err = compat_put_timeval(&ktv, up);
@@ -2778,7 +2781,8 @@ static int do_siocgstampns(struct net *n
int err;
set_fs(KERNEL_DS);
- err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts);
+ err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts,
+ sizeof(struct compat_ifreq));
set_fs(old_fs);
if (!err)
err = compat_put_timespec(&kts, up);
@@ -3084,7 +3088,8 @@ static int routing_ioctl(struct net *net
}
set_fs(KERNEL_DS);
- ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r);
+ ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r,
+ sizeof(struct compat_ifreq));
set_fs(old_fs);
out:
@@ -3197,7 +3202,8 @@ static int compat_sock_ioctl_trans(struc
case SIOCBONDSETHWADDR:
case SIOCBONDCHANGEACTIVE:
case SIOCGIFNAME:
- return sock_do_ioctl(net, sock, cmd, arg);
+ return sock_do_ioctl(net, sock, cmd, arg,
+ sizeof(struct compat_ifreq));
}
return -ENOIOCTLCMD;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 17/88] tls: fix currently broken MSG_PEEK behavior
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 16/88] socket: fix struct ifreq size in compat ioctl Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:02 ` [PATCH 4.18 18/88] bnxt_en: Fix VF mac address regression Greg Kroah-Hartman
` (74 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Borkmann, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <daniel@iogearbox.net>
[ Upstream commit 50c6b58a814d86a93c0f6964570f839632854044 ]
In kTLS MSG_PEEK behavior is currently failing, strace example:
[pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
[pid 2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2430] listen(4, 10) = 0
[pid 2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
[pid 2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
[pid 2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2430] close(4) = 0
[pid 2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
[pid 2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
[pid 2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64
As can be seen from strace, there are two TLS records sent,
i) 'test_read_peek' and ii) '_mult_recs\0' where we end up
peeking 'test_read_peektest_read_peektest'. This is clearly
wrong, and what happens is that given peek cannot call into
tls_sw_advance_skb() to unpause strparser and proceed with
the next skb, we end up looping over the current one, copying
the 'test_read_peek' over and over into the user provided
buffer.
Here, we can only peek into the currently held skb (current,
full TLS record) as otherwise we would end up having to hold
all the original skb(s) (depending on the peek depth) in a
separate queue when unpausing strparser to process next
records, minimally intrusive is to return only up to the
current record's size (which likely was what c46234ebb4d1
("tls: RX path for ktls") originally intended as well). Thus,
after patch we properly peek the first record:
[pid 2046] wait4(2075, <unfinished ...>
[pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
[pid 2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2075] listen(4, 10) = 0
[pid 2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
[pid 2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
[pid 2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2075] close(4) = 0
[pid 2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
[pid 2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
[pid 2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tls/tls_sw.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -872,7 +872,15 @@ fallback_to_reg_recv:
if (control != TLS_RECORD_TYPE_DATA)
goto recv_end;
}
+ } else {
+ /* MSG_PEEK right now cannot look beyond current skb
+ * from strparser, meaning we cannot advance skb here
+ * and thus unpause strparser since we'd loose original
+ * one.
+ */
+ break;
}
+
/* If we have a new message from strparser, continue now. */
if (copied >= target && !ctx->recv_pkt)
break;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 18/88] bnxt_en: Fix VF mac address regression.
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 17/88] tls: fix currently broken MSG_PEEK behavior Greg Kroah-Hartman
@ 2018-09-27 9:02 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 19/88] ipv6: use rt6_info members when dst is set in rt6_fill_node Greg Kroah-Hartman
` (73 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:02 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Seth Forshee, Siwei Liu,
Michael Chan, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <michael.chan@broadcom.com>
[ Upstream commit 28ea334bd1657f3c43485b4a8592672fc6835fac ]
The recent commit to always forward the VF MAC address to the PF for
approval may not work if the PF driver or the firmware is older. This
will cause the VF driver to fail during probe:
bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff
bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF
bnxt_en 0000:00:03.0: Unable to initialize mac address.
bnxt_en: probe of 0000:00:03.0 failed with error -99
We fix it by treating the error as fatal only if the VF MAC address is
locally generated by the VF.
Fixes: 707e7e966026 ("bnxt_en: Always forward VF MAC address to the PF.")
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Reported-by: Siwei Liu <loseweigh@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +++++++--
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 9 +++++----
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h | 2 +-
3 files changed, 13 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -7888,7 +7888,7 @@ static int bnxt_change_mac_addr(struct n
if (ether_addr_equal(addr->sa_data, dev->dev_addr))
return 0;
- rc = bnxt_approve_mac(bp, addr->sa_data);
+ rc = bnxt_approve_mac(bp, addr->sa_data, true);
if (rc)
return rc;
@@ -8683,14 +8683,19 @@ static int bnxt_init_mac_addr(struct bnx
} else {
#ifdef CONFIG_BNXT_SRIOV
struct bnxt_vf_info *vf = &bp->vf;
+ bool strict_approval = true;
if (is_valid_ether_addr(vf->mac_addr)) {
/* overwrite netdev dev_addr with admin VF MAC */
memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN);
+ /* Older PF driver or firmware may not approve this
+ * correctly.
+ */
+ strict_approval = false;
} else {
eth_hw_addr_random(bp->dev);
}
- rc = bnxt_approve_mac(bp, bp->dev->dev_addr);
+ rc = bnxt_approve_mac(bp, bp->dev->dev_addr, strict_approval);
#endif
}
return rc;
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -1095,7 +1095,7 @@ update_vf_mac_exit:
mutex_unlock(&bp->hwrm_cmd_lock);
}
-int bnxt_approve_mac(struct bnxt *bp, u8 *mac)
+int bnxt_approve_mac(struct bnxt *bp, u8 *mac, bool strict)
{
struct hwrm_func_vf_cfg_input req = {0};
int rc = 0;
@@ -1113,12 +1113,13 @@ int bnxt_approve_mac(struct bnxt *bp, u8
memcpy(req.dflt_mac_addr, mac, ETH_ALEN);
rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
mac_done:
- if (rc) {
+ if (rc && strict) {
rc = -EADDRNOTAVAIL;
netdev_warn(bp->dev, "VF MAC address %pM not approved by the PF\n",
mac);
+ return rc;
}
- return rc;
+ return 0;
}
#else
@@ -1135,7 +1136,7 @@ void bnxt_update_vf_mac(struct bnxt *bp)
{
}
-int bnxt_approve_mac(struct bnxt *bp, u8 *mac)
+int bnxt_approve_mac(struct bnxt *bp, u8 *mac, bool strict)
{
return 0;
}
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h
@@ -39,5 +39,5 @@ int bnxt_sriov_configure(struct pci_dev
void bnxt_sriov_disable(struct bnxt *);
void bnxt_hwrm_exec_fwd_req(struct bnxt *);
void bnxt_update_vf_mac(struct bnxt *);
-int bnxt_approve_mac(struct bnxt *, u8 *);
+int bnxt_approve_mac(struct bnxt *, u8 *, bool);
#endif
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 19/88] ipv6: use rt6_info members when dst is set in rt6_fill_node
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2018-09-27 9:02 ` [PATCH 4.18 18/88] bnxt_en: Fix VF mac address regression Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 20/88] net/ipv6: do not copy dst flags on rt init Greg Kroah-Hartman
` (72 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jianlin Shi, Xin Long, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <lucien.xin@gmail.com>
[ Upstream commit 22d0bd82cc7cec7d9ed4bd5913f3ab65643364be ]
In inet6_rtm_getroute, since Commit 93531c674315 ("net/ipv6: separate
handling of FIB entries from dst based routes"), it has used rt->from
to dump route info instead of rt.
However for some route like cache, some of its information like flags
or gateway is not the same as that of the 'from' one. It caused 'ip
route get' to dump the wrong route information.
In Jianlin's testing, the output information even lost the expiration
time for a pmtu route cache due to the wrong fib6_flags.
So change to use rt6_info members for dst addr, src addr, flags and
gateway when it tries to dump a route entry without fibmatch set.
v1->v2:
- not use rt6i_prefsrc.
- also fix the gw dump issue.
Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/route.c | 42 ++++++++++++++++++++++++++++++------------
1 file changed, 30 insertions(+), 12 deletions(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4670,20 +4670,31 @@ static int rt6_fill_node(struct net *net
int iif, int type, u32 portid, u32 seq,
unsigned int flags)
{
- struct rtmsg *rtm;
+ struct rt6_info *rt6 = (struct rt6_info *)dst;
+ struct rt6key *rt6_dst, *rt6_src;
+ u32 *pmetrics, table, rt6_flags;
struct nlmsghdr *nlh;
+ struct rtmsg *rtm;
long expires = 0;
- u32 *pmetrics;
- u32 table;
nlh = nlmsg_put(skb, portid, seq, type, sizeof(*rtm), flags);
if (!nlh)
return -EMSGSIZE;
+ if (rt6) {
+ rt6_dst = &rt6->rt6i_dst;
+ rt6_src = &rt6->rt6i_src;
+ rt6_flags = rt6->rt6i_flags;
+ } else {
+ rt6_dst = &rt->fib6_dst;
+ rt6_src = &rt->fib6_src;
+ rt6_flags = rt->fib6_flags;
+ }
+
rtm = nlmsg_data(nlh);
rtm->rtm_family = AF_INET6;
- rtm->rtm_dst_len = rt->fib6_dst.plen;
- rtm->rtm_src_len = rt->fib6_src.plen;
+ rtm->rtm_dst_len = rt6_dst->plen;
+ rtm->rtm_src_len = rt6_src->plen;
rtm->rtm_tos = 0;
if (rt->fib6_table)
table = rt->fib6_table->tb6_id;
@@ -4698,7 +4709,7 @@ static int rt6_fill_node(struct net *net
rtm->rtm_scope = RT_SCOPE_UNIVERSE;
rtm->rtm_protocol = rt->fib6_protocol;
- if (rt->fib6_flags & RTF_CACHE)
+ if (rt6_flags & RTF_CACHE)
rtm->rtm_flags |= RTM_F_CLONED;
if (dest) {
@@ -4706,7 +4717,7 @@ static int rt6_fill_node(struct net *net
goto nla_put_failure;
rtm->rtm_dst_len = 128;
} else if (rtm->rtm_dst_len)
- if (nla_put_in6_addr(skb, RTA_DST, &rt->fib6_dst.addr))
+ if (nla_put_in6_addr(skb, RTA_DST, &rt6_dst->addr))
goto nla_put_failure;
#ifdef CONFIG_IPV6_SUBTREES
if (src) {
@@ -4714,12 +4725,12 @@ static int rt6_fill_node(struct net *net
goto nla_put_failure;
rtm->rtm_src_len = 128;
} else if (rtm->rtm_src_len &&
- nla_put_in6_addr(skb, RTA_SRC, &rt->fib6_src.addr))
+ nla_put_in6_addr(skb, RTA_SRC, &rt6_src->addr))
goto nla_put_failure;
#endif
if (iif) {
#ifdef CONFIG_IPV6_MROUTE
- if (ipv6_addr_is_multicast(&rt->fib6_dst.addr)) {
+ if (ipv6_addr_is_multicast(&rt6_dst->addr)) {
int err = ip6mr_get_route(net, skb, rtm, portid);
if (err == 0)
@@ -4754,7 +4765,14 @@ static int rt6_fill_node(struct net *net
/* For multipath routes, walk the siblings list and add
* each as a nexthop within RTA_MULTIPATH.
*/
- if (rt->fib6_nsiblings) {
+ if (rt6) {
+ if (rt6_flags & RTF_GATEWAY &&
+ nla_put_in6_addr(skb, RTA_GATEWAY, &rt6->rt6i_gateway))
+ goto nla_put_failure;
+
+ if (dst->dev && nla_put_u32(skb, RTA_OIF, dst->dev->ifindex))
+ goto nla_put_failure;
+ } else if (rt->fib6_nsiblings) {
struct fib6_info *sibling, *next_sibling;
struct nlattr *mp;
@@ -4777,7 +4795,7 @@ static int rt6_fill_node(struct net *net
goto nla_put_failure;
}
- if (rt->fib6_flags & RTF_EXPIRES) {
+ if (rt6_flags & RTF_EXPIRES) {
expires = dst ? dst->expires : rt->expires;
expires -= jiffies;
}
@@ -4785,7 +4803,7 @@ static int rt6_fill_node(struct net *net
if (rtnl_put_cacheinfo(skb, dst, 0, expires, dst ? dst->error : 0) < 0)
goto nla_put_failure;
- if (nla_put_u8(skb, RTA_PREF, IPV6_EXTRACT_PREF(rt->fib6_flags)))
+ if (nla_put_u8(skb, RTA_PREF, IPV6_EXTRACT_PREF(rt6_flags)))
goto nla_put_failure;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 20/88] net/ipv6: do not copy dst flags on rt init
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 19/88] ipv6: use rt6_info members when dst is set in rt6_fill_node Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 21/88] net: mvpp2: let phylink manage the carrier state Greg Kroah-Hartman
` (71 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Ahern, Wei Wang,
Peter Oskolkov, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Oskolkov <posk@google.com>
[ Upstream commit 30bfd93062814d6767e452a8f5ddcd97f7e38c7e ]
DST_NOCOUNT in dst_entry::flags tracks whether the entry counts
toward route cache size (net->ipv6.sysctl.ip6_rt_max_size).
If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented
in dist_init() and decremented in dst_destroy().
This flag is tied to allocation/deallocation of dst_entry and
should not be copied from another dst/route. Otherwise it can happen
that dst_ops::pcpuc_entries counter grows until no new routes can
be allocated because the counter reached ip6_rt_max_size due to
DST_NOCOUNT not set and thus no counter decrements on gc-ed routes.
Fixes: 3b6761d18bc1 ("net/ipv6: Move dst flags to booleans in fib entries")
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/route.c | 2 --
1 file changed, 2 deletions(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -946,8 +946,6 @@ static void ip6_rt_init_dst_reject(struc
static void ip6_rt_init_dst(struct rt6_info *rt, struct fib6_info *ort)
{
- rt->dst.flags |= fib6_info_dst_flags(ort);
-
if (ort->fib6_flags & RTF_REJECT) {
ip6_rt_init_dst_reject(rt, ort);
return;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 21/88] net: mvpp2: let phylink manage the carrier state
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 20/88] net/ipv6: do not copy dst flags on rt init Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 22/88] net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags Greg Kroah-Hartman
` (70 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Russell King, Antoine Tenart,
David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Antoine Tenart <antoine.tenart@bootlin.com>
[ Upstream commit 41948ccb4a856dddacfbd4d789d4fa8663fe41bb ]
Net drivers using phylink shouldn't mess with the link carrier
themselves and should let phylink manage it. The mvpp2 driver wasn't
following this best practice as the mac_config() function made calls to
change the link carrier state. This led to wrongly reported carrier link
state which then triggered other issues. This patch fixes this
behaviour.
But the PPv2 driver relied on this misbehaviour in two cases: for fixed
links and when not using phylink (ACPI mode). The later was fixed by
adding an explicit call to link_up(), which when the ACPI mode will use
phylink should be removed.
The fixed link case was relying on the mac_config() function to set the
link up, as we found an issue in phylink_start() which assumes the
carrier is off. If not, the link_up() function is never called. To fix
this, a call to netif_carrier_off() is added just before phylink_start()
so that we do not introduce a regression in the driver.
Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -61,6 +61,8 @@ static struct {
*/
static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
const struct phylink_link_state *state);
+static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phy);
/* Queue modes */
#define MVPP2_QDIST_SINGLE_MODE 0
@@ -3142,6 +3144,7 @@ static void mvpp2_start_dev(struct mvpp2
mvpp22_mode_reconfigure(port);
if (port->phylink) {
+ netif_carrier_off(port->dev);
phylink_start(port->phylink);
} else {
/* Phylink isn't used as of now for ACPI, so the MAC has to be
@@ -3150,9 +3153,10 @@ static void mvpp2_start_dev(struct mvpp2
*/
struct phylink_link_state state = {
.interface = port->phy_interface,
- .link = 1,
};
mvpp2_mac_config(port->dev, MLO_AN_INBAND, &state);
+ mvpp2_mac_link_up(port->dev, MLO_AN_INBAND, port->phy_interface,
+ NULL);
}
netif_tx_start_all_queues(port->dev);
@@ -4389,10 +4393,6 @@ static void mvpp2_mac_config(struct net_
return;
}
- netif_tx_stop_all_queues(port->dev);
- if (!port->has_phy)
- netif_carrier_off(port->dev);
-
/* Make sure the port is disabled when reconfiguring the mode */
mvpp2_port_disable(port);
@@ -4417,16 +4417,7 @@ static void mvpp2_mac_config(struct net_
if (port->priv->hw_version == MVPP21 && port->flags & MVPP2_F_LOOPBACK)
mvpp2_port_loopback_set(port, state);
- /* If the port already was up, make sure it's still in the same state */
- if (state->link || !port->has_phy) {
- mvpp2_port_enable(port);
-
- mvpp2_egress_enable(port);
- mvpp2_ingress_enable(port);
- if (!port->has_phy)
- netif_carrier_on(dev);
- netif_tx_wake_all_queues(dev);
- }
+ mvpp2_port_enable(port);
}
static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode,
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 22/88] net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 21/88] net: mvpp2: let phylink manage the carrier state Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 23/88] NFC: Fix possible memory corruption when handling SHDLC I-Frame commands Greg Kroah-Hartman
` (69 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liam mcbirnie, Roopa Prabhu, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roopa Prabhu <roopa@cumulusnetworks.com>
[ Upstream commit 56a49d7048703f5ffdb84d3a0ee034108fba6850 ]
This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071
Commit 5025f7f7d506 wrongly relied on __dev_change_flags to notify users of
dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED.
Fix it by indicating flag changes explicitly to __dev_notify_flags.
Fixes: 5025f7f7d506 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link")
Reported-By: Liam mcbirnie <liam.mcbirnie@boeing.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/rtnetlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2760,7 +2760,7 @@ int rtnl_configure_link(struct net_devic
}
if (dev->rtnl_link_state == RTNL_LINK_INITIALIZED) {
- __dev_notify_flags(dev, old_flags, 0U);
+ __dev_notify_flags(dev, old_flags, (old_flags ^ dev->flags));
} else {
dev->rtnl_link_state = RTNL_LINK_INITIALIZED;
__dev_notify_flags(dev, old_flags, ~0U);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 23/88] NFC: Fix possible memory corruption when handling SHDLC I-Frame commands
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 22/88] net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 24/88] NFC: Fix the number of pipes Greg Kroah-Hartman
` (68 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Samuel Ortiz, Allen Pais,
David S. Miller, Kevin Deus, Suren Baghdasaryan, Kees Cook
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suren Baghdasaryan <surenb@google.com>
commit 674d9de02aa7d521ebdf66c3958758bdd9c64e11 upstream.
When handling SHDLC I-Frame commands "pipe" field used for indexing
into an array should be checked before usage. If left unchecked it
might access memory outside of the array of size NFC_HCI_MAX_PIPES(127).
Malformed NFC HCI frames could be injected by a malicious NFC device
communicating with the device being attacked (remote attack vector),
or even by an attacker with physical access to the I2C bus such that
they could influence the data transfers on that bus (local attack vector).
skb->data is controlled by the attacker and has only been sanitized in
the most trivial ways (CRC check), therefore we can consider the
create_info struct and all of its members to tainted. 'create_info->pipe'
with max value of 255 (uint8) is used to take an offset of the
hdev->pipes array of 127 elements which can lead to OOB write.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Allen Pais <allen.pais@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Suggested-by: Kevin Deus <kdeus@google.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/nfc/hci/core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/net/nfc/hci/core.c
+++ b/net/nfc/hci/core.c
@@ -209,6 +209,11 @@ void nfc_hci_cmd_received(struct nfc_hci
}
create_info = (struct hci_create_pipe_resp *)skb->data;
+ if (create_info->pipe >= NFC_HCI_MAX_PIPES) {
+ status = NFC_HCI_ANY_E_NOK;
+ goto exit;
+ }
+
/* Save the new created pipe and bind with local gate,
* the description for skb->data[3] is destination gate id
* but since we received this cmd from host controller, we
@@ -232,6 +237,11 @@ void nfc_hci_cmd_received(struct nfc_hci
}
delete_info = (struct hci_delete_pipe_noti *)skb->data;
+ if (delete_info->pipe >= NFC_HCI_MAX_PIPES) {
+ status = NFC_HCI_ANY_E_NOK;
+ goto exit;
+ }
+
hdev->pipes[delete_info->pipe].gate = NFC_HCI_INVALID_GATE;
hdev->pipes[delete_info->pipe].dest_host = NFC_HCI_INVALID_HOST;
break;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 24/88] NFC: Fix the number of pipes
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 23/88] NFC: Fix possible memory corruption when handling SHDLC I-Frame commands Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 25/88] ASoC: wm9712: fix replace codec to component Greg Kroah-Hartman
` (67 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Samuel Ortiz, Allen Pais,
David S. Miller, Dan Carpenter, Suren Baghdasaryan, Kees Cook
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suren Baghdasaryan <surenb@google.com>
commit e285d5bfb7e9785d289663baef252dd315e171f8 upstream.
According to ETSI TS 102 622 specification chapter 4.4 pipe identifier
is 7 bits long which allows for 128 unique pipe IDs. Because
NFC_HCI_MAX_PIPES is used as the number of pipes supported and not
as the max pipe ID, its value should be 128 instead of 127.
nfc_hci_recv_from_llc extracts pipe ID from packet header using
NFC_HCI_FRAGMENT(0x7F) mask which allows for pipe ID value of 127.
Same happens when NCI_HCP_MSG_GET_PIPE() is being used. With
pipes array having only 127 elements and pipe ID of 127 the OOB memory
access will result.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Allen Pais <allen.pais@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/nfc/hci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/net/nfc/hci.h
+++ b/include/net/nfc/hci.h
@@ -87,7 +87,7 @@ struct nfc_hci_pipe {
* According to specification 102 622 chapter 4.4 Pipes,
* the pipe identifier is 7 bits long.
*/
-#define NFC_HCI_MAX_PIPES 127
+#define NFC_HCI_MAX_PIPES 128
struct nfc_hci_init_data {
u8 gate_count;
struct nfc_hci_gate gates[NFC_HCI_MAX_CUSTOM_GATES];
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 25/88] ASoC: wm9712: fix replace codec to component
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 24/88] NFC: Fix the number of pipes Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 26/88] ASoC: cs4265: fix MMTLR Data switch control Greg Kroah-Hartman
` (66 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marcel Ziswiler, Charles Keepax, Mark Brown
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
commit 5e4cfadaf5b73a0801b2fa7fb007f98400ebfe6e upstream.
Since commit 143b44845d87 ("ASoC: wm9712: replace codec to component")
"wm9712-codec" got renamed to "wm9712-component", however, this change
never got propagated down to the actual board/platform drivers. E.g. on
Colibri T20 this lead to the following spew upon boot with sound/touch
being broken:
[ 2.214121] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 2.222137] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 2.344384] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 2.351885] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 2.668339] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 2.675811] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 3.208408] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 3.216312] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 3.235397] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 3.248938] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 14.970443] ALSA device list:
[ 14.996628] No soundcards found.
This commit finally fixes this again.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/codecs/wm9712.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -719,7 +719,7 @@ static int wm9712_probe(struct platform_
static struct platform_driver wm9712_component_driver = {
.driver = {
- .name = "wm9712-component",
+ .name = "wm9712-codec",
},
.probe = wm9712_probe,
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 26/88] ASoC: cs4265: fix MMTLR Data switch control
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 25/88] ASoC: wm9712: fix replace codec to component Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 27/88] ASoC: tas6424: Save last fault register even when clear Greg Kroah-Hartman
` (65 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sébastien Szymanski, Mark Brown
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
commit 90a3b7f8aba3011badacd6d8121e03aa24ac79d1 upstream.
The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0
and not at address 0x0 bit 1. Fix this.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/codecs/cs4265.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/codecs/cs4265.c
+++ b/sound/soc/codecs/cs4265.c
@@ -157,8 +157,8 @@ static const struct snd_kcontrol_new cs4
SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2,
3, 1, 0),
SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum),
- SOC_SINGLE("MMTLR Data Switch", 0,
- 1, 1, 0),
+ SOC_SINGLE("MMTLR Data Switch", CS4265_SPDIF_CTL2,
+ 0, 1, 0),
SOC_ENUM("Mono Channel Select", spdif_mono_select_enum),
SND_SOC_BYTES("C Data Buffer", CS4265_C_DATA_BUFF, 24),
};
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 27/88] ASoC: tas6424: Save last fault register even when clear
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 26/88] ASoC: cs4265: fix MMTLR Data switch control Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 28/88] ASoC: rsnd: fixup not to call clk_get/set under non-atomic Greg Kroah-Hartman
` (64 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andrew F. Davis, Mark Brown
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew F. Davis <afd@ti.com>
commit d40e3e9e44db4b3c8777f3b515ba6097ba26e3b2 upstream.
