From: Paul Kocialkowski <contact@paulk.fr> To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Thierry Reding <thierry.reding@gmail.com>, David Airlie <airlied@linux.ie>, linux-sunxi@googlegroups.com, Mark Van den Borre <mark@fosdem.org>, Gerry Demaret <gerry@fosdem.org>, Luc Verhaegen <libv@skynet.be>, Paul Kocialkowski <contact@paulk.fr> Subject: [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface Date: Wed, 10 Oct 2018 13:41:31 +0200 [thread overview] Message-ID: <20181010114134.8211-1-contact@paulk.fr> (raw) Some panels need an active-low data enable (DE) signal for the RGB interface. This requires flipping a bit in the TCON0 polarity register when setting up the mode for the RGB interface. Add a new helper function to match specific bus flags and use it to set the polarity inversion bit for the DE signal when required. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 28 ++++++++++++++++++++++++++-- drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 + 2 files changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 3fb084f802e2..d249a462ec09 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -78,6 +78,24 @@ static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder) return -EINVAL; } +static bool sun4i_tcon_match_bus_flags(const struct drm_encoder *encoder, + u32 bus_flags) +{ + struct drm_connector *connector; + struct drm_display_info *info; + + connector = sun4i_tcon_get_connector(encoder); + if (!connector) + return false; + + info = &connector->display_info; + + if ((info->bus_flags & bus_flags) == bus_flags) + return true; + + return false; +} + static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, bool enabled) { @@ -415,6 +433,7 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, } static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, + const struct drm_encoder *encoder, const struct drm_display_mode *mode) { unsigned int bp, hsync, vsync; @@ -474,8 +493,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; + if (sun4i_tcon_match_bus_flags(encoder, DRM_BUS_FLAG_DE_LOW)) + val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE; + regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, - SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, + SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_VSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_DE_NEGATIVE, val); /* Map output pins to channel 0 */ @@ -596,7 +620,7 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, sun4i_tcon0_mode_set_lvds(tcon, encoder, mode); break; case DRM_MODE_ENCODER_NONE: - sun4i_tcon0_mode_set_rgb(tcon, mode); + sun4i_tcon0_mode_set_rgb(tcon, encoder, mode); sun4i_tcon_set_mux(tcon, 0, encoder); break; case DRM_MODE_ENCODER_TVDAC: diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index f6a071cd5a6f..708399c80561 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -113,6 +113,7 @@ #define SUN4I_TCON0_IO_POL_REG 0x88 #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) +#define SUN4I_TCON0_IO_POL_DE_NEGATIVE BIT(27) #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) #define SUN4I_TCON0_IO_POL_VSYNC_POSITIVE BIT(24) -- 2.19.0
next reply other threads:[~2018-10-10 11:42 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-10 11:41 Paul Kocialkowski [this message] 2018-10-10 11:41 ` [PATCH 2/4] drm/panel: simple: Add support for the Lemaker BL035 3.5" LCD Paul Kocialkowski 2018-10-10 14:58 ` Maxime Ripard 2018-10-23 10:08 ` Paul Kocialkowski 2018-10-24 16:57 ` Maxime Ripard 2018-10-10 11:41 ` [PATCH 3/4] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins Paul Kocialkowski 2018-10-10 14:59 ` Maxime Ripard 2018-10-10 11:41 ` [PATCH NOT FOR MERGE 4/4] ARM: dts: sun7i-a20-bananapi: Add bindings for the BL035 3.5" LCD Paul Kocialkowski 2018-10-10 14:57 ` [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface Maxime Ripard 2018-10-23 9:33 ` Paul Kocialkowski 2018-10-24 16:47 ` Maxime Ripard 2018-10-24 17:24 ` Paul Kocialkowski 2018-10-26 11:20 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181010114134.8211-1-contact@paulk.fr \ --to=contact@paulk.fr \ --cc=airlied@linux.ie \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=gerry@fosdem.org \ --cc=libv@skynet.be \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=mark.rutland@arm.com \ --cc=mark@fosdem.org \ --cc=maxime.ripard@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ --cc=wens@csie.org \ --subject='Re: [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).