[PATCH AUTOSEL 4.19 01/44] bfs: add sanity check at bfs_fill_super()

[PATCH AUTOSEL 4.19 01/44] bfs: add sanity check at bfs_fill_super()

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 9f2df09a33aa2c76ce6385d382693f98d7f2f07e ]

syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().

[1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96

Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/bfs/inode.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 9a69392f1fb3..d81c148682e7 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -350,7 +350,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 
 	s->s_magic = BFS_MAGIC;
 
-	if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
+	if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end) ||
+	    le32_to_cpu(bfs_sb->s_start) < BFS_BSIZE) {
 		printf("Superblock is corrupted\n");
 		goto out1;
 	}
@@ -359,9 +360,11 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 					sizeof(struct bfs_inode)
 					+ BFS_ROOT_INO - 1;
 	imap_len = (info->si_lasti / 8) + 1;
-	info->si_imap = kzalloc(imap_len, GFP_KERNEL);
-	if (!info->si_imap)
+	info->si_imap = kzalloc(imap_len, GFP_KERNEL | __GFP_NOWARN);
+	if (!info->si_imap) {
+		printf("Cannot allocate %u bytes\n", imap_len);
 		goto out1;
+	}
 	for (i = 0; i < BFS_ROOT_INO; i++)
 		set_bit(i, info->si_imap);
 
-- 
2.17.1

[PATCH AUTOSEL 4.19 02/44] cifs: don't dereference smb_file_target before null check

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 8c6c9bed8773375b1d54ccca2911ec892c59db5d ]

There is a null check on dst_file->private data which suggests
it can be potentially null. However, before this check, pointer
smb_file_target is derived from dst_file->private and dereferenced
in the call to tlink_tcon, hence there is a potential null pointer
deference.

Fix this by assigning smb_file_target and target_tcon after the
null pointer sanity checks.

Detected by CoverityScan, CID#1475302 ("Dereference before null check")

Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsfs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 7065426b3280..fb32f3d6925e 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -981,8 +981,8 @@ static int cifs_clone_file_range(struct file *src_file, loff_t off,
 	struct inode *src_inode = file_inode(src_file);
 	struct inode *target_inode = file_inode(dst_file);
 	struct cifsFileInfo *smb_file_src = src_file->private_data;
-	struct cifsFileInfo *smb_file_target = dst_file->private_data;
-	struct cifs_tcon *target_tcon = tlink_tcon(smb_file_target->tlink);
+	struct cifsFileInfo *smb_file_target;
+	struct cifs_tcon *target_tcon;
 	unsigned int xid;
 	int rc;
 
@@ -996,6 +996,9 @@ static int cifs_clone_file_range(struct file *src_file, loff_t off,
 		goto out;
 	}
 
+	smb_file_target = dst_file->private_data;
+	target_tcon = tlink_tcon(smb_file_target->tlink);
+
 	/*
 	 * Note: cifs case is easier than btrfs since server responsible for
 	 * checks for proper open modes and file type and if it wants
-- 
2.17.1

[PATCH AUTOSEL 4.19 03/44] cifs: fix return value for cifs_listxattr

[Sasha Levin]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit 0c5d6cb6643f48ad3775322f3ebab6c7eb67484e ]

If the application buffer was too small to fit all the names
we would still count the number of bytes and return this for
listxattr. This would then trigger a BUG in usercopy.c

Fix the computation of the size so that we return -ERANGE
correctly when the buffer is too small.

This fixes the kernel BUG for xfstest generic/377

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2ops.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 89985a0a6819..812da3e56a22 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -686,6 +686,7 @@ move_smb2_ea_to_cifs(char *dst, size_t dst_size,
 	int rc = 0;
 	unsigned int ea_name_len = ea_name ? strlen(ea_name) : 0;
 	char *name, *value;
+	size_t buf_size = dst_size;
 	size_t name_len, value_len, user_name_len;
 
 	while (src_size > 0) {
@@ -721,9 +722,10 @@ move_smb2_ea_to_cifs(char *dst, size_t dst_size,
 			/* 'user.' plus a terminating null */
 			user_name_len = 5 + 1 + name_len;
 
-			rc += user_name_len;
-
-			if (dst_size >= user_name_len) {
+			if (buf_size == 0) {
+				/* skip copy - calc size only */
+				rc += user_name_len;
+			} else if (dst_size >= user_name_len) {
 				dst_size -= user_name_len;
 				memcpy(dst, "user.", 5);
 				dst += 5;
@@ -731,8 +733,7 @@ move_smb2_ea_to_cifs(char *dst, size_t dst_size,
 				dst += name_len;
 				*dst = 0;
 				++dst;
-			} else if (dst_size == 0) {
-				/* skip copy - calc size only */
+				rc += user_name_len;
 			} else {
 				/* stop before overrun buffer */
 				rc = -ERANGE;
-- 
2.17.1

[PATCH AUTOSEL 4.19 04/44] arm64: kprobe: make page to RO mode when allocate it

[Sasha Levin]

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit 966866892cf89d606544bca22d584ba2ef9ec208 ]

Commit 1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")
has successfully identified code that leaves a page with W+X
permissions.

[    3.245140] arm64/mm: Found insecure W+X mapping at address (____ptrval____)/0xffff000000d90000
[    3.245771] WARNING: CPU: 0 PID: 1 at ../arch/arm64/mm/dump.c:232 note_page+0x410/0x420
[    3.246141] Modules linked in:
[    3.246653] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5-next-20180928-00001-ge70ae259b853-dirty #62
[    3.247008] Hardware name: linux,dummy-virt (DT)
[    3.247347] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    3.247623] pc : note_page+0x410/0x420
[    3.247898] lr : note_page+0x410/0x420
[    3.248071] sp : ffff00000804bcd0
[    3.248254] x29: ffff00000804bcd0 x28: ffff000009274000
[    3.248578] x27: ffff00000921a000 x26: ffff80007dfff000
[    3.248845] x25: ffff0000093f5000 x24: ffff000009526f6a
[    3.249109] x23: 0000000000000004 x22: ffff000000d91000
[    3.249396] x21: ffff000000d90000 x20: 0000000000000000
[    3.249661] x19: ffff00000804bde8 x18: 0000000000000400
[    3.249924] x17: 0000000000000000 x16: 0000000000000000
[    3.250271] x15: ffffffffffffffff x14: 295f5f5f5f6c6176
[    3.250594] x13: 7274705f5f5f5f28 x12: 2073736572646461
[    3.250941] x11: 20746120676e6970 x10: 70616d20582b5720
[    3.251252] x9 : 6572756365736e69 x8 : 3039643030303030
[    3.251519] x7 : 306666666678302f x6 : ffff0000095467b2
[    3.251802] x5 : 0000000000000000 x4 : 0000000000000000
[    3.252060] x3 : 0000000000000000 x2 : ffffffffffffffff
[    3.252323] x1 : 4d151327adc50b00 x0 : 0000000000000000
[    3.252664] Call trace:
[    3.252953]  note_page+0x410/0x420
[    3.253186]  walk_pgd+0x12c/0x238
[    3.253417]  ptdump_check_wx+0x68/0xf8
[    3.253637]  mark_rodata_ro+0x68/0x98
[    3.253847]  kernel_init+0x38/0x160
[    3.254103]  ret_from_fork+0x10/0x18

kprobes allocates a writable executable page with module_alloc() in
order to store executable code.
Reworked to that when allocate a page it sets mode RO. Inspired by
commit 63fef14fc98a ("kprobes/x86: Make insn buffer always ROX and use text_poke()").

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[catalin.marinas@arm.com: removed unnecessary casts]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/probes/kprobes.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index e78c3ef04d95..b5a367d4bba6 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -23,7 +23,9 @@
 #include <linux/slab.h>
 #include <linux/stop_machine.h>
 #include <linux/sched/debug.h>
+#include <linux/set_memory.h>
 #include <linux/stringify.h>
+#include <linux/vmalloc.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 #include <asm/cacheflush.h>
@@ -42,10 +44,21 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 static void __kprobes
 post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
 
+static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
+{
+	void *addrs[1];
+	u32 insns[1];
+
+	addrs[0] = addr;
+	insns[0] = opcode;
+
+	return aarch64_insn_patch_text(addrs, insns, 1);
+}
+
 static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
 {
 	/* prepare insn slot */
-	p->ainsn.api.insn[0] = cpu_to_le32(p->opcode);
+	patch_text(p->ainsn.api.insn, p->opcode);
 
 	flush_icache_range((uintptr_t) (p->ainsn.api.insn),
 			   (uintptr_t) (p->ainsn.api.insn) +
@@ -118,15 +131,15 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	return 0;
 }
 
-static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode)
+void *alloc_insn_page(void)
 {
-	void *addrs[1];
-	u32 insns[1];
+	void *page;
 
-	addrs[0] = (void *)addr;
-	insns[0] = (u32)opcode;
+	page = vmalloc_exec(PAGE_SIZE);
+	if (page)
+		set_memory_ro((unsigned long)page, 1);
 
-	return aarch64_insn_patch_text(addrs, insns, 1);
+	return page;
 }
 
 /* arm kprobe: install breakpoint in text */
-- 
2.17.1

[PATCH AUTOSEL 4.19 05/44] nvme-pci: fix conflicting p2p resource adds

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit 9fe5c59ff6a1e5e26a39b75489a1420e7eaaf0b1 ]

The nvme pci driver had been adding its CMB resource to the P2P DMA
subsystem everytime on on a controller reset. This results in the
following warning:

    ------------[ cut here ]------------
    nvme 0000:00:03.0: Conflicting mapping in same section
    WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380
    ...
    Call Trace:
     pci_p2pdma_add_resource+0x153/0x370
     nvme_reset_work+0x28c/0x17b1 [nvme]
     ? add_timer+0x107/0x1e0
     ? dequeue_entity+0x81/0x660
     ? dequeue_entity+0x3b0/0x660
     ? pick_next_task_fair+0xaf/0x610
     ? __switch_to+0xbc/0x410
     process_one_work+0x1cf/0x350
     worker_thread+0x215/0x3d0
     ? process_one_work+0x350/0x350
     kthread+0x107/0x120
     ? kthread_park+0x80/0x80
     ret_from_fork+0x1f/0x30
    ---[ end trace f7ea76ac6ee72727 ]---
    nvme nvme0: failed to register the CMB

This patch fixes this by registering the CMB with P2P only once.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index d668682f91df..da18e0ac9fa2 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1647,6 +1647,9 @@ static void nvme_map_cmb(struct nvme_dev *dev)
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
 	int bar;
 
+	if (dev->cmb_size)
+		return;
+
 	dev->cmbsz = readl(dev->bar + NVME_REG_CMBSZ);
 	if (!dev->cmbsz)
 		return;
@@ -2129,7 +2132,6 @@ static void nvme_pci_disable(struct nvme_dev *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
 
-	nvme_release_cmb(dev);
 	pci_free_irq_vectors(pdev);
 
 	if (pci_is_enabled(pdev)) {
@@ -2577,6 +2579,7 @@ static void nvme_remove(struct pci_dev *pdev)
 	nvme_stop_ctrl(&dev->ctrl);
 	nvme_remove_namespaces(&dev->ctrl);
 	nvme_dev_disable(dev, true);
+	nvme_release_cmb(dev);
 	nvme_free_host_mem(dev);
 	nvme_dev_remove_admin(dev);
 	nvme_free_queues(dev, 0);
-- 
2.17.1

[PATCH AUTOSEL 4.19 06/44] block: brd: associate with queue until adding disk

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 153fcd5f6d93b8e1e4040b1337f564a10f8d93af ]

brd_free() may be called in failure path on one brd instance which
disk isn't added yet, so release handler of gendisk may free the
associated request_queue early and causes the following use-after-free[1].

This patch fixes this issue by associating gendisk with request_queue
just before adding disk.