When there is no fault bit set in a fault register we skip the fault
reporting section for that register. This also skips over saving that
registers value. We save the value so we will not double report an
error, but if an error clears then returns we will also not report it
as we did not save the all cleared register value. Fix this by saving
the fault register value in the all clear path.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/codecs/tas6424.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/sound/soc/codecs/tas6424.c
+++ b/sound/soc/codecs/tas6424.c
@@ -424,8 +424,10 @@ static void tas6424_fault_check_work(str
TAS6424_FAULT_PVDD_UV |
TAS6424_FAULT_VBAT_UV;
- if (reg)
+ if (!reg) {
+ tas6424->last_fault1 = reg;
goto check_global_fault2_reg;
+ }
/*
* Only flag errors once for a given occurrence. This is needed as
@@ -461,8 +463,10 @@ check_global_fault2_reg:
TAS6424_FAULT_OTSD_CH3 |
TAS6424_FAULT_OTSD_CH4;
- if (!reg)
+ if (!reg) {
+ tas6424->last_fault2 = reg;
goto check_warn_reg;
+ }
if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD))
dev_crit(dev, "experienced a global overtemp shutdown\n");
@@ -497,8 +501,10 @@ check_warn_reg:
TAS6424_WARN_VDD_OTW_CH3 |
TAS6424_WARN_VDD_OTW_CH4;
- if (!reg)
+ if (!reg) {
+ tas6424->last_warn = reg;
goto out;
+ }
if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV))
dev_warn(dev, "experienced a VDD under voltage condition\n");
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 28/88] ASoC: rsnd: fixup not to call clk_get/set under non-atomic
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 27/88] ASoC: tas6424: Save last fault register even when clear Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 29/88] ASoC: uapi: fix sound/skl-tplg-interface.h userspace compilation errors Greg Kroah-Hartman
` (63 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiada Wang, Timo Wischer,
Kuninori Morimoto, Hiroyuki Yokoyama, Mark Brown
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiada Wang <jiada_wang@mentor.com>
commit 4d230d12710646788af581ba0155d83ab48b955c upstream.
Clocking operations clk_get/set_rate, are non-atomic,
they shouldn't be called in soc_pcm_trigger() which is atomic.
Following issue was found due to execution of clk_get_rate() causes
sleep in soc_pcm_trigger(), which shouldn't be blocked.
We can reproduce this issue by following
> enable CONFIG_DEBUG_ATOMIC_SLEEP=y
> compile, and boot
> mount -t debugfs none /sys/kernel/debug
> while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done &
> while true; do aplay xxx; done
This patch adds support to .prepare callback, and moves non-atomic
clocking operations to it. As .prepare is non-atomic, it is always
called before trigger_start/trigger_stop.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay
INFO: lockdep is turned off.
irq event stamp: 5964
hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0
hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68
softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0
softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c
Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0
CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186
Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
Call trace:
[<ffff20000808fe48>] dump_backtrace+0x0/0x37c
[<ffff2000080901d8>] show_stack+0x14/0x1c
[<ffff2000086f4458>] dump_stack+0xfc/0x154
[<ffff2000081134a0>] ___might_sleep+0x57c/0x58c
[<ffff2000081136b8>] __might_sleep+0x208/0x21c
[<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0
[<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184
[<ffff2000087cb094>] clk_core_get_rate+0x14/0x54
[<ffff2000087cb0f4>] clk_get_rate+0x20/0x34
[<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar]
[<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar]
[<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar]
[<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4
Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[Kuninori: tidyup for upstream]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/sh/rcar/core.c | 11 +++++++++++
sound/soc/sh/rcar/rsnd.h | 7 +++++++
sound/soc/sh/rcar/ssi.c | 16 ++++++++++------
3 files changed, 28 insertions(+), 6 deletions(-)
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -953,12 +953,23 @@ static void rsnd_soc_dai_shutdown(struct
rsnd_dai_stream_quit(io);
}
+static int rsnd_soc_dai_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct rsnd_priv *priv = rsnd_dai_to_priv(dai);
+ struct rsnd_dai *rdai = rsnd_dai_to_rdai(dai);
+ struct rsnd_dai_stream *io = rsnd_rdai_to_io(rdai, substream);
+
+ return rsnd_dai_call(prepare, io, priv);
+}
+
static const struct snd_soc_dai_ops rsnd_soc_dai_ops = {
.startup = rsnd_soc_dai_startup,
.shutdown = rsnd_soc_dai_shutdown,
.trigger = rsnd_soc_dai_trigger,
.set_fmt = rsnd_soc_dai_set_fmt,
.set_tdm_slot = rsnd_soc_set_dai_tdm_slot,
+ .prepare = rsnd_soc_dai_prepare,
};
void rsnd_parse_connect_common(struct rsnd_dai *rdai,
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -283,6 +283,9 @@ struct rsnd_mod_ops {
int (*nolock_stop)(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv);
+ int (*prepare)(struct rsnd_mod *mod,
+ struct rsnd_dai_stream *io,
+ struct rsnd_priv *priv);
};
struct rsnd_dai_stream;
@@ -312,6 +315,7 @@ struct rsnd_mod {
* H 0: fallback
* H 0: hw_params
* H 0: pointer
+ * H 0: prepare
*/
#define __rsnd_mod_shift_nolock_start 0
#define __rsnd_mod_shift_nolock_stop 0
@@ -326,6 +330,7 @@ struct rsnd_mod {
#define __rsnd_mod_shift_fallback 28 /* always called */
#define __rsnd_mod_shift_hw_params 28 /* always called */
#define __rsnd_mod_shift_pointer 28 /* always called */
+#define __rsnd_mod_shift_prepare 28 /* always called */
#define __rsnd_mod_add_probe 0
#define __rsnd_mod_add_remove 0
@@ -340,6 +345,7 @@ struct rsnd_mod {
#define __rsnd_mod_add_fallback 0
#define __rsnd_mod_add_hw_params 0
#define __rsnd_mod_add_pointer 0
+#define __rsnd_mod_add_prepare 0
#define __rsnd_mod_call_probe 0
#define __rsnd_mod_call_remove 0
@@ -354,6 +360,7 @@ struct rsnd_mod {
#define __rsnd_mod_call_pointer 0
#define __rsnd_mod_call_nolock_start 0
#define __rsnd_mod_call_nolock_stop 1
+#define __rsnd_mod_call_prepare 0
#define rsnd_mod_to_priv(mod) ((mod)->priv)
#define rsnd_mod_name(mod) ((mod)->ops->name)
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -286,7 +286,7 @@ static int rsnd_ssi_master_clk_start(str
if (rsnd_ssi_is_multi_slave(mod, io))
return 0;
- if (ssi->usrcnt > 1) {
+ if (ssi->rate) {
if (ssi->rate != rate) {
dev_err(dev, "SSI parent/child should use same rate\n");
return -EINVAL;
@@ -431,7 +431,6 @@ static int rsnd_ssi_init(struct rsnd_mod
struct rsnd_priv *priv)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
- int ret;
if (!rsnd_ssi_is_run_mods(mod, io))
return 0;
@@ -440,10 +439,6 @@ static int rsnd_ssi_init(struct rsnd_mod
rsnd_mod_power_on(mod);
- ret = rsnd_ssi_master_clk_start(mod, io);
- if (ret < 0)
- return ret;
-
rsnd_ssi_config_init(mod, io);
rsnd_ssi_register_setup(mod);
@@ -846,6 +841,13 @@ static int rsnd_ssi_pio_pointer(struct r
return 0;
}
+static int rsnd_ssi_prepare(struct rsnd_mod *mod,
+ struct rsnd_dai_stream *io,
+ struct rsnd_priv *priv)
+{
+ return rsnd_ssi_master_clk_start(mod, io);
+}
+
static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.name = SSI_NAME,
.probe = rsnd_ssi_common_probe,
@@ -858,6 +860,7 @@ static struct rsnd_mod_ops rsnd_ssi_pio_
.pointer = rsnd_ssi_pio_pointer,
.pcm_new = rsnd_ssi_pcm_new,
.hw_params = rsnd_ssi_hw_params,
+ .prepare = rsnd_ssi_prepare,
};
static int rsnd_ssi_dma_probe(struct rsnd_mod *mod,
@@ -934,6 +937,7 @@ static struct rsnd_mod_ops rsnd_ssi_dma_
.pcm_new = rsnd_ssi_pcm_new,
.fallback = rsnd_ssi_fallback,
.hw_params = rsnd_ssi_hw_params,
+ .prepare = rsnd_ssi_prepare,
};
int rsnd_ssi_is_dma_mode(struct rsnd_mod *mod)
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 29/88] ASoC: uapi: fix sound/skl-tplg-interface.h userspace compilation errors
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 28/88] ASoC: rsnd: fixup not to call clk_get/set under non-atomic Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 30/88] ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path Greg Kroah-Hartman
` (62 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry V. Levin, Guenter Roeck, Mark Brown
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry V. Levin <ldv@altlinux.org>
commit fb504caae7ef85be159743bd4b08ecde269ba55f upstream.
Include <linux/types.h> and consistently use types it provides
to fix the following sound/skl-tplg-interface.h userspace compilation errors:
/usr/include/sound/skl-tplg-interface.h:146:2: error: unknown type name 'u32'
u32 set_params:2;
/usr/include/sound/skl-tplg-interface.h:147:2: error: unknown type name 'u32'
u32 rsvd:30;
/usr/include/sound/skl-tplg-interface.h:148:2: error: unknown type name 'u32'
u32 param_id;
/usr/include/sound/skl-tplg-interface.h:149:2: error: unknown type name 'u32'
u32 max;
/usr/include/sound/skl-tplg-interface.h:166:2: error: unknown type name 'u16'
u16 module_id;
/usr/include/sound/skl-tplg-interface.h:167:2: error: unknown type name 'u16'
u16 instance_id;
/usr/include/sound/skl-tplg-interface.h:171:2: error: unknown type name 'u32'
u32 channels;
/usr/include/sound/skl-tplg-interface.h:172:2: error: unknown type name 'u32'
u32 freq;
/usr/include/sound/skl-tplg-interface.h:173:2: error: unknown type name 'u32'
u32 bit_depth;
/usr/include/sound/skl-tplg-interface.h:174:2: error: unknown type name 'u32'
u32 valid_bit_depth;
/usr/include/sound/skl-tplg-interface.h:175:2: error: unknown type name 'u32'
u32 ch_cfg;
/usr/include/sound/skl-tplg-interface.h:176:2: error: unknown type name 'u32'
u32 interleaving_style;
/usr/include/sound/skl-tplg-interface.h:177:2: error: unknown type name 'u32'
u32 sample_type;
/usr/include/sound/skl-tplg-interface.h:178:2: error: unknown type name 'u32'
u32 ch_map;
/usr/include/sound/skl-tplg-interface.h:182:2: error: unknown type name 'u32'
u32 set_params:2;
/usr/include/sound/skl-tplg-interface.h:183:2: error: unknown type name 'u32'
u32 rsvd:30;
/usr/include/sound/skl-tplg-interface.h:184:2: error: unknown type name 'u32'
u32 param_id;
/usr/include/sound/skl-tplg-interface.h:185:2: error: unknown type name 'u32'
u32 caps_size;
/usr/include/sound/skl-tplg-interface.h:186:2: error: unknown type name 'u32'
u32 caps[HDA_SST_CFG_MAX];
/usr/include/sound/skl-tplg-interface.h:190:2: error: unknown type name 'u8'
u8 pipe_id;
/usr/include/sound/skl-tplg-interface.h:191:2: error: unknown type name 'u8'
u8 pipe_priority;
/usr/include/sound/skl-tplg-interface.h:192:2: error: unknown type name 'u16'
u16 conn_type:4;
/usr/include/sound/skl-tplg-interface.h:193:2: error: unknown type name 'u16'
u16 rsvd:4;
/usr/include/sound/skl-tplg-interface.h:194:2: error: unknown type name 'u16'
u16 memory_pages:8;
/usr/include/sound/skl-tplg-interface.h:200:2: error: unknown type name 'u16'
u16 module_id;
/usr/include/sound/skl-tplg-interface.h:201:2: error: unknown type name 'u16'
u16 instance_id;
/usr/include/sound/skl-tplg-interface.h:202:2: error: unknown type name 'u32'
u32 max_mcps;
/usr/include/sound/skl-tplg-interface.h:203:2: error: unknown type name 'u32'
u32 mem_pages;
/usr/include/sound/skl-tplg-interface.h:204:2: error: unknown type name 'u32'
u32 obs;
/usr/include/sound/skl-tplg-interface.h:205:2: error: unknown type name 'u32'
u32 ibs;
/usr/include/sound/skl-tplg-interface.h:206:2: error: unknown type name 'u32'
u32 vbus_id;
/usr/include/sound/skl-tplg-interface.h:208:2: error: unknown type name 'u32'
u32 max_in_queue:8;
/usr/include/sound/skl-tplg-interface.h:209:2: error: unknown type name 'u32'
u32 max_out_queue:8;
/usr/include/sound/skl-tplg-interface.h:210:2: error: unknown type name 'u32'
u32 time_slot:8;
/usr/include/sound/skl-tplg-interface.h:211:2: error: unknown type name 'u32'
u32 core_id:4;
/usr/include/sound/skl-tplg-interface.h:212:2: error: unknown type name 'u32'
u32 rsvd1:4;
/usr/include/sound/skl-tplg-interface.h:214:2: error: unknown type name 'u32'
u32 module_type:8;
/usr/include/sound/skl-tplg-interface.h:215:2: error: unknown type name 'u32'
u32 conn_type:4;
/usr/include/sound/skl-tplg-interface.h:216:2: error: unknown type name 'u32'
u32 dev_type:4;
/usr/include/sound/skl-tplg-interface.h:217:2: error: unknown type name 'u32'
u32 hw_conn_type:4;
/usr/include/sound/skl-tplg-interface.h:218:2: error: unknown type name 'u32'
u32 rsvd2:12;
/usr/include/sound/skl-tplg-interface.h:220:2: error: unknown type name 'u32'
u32 params_fixup:8;
/usr/include/sound/skl-tplg-interface.h:221:2: error: unknown type name 'u32'
u32 converter:8;
/usr/include/sound/skl-tplg-interface.h:222:2: error: unknown type name 'u32'
u32 input_pin_type:1;
/usr/include/sound/skl-tplg-interface.h:223:2: error: unknown type name 'u32'
u32 output_pin_type:1;
/usr/include/sound/skl-tplg-interface.h:224:2: error: unknown type name 'u32'
u32 is_dynamic_in_pin:1;
/usr/include/sound/skl-tplg-interface.h:225:2: error: unknown type name 'u32'
u32 is_dynamic_out_pin:1;
/usr/include/sound/skl-tplg-interface.h:226:2: error: unknown type name 'u32'
u32 is_loadable:1;
/usr/include/sound/skl-tplg-interface.h:227:2: error: unknown type name 'u32'
u32 rsvd3:11;
Fixes: 0c24fdc00244 ("ASoC: topology: Move skl-tplg-interface.h to uapi")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/uapi/sound/skl-tplg-interface.h | 106 ++++++++++++++++----------------
1 file changed, 54 insertions(+), 52 deletions(-)
--- a/include/uapi/sound/skl-tplg-interface.h
+++ b/include/uapi/sound/skl-tplg-interface.h
@@ -10,6 +10,8 @@
#ifndef __HDA_TPLG_INTERFACE_H__
#define __HDA_TPLG_INTERFACE_H__
+#include <linux/types.h>
+
/*
* Default types range from 0~12. type can range from 0 to 0xff
* SST types start at higher to avoid any overlapping in future
@@ -143,10 +145,10 @@ enum skl_module_param_type {
};
struct skl_dfw_algo_data {
- u32 set_params:2;
- u32 rsvd:30;
- u32 param_id;
- u32 max;
+ __u32 set_params:2;
+ __u32 rsvd:30;
+ __u32 param_id;
+ __u32 max;
char params[0];
} __packed;
@@ -163,68 +165,68 @@ enum skl_tuple_type {
/* v4 configuration data */
struct skl_dfw_v4_module_pin {
- u16 module_id;
- u16 instance_id;
+ __u16 module_id;
+ __u16 instance_id;
} __packed;
struct skl_dfw_v4_module_fmt {
- u32 channels;
- u32 freq;
- u32 bit_depth;
- u32 valid_bit_depth;
- u32 ch_cfg;
- u32 interleaving_style;
- u32 sample_type;
- u32 ch_map;
+ __u32 channels;
+ __u32 freq;
+ __u32 bit_depth;
+ __u32 valid_bit_depth;
+ __u32 ch_cfg;
+ __u32 interleaving_style;
+ __u32 sample_type;
+ __u32 ch_map;
} __packed;
struct skl_dfw_v4_module_caps {
- u32 set_params:2;
- u32 rsvd:30;
- u32 param_id;
- u32 caps_size;
- u32 caps[HDA_SST_CFG_MAX];
+ __u32 set_params:2;
+ __u32 rsvd:30;
+ __u32 param_id;
+ __u32 caps_size;
+ __u32 caps[HDA_SST_CFG_MAX];
} __packed;
struct skl_dfw_v4_pipe {
- u8 pipe_id;
- u8 pipe_priority;
- u16 conn_type:4;
- u16 rsvd:4;
- u16 memory_pages:8;
+ __u8 pipe_id;
+ __u8 pipe_priority;
+ __u16 conn_type:4;
+ __u16 rsvd:4;
+ __u16 memory_pages:8;
} __packed;
struct skl_dfw_v4_module {
char uuid[SKL_UUID_STR_SZ];
- u16 module_id;
- u16 instance_id;
- u32 max_mcps;
- u32 mem_pages;
- u32 obs;
- u32 ibs;
- u32 vbus_id;
-
- u32 max_in_queue:8;
- u32 max_out_queue:8;
- u32 time_slot:8;
- u32 core_id:4;
- u32 rsvd1:4;
-
- u32 module_type:8;
- u32 conn_type:4;
- u32 dev_type:4;
- u32 hw_conn_type:4;
- u32 rsvd2:12;
-
- u32 params_fixup:8;
- u32 converter:8;
- u32 input_pin_type:1;
- u32 output_pin_type:1;
- u32 is_dynamic_in_pin:1;
- u32 is_dynamic_out_pin:1;
- u32 is_loadable:1;
- u32 rsvd3:11;
+ __u16 module_id;
+ __u16 instance_id;
+ __u32 max_mcps;
+ __u32 mem_pages;
+ __u32 obs;
+ __u32 ibs;
+ __u32 vbus_id;
+
+ __u32 max_in_queue:8;
+ __u32 max_out_queue:8;
+ __u32 time_slot:8;
+ __u32 core_id:4;
+ __u32 rsvd1:4;
+
+ __u32 module_type:8;
+ __u32 conn_type:4;
+ __u32 dev_type:4;
+ __u32 hw_conn_type:4;
+ __u32 rsvd2:12;
+
+ __u32 params_fixup:8;
+ __u32 converter:8;
+ __u32 input_pin_type:1;
+ __u32 output_pin_type:1;
+ __u32 is_dynamic_in_pin:1;
+ __u32 is_dynamic_out_pin:1;
+ __u32 is_loadable:1;
+ __u32 rsvd3:11;
struct skl_dfw_v4_pipe pipe;
struct skl_dfw_v4_module_fmt in_fmt[MAX_IN_QUEUE];
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 30/88] ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 29/88] ASoC: uapi: fix sound/skl-tplg-interface.h userspace compilation errors Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 31/88] ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping Greg Kroah-Hartman
` (61 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit b1fbebd4164b3d170ad916dcd692cf843c9c065d upstream.
After allocating model-dependent data for M-Audio FW1814 and ProjectMix
I/O, ALSA bebob driver has memory leak at error path.
This commit releases the allocated data at the error path.
Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/bebob/bebob.c | 2 ++
sound/firewire/bebob/bebob_maudio.c | 4 ----
2 files changed, 2 insertions(+), 4 deletions(-)
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -263,6 +263,8 @@ do_registration(struct work_struct *work
error:
mutex_unlock(&devices_mutex);
snd_bebob_stream_destroy_duplex(bebob);
+ kfree(bebob->maudio_special_quirk);
+ bebob->maudio_special_quirk = NULL;
snd_card_free(bebob->card);
dev_info(&bebob->unit->device,
"Sound card registration failed: %d\n", err);
--- a/sound/firewire/bebob/bebob_maudio.c
+++ b/sound/firewire/bebob/bebob_maudio.c
@@ -290,10 +290,6 @@ snd_bebob_maudio_special_discover(struct
bebob->midi_output_ports = 2;
}
end:
- if (err < 0) {
- kfree(params);
- bebob->maudio_special_quirk = NULL;
- }
mutex_unlock(&bebob->mutex);
return err;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 31/88] ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 30/88] ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 32/88] ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO Greg Kroah-Hartman
` (60 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit 493626f2d87a74e6dbea1686499ed6e7e600484e upstream.
When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST',
an address of 'payload' argument is used for streaming DMA mapping by
'firewire_ohci' module if 'size' argument is larger than 8 byte.
Although in this case the address should not be on kernel stack, current
implementation of ALSA bebob driver uses data in kernel stack for a cue
to boot M-Audio devices. This often brings unexpected result, especially
for a case of CONFIG_VMAP_STACK=y.
This commit fixes the bug.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021
Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165
Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series')
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/bebob/bebob_maudio.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- a/sound/firewire/bebob/bebob_maudio.c
+++ b/sound/firewire/bebob/bebob_maudio.c
@@ -96,17 +96,13 @@ int snd_bebob_maudio_load_firmware(struc
struct fw_device *device = fw_parent_device(unit);
int err, rcode;
u64 date;
- __le32 cues[3] = {
- cpu_to_le32(MAUDIO_BOOTLOADER_CUE1),
- cpu_to_le32(MAUDIO_BOOTLOADER_CUE2),
- cpu_to_le32(MAUDIO_BOOTLOADER_CUE3)
- };
+ __le32 *cues;
/* check date of software used to build */
err = snd_bebob_read_block(unit, INFO_OFFSET_SW_DATE,
&date, sizeof(u64));
if (err < 0)
- goto end;
+ return err;
/*
* firmware version 5058 or later has date later than "20070401", but
* 'date' is not null-terminated.
@@ -114,20 +110,28 @@ int snd_bebob_maudio_load_firmware(struc
if (date < 0x3230303730343031LL) {
dev_err(&unit->device,
"Use firmware version 5058 or later\n");
- err = -ENOSYS;
- goto end;
+ return -ENXIO;
}
+ cues = kmalloc_array(3, sizeof(*cues), GFP_KERNEL);
+ if (!cues)
+ return -ENOMEM;
+
+ cues[0] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE1);
+ cues[1] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE2);
+ cues[2] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE3);
+
rcode = fw_run_transaction(device->card, TCODE_WRITE_BLOCK_REQUEST,
device->node_id, device->generation,
device->max_speed, BEBOB_ADDR_REG_REQ,
- cues, sizeof(cues));
+ cues, 3 * sizeof(*cues));
+ kfree(cues);
if (rcode != RCODE_COMPLETE) {
dev_err(&unit->device,
"Failed to send a cue to load firmware\n");
err = -EIO;
}
-end:
+
return err;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 32/88] ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 31/88] ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 33/88] ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() Greg Kroah-Hartman
` (59 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Willy Tarreau, Jann Horn, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Willy Tarreau <w@1wt.eu>
commit 49434c6c575d2008c0abbc93e615019f39e01252 upstream.
snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates
memory using kmalloc() and partially fills it by calling
snd_emu10k1_fx8010_info() before returning the resulting
structure to userspace, leaving uninitialized holes. Let's
just use kzalloc() here.
BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/emu10k1/emufx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -2540,7 +2540,7 @@ static int snd_emu10k1_fx8010_ioctl(stru
emu->support_tlv = 1;
return put_user(SNDRV_EMU10K1_VERSION, (int __user *)argp);
case SNDRV_EMU10K1_IOCTL_INFO:
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
snd_emu10k1_fx8010_info(emu, info);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 33/88] ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 32/88] ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 34/88] ALSA: firewire-digi00x: fix memory leak of private data Greg Kroah-Hartman
` (58 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit 36f3a6e02c143a7e9e4e143e416371f67bc1fae6 upstream.
An allocated memory forgets to be released.
