* [PATCH v3] drm/bochs: add edid support.
@ 2018-10-29 13:45 Gerd Hoffmann
2018-10-29 17:44 ` Jani Nikula
0 siblings, 1 reply; 6+ messages in thread
From: Gerd Hoffmann @ 2018-10-29 13:45 UTC (permalink / raw)
To: dri-devel
Cc: David Airlie, Gerd Hoffmann, David Airlie,
open list:DRM DRIVER FOR BOCHS VIRTUAL GPU, open list
Recent qemu (latest master branch, upcoming 3.1 release) got support
for EDID data. This patch adds guest driver support.
EDID support in qemu is not (yet) enabled by default, so please use
'qemu -device VGA,edid=on' for testing.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/gpu/drm/bochs/bochs.h | 1 +
drivers/gpu/drm/bochs/bochs_hw.c | 39 +++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/bochs/bochs_kms.c | 18 +++++++++++++++---
3 files changed, 55 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h
index e7a69077e4..06b8166efa 100644
--- a/drivers/gpu/drm/bochs/bochs.h
+++ b/drivers/gpu/drm/bochs/bochs.h
@@ -66,6 +66,7 @@ struct bochs_device {
u16 yres_virtual;
u32 stride;
u32 bpp;
+ struct edid *edid;
/* drm */
struct drm_device *dev;
diff --git a/drivers/gpu/drm/bochs/bochs_hw.c b/drivers/gpu/drm/bochs/bochs_hw.c
index cacff73a64..db4afe94c5 100644
--- a/drivers/gpu/drm/bochs/bochs_hw.c
+++ b/drivers/gpu/drm/bochs/bochs_hw.c
@@ -69,6 +69,41 @@ static void bochs_hw_set_little_endian(struct bochs_device *bochs)
#define bochs_hw_set_native_endian(_b) bochs_hw_set_little_endian(_b)
#endif
+static int bochs_load_edid(struct bochs_device *bochs)
+{
+ uint8_t *blob;
+ size_t i, len;
+ uint8_t num_exts;
+
+ if (!bochs->mmio)
+ return -1;
+
+ if ((readb(bochs->mmio+0) != 0x00 ||
+ readb(bochs->mmio+1) != 0xff))
+ return -1;
+
+ num_exts = readb(bochs->mmio + 126);
+ len = EDID_LENGTH * (1 + num_exts);
+ if (len > 0x400 /* vga register offset */)
+ return -1;
+
+ kfree(bochs->edid);
+ bochs->edid = kmalloc(len, GFP_KERNEL);
+ blob = (void *)bochs->edid;
+ for (i = 0; i < len; i++) {
+ blob[i] = readb(bochs->mmio+i);
+ }
+
+ if (!drm_edid_is_valid(bochs->edid)) {
+ DRM_ERROR("EDID is not valid, ignoring.\n");
+ kfree(bochs->edid);
+ bochs->edid = NULL;
+ return -1;
+ }
+
+ return 0;
+}
+
int bochs_hw_init(struct drm_device *dev)
{
struct bochs_device *bochs = dev->dev_private;
@@ -150,6 +185,9 @@ int bochs_hw_init(struct drm_device *dev)
}
noext:
+ if (bochs_load_edid(bochs) == 0)
+ DRM_INFO("Found EDID data blob.\n");
+
return 0;
}
@@ -164,6 +202,7 @@ void bochs_hw_fini(struct drm_device *dev)
if (bochs->fb_map)
iounmap(bochs->fb_map);
pci_release_regions(dev->pdev);
+ kfree(bochs->edid);
}
void bochs_hw_setmode(struct bochs_device *bochs,
diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c
index 9bc5b438ae..b9931443a7 100644
--- a/drivers/gpu/drm/bochs/bochs_kms.c
+++ b/drivers/gpu/drm/bochs/bochs_kms.c
@@ -213,10 +213,17 @@ static void bochs_encoder_init(struct drm_device *dev)
static int bochs_connector_get_modes(struct drm_connector *connector)
{
- int count;
+ struct bochs_device *bochs =
+ container_of(connector, struct bochs_device, connector);
+ int count = 0;
- count = drm_add_modes_noedid(connector, 8192, 8192);
- drm_set_preferred_mode(connector, defx, defy);
+ if (bochs->edid)
+ count = drm_add_edid_modes(connector, bochs->edid);
+
+ if (!count) {
+ count = drm_add_modes_noedid(connector, 8192, 8192);
+ drm_set_preferred_mode(connector, defx, defy);
+ }
return count;
}
@@ -271,6 +278,11 @@ static void bochs_connector_init(struct drm_device *dev)
drm_connector_helper_add(connector,
&bochs_connector_connector_helper_funcs);
drm_connector_register(connector);
+
+ if (bochs->edid) {
+ drm_connector_attach_edid_property(connector);
+ drm_connector_update_edid_property(connector, bochs->edid);
+ }
}
--
2.9.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v3] drm/bochs: add edid support.