[1] KASAN: use-after-free Read in del_timer_syncNon-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
usbcore: registered new interface driver udl
==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20
kernel/locking/lockdep.c:3218
Read of size 8 at addr ffff8801d1b6b540 by task swapper/0/1

CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x244/0x39d lib/dump_stack.c:113
  print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218
  lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844
  del_timer_sync+0xb7/0x270 kernel/time/timer.c:1283
  blk_cleanup_queue+0x413/0x710 block/blk-core.c:809
  brd_free+0x5d/0x71 drivers/block/brd.c:422
  brd_init+0x2eb/0x393 drivers/block/brd.c:518
  do_one_initcall+0x145/0x957 init/main.c:890
  do_initcall_level init/main.c:958 [inline]
  do_initcalls init/main.c:966 [inline]
  do_basic_setup init/main.c:984 [inline]
  kernel_init_freeable+0x5c6/0x6b9 init/main.c:1148
  kernel_init+0x11/0x1ae init/main.c:1068
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:350

Reported-by: syzbot+3701447012fe951dabb2@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/brd.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index df8103dd40ac..c18586fccb6f 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -396,15 +396,14 @@ static struct brd_device *brd_alloc(int i)
 	disk->first_minor	= i * max_part;
 	disk->fops		= &brd_fops;
 	disk->private_data	= brd;
-	disk->queue		= brd->brd_queue;
 	disk->flags		= GENHD_FL_EXT_DEVT;
 	sprintf(disk->disk_name, "ram%d", i);
 	set_capacity(disk, rd_size * 2);
-	disk->queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
+	brd->brd_queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
 
 	/* Tell the block layer that this is not a rotational device */
-	blk_queue_flag_set(QUEUE_FLAG_NONROT, disk->queue);
-	blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, disk->queue);
+	blk_queue_flag_set(QUEUE_FLAG_NONROT, brd->brd_queue);
+	blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, brd->brd_queue);
 
 	return brd;
 
@@ -436,6 +435,7 @@ static struct brd_device *brd_init_one(int i, bool *new)
 
 	brd = brd_alloc(i);
 	if (brd) {
+		brd->brd_disk->queue = brd->brd_queue;
 		add_disk(brd->brd_disk);
 		list_add_tail(&brd->brd_list, &brd_devices);
 	}
@@ -503,8 +503,14 @@ static int __init brd_init(void)
 
 	/* point of no return */
 
-	list_for_each_entry(brd, &brd_devices, brd_list)
+	list_for_each_entry(brd, &brd_devices, brd_list) {
+		/*
+		 * associate with queue just before adding disk for
+		 * avoiding to mess up failure path
+		 */
+		brd->brd_disk->queue = brd->brd_queue;
 		add_disk(brd->brd_disk);
+	}
 
 	blk_register_region(MKDEV(RAMDISK_MAJOR, 0), 1UL << MINORBITS,
 				  THIS_MODULE, brd_probe, NULL, NULL);
-- 
2.17.1

[PATCH AUTOSEL 4.19 07/44] bpf: fix partial copy of map_ptr when dst is scalar

[Sasha Levin]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 0962590e553331db2cc0aef2dc35c57f6300dbbe ]

ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bpf_verifier.h |  3 +++
 kernel/bpf/verifier.c        | 10 ++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index 38b04f559ad3..1fd6fa822d2c 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -50,6 +50,9 @@ struct bpf_reg_state {
 		 *   PTR_TO_MAP_VALUE_OR_NULL
 		 */
 		struct bpf_map *map_ptr;
+
+		/* Max size from any of the above. */
+		unsigned long raw;
 	};
 	/* Fixed part of pointer offset, pointer types only */
 	s32 off;
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 465952a8e465..b046564cc18d 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2762,7 +2762,7 @@ static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
 			dst_reg->umax_value = umax_ptr;
 			dst_reg->var_off = ptr_reg->var_off;
 			dst_reg->off = ptr_reg->off + smin_val;
-			dst_reg->range = ptr_reg->range;
+			dst_reg->raw = ptr_reg->raw;
 			break;
 		}
 		/* A new variable offset is created.  Note that off_reg->off
@@ -2792,10 +2792,11 @@ static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
 		}
 		dst_reg->var_off = tnum_add(ptr_reg->var_off, off_reg->var_off);
 		dst_reg->off = ptr_reg->off;
+		dst_reg->raw = ptr_reg->raw;
 		if (reg_is_pkt_pointer(ptr_reg)) {
 			dst_reg->id = ++env->id_gen;
 			/* something was added to pkt_ptr, set range to zero */
-			dst_reg->range = 0;
+			dst_reg->raw = 0;
 		}
 		break;
 	case BPF_SUB:
@@ -2824,7 +2825,7 @@ static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
 			dst_reg->var_off = ptr_reg->var_off;
 			dst_reg->id = ptr_reg->id;
 			dst_reg->off = ptr_reg->off - smin_val;
-			dst_reg->range = ptr_reg->range;
+			dst_reg->raw = ptr_reg->raw;
 			break;
 		}
 		/* A new variable offset is created.  If the subtrahend is known
@@ -2850,11 +2851,12 @@ static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
 		}
 		dst_reg->var_off = tnum_sub(ptr_reg->var_off, off_reg->var_off);
 		dst_reg->off = ptr_reg->off;
+		dst_reg->raw = ptr_reg->raw;
 		if (reg_is_pkt_pointer(ptr_reg)) {
 			dst_reg->id = ++env->id_gen;
 			/* something was added to pkt_ptr, set range to zero */
 			if (smin_val < 0)
-				dst_reg->range = 0;
+				dst_reg->raw = 0;
 		}
 		break;
 	case BPF_AND:
-- 
2.17.1

[PATCH AUTOSEL 4.19 08/44] net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit 29118ab962d5476fdc65fae312ac38db68092d78 ]

Since hclgevf_reset_wait() is used to wait for the hardware to complete
the reset, it is not necessary to hold the rtnl_lock during
hclgevf_reset_wait(). So this patch releases the lock for the duration
of hclgevf_reset_wait().

Fixes: 6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 9c0091f2addf..57958273945c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1062,6 +1062,8 @@ static int hclgevf_reset(struct hclgevf_dev *hdev)
 	/* bring down the nic to stop any ongoing TX/RX */
 	hclgevf_notify_client(hdev, HNAE3_DOWN_CLIENT);
 
+	rtnl_unlock();
+
 	/* check if VF could successfully fetch the hardware reset completion
 	 * status from the hardware
 	 */
@@ -1073,12 +1075,15 @@ static int hclgevf_reset(struct hclgevf_dev *hdev)
 			ret);
 
 		dev_warn(&hdev->pdev->dev, "VF reset failed, disabling VF!\n");
+		rtnl_lock();
 		hclgevf_notify_client(hdev, HNAE3_UNINIT_CLIENT);
 
 		rtnl_unlock();
 		return ret;
 	}
 
+	rtnl_lock();
+
 	/* now, re-initialize the nic client and ae device*/
 	ret = hclgevf_reset_stack(hdev);
 	if (ret)
-- 
2.17.1

[PATCH AUTOSEL 4.19 09/44] net: hns3: bugfix for rtnl_lock's range in the hclge_reset()

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit a963052e539887df481d4d3a6ad4c92ca6461852 ]

Since hclge_reset_wait() is used to wait for the hardware to complete
the reset, it is not necessary to hold the rtnl_lock during
hclge_reset_wait(). So this patch releases the lock for the duration
of hclge_reset_wait().

Fixes: 6d4fab39533f ("net: hns3: Reset net device with rtnl_lock")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 8577dfc799ad..18056c08f62a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2799,14 +2799,17 @@ static void hclge_reset(struct hclge_dev *hdev)
 	handle = &hdev->vport[0].nic;
 	rtnl_lock();
 	hclge_notify_client(hdev, HNAE3_DOWN_CLIENT);
+	rtnl_unlock();
 
 	if (!hclge_reset_wait(hdev)) {
+		rtnl_lock();
 		hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT);
 		hclge_reset_ae_dev(hdev->ae_dev);
 		hclge_notify_client(hdev, HNAE3_INIT_CLIENT);
 
 		hclge_clear_reset_cause(hdev);
 	} else {
+		rtnl_lock();
 		/* schedule again to check pending resets later */
 		set_bit(hdev->reset_type, &hdev->reset_pending);
 		hclge_reset_task_schedule(hdev);
-- 
2.17.1

[PATCH AUTOSEL 4.19 10/44] net: hns3: bugfix for handling mailbox while the command queue reinitialized

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit 3c88ed1d798da355859ca083d3884a16ce0841f2 ]

In a multi-core machine, the mailbox service and reset service
will be executed at the same time. The reset service will re-initialize
the command queue, before that, the mailbox handler can only get some
invalid messages.

The HCLGE_STATE_CMD_DISABLE flag means that the command queue is not
available and needs to be reinitialized. Therefore, when the mailbox
handler recognizes this flag, it should not process the command.

Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index f34851c91eb3..e08e82020402 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -458,6 +458,12 @@ void hclge_mbx_handler(struct hclge_dev *hdev)
 
 	/* handle all the mailbox requests in the queue */
 	while (!hclge_cmd_crq_empty(&hdev->hw)) {
+		if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) {
+			dev_warn(&hdev->pdev->dev,
+				 "command queue needs re-initializing\n");
+			return;
+		}
+
 		desc = &crq->desc[crq->next_to_use];
 		req = (struct hclge_mbx_vf_to_pf_cmd *)desc->data;
 
-- 
2.17.1

[PATCH AUTOSEL 4.19 11/44] net: hns3: bugfix for the initialization of command queue's spin lock

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit b2f74dbaf12bf59ff35d451005b3cdee78232ff0 ]

The spin lock of the command queue only need to be initialized once
when the driver initializes the command queue. It is not necessary to
initialize the spin lock when resetting. At the same time, the
modification of the queue member should be performed after acquiring
the lock.

Fixes: 3efb960f056d ("net: hns3: Refactor the initialization of command queue")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index ac13cb2b168e..68026a5ad7e7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -304,6 +304,10 @@ int hclge_cmd_queue_init(struct hclge_dev *hdev)
 {
 	int ret;
 
+	/* Setup the lock for command queue */
+	spin_lock_init(&hdev->hw.cmq.csq.lock);
+	spin_lock_init(&hdev->hw.cmq.crq.lock);
+
 	/* Setup the queue entries for use cmd queue */
 	hdev->hw.cmq.csq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
 	hdev->hw.cmq.crq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
@@ -337,18 +341,20 @@ int hclge_cmd_init(struct hclge_dev *hdev)
 	u32 version;
 	int ret;
 
+	spin_lock_bh(&hdev->hw.cmq.csq.lock);
+	spin_lock_bh(&hdev->hw.cmq.crq.lock);
+
 	hdev->hw.cmq.csq.next_to_clean = 0;
 	hdev->hw.cmq.csq.next_to_use = 0;
 	hdev->hw.cmq.crq.next_to_clean = 0;
 	hdev->hw.cmq.crq.next_to_use = 0;
 
-	/* Setup the lock for command queue */
-	spin_lock_init(&hdev->hw.cmq.csq.lock);
-	spin_lock_init(&hdev->hw.cmq.crq.lock);
-
 	hclge_cmd_init_regs(&hdev->hw);
 	clear_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
 
+	spin_unlock_bh(&hdev->hw.cmq.crq.lock);
+	spin_unlock_bh(&hdev->hw.cmq.csq.lock);
+
 	ret = hclge_cmd_query_firmware_version(&hdev->hw, &version);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
-- 
2.17.1

[PATCH AUTOSEL 4.19 12/44] ixgbe: fix MAC anti-spoofing filter after VFLR

[Sasha Levin]

From: Radoslaw Tyl <radoslawx.tyl@intel.com>

[ Upstream commit 6702185c1ffec3421181b5e24491e3fac920cb61 ]

This change resolves a driver bug where the driver is logging a
message that says "Spoofed packets detected". This can occur on the PF
(host) when a VF has VLAN+MACVLAN enabled and is re-started with a
different MAC address.

MAC and VLAN anti-spoofing filters are to be enabled together.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 3c6f01c41b78..eea63a99f29c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -721,8 +721,10 @@ static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
 			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
 					adapter->default_up, vf);
 
-		if (vfinfo->spoofchk_enabled)
+		if (vfinfo->spoofchk_enabled) {
 			hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+			hw->mac.ops.set_mac_anti_spoofing(hw, true, vf);
+		}
 	}
 
 	/* reset multicast table array for vf */
-- 
2.17.1

[PATCH AUTOSEL 4.19 13/44] mm: Fix warning in insert_pfn()

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit f2c57d91b0d96aa13ccff4e3b178038f17b00658 ]

In DAX mode a write pagefault can race with write(2) in the following
way:

CPU0                            CPU1
                                write fault for mapped zero page (hole)
dax_iomap_rw()
  iomap_apply()
    xfs_file_iomap_begin()
      - allocates blocks
    dax_iomap_actor()
      invalidate_inode_pages2_range()
        - invalidates radix tree entries in given range
                                dax_iomap_pte_fault()
                                  grab_mapping_entry()
                                    - no entry found, creates empty
                                  ...
                                  xfs_file_iomap_begin()
                                    - finds already allocated block
                                  ...
                                  vmf_insert_mixed_mkwrite()
                                    - WARNs and does nothing because there
                                      is still zero page mapped in PTE
        unmap_mapping_pages()

This race results in WARN_ON from insert_pfn() and is occasionally
triggered by fstest generic/344. Note that the race is otherwise
harmless as before write(2) on CPU0 is finished, we will invalidate page
tables properly and thus user of mmap will see modified data from
write(2) from that point on. So just restrict the warning only to the
case when the PFN in PTE is not zero page.