Fixes: 76fdb3a9e13 ('ALSA: fireface: add support for Fireface 400')
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/fireface/ff-protocol-ff400.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/sound/firewire/fireface/ff-protocol-ff400.c
+++ b/sound/firewire/fireface/ff-protocol-ff400.c
@@ -146,6 +146,7 @@ static int ff400_switch_fetching_mode(st
{
__le32 *reg;
int i;
+ int err;
reg = kcalloc(18, sizeof(__le32), GFP_KERNEL);
if (reg == NULL)
@@ -163,9 +164,11 @@ static int ff400_switch_fetching_mode(st
reg[i] = cpu_to_le32(0x00000001);
}
- return snd_fw_transaction(ff->unit, TCODE_WRITE_BLOCK_REQUEST,
- FF400_FETCH_PCM_FRAMES, reg,
- sizeof(__le32) * 18, 0);
+ err = snd_fw_transaction(ff->unit, TCODE_WRITE_BLOCK_REQUEST,
+ FF400_FETCH_PCM_FRAMES, reg,
+ sizeof(__le32) * 18, 0);
+ kfree(reg);
+ return err;
}
static void ff400_dump_sync_status(struct snd_ff *ff,
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 34/88] ALSA: firewire-digi00x: fix memory leak of private data
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (32 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 33/88] ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 35/88] ALSA: firewire-tascam: " Greg Kroah-Hartman
` (57 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit a49a83ab05e34edd6c71a4fbd062c9a7ba6d18aa upstream.
Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.
This commit fixes memory leak following to the above design.
Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/digi00x/digi00x.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/firewire/digi00x/digi00x.c
+++ b/sound/firewire/digi00x/digi00x.c
@@ -49,6 +49,7 @@ static void dg00x_free(struct snd_dg00x
fw_unit_put(dg00x->unit);
mutex_destroy(&dg00x->mutex);
+ kfree(dg00x);
}
static void dg00x_card_free(struct snd_card *card)
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 35/88] ALSA: firewire-tascam: fix memory leak of private data
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 34/88] ALSA: firewire-digi00x: fix memory leak of private data Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 36/88] ALSA: fireworks: fix memory leak of response buffer at error path Greg Kroah-Hartman
` (56 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit 8d28277c065a974873c6781d44b7bcdcd8fb4e8a upstream.
Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.
This commit fixes memory leak following to the above design.
Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/tascam/tascam.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/firewire/tascam/tascam.c
+++ b/sound/firewire/tascam/tascam.c
@@ -93,6 +93,7 @@ static void tscm_free(struct snd_tscm *t
fw_unit_put(tscm->unit);
mutex_destroy(&tscm->mutex);
+ kfree(tscm);
}
static void tscm_card_free(struct snd_card *card)
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 36/88] ALSA: fireworks: fix memory leak of response buffer at error path
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 35/88] ALSA: firewire-tascam: " Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 37/88] ALSA: oxfw: fix memory leak for model-dependent data " Greg Kroah-Hartman
` (55 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit c3b55e2ec9c76e7a0de2a0b1dc851fdc9440385b upstream.
After allocating memory object for response buffer, ALSA fireworks
driver has leak of the memory object at error path.
This commit releases the object at the error path.
Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/fireworks/fireworks.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/firewire/fireworks/fireworks.c
+++ b/sound/firewire/fireworks/fireworks.c
@@ -301,6 +301,8 @@ error:
snd_efw_transaction_remove_instance(efw);
snd_efw_stream_destroy_duplex(efw);
snd_card_free(efw->card);
+ kfree(efw->resp_buf);
+ efw->resp_buf = NULL;
dev_info(&efw->unit->device,
"Sound card registration failed: %d\n", err);
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 37/88] ALSA: oxfw: fix memory leak for model-dependent data at error path
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 36/88] ALSA: fireworks: fix memory leak of response buffer at error path Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 38/88] ALSA: oxfw: fix memory leak of discovered stream formats " Greg Kroah-Hartman
` (54 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit ce925f088b979537f22f9e05eb923ef9822ca139 upstream.
After allocating model-dependent data, ALSA OXFW driver has memory leak
of the data at error path.
This commit releases the data at the error path.
Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/oxfw/oxfw.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -270,6 +270,8 @@ error:
if (oxfw->has_output)
snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream);
snd_card_free(oxfw->card);
+ kfree(oxfw->spec);
+ oxfw->spec = NULL;
dev_info(&oxfw->unit->device,
"Sound card registration failed: %d\n", err);
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 38/88] ALSA: oxfw: fix memory leak of discovered stream formats at error path
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 37/88] ALSA: oxfw: fix memory leak for model-dependent data " Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 39/88] ALSA: oxfw: fix memory leak of private data Greg Kroah-Hartman
` (53 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit 1064bc685d359f549f91c2d5f111965a9284f328 upstream.
After finishing discover of stream formats, ALSA OXFW driver has memory
leak of allocated memory object at error path.
This commit releases the memory object at the error path.
Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/oxfw/oxfw.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -207,6 +207,7 @@ static int detect_quirks(struct snd_oxfw
static void do_registration(struct work_struct *work)
{
struct snd_oxfw *oxfw = container_of(work, struct snd_oxfw, dwork.work);
+ int i;
int err;
if (oxfw->registered)
@@ -269,6 +270,12 @@ error:
snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream);
if (oxfw->has_output)
snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream);
+ for (i = 0; i < SND_OXFW_STREAM_FORMAT_ENTRIES; ++i) {
+ kfree(oxfw->tx_stream_formats[i]);
+ oxfw->tx_stream_formats[i] = NULL;
+ kfree(oxfw->rx_stream_formats[i]);
+ oxfw->rx_stream_formats[i] = NULL;
+ }
snd_card_free(oxfw->card);
kfree(oxfw->spec);
oxfw->spec = NULL;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 39/88] ALSA: oxfw: fix memory leak of private data
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 38/88] ALSA: oxfw: fix memory leak of discovered stream formats " Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 40/88] mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able Greg Kroah-Hartman
` (52 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
commit 498fe23aad8e3b5a9554f55719c537603b4476ea upstream.
Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.
This commit fixes memory leak following to the above design.
Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/firewire/oxfw/oxfw.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -130,6 +130,7 @@ static void oxfw_free(struct snd_oxfw *o
kfree(oxfw->spec);
mutex_destroy(&oxfw->mutex);
+ kfree(oxfw);
}
/*
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 40/88] mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 39/88] ALSA: oxfw: fix memory leak of private data Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 41/88] mtd: rawnand: denali: fix a race condition when DMA is kicked Greg Kroah-Hartman
` (51 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jarkko Nikula, Boris Brezillon
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Brezillon <boris.brezillon@bootlin.com>
commit 4a3e85f2674cbfb81052059107d0165269778e2f upstream.
As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be
DMA-able, and commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx()
API") failed to follow this rule as buffers passed to
->{read,write}_reg() are usually placed on the stack.
Fix that by allocating a scratch buffer and copying the data around.
Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/devices/m25p80.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -41,13 +41,23 @@ static int m25p80_read_reg(struct spi_no
struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(len, val, 1));
+ SPI_MEM_OP_DATA_IN(len, NULL, 1));
+ void *scratchbuf;
int ret;
+ scratchbuf = kmalloc(len, GFP_KERNEL);
+ if (!scratchbuf)
+ return -ENOMEM;
+
+ op.data.buf.in = scratchbuf;
ret = spi_mem_exec_op(flash->spimem, &op);
if (ret < 0)
dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret,
code);
+ else
+ memcpy(val, scratchbuf, len);
+
+ kfree(scratchbuf);
return ret;
}
@@ -58,9 +68,19 @@ static int m25p80_write_reg(struct spi_n
struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(len, buf, 1));
+ SPI_MEM_OP_DATA_OUT(len, NULL, 1));
+ void *scratchbuf;
+ int ret;
+
+ scratchbuf = kmemdup(buf, len, GFP_KERNEL);
+ if (!scratchbuf)
+ return -ENOMEM;
- return spi_mem_exec_op(flash->spimem, &op);
+ op.data.buf.out = scratchbuf;
+ ret = spi_mem_exec_op(flash->spimem, &op);
+ kfree(scratchbuf);
+
+ return ret;
}
static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 41/88] mtd: rawnand: denali: fix a race condition when DMA is kicked
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 40/88] mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 42/88] platform/x86: dell-smbios-wmi: Correct a memory leak Greg Kroah-Hartman
` (50 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Steffen Trumtrar, Masahiro Yamada,
Miquel Raynal, Boris Brezillon
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada <yamada.masahiro@socionext.com>
commit cf51e4b9c34407bf0c3d9b582b7837e047e1df47 upstream.
I thought the read-back of the DMA_ENABLE register was unnecessary
(at least it is working on my boards), then deleted it in commit
586a2c52909d ("mtd: nand: denali: squash denali_enable_dma() helper
into caller"). Sorry, I was wrong - it caused a timing issue on
Cyclone5 SoCFPGAs.
Revive the register read-back, commenting why this is necessary.
Fixes: 586a2c52909d ("mtd: nand: denali: squash denali_enable_dma() helper into caller")
Cc: <stable@vger.kernel.org>
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/raw/denali.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -604,6 +604,12 @@ static int denali_dma_xfer(struct denali
}
iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE);
+ /*
+ * The ->setup_dma() hook kicks DMA by using the data/command
+ * interface, which belongs to a different AXI port from the
+ * register interface. Read back the register to avoid a race.
+ */
+ ioread32(denali->reg + DMA_ENABLE);
denali_reset_irq(denali);
denali->setup_dma(denali, dma_addr, page, write);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 42/88] platform/x86: dell-smbios-wmi: Correct a memory leak
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 41/88] mtd: rawnand: denali: fix a race condition when DMA is kicked Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 43/88] platform/x86: alienware-wmi: " Greg Kroah-Hartman
` (49 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pinzhen Xu, Mario Limonciello,
Darren Hart (VMware)
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <mario.limonciello@dell.com>
commit affab51082174f60ef71ced8ab5fbe71f00e9ae3 upstream.
ACPI buffers were being allocated but never freed.
Reported-by: Pinzhen Xu <pinzhen.xu@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/platform/x86/dell-smbios-wmi.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/platform/x86/dell-smbios-wmi.c
+++ b/drivers/platform/x86/dell-smbios-wmi.c
@@ -78,6 +78,7 @@ static int run_smbios_call(struct wmi_de
dev_dbg(&wdev->dev, "result: [%08x,%08x,%08x,%08x]\n",
priv->buf->std.output[0], priv->buf->std.output[1],
priv->buf->std.output[2], priv->buf->std.output[3]);
+ kfree(output.pointer);
return 0;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 43/88] platform/x86: alienware-wmi: Correct a memory leak
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 42/88] platform/x86: dell-smbios-wmi: Correct a memory leak Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 44/88] xen/netfront: dont bug in case of too many frags Greg Kroah-Hartman
` (48 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mario Limonciello, Darren Hart (VMware)
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <mario.limonciello@dell.com>
commit ff0e9f26288d2daee4950f42b37a3d3d30d36ec1 upstream.
An ACPI buffer that was allocated was not being freed after use.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/platform/x86/alienware-wmi.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/platform/x86/alienware-wmi.c
+++ b/drivers/platform/x86/alienware-wmi.c
@@ -536,6 +536,7 @@ static acpi_status alienware_wmax_comman
if (obj && obj->type == ACPI_TYPE_INTEGER)
*out_data = (u32) obj->integer.value;
}
+ kfree(output.pointer);
return status;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 44/88] xen/netfront: dont bug in case of too many frags
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (42 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 43/88] platform/x86: alienware-wmi: " Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 45/88] xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code Greg Kroah-Hartman
` (47 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Juergen Gross, David S. Miller
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <jgross@suse.com>
commit ad4f15dc2c70b1de5e0a64d27335962fbc9cf71c upstream.
Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in
xennet_get_responses()") raised the max number of allowed slots by one.
This seems to be problematic in some configurations with netback using
a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS
defined as 18 instead of nowadays 17).
Instead of BUG_ON() in this case just fall back to retransmission.
Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -907,7 +907,11 @@ static RING_IDX xennet_fill_frags(struct
BUG_ON(pull_to <= skb_headlen(skb));
__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
}
- BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS);
+ if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
+ queue->rx.rsp_cons = ++cons;
+ kfree_skb(nskb);
+ return ~0U;
+ }
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
skb_frag_page(nfrag),
@@ -1044,6 +1048,8 @@ err:
skb->len += rx->status;
i = xennet_fill_frags(queue, skb, &tmpq);
+ if (unlikely(i == ~0U))
+ goto err;
if (rx->flags & XEN_NETRXF_csum_blank)
skb->ip_summed = CHECKSUM_PARTIAL;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 45/88] xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (43 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 44/88] xen/netfront: dont bug in case of too many frags Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 46/88] spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers Greg Kroah-Hartman
` (46 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Rutland, Juergen Gross, Boris Ostrovsky
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
commit 70513d58751d7c6c1a0133557b13089b9f2e3e66 upstream.
Otherwise we may leak kernel stack for events that sample user
registers.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/pmu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/xen/pmu.c
+++ b/arch/x86/xen/pmu.c
@@ -478,7 +478,7 @@ static void xen_convert_regs(const struc
irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id)
{
int err, ret = IRQ_NONE;
- struct pt_regs regs;
+ struct pt_regs regs = {0};
const struct xen_pmu_data *xenpmu_data = get_xenpmu_data();
uint8_t xenpmu_flags = get_xenpmu_flags();
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 46/88] spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 45/88] xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 47/88] Revert "PCI: Add ACS quirk for Intel 300 series" Greg Kroah-Hartman
` (45 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kirill Kapranov, Mark Brown
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill Kapranov <kirill.kapranov@compulab.co.il>
commit 1a4327fbf4554d5b78d75b19a13d40d6de220159 upstream.
On systems where some controllers get a dynamic ID assigned and some have
a fixed number (e.g. from ACPI tables), the current implementation might
run into an IDR collision: in case of a fixed bus number is gotten by a
driver (but not marked busy in IDR tree) and a driver with dynamic bus
number gets the same ID and predictably fails.
Fix this by means of checking-in fixed IDsin IDR as far as dynamic ones
at the moment of the controller registration.
Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias)
Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/spi/spi.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2170,6 +2170,15 @@ int spi_register_controller(struct spi_c
if (WARN(id < 0, "couldn't get idr"))
return id;
ctlr->bus_num = id;
+ } else {
+ /* devices with a fixed bus num must check-in with the num */
+ mutex_lock(&board_lock);
+ id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
+ ctlr->bus_num + 1, GFP_KERNEL);
+ mutex_unlock(&board_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id == -ENOSPC ? -EBUSY : id;
+ ctlr->bus_num = id;
}
INIT_LIST_HEAD(&ctlr->queue);
spin_lock_init(&ctlr->queue_lock);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 47/88] Revert "PCI: Add ACS quirk for Intel 300 series"
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 46/88] spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 48/88] ring-buffer: Allow for rescheduling when removing pages Greg Kroah-Hartman
` (44 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mika Westerberg, Bjorn Helgaas
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg <mika.westerberg@linux.intel.com>
commit 50ca031b51106b1b46162d4e9ecccb7edc95682f upstream.
This reverts f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series").
It turns out that erratum "PCH PCIe* Controller Root Port (ACSCTLR) Appear
As Read Only" has been fixed in 300 series chipsets, even though the
datasheet [1] claims otherwise. To make ACS work properly on 300 series
root ports, revert the faulty commit.
[1] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/300-series-c240-series-chipset-pch-spec-update.pdf
Fixes: f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/quirks.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4235,11 +4235,6 @@ static int pci_quirk_qcom_rp_acs(struct
*
* 0x9d10-0x9d1b PCI Express Root port #{1-12}
*
- * The 300 series chipset suffers from the same bug so include those root
- * ports here as well.
- *
- * 0xa32c-0xa343 PCI Express Root port #{0-24}
- *
* [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html
* [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html
* [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html
@@ -4257,7 +4252,6 @@ static bool pci_quirk_intel_spt_pch_acs_
case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */
case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */
case 0x9d10 ... 0x9d1b: /* 7th & 8th Gen Mobile */
- case 0xa32c ... 0xa343: /* 300 series */
return true;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 48/88] ring-buffer: Allow for rescheduling when removing pages
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 47/88] Revert "PCI: Add ACS quirk for Intel 300 series" Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 49/88] crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2 Greg Kroah-Hartman
` (43 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Behmer, Vaibhav Nagarnaik,
Steven Rostedt (VMware)
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vaibhav Nagarnaik <vnagarnaik@google.com>
commit 83f365554e47997ec68dc4eca3f5dce525cd15c3 upstream.
When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.
After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.
Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com
Cc: stable@vger.kernel.org
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Jason Behmer <jbehmer@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ring_buffer.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1545,6 +1545,8 @@ rb_remove_pages(struct ring_buffer_per_c
tmp_iter_page = first_page;
do {
+ cond_resched();
+
to_remove_page = tmp_iter_page;
rb_inc_page(cpu_buffer, &tmp_iter_page);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 49/88] crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 48/88] ring-buffer: Allow for rescheduling when removing pages Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 50/88] fork: report pid exhaustion correctly Greg Kroah-Hartman
` (42 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zdenek Kaspar, Ondrej Mosnacek, Herbert Xu
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ondrej Mosnacek <omosnace@redhat.com>
commit 24568b47d48ec8c906fd0f589489a08b17e1edca upstream.
It turns out OSXSAVE needs to be checked only for AVX, not for SSE.
Without this patch the affected modules refuse to load on CPUs with SSE2
but without AVX support.
Fixes: 877ccce7cbe8 ("crypto: x86/aegis,morus - Fix and simplify CPUID checks")
Cc: <stable@vger.kernel.org> # 4.18
Reported-by: Zdenek Kaspar <zkaspar82@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/crypto/aegis128-aesni-glue.c | 1 -
arch/x86/crypto/aegis128l-aesni-glue.c | 1 -
arch/x86/crypto/aegis256-aesni-glue.c | 1 -
arch/x86/crypto/morus1280-sse2-glue.c | 1 -
arch/x86/crypto/morus640-sse2-glue.c | 1 -
5 files changed, 5 deletions(-)
--- a/arch/x86/crypto/aegis128-aesni-glue.c
+++ b/arch/x86/crypto/aegis128-aesni-glue.c
@@ -379,7 +379,6 @@ static int __init crypto_aegis128_aesni_
{
if (!boot_cpu_has(X86_FEATURE_XMM2) ||
!boot_cpu_has(X86_FEATURE_AES) ||
- !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
!cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
return -ENODEV;
--- a/arch/x86/crypto/aegis128l-aesni-glue.c
+++ b/arch/x86/crypto/aegis128l-aesni-glue.c
@@ -379,7 +379,6 @@ static int __init crypto_aegis128l_aesni
{
if (!boot_cpu_has(X86_FEATURE_XMM2) ||
!boot_cpu_has(X86_FEATURE_AES) ||
- !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
!cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
return -ENODEV;
--- a/arch/x86/crypto/aegis256-aesni-glue.c
+++ b/arch/x86/crypto/aegis256-aesni-glue.c
@@ -379,7 +379,6 @@ static int __init crypto_aegis256_aesni_
{
if (!boot_cpu_has(X86_FEATURE_XMM2) ||
!boot_cpu_has(X86_FEATURE_AES) ||
- !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
!cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
return -ENODEV;
--- a/arch/x86/crypto/morus1280-sse2-glue.c
+++ b/arch/x86/crypto/morus1280-sse2-glue.c
@@ -40,7 +40,6 @@ MORUS1280_DECLARE_ALGS(sse2, "morus1280-
static int __init crypto_morus1280_sse2_module_init(void)
{
if (!boot_cpu_has(X86_FEATURE_XMM2) ||
- !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
!cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
return -ENODEV;
--- a/arch/x86/crypto/morus640-sse2-glue.c
+++ b/arch/x86/crypto/morus640-sse2-glue.c
@@ -40,7 +40,6 @@ MORUS640_DECLARE_ALGS(sse2, "morus640-ss
static int __init crypto_morus640_sse2_module_init(void)
{
if (!boot_cpu_has(X86_FEATURE_XMM2) ||
- !boot_cpu_has(X86_FEATURE_OSXSAVE) ||
!cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL))
return -ENODEV;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 50/88] fork: report pid exhaustion correctly
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 49/88] crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2 Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 51/88] mm: disable deferred struct page for 32-bit arches Greg Kroah-Hartman
` (41 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, KJ Tsanaktsidis, Andrew Morton,
Michal Hocko, Gargi Sharma, Rik van Riel, Oleg Nesterov
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
commit f83606f5eb007adc33bc8541ede00590f477bdeb upstream.
Make the clone and fork syscalls return EAGAIN when the limit on the
number of pids /proc/sys/kernel/pid_max is exceeded.
Currently, when the pid_max limit is exceeded, the kernel will return
ENOSPC from the fork and clone syscalls. This is contrary to the
documented behaviour, which explicitly calls out the pid_max case as one
where EAGAIN should be returned. It also leads to really confusing error
messages in userspace programs which will complain about a lack of disk
space when they fail to create processes/threads for this reason.
This error is being returned because alloc_pid() uses the idr api to find
a new pid; when there are none available, idr_alloc_cyclic() returns
-ENOSPC, and this is being propagated back to userspace.
This behaviour has been broken before, and was explicitly fixed in
commit 35f71bc0a09a ("fork: report pid reservation failure properly"),
so I think -EAGAIN is definitely the right thing to return in this case.
The current behaviour change dates from commit 95846ecf9dac ("pid:
replace pid bitmap implementation with IDR AIP") and was I believe
unintentional.
This patch has no impact on the case where allocating a pid fails because
the child reaper for the namespace is dead; that case will still return
-ENOMEM.
Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com
Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP")
Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/pid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -195,7 +195,7 @@ struct pid *alloc_pid(struct pid_namespa
idr_preload_end();
if (nr < 0) {
- retval = nr;
+ retval = (nr == -ENOSPC) ? -EAGAIN : nr;
goto out_free;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 51/88] mm: disable deferred struct page for 32-bit arches
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 50/88] fork: report pid exhaustion correctly Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 52/88] mm: shmem.c: Correctly annotate new inodes for lockdep Greg Kroah-Hartman
` (40 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Tatashin, Jiri Slaby,
Michal Hocko, Andrew Morton
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
commit 889c695d419f19e5db52592dafbaf26143c36d1f upstream.
Deferred struct page init is needed only on systems with large amount of
physical memory to improve boot performance. 32-bit systems do not
benefit from this feature.
Jiri reported a problem where deferred struct pages do not work well with
x86-32:
[ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.036269] Initializing CPU#0
[ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0)
[ 0.038459] page:f6780000 is uninitialized and poisoned
[ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
[ 0.040038] ------------[ cut here ]------------
[ 0.040399] kernel BUG at include/linux/page-flags.h:293!
[ 0.040823] invalid opcode: 0000 [#1] SMP PTI
[ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9
[ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[ 0.042496] EIP: free_highmem_page+0x64/0x80
[ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71
[ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8
[ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc
[ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086
[ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690
[ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 0.046913] DR6: fffe0ff0 DR7: 00000400
[ 0.047220] Call Trace:
[ 0.047419] add_highpages_with_active_regions+0xbd/0x10d
[ 0.047854] set_highmem_pages_init+0x5b/0x71
[ 0.048202] mem_init+0x2b/0x1e8
[ 0.048460] start_kernel+0x1d2/0x425
[ 0.048757] i386_start_kernel+0x93/0x97
[ 0.049073] startup_32_smp+0x164/0x168
[ 0.049379] Modules linked in:
[ 0.049626] ---[ end trace 337949378db0abbb ]---
We free highmem pages before their struct pages are initialized:
mem_init()
set_highmem_pages_init()
add_highpages_with_active_regions()
free_highmem_page()
.. Access uninitialized struct page here..
Because there is no reason to have this feature on 32-bit systems, just
disable it.
Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com
Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements")
Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -637,6 +637,7 @@ config DEFERRED_STRUCT_PAGE_INIT
depends on NO_BOOTMEM
depends on SPARSEMEM
depends on !NEED_PER_CPU_KM
+ depends on 64BIT
help
Ordinarily all struct pages are initialised during early boot in a
single thread. On very large machines this can take a considerable
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 52/88] mm: shmem.c: Correctly annotate new inodes for lockdep
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 51/88] mm: disable deferred struct page for 32-bit arches Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 53/88] Revert "rpmsg: core: add support to power domains for devices" Greg Kroah-Hartman
` (39 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joel Fernandes (Google),
syzbot, NeilBrown, Matthew Wilcox, Peter Zijlstra, Hugh Dickins,
Andrew Morton
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joel Fernandes (Google) <joel@joelfernandes.org>
commit b45d71fb89ab8adfe727b9d0ee188ed58582a647 upstream.
Directories and inodes don't necessarily need to be in the same lockdep
class. For ex, hugetlbfs splits them out too to prevent false positives
in lockdep. Annotate correctly after new inode creation. If its a
directory inode, it will be put into a different class.
This should fix a lockdep splat reported by syzbot:
> ======================================================
> WARNING: possible circular locking dependency detected
> 4.18.0-rc8-next-20180810+ #36 Not tainted
> ------------------------------------------------------
> syz-executor900/4483 is trying to acquire lock:
> 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock
> include/linux/fs.h:765 [inline]
> 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at:
> shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>
> but task is already holding lock:
> 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630
> drivers/staging/android/ashmem.c:448
>
> which lock already depends on the new lock.
