[PATCH v2 7/8] Input: olpc_apsp: enable the SP clock

[Lubomir Rintel <lkundrak@v3.sk>]

Without the clock, the keyboard controller won't operate.
Tested on an OLPC XO 1.75.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/input/serio/olpc_apsp.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/input/serio/olpc_apsp.c b/drivers/input/serio/olpc_apsp.c
index 8b19a47dfa46..fe9e19014e70 100644
--- a/drivers/input/serio/olpc_apsp.c
+++ b/drivers/input/serio/olpc_apsp.c
@@ -23,6 +23,7 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 /*
  * The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
@@ -74,6 +75,7 @@ struct olpc_apsp {
 	struct serio *kbio;
 	struct serio *padio;
 	void __iomem *base;
+	struct clk *clk;
 	int open_count;
 	int irq;
 };
@@ -146,8 +148,13 @@ static int olpc_apsp_open(struct serio *port)
 	struct olpc_apsp *priv = port->port_data;
 	unsigned int tmp;
 	unsigned long l;
+	int error;
 
 	if (priv->open_count++ == 0) {
+		error = clk_prepare_enable(priv->clk);
+		if (error)
+			return error;
+
 		l = readl(priv->base + COMMAND_FIFO_STATUS);
 		if (!(l & CMD_STS_MASK)) {
 			dev_err(priv->dev, "SP cannot accept commands.\n");
@@ -171,6 +178,8 @@ static void olpc_apsp_close(struct serio *port)
 		/* Disable interrupt 0 */
 		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
 		writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
+
+		clk_disable_unprepare(priv->clk);
 	}
 }
 
@@ -198,6 +207,10 @@ static int olpc_apsp_probe(struct platform_device *pdev)
 	if (priv->irq < 0)
 		return priv->irq;
 
+	priv->clk = devm_clk_get(&pdev->dev, "sp");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
 	/* KEYBOARD */
 	kb_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
 	if (!kb_serio)
-- 
2.19.0