From: Ben Dooks <ben.dooks@codethink.co.uk>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kernel@lists.codethink.co.uk, gregkh@linuxfoundation.org,
bjorn@mork.no, steve.glendinning@shawell.net,
Ben Dooks <ben.dooks@codethink.co.uk>
Subject: [PATCH 4/7] net: qmi_wwan: add usbnet -> priv function
Date: Fri, 12 Oct 2018 10:16:39 +0100 [thread overview]
Message-ID: <20181012091642.21294-5-ben.dooks@codethink.co.uk> (raw)
In-Reply-To: <20181012091642.21294-1-ben.dooks@codethink.co.uk>
There are a number of places in the qmi_wwan driver where it gets the
private-data from the usbnet passed in. It would be sensible to have
one inline function to convert it and change all points in the driver
to use that.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
drivers/net/usb/qmi_wwan.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 533b6fb8d923..45930758a945 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -76,6 +76,11 @@ struct qmimux_priv {
u8 mux_id;
};
+static inline struct qmi_wwan_state *usbnet_to_qmi(struct usbnet *usb)
+{
+ return (void *) &usb->data;
+}
+
static int qmimux_open(struct net_device *dev)
{
struct qmimux_priv *priv = netdev_priv(dev);
@@ -253,7 +258,7 @@ static void qmimux_unregister_device(struct net_device *dev)
static void qmi_wwan_netdev_setup(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
if (info->flags & QMI_WWAN_FLAG_RAWIP) {
net->header_ops = NULL; /* No header */
@@ -276,7 +281,7 @@ static void qmi_wwan_netdev_setup(struct net_device *net)
static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
{
struct usbnet *dev = netdev_priv(to_net_dev(d));
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
}
@@ -284,7 +289,7 @@ static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char
static ssize_t raw_ip_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
{
struct usbnet *dev = netdev_priv(to_net_dev(d));
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
bool enable;
int ret;
@@ -346,7 +351,7 @@ static ssize_t add_mux_show(struct device *d, struct device_attribute *attr, cha
static ssize_t add_mux_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
{
struct usbnet *dev = netdev_priv(to_net_dev(d));
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
u8 mux_id;
int ret;
@@ -391,7 +396,7 @@ static ssize_t del_mux_show(struct device *d, struct device_attribute *attr, cha
static ssize_t del_mux_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
{
struct usbnet *dev = netdev_priv(to_net_dev(d));
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
struct net_device *del_dev;
u8 mux_id;
int ret = 0;
@@ -468,7 +473,7 @@ static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
*/
static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
__be16 proto;
@@ -555,7 +560,7 @@ static const struct net_device_ops qmi_wwan_netdev_ops = {
*/
static int qmi_wwan_manage_power(struct usbnet *dev, int on)
{
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
int rv;
dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
@@ -589,7 +594,7 @@ static int qmi_wwan_register_subdriver(struct usbnet *dev)
{
int rv;
struct usb_driver *subdriver = NULL;
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
/* collect bulk endpoints */
rv = usbnet_get_endpoints(dev, info->data);
@@ -651,7 +656,7 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
struct usb_cdc_union_desc *cdc_union;
struct usb_cdc_ether_desc *cdc_ether;
struct usb_driver *driver = driver_of(intf);
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
struct usb_cdc_parsed_header hdr;
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
@@ -746,7 +751,7 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
{
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
struct usb_driver *driver = driver_of(intf);
struct usb_interface *other;
@@ -785,7 +790,7 @@ static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
int ret;
/* Both usbnet_suspend() and subdriver->suspend() MUST return 0
@@ -808,7 +813,7 @@ static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
static int qmi_wwan_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
- struct qmi_wwan_state *info = (void *)&dev->data;
+ struct qmi_wwan_state *info = usbnet_to_qmi(dev);
int ret = 0;
bool callsub = (intf == info->control && info->subdriver &&
info->subdriver->resume);
@@ -1406,7 +1411,7 @@ static void qmi_wwan_disconnect(struct usb_interface *intf)
/* called twice if separate control and data intf */
if (!dev)
return;
- info = (void *)&dev->data;
+ info = usbnet_to_qmi(dev);
if (info->flags & QMI_WWAN_FLAG_MUX) {
if (!rtnl_trylock()) {
restart_syscall();
--
2.19.1
next prev parent reply other threads:[~2018-10-12 9:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 9:16 usbnet private-data accessor functions Ben Dooks
2018-10-12 9:16 ` [PATCH 1/7] net: smsc75xx: add usbnet -> priv function Ben Dooks
2018-10-12 10:19 ` Greg KH
2018-10-12 9:16 ` [PATCH 2/7] net: asix: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` [PATCH 3/7] net: usb: asix88179_178a: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` Ben Dooks [this message]
2018-10-12 10:20 ` [PATCH 4/7] net: qmi_wwan: " Greg KH
2018-10-12 10:44 ` Bjørn Mork
2018-10-12 13:22 ` Ben Dooks
2018-10-12 9:16 ` [PATCH 5/7] net: cdc_ether: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` [PATCH 6/7] net: huawei_cdc_ncm: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 9:16 ` [PATCH 7/7] net: usb: sr9800: " Ben Dooks
2018-10-12 10:20 ` Greg KH
2018-10-12 15:38 ` usbnet private-data accessor functions Oliver Neukum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181012091642.21294-5-ben.dooks@codethink.co.uk \
--to=ben.dooks@codethink.co.uk \
--cc=bjorn@mork.no \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@lists.codethink.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=steve.glendinning@shawell.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).