>
> -> #2 (ashmem_mutex){+.+.}:
> __mutex_lock_common kernel/locking/mutex.c:925 [inline]
> __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
> mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
> ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361
> call_mmap include/linux/fs.h:1844 [inline]
> mmap_region+0xf27/0x1c50 mm/mmap.c:1762
> do_mmap+0xa10/0x1220 mm/mmap.c:1535
> do_mmap_pgoff include/linux/mm.h:2298 [inline]
> vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357
> ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585
> __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
> __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline]
> __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91
> do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #1 (&mm->mmap_sem){++++}:
> __might_fault+0x155/0x1e0 mm/memory.c:4568
> _copy_to_user+0x30/0x110 lib/usercopy.c:25
> copy_to_user include/linux/uaccess.h:155 [inline]
> filldir+0x1ea/0x3a0 fs/readdir.c:196
> dir_emit_dot include/linux/fs.h:3464 [inline]
> dir_emit_dots include/linux/fs.h:3475 [inline]
> dcache_readdir+0x13a/0x620 fs/libfs.c:193
> iterate_dir+0x48b/0x5d0 fs/readdir.c:51
> __do_sys_getdents fs/readdir.c:231 [inline]
> __se_sys_getdents fs/readdir.c:212 [inline]
> __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212
> do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #0 (&sb->s_type->i_mutex_key#9){++++}:
> lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
> down_write+0x8f/0x130 kernel/locking/rwsem.c:70
> inode_lock include/linux/fs.h:765 [inline]
> shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
> ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455
> ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797
> vfs_ioctl fs/ioctl.c:46 [inline]
> file_ioctl fs/ioctl.c:501 [inline]
> do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685
> ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702
> __do_sys_ioctl fs/ioctl.c:709 [inline]
> __se_sys_ioctl fs/ioctl.c:707 [inline]
> __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707
> do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> other info that might help us debug this:
>
> Chain exists of:
> &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex
>
> Possible unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(ashmem_mutex);
> lock(&mm->mmap_sem);
> lock(ashmem_mutex);
> lock(&sb->s_type->i_mutex_key#9);
>
> *** DEADLOCK ***
>
> 1 lock held by syz-executor900/4483:
> #0: 0000000025208078 (ashmem_mutex){+.+.}, at:
> ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448
Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Suggested-by: NeilBrown <neilb@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/shmem.c | 2 ++
1 file changed, 2 insertions(+)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2226,6 +2226,8 @@ static struct inode *shmem_get_inode(str
mpol_shared_policy_init(&info->policy, NULL);
break;
}
+
+ lockdep_annotate_inode_mutex_key(inode);
} else
shmem_free_inode(sb);
return inode;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 53/88] Revert "rpmsg: core: add support to power domains for devices"
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 52/88] mm: shmem.c: Correctly annotate new inodes for lockdep Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 54/88] bpf/verifier: disallow pointer subtraction Greg Kroah-Hartman
` (38 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafael Tinoco, Srinivas Kandagatla,
Bjorn Andersson, Sasha Levin
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit e5d9ae0077a5cf336d298002959dc0c8dcfe7b89 which is
commit fe782affd0f440a4e60e2cc81b8f2eccb2923113 upstream
Rafael reports that this patch causes problems:
> -rc2 looks good. There is a problem on dragonboard during boot that was
> introduced in v4.14.71 that I didn't notice last week. We'll bisect it
> and report back later this week. dragonboard on the other branches (4.9,
> 4.18, mainline) looks fine.
As Dan pointed out, during validation, we have bisected this issue on
a dragonboard 410c (can't find root device) to the following commit
for v4.14:
[1ed3a9307230] rpmsg: core: add support to power domains for devices
There is an on-going discussion on "[PATCH] rpmsg: core: add support
to power domains for devices" about this patch having other
dependencies and breaking something else on v4.14 as well.
so drop it.
Reported-by: Rafael Tinoco <rafael.tinoco@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/rpmsg/rpmsg_core.c | 7 -------
1 file changed, 7 deletions(-)
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/rpmsg.h>
#include <linux/of_device.h>
-#include <linux/pm_domain.h>
#include <linux/slab.h>
#include "rpmsg_internal.h"
@@ -450,10 +449,6 @@ static int rpmsg_dev_probe(struct device
struct rpmsg_endpoint *ept = NULL;
int err;
- err = dev_pm_domain_attach(dev, true);
- if (err)
- goto out;
-
if (rpdrv->callback) {
strncpy(chinfo.name, rpdev->id.name, RPMSG_NAME_SIZE);
chinfo.src = rpdev->src;
@@ -495,8 +490,6 @@ static int rpmsg_dev_remove(struct devic
rpdrv->remove(rpdev);
- dev_pm_domain_detach(dev, true);
-
if (rpdev->ept)
rpmsg_destroy_ept(rpdev->ept);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 54/88] bpf/verifier: disallow pointer subtraction
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 53/88] Revert "rpmsg: core: add support to power domains for devices" Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 55/88] Revert "uapi/linux/keyctl.h: dont use C++ reserved keyword as a struct member name" Greg Kroah-Hartman
` (37 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jann Horn, Daniel Borkmann,
Alexei Starovoitov
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexei Starovoitov <ast@kernel.org>
commit dd066823db2ac4e22f721ec85190817b58059a54 upstream.
Subtraction of pointers was accidentally allowed for unpriv programs
by commit 82abbf8d2fc4. Revert that part of commit.
Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers")
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -3132,7 +3132,7 @@ static int adjust_reg_min_max_vals(struc
* an arbitrary scalar. Disallow all math except
* pointer subtraction
*/
- if (opcode == BPF_SUB){
+ if (opcode == BPF_SUB && env->allow_ptr_leaks) {
mark_reg_unknown(env, regs, insn->dst_reg);
return 0;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 55/88] Revert "uapi/linux/keyctl.h: dont use C++ reserved keyword as a struct member name"
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 54/88] bpf/verifier: disallow pointer subtraction Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 56/88] scsi: target: iscsi: Use hex2bin instead of a re-implementation Greg Kroah-Hartman
` (36 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lubomir Rintel, David Howells,
Randy Dunlap, Mat Martineau, Stephan Mueller, James Morris,
Serge E. Hallyn, Andrew Morton, Linus Torvalds, James Morris
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lubomir Rintel <lkundrak@v3.sk>
commit 8c0f9f5b309d627182d5da72a69246f58bde1026 upstream.
This changes UAPI, breaking iwd and libell:
ell/key.c: In function 'kernel_dh_compute':
ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'?
struct keyctl_dh_params params = { .private = private,
^~~~~~~
dh_private
This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8.
Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: James Morris <jmorris@namei.org>
cc: "Serge E. Hallyn" <serge@hallyn.com>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: <stable@vger.kernel.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/uapi/linux/keyctl.h | 2 +-
security/keys/dh.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/include/uapi/linux/keyctl.h
+++ b/include/uapi/linux/keyctl.h
@@ -65,7 +65,7 @@
/* keyctl structures */
struct keyctl_dh_params {
- __s32 dh_private;
+ __s32 private;
__s32 prime;
__s32 base;
};
--- a/security/keys/dh.c
+++ b/security/keys/dh.c
@@ -300,7 +300,7 @@ long __keyctl_dh_compute(struct keyctl_d
}
dh_inputs.g_size = dlen;
- dlen = dh_data_from_key(pcopy.dh_private, &dh_inputs.key);
+ dlen = dh_data_from_key(pcopy.private, &dh_inputs.key);
if (dlen < 0) {
ret = dlen;
goto out2;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 56/88] scsi: target: iscsi: Use hex2bin instead of a re-implementation
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 55/88] Revert "uapi/linux/keyctl.h: dont use C++ reserved keyword as a struct member name" Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 57/88] scsi: target: iscsi: Use bin2hex " Greg Kroah-Hartman
` (35 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vincent Pelletier, Mike Christie,
Martin K. Petersen
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vincent Pelletier <plr.vincent@gmail.com>
commit 1816494330a83f2a064499d8ed2797045641f92c upstream.
This change has the following effects, in order of descreasing importance:
1) Prevent a stack buffer overflow
2) Do not append an unnecessary NULL to an anyway binary buffer, which
is writing one byte past client_digest when caller is:
chap_string_to_hex(client_digest, chap_r, strlen(chap_r));
The latter was found by KASAN (see below) when input value hes expected size
(32 hex chars), and further analysis revealed a stack buffer overflow can
happen when network-received value is longer, allowing an unauthenticated
remote attacker to smash up to 17 bytes after destination buffer (16 bytes
attacker-controlled and one null). As switching to hex2bin requires
specifying destination buffer length, and does not internally append any null,
it solves both issues.
This addresses CVE-2018-14633.
Beyond this:
- Validate received value length and check hex2bin accepted the input, to log
this rejection reason instead of just failing authentication.
- Only log received CHAP_R and CHAP_C values once they passed sanity checks.
==================================================================
BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021
CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014
Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod]
Call Trace:
dump_stack+0x71/0xac
print_address_description+0x65/0x22e
? chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
kasan_report.cold.6+0x241/0x2fd
chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod]
? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod]
? ftrace_caller_op_ptr+0xe/0xe
? __orc_find+0x6f/0xc0
? unwind_next_frame+0x231/0x850
? kthread+0x1a0/0x1c0
? ret_from_fork+0x35/0x40
? ret_from_fork+0x35/0x40
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? deref_stack_reg+0xd0/0xd0
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? is_module_text_address+0xa/0x11
? kernel_text_address+0x4c/0x110
? __save_stack_trace+0x82/0x100
? ret_from_fork+0x35/0x40
? save_stack+0x8c/0xb0
? 0xffffffffc1660000
? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod]
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? process_one_work+0x35c/0x640
? worker_thread+0x66/0x5d0
? kthread+0x1a0/0x1c0
? ret_from_fork+0x35/0x40
? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod]
? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod]
chap_main_loop+0x172/0x570 [iscsi_target_mod]
? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod]
? rx_data+0xd6/0x120 [iscsi_target_mod]
? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod]
? cyc2ns_read_begin.part.2+0x90/0x90
? _raw_spin_lock_irqsave+0x25/0x50
? memcmp+0x45/0x70
iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod]
? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod]
? del_timer+0xe0/0xe0
? memset+0x1f/0x40
? flush_sigqueue+0x29/0xd0
iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod]
? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod]
process_one_work+0x35c/0x640
worker_thread+0x66/0x5d0
? flush_rcu_work+0x40/0x40
kthread+0x1a0/0x1c0
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40
The buggy address belongs to the page:
page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x17fffc000000000()
raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00
ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00
>ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00
^
ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2
ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00
==================================================================
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/iscsi/iscsi_target_auth.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -26,18 +26,6 @@
#include "iscsi_target_nego.h"
#include "iscsi_target_auth.h"
-static int chap_string_to_hex(unsigned char *dst, unsigned char *src, int len)
-{
- int j = DIV_ROUND_UP(len, 2), rc;
-
- rc = hex2bin(dst, src, j);
- if (rc < 0)
- pr_debug("CHAP string contains non hex digit symbols\n");
-
- dst[j] = '\0';
- return j;
-}
-
static void chap_binaryhex_to_asciihex(char *dst, char *src, int src_len)
{
int i;
@@ -248,9 +236,16 @@ static int chap_server_compute_md5(
pr_err("Could not find CHAP_R.\n");
goto out;
}
+ if (strlen(chap_r) != MD5_SIGNATURE_SIZE * 2) {
+ pr_err("Malformed CHAP_R\n");
+ goto out;
+ }
+ if (hex2bin(client_digest, chap_r, MD5_SIGNATURE_SIZE) < 0) {
+ pr_err("Malformed CHAP_R\n");
+ goto out;
+ }
pr_debug("[server] Got CHAP_R=%s\n", chap_r);
- chap_string_to_hex(client_digest, chap_r, strlen(chap_r));
tfm = crypto_alloc_shash("md5", 0, 0);
if (IS_ERR(tfm)) {
@@ -349,9 +344,7 @@ static int chap_server_compute_md5(
pr_err("Could not find CHAP_C.\n");
goto out;
}
- pr_debug("[server] Got CHAP_C=%s\n", challenge);
- challenge_len = chap_string_to_hex(challenge_binhex, challenge,
- strlen(challenge));
+ challenge_len = DIV_ROUND_UP(strlen(challenge), 2);
if (!challenge_len) {
pr_err("Unable to convert incoming challenge\n");
goto out;
@@ -360,6 +353,11 @@ static int chap_server_compute_md5(
pr_err("CHAP_C exceeds maximum binary size of 1024 bytes\n");
goto out;
}
+ if (hex2bin(challenge_binhex, challenge, challenge_len) < 0) {
+ pr_err("Malformed CHAP_C\n");
+ goto out;
+ }
+ pr_debug("[server] Got CHAP_C=%s\n", challenge);
/*
* During mutual authentication, the CHAP_C generated by the
* initiator must not match the original CHAP_C generated by
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 57/88] scsi: target: iscsi: Use bin2hex instead of a re-implementation
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 56/88] scsi: target: iscsi: Use hex2bin instead of a re-implementation Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 58/88] Revert "ubifs: xattr: Dont operate on deleted inodes" Greg Kroah-Hartman
` (34 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vincent Pelletier, Mike Christie,
Martin K. Petersen
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vincent Pelletier <plr.vincent@gmail.com>
commit 8c39e2699f8acb2e29782a834e56306da24937fe upstream.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/iscsi/iscsi_target_auth.c | 15 +++------------
1 file changed, 3 insertions(+), 12 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -26,15 +26,6 @@
#include "iscsi_target_nego.h"
#include "iscsi_target_auth.h"
-static void chap_binaryhex_to_asciihex(char *dst, char *src, int src_len)
-{
- int i;
-
- for (i = 0; i < src_len; i++) {
- sprintf(&dst[i*2], "%02x", (int) src[i] & 0xff);
- }
-}
-
static int chap_gen_challenge(
struct iscsi_conn *conn,
int caller,
@@ -50,7 +41,7 @@ static int chap_gen_challenge(
ret = get_random_bytes_wait(chap->challenge, CHAP_CHALLENGE_LENGTH);
if (unlikely(ret))
return ret;
- chap_binaryhex_to_asciihex(challenge_asciihex, chap->challenge,
+ bin2hex(challenge_asciihex, chap->challenge,
CHAP_CHALLENGE_LENGTH);
/*
* Set CHAP_C, and copy the generated challenge into c_str.
@@ -289,7 +280,7 @@ static int chap_server_compute_md5(
goto out;
}
- chap_binaryhex_to_asciihex(response, server_digest, MD5_SIGNATURE_SIZE);
+ bin2hex(response, server_digest, MD5_SIGNATURE_SIZE);
pr_debug("[server] MD5 Server Digest: %s\n", response);
if (memcmp(server_digest, client_digest, MD5_SIGNATURE_SIZE) != 0) {
@@ -411,7 +402,7 @@ static int chap_server_compute_md5(
/*
* Convert response from binary hex to ascii hext.
*/
- chap_binaryhex_to_asciihex(response, digest, MD5_SIGNATURE_SIZE);
+ bin2hex(response, digest, MD5_SIGNATURE_SIZE);
*nr_out_len += sprintf(nr_out_ptr + *nr_out_len, "CHAP_R=0x%s",
response);
*nr_out_len += 1;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 58/88] Revert "ubifs: xattr: Dont operate on deleted inodes"
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 57/88] scsi: target: iscsi: Use bin2hex " Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 59/88] libata: mask swap internal and hardware tag Greg Kroah-Hartman
` (33 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Koen Vandeputte, Joel Stanley,
Richard Weinberger
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <richard@nod.at>
commit f061c1cc404a618858a77aea233fde0aeaad2f2d upstream.
This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52.
UBIFS wants to assert that xattr operations are only issued on files
with positive link count. The said patch made this operations return
-ENOENT for unlinked files such that the asserts will no longer trigger.
This was wrong since xattr operations are perfectly fine on unlinked
files.
Instead the assertions need to be fixed/removed.
Cc: <stable@vger.kernel.org>
Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes")
Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ubifs/xattr.c | 24 ------------------------
1 file changed, 24 deletions(-)
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -152,12 +152,6 @@ static int create_xattr(struct ubifs_inf
ui->data_len = size;
mutex_lock(&host_ui->ui_mutex);
-
- if (!host->i_nlink) {
- err = -ENOENT;
- goto out_noent;
- }
-
host->i_ctime = current_time(host);
host_ui->xattr_cnt += 1;
host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm));
@@ -190,7 +184,6 @@ out_cancel:
host_ui->xattr_size -= CALC_XATTR_BYTES(size);
host_ui->xattr_names -= fname_len(nm);
host_ui->flags &= ~UBIFS_CRYPT_FL;
-out_noent:
mutex_unlock(&host_ui->ui_mutex);
out_free:
make_bad_inode(inode);
@@ -242,12 +235,6 @@ static int change_xattr(struct ubifs_inf
mutex_unlock(&ui->ui_mutex);
mutex_lock(&host_ui->ui_mutex);
-
- if (!host->i_nlink) {
- err = -ENOENT;
- goto out_noent;
- }
-
host->i_ctime = current_time(host);
host_ui->xattr_size -= CALC_XATTR_BYTES(old_size);
host_ui->xattr_size += CALC_XATTR_BYTES(size);
@@ -269,7 +256,6 @@ static int change_xattr(struct ubifs_inf
out_cancel:
host_ui->xattr_size -= CALC_XATTR_BYTES(size);
host_ui->xattr_size += CALC_XATTR_BYTES(old_size);
-out_noent:
mutex_unlock(&host_ui->ui_mutex);
make_bad_inode(inode);
out_free:
@@ -496,12 +482,6 @@ static int remove_xattr(struct ubifs_inf
return err;
mutex_lock(&host_ui->ui_mutex);
-
- if (!host->i_nlink) {
- err = -ENOENT;
- goto out_noent;
- }
-
host->i_ctime = current_time(host);
host_ui->xattr_cnt -= 1;
host_ui->xattr_size -= CALC_DENT_SIZE(fname_len(nm));
@@ -521,7 +501,6 @@ out_cancel:
host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm));
host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len);
host_ui->xattr_names += fname_len(nm);
-out_noent:
mutex_unlock(&host_ui->ui_mutex);
ubifs_release_budget(c, &req);
make_bad_inode(inode);
@@ -561,9 +540,6 @@ static int ubifs_xattr_remove(struct ino
ubifs_assert(inode_is_locked(host));
- if (!host->i_nlink)
- return -ENOENT;
-
if (fname_len(&nm) > UBIFS_MAX_NLEN)
return -ENAMETOOLONG;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 59/88] libata: mask swap internal and hardware tag
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 58/88] Revert "ubifs: xattr: Dont operate on deleted inodes" Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 60/88] ocfs2: fix ocfs2 read block panic Greg Kroah-Hartman
` (32 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Sbarra, Jens Axboe
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <axboe@kernel.dk>
commit 7ce5c8cd753f9afa8e79e9ec40351998e354f239 upstream.
hen we're comparing the hardware completion mask passed in from the
driver with the internal tag pending mask, we need to account for the
fact that the internal tag is different from the hardware tag. If not,
then we can end up either prematurely completing the internal tag (since
it's not set in the hw mask), or simply flag an error:
ata2: illegal qc_active transition (100000000->00000001)
If the internal tag is set, then swap that with the hardware tag in this
case before comparing with what the hardware reports.
Fixes: 28361c403683 ("libata: add extra internal command")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151
Cc: stable@vger.kernel.org
Reported-by: Paul Sbarra <sbarra.paul@gmail.com>
Tested-by: Paul Sbarra <sbarra.paul@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/libata-core.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5358,10 +5358,20 @@ void ata_qc_complete(struct ata_queued_c
*/
int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
{
+ u64 done_mask, ap_qc_active = ap->qc_active;
int nr_done = 0;
- u64 done_mask;
- done_mask = ap->qc_active ^ qc_active;
+ /*
+ * If the internal tag is set on ap->qc_active, then we care about
+ * bit0 on the passed in qc_active mask. Move that bit up to match
+ * the internal tag.
+ */
+ if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
+ qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
+ qc_active ^= qc_active & 0x01;
+ }
+
+ done_mask = ap_qc_active ^ qc_active;
if (unlikely(done_mask & qc_active)) {
ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 60/88] ocfs2: fix ocfs2 read block panic
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 59/88] libata: mask swap internal and hardware tag Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 61/88] drm/i915/bdw: Increase IPS disable timeout to 100ms Greg Kroah-Hartman
` (31 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Junxiao Bi, Joseph Qi, Mark Fasheh,
Joel Becker, Changwei Ge, Andrew Morton
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Junxiao Bi <junxiao.bi@oracle.com>
commit 234b69e3e089d850a98e7b3145bd00e9b52b1111 upstream.
While reading block, it is possible that io error return due to underlying
storage issue, in this case, BH_NeedsValidate was left in the buffer head.
Then when reading the very block next time, if it was already linked into
journal, that will trigger the following panic.
[203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342!
[203748.702533] invalid opcode: 0000 [#1] SMP
[203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod
[203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2
[203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015
[203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000
[203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206
[203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000
[203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe
[203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0
[203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000
[203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000
[203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000
[203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670
[203748.707124] Stack:
[203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001
[203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00
[203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000
[203748.708915] Call Trace:
[203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2]
[203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2]
[203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2]
[203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2]
[203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2]
[203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2]
[203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2]
[203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2]
[203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2]
[203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150
[203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210
[203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450
[203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600
[203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620
[203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0
[203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130
[203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220
[203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180
[203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190
[203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20
[203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7
[203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10
[203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.717775] RSP <ffff88006ff4b818>
Joesph ever reported a similar panic.
Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html
Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ocfs2/buffer_head_io.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -342,6 +342,7 @@ int ocfs2_read_blocks(struct ocfs2_cachi
* for this bh as it's not marked locally
* uptodate. */
status = -EIO;
+ clear_buffer_needs_validate(bh);
put_bh(bh);
bhs[i] = NULL;
continue;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 61/88] drm/i915/bdw: Increase IPS disable timeout to 100ms
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 60/88] ocfs2: fix ocfs2 read block panic Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 62/88] drm/nouveau: Reset MST branching unit before enabling Greg Kroah-Hartman
` (30 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Diego Viola, Imre Deak,
Ville Syrjälä,
Rodrigo Vivi
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Imre Deak <imre.deak@intel.com>
commit 92a6803149465e2339f8f7f8f6415d75be80073d upstream.
During IPS disabling the current 42ms timeout value leads to occasional
timeouts, increase it to 100ms which seems to get rid of the problem.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107494
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107562
Reported-by: Diego Viola <diego.viola@gmail.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Cc: Diego Viola <diego.viola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905100005.7663-1-imre.deak@intel.com
(cherry picked from commit acb3ef0ee40ea657280a4a11d9f60eb2937c0dca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/intel_display.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5062,10 +5062,14 @@ void hsw_disable_ips(const struct intel_
mutex_lock(&dev_priv->pcu_lock);
WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
mutex_unlock(&dev_priv->pcu_lock);
- /* wait for pcode to finish disabling IPS, which may take up to 42ms */
+ /*
+ * Wait for PCODE to finish disabling IPS. The BSpec specified
+ * 42ms timeout value leads to occasional timeouts so use 100ms
+ * instead.
+ */
if (intel_wait_for_register(dev_priv,
IPS_CTL, IPS_ENABLE, 0,
- 42))
+ 100))
DRM_ERROR("Timed out waiting for IPS disable\n");
} else {
I915_WRITE(IPS_CTL, 0);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 62/88] drm/nouveau: Reset MST branching unit before enabling
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 61/88] drm/i915/bdw: Increase IPS disable timeout to 100ms Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 63/88] drm/nouveau: Only write DP_MSTM_CTRL when needed Greg Kroah-Hartman
` (29 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit fa3cdf8d0b092c4561f9f017dfac409eb7644737 upstream.
When probing a new MST device, it's not safe to make any assumptions
about it's current state. While most well mannered MST hubs will just
disable the branching unit on hotplug disconnects, this isn't enough to
save us from various other scenarios that might have resulted in
something writing to the MST branching unit before we got control of it.
This could happen if a previous probe we tried failed, if we're booting
in kexec context and the hub is still in the state the last kernel put
it in, etc.
Luckily; there is no reason we can't just reset the branching unit
every time we enable a new topology. So, fix this by resetting it on
enabling new topologies to ensure that we always start off with a clean,
unmodified topology state on MST sinks.
This fixes occasional hard-lockups on my P50's laptop dock (e.g. AUX
times out all DPCD trasactions) observed after multiple docks, undocks,
and module reloads.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/dispnv50/disp.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -1098,17 +1098,21 @@ nv50_mstm_enable(struct nv50_mstm *mstm,
int ret;
if (dpcd >= 0x12) {
- ret = drm_dp_dpcd_readb(mstm->mgr.aux, DP_MSTM_CTRL, &dpcd);
+ /* Even if we're enabling MST, start with disabling the
+ * branching unit to clear any sink-side MST topology state
+ * that wasn't set by us
+ */
+ ret = drm_dp_dpcd_writeb(mstm->mgr.aux, DP_MSTM_CTRL, 0);
if (ret < 0)
return ret;
- dpcd &= ~DP_MST_EN;
- if (state)
- dpcd |= DP_MST_EN;
-
- ret = drm_dp_dpcd_writeb(mstm->mgr.aux, DP_MSTM_CTRL, dpcd);
- if (ret < 0)
- return ret;
+ if (state) {
+ /* Now, start initializing */
+ ret = drm_dp_dpcd_writeb(mstm->mgr.aux, DP_MSTM_CTRL,
+ DP_MST_EN);
+ if (ret < 0)
+ return ret;
+ }
}
return nvif_mthd(disp, 0, &args, sizeof(args));
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 63/88] drm/nouveau: Only write DP_MSTM_CTRL when needed
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 62/88] drm/nouveau: Reset MST branching unit before enabling Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 64/88] drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend() Greg Kroah-Hartman
` (28 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit b26b4590dd53e012526342e749c423e6c0e73437 upstream.