2018-10-29 13:45 [PATCH v3] drm/bochs: add edid support Gerd Hoffmann
@ 2018-10-29 17:44 ` Jani Nikula
2018-10-29 20:05 ` Gerd Hoffmann
0 siblings, 1 reply; 6+ messages in thread
From: Jani Nikula @ 2018-10-29 17:44 UTC (permalink / raw)
To: Gerd Hoffmann, dri-devel
Cc: David Airlie, David Airlie, Gerd Hoffmann, open list,
open list:DRM DRIVER FOR BOCHS VIRTUAL GPU
On Mon, 29 Oct 2018, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Recent qemu (latest master branch, upcoming 3.1 release) got support
> for EDID data. This patch adds guest driver support.
>
> EDID support in qemu is not (yet) enabled by default, so please use
> 'qemu -device VGA,edid=on' for testing.
Any chance of making this use drm_get_edid() (requires an i2c_adapter)
or at least drm_do_get_edid()?
BR,
Jani.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
> drivers/gpu/drm/bochs/bochs.h | 1 +
> drivers/gpu/drm/bochs/bochs_hw.c | 39 +++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/bochs/bochs_kms.c | 18 +++++++++++++++---
> 3 files changed, 55 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h
> index e7a69077e4..06b8166efa 100644
> --- a/drivers/gpu/drm/bochs/bochs.h
> +++ b/drivers/gpu/drm/bochs/bochs.h
> @@ -66,6 +66,7 @@ struct bochs_device {
> u16 yres_virtual;
> u32 stride;
> u32 bpp;
> + struct edid *edid;
>
> /* drm */
> struct drm_device *dev;
> diff --git a/drivers/gpu/drm/bochs/bochs_hw.c b/drivers/gpu/drm/bochs/bochs_hw.c
> index cacff73a64..db4afe94c5 100644
> --- a/drivers/gpu/drm/bochs/bochs_hw.c
> +++ b/drivers/gpu/drm/bochs/bochs_hw.c
> @@ -69,6 +69,41 @@ static void bochs_hw_set_little_endian(struct bochs_device *bochs)
> #define bochs_hw_set_native_endian(_b) bochs_hw_set_little_endian(_b)
> #endif
>
> +static int bochs_load_edid(struct bochs_device *bochs)
> +{
> + uint8_t *blob;
> + size_t i, len;
> + uint8_t num_exts;
> +
> + if (!bochs->mmio)
> + return -1;
> +
> + if ((readb(bochs->mmio+0) != 0x00 ||
> + readb(bochs->mmio+1) != 0xff))
> + return -1;
> +
> + num_exts = readb(bochs->mmio + 126);
> + len = EDID_LENGTH * (1 + num_exts);
> + if (len > 0x400 /* vga register offset */)
> + return -1;
> +
> + kfree(bochs->edid);
> + bochs->edid = kmalloc(len, GFP_KERNEL);
> + blob = (void *)bochs->edid;
> + for (i = 0; i < len; i++) {
> + blob[i] = readb(bochs->mmio+i);
> + }
> +
> + if (!drm_edid_is_valid(bochs->edid)) {
> + DRM_ERROR("EDID is not valid, ignoring.\n");
> + kfree(bochs->edid);
> + bochs->edid = NULL;
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> int bochs_hw_init(struct drm_device *dev)
> {
> struct bochs_device *bochs = dev->dev_private;
> @@ -150,6 +185,9 @@ int bochs_hw_init(struct drm_device *dev)
> }
>
> noext:
> + if (bochs_load_edid(bochs) == 0)
> + DRM_INFO("Found EDID data blob.\n");
> +
> return 0;
> }
>
> @@ -164,6 +202,7 @@ void bochs_hw_fini(struct drm_device *dev)
> if (bochs->fb_map)
> iounmap(bochs->fb_map);
> pci_release_regions(dev->pdev);
> + kfree(bochs->edid);
> }
>
> void bochs_hw_setmode(struct bochs_device *bochs,
> diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c
> index 9bc5b438ae..b9931443a7 100644
> --- a/drivers/gpu/drm/bochs/bochs_kms.c
> +++ b/drivers/gpu/drm/bochs/bochs_kms.c
> @@ -213,10 +213,17 @@ static void bochs_encoder_init(struct drm_device *dev)
>
> static int bochs_connector_get_modes(struct drm_connector *connector)
> {
> - int count;
> + struct bochs_device *bochs =
> + container_of(connector, struct bochs_device, connector);
> + int count = 0;
>
> - count = drm_add_modes_noedid(connector, 8192, 8192);
> - drm_set_preferred_mode(connector, defx, defy);
> + if (bochs->edid)
> + count = drm_add_edid_modes(connector, bochs->edid);
> +
> + if (!count) {
> + count = drm_add_modes_noedid(connector, 8192, 8192);
> + drm_set_preferred_mode(connector, defx, defy);
> + }
> return count;
> }
>
> @@ -271,6 +278,11 @@ static void bochs_connector_init(struct drm_device *dev)
> drm_connector_helper_add(connector,
> &bochs_connector_connector_helper_funcs);
> drm_connector_register(connector);
> +
> + if (bochs->edid) {
> + drm_connector_attach_edid_property(connector);
> + drm_connector_update_edid_property(connector, bochs->edid);
> + }
> }
--
Jani Nikula, Intel Open Source Graphics Center
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v3] drm/bochs: add edid support.