Link: http://lkml.kernel.org/r/20180824154542.26872-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index c467102a5cbc..d988bae46479 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1787,10 +1787,15 @@ static int insert_pfn(struct vm_area_struct *vma, unsigned long addr,
 			 * in may not match the PFN we have mapped if the
 			 * mapped PFN is a writeable COW page.  In the mkwrite
 			 * case we are creating a writable PTE for a shared
-			 * mapping and we expect the PFNs to match.
+			 * mapping and we expect the PFNs to match. If they
+			 * don't match, we are likely racing with block
+			 * allocation and mapping invalidation so just skip the
+			 * update.
 			 */
-			if (WARN_ON_ONCE(pte_pfn(*pte) != pfn_t_to_pfn(pfn)))
+			if (pte_pfn(*pte) != pfn_t_to_pfn(pfn)) {
+				WARN_ON_ONCE(!is_zero_pfn(pte_pfn(*pte)));
 				goto out_unlock;
+			}
 			entry = *pte;
 			goto out_mkwrite;
 		} else
-- 
2.17.1

[PATCH AUTOSEL 4.19 14/44] mm/memory_hotplug: make add_memory() take the device_hotplug_lock

[Sasha Levin]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]

add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
	drivers/xen/balloon.c
	arch/powerpc/platforms/powernv/memtrace.c
	drivers/s390/char/sclp_cmd.c
	drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platforms/pseries/hotplug-memory.c        |  2 +-
 drivers/acpi/acpi_memhotplug.c                |  2 +-
 drivers/base/memory.c                         |  9 ++++++--
 drivers/xen/balloon.c                         |  3 +++
 include/linux/memory_hotplug.h                |  1 +
 mm/memory_hotplug.c                           | 22 ++++++++++++++++---
 6 files changed, 32 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index c1578f54c626..79e074eac486 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -702,7 +702,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	nid = memory_add_physaddr_to_nid(lmb->base_addr);
 
 	/* Add the memory */
-	rc = add_memory(nid, lmb->base_addr, block_sz);
+	rc = __add_memory(nid, lmb->base_addr, block_sz);
 	if (rc) {
 		dlpar_remove_device_tree_lmb(lmb);
 		return rc;
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 6b0d3ef7309c..2ccfbb61ca89 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -228,7 +228,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 		if (node < 0)
 			node = memory_add_physaddr_to_nid(info->start_addr);
 
-		result = add_memory(node, info->start_addr, info->length);
+		result = __add_memory(node, info->start_addr, info->length);
 
 		/*
 		 * If the memory block has been used by the kernel, add_memory()
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 817320c7c4c1..40cac122ec73 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -519,15 +519,20 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
 	if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1))
 		return -EINVAL;
 
+	ret = lock_device_hotplug_sysfs();
+	if (ret)
+		goto out;
+
 	nid = memory_add_physaddr_to_nid(phys_addr);
-	ret = add_memory(nid, phys_addr,
-			 MIN_MEMORY_BLOCK_SIZE * sections_per_block);
+	ret = __add_memory(nid, phys_addr,
+			   MIN_MEMORY_BLOCK_SIZE * sections_per_block);
 
 	if (ret)
 		goto out;
 
 	ret = count;
 out:
+	unlock_device_hotplug();
 	return ret;
 }
 
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index e12bb256036f..6bab019a82b1 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -395,7 +395,10 @@ static enum bp_state reserve_additional_memory(void)
 	 * callers drop the mutex before trying again.
 	 */
 	mutex_unlock(&balloon_mutex);
+	/* add_memory_resource() requires the device_hotplug lock */
+	lock_device_hotplug();
 	rc = add_memory_resource(nid, resource, memhp_auto_online);
+	unlock_device_hotplug();
 	mutex_lock(&balloon_mutex);
 
 	if (rc) {
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 34a28227068d..16487052017d 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -322,6 +322,7 @@ static inline void remove_memory(int nid, u64 start, u64 size) {}
 extern void __ref free_area_init_core_hotplug(int nid);
 extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
 		void *arg, int (*func)(struct memory_block *, void *));
+extern int __add_memory(int nid, u64 start, u64 size);
 extern int add_memory(int nid, u64 start, u64 size);
 extern int add_memory_resource(int nid, struct resource *resource, bool online);
 extern int arch_add_memory(int nid, u64 start, u64 size,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 38d94b703e9d..3e42226407c7 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1111,7 +1111,12 @@ static int online_memory_block(struct memory_block *mem, void *arg)
 	return device_online(&mem->dev);
 }
 
-/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+/*
+ * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
+ * and online/offline operations (triggered e.g. by sysfs).
+ *
+ * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG
+ */
 int __ref add_memory_resource(int nid, struct resource *res, bool online)
 {
 	u64 start, size;
@@ -1180,9 +1185,9 @@ int __ref add_memory_resource(int nid, struct resource *res, bool online)
 	mem_hotplug_done();
 	return ret;
 }
-EXPORT_SYMBOL_GPL(add_memory_resource);
 
-int __ref add_memory(int nid, u64 start, u64 size)
+/* requires device_hotplug_lock, see add_memory_resource() */
+int __ref __add_memory(int nid, u64 start, u64 size)
 {
 	struct resource *res;
 	int ret;
@@ -1196,6 +1201,17 @@ int __ref add_memory(int nid, u64 start, u64 size)
 		release_memory_resource(res);
 	return ret;
 }
+
+int add_memory(int nid, u64 start, u64 size)
+{
+	int rc;
+
+	lock_device_hotplug();
+	rc = __add_memory(nid, start, size);
+	unlock_device_hotplug();
+
+	return rc;
+}
 EXPORT_SYMBOL_GPL(add_memory);
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
-- 
2.17.1

[PATCH AUTOSEL 4.19 15/44] reiserfs: propagate errors from fill_with_dentries() properly

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit b10298d56c9623f9b173f19959732d3184b35f4f ]

fill_with_dentries() failed to propagate errors up to
reiserfs_for_each_xattr() properly.  Plumb them through.

Note that reiserfs_for_each_xattr() is only used by
reiserfs_delete_xattrs() and reiserfs_chown_xattrs().  The result of
reiserfs_delete_xattrs() is discarded anyway, the only difference there is
whether a warning is printed to dmesg.  The result of
reiserfs_chown_xattrs() does matter because it can block chowning of the
file to which the xattrs belong; but either way, the resulting state can
have misaligned ownership, so my patch doesn't improve things greatly.

Credit for making me look at this code goes to Al Viro, who pointed out
that the ->actor calling convention is suboptimal and should be changed.

Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/xattr.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 48cdfc81fe10..32d8986c26fb 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -185,6 +185,7 @@ struct reiserfs_dentry_buf {
 	struct dir_context ctx;
 	struct dentry *xadir;
 	int count;
+	int err;
 	struct dentry *dentries[8];
 };
 
@@ -207,6 +208,7 @@ fill_with_dentries(struct dir_context *ctx, const char *name, int namelen,
 
 	dentry = lookup_one_len(name, dbuf->xadir, namelen);
 	if (IS_ERR(dentry)) {
+		dbuf->err = PTR_ERR(dentry);
 		return PTR_ERR(dentry);
 	} else if (d_really_is_negative(dentry)) {
 		/* A directory entry exists, but no file? */
@@ -215,6 +217,7 @@ fill_with_dentries(struct dir_context *ctx, const char *name, int namelen,
 			       "not found for file %pd.\n",
 			       dentry, dbuf->xadir);
 		dput(dentry);
+		dbuf->err = -EIO;
 		return -EIO;
 	}
 
@@ -262,6 +265,10 @@ static int reiserfs_for_each_xattr(struct inode *inode,
 		err = reiserfs_readdir_inode(d_inode(dir), &buf.ctx);
 		if (err)
 			break;
+		if (buf.err) {
+			err = buf.err;
+			break;
+		}
 		if (!buf.count)
 			break;
 		for (i = 0; !err && i < buf.count && buf.dentries[i]; i++) {
-- 
2.17.1

[PATCH AUTOSEL 4.19 16/44] hfs: prevent btree data loss on root split

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit d057c036672f33d43a5f7344acbb08cf3a8a0c09 ]

This bug is triggered whenever hfs_brec_update_parent() needs to split
the root node.  The height of the btree is not increased, which leaves
the new node orphaned and its records lost.  It is not possible for this
to happen on a valid hfs filesystem because the index nodes have fixed
length keys.

For reasons I ignore, the hfs module does have support for a number of
hfsplus features.  A corrupt btree header may report variable length
keys and trigger this bug, so it's better to fix it.

Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/brec.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/hfs/brec.c b/fs/hfs/brec.c
index 9a8772465a90..da25c49203cc 100644
--- a/fs/hfs/brec.c
+++ b/fs/hfs/brec.c
@@ -425,6 +425,10 @@ static int hfs_brec_update_parent(struct hfs_find_data *fd)
 	if (new_node) {
 		__be32 cnid;
 
+		if (!new_node->parent) {
+			hfs_btree_inc_height(tree);
+			new_node->parent = tree->root;
+		}
 		fd->bnode = hfs_bnode_find(tree, new_node->parent);
 		/* create index key and entry */
 		hfs_bnode_read_key(new_node, fd->search_key, 14);
-- 
2.17.1

[PATCH AUTOSEL 4.19 17/44] hfsplus: prevent btree data loss on root split

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit 0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ]

Creating, renaming or deleting a file may cause catalog corruption and
data loss.  This bug is randomly triggered by xfstests generic/027, but
here is a faster reproducer:

  truncate -s 50M fs.iso
  mkfs.hfsplus fs.iso
  mount fs.iso /mnt
  i=100
  while [ $i -le 150 ]; do
    touch /mnt/$i &>/dev/null
    ((++i))
  done
  i=100
  while [ $i -le 150 ]; do
    mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null
    ((++i))
  done
  umount /mnt
  fsck.hfsplus -n fs.iso

The bug is triggered whenever hfs_brec_update_parent() needs to split the
root node.  The height of the btree is not increased, which leaves the new
node orphaned and its records lost.

Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfsplus/brec.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/hfsplus/brec.c b/fs/hfsplus/brec.c
index ed8eacb34452..aa17a392b414 100644
--- a/fs/hfsplus/brec.c
+++ b/fs/hfsplus/brec.c
@@ -429,6 +429,10 @@ static int hfs_brec_update_parent(struct hfs_find_data *fd)
 	if (new_node) {
 		__be32 cnid;
 
+		if (!new_node->parent) {
+			hfs_btree_inc_height(tree);
+			new_node->parent = tree->root;
+		}
 		fd->bnode = hfs_bnode_find(tree, new_node->parent);
 		/* create index key and entry */
 		hfs_bnode_read_key(new_node, fd->search_key, 14);
-- 
2.17.1

[PATCH AUTOSEL 4.19 18/44] mm/gup_benchmark.c: prevent integer overflow in ioctl

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 4b408c74ee5a0b74fc9265c2fe39b0e7dec7c056 ]

The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned
long.  On 32 bit systems we could trick the kernel into allocating fewer
pages than expected.

Link: http://lkml.kernel.org/r/20181025061546.hnhkv33diogf2uis@kili.mountain
Fixes: 64c349f4ae78 ("mm: add infrastructure for get_user_pages_fast() benchmarking")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/gup_benchmark.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/mm/gup_benchmark.c b/mm/gup_benchmark.c
index 7405c9d89d65..7e6f2d2dafb5 100644
--- a/mm/gup_benchmark.c
+++ b/mm/gup_benchmark.c
@@ -23,6 +23,9 @@ static int __gup_benchmark_ioctl(unsigned int cmd,
 	int nr;
 	struct page **pages;
 
+	if (gup->size > ULONG_MAX)
+		return -EINVAL;
+
 	nr_pages = gup->size / PAGE_SIZE;
 	pages = kvcalloc(nr_pages, sizeof(void *), GFP_KERNEL);
 	if (!pages)
-- 
2.17.1

[PATCH AUTOSEL 4.19 19/44] perf unwind: Take pgoff into account when reporting elf to libdwfl

[Sasha Levin]

From: Milian Wolff <milian.wolff@kdab.com>

[ Upstream commit 1fe627da30331024f453faef04d500079b901107 ]

libdwfl parses an ELF file itself and creates mappings for the
individual sections. perf on the other hand sees raw mmap events which
represent individual sections. When we encounter an address pointing
into a mapping with pgoff != 0, we must take that into account and
report the file at the non-offset base address.

This fixes unwinding with libdwfl in some cases. E.g. for a file like:

```

using namespace std;

mutex g_mutex;

double worker()
{
    lock_guard<mutex> guard(g_mutex);
    uniform_real_distribution<double> uniform(-1E5, 1E5);
    default_random_engine engine;
    double s = 0;
    for (int i = 0; i < 1000; ++i) {
        s += norm(complex<double>(uniform(engine), uniform(engine)));
    }
    cout << s << endl;
    return s;
}

int main()
{
    vector<std::future<double>> results;
    for (int i = 0; i < 10000; ++i) {
        results.push_back(async(launch::async, worker));
    }
    return 0;
}
```

Compile it with `g++ -g -O2 -lpthread cpp-locking.cpp  -o cpp-locking`,
then record it with `perf record --call-graph dwarf -e
sched:sched_switch`.

