From: Vinod Koul <vkoul@kernel.org>
To: Andy Gross <andy.gross@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v5 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
Date: Fri, 9 Nov 2018 15:14:04 +0530 [thread overview]
Message-ID: <20181109094417.12109-6-vkoul@kernel.org> (raw)
In-Reply-To: <20181109094417.12109-1-vkoul@kernel.org>
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the RPM regulators found in PMS405 which is used in qcs404-evb
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 97 ++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 91ecbdf0ecda..d1ba8b8ece46 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -11,4 +11,101 @@
chosen {
stdout-path = "serial0";
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&rpm_requests {
+ pms405-regulators {
+ compatible = "qcom,rpm-pms405-regulators";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-l1-l2-supply = <&vreg_s5_1p35>;
+ vdd-l3-l8-supply = <&vreg_s5_1p35>;
+ vdd-l4-supply = <&vreg_s5_1p35>;
+ vdd-l5-l6-supply = <&vreg_s4_1p8>;
+ vdd-l7-supply = <&vph_pwr>;
+ vdd-l9-supply = <&vreg_s5_1p35>;
+ vdd-l10-l11-l12-l13-supply = <&vph_pwr>;
+
+ vreg_s4_1p8: s4 {
+ regulator-min-microvolt = <1728000>;
+ regulator-max-microvolt = <1920000>;
+ };
+
+ vreg_s5_1p35: s5 {
+ regulator-min-microvolt = <>;
+ regulator-max-microvolt = <>;
+ };
+
+ vreg_l1_1p3: l1 {
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l2_1p275: l2 {
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ vreg_l3_1p05: l3 {
+ regulator-min-microvolt = <976000>;
+ regulator-max-microvolt = <1160000>;
+ };
+
+ vreg_l4_1p2: l4 {
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1256000>;
+ };
+
+ vreg_l5_1p8: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l6_1p8: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vreg_l7_1p8: l7 {
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vreg_l8_1p2: l8 {
+ regulator-min-microvolt = <1136000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l10_3p3: l10 {
+ regulator-min-microvolt = <2936000>;
+ regulator-max-microvolt = <3088000>;
+ };
+
+ vreg_l11_sdc2: l11 {
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l12_3p3: l12 {
+ regulator-min-microvolt = <2968000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l13_3p3: l13 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
};
--
2.14.4
next prev parent reply other threads:[~2018-11-09 9:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 9:43 [PATCH v5 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul
2018-11-09 9:44 ` [PATCH v5 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul
2018-11-17 23:10 ` Bjorn Andersson
2018-11-09 9:44 ` [PATCH v5 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul
2018-11-17 23:11 ` Bjorn Andersson
2018-11-19 12:01 ` Amit Kucheria
2018-11-09 9:44 ` [PATCH v5 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul
2018-11-09 9:44 ` [PATCH v5 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul
2018-11-09 9:44 ` Vinod Koul [this message]
2018-11-09 9:44 ` [PATCH v5 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul
2018-11-09 9:44 ` [PATCH v5 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 10/18] arm64: dts: qcom: qcs404: " Vinod Koul
2018-11-09 9:44 ` [PATCH v5 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul
2018-11-17 23:12 ` Bjorn Andersson
2018-11-09 9:44 ` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes Vinod Koul
2018-11-19 5:31 ` Sibi Sankar
2018-11-09 9:44 ` [PATCH v5 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul
2018-11-09 9:44 ` [PATCH v5 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul
2018-11-09 9:44 ` [PATCH v5 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181109094417.12109-6-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).