2018-10-29 17:44 ` Jani Nikula
@ 2018-10-29 20:05 ` Gerd Hoffmann
2018-10-30 9:06 ` Daniel Vetter
0 siblings, 1 reply; 6+ messages in thread
From: Gerd Hoffmann @ 2018-10-29 20:05 UTC (permalink / raw)
To: Jani Nikula
Cc: dri-devel, David Airlie, David Airlie, open list,
open list:DRM DRIVER FOR BOCHS VIRTUAL GPU
On Mon, Oct 29, 2018 at 07:44:28PM +0200, Jani Nikula wrote:
> On Mon, 29 Oct 2018, Gerd Hoffmann <kraxel@redhat.com> wrote:
> > Recent qemu (latest master branch, upcoming 3.1 release) got support
> > for EDID data. This patch adds guest driver support.
> >
> > EDID support in qemu is not (yet) enabled by default, so please use
> > 'qemu -device VGA,edid=on' for testing.
>
> Any chance of making this use drm_get_edid() (requires an i2c_adapter)
> or at least drm_do_get_edid()?
I'll have a look at using drm_do_get_edid(). drm_get_edid() will not
fly as there is no i2c adapter in the first place.
cheers,
Gerd
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] drm/bochs: add edid support.
2018-10-29 20:05 ` Gerd Hoffmann
@ 2018-10-30 9:06 ` Daniel Vetter
2018-10-30 9:28 ` Jani Nikula
0 siblings, 1 reply; 6+ messages in thread
From: Daniel Vetter @ 2018-10-30 9:06 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: Jani Nikula, David Airlie, David Airlie, open list, dri-devel,
open list:DRM DRIVER FOR BOCHS VIRTUAL GPU
On Mon, Oct 29, 2018 at 09:05:20PM +0100, Gerd Hoffmann wrote:
> On Mon, Oct 29, 2018 at 07:44:28PM +0200, Jani Nikula wrote:
> > On Mon, 29 Oct 2018, Gerd Hoffmann <kraxel@redhat.com> wrote:
> > > Recent qemu (latest master branch, upcoming 3.1 release) got support
> > > for EDID data. This patch adds guest driver support.
> > >
> > > EDID support in qemu is not (yet) enabled by default, so please use
> > > 'qemu -device VGA,edid=on' for testing.
> >
> > Any chance of making this use drm_get_edid() (requires an i2c_adapter)
> > or at least drm_do_get_edid()?
>
> I'll have a look at using drm_do_get_edid(). drm_get_edid() will not
> fly as there is no i2c adapter in the first place.
Hm, not sure that makes sense. drm_do_get_edid is to handle the real-world
flakiness of sinks (it's where all the retry logic resides), if you don't
have a i2c_adapater (because the hw has some magic "give me an edid"
block). For virtual hw we hopefully don't randomly drop bits on the floor
between the guest and host. Imo totally fine as-is.
E.g. we also don't feed the VBT edid through drm_do_get_edid either.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] drm/bochs: add edid support.
