[PATCH] arm64: dts: rockchip: Use default brightness table for gru.

[PATCH] arm64: dts: rockchip: Use default brightness table for gru.

[Enric Balletbo i Serra]

After commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye") the pwm_bl driver is able to calculate a default
brightness table. The calculated table for this PWM will have more
granularity and will be adjusted to change the brightness linearly to
the human eye. Use that table instead of have a DT-defined table with
less granularity.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Hi Heiko,

Note that the patch was only tested on a Samsung Chromebook Plus
(kevin), will be very interesting if someone can test on other gru-based
devices, like Bob, before apply this patch.

Best regards,
 Enric

 arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index ae8bb721005e..8dbe2c58b3ce 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -194,14 +194,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
-				     17 18 19 20 21 22 23 24 25 26 27 28 29 30
-				     31 32 33 34 35 36 37 38 39 40 41 42 43 44
-				     45 46 47 48 49 50 51 52 53 54 55 56 57 58
-				     59 60 61 62 63 64 65 66 67 68 69 70 71 72
-				     73 74 75 76 77 78 79 80 81 82 83 84 85 86
-				     87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
-		default-brightness-level = <51>;
 		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 		power-supply = <&pp3300_disp>;
 		pinctrl-names = "default";
-- 
2.19.1

Re: [PATCH] arm64: dts: rockchip: Use default brightness table for gru.

[Heiko Stuebner]

Am Dienstag, 16. Oktober 2018, 16:13:04 CET schrieb Enric Balletbo i Serra:
> After commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED
> linearly to human eye") the pwm_bl driver is able to calculate a default
> brightness table. The calculated table for this PWM will have more
> granularity and will be adjusted to change the brightness linearly to
> the human eye. Use that table instead of have a DT-defined table with
> less granularity.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Hi Heiko,
> 
> Note that the patch was only tested on a Samsung Chromebook Plus
> (kevin), will be very interesting if someone can test on other gru-based
> devices, like Bob, before apply this patch.
> 
> Best regards,
>  Enric

gave it a spin on Bob - works as expected - and applied for 4.21

Thanks
Heiko