From: Yangbo Lu <yangbo.lu@nxp.com>
To: linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
netdev@vger.kernel.org,
Richard Cochran <richardcochran@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Ioana Radulescu <ruxandra.radulescu@nxp.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Andrew Lunn <andrew@lunn.ch>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Subject: [v2, 1/5] net: dpaa2: move DPAA2 PTP driver out of staging/
Date: Sat, 29 Sep 2018 15:26:41 +0800 [thread overview]
Message-ID: <20180929072645.20027-1-yangbo.lu@nxp.com> (raw)
This patch is to move DPAA2 PTP driver out of staging/
since the dpaa2-eth had been moved out.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- Renamed files rtc.* as dpaa2-ptp.*.
---
drivers/net/ethernet/freescale/Kconfig | 9 +--------
drivers/net/ethernet/freescale/dpaa2/Kconfig | 15 +++++++++++++++
drivers/net/ethernet/freescale/dpaa2/Makefile | 6 ++++--
.../ethernet/freescale/dpaa2/dpaa2-ptp.c} | 2 +-
.../ethernet/freescale/dpaa2/dpaa2-ptp.h} | 0
.../ethernet/freescale/dpaa2}/dprtc-cmd.h | 0
.../rtc => net/ethernet/freescale/dpaa2}/dprtc.c | 0
.../rtc => net/ethernet/freescale/dpaa2}/dprtc.h | 0
drivers/staging/fsl-dpaa2/Kconfig | 8 --------
drivers/staging/fsl-dpaa2/Makefile | 1 -
drivers/staging/fsl-dpaa2/rtc/Makefile | 7 -------
11 files changed, 21 insertions(+), 27 deletions(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa2/Kconfig
rename drivers/{staging/fsl-dpaa2/rtc/rtc.c => net/ethernet/freescale/dpaa2/dpaa2-ptp.c} (99%)
rename drivers/{staging/fsl-dpaa2/rtc/rtc.h => net/ethernet/freescale/dpaa2/dpaa2-ptp.h} (100%)
rename drivers/{staging/fsl-dpaa2/rtc => net/ethernet/freescale/dpaa2}/dprtc-cmd.h (100%)
rename drivers/{staging/fsl-dpaa2/rtc => net/ethernet/freescale/dpaa2}/dprtc.c (100%)
rename drivers/{staging/fsl-dpaa2/rtc => net/ethernet/freescale/dpaa2}/dprtc.h (100%)
delete mode 100644 drivers/staging/fsl-dpaa2/rtc/Makefile
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 7a30276..d3a62bc 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -96,13 +96,6 @@ config GIANFAR
on the 8540.
source "drivers/net/ethernet/freescale/dpaa/Kconfig"
-
-config FSL_DPAA2_ETH
- tristate "Freescale DPAA2 Ethernet"
- depends on FSL_MC_BUS && FSL_MC_DPIO
- depends on NETDEVICES && ETHERNET
- ---help---
- Ethernet driver for Freescale DPAA2 SoCs, using the
- Freescale MC bus driver
+source "drivers/net/ethernet/freescale/dpaa2/Kconfig"
endif # NET_VENDOR_FREESCALE
diff --git a/drivers/net/ethernet/freescale/dpaa2/Kconfig b/drivers/net/ethernet/freescale/dpaa2/Kconfig
new file mode 100644
index 0000000..44c5c3a
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa2/Kconfig
@@ -0,0 +1,15 @@
+config FSL_DPAA2_ETH
+ tristate "Freescale DPAA2 Ethernet"
+ depends on FSL_MC_BUS && FSL_MC_DPIO
+ depends on NETDEVICES && ETHERNET
+ help
+ Ethernet driver for Freescale DPAA2 SoCs, using the
+ Freescale MC bus driver
+
+config FSL_DPAA2_PTP_CLOCK
+ tristate "Freescale DPAA2 PTP Clock"
+ depends on FSL_DPAA2_ETH && POSIX_TIMERS
+ select PTP_1588_CLOCK
+ help
+ This driver adds support for using the DPAA2 1588 timer module
+ as a PTP clock.
