* [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
@ 2018-10-05 4:46 Kai-Heng Feng
2018-10-15 3:33 ` Kai Heng Feng
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Kai-Heng Feng @ 2018-10-05 4:46 UTC (permalink / raw)
To: jikos
Cc: benjamin.tissoires, hdegoede, linux-input, linux-kernel, Kai-Heng Feng
Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
although it works in display manager.
During user logging, the display manager exits, close the HID device,
then the device gets runtime suspended and powered off. The desktop
session begins shortly after, opens the HID device, then the device gets
runtime resumed and powered on.
If the trasition from display manager to desktop sesesion is fast, the
touchpanel cannot switch from powered off to powered on in short
timeframe. So add a small delay to workaround the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v2:
- Use quirk to only match affected touchpanel
- Only delay the next power on if the time hasn't elapsed
drivers/hid/hid-ids.h | 3 +++
drivers/hid/i2c-hid/i2c-hid-core.c | 19 +++++++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 16342188df19..c1b5f03eb630 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -926,6 +926,9 @@
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
+#define I2C_VENDOR_ID_RAYDIUM 0x2386
+#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33
+
#define USB_VENDOR_ID_RAZER 0x1532
#define USB_DEVICE_ID_RAZER_BLADE_14 0x011D
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 4aab96cf0818..3cde7c1b9c33 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -49,6 +49,7 @@
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
+#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
/* flags */
#define I2C_HID_STARTED 0
@@ -158,6 +159,8 @@ struct i2c_hid {
bool irq_wake_enabled;
struct mutex reset_lock;
+
+ unsigned long sleep_delay;
};
static const struct i2c_hid_quirks {
@@ -172,6 +175,8 @@ static const struct i2c_hid_quirks {
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
I2C_HID_QUIRK_NO_RUNTIME_PM },
+ { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
+ I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
{ 0, 0 }
};
@@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
+ unsigned long now, delay;
i2c_hid_dbg(ihid, "%s\n", __func__);
@@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
goto set_pwr_exit;
}
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
+ power_state == I2C_HID_PWR_ON) {
+ now = jiffies;
+ if (time_after(ihid->sleep_delay, now)) {
+ delay = jiffies_to_usecs(ihid->sleep_delay - now);
+ usleep_range(delay, delay + 1);
+ }
+ }
+
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
+ if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
+ power_state == I2C_HID_PWR_SLEEP)
+ ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
+
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
2018-10-05 4:46 [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel Kai-Heng Feng
@ 2018-10-15 3:33 ` Kai Heng Feng
2018-10-15 8:04 ` Benjamin Tissoires
2018-10-26 15:09 ` Jiri Kosina
2 siblings, 0 replies; 5+ messages in thread
From: Kai Heng Feng @ 2018-10-15 3:33 UTC (permalink / raw)
To: Jiri Kosina
Cc: Benjamin Tissoires, Hans de Goede, open list:HID CORE LAYER,
linux-kernel
Hi Jiri and Benjamin,
> On Oct 5, 2018, at 12:46, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote:
>
> Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
> although it works in display manager.
>
> During user logging, the display manager exits, close the HID device,
> then the device gets runtime suspended and powered off. The desktop
> session begins shortly after, opens the HID device, then the device gets
> runtime resumed and powered on.
>
> If the trasition from display manager to desktop sesesion is fast, the
> touchpanel cannot switch from powered off to powered on in short
> timeframe. So add a small delay to workaround the issue.
Please review my patch and let me know if the approach is okay, thanks!