Currently, nouveau will re-write the DP_MSTM_CTRL register for an MST
hub every time it receives a long HPD pulse on DP. This isn't actually
necessary and additionally, has some unintended side effects.
With the P50 I've got here, rewriting DP_MSTM_CTRL constantly seems to
make it rather likely (1 out of 5 times usually) that bringing up MST
with it's ThinkPad dock will fail and result in sideband messages timing
out in the middle. Afterwards, successive probes don't manage to get the
dock to communicate properly over MST sideband properly.
Many times sideband message timeouts from MST hubs are indicative of
either the source or the sink dropping an ESI event, which can cause
DRM's perspective of the topology's current state to go out of sync with
reality. While it's tough to really know for sure what's happening to
the dock, using userspace tools to write to DP_MSTM_CTRL in the middle
of the MST link probing process does appear to make things flaky. It's
possible that when we write to DP_MSTM_CTRL, the function that gets
triggered to respond in the dock's firmware temporarily puts it in a
state where it might end up not reporting an ESI to the source, or ends
up dropping a sideband message we sent it.
So, to fix this we make it so that when probing an MST topology, we
respect it's current state. If the dock's already enabled, we simply
read DP_MSTM_CTRL and disable the topology if it's value is not what we
expected. Otherwise, we perform the normal MST probing dance. We avoid
taking any action except if the state of the MST topology actually
changes.
This fixes MST sideband message timeouts and detection failures on my
P50 with its ThinkPad dock.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/dispnv50/disp.c | 45 +++++++++++++++++++++++++-------
1 file changed, 36 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -1121,31 +1121,58 @@ nv50_mstm_enable(struct nv50_mstm *mstm,
int
nv50_mstm_detect(struct nv50_mstm *mstm, u8 dpcd[8], int allow)
{
- int ret, state = 0;
+ struct drm_dp_aux *aux;
+ int ret;
+ bool old_state, new_state;
+ u8 mstm_ctrl;
if (!mstm)
return 0;
- if (dpcd[0] >= 0x12) {
- ret = drm_dp_dpcd_readb(mstm->mgr.aux, DP_MSTM_CAP, &dpcd[1]);
+ mutex_lock(&mstm->mgr.lock);
+
+ old_state = mstm->mgr.mst_state;
+ new_state = old_state;
+ aux = mstm->mgr.aux;
+
+ if (old_state) {
+ /* Just check that the MST hub is still as we expect it */
+ ret = drm_dp_dpcd_readb(aux, DP_MSTM_CTRL, &mstm_ctrl);
+ if (ret < 0 || !(mstm_ctrl & DP_MST_EN)) {
+ DRM_DEBUG_KMS("Hub gone, disabling MST topology\n");
+ new_state = false;
+ }
+ } else if (dpcd[0] >= 0x12) {
+ ret = drm_dp_dpcd_readb(aux, DP_MSTM_CAP, &dpcd[1]);
if (ret < 0)
- return ret;
+ goto probe_error;
if (!(dpcd[1] & DP_MST_CAP))
dpcd[0] = 0x11;
else
- state = allow;
+ new_state = allow;
+ }
+
+ if (new_state == old_state) {
+ mutex_unlock(&mstm->mgr.lock);
+ return new_state;
}
- ret = nv50_mstm_enable(mstm, dpcd[0], state);
+ ret = nv50_mstm_enable(mstm, dpcd[0], new_state);
if (ret)
- return ret;
+ goto probe_error;
- ret = drm_dp_mst_topology_mgr_set_mst(&mstm->mgr, state);
+ mutex_unlock(&mstm->mgr.lock);
+
+ ret = drm_dp_mst_topology_mgr_set_mst(&mstm->mgr, new_state);
if (ret)
return nv50_mstm_enable(mstm, dpcd[0], 0);
- return mstm->mgr.mst_state;
+ return new_state;
+
+probe_error:
+ mutex_unlock(&mstm->mgr.lock);
+ return ret;
}
static void
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 64/88] drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend()
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 63/88] drm/nouveau: Only write DP_MSTM_CTRL when needed Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 65/88] drm/nouveau: Fix deadlocks in nouveau_connector_detect() Greg Kroah-Hartman
` (27 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst,
Daniel Vetter, Lukas Wunner, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 611ce855420a6e8b9ff47af5f47431d52c7709f8 upstream.
Since actual hotplug notifications don't get disabled until
nouveau_display_fini() is called, all this will do is cause any hotplugs
that happen between this drm_kms_helper_poll_disable() call and the
actual hotplug disablement to potentially be dropped if ACPI isn't
around to help us.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_drm.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -835,7 +835,6 @@ nouveau_pmops_runtime_suspend(struct dev
return -EBUSY;
}
- drm_kms_helper_poll_disable(drm_dev);
nouveau_switcheroo_optimus_dsm();
ret = nouveau_do_suspend(drm_dev, true);
pci_save_state(pdev);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 65/88] drm/nouveau: Fix deadlocks in nouveau_connector_detect()
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 64/88] drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend() Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 66/88] drm/nouveau/drm/nouveau: Dont forget to cancel hpd_work on suspend/unload Greg Kroah-Hartman
` (26 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst,
Daniel Vetter, Lukas Wunner, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 3e1a12754d4df5804bfca5dedf09d2ba291bdc2a upstream.
When we disable hotplugging on the GPU, we need to be able to
synchronize with each connector's hotplug interrupt handler before the
interrupt is finally disabled. This can be a problem however, since
nouveau_connector_detect() currently grabs a runtime power reference
when handling connector probing. This will deadlock the runtime suspend
handler like so:
[ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds.
[ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
[ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 861.486332] kworker/0:2 D 0 61 2 0x80000000
[ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau]
[ 861.487737] Call Trace:
[ 861.488394] __schedule+0x322/0xaf0
[ 861.489070] schedule+0x33/0x90
[ 861.489744] rpm_resume+0x19c/0x850
[ 861.490392] ? finish_wait+0x90/0x90
[ 861.491068] __pm_runtime_resume+0x4e/0x90
[ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau]
[ 861.492416] process_one_work+0x231/0x620
[ 861.493068] worker_thread+0x44/0x3a0
[ 861.493722] kthread+0x12b/0x150
[ 861.494342] ? wq_pool_ids_show+0x140/0x140
[ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70
[ 861.495648] ret_from_fork+0x3a/0x50
[ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds.
[ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
[ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 861.498341] kworker/6:2 D 0 320 2 0x80000080
[ 861.499045] Workqueue: pm pm_runtime_work
[ 861.499739] Call Trace:
[ 861.500428] __schedule+0x322/0xaf0
[ 861.501134] ? wait_for_completion+0x104/0x190
[ 861.501851] schedule+0x33/0x90
[ 861.502564] schedule_timeout+0x3a5/0x590
[ 861.503284] ? mark_held_locks+0x58/0x80
[ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40
[ 861.504710] ? wait_for_completion+0x104/0x190
[ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190
[ 861.506136] ? wait_for_completion+0x104/0x190
[ 861.506845] wait_for_completion+0x12c/0x190
[ 861.507555] ? wake_up_q+0x80/0x80
[ 861.508268] flush_work+0x1c9/0x280
[ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0
[ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau]
[ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau]
[ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau]
[ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau]
[ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau]
[ 861.513435] pci_pm_runtime_suspend+0x6b/0x180
[ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70
[ 861.514897] __rpm_callback+0x7a/0x1d0
[ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70
[ 861.516313] rpm_callback+0x24/0x80
[ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70
[ 861.517741] rpm_suspend+0x142/0x6b0
[ 861.518449] pm_runtime_work+0x97/0xc0
[ 861.519144] process_one_work+0x231/0x620
[ 861.519831] worker_thread+0x44/0x3a0
[ 861.520522] kthread+0x12b/0x150
[ 861.521220] ? wq_pool_ids_show+0x140/0x140
[ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70
[ 861.522622] ret_from_fork+0x3a/0x50
[ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds.
[ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1
[ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 861.525349] kworker/6:0 D 0 1329 2 0x80000000
[ 861.526073] Workqueue: events nvif_notify_work [nouveau]
[ 861.526751] Call Trace:
[ 861.527411] __schedule+0x322/0xaf0
[ 861.528089] schedule+0x33/0x90
[ 861.528758] rpm_resume+0x19c/0x850
[ 861.529399] ? finish_wait+0x90/0x90
[ 861.530073] __pm_runtime_resume+0x4e/0x90
[ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau]
[ 861.531459] ? ww_mutex_lock+0x47/0x80
[ 861.532097] ? ww_mutex_lock+0x47/0x80
[ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm]
[ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper]
[ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper]
[ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau]
[ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau]
[ 861.536221] process_one_work+0x231/0x620
[ 861.536994] worker_thread+0x44/0x3a0
[ 861.537757] kthread+0x12b/0x150
[ 861.538463] ? wq_pool_ids_show+0x140/0x140
[ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70
[ 861.539815] ret_from_fork+0x3a/0x50
[ 861.540521]
Showing all locks held in the system:
[ 861.541696] 2 locks held by kworker/0:2/61:
[ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620
[ 861.543814] 1 lock held by khungtaskd/64:
[ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185
[ 861.545160] 3 locks held by kworker/6:2/320:
[ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620
[ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620
[ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau]
[ 861.548146] 1 lock held by dmesg/983:
[ 861.548889] 2 locks held by zsh/1250:
[ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40
[ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870
[ 861.551122] 6 locks held by kworker/6:0/1329:
[ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[ 861.552765] #1: 00000000ddb499ad ((work_completion)(¬ify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620
[ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper]
[ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper]
[ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper]
[ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm]
[ 861.557864] =============================================
[ 861.559507] NMI backtrace for cpu 2
[ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1
[ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018
[ 861.561948] Call Trace:
[ 861.562757] dump_stack+0x8e/0xd3
[ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a
[ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42
[ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae
[ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20
[ 861.566558] watchdog+0x316/0x580
[ 861.567355] kthread+0x12b/0x150
[ 861.568114] ? reset_hung_task_detector+0x20/0x20
[ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70
[ 861.569598] ret_from_fork+0x3a/0x50
[ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7:
[ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120
[ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120
[ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120
[ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120
[ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120
[ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120
[ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120
[ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks
So: fix this by making it so that normal hotplug handling /only/ happens
so long as the GPU is currently awake without any pending runtime PM
requests. In the event that a hotplug occurs while the device is
suspending or resuming, we can simply defer our response until the GPU
is fully runtime resumed again.
Changes since v4:
- Use a new trick I came up with using pm_runtime_get() instead of the
hackish junk we had before
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_connector.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -1120,6 +1120,26 @@ nouveau_connector_hotplug(struct nvif_no
const struct nvif_notify_conn_rep_v0 *rep = notify->data;
const char *name = connector->name;
struct nouveau_encoder *nv_encoder;
+ int ret;
+
+ ret = pm_runtime_get(drm->dev->dev);
+ if (ret == 0) {
+ /* We can't block here if there's a pending PM request
+ * running, as we'll deadlock nouveau_display_fini() when it
+ * calls nvif_put() on our nvif_notify struct. So, simply
+ * defer the hotplug event until the device finishes resuming
+ */
+ NV_DEBUG(drm, "Deferring HPD on %s until runtime resume\n",
+ name);
+ schedule_work(&drm->hpd_work);
+
+ pm_runtime_put_noidle(drm->dev->dev);
+ return NVIF_NOTIFY_KEEP;
+ } else if (ret != 1 && ret != -EACCES) {
+ NV_WARN(drm, "HPD on %s dropped due to RPM failure: %d\n",
+ name, ret);
+ return NVIF_NOTIFY_DROP;
+ }
if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) {
NV_DEBUG(drm, "service %s\n", name);
@@ -1137,6 +1157,8 @@ nouveau_connector_hotplug(struct nvif_no
drm_helper_hpd_irq_event(connector->dev);
}
+ pm_runtime_mark_last_busy(drm->dev->dev);
+ pm_runtime_put_autosuspend(drm->dev->dev);
return NVIF_NOTIFY_KEEP;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 66/88] drm/nouveau/drm/nouveau: Dont forget to cancel hpd_work on suspend/unload
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 65/88] drm/nouveau: Fix deadlocks in nouveau_connector_detect() Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 67/88] drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement Greg Kroah-Hartman
` (25 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lyude Paul, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 2f7ca781fd382cf8dde73ed36dfdd93fd05b3332 upstream.
Currently, there's nothing in nouveau that actually cancels this work
struct. So, cancel it on suspend/unload. Otherwise, if we're unlucky
enough hpd_work might try to keep running up until the system is
suspended.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_display.c | 9 ++++++---
drivers/gpu/drm/nouveau/nouveau_display.h | 2 +-
drivers/gpu/drm/nouveau/nouveau_drm.c | 2 +-
3 files changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -425,7 +425,7 @@ nouveau_display_init(struct drm_device *
}
void
-nouveau_display_fini(struct drm_device *dev, bool suspend)
+nouveau_display_fini(struct drm_device *dev, bool suspend, bool runtime)
{
struct nouveau_display *disp = nouveau_display(dev);
struct nouveau_drm *drm = nouveau_drm(dev);
@@ -450,6 +450,9 @@ nouveau_display_fini(struct drm_device *
}
drm_connector_list_iter_end(&conn_iter);
+ if (!runtime)
+ cancel_work_sync(&drm->hpd_work);
+
drm_kms_helper_poll_disable(dev);
disp->fini(dev);
}
@@ -618,11 +621,11 @@ nouveau_display_suspend(struct drm_devic
}
}
- nouveau_display_fini(dev, true);
+ nouveau_display_fini(dev, true, runtime);
return 0;
}
- nouveau_display_fini(dev, true);
+ nouveau_display_fini(dev, true, runtime);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_framebuffer *nouveau_fb;
--- a/drivers/gpu/drm/nouveau/nouveau_display.h
+++ b/drivers/gpu/drm/nouveau/nouveau_display.h
@@ -62,7 +62,7 @@ nouveau_display(struct drm_device *dev)
int nouveau_display_create(struct drm_device *dev);
void nouveau_display_destroy(struct drm_device *dev);
int nouveau_display_init(struct drm_device *dev);
-void nouveau_display_fini(struct drm_device *dev, bool suspend);
+void nouveau_display_fini(struct drm_device *dev, bool suspend, bool runtime);
int nouveau_display_suspend(struct drm_device *dev, bool runtime);
void nouveau_display_resume(struct drm_device *dev, bool runtime);
int nouveau_display_vblank_enable(struct drm_device *, unsigned int);
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -629,7 +629,7 @@ nouveau_drm_unload(struct drm_device *de
nouveau_debugfs_fini(drm);
if (dev->mode_config.num_crtc)
- nouveau_display_fini(dev, false);
+ nouveau_display_fini(dev, false, false);
nouveau_display_destroy(dev);
nouveau_bios_takedown(dev);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 67/88] drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 66/88] drm/nouveau/drm/nouveau: Dont forget to cancel hpd_work on suspend/unload Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 68/88] drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests Greg Kroah-Hartman
` (24 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst,
Daniel Vetter, Lukas Wunner, Peter Ujfalusi, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit d77ef138ff572409ab93d492e5e6c826ee6fb21d upstream.
Turns out this part is my fault for not noticing when reviewing
9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling"). Currently
we call drm_kms_helper_poll_enable() from nouveau_display_hpd_work().
This makes basically no sense however, because that means we're calling
drm_kms_helper_poll_enable() every time we schedule the hotplug
detection work. This is also against the advice mentioned in
drm_kms_helper_poll_enable()'s documentation:
Note that calls to enable and disable polling must be strictly ordered,
which is automatically the case when they're only call from
suspend/resume callbacks.
Of course, hotplugs can't really be ordered. They could even happen
immediately after we called drm_kms_helper_poll_disable() in
nouveau_display_fini(), which can lead to all sorts of issues.
Additionally; enabling polling /after/ we call
drm_helper_hpd_irq_event() could also mean that we'd miss a hotplug
event anyway, since drm_helper_hpd_irq_event() wouldn't bother trying to
probe connectors so long as polling is disabled.
So; simply move this back into nouveau_display_init() again. The race
condition that both of these patches attempted to work around has
already been fixed properly in
d61a5c106351 ("drm/nouveau: Fix deadlock on runtime suspend")
Fixes: 9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_display.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -355,8 +355,6 @@ nouveau_display_hpd_work(struct work_str
pm_runtime_get_sync(drm->dev->dev);
drm_helper_hpd_irq_event(drm->dev);
- /* enable polling for external displays */
- drm_kms_helper_poll_enable(drm->dev);
pm_runtime_mark_last_busy(drm->dev->dev);
pm_runtime_put_sync(drm->dev->dev);
@@ -411,6 +409,11 @@ nouveau_display_init(struct drm_device *
if (ret)
return ret;
+ /* enable connector detection and polling for connectors without HPD
+ * support
+ */
+ drm_kms_helper_poll_enable(dev);
+
/* enable hotplug interrupts */
drm_connector_list_iter_begin(dev, &conn_iter);
nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) {
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 68/88] drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 67/88] drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 69/88] drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect() Greg Kroah-Hartman
` (23 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst,
Daniel Vetter, Lukas Wunner, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 7fec8f5379fb6eddabc0aaef6d2304c366808f97 upstream.
Currently, nouveau uses the generic drm_fb_helper_output_poll_changed()
function provided by DRM as it's output_poll_changed callback.
Unfortunately however, this function doesn't grab runtime PM references
early enough and even if it did-we can't block waiting for the device to
resume in output_poll_changed() since it's very likely that we'll need
to grab the fb_helper lock at some point during the runtime resume
process. This currently results in deadlocking like so:
[ 246.669625] INFO: task kworker/4:0:37 blocked for more than 120 seconds.
[ 246.673398] Not tainted 4.18.0-rc5Lyude-Test+ #2
[ 246.675271] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 246.676527] kworker/4:0 D 0 37 2 0x80000000
[ 246.677580] Workqueue: events output_poll_execute [drm_kms_helper]
[ 246.678704] Call Trace:
[ 246.679753] __schedule+0x322/0xaf0
[ 246.680916] schedule+0x33/0x90
[ 246.681924] schedule_preempt_disabled+0x15/0x20
[ 246.683023] __mutex_lock+0x569/0x9a0
[ 246.684035] ? kobject_uevent_env+0x117/0x7b0
[ 246.685132] ? drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper]
[ 246.686179] mutex_lock_nested+0x1b/0x20
[ 246.687278] ? mutex_lock_nested+0x1b/0x20
[ 246.688307] drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper]
[ 246.689420] drm_fb_helper_output_poll_changed+0x23/0x30 [drm_kms_helper]
[ 246.690462] drm_kms_helper_hotplug_event+0x2a/0x30 [drm_kms_helper]
[ 246.691570] output_poll_execute+0x198/0x1c0 [drm_kms_helper]
[ 246.692611] process_one_work+0x231/0x620
[ 246.693725] worker_thread+0x214/0x3a0
[ 246.694756] kthread+0x12b/0x150
[ 246.695856] ? wq_pool_ids_show+0x140/0x140
[ 246.696888] ? kthread_create_worker_on_cpu+0x70/0x70
[ 246.697998] ret_from_fork+0x3a/0x50
[ 246.699034] INFO: task kworker/0:1:60 blocked for more than 120 seconds.
[ 246.700153] Not tainted 4.18.0-rc5Lyude-Test+ #2
[ 246.701182] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 246.702278] kworker/0:1 D 0 60 2 0x80000000
[ 246.703293] Workqueue: pm pm_runtime_work
[ 246.704393] Call Trace:
[ 246.705403] __schedule+0x322/0xaf0
[ 246.706439] ? wait_for_completion+0x104/0x190
[ 246.707393] schedule+0x33/0x90
[ 246.708375] schedule_timeout+0x3a5/0x590
[ 246.709289] ? mark_held_locks+0x58/0x80
[ 246.710208] ? _raw_spin_unlock_irq+0x2c/0x40
[ 246.711222] ? wait_for_completion+0x104/0x190
[ 246.712134] ? trace_hardirqs_on_caller+0xf4/0x190
[ 246.713094] ? wait_for_completion+0x104/0x190
[ 246.713964] wait_for_completion+0x12c/0x190
[ 246.714895] ? wake_up_q+0x80/0x80
[ 246.715727] ? get_work_pool+0x90/0x90
[ 246.716649] flush_work+0x1c9/0x280
[ 246.717483] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0
[ 246.718442] __cancel_work_timer+0x146/0x1d0
[ 246.719247] cancel_delayed_work_sync+0x13/0x20
[ 246.720043] drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper]
[ 246.721123] nouveau_pmops_runtime_suspend+0x3d/0xb0 [nouveau]
[ 246.721897] pci_pm_runtime_suspend+0x6b/0x190
[ 246.722825] ? pci_has_legacy_pm_support+0x70/0x70
[ 246.723737] __rpm_callback+0x7a/0x1d0
[ 246.724721] ? pci_has_legacy_pm_support+0x70/0x70
[ 246.725607] rpm_callback+0x24/0x80
[ 246.726553] ? pci_has_legacy_pm_support+0x70/0x70
[ 246.727376] rpm_suspend+0x142/0x6b0
[ 246.728185] pm_runtime_work+0x97/0xc0
[ 246.728938] process_one_work+0x231/0x620
[ 246.729796] worker_thread+0x44/0x3a0
[ 246.730614] kthread+0x12b/0x150
[ 246.731395] ? wq_pool_ids_show+0x140/0x140
[ 246.732202] ? kthread_create_worker_on_cpu+0x70/0x70
[ 246.732878] ret_from_fork+0x3a/0x50
[ 246.733768] INFO: task kworker/4:2:422 blocked for more than 120 seconds.
[ 246.734587] Not tainted 4.18.0-rc5Lyude-Test+ #2
[ 246.735393] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 246.736113] kworker/4:2 D 0 422 2 0x80000080
[ 246.736789] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[ 246.737665] Call Trace:
[ 246.738490] __schedule+0x322/0xaf0
[ 246.739250] schedule+0x33/0x90
[ 246.739908] rpm_resume+0x19c/0x850
[ 246.740750] ? finish_wait+0x90/0x90
[ 246.741541] __pm_runtime_resume+0x4e/0x90
[ 246.742370] nv50_disp_atomic_commit+0x31/0x210 [nouveau]
[ 246.743124] drm_atomic_commit+0x4a/0x50 [drm]
[ 246.743775] restore_fbdev_mode_atomic+0x1c8/0x240 [drm_kms_helper]
[ 246.744603] restore_fbdev_mode+0x31/0x140 [drm_kms_helper]
[ 246.745373] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper]
[ 246.746220] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
[ 246.746884] drm_fb_helper_hotplug_event.part.28+0x96/0xb0 [drm_kms_helper]
[ 246.747675] drm_fb_helper_output_poll_changed+0x23/0x30 [drm_kms_helper]
[ 246.748544] drm_kms_helper_hotplug_event+0x2a/0x30 [drm_kms_helper]
[ 246.749439] nv50_mstm_hotplug+0x15/0x20 [nouveau]
[ 246.750111] drm_dp_send_link_address+0x177/0x1c0 [drm_kms_helper]
[ 246.750764] drm_dp_check_and_send_link_address+0xa8/0xd0 [drm_kms_helper]
[ 246.751602] drm_dp_mst_link_probe_work+0x51/0x90 [drm_kms_helper]
[ 246.752314] process_one_work+0x231/0x620
[ 246.752979] worker_thread+0x44/0x3a0
[ 246.753838] kthread+0x12b/0x150
[ 246.754619] ? wq_pool_ids_show+0x140/0x140
[ 246.755386] ? kthread_create_worker_on_cpu+0x70/0x70
[ 246.756162] ret_from_fork+0x3a/0x50
[ 246.756847]
Showing all locks held in the system:
[ 246.758261] 3 locks held by kworker/4:0/37:
[ 246.759016] #0: 00000000f8df4d2d ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[ 246.759856] #1: 00000000e6065461 ((work_completion)(&(&dev->mode_config.output_poll_work)->work)){+.+.}, at: process_one_work+0x1b3/0x620
[ 246.760670] #2: 00000000cb66735f (&helper->lock){+.+.}, at: drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper]
[ 246.761516] 2 locks held by kworker/0:1/60:
[ 246.762274] #0: 00000000fff6be0f ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620
[ 246.762982] #1: 000000005ab44fb4 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620
[ 246.763890] 1 lock held by khungtaskd/64:
[ 246.764664] #0: 000000008cb8b5c3 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185
[ 246.765588] 5 locks held by kworker/4:2/422:
[ 246.766440] #0: 00000000232f0959 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x1b3/0x620
[ 246.767390] #1: 00000000bb59b134 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x1b3/0x620
[ 246.768154] #2: 00000000cb66735f (&helper->lock){+.+.}, at: drm_fb_helper_restore_fbdev_mode_unlocked+0x4c/0xb0 [drm_kms_helper]
[ 246.768966] #3: 000000004c8f0b6b (crtc_ww_class_acquire){+.+.}, at: restore_fbdev_mode_atomic+0x4b/0x240 [drm_kms_helper]
[ 246.769921] #4: 000000004c34a296 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8a/0x1b0 [drm]
[ 246.770839] 1 lock held by dmesg/1038:
[ 246.771739] 2 locks held by zsh/1172:
[ 246.772650] #0: 00000000836d0438 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40
[ 246.773680] #1: 000000001f4f4d48 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870
[ 246.775522] =============================================
After trying dozens of different solutions, I found one very simple one
that should also have the benefit of preventing us from having to fight
locking for the rest of our lives. So, we work around these deadlocks by
deferring all fbcon hotplug events that happen after the runtime suspend
process starts until after the device is resumed again.
