* [PATCH v3 01/18] arm64: dts: qcom: qcs404: add base dts files
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul
` (17 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
Add base dts files for QCS404 chipset along with cpu, timer,
gcc and uart2 nodes.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 175 +++++++++++++++++++++++++++++++++++
1 file changed, 175 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs404.dtsi
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
new file mode 100644
index 000000000000..b77d1198ba79
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x0 0 0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-qcs404";
+ reg = <0x01800000 0x80000>;
+ #clock-cells = <1>;
+
+ assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
+ assigned-clock-rates = <19200000>;
+ };
+
+ blsp1_uart2: serial@78b1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b1000 0x200>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "okay";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ timer@b120000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@b121000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ };
+
+ frame@b123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b128000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 0xff08>,
+ <GIC_PPI 3 0xff08>,
+ <GIC_PPI 4 0xff08>,
+ <GIC_PPI 1 0xff08>;
+ };
+};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
2018-11-08 17:50 ` [PATCH v3 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul
` (16 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly
similar with few differences in the peripherals used.
So use a common qcs404-evb.dtsi which contains the common parts and use
qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/Makefile | 2 ++
arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 11 +++++++++++
arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 11 +++++++++++
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++
4 files changed, 38 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a658c07652a7..21d548f02d39 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
new file mode 100644
index 000000000000..2c14903d808e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+ compatible = "qcom,qcs404-evb";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
new file mode 100644
index 000000000000..11269ad3de0d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
+ compatible = "qcom,qcs404-evb";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
new file mode 100644
index 000000000000..91ecbdf0ecda
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include "qcs404.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
2018-11-08 17:50 ` [PATCH v3 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul
2018-11-08 17:50 ` [PATCH v3 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul
` (15 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the reserved memory regions in QCS404
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 41 ++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index b77d1198ba79..58aa1f989089 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -73,6 +73,47 @@
method = "smc";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85600000 {
+ reg = <0 0x85600000 0 0x90000>;
+ no-map;
+ };
+
+ smem_region: memory@85f00000 {
+ reg = <0 0x85f00000 0 0x200000>;
+ no-map;
+ };
+
+ memory@86100000 {
+ reg = <0 0x86100000 0 0x300000>;
+ no-map;
+ };
+
+ wlan_fw_mem: memory@86400000 {
+ reg = <0 0x86400000 0 0x1c00000>;
+ no-map;
+ };
+
+ adsp_fw_mem: memory@88000000 {
+ reg = <0 0x88000000 0 0x1a00000>;
+ no-map;
+ };
+
+ cdsp_fw_mem: memory@89a00000 {
+ reg = <0 0x89a00000 0 0x600000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8a000000 {
+ reg = <0 0x8a000000 0 0x100000>;
+ no-map;
+ };
+ };
+
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (2 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators Vinod Koul
` (14 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add RPM GLINK node and the RPM message ram, hwspinlock, APCS apps global
and smem nodes it depends on.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 44 ++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 58aa1f989089..e21b4a549e75 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -114,12 +114,45 @@
};
};
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: glink-channel {
+ compatible = "qcom,rpm-qcs404";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ rpm_msg_ram: memory@60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x6000>;
+ };
+
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-qcs404";
reg = <0x01800000 0x80000>;
@@ -129,6 +162,11 @@
assigned-clock-rates = <19200000>;
};
+ tcsr_mutex_regs: syscon@1905000 {
+ compatible = "syscon";
+ reg = <0x01905000 0x20000>;
+ };
+
blsp1_uart2: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
@@ -146,6 +184,12 @@
<0x0b002000 0x1000>;
};
+ apcs_glb: mailbox@b011000 {
+ compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+ reg = <0x0b011000 0x1000>;
+ #mbox-cells = <1>;
+ };
+
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (3 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul
` (13 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the RPM regulators found in PMS405 which is used in qcs404-evb
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 97 ++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 91ecbdf0ecda..fc83e935aaa1 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -11,4 +11,101 @@
chosen {
stdout-path = "serial0";
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&rpm_requests {
+ pms405-regulators {
+ compatible = "qcom,rpm-pms405-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_l1_l2-supply = <&vreg_s5_1p35>;
+ vdd_l3_l8-supply = <&vreg_s5_1p35>;
+ vdd_l4-supply = <&vreg_s5_1p35>;
+ vdd_l5_l6-supply = <&vreg_s4_1p8>;
+ vdd_l7-supply = <&vph_pwr>;
+ vdd_l9-supply = <&vreg_s5_1p35>;
+ vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
+
+ vreg_s4_1p8: s4 {
+ regulator-min-microvolt = <1728000>;
+ regulator-max-microvolt = <1920000>;
+ };
+
+ vreg_s5_1p35: s5 {
+ regulator-min-microvolt = <>;
+ regulator-max-microvolt = <>;
+ };
+
+ vreg_l1_1p3: l1 {