When you analyze it with `perf script` and libunwind, you should see:

```
cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux)
            7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so)
            7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so)
            7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so)
            7f38e42569e5 __GI___libc_malloc+0x115 (inlined)
            7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined)
            7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined)
            7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined)
            7f38e424df36 _IO_new_file_xsputn+0x116 (inlined)
            7f38e4242bfb __GI__IO_fwrite+0xdb (inlined)
            7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c>
            7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl>
            7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25)
            563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined)
            563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking)
            563b9cb506fb double std::__invoke_impl<double, double (*)()>(std::__invoke_other, double (*&&)())+0x2b (inlined)
            563b9cb506fb std::__invoke_result<double (*)()>::type std::__invoke<double (*)()>(double (*&&)())+0x2b (inlined)
            563b9cb506fb decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<double (*)()> >::_M_invoke<0ul>(std::_Index_tuple<0ul>)+0x2b (inlined)
            563b9cb506fb std::thread::_Invoker<std::tuple<double (*)()> >::operator()()+0x2b (inlined)
            563b9cb506fb std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<double>, std::__future_base::_Result_base::_Deleter>, std::thread::_Invoker<std::tuple<double (*)()> >, dou>
            563b9cb506fb std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_>
            563b9cb507e8 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const+0x28 (inlined)
            563b9cb507e8 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)+0x28 (/ssd/milian/>
            7f38e46d24fe __pthread_once_slow+0xbe (/usr/lib/libpthread-2.28.so)
            563b9cb51149 __gthread_once+0xe9 (inlined)
            563b9cb51149 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)>
            563b9cb51149 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool)+0xe9 (inlined)
            563b9cb51149 std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >&&)::{lambda()#1}::op>
            563b9cb51149 void std::__invoke_impl<void, std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double>
            563b9cb51149 std::__invoke_result<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >>
            563b9cb51149 decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_>
            563b9cb51149 std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<dou>
            563b9cb51149 std::thread::_State_impl<std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread>
            7f38e45f0062 execute_native_thread_routine+0x12 (/usr/lib/libstdc++.so.6.0.25)
            7f38e46caa9c start_thread+0xfc (/usr/lib/libpthread-2.28.so)
            7f38e42ccb22 __GI___clone+0x42 (inlined)
```

Before this patch, using libdwfl, you would see:

```
cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux)
            7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so)
        a041161e77950c5c [unknown] ([unknown])
```

With this patch applied, we get a bit further in unwinding:

```
cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux)
        ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux)
            7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so)
            7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so)
            7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so)
            7f38e42569e5 __GI___libc_malloc+0x115 (inlined)
            7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined)
            7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined)
            7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined)
            7f38e424df36 _IO_new_file_xsputn+0x116 (inlined)
            7f38e4242bfb __GI__IO_fwrite+0xdb (inlined)
            7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined)
            7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c>
            7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl>
            7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25)
            563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined)
            563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking)
        6eab825c1ee3e4ff [unknown] ([unknown])
```

Note that the backtrace is still stopping too early, when compared to
the nice results obtained via libunwind. It's unclear so far what the
reason for that is.

Committer note:

Further comment by Milian on the thread started on the Link: tag below:

 ---
The remaining issue is due to a bug in elfutils:

https://sourceware.org/ml/elfutils-devel/2018-q4/msg00089.html

With both patches applied, libunwind and elfutils produce the same output for
the above scenario.
 ---

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181029141644.3907-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/unwind-libdw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c
index 6f318b15950e..5eff9bfc5758 100644
--- a/tools/perf/util/unwind-libdw.c
+++ b/tools/perf/util/unwind-libdw.c
@@ -45,13 +45,13 @@ static int __report_module(struct addr_location *al, u64 ip,
 		Dwarf_Addr s;
 
 		dwfl_module_info(mod, NULL, &s, NULL, NULL, NULL, NULL, NULL);
-		if (s != al->map->start)
+		if (s != al->map->start - al->map->pgoff)
 			mod = 0;
 	}
 
 	if (!mod)
 		mod = dwfl_report_elf(ui->dwfl, dso->short_name,
-				      (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start,
+				      (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start - al->map->pgoff,
 				      false);
 
 	return mod && dwfl_addrmodule(ui->dwfl, ip) == mod ? 0 : -1;
-- 
2.17.1

[PATCH AUTOSEL 4.19 20/44] um: Give start_idle_thread() a return code

[Sasha Levin]

From: Richard Weinberger <richard@nod.at>

[ Upstream commit 7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ]

Fixes:
arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of
non-void function [-Wreturn-type]

longjmp() never returns but gcc still warns that the end of the function
can be reached.
Add a return code and debug aid to detect this impossible case.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/os-Linux/skas/process.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index c94c3bd70ccd..df4a985716eb 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -610,6 +610,11 @@ int start_idle_thread(void *stack, jmp_buf *switch_buf)
 		fatal_sigsegv();
 	}
 	longjmp(*switch_buf, 1);
+
+	/* unreachable */
+	printk(UM_KERN_ERR "impossible long jump!");
+	fatal_sigsegv();
+	return 0;
 }
 
 void initial_thread_cb_skas(void (*proc)(void *), void *arg)
-- 
2.17.1

[PATCH AUTOSEL 4.19 21/44] drm/edid: Add 6 bpc quirk for BOE panel.

[Sasha Levin]

From: "Lee, Shawn C" <shawn.c.lee@intel.com>

[ Upstream commit 922dceff8dc1fb4dafc9af78139ba65671408103 ]

BOE panel (ID: 0x0771) that reports "DFP 1.x compliant TMDS".
But it's 6bpc panel only instead of 8 bpc.

Add panel ID to edid quirk list and set 6 bpc as default to
work around this issue.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540792173-7288-1-git-send-email-shawn.c.lee@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index ff0bfc65a8c1..b506e3622b08 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -122,6 +122,9 @@ static const struct edid_quirk {
 	/* SDC panel of Lenovo B50-80 reports 8 bpc, but is a 6 bpc panel */
 	{ "SDC", 0x3652, EDID_QUIRK_FORCE_6BPC },
 
+	/* BOE model 0x0771 reports 8 bpc, but is a 6 bpc panel */
+	{ "BOE", 0x0771, EDID_QUIRK_FORCE_6BPC },
+
 	/* Belinea 10 15 55 */
 	{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
 	{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
-- 
2.17.1

[PATCH AUTOSEL 4.19 22/44] afs: Handle EIO from delivery function

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 4ac15ea53622272c01954461b4814892b7481b40 ]

Fix afs_deliver_to_call() to handle -EIO being returned by the operation
delivery function, indicating that the call found itself in the wrong
state, by printing an error and aborting the call.

Currently, an assertion failure will occur.  This can happen, say, if the
delivery function falls off the end without calling afs_extract_data() with
the want_more parameter set to false to collect the end of the Rx phase of
a call.

The assertion failure looks like:

	AFS: Assertion failed
	4 == 7 is false
	0x4 == 0x7 is false
	------------[ cut here ]------------
	kernel BUG at fs/afs/rxrpc.c:462!

and is matched in the trace buffer by a line like:

kworker/7:3-3226 [007] ...1 85158.030203: afs_io_error: c=0003be0c r=-5 CM_REPLY

Fixes: 98bf40cd99fc ("afs: Protect call->state changes against signals")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/rxrpc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c
index 77a83790a31f..2543f24d23f8 100644
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -500,7 +500,6 @@ static void afs_deliver_to_call(struct afs_call *call)
 		case -EINPROGRESS:
 		case -EAGAIN:
 			goto out;
-		case -EIO:
 		case -ECONNABORTED:
 			ASSERTCMP(state, ==, AFS_CALL_COMPLETE);
 			goto done;
@@ -509,6 +508,10 @@ static void afs_deliver_to_call(struct afs_call *call)
 			rxrpc_kernel_abort_call(call->net->socket, call->rxcall,
 						abort_code, ret, "KIV");
 			goto local_abort;
+		case -EIO:
+			pr_err("kAFS: Call %u in bad state %u\n",
+			       call->debug_id, state);
+			/* Fall through */
 		case -ENODATA:
 		case -EBADMSG:
 		case -EMSGSIZE:
-- 
2.17.1

[PATCH AUTOSEL 4.19 23/44] platform/x86: intel_telemetry: report debugfs failure

[Sasha Levin]

From: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>

[ Upstream commit 8d98b1ef368feeb7720b8b9b6f3bd93f2ad892bc ]

On some Goldmont based systems such as ASRock J3455M the BIOS may not
enable the IPC1 device that provides access to the PMC and PUNIT. In
such scenarios, the IOSS and PSS resources from the platform device can
not be obtained and result in a invalid telemetry_plt_config which is an
internal data structure that holds platform config and is maintained by
the telemetry platform driver.

This is also applicable to the platforms where the BIOS supports IPC1
device under debug configurations but IPC1 is disabled by user or the
policy.

This change allows user to know the reason for not seeing entries under
/sys/kernel/debug/telemetry/* when there is no apparent failure at boot.

Cc: Matt Turner <matt.turner@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779
Acked-by: Matt Turner <matt.turner@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_telemetry_debugfs.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c
index ffd0474b0531..1423fa8710fd 100644
--- a/drivers/platform/x86/intel_telemetry_debugfs.c
+++ b/drivers/platform/x86/intel_telemetry_debugfs.c
@@ -951,12 +951,16 @@ static int __init telemetry_debugfs_init(void)
 	debugfs_conf = (struct telemetry_debugfs_conf *)id->driver_data;
 
 	err = telemetry_pltconfig_valid();
-	if (err < 0)
+	if (err < 0) {
+		pr_info("Invalid pltconfig, ensure IPC1 device is enabled in BIOS\n");
 		return -ENODEV;
+	}
 
 	err = telemetry_debugfs_check_evts();
-	if (err < 0)
+	if (err < 0) {
+		pr_info("telemetry_debugfs_check_evts failed\n");
 		return -EINVAL;
+	}
 
 	register_pm_notifier(&pm_notifier);
 
-- 
2.17.1

[PATCH AUTOSEL 4.19 24/44] clk: fixed-rate: fix of_node_get-put imbalance

[Sasha Levin]

From: Alan Tull <atull@kernel.org>

[ Upstream commit 52091c256bdcad0d01e2852a63f19cd2cce6af96 ]

When the fixed rate clock is created by devicetree,
of_clk_add_provider is called.  Add a call to
of_clk_del_provider in the remove function to balance
it out.

Signed-off-by: Alan Tull <atull@kernel.org>
Fixes: 435779fe1336 ("clk: fixed-rate: Convert into a module platform driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-fixed-rate.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index b5c46b3f8764..6d6475c32ee5 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -200,6 +200,7 @@ static int of_fixed_clk_remove(struct platform_device *pdev)
 {
 	struct clk *clk = platform_get_drvdata(pdev);
 
+	of_clk_del_provider(pdev->dev.of_node);
 	clk_unregister_fixed_rate(clk);
 
 	return 0;
-- 
2.17.1

[PATCH AUTOSEL 4.19 25/44] perf symbols: Set PLT entry/header sizes properly on Sparc

[Sasha Levin]

From: David Miller <davem@davemloft.net>

[ Upstream commit d6afa561e1471ccfdaf7191230c0c59a37e45a5b ]

Using the sh_entsize for both values isn't correct.  It happens to be
correct on x86...

For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT
section.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: b2f7605076d6 ("perf symbols: Fix plt entry calculation for ARM and AARCH64")
Link: http://lkml.kernel.org/r/20181017.120859.2268840244308635255.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 29770ea61768..6e70cc00c161 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -324,7 +324,17 @@ int dso__synthesize_plt_symbols(struct dso *dso, struct symsrc *ss)
 			plt_entry_size = 16;
 			break;
 
-		default: /* FIXME: s390/alpha/mips/parisc/poperpc/sh/sparc/xtensa need to be checked */
+		case EM_SPARC:
+			plt_header_size = 48;
+			plt_entry_size = 12;
+			break;
+
+		case EM_SPARCV9:
+			plt_header_size = 128;
+			plt_entry_size = 32;
+			break;
+
+		default: /* FIXME: s390/alpha/mips/parisc/poperpc/sh/xtensa need to be checked */
 			plt_header_size = shdr_plt.sh_entsize;
 			plt_entry_size = shdr_plt.sh_entsize;
 			break;
-- 
2.17.1

[PATCH AUTOSEL 4.19 26/44] fs/exofs: fix potential memory leak in mount option parsing

[Sasha Levin]

From: Chengguang Xu <cgxu519@gmx.com>

[ Upstream commit 515f1867addaba49c1c6ac73abfaffbc192c1db4 ]

There are some cases can cause memory leak when parsing
option 'osdname'.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/exofs/super.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 41cf2fbee50d..7d61e3fa378c 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -101,6 +101,7 @@ static int parse_options(char *options, struct exofs_mountopt *opts)
 		token = match_token(p, tokens, args);
 		switch (token) {
 		case Opt_name:
+			kfree(opts->dev_name);
 			opts->dev_name = match_strdup(&args[0]);
 			if (unlikely(!opts->dev_name)) {
 				EXOFS_ERR("Error allocating dev_name");
@@ -866,8 +867,10 @@ static struct dentry *exofs_mount(struct file_system_type *type,
 	int ret;
 
 	ret = parse_options(data, &opts);
-	if (ret)
+	if (ret) {
+		kfree(opts.dev_name);
 		return ERR_PTR(ret);
+	}
 
 	if (!opts.dev_name)
 		opts.dev_name = dev_name;
-- 
2.17.1

[PATCH AUTOSEL 4.19 27/44] clk: samsung: exynos5420: Enable PERIS clocks for suspend

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit b33228029d842269e17bba591609e83ed422005d ]

Ensure that clocks for core SoC modules (including TZPC0..9 modules)
are enabled for suspend/resume cycle. This fixes suspend/resume
support on Exynos5422-based Odroid XU3/XU4 boards.

Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/samsung/clk-exynos5420.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 95e1bf69449b..d4f77c4eb277 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -281,6 +281,7 @@ static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = {
 	{ .offset = GATE_BUS_TOP,		.value = 0xffffffff, },
 	{ .offset = GATE_BUS_DISP1,		.value = 0xffffffff, },
 	{ .offset = GATE_IP_PERIC,		.value = 0xffffffff, },
+	{ .offset = GATE_IP_PERIS,		.value = 0xffffffff, },
 };
 
 static int exynos5420_clk_suspend(void)
-- 
2.17.1

[PATCH AUTOSEL 4.19 28/44] apparmor: Fix uninitialized value in aa_split_fqname

[Sasha Levin]

From: Zubin Mithra <zsm@chromium.org>

[ Upstream commit 250f2da49cb8e582215a65c03f50e8ddf5cd119c ]

Syzkaller reported a OOB-read with the stacktrace below. This occurs
inside __aa_lookupn_ns as `n` is not initialized. `n` is obtained from
aa_splitn_fqname. In cases where `name` is invalid, aa_splitn_fqname
returns without initializing `ns_name` and `ns_len`.

Fix this by always initializing `ns_name` and `ns_len`.

	__dump_stack lib/dump_stack.c:77 [inline]
	dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
	print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
	kasan_report_error mm/kasan/report.c:354 [inline]
	kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
	__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
	memcmp+0xe3/0x160 lib/string.c:861
	strnstr+0x4b/0x70 lib/string.c:934
	__aa_lookupn_ns+0xc1/0x570 security/apparmor/policy_ns.c:209
	aa_lookupn_ns+0x88/0x1e0 security/apparmor/policy_ns.c:240
	aa_fqlookupn_profile+0x1b9/0x1010 security/apparmor/policy.c:468
	fqlookupn_profile+0x80/0xc0 security/apparmor/label.c:1844
	aa_label_strn_parse+0xa3a/0x1230 security/apparmor/label.c:1908
	aa_label_parse+0x42/0x50 security/apparmor/label.c:1943
	aa_change_profile+0x513/0x3510 security/apparmor/domain.c:1362
	apparmor_setprocattr+0xaa4/0x1150 security/apparmor/lsm.c:658
	security_setprocattr+0x66/0xc0 security/security.c:1298
	proc_pid_attr_write+0x301/0x540 fs/proc/base.c:2555
	__vfs_write+0x119/0x9f0 fs/read_write.c:485
	vfs_write+0x1fc/0x560 fs/read_write.c:549
	ksys_write+0x101/0x260 fs/read_write.c:598
	__do_sys_write fs/read_write.c:610 [inline]
	__se_sys_write fs/read_write.c:607 [inline]
	__x64_sys_write+0x73/0xb0 fs/read_write.c:607
	do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
	entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3b0aaf5866bf ("apparmor: add lib fn to find the "split" for fqnames")
Reported-by: syzbot+61e4b490d9d2da591b50@syzkaller.appspotmail.com
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/apparmor/lib.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/security/apparmor/lib.c b/security/apparmor/lib.c
index 974affe50531..76491e7f4177 100644
--- a/security/apparmor/lib.c
+++ b/security/apparmor/lib.c
@@ -90,10 +90,12 @@ const char *aa_splitn_fqname(const char *fqname, size_t n, const char **ns_name,
 	const char *end = fqname + n;
 	const char *name = skipn_spaces(fqname, n);
 
-	if (!name)
-		return NULL;
 	*ns_name = NULL;
 	*ns_len = 0;
+
+	if (!name)
+		return NULL;
+
 	if (name[0] == ':') {
 		char *split = strnchr(&name[1], end - &name[1], ':');
 		*ns_name = skipn_spaces(&name[1], end - &name[1]);
-- 
2.17.1

[PATCH AUTOSEL 4.19 29/44] x86/earlyprintk: Add a force option for pciserial device

[Sasha Levin]

From: Feng Tang <feng.tang@intel.com>

[ Upstream commit d2266bbfa9e3e32e3b642965088ca461bd24a94f ]

The "pciserial" earlyprintk variant helps much on many modern x86
platforms, but unfortunately there are still some platforms with PCI
UART devices which have the wrong PCI class code. In that case, the
current class code check does not allow for them to be used for logging.

Add a sub-option "force" which overrides the class code check and thus
the use of such device can be enforced.

 [ bp: massage formulations. ]

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Stuart R . Anderson" <stuart.r.anderson@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thymo van Beers <thymovanbeers@gmail.com>
Cc: alan@linux.intel.com
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20181002164921.25833-1-feng.tang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |  6 +++-
 arch/x86/kernel/early_printk.c                | 29 ++++++++++++-------
 2 files changed, 24 insertions(+), 11 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 92eb1f42240d..34e6800dea0e 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1063,7 +1063,7 @@
 			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
-			earlyprintk=pciserial,bus:device.function[,baudrate]
+			earlyprintk=pciserial[,force],bus:device.function[,baudrate]
 			earlyprintk=xdbc[xhciController#]
 
 			earlyprintk is useful when the kernel crashes before
@@ -1095,6 +1095,10 @@
 
 			The sclp output can only be used on s390.
 
+			The optional "force" to "pciserial" enables use of a
+			PCI device even when its classcode is not of the
+			UART class.
+
 	edac_report=	[HW,EDAC] Control how to report EDAC event
 			Format: {"on" | "off" | "force"}
 			on: enable EDAC to report H/W event. May be overridden
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 5e801c8c8ce7..374a52fa5296 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -213,8 +213,9 @@ static unsigned int mem32_serial_in(unsigned long addr, int offset)
  * early_pci_serial_init()
  *
  * This function is invoked when the early_printk param starts with "pciserial"
- * The rest of the param should be ",B:D.F,baud" where B, D & F describe the
- * location of a PCI device that must be a UART device.
+ * The rest of the param should be "[force],B:D.F,baud", where B, D & F describe
+ * the location of a PCI device that must be a UART device. "force" is optional
+ * and overrides the use of an UART device with a wrong PCI class code.
  */
 static __init void early_pci_serial_init(char *s)
 {
@@ -224,17 +225,23 @@ static __init void early_pci_serial_init(char *s)
 	u32 classcode, bar0;
 	u16 cmdreg;
 	char *e;
+	int force = 0;
 
-
-	/*
-	 * First, part the param to get the BDF values
-	 */
 	if (*s == ',')
 		++s;
 
 	if (*s == 0)
 		return;
 
+	/* Force the use of an UART device with wrong class code */
+	if (!strncmp(s, "force,", 6)) {
+		force = 1;
+		s += 6;
+	}
+
+	/*
+	 * Part the param to get the BDF values
+	 */
 	bus = (u8)simple_strtoul(s, &e, 16);
 	s = e;
 	if (*s != ':')
@@ -253,7 +260,7 @@ static __init void early_pci_serial_init(char *s)
 		s++;
 
 	/*
-	 * Second, find the device from the BDF
+	 * Find the device from the BDF
 	 */
 	cmdreg = read_pci_config(bus, slot, func, PCI_COMMAND);
 	classcode = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
@@ -264,8 +271,10 @@ static __init void early_pci_serial_init(char *s)
 	 */
 	if (((classcode >> 16 != PCI_CLASS_COMMUNICATION_MODEM) &&
 	     (classcode >> 16 != PCI_CLASS_COMMUNICATION_SERIAL)) ||
-	   (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */
-		return;
+	   (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */ {
+		if (!force)
+			return;
+	}
 
 	/*
 	 * Determine if it is IO or memory mapped
@@ -289,7 +298,7 @@ static __init void early_pci_serial_init(char *s)
 	}
 
 	/*
-	 * Lastly, initialize the hardware
+	 * Initialize the hardware
 	 */
 	if (*s) {
 		if (strcmp(s, "nocfg") == 0)
-- 
2.17.1

[PATCH AUTOSEL 4.19 30/44] platform/x86: acerhdf: Add BIOS entry for Gateway LT31 v1.3307

[Sasha Levin]

From: Paul Gortmaker <paul.gortmaker@windriver.com>

[ Upstream commit 684238d79ad85c5e19a71bb5818e77e329912fbc ]

To fix:

  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!

As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/acerhdf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index ea22591ee66f..53dfe67807e3 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -233,6 +233,7 @@ static const struct bios_settings bios_tbl[] = {
 	{"Gateway", "LT31",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},
 	{"Gateway", "LT31",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},
 	{"Gateway", "LT31",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},
+	{"Gateway", "LT31",   "v1.3307",  0x55, 0x58, {0x9e, 0x00}, 0},
 	/* Packard Bell */
 	{"Packard Bell", "DOA150",  "v0.3104",  0x55, 0x58, {0x21, 0x00}, 0},
 	{"Packard Bell", "DOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},
-- 
2.17.1

[PATCH AUTOSEL 4.19 31/44] clk: meson-axg: pcie: drop the mpll3 clock parent

[Sasha Levin]

From: Yixun Lan <yixun.lan@amlogic.com>

[ Upstream commit 69b93104c7ec5668019caf5d2dbfd0e182df06db ]

We found the PCIe driver doesn't really work with
the mpll3 clock which is actually reserved for debug,
So drop it from the mux list.

Fixes: 33b89db68236 ("clk: meson-axg: add clocks required by pcie driver")
Tested-by: Jianxin Qin <jianxin.qin@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/axg.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 00ce62ad6416..a95152071087 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -700,12 +700,14 @@ static struct clk_regmap axg_pcie_mux = {
 		.offset = HHI_PCIE_PLL_CNTL6,
 		.mask = 0x1,
 		.shift = 2,
+		/* skip the parent mpll3, reserved for debug */
+		.table = (u32[]){ 1 },
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "pcie_mux",
 		.ops = &clk_regmap_mux_ops,
-		.parent_names = (const char *[]){ "mpll3", "pcie_pll" },
-		.num_parents = 2,
+		.parent_names = (const char *[]){ "pcie_pll" },
+		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
 	},
 };
-- 
2.17.1

[PATCH AUTOSEL 4.19 32/44] arm64: percpu: Initialize ret in the default case

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit b5bb425871186303e6936fa2581521bdd1964a58 ]

Clang warns that if the default case is taken, ret will be
uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0

This warning appears several times while building the erofs filesystem.
While it's not strictly wrong, the BUILD_BUG will prevent this from
becoming a true problem. Initialize ret to 0 in the default case right
before the BUILD_BUG to silence all of these warnings.

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/percpu.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h
index 9234013e759e..21a81b59a0cc 100644
--- a/arch/arm64/include/asm/percpu.h
+++ b/arch/arm64/include/asm/percpu.h
@@ -96,6 +96,7 @@ static inline unsigned long __percpu_##op(void *ptr,			\
 		: [val] "Ir" (val));					\
 		break;							\
 	default:							\
+		ret = 0;						\
 		BUILD_BUG();						\
 	}								\
 									\
@@ -125,6 +126,7 @@ static inline unsigned long __percpu_read(void *ptr, int size)
 		ret = READ_ONCE(*(u64 *)ptr);
 		break;
 	default:
+		ret = 0;
 		BUILD_BUG();
 	}
 
@@ -194,6 +196,7 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 		: [val] "r" (val));
 		break;
 	default:
+		ret = 0;
 		BUILD_BUG();
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.19 33/44] clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 2303a9ca693e585a558497ad737728fec97e2b8a ]

CLK_GET_RATE_NOCACHE should only be necessary when the registers
controlling the rate of clock may change outside of CCF. On Amlogic,
it should only be the case for the hdmi pll which is directly controlled
by the display driver (WIP to fix this).

The other plls should not require this flag.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/axg.c     |  1 -
 drivers/clk/meson/gxbb.c    | 12 ++++++++----
 drivers/clk/meson/meson8b.c |  3 ---
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index a95152071087..f24d38c12e09 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -96,7 +96,6 @@ static struct clk_regmap axg_sys_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 86d3ae58e84c..58e4b66bfc55 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -213,7 +213,6 @@ static struct clk_regmap gxbb_fixed_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -276,6 +275,10 @@ static struct clk_regmap gxbb_hdmi_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "hdmi_pll_pre_mult" },
 		.num_parents = 1,
+		/*
+		 * Display directly handle hdmi pll registers ATM, we need
+		 * NOCACHE to keep our view of the clock as accurate as possible
+		 */
 		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
@@ -334,6 +337,10 @@ static struct clk_regmap gxl_hdmi_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
+		/*
+		 * Display directly handle hdmi pll registers ATM, we need
+		 * NOCACHE to keep our view of the clock as accurate as possible
+		 */
 		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
@@ -371,7 +378,6 @@ static struct clk_regmap gxbb_sys_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -418,7 +424,6 @@ static struct clk_regmap gxbb_gp0_pll = {
 		.ops = &meson_clk_pll_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -472,7 +477,6 @@ static struct clk_regmap gxl_gp0_pll = {
 		.ops = &meson_clk_pll_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 7447d96a265f..74697e145dde 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -132,7 +132,6 @@ static struct clk_regmap meson8b_fixed_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -169,7 +168,6 @@ static struct clk_regmap meson8b_vid_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -207,7 +205,6 @@ static struct clk_regmap meson8b_sys_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
-- 
2.17.1

[PATCH AUTOSEL 4.19 34/44] clk: renesas: r9a06g032: Fix UART34567 clock rate

[Sasha Levin]

From: Phil Edworthy <phil.edworthy@renesas.com>

[ Upstream commit ee02950d53eee0d4c7f1c08a35272b77d24b9459 ]

The clock for UARTs 0 through 2 is UART012, the clock for UARTs 3 through
7 is UART34567.
For UART012, we stop the clock driver from changing the clock rate. This
is because the Synopsys UART driver simply sets the reference clock to 16x
the baud rate, but doesn't check if the actual rate is within the required
tolerance. The RZ/N1 clock divider can't provide this (we have to rely on
the UART's internal divider to set the correct clock rate), so you end up
with a clock rate that is way off what you wanted.

