linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V2 0/3] ARM: dts: sabreauto: Add flexcan support
@ 2018-10-30  8:42 Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 1/3] ARM: dts: imx6sx-sdb: " Joakim Zhang
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Joakim Zhang @ 2018-10-30  8:42 UTC (permalink / raw)
  To: shawnguo, s.hauer
  Cc: kernel, Fabio Estevam, dl-linux-imx, robh+dt, linux-arm-kernel,
	devicetree, linux-kernel, Joakim Zhang

This patch series intends to add flexcan support for IMX6 platforms.

ChangeLog:
V1-V2:
 *using SPDX tag for new files and remove pinctrl-assert-gpios property.

Dong Aisheng (3):
  ARM: dts: imx6sx-sdb: Add flexcan support
  ARM: dts: imx6sx-sabreauto: Add flexcan support
  ARM: dts: sabreauto: Add flexcan support

 .../boot/dts/imx6dl-sabreauto-flexcan1.dts    | 14 +++++
 .../arm/boot/dts/imx6q-sabreauto-flexcan1.dts | 14 +++++
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      | 47 +++++++++++++++
 arch/arm/boot/dts/imx6sx-sabreauto.dts        | 57 +++++++++++++++++++
 arch/arm/boot/dts/imx6sx-sdb-reva.dts         | 12 ++++
 arch/arm/boot/dts/imx6sx-sdb.dts              |  5 ++
 arch/arm/boot/dts/imx6sx-sdb.dtsi             | 42 ++++++++++++++
 7 files changed, 191 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
 create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts

-- 
2.17.1


^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH V2 1/3] ARM: dts: imx6sx-sdb: Add flexcan support
  2018-10-30  8:42 [PATCH V2 0/3] ARM: dts: sabreauto: Add flexcan support Joakim Zhang
@ 2018-10-30  8:42 ` Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 2/3] ARM: dts: imx6sx-sabreauto: " Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 3/3] ARM: dts: sabreauto: " Joakim Zhang
  2 siblings, 0 replies; 5+ messages in thread
From: Joakim Zhang @ 2018-10-30  8:42 UTC (permalink / raw)
  To: shawnguo, s.hauer
  Cc: kernel, Fabio Estevam, dl-linux-imx, robh+dt, linux-arm-kernel,
	devicetree, linux-kernel, A.s. Dong, Joakim Zhang

From: Dong Aisheng <aisheng.dong@nxp.com>

CAN transceiver is different on RevA and RevB board.
It's active high on RevA while active low on Rev B.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 arch/arm/boot/dts/imx6sx-sdb-reva.dts | 12 ++++++++
 arch/arm/boot/dts/imx6sx-sdb.dts      |  5 ++++
 arch/arm/boot/dts/imx6sx-sdb.dtsi     | 42 +++++++++++++++++++++++++++
 3 files changed, 59 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 9cc6ff206aea..d98dcf00b9c4 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -10,6 +10,18 @@
 
 / {
 	model = "Freescale i.MX6 SoloX SDB RevA Board";
+
+	/* Transceiver EN/STBY is active high on RevA board */
+	reg_can_en: regulator-can-en {
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9bebfe027..092b8de142a8 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -10,6 +10,11 @@
 
 / {
 	model = "Freescale i.MX6 SoloX SDB RevB Board";
+
+	/* Transceiver EN/STBY is active low on RevB board */
+	reg_can_stby: regulator-can-stby {
+		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 53b3408b5fab..4de2473293aa 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -138,6 +138,20 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
 		model = "wm8962-audio";
@@ -204,6 +218,20 @@
 	status = "okay";
 };
 
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -399,6 +427,20 @@
 			>;
 		};
 
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
+				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
+				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
+			>;
+		};
+
 		pinctrl_gpio_keys: gpio_keysgrp {
 			fsl,pins = <
 				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH V2 2/3] ARM: dts: imx6sx-sabreauto: Add flexcan support
  2018-10-30  8:42 [PATCH V2 0/3] ARM: dts: sabreauto: Add flexcan support Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 1/3] ARM: dts: imx6sx-sdb: " Joakim Zhang
@ 2018-10-30  8:42 ` Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 3/3] ARM: dts: sabreauto: " Joakim Zhang
  2 siblings, 0 replies; 5+ messages in thread
From: Joakim Zhang @ 2018-10-30  8:42 UTC (permalink / raw)
  To: shawnguo, s.hauer
  Cc: kernel, Fabio Estevam, dl-linux-imx, robh+dt, linux-arm-kernel,
	devicetree, linux-kernel, A.s. Dong, Joakim Zhang

From: Dong Aisheng <aisheng.dong@nxp.com>

The CAN transceiver on MX6SX Sabreauto board seems in sleep mode
by default after power up the board. User has to press the wakeup
key on ARD baseboard before using the transceiver, or it may not
work properly when power up the board at the first time(warm reset
does not have such issue).

