From: Ben Dooks <ben.dooks@codethink.co.uk>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kernel@lists.codethink.co.uk, gregkh@linuxfoundation.org,
bjorn@mork.no, steve.glendinning@shawell.net,
Ben Dooks <ben.dooks@codethink.co.uk>
Subject: [PATCH 2/7] net: asix: add usbnet -> priv function
Date: Fri, 12 Oct 2018 10:16:37 +0100 [thread overview]
Message-ID: <20181012091642.21294-3-ben.dooks@codethink.co.uk> (raw)
In-Reply-To: <20181012091642.21294-1-ben.dooks@codethink.co.uk>
There are a number of places in the asix driver where it gets the
private-data from the usbnet passed in. It would be sensible to have
one inline function to convert it and change all points in the driver
to use that.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
drivers/net/usb/asix.h | 5 +++++
drivers/net/usb/asix_common.c | 4 ++--
drivers/net/usb/asix_devices.c | 16 ++++++++--------
drivers/net/usb/ax88172a.c | 2 +-
4 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 9a4171b90947..4bbb52669ac4 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -197,6 +197,11 @@ extern const struct driver_info ax88172a_info;
/* ASIX specific flags */
#define FLAG_EEPROM_MAC (1UL << 0) /* init device MAC from eeprom */
+static inline struct asix_data *usbnet_to_asix(struct usbnet *usb)
+{
+ return (struct asix_data *)&usb->data;
+}
+
int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data, int in_pm);
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index e95dd12edec4..1fd650faca5b 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -418,7 +418,7 @@ int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
void asix_set_multicast(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
u16 rx_ctl = AX_DEFAULT_RX_CTL;
if (net->flags & IFF_PROMISC) {
@@ -751,7 +751,7 @@ void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
int asix_set_mac_address(struct net_device *net, void *p)
{
struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
struct sockaddr *addr = p;
if (netif_running(net))
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index b654f05b2ccd..8e387f06dccf 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -144,7 +144,7 @@ static const struct ethtool_ops ax88172_ethtool_ops = {
static void ax88172_set_multicast(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
u8 rx_ctl = 0x8c;
if (net->flags & IFF_PROMISC) {
@@ -332,7 +332,7 @@ static int ax88772_link_reset(struct usbnet *dev)
static int ax88772_reset(struct usbnet *dev)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
int ret;
/* Rewrite MAC address */
@@ -359,7 +359,7 @@ static int ax88772_reset(struct usbnet *dev)
static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
int ret, embd_phy;
u16 rx_ctl;
@@ -454,7 +454,7 @@ static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
int ret, embd_phy;
u16 rx_ctl, phy14h, phy15h, phy16h;
u8 chipcode = 0;
@@ -795,7 +795,7 @@ static const struct ethtool_ops ax88178_ethtool_ops = {
static int marvell_phy_init(struct usbnet *dev)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
u16 reg;
netdev_dbg(dev->net, "marvell_phy_init()\n");
@@ -827,7 +827,7 @@ static int marvell_phy_init(struct usbnet *dev)
static int rtl8211cl_phy_init(struct usbnet *dev)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
@@ -874,7 +874,7 @@ static int marvell_led_status(struct usbnet *dev, u16 speed)
static int ax88178_reset(struct usbnet *dev)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
int ret;
__le16 eeprom;
u8 status;
@@ -962,7 +962,7 @@ static int ax88178_link_reset(struct usbnet *dev)
{
u16 mode;
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
u32 speed;
netdev_dbg(dev->net, "ax88178_link_reset()\n");
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 501576f53854..08f33c89f002 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -289,7 +289,7 @@ static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
static int ax88172a_reset(struct usbnet *dev)
{
- struct asix_data *data = (struct asix_data *)&dev->data;
+ struct asix_data *data = usbnet_to_asix(dev);
struct ax88172a_private *priv = dev->driver_priv;
int ret;
u16 rx_ctl;
--
2.19.1
next prev parent reply other threads:[~2018-10-12 9:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 9:16 usbnet private-data accessor functions Ben Dooks
2018-10-12 9:16 ` [PATCH 1/7] net: smsc75xx: add usbnet -> priv function Ben Dooks
2018-10-12 10:19 ` Greg KH
2018-10-12 9:16 ` Ben Dooks [this message]
2018-10-12 10:20 ` [PATCH 2/7] net: asix: " Greg KH
2018-10-12 9:16 ` [PATCH 3/7] net: usb: asix88179_178a: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` [PATCH 4/7] net: qmi_wwan: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 10:44 ` Bjørn Mork
2018-10-12 13:22 ` Ben Dooks
2018-10-12 9:16 ` [PATCH 5/7] net: cdc_ether: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` [PATCH 6/7] net: huawei_cdc_ncm: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` [PATCH 7/7] net: usb: sr9800: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 15:38 ` usbnet private-data accessor functions Oliver Neukum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181012091642.21294-3-ben.dooks@codethink.co.uk \
--to=ben.dooks@codethink.co.uk \
--cc=bjorn@mork.no \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@lists.codethink.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=steve.glendinning@shawell.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).