diff --git a/drivers/net/ethernet/freescale/dpaa2/Makefile b/drivers/net/ethernet/freescale/dpaa2/Makefile
index 9315ecd..2f424e0 100644
--- a/drivers/net/ethernet/freescale/dpaa2/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa2/Makefile
@@ -3,9 +3,11 @@
# Makefile for the Freescale DPAA2 Ethernet controller
#
-obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o
+obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o
+obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += fsl-dpaa2-ptp.o
-fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o
+fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o
+fsl-dpaa2-ptp-objs := dpaa2-ptp.o dprtc.o
# Needed by the tracing framework
CFLAGS_dpaa2-eth.o := -I$(src)
diff --git a/drivers/staging/fsl-dpaa2/rtc/rtc.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
similarity index 99%
rename from drivers/staging/fsl-dpaa2/rtc/rtc.c
rename to drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
index 0d52cb8..2e90d5a 100644
--- a/drivers/staging/fsl-dpaa2/rtc/rtc.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
@@ -9,7 +9,7 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/fsl/mc.h>
-#include "rtc.h"
+#include "dpaa2-ptp.h"
struct ptp_dpaa2_priv {
struct fsl_mc_device *rtc_mc_dev;
diff --git a/drivers/staging/fsl-dpaa2/rtc/rtc.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.h
similarity index 100%
rename from drivers/staging/fsl-dpaa2/rtc/rtc.h
rename to drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.h
diff --git a/drivers/staging/fsl-dpaa2/rtc/dprtc-cmd.h b/drivers/net/ethernet/freescale/dpaa2/dprtc-cmd.h
similarity index 100%
rename from drivers/staging/fsl-dpaa2/rtc/dprtc-cmd.h
rename to drivers/net/ethernet/freescale/dpaa2/dprtc-cmd.h
diff --git a/drivers/staging/fsl-dpaa2/rtc/dprtc.c b/drivers/net/ethernet/freescale/dpaa2/dprtc.c
similarity index 100%
rename from drivers/staging/fsl-dpaa2/rtc/dprtc.c
rename to drivers/net/ethernet/freescale/dpaa2/dprtc.c
diff --git a/drivers/staging/fsl-dpaa2/rtc/dprtc.h b/drivers/net/ethernet/freescale/dpaa2/dprtc.h
similarity index 100%
rename from drivers/staging/fsl-dpaa2/rtc/dprtc.h
rename to drivers/net/ethernet/freescale/dpaa2/dprtc.h
diff --git a/drivers/staging/fsl-dpaa2/Kconfig b/drivers/staging/fsl-dpaa2/Kconfig
index 59aaae7..991e154 100644
--- a/drivers/staging/fsl-dpaa2/Kconfig
+++ b/drivers/staging/fsl-dpaa2/Kconfig
@@ -16,11 +16,3 @@ config FSL_DPAA2_ETHSW
---help---
Driver for Freescale DPAA2 Ethernet Switch. Select
BRIDGE to have support for bridge tools.
-
-config FSL_DPAA2_PTP_CLOCK
- tristate "Freescale DPAA2 PTP Clock"
- depends on FSL_DPAA2_ETH && POSIX_TIMERS
- select PTP_1588_CLOCK
- help
- This driver adds support for using the DPAA2 1588 timer module
- as a PTP clock.
diff --git a/drivers/staging/fsl-dpaa2/Makefile b/drivers/staging/fsl-dpaa2/Makefile
index 464f242..c92ab98 100644
--- a/drivers/staging/fsl-dpaa2/Makefile
+++ b/drivers/staging/fsl-dpaa2/Makefile
@@ -3,4 +3,3 @@
#
obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/
-obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += rtc/
diff --git a/drivers/staging/fsl-dpaa2/rtc/Makefile b/drivers/staging/fsl-dpaa2/rtc/Makefile
deleted file mode 100644
index 5468da0..0000000
--- a/drivers/staging/fsl-dpaa2/rtc/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the Freescale DPAA2 PTP clock
-#
-
-obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += dpaa2-rtc.o
-
-dpaa2-rtc-objs := rtc.o dprtc.o
--
1.7.1
next reply other threads:[~2018-09-29 7:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-29 7:26 Yangbo Lu [this message]
2018-09-29 7:26 ` [v2, 2/5] MAINTAINERS: update files maintained under DPAA2 PTP/ETHERNET Yangbo Lu
2018-09-29 7:26 ` [v2, 3/5] net: dpaa2: rename rtc as ptp in dpaa2-ptp driver Yangbo Lu
2018-09-29 7:26 ` [v2, 4/5] net: dpaa2: remove unused code for dprtc Yangbo Lu
2018-09-29 7:26 ` [v2, 5/5] net: dpaa2: fix and improve dpaa2-ptp driver Yangbo Lu
2018-09-29 19:46 ` [v2, 1/5] net: dpaa2: move DPAA2 PTP driver out of staging/ Andrew Lunn
2018-10-08 3:11 ` Y.b. Lu
2018-10-08 7:50 ` Y.b. Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180929072645.20027-1-yangbo.lu@nxp.com \
--to=yangbo.lu@nxp.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=ruxandra.radulescu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).