This patch operates the wake pin too besides stby/en pins by chaining
them together in regulator mode.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 arch/arm/boot/dts/imx6sx-sabreauto.dts | 57 ++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 841a27f3198f..8f3319e7692f 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -36,6 +36,35 @@
 		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_can_wake: regulator-can-wake {
+		compatible = "regulator-fixed";
+		regulator-name = "can-wake";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_wake>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
 };
 
 &anaclk2 {
@@ -75,6 +104,20 @@
 	status = "okay";
 };
 
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -149,6 +192,20 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX	0x1b020
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH V2 3/3] ARM: dts: sabreauto: Add flexcan support
  2018-10-30  8:42 [PATCH V2 0/3] ARM: dts: sabreauto: Add flexcan support Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 1/3] ARM: dts: imx6sx-sdb: " Joakim Zhang
  2018-10-30  8:42 ` [PATCH V2 2/3] ARM: dts: imx6sx-sabreauto: " Joakim Zhang
@ 2018-10-30  8:42 ` Joakim Zhang
  2018-11-04 14:26   ` Shawn Guo
  2 siblings, 1 reply; 5+ messages in thread
From: Joakim Zhang @ 2018-10-30  8:42 UTC (permalink / raw)
  To: shawnguo, s.hauer
  Cc: kernel, Fabio Estevam, dl-linux-imx, robh+dt, linux-arm-kernel,
	devicetree, linux-kernel, A.s. Dong, Joakim Zhang

From: Dong Aisheng <aisheng.dong@nxp.com>

The flexcan1 is pin conflict with fec. So we add a new dts file with
flexcan1 enabled with fec disabled for user to use.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 .../boot/dts/imx6dl-sabreauto-flexcan1.dts    | 14 ++++++
 .../arm/boot/dts/imx6q-sabreauto-flexcan1.dts | 14 ++++++
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      | 47 +++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
 create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts

diff --git a/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts b/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
new file mode 100644
index 000000000000..4ebcc283f549
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+#include "imx6dl-sabreauto.dts"
+
+&can1{
+	status = "okay";
+};
+
+&fec {
+	/* pin conflict with flexcan1 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts b/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts
new file mode 100644
index 000000000000..e7e684656f09
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+#include "imx6q-sabreauto.dts"
+
+&can1{
+	status = "okay";
+};
+
+&fec {
+	/* pin conflict with flexcan1 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index a10f0ad0bfb1..c1111b972b46 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -101,6 +101,25 @@
 		enable-active-high;
 	};
 
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
 	sound-cs42888 {
 		compatible = "fsl,imx6-sabreauto-cs42888",
 			"fsl,imx-audio-cs42888";
@@ -279,6 +298,20 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -494,6 +527,20 @@
 			>;
 		};
 
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+			>;
+		};
+
 		pinctrl_gpio_keys: gpiokeysgrp {
 			fsl,pins = <
 				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH V2 3/3] ARM: dts: sabreauto: Add flexcan support
  2018-10-30  8:42 ` [PATCH V2 3/3] ARM: dts: sabreauto: " Joakim Zhang
@ 2018-11-04 14:26   ` Shawn Guo
  0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2018-11-04 14:26 UTC (permalink / raw)
  To: Joakim Zhang
  Cc: s.hauer, kernel, Fabio Estevam, dl-linux-imx, robh+dt,
	linux-arm-kernel, devicetree, linux-kernel, A.s. Dong

On Tue, Oct 30, 2018 at 08:42:47AM +0000, Joakim Zhang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
> 
> The flexcan1 is pin conflict with fec. So we add a new dts file with
> flexcan1 enabled with fec disabled for user to use.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>

We do not want to maintain a pile of DTS files for a single development
board with pin sharing among different devices.

Shawn

> ---
>  .../boot/dts/imx6dl-sabreauto-flexcan1.dts    | 14 ++++++
>  .../arm/boot/dts/imx6q-sabreauto-flexcan1.dts | 14 ++++++
>  arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      | 47 +++++++++++++++++++
>  3 files changed, 75 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts
> 
> diff --git a/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts b/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
> new file mode 100644
> index 000000000000..4ebcc283f549
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-sabreauto-flexcan1.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2013 Freescale Semiconductor, Inc.
> +
> +#include "imx6dl-sabreauto.dts"
> +
> +&can1{
> +	status = "okay";
> +};
> +
> +&fec {
> +	/* pin conflict with flexcan1 */
> +	status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts b/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts
> new file mode 100644
> index 000000000000..e7e684656f09
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-sabreauto-flexcan1.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2013 Freescale Semiconductor, Inc.
> +
> +#include "imx6q-sabreauto.dts"
> +
> +&can1{
> +	status = "okay";
> +};
> +
> +&fec {
> +	/* pin conflict with flexcan1 */
> +	status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index a10f0ad0bfb1..c1111b972b46 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -101,6 +101,25 @@
>  		enable-active-high;
>  	};
>  
> +	reg_can_en: regulator-can-en {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can-en";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_can_stby: regulator-can-stby {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can-stby";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		vin-supply = <&reg_can_en>;
> +	};
> +
>  	sound-cs42888 {
>  		compatible = "fsl,imx6-sabreauto-cs42888",
>  			"fsl,imx-audio-cs42888";
> @@ -279,6 +298,20 @@
>  	status = "okay";
>  };
>  
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_can_stby>;
> +	status = "disabled"; /* pin conflict with fec */
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	xceiver-supply = <&reg_can_stby>;
> +	status = "okay";
> +};
> +
>  &gpmi {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_gpmi_nand>;
> @@ -494,6 +527,20 @@
>  			>;
>  		};
>  
> +		pinctrl_flexcan1: flexcan1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
> +				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
> +			>;
> +		};
> +
> +		pinctrl_flexcan2: flexcan2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
> +				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
> +			>;
> +		};
> +
>  		pinctrl_gpio_keys: gpiokeysgrp {
>  			fsl,pins = <
>  				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-11-04 14:27 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-30  8:42 [PATCH V2 0/3] ARM: dts: sabreauto: Add flexcan support Joakim Zhang
2018-10-30  8:42 ` [PATCH V2 1/3] ARM: dts: imx6sx-sdb: " Joakim Zhang
2018-10-30  8:42 ` [PATCH V2 2/3] ARM: dts: imx6sx-sabreauto: " Joakim Zhang
2018-10-30  8:42 ` [PATCH V2 3/3] ARM: dts: sabreauto: " Joakim Zhang
2018-11-04 14:26   ` Shawn Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).