In addition, since the clock is shared between multiple UARTs, you don't
want the driver trying to change the clock rate as it may affect the other
UARTs (which may not have been configured yet, so you don't know what baud
rate they will use). Normally, the clock rate is set early on before Linux
to some very high rate that supports all of the clock rates you want.

This change stops the UART34567 clock rate from changing for the same
reasons.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/r9a06g032-clocks.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index a0b6ecdc63dd..6d2b56891559 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -539,7 +539,8 @@ r9a06g032_div_round_rate(struct clk_hw *hw,
 	 * several uarts attached to this divider, and changing this impacts
 	 * everyone.
 	 */
-	if (clk->index == R9A06G032_DIV_UART) {
+	if (clk->index == R9A06G032_DIV_UART ||
+	    clk->index == R9A06G032_DIV_P2_PG) {
 		pr_devel("%s div uart hack!\n", __func__);
 		return clk_get_rate(hw->clk);
 	}
-- 
2.17.1

[PATCH AUTOSEL 4.19 35/44] clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks

[Sasha Levin]

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit c2ff8383cc33c2d9c169e4daf1e37a434c3bb420 ]

On the H6, the MMC module clocks are fixed in the new timing mode,
i.e. they do not have a bit to select the mode. These clocks have
a 2x divider somewhere between the clock and the MMC module.

To be consistent with other SoCs supporting the new timing mode,
we model the 2x divider as a fixed post-divider on the MMC module
clocks.

This patch adds the post-dividers to the MMC clocks, following the
approach on A64.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 43 +++++++++++++++-------------
 1 file changed, 23 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index bdbfe78fe133..3d60f7978506 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -408,26 +408,29 @@ static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
 
 static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
 					    "pll-periph1-2x" };
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_parents, 0x830,
-					0, 4,	/* M */
-					8, 2,	/* N */
-					24, 3,	/* mux */
-					BIT(31),/* gate */
-					0);
-
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_parents, 0x834,
-					0, 4,	/* M */
-					8, 2,	/* N */
-					24, 3,	/* mux */
-					BIT(31),/* gate */
-					0);
-
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_parents, 0x838,
-					0, 4,	/* M */
-					8, 2,	/* N */
-					24, 3,	/* mux */
-					BIT(31),/* gate */
-					0);
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 3,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 3,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 3,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
 
 static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
 static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
-- 
2.17.1

[PATCH AUTOSEL 4.19 36/44] clk: ti: fix OF child-node lookup

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 00a461cc32ec27fa7bd9c874a7b36b0c6c542c12 ]

Fix child-node lookup which by using the wrong OF helper was searching
the whole tree depth-first, something which could end up matching an
unrelated node.

Also fix the related node-reference leaks.

Fixes: 5b385a45e001 ("clk: ti: add support for clkctrl aliases")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clk.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 7d22e1af2247..27e0979b3158 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -129,7 +129,7 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
 void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 {
 	struct ti_dt_clk *c;
-	struct device_node *node;
+	struct device_node *node, *parent;
 	struct clk *clk;
 	struct of_phandle_args clkspec;
 	char buf[64];
@@ -164,8 +164,12 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 			continue;
 
 		node = of_find_node_by_name(NULL, buf);
-		if (num_args)
-			node = of_find_node_by_name(node, "clk");
+		if (num_args) {
+			parent = node;
+			node = of_get_child_by_name(parent, "clk");
+			of_node_put(parent);
+		}
+
 		clkspec.np = node;
 		clkspec.args_count = num_args;
 		for (i = 0; i < num_args; i++) {
@@ -173,11 +177,12 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 			if (ret) {
 				pr_warn("Bad tag in %s at %d: %s\n",
 					c->node_name, i, tags[i]);
+				of_node_put(node);
 				return;
 			}
 		}
 		clk = of_clk_get_from_provider(&clkspec);
-
+		of_node_put(node);
 		if (!IS_ERR(clk)) {
 			c->lk.clk = clk;
 			clkdev_add(&c->lk);
-- 
2.17.1

[PATCH AUTOSEL 4.19 37/44] mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition

[Sasha Levin]

From: Andrea Arcangeli <aarcange@redhat.com>

[ Upstream commit d7c3393413fe7e7dc54498ea200ea94742d61e18 ]

Patch series "migrate_misplaced_transhuge_page race conditions".

Aaron found a new instance of the THP MADV_DONTNEED race against
pmdp_clear_flush* variants, that was apparently left unfixed.

While looking into the race found by Aaron, I may have found two more
issues in migrate_misplaced_transhuge_page.

These race conditions would not cause kernel instability, but they'd
corrupt userland data or leave data non zero after MADV_DONTNEED.

I did only minor testing, and I don't expect to be able to reproduce this
(especially the lack of ->invalidate_range before migrate_page_copy,
requires the latest iommu hardware or infiniband to reproduce).  The last
patch is noop for x86 and it needs further review from maintainers of
archs that implement flush_cache_range() (not in CC yet).

To avoid confusion, it's not the first patch that introduces the bug fixed
in the second patch, even before removing the
pmdp_huge_clear_flush_notify, that _notify suffix was called after
migrate_page_copy already run.

This patch (of 3):

This is a corollary of ced108037c2aa ("thp: fix MADV_DONTNEED vs.  numa
balancing race"), 58ceeb6bec8 ("thp: fix MADV_DONTNEED vs.  MADV_FREE
race") and 5b7abeae3af8c ("thp: fix MADV_DONTNEED vs clear soft dirty
race).

When the above three fixes where posted Dave asked
https://lkml.kernel.org/r/929b3844-aec2-0111-fef7-8002f9d4e2b9@intel.com
but apparently this was missed.

The pmdp_clear_flush* in migrate_misplaced_transhuge_page() was introduced
in a54a407fbf7 ("mm: Close races between THP migration and PMD numa
clearing").

The important part of such commit is only the part where the page lock is
not released until the first do_huge_pmd_numa_page() finished disarming
the pagenuma/protnone.

The addition of pmdp_clear_flush() wasn't beneficial to such commit and
there's no commentary about such an addition either.

I guess the pmdp_clear_flush() in such commit was added just in case for
safety, but it ended up introducing the MADV_DONTNEED race condition found
by Aaron.

At that point in time nobody thought of such kind of MADV_DONTNEED race
conditions yet (they were fixed later) so the code may have looked more
robust by adding the pmdp_clear_flush().

This specific race condition won't destabilize the kernel, but it can
confuse userland because after MADV_DONTNEED the memory won't be zeroed
out.

This also optimizes the code and removes a superfluous TLB flush.

[akpm@linux-foundation.org: reflow comment to 80 cols, fix grammar and typo (beacuse)]
Link: http://lkml.kernel.org/r/20181013002430.698-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/migrate.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/mm/migrate.c b/mm/migrate.c
index 84381b55b2bd..1f634b1563b6 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -2029,15 +2029,26 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
 
 	/*
-	 * Clear the old entry under pagetable lock and establish the new PTE.
-	 * Any parallel GUP will either observe the old page blocking on the
-	 * page lock, block on the page table lock or observe the new page.
-	 * The SetPageUptodate on the new page and page_add_new_anon_rmap
-	 * guarantee the copy is visible before the pagetable update.
+	 * Overwrite the old entry under pagetable lock and establish
+	 * the new PTE. Any parallel GUP will either observe the old
+	 * page blocking on the page lock, block on the page table
+	 * lock or observe the new page. The SetPageUptodate on the
+	 * new page and page_add_new_anon_rmap guarantee the copy is
+	 * visible before the pagetable update.
 	 */
 	flush_cache_range(vma, mmun_start, mmun_end);
 	page_add_anon_rmap(new_page, vma, mmun_start, true);
-	pmdp_huge_clear_flush_notify(vma, mmun_start, pmd);
+	/*
+	 * At this point the pmd is numa/protnone (i.e. non present) and the TLB
+	 * has already been flushed globally.  So no TLB can be currently
+	 * caching this non present pmd mapping.  There's no need to clear the
+	 * pmd before doing set_pmd_at(), nor to flush the TLB after
+	 * set_pmd_at().  Clearing the pmd here would introduce a race
+	 * condition against MADV_DONTNEED, because MADV_DONTNEED only holds the
+	 * mmap_sem for reading.  If the pmd is set to NULL at any given time,
+	 * MADV_DONTNEED won't wait on the pmd lock and it'll skip clearing this
+	 * pmd.
+	 */
 	set_pmd_at(mm, mmun_start, pmd, entry);
 	update_mmu_cache_pmd(vma, address, &entry);
 
@@ -2051,7 +2062,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	 * No need to double call mmu_notifier->invalidate_range() callback as
 	 * the above pmdp_huge_clear_flush_notify() did already call it.
 	 */
-	mmu_notifier_invalidate_range_only_end(mm, mmun_start, mmun_end);
+	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
 
 	/* Take an "isolate" reference and put new page on the LRU. */
 	get_page(new_page);
-- 
2.17.1

[PATCH AUTOSEL 4.19 38/44] mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()

[Sasha Levin]

From: Andrea Arcangeli <aarcange@redhat.com>

[ Upstream commit 7066f0f933a1fd707bb38781866657769cff7efc ]

change_huge_pmd() after arming the numa/protnone pmd doesn't flush the TLB
right away.  do_huge_pmd_numa_page() flushes the TLB before calling
migrate_misplaced_transhuge_page().  By the time do_huge_pmd_numa_page()
runs some CPU could still access the page through the TLB.

change_huge_pmd() before arming the numa/protnone transhuge pmd calls
mmu_notifier_invalidate_range_start().  So there's no need of
mmu_notifier_invalidate_range_start()/mmu_notifier_invalidate_range_only_end()
sequence in migrate_misplaced_transhuge_page() too, because by the time
migrate_misplaced_transhuge_page() runs, the pmd mapping has already been
invalidated in the secondary MMUs.  It has to or if a secondary MMU can
still write to the page, the migrate_page_copy() would lose data.

However an explicit mmu_notifier_invalidate_range() is needed before
migrate_misplaced_transhuge_page() starts copying the data of the
transhuge page or the below can happen for MMU notifier users sharing the
primary MMU pagetables and only implementing ->invalidate_range:

CPU0		CPU1		GPU sharing linux pagetables using
                                only ->invalidate_range
-----------	------------	---------
				GPU secondary MMU writes to the page
				mapped by the transhuge pmd
change_pmd_range()
mmu..._range_start()
->invalidate_range_start() noop
change_huge_pmd()
set_pmd_at(numa/protnone)
pmd_unlock()
		do_huge_pmd_numa_page()
		CPU TLB flush globally (1)
		CPU cannot write to page
		migrate_misplaced_transhuge_page()
				GPU writes to the page...
		migrate_page_copy()
				...GPU stops writing to the page
CPU TLB flush (2)
mmu..._range_end() (3)
->invalidate_range_stop() noop
->invalidate_range()
				GPU secondary MMU is invalidated
				and cannot write to the page anymore
				(too late)

Just like we need a CPU TLB flush (1) because the TLB flush (2) arrives
too late, we also need a mmu_notifier_invalidate_range() before calling
migrate_misplaced_transhuge_page(), because the ->invalidate_range() in
(3) also arrives too late.

This requirement is the result of the lazy optimization in
change_huge_pmd() that releases the pmd_lock without first flushing the
TLB and without first calling mmu_notifier_invalidate_range().

Even converting the removed mmu_notifier_invalidate_range_only_end() into
a mmu_notifier_invalidate_range_end() would not have been enough to fix
this, because it run after migrate_page_copy().

After the hugepage data copy is done migrate_misplaced_transhuge_page()
can proceed and call set_pmd_at without having to flush the TLB nor any
secondary MMUs because the secondary MMU invalidate, just like the CPU TLB
flush, has to happen before the migrate_page_copy() is called or it would
be a bug in the first place (and it was for drivers using
->invalidate_range()).

KVM is unaffected because it doesn't implement ->invalidate_range().

