linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Paul Kocialkowski <contact@paulk.fr>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Chen-Yu Tsai <wens@csie.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	David Airlie <airlied@linux.ie>,
	linux-sunxi@googlegroups.com,
	Mark Van den Borre <mark@fosdem.org>,
	Gerry Demaret <gerry@fosdem.org>, Luc Verhaegen <libv@skynet.be>
Subject: Re: [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface
Date: Fri, 26 Oct 2018 12:20:15 +0100	[thread overview]
Message-ID: <20181026112015.55wa4f6b7odpuusw@flea> (raw)
In-Reply-To: <265be8b3daab5b9fedcf7646c68c4319a2564b3c.camel@paulk.fr>

On Wed, Oct 24, 2018 at 07:24:32PM +0200, Paul Kocialkowski wrote:
> Hi,
> 
> Le mercredi 24 octobre 2018 à 17:47 +0100, Maxime Ripard a écrit :
> > On Tue, Oct 23, 2018 at 11:33:10AM +0200, Paul Kocialkowski wrote:
> > > Hi,
> > > 
> > > Le mercredi 10 octobre 2018 à 16:57 +0200, Maxime Ripard a écrit :
> > > > On Wed, Oct 10, 2018 at 01:41:31PM +0200, Paul Kocialkowski wrote:
> > > > > Some panels need an active-low data enable (DE) signal for the RGB
> > > > > interface. This requires flipping a bit in the TCON0 polarity register
> > > > > when setting up the mode for the RGB interface.
> > > > > 
> > > > > Add a new helper function to match specific bus flags and use it to set
> > > > > the polarity inversion bit for the DE signal when required.
> > > > > 
> > > > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> > > > > ---
> > > > >  drivers/gpu/drm/sun4i/sun4i_tcon.c | 28 ++++++++++++++++++++++++++--
> > > > >  drivers/gpu/drm/sun4i/sun4i_tcon.h |  1 +
> > > > >  2 files changed, 27 insertions(+), 2 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > > index 3fb084f802e2..d249a462ec09 100644
> > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> > > > > @@ -78,6 +78,24 @@ static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder)
> > > > >  	return -EINVAL;
> > > > >  }
> > > > >  
> > > > > +static bool sun4i_tcon_match_bus_flags(const struct drm_encoder *encoder,
> > > > > +				       u32 bus_flags)
> > > > > +{
> > > > > +	struct drm_connector *connector;
> > > > > +	struct drm_display_info *info;
> > > > > +
> > > > > +	connector = sun4i_tcon_get_connector(encoder);
> > > > > +	if (!connector)
> > > > > +		return false;
> > > > > +
> > > > > +	info = &connector->display_info;
> > > > > +
> > > > > +	if ((info->bus_flags & bus_flags) == bus_flags)
> > > > > +		return true;
> > > > > +
> > > > > +	return false;
> > > > > +}
> > > > > +
> > > > >  static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
> > > > >  					  bool enabled)
> > > > >  {
> > > > > @@ -415,6 +433,7 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
> > > > >  }
> > > > >  
> > > > >  static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
> > > > > +				     const struct drm_encoder *encoder,
> > > > >  				     const struct drm_display_mode *mode)
> > > > >  {
> > > > >  	unsigned int bp, hsync, vsync;
> > > > > @@ -474,8 +493,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
> > > > >  	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> > > > >  		val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
> > > > >  
> > > > > +	if (sun4i_tcon_match_bus_flags(encoder, DRM_BUS_FLAG_DE_LOW))
> > > > > +		val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE;
> > > > > +
> > > > 
> > > > There's other flags in use in that function, you should also migrate
> > > > them (ideally by splitting that new function into a separate patch).
> > > 
> > > Actually, these other flags are not DRM bus flags but DRM mode flags,
> > > which can be accessed directly from the mode pointer passed as
> > > argument. Thus, they don't require a helper.
> > 
> > I was talking about DRM_BUS_FLAG_PIXDATA_POSEDGE and
> > DRM_BUS_FLAG_PIXDATA_NEGEDGE, which are in the current tree.
> 
> Thanks, I guess I need to rebase these patches atop the current tree!
> 
> Looking at how these flags are used in the current tree, I see that the
> connector's display_info structure (that contains the bus flags) is
> retreived from tcon->panel.
> 
> Would it make sense to change this and retreive it from the encoder,
> passed as argument to that function (as I've done in this patch)
> instead? This way, this wouldn't only apply to panels, but also to
> external bridges. It would also somewhat streamline the logic.
> 
> What do you think?

That looks like a good idea :)

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

      reply	other threads:[~2018-10-26 11:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-10 11:41 Paul Kocialkowski
2018-10-10 11:41 ` [PATCH 2/4] drm/panel: simple: Add support for the Lemaker BL035 3.5" LCD Paul Kocialkowski
2018-10-10 14:58   ` Maxime Ripard
2018-10-23 10:08     ` Paul Kocialkowski
2018-10-24 16:57       ` Maxime Ripard
2018-10-10 11:41 ` [PATCH 3/4] ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins Paul Kocialkowski
2018-10-10 14:59   ` Maxime Ripard
2018-10-10 11:41 ` [PATCH NOT FOR MERGE 4/4] ARM: dts: sun7i-a20-bananapi: Add bindings for the BL035 3.5" LCD Paul Kocialkowski
2018-10-10 14:57 ` [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface Maxime Ripard
2018-10-23  9:33   ` Paul Kocialkowski
2018-10-24 16:47     ` Maxime Ripard
2018-10-24 17:24       ` Paul Kocialkowski
2018-10-26 11:20         ` Maxime Ripard [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181026112015.55wa4f6b7odpuusw@flea \
    --to=maxime.ripard@bootlin.com \
    --cc=airlied@linux.ie \
    --cc=contact@paulk.fr \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gerry@fosdem.org \
    --cc=libv@skynet.be \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=mark@fosdem.org \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=wens@csie.org \
    --subject='Re: [PATCH 1/4] drm/sun4i: tcon: Support an active-low DE signal with RGB interface' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).