Kai-Heng
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v2:
> - Use quirk to only match affected touchpanel
> - Only delay the next power on if the time hasn't elapsed
>
> drivers/hid/hid-ids.h | 3 +++
> drivers/hid/i2c-hid/i2c-hid-core.c | 19 +++++++++++++++++++
> 2 files changed, 22 insertions(+)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 16342188df19..c1b5f03eb630 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -926,6 +926,9 @@
> #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003
> #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
>
> +#define I2C_VENDOR_ID_RAYDIUM 0x2386
> +#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33
> +
> #define USB_VENDOR_ID_RAZER 0x1532
> #define USB_DEVICE_ID_RAZER_BLADE_14 0x011D
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
> index 4aab96cf0818..3cde7c1b9c33 100644
> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
> @@ -49,6 +49,7 @@
> #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
> #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
> #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
> +#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
>
> /* flags */
> #define I2C_HID_STARTED 0
> @@ -158,6 +159,8 @@ struct i2c_hid {
>
> bool irq_wake_enabled;
> struct mutex reset_lock;
> +
> + unsigned long sleep_delay;
> };
>
> static const struct i2c_hid_quirks {
> @@ -172,6 +175,8 @@ static const struct i2c_hid_quirks {
> { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
> I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
> I2C_HID_QUIRK_NO_RUNTIME_PM },
> + { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
> + I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
> { 0, 0 }
> };
>
> @@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
> {
> struct i2c_hid *ihid = i2c_get_clientdata(client);
> int ret;
> + unsigned long now, delay;
>
> i2c_hid_dbg(ihid, "%s\n", __func__);
>
> @@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
> goto set_pwr_exit;
> }
>
> + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
> + power_state == I2C_HID_PWR_ON) {
> + now = jiffies;
> + if (time_after(ihid->sleep_delay, now)) {
> + delay = jiffies_to_usecs(ihid->sleep_delay - now);
> + usleep_range(delay, delay + 1);
> + }
> + }
> +
> ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
> 0, NULL, 0, NULL, 0);
>
> + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
> + power_state == I2C_HID_PWR_SLEEP)
> + ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
> +
> if (ret)
> dev_err(&client->dev, "failed to change power setting.\n");
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
2018-10-05 4:46 [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel Kai-Heng Feng
2018-10-15 3:33 ` Kai Heng Feng
@ 2018-10-15 8:04 ` Benjamin Tissoires
2018-10-16 8:41 ` Kai Heng Feng
2018-10-26 15:09 ` Jiri Kosina
2 siblings, 1 reply; 5+ messages in thread
From: Benjamin Tissoires @ 2018-10-15 8:04 UTC (permalink / raw)
To: Kai Heng Feng; +Cc: Jiri Kosina, Hans de Goede, open list:HID CORE LAYER, lkml
On Fri, Oct 5, 2018 at 6:46 AM Kai-Heng Feng
<kai.heng.feng@canonical.com> wrote:
>
> Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
> although it works in display manager.
>
> During user logging, the display manager exits, close the HID device,
> then the device gets runtime suspended and powered off. The desktop
> session begins shortly after, opens the HID device, then the device gets
> runtime resumed and powered on.
>
> If the trasition from display manager to desktop sesesion is fast, the
> touchpanel cannot switch from powered off to powered on in short
> timeframe. So add a small delay to workaround the issue.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v2:
> - Use quirk to only match affected touchpanel
> - Only delay the next power on if the time hasn't elapsed
Hi,
I like the patch much better. And I even would be tempted to have this
unconditionally enabled now that the general path doesn't have the
msleep in the middle.
So how about we merge this patch now, and if in the long run we see
more devices that require this quirk, then we can probably remove the
specific quirk and make it mandatory?
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cheers,
Benjamin
>
> drivers/hid/hid-ids.h | 3 +++
> drivers/hid/i2c-hid/i2c-hid-core.c | 19 +++++++++++++++++++
> 2 files changed, 22 insertions(+)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 16342188df19..c1b5f03eb630 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -926,6 +926,9 @@
> #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003
> #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
>
> +#define I2C_VENDOR_ID_RAYDIUM 0x2386
> +#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33
> +
> #define USB_VENDOR_ID_RAZER 0x1532
> #define USB_DEVICE_ID_RAZER_BLADE_14 0x011D
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
> index 4aab96cf0818..3cde7c1b9c33 100644
> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
> @@ -49,6 +49,7 @@
> #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
> #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
> #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
> +#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
>
> /* flags */
> #define I2C_HID_STARTED 0
> @@ -158,6 +159,8 @@ struct i2c_hid {
>
> bool irq_wake_enabled;
> struct mutex reset_lock;
> +
> + unsigned long sleep_delay;
> };
>
> static const struct i2c_hid_quirks {
> @@ -172,6 +175,8 @@ static const struct i2c_hid_quirks {
> { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
> I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
> I2C_HID_QUIRK_NO_RUNTIME_PM },
> + { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
> + I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
> { 0, 0 }
> };
>
> @@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
> {
> struct i2c_hid *ihid = i2c_get_clientdata(client);
> int ret;
> + unsigned long now, delay;
>
> i2c_hid_dbg(ihid, "%s\n", __func__);
>
> @@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
> goto set_pwr_exit;
> }
>
> + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
> + power_state == I2C_HID_PWR_ON) {
> + now = jiffies;
> + if (time_after(ihid->sleep_delay, now)) {
> + delay = jiffies_to_usecs(ihid->sleep_delay - now);
> + usleep_range(delay, delay + 1);
> + }
> + }
> +
> ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
> 0, NULL, 0, NULL, 0);
>
> + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
> + power_state == I2C_HID_PWR_SLEEP)
> + ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
> +
> if (ret)
> dev_err(&client->dev, "failed to change power setting.\n");
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
2018-10-15 8:04 ` Benjamin Tissoires
@ 2018-10-16 8:41 ` Kai Heng Feng
0 siblings, 0 replies; 5+ messages in thread
From: Kai Heng Feng @ 2018-10-16 8:41 UTC (permalink / raw)
To: Benjamin Tissoires
Cc: Jiri Kosina, Hans de Goede, open list:HID CORE LAYER, lkml
> On Oct 15, 2018, at 16:04, Benjamin Tissoires <benjamin.tissoires@redhat.com> wrote:
>
> On Fri, Oct 5, 2018 at 6:46 AM Kai-Heng Feng
> <kai.heng.feng@canonical.com> wrote:
>>
>> Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
>> although it works in display manager.