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l2_1p275: l2 {
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ vreg_l3_1p05: l3 {
+ regulator-min-microvolt = <976000>;
+ regulator-max-microvolt = <1160000>;
+ };
+
+ vreg_l4_1p2: l4 {
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1256000>;
+ };
+
+ vreg_l5_1p8: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l6_1p8: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vreg_l7_1p8: l7 {
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vreg_l8_1p2: l8 {
+ regulator-min-microvolt = <1136000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l10_3p3: l10 {
+ regulator-min-microvolt = <2936000>;
+ regulator-max-microvolt = <3088000>;
+ };
+
+ vreg_l11_sdc2: l11 {
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l12_3p3: l12 {
+ regulator-min-microvolt = <2968000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l13_3p3: l13 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 06/18] arm64: dts: qcom: qcs404: add smp2p nodes
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (4 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul
` (12 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
Add the smp2p-adsp, smp2p-cdsp and smp2p-wcss nodes found in QCS404.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 60 ++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index e21b4a549e75..cc4dd3186ae9 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -257,4 +257,64 @@
<GIC_PPI 4 0xff08>,
<GIC_PPI 1 0xff08>;
};
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 10>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wcss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 18>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (5 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul
` (11 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the QCS404 TLMM pinctrl node with its three tiles.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index cc4dd3186ae9..3b6e659e3d1f 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -153,6 +153,20 @@
reg = <0x00060000 0x6000>;
};
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,qcs404-pinctrl";
+ reg = <0x01000000 0x200000>,
+ <0x01300000 0x200000>,
+ <0x07b00000 0x200000>;
+ reg-names = "south", "north", "east";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-qcs404";
reg = <0x01800000 0x80000>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (6 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul
` (10 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the sdcc1 node and enable it for the QCS404-EVB.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 64 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 17 +++++++++
2 files changed, 81 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index fc83e935aaa1..4d2ada8dec5d 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -109,3 +109,67 @@
};
};
};
+
+&sdcc1 {
+ status = "ok";
+
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&tlmm {
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ dreive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ dreive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3b6e659e3d1f..e83b7c233099 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -181,6 +181,23 @@
reg = <0x01905000 0x20000>;
};
+ sdcc1: sdcc@7804000 {
+ compatible = "qcom,sdhci-msm-v5";
+ reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
+ reg-names = "hc_mem", "cmdq_mem";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ status = "disabled";
+ };
+
blsp1_uart2: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 09/18] arm64: dts: qcom: pms405: add spmi node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (7 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 10/18] arm64: dts: qcom: qcs404: " Vinod Koul
` (9 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
Add the pms405 DT file with spmi node.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pms405.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
new file mode 100644
index 000000000000..7b8104e21507
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pms405_0: pms405@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ };
+};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 10/18] arm64: dts: qcom: qcs404: add spmi node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (8 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul
` (8 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
PMS405 is used in QCS405-EVB so include that with SPMI nodes
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 1 +
arch/arm64/boot/dts/qcom/qcs404.dtsi | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 4d2ada8dec5d..cc5dfb319af8 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -2,6 +2,7 @@
// Copyright (c) 2018, Linaro Limited
#include "qcs404.dtsi"
+#include "pms405.dtsi"
/ {
aliases {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index e83b7c233099..df07c494c47b 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -181,6 +181,24 @@
reg = <0x01905000 0x20000>;
};
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x800000>,
+ <0x02c00000 0x800000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
sdcc1: sdcc@7804000 {
compatible = "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 11/18] arm64: dts: qcom: pms405: add rtc node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (9 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 10/18] arm64: dts: qcom: qcs404: " Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul
` (7 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
RTC is found on PMIC PMS405 and is same as other PMIC used, so add the
rtc node with compatible as qcom,pm8941-rtc
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 7b8104e21507..2b275bbdafa3 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -10,5 +10,11 @@
#address-cells = <1>;
#size-cells = <0>;
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+ };
};
};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 12/18] arm64: dts: qcom: pms405: add gpios
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (10 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul
` (6 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