Changes since v7:
- Fixup commit message - Daniel Vetter
Changes since v6:
- Remove unused nouveau_fbcon_hotplugged_in_suspend() - Ilia
Changes since v5:
- Come up with the (hopefully final) solution for solving this dumb
problem, one that is a lot less likely to cause issues with locking in
the future. This should work around all deadlock conditions with fbcon
brought up thus far.
Changes since v4:
- Add nouveau_fbcon_hotplugged_in_suspend() to workaround deadlock
condition that Lukas described
- Just move all of this out of drm_fb_helper. It seems that other DRM
drivers have already figured out other workarounds for this. If other
drivers do end up needing this in the future, we can just move this
back into drm_fb_helper again.
Changes since v3:
- Actually check if fb_helper is NULL in both new helpers
- Actually check drm_fbdev_emulation in both new helpers
- Don't fire off a fb_helper hotplug unconditionally; only do it if
the following conditions are true (as otherwise, calling this in the
wrong spot will cause Bad Things to happen):
- fb_helper hotplug handling was actually inhibited previously
- fb_helper actually has a delayed hotplug pending
- fb_helper is actually bound
- fb_helper is actually initialized
- Add __must_check to drm_fb_helper_suspend_hotplug(). There's no
situation where a driver would actually want to use this without
checking the return value, so enforce that
- Rewrite and clarify the documentation for both helpers.
- Make sure to return true in the drm_fb_helper_suspend_hotplug() stub
that's provided in drm_fb_helper.h when CONFIG_DRM_FBDEV_EMULATION
isn't enabled
- Actually grab the toplevel fb_helper lock in
drm_fb_helper_resume_hotplug(), since it's possible other activity
(such as a hotplug) could be going on at the same time the driver
calls drm_fb_helper_resume_hotplug(). We need this to check whether or
not drm_fb_helper_hotplug_event() needs to be called anyway
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 -
drivers/gpu/drm/nouveau/nouveau_display.c | 2 -
drivers/gpu/drm/nouveau/nouveau_fbcon.c | 57 ++++++++++++++++++++++++++++++
drivers/gpu/drm/nouveau/nouveau_fbcon.h | 5 ++
4 files changed, 64 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -2080,7 +2080,7 @@ nv50_disp_atomic_state_alloc(struct drm_
static const struct drm_mode_config_funcs
nv50_disp_func = {
.fb_create = nouveau_user_framebuffer_create,
- .output_poll_changed = drm_fb_helper_output_poll_changed,
+ .output_poll_changed = nouveau_fbcon_output_poll_changed,
.atomic_check = nv50_disp_atomic_check,
.atomic_commit = nv50_disp_atomic_commit,
.atomic_state_alloc = nv50_disp_atomic_state_alloc,
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -293,7 +293,7 @@ nouveau_user_framebuffer_create(struct d
static const struct drm_mode_config_funcs nouveau_mode_config_funcs = {
.fb_create = nouveau_user_framebuffer_create,
- .output_poll_changed = drm_fb_helper_output_poll_changed,
+ .output_poll_changed = nouveau_fbcon_output_poll_changed,
};
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -466,6 +466,7 @@ nouveau_fbcon_set_suspend_work(struct wo
console_unlock();
if (state == FBINFO_STATE_RUNNING) {
+ nouveau_fbcon_hotplug_resume(drm->fbcon);
pm_runtime_mark_last_busy(drm->dev->dev);
pm_runtime_put_sync(drm->dev->dev);
}
@@ -487,6 +488,61 @@ nouveau_fbcon_set_suspend(struct drm_dev
schedule_work(&drm->fbcon_work);
}
+void
+nouveau_fbcon_output_poll_changed(struct drm_device *dev)
+{
+ struct nouveau_drm *drm = nouveau_drm(dev);
+ struct nouveau_fbdev *fbcon = drm->fbcon;
+ int ret;
+
+ if (!fbcon)
+ return;
+
+ mutex_lock(&fbcon->hotplug_lock);
+
+ ret = pm_runtime_get(dev->dev);
+ if (ret == 1 || ret == -EACCES) {
+ drm_fb_helper_hotplug_event(&fbcon->helper);
+
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+ } else if (ret == 0) {
+ /* If the GPU was already in the process of suspending before
+ * this event happened, then we can't block here as we'll
+ * deadlock the runtime pmops since they wait for us to
+ * finish. So, just defer this event for when we runtime
+ * resume again. It will be handled by fbcon_work.
+ */
+ NV_DEBUG(drm, "fbcon HPD event deferred until runtime resume\n");
+ fbcon->hotplug_waiting = true;
+ pm_runtime_put_noidle(drm->dev->dev);
+ } else {
+ DRM_WARN("fbcon HPD event lost due to RPM failure: %d\n",
+ ret);
+ }
+
+ mutex_unlock(&fbcon->hotplug_lock);
+}
+
+void
+nouveau_fbcon_hotplug_resume(struct nouveau_fbdev *fbcon)
+{
+ struct nouveau_drm *drm;
+
+ if (!fbcon)
+ return;
+ drm = nouveau_drm(fbcon->helper.dev);
+
+ mutex_lock(&fbcon->hotplug_lock);
+ if (fbcon->hotplug_waiting) {
+ fbcon->hotplug_waiting = false;
+
+ NV_DEBUG(drm, "Handling deferred fbcon HPD events\n");
+ drm_fb_helper_hotplug_event(&fbcon->helper);
+ }
+ mutex_unlock(&fbcon->hotplug_lock);
+}
+
int
nouveau_fbcon_init(struct drm_device *dev)
{
@@ -505,6 +561,7 @@ nouveau_fbcon_init(struct drm_device *de
drm->fbcon = fbcon;
INIT_WORK(&drm->fbcon_work, nouveau_fbcon_set_suspend_work);
+ mutex_init(&fbcon->hotplug_lock);
drm_fb_helper_prepare(dev, &fbcon->helper, &nouveau_fbcon_helper_funcs);
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
@@ -41,6 +41,9 @@ struct nouveau_fbdev {
struct nvif_object gdi;
struct nvif_object blit;
struct nvif_object twod;
+
+ struct mutex hotplug_lock;
+ bool hotplug_waiting;
};
void nouveau_fbcon_restore(void);
@@ -68,6 +71,8 @@ void nouveau_fbcon_set_suspend(struct dr
void nouveau_fbcon_accel_save_disable(struct drm_device *dev);
void nouveau_fbcon_accel_restore(struct drm_device *dev);
+void nouveau_fbcon_output_poll_changed(struct drm_device *dev);
+void nouveau_fbcon_hotplug_resume(struct nouveau_fbdev *fbcon);
extern int nouveau_nofbaccel;
#endif /* __NV50_FBCON_H__ */
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 69/88] drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 68/88] drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 70/88] drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early Greg Kroah-Hartman
` (22 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst,
Daniel Vetter, Lukas Wunner, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 6833fb1ec120bf078e1a527c573a09d4de286224 upstream.
It's true we can't resume the device from poll workers in
nouveau_connector_detect(). We can however, prevent the autosuspend
timer from elapsing immediately if it hasn't already without risking any
sort of deadlock with the runtime suspend/resume operations. So do that
instead of entirely avoiding grabbing a power reference.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_connector.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -570,12 +570,16 @@ nouveau_connector_detect(struct drm_conn
nv_connector->edid = NULL;
}
- /* Outputs are only polled while runtime active, so acquiring a
- * runtime PM ref here is unnecessary (and would deadlock upon
- * runtime suspend because it waits for polling to finish).
+ /* Outputs are only polled while runtime active, so resuming the
+ * device here is unnecessary (and would deadlock upon runtime suspend
+ * because it waits for polling to finish). We do however, want to
+ * prevent the autosuspend timer from elapsing during this operation
+ * if possible.
*/
- if (!drm_kms_helper_is_poll_worker()) {
- ret = pm_runtime_get_sync(connector->dev->dev);
+ if (drm_kms_helper_is_poll_worker()) {
+ pm_runtime_get_noresume(dev->dev);
+ } else {
+ ret = pm_runtime_get_sync(dev->dev);
if (ret < 0 && ret != -EACCES)
return conn_status;
}
@@ -653,10 +657,8 @@ detect_analog:
out:
- if (!drm_kms_helper_is_poll_worker()) {
- pm_runtime_mark_last_busy(connector->dev->dev);
- pm_runtime_put_autosuspend(connector->dev->dev);
- }
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
return conn_status;
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 70/88] drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 69/88] drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect() Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 71/88] drm/vc4: Fix the "no scaling" case on multi-planar YUV formats Greg Kroah-Hartman
` (21 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Karol Herbst, Ben Skeggs
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 79e765ad665da4b8aa7e9c878bd2fef837f6fea5 upstream.
On most systems with ACPI hotplugging support, it seems that we always
receive a hotplug event once we re-enable EC interrupts even if the GPU
hasn't even been resumed yet.
This can cause problems since even though we schedule hpd_work to handle
connector reprobing for us, hpd_work synchronizes on
pm_runtime_get_sync() to wait until the device is ready to perform
reprobing. Since runtime suspend/resume callbacks are disabled before
the PM core calls ->suspend(), any calls to pm_runtime_get_sync() during
this period will grab a runtime PM ref and return immediately with
-EACCES. Because we schedule hpd_work from our ACPI HPD handler, and
hpd_work synchronizes on pm_runtime_get_sync(), this causes us to launch
a connector reprobe immediately even if the GPU isn't actually resumed
just yet. This causes various warnings in dmesg and occasionally, also
prevents some displays connected to the dedicated GPU from coming back
up after suspend. Example:
usb 1-4: USB disconnect, device number 14
usb 1-4.1: USB disconnect, device number 15
WARNING: CPU: 0 PID: 838 at drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h:170 nouveau_dp_detect+0x17e/0x370 [nouveau]
CPU: 0 PID: 838 Comm: kworker/0:6 Not tainted 4.17.14-201.Lyude.bz1477182.V3.fc28.x86_64 #1
Hardware name: LENOVO 20EQS64N00/20EQS64N00, BIOS N1EET77W (1.50 ) 03/28/2018
Workqueue: events nouveau_display_hpd_work [nouveau]
RIP: 0010:nouveau_dp_detect+0x17e/0x370 [nouveau]
RSP: 0018:ffffa15143933cf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8cb4f656c400 RCX: 0000000000000000
RDX: ffffa1514500e4e4 RSI: ffffa1514500e4e4 RDI: 0000000001009002
RBP: ffff8cb4f4a8a800 R08: ffffa15143933cfd R09: ffffa15143933cfc
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8cb4fb57a000
R13: ffff8cb4fb57a000 R14: ffff8cb4f4a8f800 R15: ffff8cb4f656c418
FS: 0000000000000000(0000) GS:ffff8cb51f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f78ec938000 CR3: 000000073720a003 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? _cond_resched+0x15/0x30
nouveau_connector_detect+0x2ce/0x520 [nouveau]
? _cond_resched+0x15/0x30
? ww_mutex_lock+0x12/0x40
drm_helper_probe_detect_ctx+0x8b/0xe0 [drm_kms_helper]
drm_helper_hpd_irq_event+0xa8/0x120 [drm_kms_helper]
nouveau_display_hpd_work+0x2a/0x60 [nouveau]
process_one_work+0x187/0x340
worker_thread+0x2e/0x380
? pwq_unbound_release_workfn+0xd0/0xd0
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
Code: 4c 8d 44 24 0d b9 00 05 00 00 48 89 ef ba 09 00 00 00 be 01 00 00 00 e8 e1 09 f8 ff 85 c0 0f 85 b2 01 00 00 80 7c 24 0c 03 74 02 <0f> 0b 48 89 ef e8 b8 07 f8 ff f6 05 51 1b c8 ff 02 0f 84 72 ff
---[ end trace 55d811b38fc8e71a ]---
So, to fix this we attempt to grab a runtime PM reference in the ACPI
handler itself asynchronously. If the GPU is already awake (it will have
normal hotplugging at this point) or runtime PM callbacks are currently
disabled on the device, we drop our reference without updating the
autosuspend delay. We only schedule connector reprobes when we
successfully managed to queue up a resume request with our asynchronous
PM ref.
This also has the added benefit of preventing redundant connector
reprobes from ACPI while the GPU is runtime resumed!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <kherbst@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1477182#c41
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nouveau_display.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -377,15 +377,29 @@ nouveau_display_acpi_ntfy(struct notifie
{
struct nouveau_drm *drm = container_of(nb, typeof(*drm), acpi_nb);
struct acpi_bus_event *info = data;
+ int ret;
if (!strcmp(info->device_class, ACPI_VIDEO_CLASS)) {
if (info->type == ACPI_VIDEO_NOTIFY_PROBE) {
- /*
- * This may be the only indication we receive of a
- * connector hotplug on a runtime suspended GPU,
- * schedule hpd_work to check.
- */
- schedule_work(&drm->hpd_work);
+ ret = pm_runtime_get(drm->dev->dev);
+ if (ret == 1 || ret == -EACCES) {
+ /* If the GPU is already awake, or in a state
+ * where we can't wake it up, it can handle
+ * it's own hotplug events.
+ */
+ pm_runtime_put_autosuspend(drm->dev->dev);
+ } else if (ret == 0) {
+ /* This may be the only indication we receive
+ * of a connector hotplug on a runtime
+ * suspended GPU, schedule hpd_work to check.
+ */
+ NV_DEBUG(drm, "ACPI requested connector reprobe\n");
+ schedule_work(&drm->hpd_work);
+ pm_runtime_put_noidle(drm->dev->dev);
+ } else {
+ NV_WARN(drm, "Dropped ACPI reprobe event due to RPM error: %d\n",
+ ret);
+ }
/* acpi-video should not generate keypresses for this */
return NOTIFY_BAD;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 71/88] drm/vc4: Fix the "no scaling" case on multi-planar YUV formats
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 70/88] drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 72/88] drm: udl: Destroy framebuffer only if it was initialized Greg Kroah-Hartman
` (20 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Boris Brezillon, Eric Anholt, Sean Paul
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Brezillon <boris.brezillon@bootlin.com>
commit 658d8cbd07dae22ccecf49399e18c609c4e85c53 upstream.
When there's no scaling requested ->is_unity should be true no matter
the format.
Also, when no scaling is requested and we have a multi-planar YUV
format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only
set ->x_scaling[0] to VC4_SCALING_PPF.
Doing this fixes an hardly visible artifact (seen when using modetest
and a rather big overlay plane in YUV420).
Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/vc4/vc4_plane.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -297,6 +297,9 @@ static int vc4_plane_setup_clipping_and_
vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
vc4_state->crtc_h);
+ vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
+ vc4_state->y_scaling[0] == VC4_SCALING_NONE);
+
if (num_planes > 1) {
vc4_state->is_yuv = true;
@@ -312,24 +315,17 @@ static int vc4_plane_setup_clipping_and_
vc4_get_scaling_mode(vc4_state->src_h[1],
vc4_state->crtc_h);
- /* YUV conversion requires that scaling be enabled,
- * even on a plane that's otherwise 1:1. Choose TPZ
- * for simplicity.
+ /* YUV conversion requires that horizontal scaling be enabled,
+ * even on a plane that's otherwise 1:1. Looks like only PPF
+ * works in that case, so let's pick that one.
*/
- if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
- vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
- if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
- vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
+ if (vc4_state->is_unity)
+ vc4_state->x_scaling[0] = VC4_SCALING_PPF;
} else {
vc4_state->x_scaling[1] = VC4_SCALING_NONE;
vc4_state->y_scaling[1] = VC4_SCALING_NONE;
}
- vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
- vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
- vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
- vc4_state->y_scaling[1] == VC4_SCALING_NONE);
-
/* No configuring scaling on the cursor plane, since it gets
non-vblank-synced updates, and scaling requires requires
LBM changes which have to be vblank-synced.
@@ -621,7 +617,10 @@ static int vc4_plane_mode_set(struct drm
vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
}
- if (!vc4_state->is_unity) {
+ if (vc4_state->x_scaling[0] != VC4_SCALING_NONE ||
+ vc4_state->x_scaling[1] != VC4_SCALING_NONE ||
+ vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
+ vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
/* LBM Base Address. */
if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 72/88] drm: udl: Destroy framebuffer only if it was initialized
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 71/88] drm/vc4: Fix the "no scaling" case on multi-planar YUV formats Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 73/88] drm/amdgpu: add new polaris pci id Greg Kroah-Hartman
` (19 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Paul, Daniel Vetter, Emil Lundmark
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emil Lundmark <lndmrk@chromium.org>
commit fcb74da1eb8edd3a4ef9b9724f88ed709d684227 upstream.
This fixes a NULL pointer dereference that can happen if the UDL
driver is unloaded before the framebuffer is initialized. This can
happen e.g. if the USB device is unplugged right after it was plugged
in.
As explained by Stéphane Marchesin:
It happens when fbdev is disabled (which is the case for Chrome OS).
Even though intialization of the fbdev part is optional (it's done in
udlfb_create which is the callback for fb_probe()), the teardown isn't
optional (udl_driver_unload -> udl_fbdev_cleanup ->
udl_fbdev_destroy).
Note that udl_fbdev_cleanup *tries* to be conditional (you can see it
does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is
always set during udl_fbdev_init.
Cc: stable@vger.kernel.org
Suggested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/udl/udl_fb.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/udl/udl_fb.c
+++ b/drivers/gpu/drm/udl/udl_fb.c
@@ -432,9 +432,11 @@ static void udl_fbdev_destroy(struct drm
{
drm_fb_helper_unregister_fbi(&ufbdev->helper);
drm_fb_helper_fini(&ufbdev->helper);
- drm_framebuffer_unregister_private(&ufbdev->ufb.base);
- drm_framebuffer_cleanup(&ufbdev->ufb.base);
- drm_gem_object_put_unlocked(&ufbdev->ufb.obj->base);
+ if (ufbdev->ufb.obj) {
+ drm_framebuffer_unregister_private(&ufbdev->ufb.base);
+ drm_framebuffer_cleanup(&ufbdev->ufb.base);
+ drm_gem_object_put_unlocked(&ufbdev->ufb.obj->base);
+ }
}
int udl_fbdev_init(struct drm_device *dev)
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 73/88] drm/amdgpu: add new polaris pci id
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 72/88] drm: udl: Destroy framebuffer only if it was initialized Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation Greg Kroah-Hartman
` (18 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Rex Zhu, Alex Deucher
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit 30f3984ede683b98a4e8096e200df78bf0609b4f upstream.
Add new pci id.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 14 ++++++++------
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 +
2 files changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c
@@ -367,12 +367,14 @@ static int amdgpu_cgs_get_firmware_info(
break;
case CHIP_POLARIS10:
if (type == CGS_UCODE_ID_SMU) {
- if ((adev->pdev->device == 0x67df) &&
- ((adev->pdev->revision == 0xe0) ||
- (adev->pdev->revision == 0xe3) ||
- (adev->pdev->revision == 0xe4) ||
- (adev->pdev->revision == 0xe5) ||
- (adev->pdev->revision == 0xe7) ||
+ if (((adev->pdev->device == 0x67df) &&
+ ((adev->pdev->revision == 0xe0) ||
+ (adev->pdev->revision == 0xe3) ||
+ (adev->pdev->revision == 0xe4) ||
+ (adev->pdev->revision == 0xe5) ||
+ (adev->pdev->revision == 0xe7) ||
+ (adev->pdev->revision == 0xef))) ||
+ ((adev->pdev->device == 0x6fdf) &&
(adev->pdev->revision == 0xef))) {
info->is_kicker = true;
strcpy(fw_name, "amdgpu/polaris10_k_smc.bin");
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -532,6 +532,7 @@ static const struct pci_device_id pciidl
{0x1002, 0x67CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10},
{0x1002, 0x67CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10},
{0x1002, 0x67CF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10},
+ {0x1002, 0x6FDF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10},
/* Polaris12 */
{0x1002, 0x6980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12},
{0x1002, 0x6981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12},
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 73/88] drm/amdgpu: add new polaris pci id Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 10:43 ` Holger Hoffstätte
2018-09-27 9:03 ` [PATCH 4.18 75/88] tty: vt_ioctl: fix potential Spectre v1 Greg Kroah-Hartman
` (17 subsequent siblings)
91 siblings, 1 reply; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lyude Paul, Daniel Vetter, Sean Paul
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lyude Paul <lyude@redhat.com>
commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
As pointed out by Daniel Vetter, we should be usinng
drm_drv_uses_atomic_modeset() for determining whether or not we want to
make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
the former isn't an accurate representation of whether or not the driver
is actually using atomic modesetting internally (even though it might
not be exposing atomic capabilities).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_atomic.c | 2 +-
drivers/gpu/drm/drm_debugfs.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1838,7 +1838,7 @@ static void __drm_state_dump(struct drm_
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
- if (!drm_core_check_feature(dev, DRIVER_ATOMIC))
+ if (!drm_drv_uses_atomic_modeset(dev))
return;
list_for_each_entry(plane, &config->plane_list, head) {
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -150,7 +150,7 @@ int drm_debugfs_init(struct drm_minor *m
return ret;
}
- if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
+ if (drm_drv_uses_atomic_modeset(dev)) {
ret = drm_atomic_debugfs_init(minor);
if (ret) {
DRM_ERROR("Failed to create atomic debugfs files\n");
^ permalink raw reply [flat|nested] 103+ messages in thread* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 9:03 ` [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation Greg Kroah-Hartman
@ 2018-09-27 10:43 ` Holger Hoffstätte
2018-09-27 12:37 ` Greg Kroah-Hartman
0 siblings, 1 reply; 103+ messages in thread
From: Holger Hoffstätte @ 2018-09-27 10:43 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Lyude Paul, Daniel Vetter, Sean Paul
On 09/27/18 11:03, Greg Kroah-Hartman wrote:
> 4.18-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Lyude Paul <lyude@redhat.com>
>
> commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
>
> As pointed out by Daniel Vetter, we should be usinng
> drm_drv_uses_atomic_modeset() for determining whether or not we want to
> make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
> the former isn't an accurate representation of whether or not the driver
> is actually using atomic modesetting internally (even though it might
> not be exposing atomic capabilities).
>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: stable@vger.kernel.org
> Reviewed-by: Sean Paul <seanpaul@chromium.org>
> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch breaks switching the console to high resolution during boot on my
workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
fixes the problem:
Sep 27 12:21:49 ragnarok kernel: [drm] radeon kernel modesetting enabled.