The standard PAGE_SIZEd migrate_misplaced_page is less accelerated and
uses the generic migrate_pages which transitions the pte from
numa/protnone to a migration entry in try_to_unmap_one() and flushes TLBs
and all mmu notifiers there before copying the page.

Link: http://lkml.kernel.org/r/20181013002430.698-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/huge_memory.c | 14 +++++++++++++-
 mm/migrate.c     | 19 ++++++-------------
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index deed97fba979..a71a5172104c 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1562,8 +1562,20 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf, pmd_t pmd)
 	 * We are not sure a pending tlb flush here is for a huge page
 	 * mapping or not. Hence use the tlb range variant
 	 */
-	if (mm_tlb_flush_pending(vma->vm_mm))
+	if (mm_tlb_flush_pending(vma->vm_mm)) {
 		flush_tlb_range(vma, haddr, haddr + HPAGE_PMD_SIZE);
+		/*
+		 * change_huge_pmd() released the pmd lock before
+		 * invalidating the secondary MMUs sharing the primary
+		 * MMU pagetables (with ->invalidate_range()). The
+		 * mmu_notifier_invalidate_range_end() (which
+		 * internally calls ->invalidate_range()) in
+		 * change_pmd_range() will run after us, so we can't
+		 * rely on it here and we need an explicit invalidate.
+		 */
+		mmu_notifier_invalidate_range(vma->vm_mm, haddr,
+					      haddr + HPAGE_PMD_SIZE);
+	}
 
 	/*
 	 * Migrate the THP to the requested node, returns with page unlocked
diff --git a/mm/migrate.c b/mm/migrate.c
index 1f634b1563b6..1637a32f3dd7 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1973,8 +1973,8 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	int isolated = 0;
 	struct page *new_page = NULL;
 	int page_lru = page_is_file_cache(page);
-	unsigned long mmun_start = address & HPAGE_PMD_MASK;
-	unsigned long mmun_end = mmun_start + HPAGE_PMD_SIZE;
+	unsigned long start = address & HPAGE_PMD_MASK;
+	unsigned long end = start + HPAGE_PMD_SIZE;
 
 	new_page = alloc_pages_node(node,
 		(GFP_TRANSHUGE_LIGHT | __GFP_THISNODE),
@@ -2001,11 +2001,9 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	WARN_ON(PageLRU(new_page));
 
 	/* Recheck the target PMD */
-	mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
 	ptl = pmd_lock(mm, pmd);
 	if (unlikely(!pmd_same(*pmd, entry) || !page_ref_freeze(page, 2))) {
 		spin_unlock(ptl);
-		mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
 
 		/* Reverse changes made by migrate_page_copy() */
 		if (TestClearPageActive(new_page))
@@ -2036,8 +2034,8 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	 * new page and page_add_new_anon_rmap guarantee the copy is
 	 * visible before the pagetable update.
 	 */
-	flush_cache_range(vma, mmun_start, mmun_end);
-	page_add_anon_rmap(new_page, vma, mmun_start, true);
+	flush_cache_range(vma, start, end);
+	page_add_anon_rmap(new_page, vma, start, true);
 	/*
 	 * At this point the pmd is numa/protnone (i.e. non present) and the TLB
 	 * has already been flushed globally.  So no TLB can be currently
@@ -2049,7 +2047,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	 * MADV_DONTNEED won't wait on the pmd lock and it'll skip clearing this
 	 * pmd.
 	 */
-	set_pmd_at(mm, mmun_start, pmd, entry);
+	set_pmd_at(mm, start, pmd, entry);
 	update_mmu_cache_pmd(vma, address, &entry);
 
 	page_ref_unfreeze(page, 2);
@@ -2058,11 +2056,6 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	set_page_owner_migrate_reason(new_page, MR_NUMA_MISPLACED);
 
 	spin_unlock(ptl);
-	/*
-	 * No need to double call mmu_notifier->invalidate_range() callback as
-	 * the above pmdp_huge_clear_flush_notify() did already call it.
-	 */
-	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
 
 	/* Take an "isolate" reference and put new page on the LRU. */
 	get_page(new_page);
@@ -2086,7 +2079,7 @@ int migrate_misplaced_transhuge_page(struct mm_struct *mm,
 	ptl = pmd_lock(mm, pmd);
 	if (pmd_same(*pmd, entry)) {
 		entry = pmd_modify(entry, vma->vm_page_prot);
-		set_pmd_at(mm, mmun_start, pmd, entry);
+		set_pmd_at(mm, start, pmd, entry);
 		update_mmu_cache_pmd(vma, address, &entry);
 	}
 	spin_unlock(ptl);
-- 
2.17.1

[PATCH AUTOSEL 4.19 39/44] mm: calculate deferred pages after skipping mirrored memory

[Sasha Levin]

From: Pavel Tatashin <pasha.tatashin@oracle.com>

[ Upstream commit d3035be4ce2345d98633a45f93a74e526e94b802 ]

update_defer_init() should be called only when struct page is about to be
initialized. Because it counts number of initialized struct pages, but
there we may skip struct pages if there is some mirrored memory.

So move, update_defer_init() after checking for mirrored memory.

Also, rename update_defer_init() to defer_init() and reverse the return
boolean to emphasize that this is a boolean function, that tells that the
reset of memmap initialization should be deferred.

Make this function self-contained: do not pass number of already
initialized pages in this zone by using static counters.

I found this bug by reading the code.  The effect is that fewer than
expected struct pages are initialized early in boot, and it is possible
that in some corner cases we may fail to boot when mirrored pages are
used.  The deferred on demand code should somewhat mitigate this.  But
this still brings some inconsistencies compared to when booting without
mirrored pages, so it is better to fix.

[pasha.tatashin@oracle.com: add comment about defer_init's lack of locking]
  Link: http://lkml.kernel.org/r/20180726193509.3326-3-pasha.tatashin@oracle.com
[akpm@linux-foundation.org: make defer_init non-inline, __meminit]
Link: http://lkml.kernel.org/r/20180724235520.10200-3-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page_alloc.c | 45 +++++++++++++++++++++++++--------------------
 1 file changed, 25 insertions(+), 20 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e2ef1c17942f..63f990b73750 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -306,24 +306,33 @@ static inline bool __meminit early_page_uninitialised(unsigned long pfn)
 }
 
 /*
- * Returns false when the remaining initialisation should be deferred until
+ * Returns true when the remaining initialisation should be deferred until
  * later in the boot cycle when it can be parallelised.
  */
-static inline bool update_defer_init(pg_data_t *pgdat,
-				unsigned long pfn, unsigned long zone_end,
-				unsigned long *nr_initialised)
+static bool __meminit
+defer_init(int nid, unsigned long pfn, unsigned long end_pfn)
 {
+	static unsigned long prev_end_pfn, nr_initialised;
+
+	/*
+	 * prev_end_pfn static that contains the end of previous zone
+	 * No need to protect because called very early in boot before smp_init.
+	 */
+	if (prev_end_pfn != end_pfn) {
+		prev_end_pfn = end_pfn;
+		nr_initialised = 0;
+	}
+
 	/* Always populate low zones for address-constrained allocations */
-	if (zone_end < pgdat_end_pfn(pgdat))
-		return true;
-	(*nr_initialised)++;
-	if ((*nr_initialised > pgdat->static_init_pgcnt) &&
-	    (pfn & (PAGES_PER_SECTION - 1)) == 0) {
-		pgdat->first_deferred_pfn = pfn;
+	if (end_pfn < pgdat_end_pfn(NODE_DATA(nid)))
 		return false;
+	nr_initialised++;
+	if ((nr_initialised > NODE_DATA(nid)->static_init_pgcnt) &&
+	    (pfn & (PAGES_PER_SECTION - 1)) == 0) {
+		NODE_DATA(nid)->first_deferred_pfn = pfn;
+		return true;
 	}
-
-	return true;
+	return false;
 }
 #else
 static inline bool early_page_uninitialised(unsigned long pfn)
@@ -331,11 +340,9 @@ static inline bool early_page_uninitialised(unsigned long pfn)
 	return false;
 }
 
-static inline bool update_defer_init(pg_data_t *pgdat,
-				unsigned long pfn, unsigned long zone_end,
-				unsigned long *nr_initialised)
+static inline bool defer_init(int nid, unsigned long pfn, unsigned long end_pfn)
 {
-	return true;
+	return false;
 }
 #endif
 
@@ -5459,9 +5466,7 @@ void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
 		struct vmem_altmap *altmap)
 {
 	unsigned long end_pfn = start_pfn + size;
-	pg_data_t *pgdat = NODE_DATA(nid);
 	unsigned long pfn;
-	unsigned long nr_initialised = 0;
 	struct page *page;
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 	struct memblock_region *r = NULL, *tmp;
@@ -5489,8 +5494,6 @@ void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
 			continue;
 		if (!early_pfn_in_nid(pfn, nid))
 			continue;
-		if (!update_defer_init(pgdat, pfn, end_pfn, &nr_initialised))
-			break;
 
 #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
 		/*
@@ -5513,6 +5516,8 @@ void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
 			}
 		}
 #endif
+		if (defer_init(nid, pfn, end_pfn))
+			break;
 
 not_early:
 		page = pfn_to_page(pfn);
-- 
2.17.1

[PATCH AUTOSEL 4.19 40/44] mm: don't raise MEMCG_OOM event due to failed high-order allocation

[Sasha Levin]

From: Roman Gushchin <guro@fb.com>

[ Upstream commit 7a1adfddaf0d11a39fdcaf6e82a88e9c0586e08b ]

It was reported that on some of our machines containers were restarted
with OOM symptoms without an obvious reason.  Despite there were almost no
memory pressure and plenty of page cache, MEMCG_OOM event was raised
occasionally, causing the container management software to think, that OOM
has happened.  However, no tasks have been killed.

The following investigation showed that the problem is caused by a failing
attempt to charge a high-order page.  In such case, the OOM killer is
never invoked.  As shown below, it can happen under conditions, which are
very far from a real OOM: e.g.  there is plenty of clean page cache and no
memory pressure.

There is no sense in raising an OOM event in this case, as it might
confuse a user and lead to wrong and excessive actions (e.g.  restart the
workload, as in my case).

Let's look at the charging path in try_charge().  If the memory usage is
about memory.max, which is absolutely natural for most memory cgroups, we
try to reclaim some pages.  Even if we were able to reclaim enough memory
for the allocation, the following check can fail due to a race with
another concurrent allocation:

    if (mem_cgroup_margin(mem_over_limit) >= nr_pages)
        goto retry;

For regular pages the following condition will save us from triggering
the OOM:

   if (nr_reclaimed && nr_pages <= (1 << PAGE_ALLOC_COSTLY_ORDER))
       goto retry;

But for high-order allocation this condition will intentionally fail.  The
reason behind is that we'll likely fall to regular pages anyway, so it's
ok and even preferred to return ENOMEM.

In this case the idea of raising MEMCG_OOM looks dubious.

Fix this by moving MEMCG_OOM raising to mem_cgroup_oom() after allocation
order check, so that the event won't be raised for high order allocations.
This change doesn't affect regular pages allocation and charging.

Link: http://lkml.kernel.org/r/20181004214050.7417-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/admin-guide/cgroup-v2.rst | 4 ++++
 mm/memcontrol.c                         | 4 ++--
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 184193bcb262..5d9939388a78 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -1127,6 +1127,10 @@ PAGE_SIZE multiple when read back.
 		disk readahead.  For now OOM in memory cgroup kills
 		tasks iff shortage has happened inside page fault.
 
+		This event is not raised if the OOM killer is not
+		considered as an option, e.g. for failed high-order
+		allocations.
+
 	  oom_kill
 		The number of processes belonging to this cgroup
 		killed by any kind of OOM killer.
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e79cb59552d9..07c7af6f5e59 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1669,6 +1669,8 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
 	if (order > PAGE_ALLOC_COSTLY_ORDER)
 		return OOM_SKIPPED;
 
+	memcg_memory_event(memcg, MEMCG_OOM);
+
 	/*
 	 * We are in the middle of the charge context here, so we
 	 * don't want to block when potentially sitting on a callstack
@@ -2250,8 +2252,6 @@ static int try_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
 	if (fatal_signal_pending(current))
 		goto force;
 
-	memcg_memory_event(mem_over_limit, MEMCG_OOM);
-
 	/*
 	 * keep retrying as long as the memcg oom killer is able to make
 	 * a forward progress or bypass the charge if the oom killer
-- 
2.17.1

[PATCH AUTOSEL 4.19 41/44] mm/vmstat.c: assert that vmstat_text is in sync with stat_items_size

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit f0ecf25a093fc0589f0a6bc4c1ea068bbb67d220 ]

Having two gigantic arrays that must manually be kept in sync, including
ifdefs, isn't exactly robust.  To make it easier to catch such issues in
the future, add a BUILD_BUG_ON().

