linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	tglx@linutronix.de, daniel.lezcano@linaro.org
Cc: linux-arm-kernel@lists.infradead.org, khilman@baylibre.com,
	carlo@caione.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 1/2] clocksource: meson6_timer: use register names from the datasheet
Date: Sun, 28 Oct 2018 13:55:00 +0100	[thread overview]
Message-ID: <20181028125501.17336-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20181028125501.17336-1-martin.blumenstingl@googlemail.com>

This makes the driver use the names from S805 datasheet for the
preprocessor #defines. This makes it easier to spot that the driver
currently only supports Timer A (as clockevent with interrupt support)
and Timer E (as clocksource without interrupts). Timer B, C and D (which
are similar to Timer A) are currently not supported by the driver.

While here, this also removes the internal "CED_ID" and "CSD_ID" defines
which are used to identify the timer. These IDs are not described in the
datasheet and thus make it harder to compare the code to what's written
in the datasheet.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clocksource/meson6_timer.c | 110 ++++++++++++++++++-----------
 1 file changed, 68 insertions(+), 42 deletions(-)

diff --git a/drivers/clocksource/meson6_timer.c b/drivers/clocksource/meson6_timer.c
index 92f20991a937..c622135bee9d 100644
--- a/drivers/clocksource/meson6_timer.c
+++ b/drivers/clocksource/meson6_timer.c
@@ -10,6 +10,8 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -20,80 +22,102 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 
-#define CED_ID			0
-#define CSD_ID			4
-
-#define TIMER_ISA_MUX		0
-#define TIMER_ISA_VAL(t)	(((t) + 1) << 2)
-
-#define TIMER_INPUT_BIT(t)	(2 * (t))
-#define TIMER_ENABLE_BIT(t)	(16 + (t))
-#define TIMER_PERIODIC_BIT(t)	(12 + (t))
+enum meson6_timera_input_clock {
+	MESON_TIMERA_CLOCK_1US = 0x0,
+	MESON_TIMERA_CLOCK_10US = 0x1,
+	MESON_TIMERA_CLOCK_100US = 0x2,
+	MESON_TIMERA_CLOCK_1MS = 0x3,
+};
 
-#define TIMER_CED_INPUT_MASK	(3UL << TIMER_INPUT_BIT(CED_ID))
-#define TIMER_CSD_INPUT_MASK	(7UL << TIMER_INPUT_BIT(CSD_ID))
+enum meson6_timere_input_clock {
+	MESON_TIMERE_CLOCK_SYSTEM_CLOCK = 0x0,
+	MESON_TIMERE_CLOCK_1US = 0x1,
+	MESON_TIMERE_CLOCK_10US = 0x2,
+	MESON_TIMERE_CLOCK_100US = 0x3,
+	MESON_TIMERE_CLOCK_1MS = 0x4,
+};
 
-#define TIMER_CED_UNIT_1US	0
-#define TIMER_CSD_UNIT_1US	1
+#define MESON_ISA_TIMER_MUX					0x00
+#define MESON_ISA_TIMER_MUX_TIMERD_EN				BIT(19)
+#define MESON_ISA_TIMER_MUX_TIMERC_EN				BIT(18)
+#define MESON_ISA_TIMER_MUX_TIMERB_EN				BIT(17)
+#define MESON_ISA_TIMER_MUX_TIMERA_EN				BIT(16)
+#define MESON_ISA_TIMER_MUX_TIMERD_MODE				BIT(15)
+#define MESON_ISA_TIMER_MUX_TIMERC_MODE				BIT(14)
+#define MESON_ISA_TIMER_MUX_TIMERB_MODE				BIT(13)
+#define MESON_ISA_TIMER_MUX_TIMERA_MODE				BIT(12)
+#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK		GENMASK(10, 8)
+#define MESON_ISA_TIMER_MUX_TIMERD_INPUT_CLOCK_MASK		GENMASK(7, 6)
+#define MESON_ISA_TIMER_MUX_TIMERC_INPUT_CLOCK_MASK		GENMASK(5, 4)
+#define MESON_ISA_TIMER_MUX_TIMERB_INPUT_CLOCK_MASK		GENMASK(3, 2)
+#define MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK		GENMASK(1, 0)
+
+#define MESON_ISA_TIMERA					0x04
+#define MESON_ISA_TIMERB					0x08
+#define MESON_ISA_TIMERC					0x0c
+#define MESON_ISA_TIMERD					0x10
+#define MESON_ISA_TIMERE					0x14
 
 static void __iomem *timer_base;
 
 static u64 notrace meson6_timer_sched_read(void)
 {
-	return (u64)readl(timer_base + TIMER_ISA_VAL(CSD_ID));
+	return (u64)readl(timer_base + MESON_ISA_TIMERE);
 }
 
-static void meson6_clkevt_time_stop(unsigned char timer)
+static void meson6_clkevt_time_stop(void)
 {
-	u32 val = readl(timer_base + TIMER_ISA_MUX);
+	u32 val = readl(timer_base + MESON_ISA_TIMER_MUX);
 
-	writel(val & ~TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
+	writel(val & ~MESON_ISA_TIMER_MUX_TIMERA_EN,
+	       timer_base + MESON_ISA_TIMER_MUX);
 }
 