Sep 27 12:21:49 ragnarok kernel: checking generic (e0000000 500000) vs hw (e0000000 10000000)
Sep 27 12:21:49 ragnarok kernel: fb: switching to radeondrmfb from VESA VGA
Sep 27 12:21:49 ragnarok kernel: Console: switching to colour dummy device 80x25
Sep 27 12:21:49 ragnarok kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
Sep 27 12:21:49 ragnarok kernel: PGD 0 P4D 0
Sep 27 12:21:49 ragnarok kernel: Oops: 0000 [#1] SMP
Sep 27 12:21:49 ragnarok kernel: CPU: 2 PID: 2157 Comm: systemd-udevd Not tainted 4.18.11 #1
Sep 27 12:21:49 ragnarok kernel: Hardware name: Gigabyte Technology Co., Ltd. P67-DS3-B3/P67-DS3-B3, BIOS F1 05/06/2011
Sep 27 12:21:49 ragnarok kernel: RIP: 0010:drm_debugfs_init+0xa6/0x1b0 [drm]
Sep 27 12:21:49 ragnarok kernel: Code: 00 48 89 d9 48 89 c2 be 03 00 00 00 48 c7 c7 40 9d 15 a0 e8 8c fb ff ff 89 c5 85 c0 0f 85 84 00 00 00 49 8b 84 24 90 03 00 00 <48> 83 78 28 00 74 10 48 89 df e8 fb 06 ff ff 85 c0 0f 85 92 00 00
Sep 27 12:21:49 ragnarok kernel: RSP: 0018:ffffc900020dfaa0 EFLAGS: 00010246
Sep 27 12:21:49 ragnarok kernel: RAX: 0000000000000000 RBX: ffff8805fdbe64e0 RCX: 0000000000000000
Sep 27 12:21:49 ragnarok kernel: RDX: ffff8806033fe780 RSI: 0000000000000100 RDI: ffff8805fdbe6510
Sep 27 12:21:49 ragnarok kernel: RBP: 0000000000000000 R08: ffff880600d87c38 R09: 0000000000000000
Sep 27 12:21:49 ragnarok kernel: R10: ffffc900020dfa20 R11: ffffc900020dfaab R12: ffff8806000ee800
Sep 27 12:21:49 ragnarok kernel: R13: 0000000000000080 R14: 0000000000000000 R15: ffff8805fdbe6408
Sep 27 12:21:49 ragnarok kernel: FS: 00007fc81fb3c800(0000) GS:ffff88061f480000(0000) knlGS:0000000000000000
Sep 27 12:21:49 ragnarok kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 27 12:21:49 ragnarok kernel: CR2: 0000000000000028 CR3: 00000006003bf002 CR4: 00000000000606e0
Sep 27 12:21:49 ragnarok kernel: Call Trace:
Sep 27 12:21:49 ragnarok kernel: ? pci_conf1_read+0xa4/0x100
Sep 27 12:21:49 ragnarok kernel: ? pci_bus_read_config_word+0x43/0x70
Sep 27 12:21:49 ragnarok kernel: drm_minor_register+0x4c/0xe0 [drm]
Sep 27 12:21:49 ragnarok kernel: drm_dev_register+0x32/0x140 [drm]
Sep 27 12:21:49 ragnarok kernel: drm_get_pci_dev+0x90/0x170 [drm]
Sep 27 12:21:49 ragnarok kernel: pci_device_probe+0xc8/0x140
Sep 27 12:21:49 ragnarok kernel: driver_probe_device+0x21e/0x2d0
Sep 27 12:21:49 ragnarok kernel: __driver_attach+0xb1/0xd0
Sep 27 12:21:49 ragnarok kernel: ? driver_probe_device+0x2d0/0x2d0
Sep 27 12:21:49 ragnarok kernel: bus_for_each_dev+0x73/0xb0
Sep 27 12:21:49 ragnarok kernel: bus_add_driver+0x19c/0x1e0
Sep 27 12:21:49 ragnarok kernel: ? 0xffffffffa02b3000
Sep 27 12:21:49 ragnarok kernel: driver_register+0x6b/0xb0
Sep 27 12:21:49 ragnarok kernel: ? 0xffffffffa02b3000
Sep 27 12:21:49 ragnarok kernel: do_one_initcall+0x43/0x1af
Sep 27 12:21:49 ragnarok kernel: ? _cond_resched+0x15/0x30
Sep 27 12:21:49 ragnarok kernel: ? kmem_cache_alloc_trace+0x15c/0x1c0
Sep 27 12:21:49 ragnarok kernel: do_init_module+0x5a/0x210
Sep 27 12:21:49 ragnarok kernel: load_module+0x2149/0x2660
Sep 27 12:21:49 ragnarok kernel: ? xfs_file_read_iter+0x64/0xc0
Sep 27 12:21:49 ragnarok kernel: ? __se_sys_finit_module+0xb1/0xd0
Sep 27 12:21:49 ragnarok kernel: __se_sys_finit_module+0xb1/0xd0
Sep 27 12:21:49 ragnarok kernel: do_syscall_64+0x3e/0xe0
Sep 27 12:21:49 ragnarok kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Sep 27 12:21:49 ragnarok kernel: RIP: 0033:0x7fc81e999cc9
Sep 27 12:21:49 ragnarok kernel: Code: 00 00 00 75 05 48 83 c4 18 c3 e8 92 98 01 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 91 2c 00 f7 d8 64 89 01 48
Sep 27 12:21:49 ragnarok kernel: RSP: 002b:00007ffe7ab81f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
Sep 27 12:21:49 ragnarok kernel: RAX: ffffffffffffffda RBX: 0000556a340e2ae0 RCX: 00007fc81e999cc9
Sep 27 12:21:49 ragnarok kernel: RDX: 0000000000000000 RSI: 00007fc81f75211d RDI: 0000000000000017
Sep 27 12:21:49 ragnarok kernel: RBP: 00007fc81f75211d R08: 0000000000000000 R09: 00007ffe7ab82070
Sep 27 12:21:49 ragnarok kernel: R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000
Sep 27 12:21:49 ragnarok kernel: R13: 0000556a340ebdf0 R14: 0000000000020000 R15: 000000000aba9500
Sep 27 12:21:49 ragnarok kernel: Modules linked in: videobuf2_vmalloc x86_pkg_temp_thermal videobuf2_memops videobuf2_v4l2 snd_hwdep coretemp snd_usbmidi_lib videodev snd_rawmidi radeon(+) kvm_intel videobuf2_common snd_seq_device usbhid(+) i2c_algo_bit kvm drm_kms_helper snd_hda_codec_realtek irqbypass syscopyarea snd_hda_codec_generic sysfillrect snd_hda_codec_hdmi sysimgblt pcbc fb_sys_fops mq_deadline aesni_intel snd_hda_intel ttm aes_x86_64 crypto_simd cryptd glue_helper snd_hda_codec drm snd_hda_core i2c_i801 snd_pcm drm_panel_orientation_quirks i2c_core snd_timer parport_pc backlight snd r8169 soundcore mii parport
Sep 27 12:21:49 ragnarok kernel: CR2: 0000000000000028
Sep 27 12:21:49 ragnarok kernel: ---[ end trace 2f2cb8be562d405e ]---
Sep 27 12:21:49 ragnarok kernel: RIP: 0010:drm_debugfs_init+0xa6/0x1b0 [drm]
Sep 27 12:21:49 ragnarok kernel: Code: 00 48 89 d9 48 89 c2 be 03 00 00 00 48 c7 c7 40 9d 15 a0 e8 8c fb ff ff 89 c5 85 c0 0f 85 84 00 00 00 49 8b 84 24 90 03 00 00 <48> 83 78 28 00 74 10 48 89 df e8 fb 06 ff ff 85 c0 0f 85 92 00 00
Sep 27 12:21:49 ragnarok kernel: RSP: 0018:ffffc900020dfaa0 EFLAGS: 00010246
Sep 27 12:21:49 ragnarok kernel: RAX: 0000000000000000 RBX: ffff8805fdbe64e0 RCX: 0000000000000000
Sep 27 12:21:49 ragnarok kernel: RDX: ffff8806033fe780 RSI: 0000000000000100 RDI: ffff8805fdbe6510
Sep 27 12:21:49 ragnarok kernel: RBP: 0000000000000000 R08: ffff880600d87c38 R09: 0000000000000000
Sep 27 12:21:49 ragnarok kernel: R10: ffffc900020dfa20 R11: ffffc900020dfaab R12: ffff8806000ee800
Sep 27 12:21:49 ragnarok kernel: R13: 0000000000000080 R14: 0000000000000000 R15: ffff8805fdbe6408
Sep 27 12:21:49 ragnarok kernel: FS: 00007fc81fb3c800(0000) GS:ffff88061f480000(0000) knlGS:0000000000000000
Sep 27 12:21:49 ragnarok kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 27 12:21:49 ragnarok kernel: CR2: 0000000000000028 CR3: 00000006003bf002 CR4: 00000000000606e0
Sep 27 12:21:49 ragnarok kernel: it87: Found IT8728F chip at 0x290, revision 1
Full logs available on request.
cheers,
Holger
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 10:43 ` Holger Hoffstätte
@ 2018-09-27 12:37 ` Greg Kroah-Hartman
2018-09-27 13:26 ` Holger Hoffstätte
0 siblings, 1 reply; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 12:37 UTC (permalink / raw)
To: Holger Hoffstätte
Cc: linux-kernel, stable, Lyude Paul, Daniel Vetter, Sean Paul
On Thu, Sep 27, 2018 at 12:43:33PM +0200, Holger Hoffstätte wrote:
> On 09/27/18 11:03, Greg Kroah-Hartman wrote:
> > 4.18-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Lyude Paul <lyude@redhat.com>
> >
> > commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
> >
> > As pointed out by Daniel Vetter, we should be usinng
> > drm_drv_uses_atomic_modeset() for determining whether or not we want to
> > make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
> > the former isn't an accurate representation of whether or not the driver
> > is actually using atomic modesetting internally (even though it might
> > not be exposing atomic capabilities).
> >
> > Signed-off-by: Lyude Paul <lyude@redhat.com>
> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Cc: stable@vger.kernel.org
> > Reviewed-by: Sean Paul <seanpaul@chromium.org>
> > Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> This patch breaks switching the console to high resolution during boot on my
> workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
> fixes the problem:
Is 4.19-rc5 also a problem?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 12:37 ` Greg Kroah-Hartman
@ 2018-09-27 13:26 ` Holger Hoffstätte
2018-09-27 13:53 ` Holger Hoffstätte
2018-09-27 19:00 ` Greg Kroah-Hartman
0 siblings, 2 replies; 103+ messages in thread
From: Holger Hoffstätte @ 2018-09-27 13:26 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Lyude Paul, Daniel Vetter, Sean Paul
On 09/27/18 14:37, Greg Kroah-Hartman wrote:
> On Thu, Sep 27, 2018 at 12:43:33PM +0200, Holger Hoffstätte wrote:
>> On 09/27/18 11:03, Greg Kroah-Hartman wrote:
>>> 4.18-stable review patch. If anyone has any objections, please let me know.
>>>
>>> ------------------
>>>
>>> From: Lyude Paul <lyude@redhat.com>
>>>
>>> commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
>>>
>>> As pointed out by Daniel Vetter, we should be usinng
>>> drm_drv_uses_atomic_modeset() for determining whether or not we want to
>>> make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
>>> the former isn't an accurate representation of whether or not the driver
>>> is actually using atomic modesetting internally (even though it might
>>> not be exposing atomic capabilities).
>>>
>>> Signed-off-by: Lyude Paul <lyude@redhat.com>
>>> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
>>> Cc: stable@vger.kernel.org
>>> Reviewed-by: Sean Paul <seanpaul@chromium.org>
>>> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>
>> This patch breaks switching the console to high resolution during boot on my
>> workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
>> fixes the problem:
>
> Is 4.19-rc5 also a problem?
>
No, 4.19-rc5 with the same config works fine and properly switches the
console during boot.
Interestingly another machine with i915 chip seemed to work fine with this
patch included (rebooted that one first), so it might well be related to
different motherboard/chipset or the Radeon card (an admittedly old, but
otherwise completely functional fanless r600).
I'll try to find more clues, but for now that's all I got.
Holger
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 13:26 ` Holger Hoffstätte
@ 2018-09-27 13:53 ` Holger Hoffstätte
2018-09-27 14:05 ` Sean Paul
2018-09-27 19:00 ` Greg Kroah-Hartman
1 sibling, 1 reply; 103+ messages in thread
From: Holger Hoffstätte @ 2018-09-27 13:53 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Lyude Paul, Daniel Vetter, Sean Paul
On 09/27/18 15:26, Holger Hoffstätte wrote:
> On 09/27/18 14:37, Greg Kroah-Hartman wrote:
>> On Thu, Sep 27, 2018 at 12:43:33PM +0200, Holger Hoffstätte wrote:
>>> On 09/27/18 11:03, Greg Kroah-Hartman wrote:
>>>> 4.18-stable review patch. If anyone has any objections, please let me know.
>>>>
>>>> ------------------
>>>>
>>>> From: Lyude Paul <lyude@redhat.com>
>>>>
>>>> commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
>>>>
>>>> As pointed out by Daniel Vetter, we should be usinng
>>>> drm_drv_uses_atomic_modeset() for determining whether or not we want to
>>>> make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
>>>> the former isn't an accurate representation of whether or not the driver
>>>> is actually using atomic modesetting internally (even though it might
>>>> not be exposing atomic capabilities).
>>>>
>>>> Signed-off-by: Lyude Paul <lyude@redhat.com>
>>>> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
>>>> Cc: stable@vger.kernel.org
>>>> Reviewed-by: Sean Paul <seanpaul@chromium.org>
>>>> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
>>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>>
>>> This patch breaks switching the console to high resolution during boot on my
>>> workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
>>> fixes the problem:
>>
>> Is 4.19-rc5 also a problem?
>>
>
> No, 4.19-rc5 with the same config works fine and properly switches the
> console during boot.
>
> Interestingly another machine with i915 chip seemed to work fine with this
> patch included (rebooted that one first), so it might well be related to
> different motherboard/chipset or the Radeon card (an admittedly old, but
> otherwise completely functional fanless r600).
>
> I'll try to find more clues, but for now that's all I got.
Looking at mainline include/drm I see several recent movements and cleanups
related to drm_drv_uses_atomic_modeset(), moving it out of drmP.h and into
drm, changes to atomic modesetting and such, all part of the 4.19 merge
window. I'm reasonably sure some relatred changes went missing here wrt.
this patch.
-h
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 13:53 ` Holger Hoffstätte
@ 2018-09-27 14:05 ` Sean Paul
2018-09-27 14:18 ` Holger Hoffstätte
0 siblings, 1 reply; 103+ messages in thread
From: Sean Paul @ 2018-09-27 14:05 UTC (permalink / raw)
To: Holger Hoffstätte
Cc: Greg Kroah-Hartman, linux-kernel, stable, Lyude Paul,
Daniel Vetter, Sean Paul
On Thu, Sep 27, 2018 at 03:53:26PM +0200, Holger Hoffstätte wrote:
> On 09/27/18 15:26, Holger Hoffstätte wrote:
> > On 09/27/18 14:37, Greg Kroah-Hartman wrote:
> > > On Thu, Sep 27, 2018 at 12:43:33PM +0200, Holger Hoffstätte wrote:
> > > > On 09/27/18 11:03, Greg Kroah-Hartman wrote:
> > > > > 4.18-stable review patch. If anyone has any objections, please let me know.
> > > > >
> > > > > ------------------
> > > > >
> > > > > From: Lyude Paul <lyude@redhat.com>
> > > > >
> > > > > commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
> > > > >
> > > > > As pointed out by Daniel Vetter, we should be usinng
> > > > > drm_drv_uses_atomic_modeset() for determining whether or not we want to
> > > > > make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
> > > > > the former isn't an accurate representation of whether or not the driver
> > > > > is actually using atomic modesetting internally (even though it might
> > > > > not be exposing atomic capabilities).
> > > > >
> > > > > Signed-off-by: Lyude Paul <lyude@redhat.com>
> > > > > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > > > Cc: stable@vger.kernel.org
> > > > > Reviewed-by: Sean Paul <seanpaul@chromium.org>
> > > > > Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
> > > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > >
> > > > This patch breaks switching the console to high resolution during boot on my
> > > > workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
> > > > fixes the problem:
> > >
> > > Is 4.19-rc5 also a problem?
> > >
> >
> > No, 4.19-rc5 with the same config works fine and properly switches the
> > console during boot.
> >
> > Interestingly another machine with i915 chip seemed to work fine with this
> > patch included (rebooted that one first), so it might well be related to
> > different motherboard/chipset or the Radeon card (an admittedly old, but
> > otherwise completely functional fanless r600).
> >
> > I'll try to find more clues, but for now that's all I got.
>
> Looking at mainline include/drm I see several recent movements and cleanups
> related to drm_drv_uses_atomic_modeset(), moving it out of drmP.h and into
> drm, changes to atomic modesetting and such, all part of the 4.19 merge
> window. I'm reasonably sure some relatred changes went missing here wrt.
> this patch.
Hey all,
Thanks for testing, Holger.
This was fixed with https://patchwork.freedesktop.org/patch/250350/ which is not
Cc stable.
I think it'd be best to just drop the initial patch from stable, it
doesn't need to go back afaict.
Sean
>
> -h
--
Sean Paul, Software Engineer, Google / Chromium OS
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 14:05 ` Sean Paul
@ 2018-09-27 14:18 ` Holger Hoffstätte
0 siblings, 0 replies; 103+ messages in thread
From: Holger Hoffstätte @ 2018-09-27 14:18 UTC (permalink / raw)
To: Sean Paul
Cc: Greg Kroah-Hartman, linux-kernel, stable, Lyude Paul,
Daniel Vetter, Sean Paul
On 09/27/18 16:05, Sean Paul wrote:
> On Thu, Sep 27, 2018 at 03:53:26PM +0200, Holger Hoffstätte wrote:
>> On 09/27/18 15:26, Holger Hoffstätte wrote:
>>> On 09/27/18 14:37, Greg Kroah-Hartman wrote:
>>>> On Thu, Sep 27, 2018 at 12:43:33PM +0200, Holger Hoffstätte wrote:
>>>>> On 09/27/18 11:03, Greg Kroah-Hartman wrote:
>>>>>> 4.18-stable review patch. If anyone has any objections, please let me know.
>>>>>>
>>>>>> ------------------
>>>>>>
>>>>>> From: Lyude Paul <lyude@redhat.com>
>>>>>>
>>>>>> commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
>>>>>>
>>>>>> As pointed out by Daniel Vetter, we should be usinng
>>>>>> drm_drv_uses_atomic_modeset() for determining whether or not we want to
>>>>>> make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
>>>>>> the former isn't an accurate representation of whether or not the driver
>>>>>> is actually using atomic modesetting internally (even though it might
>>>>>> not be exposing atomic capabilities).
>>>>>>
>>>>>> Signed-off-by: Lyude Paul <lyude@redhat.com>
>>>>>> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
>>>>>> Cc: stable@vger.kernel.org
>>>>>> Reviewed-by: Sean Paul <seanpaul@chromium.org>
>>>>>> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
>>>>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>>>>
>>>>> This patch breaks switching the console to high resolution during boot on my
>>>>> workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
>>>>> fixes the problem:
>>>>
>>>> Is 4.19-rc5 also a problem?
>>>>
>>>
>>> No, 4.19-rc5 with the same config works fine and properly switches the
>>> console during boot.
>>>
>>> Interestingly another machine with i915 chip seemed to work fine with this
>>> patch included (rebooted that one first), so it might well be related to
>>> different motherboard/chipset or the Radeon card (an admittedly old, but
>>> otherwise completely functional fanless r600).
>>>
>>> I'll try to find more clues, but for now that's all I got.
>>
>> Looking at mainline include/drm I see several recent movements and cleanups
>> related to drm_drv_uses_atomic_modeset(), moving it out of drmP.h and into
>> drm, changes to atomic modesetting and such, all part of the 4.19 merge
>> window. I'm reasonably sure some relatred changes went missing here wrt.
>> this patch.
>
> Hey all,
> Thanks for testing, Holger.
>
> This was fixed with https://patchwork.freedesktop.org/patch/250350/ which is not
> Cc stable.
That's what I just looked at, it's in mainline as well. I briefly considered
backporting that fix manually, but was not sure why radeon is apparently not
a "modesetting driver" and figured I'd rather wait for someone who understands
drm better than me.
> I think it'd be best to just drop the initial patch from stable, it
> doesn't need to go back afaict.
Agreed - using 4.18.11 just fine right now without it. :)
cheers,
Holger
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation
2018-09-27 13:26 ` Holger Hoffstätte
2018-09-27 13:53 ` Holger Hoffstätte
@ 2018-09-27 19:00 ` Greg Kroah-Hartman
1 sibling, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 19:00 UTC (permalink / raw)
To: Holger Hoffstätte
Cc: linux-kernel, stable, Lyude Paul, Daniel Vetter, Sean Paul
On Thu, Sep 27, 2018 at 03:26:37PM +0200, Holger Hoffstätte wrote:
> On 09/27/18 14:37, Greg Kroah-Hartman wrote:
> > On Thu, Sep 27, 2018 at 12:43:33PM +0200, Holger Hoffstätte wrote:
> > > On 09/27/18 11:03, Greg Kroah-Hartman wrote:
> > > > 4.18-stable review patch. If anyone has any objections, please let me know.
> > > >
> > > > ------------------
> > > >
> > > > From: Lyude Paul <lyude@redhat.com>
> > > >
> > > > commit 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 upstream.
> > > >
> > > > As pointed out by Daniel Vetter, we should be usinng
> > > > drm_drv_uses_atomic_modeset() for determining whether or not we want to
> > > > make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
> > > > the former isn't an accurate representation of whether or not the driver
> > > > is actually using atomic modesetting internally (even though it might
> > > > not be exposing atomic capabilities).
> > > >
> > > > Signed-off-by: Lyude Paul <lyude@redhat.com>
> > > > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > > Cc: stable@vger.kernel.org
> > > > Reviewed-by: Sean Paul <seanpaul@chromium.org>
> > > > Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
> > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > >
> > > This patch breaks switching the console to high resolution during boot on my
> > > workstation with a Radeon card; it worked fine with 4.18.10 and reverting it
> > > fixes the problem:
> >
> > Is 4.19-rc5 also a problem?
> >
>
> No, 4.19-rc5 with the same config works fine and properly switches the
> console during boot.
>
> Interestingly another machine with i915 chip seemed to work fine with this
> patch included (rebooted that one first), so it might well be related to
> different motherboard/chipset or the Radeon card (an admittedly old, but
> otherwise completely functional fanless r600).
>
> I'll try to find more clues, but for now that's all I got.
Ok, I'll go delete this, but this implies a much deeper problem with the
code here. No logic should ever change based on a debugfs file creation
failing or succeeding. The error checks here are all not needed at all.
I'll work on a patch to clean it up for future kernels...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 103+ messages in thread
* [PATCH 4.18 75/88] tty: vt_ioctl: fix potential Spectre v1
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 74/88] drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 76/88] ext4: check to make sure the rename(2)s destination is not freed Greg Kroah-Hartman
` (16 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gustavo A. R. Silva, Alan Cox
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <gustavo@embeddedor.com>
commit e97267cb4d1ee01ca0929638ec0fcbb0904f903d upstream.
vsa.console is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue
'vc_cons' [r]
Fix this by sanitizing vsa.console before using it to index vc_cons
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/vt/vt_ioctl.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -32,6 +32,8 @@
#include <asm/io.h>
#include <linux/uaccess.h>
+#include <linux/nospec.h>
+
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/kbd_diacr.h>
@@ -700,6 +702,8 @@ int vt_ioctl(struct tty_struct *tty,
if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
ret = -ENXIO;
else {
+ vsa.console = array_index_nospec(vsa.console,
+ MAX_NR_CONSOLES + 1);
vsa.console--;
console_lock();
ret = vc_allocate(vsa.console);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 76/88] ext4: check to make sure the rename(2)s destination is not freed
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 75/88] tty: vt_ioctl: fix potential Spectre v1 Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 77/88] ext4: avoid divide by zero fault when deleting corrupted inline directories Greg Kroah-Hartman
` (15 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Theodore Tso, Wen Xu
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit b50282f3241acee880514212d88b6049fb5039c8 upstream.
If the destination of the rename(2) system call exists, the inode's
link count (i_nlinks) must be non-zero. If it is, the inode can end
up on the orphan list prematurely, leading to all sorts of hilarity,
including a use-after-free.
https://bugzilla.kernel.org/show_bug.cgi?id=200931
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/namei.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3478,6 +3478,12 @@ static int ext4_rename(struct inode *old
int credits;
u8 old_file_type;
+ if (new.inode && new.inode->i_nlink == 0) {
+ EXT4_ERROR_INODE(new.inode,
+ "target of rename is already freed");
+ return -EFSCORRUPTED;
+ }
+
if ((ext4_test_inode_flag(new_dir, EXT4_INODE_PROJINHERIT)) &&
(!projid_eq(EXT4_I(new_dir)->i_projid,
EXT4_I(old_dentry->d_inode)->i_projid)))
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 77/88] ext4: avoid divide by zero fault when deleting corrupted inline directories
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 76/88] ext4: check to make sure the rename(2)s destination is not freed Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:03 ` [PATCH 4.18 78/88] ext4: avoid arithemetic overflow that can trigger a BUG Greg Kroah-Hartman
` (14 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Theodore Tso, Wen Xu
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit 4d982e25d0bdc83d8c64e66fdeca0b89240b3b85 upstream.
A specially crafted file system can trick empty_inline_dir() into
reading past the last valid entry in a inline directory, and then run
into the end of xattr marker. This will trigger a divide by zero
fault. Fix this by using the size of the inline directory instead of
dir->i_size.
