From: Mark Rutland <mark.rutland@arm.com>
To: Peng Hao <peng.hao2@zte.com.cn>
Cc: robh+dt@kernel.org, arnd@arndb.de, gregkh@linuxfoundation.org,
andy@infradead.org, dvhart@infradead.org,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org, hutao@cn.fujitsu.com,
linux-doc@vger.kernel.org
Subject: Re: [PATCH V4 1/5] pvpanic: move pvpanic to misc as common driver
Date: Wed, 31 Oct 2018 07:05:17 +0000 [thread overview]
Message-ID: <20181031070517.ijplknobd6en4h5g@salmiak> (raw)
In-Reply-To: <1540993041-25611-1-git-send-email-peng.hao2@zte.com.cn>
On Wed, Oct 31, 2018 at 09:37:17PM +0800, Peng Hao wrote:
> move pvpanic.c from drivers/platform/x86 to drivers/misc.
> following patches will use pvpanic device in arm64.
FWIW, the series as a whole looks fine to me, so for all patches:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Thanks,
Mark.
>
> Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
> ---
> drivers/misc/Kconfig | 7 +++++++
> drivers/misc/Makefile | 1 +
> drivers/{platform/x86 => misc}/pvpanic.c | 0
> drivers/platform/Kconfig | 3 +++
> drivers/platform/Makefile | 1 +
> drivers/platform/x86/Kconfig | 8 --------
> drivers/platform/x86/Makefile | 1 -
> 7 files changed, 12 insertions(+), 9 deletions(-)
> rename drivers/{platform/x86 => misc}/pvpanic.c (100%)
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 5d71300..ca55c94 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -499,6 +499,13 @@ config MISC_RTSX
> tristate
> default MISC_RTSX_PCI || MISC_RTSX_USB
>
> +config PVPANIC
> + tristate "pvpanic device support"
> + help
> + This driver provides support for the pvpanic device. pvpanic is
> + a paravirtualized device provided by QEMU; it lets a virtual machine
> + (guest) communicate panic events to the host.
> +
> source "drivers/misc/c2port/Kconfig"
> source "drivers/misc/eeprom/Kconfig"
> source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 20be70c..39dc005 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -57,3 +57,4 @@ obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
> obj-$(CONFIG_OCXL) += ocxl/
> obj-$(CONFIG_MISC_RTSX) += cardreader/
> +obj-$(CONFIG_PVPANIC) += pvpanic.o
> diff --git a/drivers/platform/x86/pvpanic.c b/drivers/misc/pvpanic.c
> similarity index 100%
> rename from drivers/platform/x86/pvpanic.c
> rename to drivers/misc/pvpanic.c
> diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
> index d4c2e42..8b64b78 100644
> --- a/drivers/platform/Kconfig
> +++ b/drivers/platform/Kconfig
> @@ -1,3 +1,6 @@
> +if ARM64
> +source "drivers/platform/arm/Kconfig"
> +endif
> if X86
> source "drivers/platform/x86/Kconfig"
> endif
> diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
> index 4b2ce58..232231c 100644
> --- a/drivers/platform/Makefile
> +++ b/drivers/platform/Makefile
> @@ -3,6 +3,7 @@
> # Makefile for linux/drivers/platform
> #
>
> +obj-$(CONFIG_ARM64) += arm/
> obj-$(CONFIG_X86) += x86/
> obj-$(CONFIG_MELLANOX_PLATFORM) += mellanox/
> obj-$(CONFIG_MIPS) += mips/
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index ef016e4..a6b412e 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1119,14 +1119,6 @@ config INTEL_SMARTCONNECT
> This driver checks to determine whether the device has Intel Smart
> Connect enabled, and if so disables it.
>
> -config PVPANIC
> - tristate "pvpanic device support"
> - depends on ACPI
> - ---help---
> - This driver provides support for the pvpanic device. pvpanic is
> - a paravirtualized device provided by QEMU; it lets a virtual machine
> - (guest) communicate panic events to the host.
> -
> config INTEL_PMC_IPC
> tristate "Intel PMC IPC Driver"
> depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 2ba6cb7..a4ec299 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -75,7 +75,6 @@ obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o
> obj-$(CONFIG_INTEL_RST) += intel-rst.o
> obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
>
> -obj-$(CONFIG_PVPANIC) += pvpanic.o
> obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o
> obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
> obj-$(CONFIG_SILEAD_DMI) += silead_dmi.o
> --
> 1.8.3.1
>
next prev parent reply other threads:[~2018-10-31 7:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 13:37 [PATCH V4 1/5] pvpanic: move pvpanic to misc as common driver Peng Hao
2018-10-31 7:05 ` Mark Rutland [this message]
2018-10-31 12:45 ` Andy Shevchenko
2018-10-31 13:37 ` [PATCH V4 2/5] misc/pvpanic : convert to SPDX license tags Peng Hao
2018-10-31 12:46 ` Andy Shevchenko
2018-10-31 13:37 ` [PATCH V4 3/5] misc/pvpanic: add MMIO support Peng Hao
2018-10-31 12:49 ` Andy Shevchenko
2018-10-31 13:37 ` [PATCH V4 4/5] misc/pvpanic: add support to get pvpanic device info by FDT Peng Hao
2018-10-31 12:50 ` Andy Shevchenko
2018-10-31 12:53 ` Andy Shevchenko
2018-10-31 13:37 ` [PATCH V4 5/5] dt-bindings/misc/pvpanic :add document for pvpanic-mmio Peng Hao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031070517.ijplknobd6en4h5g@salmiak \
--to=mark.rutland@arm.com \
--cc=andy@infradead.org \
--cc=arnd@arndb.de \
--cc=dvhart@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=hutao@cn.fujitsu.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.hao2@zte.com.cn \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).