-static void meson6_clkevt_time_setup(unsigned char timer, unsigned long delay)
+static void meson6_clkevt_time_setup(unsigned long delay)
 {
-	writel(delay, timer_base + TIMER_ISA_VAL(timer));
+	writel(delay, timer_base + MESON_ISA_TIMERA);
 }
 
-static void meson6_clkevt_time_start(unsigned char timer, bool periodic)
+static void meson6_clkevt_time_start(bool periodic)
 {
-	u32 val = readl(timer_base + TIMER_ISA_MUX);
+	u32 val = readl(timer_base + MESON_ISA_TIMER_MUX);
 
 	if (periodic)
-		val |= TIMER_PERIODIC_BIT(timer);
+		val |= MESON_ISA_TIMER_MUX_TIMERA_MODE;
 	else
-		val &= ~TIMER_PERIODIC_BIT(timer);
+		val &= ~MESON_ISA_TIMER_MUX_TIMERA_MODE;
 
-	writel(val | TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
+	writel(val | MESON_ISA_TIMER_MUX_TIMERA_EN,
+	       timer_base + MESON_ISA_TIMER_MUX);
 }
 
 static int meson6_shutdown(struct clock_event_device *evt)
 {
-	meson6_clkevt_time_stop(CED_ID);
+	meson6_clkevt_time_stop();
 	return 0;
 }
 
 static int meson6_set_oneshot(struct clock_event_device *evt)
 {
-	meson6_clkevt_time_stop(CED_ID);
-	meson6_clkevt_time_start(CED_ID, false);
+	meson6_clkevt_time_stop();
+	meson6_clkevt_time_start(false);
 	return 0;
 }
 
 static int meson6_set_periodic(struct clock_event_device *evt)
 {
-	meson6_clkevt_time_stop(CED_ID);
-	meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC / HZ - 1);
-	meson6_clkevt_time_start(CED_ID, true);
+	meson6_clkevt_time_stop();
+	meson6_clkevt_time_setup(USEC_PER_SEC / HZ - 1);
+	meson6_clkevt_time_start(true);
 	return 0;
 }
 
 static int meson6_clkevt_next_event(unsigned long evt,
 				    struct clock_event_device *unused)
 {
-	meson6_clkevt_time_stop(CED_ID);
-	meson6_clkevt_time_setup(CED_ID, evt);
-	meson6_clkevt_time_start(CED_ID, false);
+	meson6_clkevt_time_stop();
+	meson6_clkevt_time_setup(evt);
+	meson6_clkevt_time_start(false);
 
 	return 0;
 }
@@ -144,22 +168,24 @@ static int __init meson6_timer_init(struct device_node *node)
 	}
 
 	/* Set 1us for timer E */
-	val = readl(timer_base + TIMER_ISA_MUX);
-	val &= ~TIMER_CSD_INPUT_MASK;
-	val |= TIMER_CSD_UNIT_1US << TIMER_INPUT_BIT(CSD_ID);
-	writel(val, timer_base + TIMER_ISA_MUX);
+	val = readl(timer_base + MESON_ISA_TIMER_MUX);
+	val &= ~MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK;
+	val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK,
+			  MESON_TIMERE_CLOCK_1US);
+	writel(val, timer_base + MESON_ISA_TIMER_MUX);
 
 	sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC);
-	clocksource_mmio_init(timer_base + TIMER_ISA_VAL(CSD_ID), node->name,
+	clocksource_mmio_init(timer_base + MESON_ISA_TIMERE, node->name,
 			      1000 * 1000, 300, 32, clocksource_mmio_readl_up);
 
 	/* Timer A base 1us */
-	val &= ~TIMER_CED_INPUT_MASK;
-	val |= TIMER_CED_UNIT_1US << TIMER_INPUT_BIT(CED_ID);
-	writel(val, timer_base + TIMER_ISA_MUX);
+	val &= ~MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK;
+	val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK,
+			  MESON_TIMERA_CLOCK_1US);
+	writel(val, timer_base + MESON_ISA_TIMER_MUX);
 
 	/* Stop the timer A */
-	meson6_clkevt_time_stop(CED_ID);
+	meson6_clkevt_time_stop();
 
 	ret = setup_irq(irq, &meson6_timer_irq);
 	if (ret) {
-- 
2.19.1


  reply	other threads:[~2018-10-28 12:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-28 12:54 [PATCH 0/2] clocksource/meson6_timer: implement ARM delay timer Martin Blumenstingl
2018-10-28 12:55 ` Martin Blumenstingl [this message]
2018-11-15  1:35   ` [PATCH 1/2] clocksource: meson6_timer: use register names from the datasheet Daniel Lezcano
2018-11-15  6:23     ` Martin Blumenstingl
2018-11-15 12:15       ` Daniel Lezcano
2018-10-28 12:55 ` [PATCH 2/2] clocksource: meson6_timer: implement ARM delay timer Martin Blumenstingl
2018-11-14 22:33 ` [PATCH 0/2] clocksource/meson6_timer: " Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181028125501.17336-2-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=carlo@caione.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).