Also clean up error reporting in __ext4_check_dir_entry so that the
message is clearer and more understandable --- and avoids the division
by zero trap if the size passed in is zero. (I'm not sure why we
coded it that way in the first place; printing offset % size is
actually more confusing and less useful.)
https://bugzilla.kernel.org/show_bug.cgi?id=200933
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/dir.c | 20 +++++++++-----------
fs/ext4/inline.c | 4 +++-
2 files changed, 12 insertions(+), 12 deletions(-)
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -76,7 +76,7 @@ int __ext4_check_dir_entry(const char *f
else if (unlikely(rlen < EXT4_DIR_REC_LEN(de->name_len)))
error_msg = "rec_len is too small for name_len";
else if (unlikely(((char *) de - buf) + rlen > size))
- error_msg = "directory entry across range";
+ error_msg = "directory entry overrun";
else if (unlikely(le32_to_cpu(de->inode) >
le32_to_cpu(EXT4_SB(dir->i_sb)->s_es->s_inodes_count)))
error_msg = "inode out of bounds";
@@ -85,18 +85,16 @@ int __ext4_check_dir_entry(const char *f
if (filp)
ext4_error_file(filp, function, line, bh->b_blocknr,
- "bad entry in directory: %s - offset=%u(%u), "
- "inode=%u, rec_len=%d, name_len=%d",
- error_msg, (unsigned) (offset % size),
- offset, le32_to_cpu(de->inode),
- rlen, de->name_len);
+ "bad entry in directory: %s - offset=%u, "
+ "inode=%u, rec_len=%d, name_len=%d, size=%d",
+ error_msg, offset, le32_to_cpu(de->inode),
+ rlen, de->name_len, size);
else
ext4_error_inode(dir, function, line, bh->b_blocknr,
- "bad entry in directory: %s - offset=%u(%u), "
- "inode=%u, rec_len=%d, name_len=%d",
- error_msg, (unsigned) (offset % size),
- offset, le32_to_cpu(de->inode),
- rlen, de->name_len);
+ "bad entry in directory: %s - offset=%u, "
+ "inode=%u, rec_len=%d, name_len=%d, size=%d",
+ error_msg, offset, le32_to_cpu(de->inode),
+ rlen, de->name_len, size);
return 1;
}
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1753,6 +1753,7 @@ bool empty_inline_dir(struct inode *dir,
{
int err, inline_size;
struct ext4_iloc iloc;
+ size_t inline_len;
void *inline_pos;
unsigned int offset;
struct ext4_dir_entry_2 *de;
@@ -1780,8 +1781,9 @@ bool empty_inline_dir(struct inode *dir,
goto out;
}
+ inline_len = ext4_get_inline_size(dir);
offset = EXT4_INLINE_DOTDOT_SIZE;
- while (offset < dir->i_size) {
+ while (offset < inline_len) {
de = ext4_get_inline_entry(dir, &iloc, offset,
&inline_pos, &inline_size);
if (ext4_check_dir_entry(dir, NULL, de,
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 78/88] ext4: avoid arithemetic overflow that can trigger a BUG
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 77/88] ext4: avoid divide by zero fault when deleting corrupted inline directories Greg Kroah-Hartman
@ 2018-09-27 9:03 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 79/88] ext4: recalucate superblock checksum after updating free blocks/inodes Greg Kroah-Hartman
` (13 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Theodore Tso, Wen Xu
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit bcd8e91f98c156f4b1ebcfacae675f9cfd962441 upstream.
A maliciously crafted file system can cause an overflow when the
results of a 64-bit calculation is stored into a 32-bit length
parameter.
https://bugzilla.kernel.org/show_bug.cgi?id=200623
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/ext4.h | 3 +++
fs/ext4/inode.c | 8 ++++++--
2 files changed, 9 insertions(+), 2 deletions(-)
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -675,6 +675,9 @@ enum {
/* Max physical block we can address w/o extents */
#define EXT4_MAX_BLOCK_FILE_PHYS 0xFFFFFFFF
+/* Max logical block we can support */
+#define EXT4_MAX_LOGICAL_BLOCK 0xFFFFFFFF
+
/*
* Structure of an inode on the disk
*/
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3412,12 +3412,16 @@ static int ext4_iomap_begin(struct inode
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
unsigned int blkbits = inode->i_blkbits;
- unsigned long first_block = offset >> blkbits;
- unsigned long last_block = (offset + length - 1) >> blkbits;
+ unsigned long first_block, last_block;
struct ext4_map_blocks map;
bool delalloc = false;
int ret;
+ if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK)
+ return -EINVAL;
+ first_block = offset >> blkbits;
+ last_block = min_t(loff_t, (offset + length - 1) >> blkbits,
+ EXT4_MAX_LOGICAL_BLOCK);
if (flags & IOMAP_REPORT) {
if (ext4_has_inline_data(inode)) {
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 79/88] ext4: recalucate superblock checksum after updating free blocks/inodes
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2018-09-27 9:03 ` [PATCH 4.18 78/88] ext4: avoid arithemetic overflow that can trigger a BUG Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 80/88] ext4: fix online resizes handling of a too-small final block group Greg Kroah-Hartman
` (12 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chengguang Xu, Theodore Tso
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit 4274f516d4bc50648a4d97e4f67ecbd7b65cde4a upstream.
When mounting the superblock, ext4_fill_super() calculates the free
blocks and free inodes and stores them in the superblock. It's not
strictly necessary, since we don't use them any more, but it's nice to
keep them roughly aligned to reality.
Since it's not critical for file system correctness, the code doesn't
call ext4_commit_super(). The problem is that it's in
ext4_commit_super() that we recalculate the superblock checksum. So
if we're not going to call ext4_commit_super(), we need to call
ext4_superblock_csum_set() to make sure the superblock checksum is
consistent.
Most of the time, this doesn't matter, since we end up calling
ext4_commit_super() very soon thereafter, and definitely by the time
the file system is unmounted. However, it doesn't work in this
sequence:
mke2fs -Fq -t ext4 /dev/vdc 128M
mount /dev/vdc /vdc
cp xfstests/git-versions /vdc
godown /vdc
umount /vdc
mount /dev/vdc
tune2fs -l /dev/vdc
With this commit, the "tune2fs -l" no longer fails.
Reported-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/super.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4357,11 +4357,13 @@ no_journal:
block = ext4_count_free_clusters(sb);
ext4_free_blocks_count_set(sbi->s_es,
EXT4_C2B(sbi, block));
+ ext4_superblock_csum_set(sb);
err = percpu_counter_init(&sbi->s_freeclusters_counter, block,
GFP_KERNEL);
if (!err) {
unsigned long freei = ext4_count_free_inodes(sb);
sbi->s_es->s_free_inodes_count = cpu_to_le32(freei);
+ ext4_superblock_csum_set(sb);
err = percpu_counter_init(&sbi->s_freeinodes_counter, freei,
GFP_KERNEL);
}
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 80/88] ext4: fix online resizes handling of a too-small final block group
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 79/88] ext4: recalucate superblock checksum after updating free blocks/inodes Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 81/88] ext4: fix online resizing for bigalloc file systems with a 1k block size Greg Kroah-Hartman
` (11 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Torsten Hilbrich, Theodore Tso
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit f0a459dec5495a3580f8d784555e6f8f3bf7f263 upstream.
Avoid growing the file system to an extent so that the last block
group is too small to hold all of the metadata that must be stored in
the block group.
This problem can be triggered with the following reproducer:
umount /mnt
mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \
-E resize=1073741824 /tmp/foo.img 128M
mount /tmp/foo.img /mnt
truncate --size 1708M /tmp/foo.img
resize2fs /dev/loop0 295400
umount /mnt
e2fsck -fy /tmp/foo.img
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/resize.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1986,6 +1986,26 @@ retry:
}
}
+ /*
+ * Make sure the last group has enough space so that it's
+ * guaranteed to have enough space for all metadata blocks
+ * that it might need to hold. (We might not need to store
+ * the inode table blocks in the last block group, but there
+ * will be cases where this might be needed.)
+ */
+ if ((ext4_group_first_block_no(sb, n_group) +
+ ext4_group_overhead_blocks(sb, n_group) + 2 +
+ sbi->s_itb_per_group + sbi->s_cluster_ratio) >= n_blocks_count) {
+ n_blocks_count = ext4_group_first_block_no(sb, n_group);
+ n_group--;
+ n_blocks_count_retry = 0;
+ if (resize_inode) {
+ iput(resize_inode);
+ resize_inode = NULL;
+ }
+ goto retry;
+ }
+
/* extend the last group */
if (n_group == o_group)
add = n_blocks_count - o_blocks_count;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 81/88] ext4: fix online resizing for bigalloc file systems with a 1k block size
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 80/88] ext4: fix online resizes handling of a too-small final block group Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 82/88] ext4: dont mark mmp buffer head dirty Greg Kroah-Hartman
` (10 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Theodore Tso
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit 5f8c10936fab2b69a487400f2872902e597dd320 upstream.
An online resize of a file system with the bigalloc feature enabled
and a 1k block size would be refused since ext4_resize_begin() did not
understand s_first_data_block is 0 for all bigalloc file systems, even
when the block size is 1k.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/resize.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -19,6 +19,7 @@
int ext4_resize_begin(struct super_block *sb)
{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
int ret = 0;
if (!capable(CAP_SYS_RESOURCE))
@@ -29,7 +30,7 @@ int ext4_resize_begin(struct super_block
* because the user tools have no way of handling this. Probably a
* bad time to do it anyways.
*/
- if (EXT4_SB(sb)->s_sbh->b_blocknr !=
+ if (EXT4_B2C(sbi, sbi->s_sbh->b_blocknr) !=
le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
ext4_warning(sb, "won't resize using backup superblock at %llu",
(unsigned long long)EXT4_SB(sb)->s_sbh->b_blocknr);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 82/88] ext4: dont mark mmp buffer head dirty
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (80 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 81/88] ext4: fix online resizing for bigalloc file systems with a 1k block size Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 83/88] ext4: show test_dummy_encryption mount option in /proc/mounts Greg Kroah-Hartman
` (9 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Li Dongyang, Theodore Tso, Andreas Dilger
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Dongyang <dongyangli@ddn.com>
commit fe18d649891d813964d3aaeebad873f281627fbc upstream.
Marking mmp bh dirty before writing it will make writeback
pick up mmp block later and submit a write, we don't want the
duplicate write as kmmpd thread should have full control of
reading and writing the mmp block.
Another reason is we will also have random I/O error on
the writeback request when blk integrity is enabled, because
kmmpd could modify the content of the mmp block(e.g. setting
new seq and time) while the mmp block is under I/O requested
by writeback.
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/mmp.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/ext4/mmp.c
+++ b/fs/ext4/mmp.c
@@ -49,7 +49,6 @@ static int write_mmp_block(struct super_
*/
sb_start_write(sb);
ext4_mmp_csum_set(sb, mmp);
- mark_buffer_dirty(bh);
lock_buffer(bh);
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 83/88] ext4: show test_dummy_encryption mount option in /proc/mounts
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (81 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 82/88] ext4: dont mark mmp buffer head dirty Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 84/88] ext4, dax: add ext4_bmap to ext4_dax_aops Greg Kroah-Hartman
` (8 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Biggers, Theodore Tso
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <ebiggers@google.com>
commit 338affb548c243d2af25b1ca628e67819350de6b upstream.
When in effect, add "test_dummy_encryption" to _ext4_show_options() so
that it is shown in /proc/mounts and other relevant procfs files.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/super.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2126,6 +2126,8 @@ static int _ext4_show_options(struct seq
SEQ_OPTS_PRINT("max_dir_size_kb=%u", sbi->s_max_dir_size_kb);
if (test_opt(sb, DATA_ERR_ABORT))
SEQ_OPTS_PUTS("data_err=abort");
+ if (DUMMY_ENCRYPTION_ENABLED(sbi))
+ SEQ_OPTS_PUTS("test_dummy_encryption");
ext4_show_quota_options(seq, sb);
return 0;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 84/88] ext4, dax: add ext4_bmap to ext4_dax_aops
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (82 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 83/88] ext4: show test_dummy_encryption mount option in /proc/mounts Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 85/88] ext4, dax: set ext4_dax_aops for dax files Greg Kroah-Hartman
` (7 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Toshi Kani, Theodore Tso, Jan Kara
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Toshi Kani <toshi.kani@hpe.com>
commit 94dbb63117e82253c9592816aa4465f0a9c94850 upstream.
Ext4 mount path calls .bmap to the journal inode. This currently
works for the DAX mount case because ext4_iget() always set
'ext4_da_aops' to any regular files.
In preparation to fix ext4_iget() to set 'ext4_dax_aops' for ext4
DAX files, add ext4_bmap() to 'ext4_dax_aops', since bmap works for
DAX inodes.
Fixes: 5f0663bb4a64 ("ext4, dax: introduce ext4_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/inode.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3951,6 +3951,7 @@ static const struct address_space_operat
.writepages = ext4_dax_writepages,
.direct_IO = noop_direct_IO,
.set_page_dirty = noop_set_page_dirty,
+ .bmap = ext4_bmap,
.invalidatepage = noop_invalidatepage,
};
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 85/88] ext4, dax: set ext4_dax_aops for dax files
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (83 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 84/88] ext4, dax: add ext4_bmap to ext4_dax_aops Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 86/88] sched/fair: Fix vruntime_normalized() for remote non-migration wakeup Greg Kroah-Hartman
` (6 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Toshi Kani, Theodore Tso, Jan Kara
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Toshi Kani <toshi.kani@hpe.com>
commit cce6c9f7e6029caee45c459db5b3e78fec6973cb upstream.
Sync syscall to DAX file needs to flush processor cache, but it
currently does not flush to existing DAX files. This is because
'ext4_da_aops' is set to address_space_operations of existing DAX
files, instead of 'ext4_dax_aops', since S_DAX flag is set after
ext4_set_aops() in the open path.
New file
--------
lookup_open
ext4_create
__ext4_new_inode
ext4_set_inode_flags // Set S_DAX flag
ext4_set_aops // Set aops to ext4_dax_aops
Existing file
-------------
lookup_open
ext4_lookup
ext4_iget
ext4_set_aops // Set aops to ext4_da_aops
ext4_set_inode_flags // Set S_DAX flag
Change ext4_iget() to initialize i_flags before ext4_set_aops().
Fixes: 5f0663bb4a64 ("ext4, dax: introduce ext4_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4861,6 +4861,7 @@ struct inode *ext4_iget(struct super_blo
* not initialized on a new filesystem. */
}
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
+ ext4_set_inode_flags(inode);
inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
if (ext4_has_feature_64bit(sb))
@@ -5010,7 +5011,6 @@ struct inode *ext4_iget(struct super_blo
goto bad_inode;
}
brelse(iloc.bh);
- ext4_set_inode_flags(inode);
unlock_new_inode(inode);
return inode;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 86/88] sched/fair: Fix vruntime_normalized() for remote non-migration wakeup
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (84 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 85/88] ext4, dax: set ext4_dax_aops for dax files Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 87/88] vmw_balloon: include asm/io.h Greg Kroah-Hartman
` (5 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra, Dietmar Eggemann,
Steve Muckle, Chris Redpath, John Dias, Linus Torvalds,
Miguel de Dios, Morten Rasmussen, Patrick Bellasi, Paul Turner,
Quentin Perret, Thomas Gleixner, Todd Kjos, kernel-team,
Ingo Molnar
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve Muckle <smuckle@google.com>
commit d0cdb3ce8834332d918fc9c8ff74f8a169ec9abe upstream.
When a task which previously ran on a given CPU is remotely queued to
wake up on that same CPU, there is a period where the task's state is
TASK_WAKING and its vruntime is not normalized. This is not accounted
for in vruntime_normalized() which will cause an error in the task's
vruntime if it is switched from the fair class during this time.
For example if it is boosted to RT priority via rt_mutex_setprio(),
rq->min_vruntime will not be subtracted from the task's vruntime but
it will be added again when the task returns to the fair class. The
task's vruntime will have been erroneously doubled and the effective
priority of the task will be reduced.
Note this will also lead to inflation of all vruntimes since the doubled
vruntime value will become the rq's min_vruntime when other tasks leave
the rq. This leads to repeated doubling of the vruntime and priority
penalty.
Fix this by recognizing a WAKING task's vruntime as normalized only if
sched_remote_wakeup is true. This indicates a migration, in which case
the vruntime would have been normalized in migrate_task_rq_fair().
Based on a similar patch from John Dias <joaodias@google.com>.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Steve Muckle <smuckle@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: John Dias <joaodias@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel de Dios <migueldedios@google.com>
Cc: Morten Rasmussen <Morten.Rasmussen@arm.com>
Cc: Patrick Bellasi <Patrick.Bellasi@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: kernel-team@android.com
Fixes: b5179ac70de8 ("sched/fair: Prepare to fix fairness problems on migration")
Link: http://lkml.kernel.org/r/20180831224217.169476-1-smuckle@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/fair.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -10019,7 +10019,8 @@ static inline bool vruntime_normalized(s
* - A task which has been woken up by try_to_wake_up() and
* waiting for actually being woken up by sched_ttwu_pending().
*/
- if (!se->sum_exec_runtime || p->state == TASK_WAKING)
+ if (!se->sum_exec_runtime ||
+ (p->state == TASK_WAKING && p->sched_remote_wakeup))
return true;
return false;
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 87/88] vmw_balloon: include asm/io.h
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (85 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 86/88] sched/fair: Fix vruntime_normalized() for remote non-migration wakeup Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
2018-09-27 9:04 ` [PATCH 4.18 88/88] iw_cxgb4: only allow 1 flush on user qps Greg Kroah-Hartman
` (4 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kbuild test robot, Xavier Deguillard,
Nadav Amit
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nadav Amit <namit@vmware.com>
commit a3b92ee6fc171d7c9d9b6b829b7fef169210440c upstream.
Fix a build error due to missing virt_to_phys()
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: f0a1bf29d821b ("vmw_balloon: fix inflation with batching")
Cc: stable@vger.kernel.org
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/vmw_balloon.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -45,6 +45,7 @@
#include <linux/seq_file.h>
#include <linux/vmw_vmci_defs.h>
#include <linux/vmw_vmci_api.h>
+#include <linux/io.h>
#include <asm/hypervisor.h>
MODULE_AUTHOR("VMware, Inc.");
^ permalink raw reply [flat|nested] 103+ messages in thread* [PATCH 4.18 88/88] iw_cxgb4: only allow 1 flush on user qps
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (86 preceding siblings ...)
2018-09-27 9:04 ` [PATCH 4.18 87/88] vmw_balloon: include asm/io.h Greg Kroah-Hartman
@ 2018-09-27 9:04 ` Greg Kroah-Hartman
[not found] ` <5bacd49d.1c69fb81.12c01.3b57@mx.google.com>
` (3 subsequent siblings)
91 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-27 9:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steve Wise, Jason Gunthorpe
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve Wise <swise@opengridcomputing.com>
commit 308aa2b8f7b7db3332a7d41099fd37851fb793b2 upstream.
Once the qp has been flushed, it cannot be flushed again. The user qp
flush logic wasn't enforcing it however. The bug can cause
touch-after-free crashes like:
Unable to handle kernel paging request for data at address 0x000001ec
Faulting instruction address: 0xc008000016069100
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4]
LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
Call Trace:
[c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
[c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4]
[c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core]
[c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core]
[c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm]
[c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm]
[c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm]
[c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm]
[c000000000444da4] __fput+0xe4/0x2f0
So fix flush_qp() to only flush the wq once.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/hw/cxgb4/qp.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -1388,6 +1388,12 @@ static void flush_qp(struct c4iw_qp *qhp
schp = to_c4iw_cq(qhp->ibqp.send_cq);
if (qhp->ibqp.uobject) {
+
+ /* for user qps, qhp->wq.flushed is protected by qhp->mutex */
+ if (qhp->wq.flushed)
+ return;
+
+ qhp->wq.flushed = 1;
t4_set_wq_in_error(&qhp->wq);
t4_set_cq_in_error(&rchp->cq);
spin_lock_irqsave(&rchp->comp_handler_lock, flag);
^ permalink raw reply [flat|nested] 103+ messages in thread[parent not found: <5bacd49d.1c69fb81.12c01.3b57@mx.google.com>]
* Re: [PATCH 4.18 00/88] 4.18.11-stable review
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (88 preceding siblings ...)
[not found] ` <5bacd49d.1c69fb81.12c01.3b57@mx.google.com>
@ 2018-09-27 20:00 ` Rafael David Tinoco
2018-09-28 4:51 ` Greg Kroah-Hartman
2018-09-27 20:09 ` Shuah Khan
2018-09-27 21:53 ` Guenter Roeck
91 siblings, 1 reply; 103+ messages in thread
From: Rafael David Tinoco @ 2018-09-27 20:00 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
lkft-triage, stable
On 9/27/18 6:02 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.18.11 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Sep 29 09:02:26 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.18.11-rc1
git repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.18.y
git commit: 85de3234c3f2488b2191a10628720ff56fd65a11
git describe: v4.18.10-89-g85de3234c3f2
Test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-4.18-oe/build/v4.18.10-89-g85de3234c3f2
No regressions (compared to build v4.18.9-231-g183348489d36)
Ran 21068 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 103+ messages in thread* Re: [PATCH 4.18 00/88] 4.18.11-stable review
2018-09-27 20:00 ` Rafael David Tinoco
@ 2018-09-28 4:51 ` Greg Kroah-Hartman
0 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-28 4:51 UTC (permalink / raw)
To: Rafael David Tinoco
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
On Thu, Sep 27, 2018 at 05:00:30PM -0300, Rafael David Tinoco wrote:
> On 9/27/18 6:02 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.18.11 release.
> > There are 88 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat Sep 29 09:02:26 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.11-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Great, thanks for testing all of these and letting me know.
greg k-h
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 00/88] 4.18.11-stable review
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (89 preceding siblings ...)
2018-09-27 20:00 ` Rafael David Tinoco
@ 2018-09-27 20:09 ` Shuah Khan
2018-09-28 4:50 ` Greg Kroah-Hartman
2018-09-27 21:53 ` Guenter Roeck
91 siblings, 1 reply; 103+ messages in thread
From: Shuah Khan @ 2018-09-27 20:09 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
stable, Shuah Khan
On 09/27/2018 03:02 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.18.11 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Sep 29 09:02:26 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 103+ messages in thread* Re: [PATCH 4.18 00/88] 4.18.11-stable review
2018-09-27 20:09 ` Shuah Khan
@ 2018-09-28 4:50 ` Greg Kroah-Hartman
0 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-28 4:50 UTC (permalink / raw)
To: Shuah Khan
Cc: linux-kernel, torvalds, akpm, linux, patches, ben.hutchings,
lkft-triage, stable
On Thu, Sep 27, 2018 at 02:09:08PM -0600, Shuah Khan wrote:
> On 09/27/2018 03:02 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.18.11 release.
> > There are 88 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat Sep 29 09:02:26 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.11-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
^ permalink raw reply [flat|nested] 103+ messages in thread
* Re: [PATCH 4.18 00/88] 4.18.11-stable review
2018-09-27 9:02 [PATCH 4.18 00/88] 4.18.11-stable review Greg Kroah-Hartman
` (90 preceding siblings ...)
2018-09-27 20:09 ` Shuah Khan
@ 2018-09-27 21:53 ` Guenter Roeck
2018-09-28 4:50 ` Greg Kroah-Hartman
91 siblings, 1 reply; 103+ messages in thread
From: Guenter Roeck @ 2018-09-27 21:53 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
lkft-triage, stable
On Thu, Sep 27, 2018 at 11:02:41AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.18.11 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Sep 29 09:02:26 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 137 pass: 137 fail: 0
Qemu test results:
total: 321 pass: 319 fail: 2
Failed tests:
arm:sabrelite:imx_v6_v7_defconfig:imx6dl-sabrelite
powerpc:g3beige:ppc_book3s_defconfig:nosmp:ide:rootfs
arm_sabrelite crashes in drm code. Presumably this is the same problem as
reported by others with v4.14.
powerpc:g3beige is the known problem. Patch should be available upstream
in the near future.
Details are available at https://kerneltests.org/builders/.
Guenter
^ permalink raw reply [flat|nested] 103+ messages in thread* Re: [PATCH 4.18 00/88] 4.18.11-stable review
2018-09-27 21:53 ` Guenter Roeck
@ 2018-09-28 4:50 ` Greg Kroah-Hartman
0 siblings, 0 replies; 103+ messages in thread
From: Greg Kroah-Hartman @ 2018-09-28 4:50 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
lkft-triage, stable
On Thu, Sep 27, 2018 at 02:53:12PM -0700, Guenter Roeck wrote:
> On Thu, Sep 27, 2018 at 11:02:41AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.18.11 release.
> > There are 88 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat Sep 29 09:02:26 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 137 pass: 137 fail: 0
> Qemu test results:
> total: 321 pass: 319 fail: 2
> Failed tests:
> arm:sabrelite:imx_v6_v7_defconfig:imx6dl-sabrelite
> powerpc:g3beige:ppc_book3s_defconfig:nosmp:ide:rootfs
>
> arm_sabrelite crashes in drm code. Presumably this is the same problem as
> reported by others with v4.14.
>
> powerpc:g3beige is the known problem. Patch should be available upstream
> in the near future.
>
> Details are available at https://kerneltests.org/builders/.
Thanks for testing all of these and letting me know.
greg k-h
^ permalink raw reply [flat|nested] 103+ messages in thread