2018-10-30 9:06 ` Daniel Vetter
@ 2018-10-30 9:28 ` Jani Nikula
2018-10-30 9:44 ` Daniel Vetter
0 siblings, 1 reply; 6+ messages in thread
From: Jani Nikula @ 2018-10-30 9:28 UTC (permalink / raw)
To: Daniel Vetter, Gerd Hoffmann
Cc: David Airlie, David Airlie, open list, dri-devel,
open list:DRM DRIVER FOR BOCHS VIRTUAL GPU
On Tue, 30 Oct 2018, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Mon, Oct 29, 2018 at 09:05:20PM +0100, Gerd Hoffmann wrote:
>> On Mon, Oct 29, 2018 at 07:44:28PM +0200, Jani Nikula wrote:
>> > On Mon, 29 Oct 2018, Gerd Hoffmann <kraxel@redhat.com> wrote:
>> > > Recent qemu (latest master branch, upcoming 3.1 release) got support
>> > > for EDID data. This patch adds guest driver support.
>> > >
>> > > EDID support in qemu is not (yet) enabled by default, so please use
>> > > 'qemu -device VGA,edid=on' for testing.
>> >
>> > Any chance of making this use drm_get_edid() (requires an i2c_adapter)
>> > or at least drm_do_get_edid()?
>>
>> I'll have a look at using drm_do_get_edid(). drm_get_edid() will not
>> fly as there is no i2c adapter in the first place.
>
> Hm, not sure that makes sense. drm_do_get_edid is to handle the real-world
> flakiness of sinks (it's where all the retry logic resides), if you don't
> have a i2c_adapater (because the hw has some magic "give me an edid"
> block). For virtual hw we hopefully don't randomly drop bits on the floor
> between the guest and host. Imo totally fine as-is.
>
> E.g. we also don't feed the VBT edid through drm_do_get_edid either.
But nowadays we do handle the debugfs EDID override and the EDID
firmware loading in drm_do_get_edid(), so using that gives you those
features.
BR,
Jani.
--
Jani Nikula, Intel Open Source Graphics Center
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] drm/bochs: add edid support.
2018-10-30 9:28 ` Jani Nikula
@ 2018-10-30 9:44 ` Daniel Vetter
0 siblings, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2018-10-30 9:44 UTC (permalink / raw)
To: Jani Nikula
Cc: Daniel Vetter, Gerd Hoffmann, David Airlie, David Airlie,
open list, dri-devel, open list:DRM DRIVER FOR BOCHS VIRTUAL GPU
On Tue, Oct 30, 2018 at 11:28:24AM +0200, Jani Nikula wrote:
> On Tue, 30 Oct 2018, Daniel Vetter <daniel@ffwll.ch> wrote:
> > On Mon, Oct 29, 2018 at 09:05:20PM +0100, Gerd Hoffmann wrote:
> >> On Mon, Oct 29, 2018 at 07:44:28PM +0200, Jani Nikula wrote:
> >> > On Mon, 29 Oct 2018, Gerd Hoffmann <kraxel@redhat.com> wrote:
> >> > > Recent qemu (latest master branch, upcoming 3.1 release) got support
> >> > > for EDID data. This patch adds guest driver support.
> >> > >
> >> > > EDID support in qemu is not (yet) enabled by default, so please use
> >> > > 'qemu -device VGA,edid=on' for testing.
> >> >
> >> > Any chance of making this use drm_get_edid() (requires an i2c_adapter)
> >> > or at least drm_do_get_edid()?
> >>
> >> I'll have a look at using drm_do_get_edid(). drm_get_edid() will not
> >> fly as there is no i2c adapter in the first place.
> >
> > Hm, not sure that makes sense. drm_do_get_edid is to handle the real-world
> > flakiness of sinks (it's where all the retry logic resides), if you don't
> > have a i2c_adapater (because the hw has some magic "give me an edid"
> > block). For virtual hw we hopefully don't randomly drop bits on the floor
> > between the guest and host. Imo totally fine as-is.
> >
> > E.g. we also don't feed the VBT edid through drm_do_get_edid either.
>
> But nowadays we do handle the debugfs EDID override and the EDID
> firmware loading in drm_do_get_edid(), so using that gives you those
> features.
Oh, missed that. Would be good to clarify the kernel doc and mention this
in e.g. both drm_add_edid_modes() and &drm_connector_helper_funcs.get_modes?
And maybe make it more obvious that drm_do_get_edid is also for virtual
drivers, atm the kerneldoc talks a lot about DDC and everything hw.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-10-30 9:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-29 13:45 [PATCH v3] drm/bochs: add edid support Gerd Hoffmann
2018-10-29 17:44 ` Jani Nikula
2018-10-29 20:05 ` Gerd Hoffmann
2018-10-30 9:06 ` Daniel Vetter
2018-10-30 9:28 ` Jani Nikula
2018-10-30 9:44 ` Daniel Vetter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).