>>
>> During user logging, the display manager exits, close the HID device,
>> then the device gets runtime suspended and powered off. The desktop
>> session begins shortly after, opens the HID device, then the device gets
>> runtime resumed and powered on.
>>
>> If the trasition from display manager to desktop sesesion is fast, the
>> touchpanel cannot switch from powered off to powered on in short
>> timeframe. So add a small delay to workaround the issue.
>>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>> ---
>> v2:
>> - Use quirk to only match affected touchpanel
>> - Only delay the next power on if the time hasn't elapsed
>
> Hi,
>
> I like the patch much better. And I even would be tempted to have this
> unconditionally enabled now that the general path doesn't have the
> msleep in the middle.
>
> So how about we merge this patch now, and if in the long run we see
> more devices that require this quirk, then we can probably remove the
> specific quirk and make it mandatory?
Of course, that’s totally makes sense.
Thanks for the review.
Kai-Heng
>
> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
>
> Cheers,
> Benjamin
>
>>
>> drivers/hid/hid-ids.h | 3 +++
>> drivers/hid/i2c-hid/i2c-hid-core.c | 19 +++++++++++++++++++
>> 2 files changed, 22 insertions(+)
>>
>> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
>> index 16342188df19..c1b5f03eb630 100644
>> --- a/drivers/hid/hid-ids.h
>> +++ b/drivers/hid/hid-ids.h
>> @@ -926,6 +926,9 @@
>> #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003
>> #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
>>
>> +#define I2C_VENDOR_ID_RAYDIUM 0x2386
>> +#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33
>> +
>> #define USB_VENDOR_ID_RAZER 0x1532
>> #define USB_DEVICE_ID_RAZER_BLADE_14 0x011D
>>
>> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
>> index 4aab96cf0818..3cde7c1b9c33 100644
>> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
>> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
>> @@ -49,6 +49,7 @@
>> #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
>> #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
>> #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
>> +#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
>>
>> /* flags */
>> #define I2C_HID_STARTED 0
>> @@ -158,6 +159,8 @@ struct i2c_hid {
>>
>> bool irq_wake_enabled;
>> struct mutex reset_lock;
>> +
>> + unsigned long sleep_delay;
>> };
>>
>> static const struct i2c_hid_quirks {
>> @@ -172,6 +175,8 @@ static const struct i2c_hid_quirks {
>> { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
>> I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
>> I2C_HID_QUIRK_NO_RUNTIME_PM },
>> + { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
>> + I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
>> { 0, 0 }
>> };
>>
>> @@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
>> {
>> struct i2c_hid *ihid = i2c_get_clientdata(client);
>> int ret;
>> + unsigned long now, delay;
>>
>> i2c_hid_dbg(ihid, "%s\n", __func__);
>>
>> @@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
>> goto set_pwr_exit;
>> }
>>
>> + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
>> + power_state == I2C_HID_PWR_ON) {
>> + now = jiffies;
>> + if (time_after(ihid->sleep_delay, now)) {
>> + delay = jiffies_to_usecs(ihid->sleep_delay - now);
>> + usleep_range(delay, delay + 1);
>> + }
>> + }
>> +
>> ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
>> 0, NULL, 0, NULL, 0);
>>
>> + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
>> + power_state == I2C_HID_PWR_SLEEP)
>> + ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
>> +
>> if (ret)
>> dev_err(&client->dev, "failed to change power setting.\n");
>>
>> --
>> 2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
2018-10-05 4:46 [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel Kai-Heng Feng
2018-10-15 3:33 ` Kai Heng Feng
2018-10-15 8:04 ` Benjamin Tissoires
@ 2018-10-26 15:09 ` Jiri Kosina
2 siblings, 0 replies; 5+ messages in thread
From: Jiri Kosina @ 2018-10-26 15:09 UTC (permalink / raw)
To: Kai-Heng Feng; +Cc: benjamin.tissoires, hdegoede, linux-input, linux-kernel
On Fri, 5 Oct 2018, Kai-Heng Feng wrote:
> Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
> although it works in display manager.
>
> During user logging, the display manager exits, close the HID device,
> then the device gets runtime suspended and powered off. The desktop
> session begins shortly after, opens the HID device, then the device gets
> runtime resumed and powered on.
>
> If the trasition from display manager to desktop sesesion is fast, the
> touchpanel cannot switch from powered off to powered on in short
> timeframe. So add a small delay to workaround the issue.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v2:
> - Use quirk to only match affected touchpanel
> - Only delay the next power on if the time hasn't elapsed
Applied, thanks.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-10-26 15:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-05 4:46 [PATCH v2] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel Kai-Heng Feng
2018-10-15 3:33 ` Kai Heng Feng
2018-10-15 8:04 ` Benjamin Tissoires
2018-10-16 8:41 ` Kai Heng Feng
2018-10-26 15:09 ` Jiri Kosina
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).