Link: http://lkml.kernel.org/r/20181001143138.95119-3-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/vmstat.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/mm/vmstat.c b/mm/vmstat.c
index 7878da76abf2..b678c607e490 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1663,6 +1663,8 @@ static void *vmstat_start(struct seq_file *m, loff_t *pos)
 	stat_items_size += sizeof(struct vm_event_state);
 #endif
 
+	BUILD_BUG_ON(stat_items_size !=
+		     ARRAY_SIZE(vmstat_text) * sizeof(unsigned long));
 	v = kmalloc(stat_items_size, GFP_KERNEL);
 	m->private = v;
 	if (!v)
-- 
2.17.1

[PATCH AUTOSEL 4.19 42/44] userfaultfd: allow get_mempolicy(MPOL_F_NODE|MPOL_F_ADDR) to trigger userfaults

[Sasha Levin]

From: Andrea Arcangeli <aarcange@redhat.com>

[ Upstream commit 3b9aadf7278d16d7bed4d5d808501065f70898d8 ]

get_mempolicy(MPOL_F_NODE|MPOL_F_ADDR) called a get_user_pages that would
not be waiting for userfaults before failing and it would hit on a SIGBUS
instead.  Using get_user_pages_locked/unlocked instead will allow
get_mempolicy to allow userfaults to resolve the fault and fill the hole,
before grabbing the node id of the page.

If the user calls get_mempolicy() with MPOL_F_ADDR | MPOL_F_NODE for an
address inside an area managed by uffd and there is no page at that
address, the page allocation from within get_mempolicy() will fail
because get_user_pages() does not allow for page fault retry required
for uffd; the user will get SIGBUS.

With this patch, the page fault will be resolved by the uffd and the
get_mempolicy() will continue normally.

Background:

Via code review, previously the syscall would have returned -EFAULT
(vm_fault_to_errno), now it will block and wait for an userfault (if
it's waken before the fault is resolved it'll still -EFAULT).

This way get_mempolicy will give a chance to an "unaware" app to be
compliant with userfaults.

The reason this visible change is that becoming "userfault compliant"
cannot regress anything: all other syscalls including read(2)/write(2)
had to become "userfault compliant" long time ago (that's one of the
things userfaultfd can do that PROT_NONE and trapping segfaults can't).

So this is just one more syscall that become "userfault compliant" like
all other major ones already were.

This has been happening on virtio-bridge dpdk process which just called
get_mempolicy on the guest space post live migration, but before the
memory had a chance to be migrated to destination.

I didn't run an strace to be able to show the -EFAULT going away, but
I've the confirmation of the below debug aid information (only visible
with CONFIG_DEBUG_VM=y) going away with the patch:

    [20116.371461] FAULT_FLAG_ALLOW_RETRY missing 0
    [20116.371464] CPU: 1 PID: 13381 Comm: vhost-events Not tainted 4.17.12-200.fc28.x86_64 #1
    [20116.371465] Hardware name: LENOVO 20FAS2BN0A/20FAS2BN0A, BIOS N1CET54W (1.22 ) 02/10/2017
    [20116.371466] Call Trace:
    [20116.371473]  dump_stack+0x5c/0x80
    [20116.371476]  handle_userfault.cold.37+0x1b/0x22
    [20116.371479]  ? remove_wait_queue+0x20/0x60
    [20116.371481]  ? poll_freewait+0x45/0xa0
    [20116.371483]  ? do_sys_poll+0x31c/0x520
    [20116.371485]  ? radix_tree_lookup_slot+0x1e/0x50
    [20116.371488]  shmem_getpage_gfp+0xce7/0xe50
    [20116.371491]  ? page_add_file_rmap+0x1a/0x2c0
    [20116.371493]  shmem_fault+0x78/0x1e0
    [20116.371495]  ? filemap_map_pages+0x3a1/0x450
    [20116.371498]  __do_fault+0x1f/0xc0
    [20116.371500]  __handle_mm_fault+0xe2e/0x12f0
    [20116.371502]  handle_mm_fault+0xda/0x200
    [20116.371504]  __get_user_pages+0x238/0x790
    [20116.371506]  get_user_pages+0x3e/0x50
    [20116.371510]  kernel_get_mempolicy+0x40b/0x700
    [20116.371512]  ? vfs_write+0x170/0x1a0
    [20116.371515]  __x64_sys_get_mempolicy+0x21/0x30
    [20116.371517]  do_syscall_64+0x5b/0x160
    [20116.371520]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The above harmless debug message (not a kernel crash, just a
dump_stack()) is shown with CONFIG_DEBUG_VM=y to more quickly identify
and improve kernel spots that may have to become "userfaultfd
compliant" like this one (without having to run an strace and search
for syscall misbehavior).  Spots like the above are more closer to a
kernel bug for the non-cooperative usages that Mike focuses on, than
for for dpdk qemu-cooperative usages that reproduced it, but it's still
nicer to get this fixed for dpdk too.

The part of the patch that caused me to think is only the
implementation issue of mpol_get, but it looks like it should work safe
no matter the kind of mempolicy structure that is (the default static
policy also starts at 1 so it'll go to 2 and back to 1 without crashing
everything at 0).

[rppt@linux.vnet.ibm.com: changelog addition]
  http://lkml.kernel.org/r/20180904073718.GA26916@rapoport-lnx
Link: http://lkml.kernel.org/r/20180831214848.23676-1-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mempolicy.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index da858f794eb6..2e76a8f65e94 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -797,16 +797,19 @@ static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes)
 	}
 }
 
-static int lookup_node(unsigned long addr)
+static int lookup_node(struct mm_struct *mm, unsigned long addr)
 {
 	struct page *p;
 	int err;
 
-	err = get_user_pages(addr & PAGE_MASK, 1, 0, &p, NULL);
+	int locked = 1;
+	err = get_user_pages_locked(addr & PAGE_MASK, 1, 0, &p, &locked);
 	if (err >= 0) {
 		err = page_to_nid(p);
 		put_page(p);
 	}
+	if (locked)
+		up_read(&mm->mmap_sem);
 	return err;
 }
 
@@ -817,7 +820,7 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
 	int err;
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma = NULL;
-	struct mempolicy *pol = current->mempolicy;
+	struct mempolicy *pol = current->mempolicy, *pol_refcount = NULL;
 
 	if (flags &
 		~(unsigned long)(MPOL_F_NODE|MPOL_F_ADDR|MPOL_F_MEMS_ALLOWED))
@@ -857,7 +860,16 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
 
 	if (flags & MPOL_F_NODE) {
 		if (flags & MPOL_F_ADDR) {
-			err = lookup_node(addr);
+			/*
+			 * Take a refcount on the mpol, lookup_node()
+			 * wil drop the mmap_sem, so after calling
+			 * lookup_node() only "pol" remains valid, "vma"
+			 * is stale.
+			 */
+			pol_refcount = pol;
+			vma = NULL;
+			mpol_get(pol);
+			err = lookup_node(mm, addr);
 			if (err < 0)
 				goto out;
 			*policy = err;
@@ -892,7 +904,9 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
  out:
 	mpol_cond_put(pol);
 	if (vma)
-		up_read(&current->mm->mmap_sem);
+		up_read(&mm->mmap_sem);
+	if (pol_refcount)
+		mpol_put(pol_refcount);
 	return err;
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.19 43/44] mm: don't miss the last page because of round-off error

[Sasha Levin]

From: Roman Gushchin <guro@fb.com>

[ Upstream commit 68600f623d69da428c6163275f97ca126e1a8ec5 ]

I've noticed, that dying memory cgroups are often pinned in memory by a
single pagecache page.  Even under moderate memory pressure they sometimes
stayed in such state for a long time.  That looked strange.

My investigation showed that the problem is caused by applying the LRU
pressure balancing math:

  scan = div64_u64(scan * fraction[lru], denominator),

where

  denominator = fraction[anon] + fraction[file] + 1.

Because fraction[lru] is always less than denominator, if the initial scan
size is 1, the result is always 0.

This means the last page is not scanned and has
no chances to be reclaimed.

Fix this by rounding up the result of the division.

In practice this change significantly improves the speed of dying cgroups
reclaim.

[guro@fb.com: prevent double calculation of DIV64_U64_ROUND_UP() arguments]
  Link: http://lkml.kernel.org/r/20180829213311.GA13501@castle
Link: http://lkml.kernel.org/r/20180827162621.30187-3-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/math64.h | 3 +++
 mm/vmscan.c            | 6 ++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/linux/math64.h b/include/linux/math64.h
index 837f2f2d1d34..bb2c84afb80c 100644
--- a/include/linux/math64.h
+++ b/include/linux/math64.h
@@ -281,4 +281,7 @@ static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 divisor)
 }
 #endif /* mul_u64_u32_div */
 
+#define DIV64_U64_ROUND_UP(ll, d)	\
+	({ u64 _tmp = (d); div64_u64((ll) + _tmp - 1, _tmp); })
+
 #endif /* _LINUX_MATH64_H */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index c5ef7240cbcb..961401c46334 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2456,9 +2456,11 @@ static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
 			/*
 			 * Scan types proportional to swappiness and
 			 * their relative recent reclaim efficiency.
+			 * Make sure we don't miss the last page
+			 * because of a round-off error.
 			 */
-			scan = div64_u64(scan * fraction[file],
-					 denominator);
+			scan = DIV64_U64_ROUND_UP(scan * fraction[file],
+						  denominator);
 			break;
 		case SCAN_FILE:
 		case SCAN_ANON:
-- 
2.17.1

[PATCH AUTOSEL 4.19 44/44] mm: don't warn about large allocations for slab

[Sasha Levin]

From: Dmitry Vyukov <dvyukov@google.com>

[ Upstream commit 61448479a9f2c954cde0cfe778cb6bec5d0a748d ]

Slub does not call kmalloc_slab() for sizes > KMALLOC_MAX_CACHE_SIZE,
instead it falls back to kmalloc_large().

For slab KMALLOC_MAX_CACHE_SIZE == KMALLOC_MAX_SIZE and it calls
kmalloc_slab() for all allocations relying on NULL return value for
over-sized allocations.

This inconsistency leads to unwanted warnings from kmalloc_slab() for
over-sized allocations for slab.  Returning NULL for failed allocations is
the expected behavior.

Make slub and slab code consistent by checking size >
KMALLOC_MAX_CACHE_SIZE in slab before calling kmalloc_slab().

While we are here also fix the check in kmalloc_slab().  We should check
against KMALLOC_MAX_CACHE_SIZE rather than KMALLOC_MAX_SIZE.  It all kinda
worked because for slab the constants are the same, and slub always checks
the size against KMALLOC_MAX_CACHE_SIZE before kmalloc_slab().  But if we
get there with size > KMALLOC_MAX_CACHE_SIZE anyhow bad things will
happen.  For example, in case of a newly introduced bug in slub code.

Also move the check in kmalloc_slab() from function entry to the size >
192 case.  This partially compensates for the additional check in slab
code and makes slub code a bit faster (at least theoretically).

Also drop __GFP_NOWARN in the warning check.  This warning means a bug in
slab code itself, user-passed flags have nothing to do with it.

Nothing of this affects slob.

Link: http://lkml.kernel.org/r/20180927171502.226522-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+87829a10073277282ad1@syzkaller.appspotmail.com
Reported-by: syzbot+ef4e8fc3a06e9019bb40@syzkaller.appspotmail.com
Reported-by: syzbot+6e438f4036df52cbb863@syzkaller.appspotmail.com
Reported-by: syzbot+8574471d8734457d98aa@syzkaller.appspotmail.com
Reported-by: syzbot+af1504df0807a083dbd9@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slab.c        |  4 ++++
 mm/slab_common.c | 12 ++++++------
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/mm/slab.c b/mm/slab.c
index aa76a70e087e..d73c7a4820a4 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3675,6 +3675,8 @@ __do_kmalloc_node(size_t size, gfp_t flags, int node, unsigned long caller)
 	struct kmem_cache *cachep;
 	void *ret;
 
+	if (unlikely(size > KMALLOC_MAX_CACHE_SIZE))
+		return NULL;
 	cachep = kmalloc_slab(size, flags);
 	if (unlikely(ZERO_OR_NULL_PTR(cachep)))
 		return cachep;
@@ -3710,6 +3712,8 @@ static __always_inline void *__do_kmalloc(size_t size, gfp_t flags,
 	struct kmem_cache *cachep;
 	void *ret;
 
+	if (unlikely(size > KMALLOC_MAX_CACHE_SIZE))
+		return NULL;
 	cachep = kmalloc_slab(size, flags);
 	if (unlikely(ZERO_OR_NULL_PTR(cachep)))
 		return cachep;
diff --git a/mm/slab_common.c b/mm/slab_common.c
index fea3376f9816..3a7ac4f15194 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -1027,18 +1027,18 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags)
 {
 	unsigned int index;
 
-	if (unlikely(size > KMALLOC_MAX_SIZE)) {
-		WARN_ON_ONCE(!(flags & __GFP_NOWARN));
-		return NULL;
-	}
-
 	if (size <= 192) {
 		if (!size)
 			return ZERO_SIZE_PTR;
 
 		index = size_index[size_index_elem(size)];
-	} else
+	} else {
+		if (unlikely(size > KMALLOC_MAX_CACHE_SIZE)) {
+			WARN_ON(1);
+			return NULL;
+		}
 		index = fls(size - 1);
+	}
 
 #ifdef CONFIG_ZONE_DMA
 	if (unlikely((flags & GFP_DMA)))
-- 
2.17.1