Add the GPIOs present on PMS405 chip.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 2b275bbdafa3..02b758cfd758 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -10,6 +10,22 @@
#address-cells = <1>;
#size-cells = <0>;
+ pms405_gpios: gpios@c000 {
+ compatible = "qcom,pms405-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>;
+ };
+
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 13/18] arm64: dts: qcom: qcs404: Add scm firmware node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (11 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes Vinod Koul
` (5 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the scm firmware node to QCS404
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index df07c494c47b..373d514eb147 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -62,6 +62,13 @@
};
};
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-qcs404", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (12 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul
` (4 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Bjorn Andersson, Vinod Koul
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the TrustZone based remoteproc nodes and their glink edges for
adsp, cdsp and wcss. Enable them for EVB common DTS.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 12 +++++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 93 ++++++++++++++++++++++++++++++++
2 files changed, 105 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index cc5dfb319af8..d4182756980b 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -21,6 +21,18 @@
};
};
+&rproc_adsp {
+ status = "ok";
+};
+
+&rproc_cdsp {
+ status = "ok";
+};
+
+&rproc_wcss {
+ status = "ok";
+};
+
&rpm_requests {
pms405-regulators {
compatible = "qcom,rpm-pms405-regulators";
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 373d514eb147..a9d6d3dd5945 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -80,6 +80,99 @@
method = "smc";
};
+ rproc_adsp: remoteproc_adsp {
+ compatible = "qcom,qcs404-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_fw_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 8>;
+
+ label = "adsp";
+ };
+ };
+
+ rproc_cdsp: remoteproc_cdsp {
+ compatible = "qcom,qcs404-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <5>;
+ mboxes = <&apcs_glb 12>;
+
+ label = "cdsp";
+ };
+ };
+
+ rproc_wcss: remoteproc_wcss {
+ compatible = "qcom,qcs404-wcss-pas";
+
+ interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&wlan_fw_mem>;
+
+ qcom,smem-states = <&wcss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 16>;
+
+ label = "wcss";
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 15/18] arm64: dts: qcom: qcs404: add prng-ee node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (13 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul
` (3 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
RNG hardware in QCS404 features (Execution Environment) EE for
HLOS to use, add the node for prng-ee for QCS404.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index a9d6d3dd5945..125d9b9b5ffc 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -253,6 +253,13 @@
reg = <0x00060000 0x6000>;
};
+ rng: rng@e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,qcs404-pinctrl";
reg = <0x01000000 0x200000>,
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (14 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul
` (2 subsequent siblings)
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
Add the BAM DMA instance found in BLSP1 node of the QCS404
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 125d9b9b5ffc..f7ac3d0662b4 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -323,6 +323,18 @@
status = "disabled";
};
+ blsp1_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x25000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,controlled-remotely = <1>;
+ qcom,ee = <0>;
+ status = "okay";
+ };
+
blsp1_uart2: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (15 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:50 ` [PATCH v3 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul
2018-11-08 17:57 ` [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
We can use BAM DAM for serial UART data transfers, so add it
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index f7ac3d0662b4..46a4608db214 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -341,6 +341,8 @@
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 5>, <&blsp1_dma 4>;
+ dma-names = "rx", "tx";
status = "okay";
};
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (16 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul
@ 2018-11-08 17:50 ` Vinod Koul
2018-11-08 17:57 ` [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:50 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel, Vinod Koul
PMS405 also features PON block, so add PON and PWRKEY nodes
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 02b758cfd758..a1272a444e02 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -2,6 +2,7 @@
// Copyright (c) 2018, Linaro Limited
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
pms405_0: pms405@0 {
@@ -26,6 +27,21 @@
<0 0xcb 0 IRQ_TYPE_NONE>;
};
+ pon@800 {
+ compatible = "qcom,pms405-pon";
+ reg = <0x0800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
--
2.14.4
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes
2018-11-08 17:50 [PATCH v3 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
` (17 preceding siblings ...)
2018-11-08 17:50 ` [PATCH v3 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul
@ 2018-11-08 17:57 ` Vinod Koul
18 siblings, 0 replies; 20+ messages in thread
From: Vinod Koul @ 2018-11-08 17:57 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, Mark Rutland, linux-arm-msm, linux-soc, devicetree,
linux-kernel
On 08-11-18, 23:20, Vinod Koul wrote:
> This series adds support for various nodes for QCS404-EVB.
>
> Based on v4.20-rc1
>
> Changes in v3:
> - Make the DTS files sorted alphabetcially and by node addresses
> - Add reviewed by from Bjorn
> - Split out the DTS files for EVB 1000 and EVB 4000 boards and add common
> evb dts files for common part
Sorry I sent out the wrong branch :( will send updated one shortly,
apologies for the noise
--
~Vinod
^ permalink raw reply [flat|nested] 20+ messages in thread