Re: [PATCH] nvme: utilize two queue maps, one for reads and one for writes

From: Guenter Roeck <linux@roeck-us.net>
To: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>,
	Sagi Grimberg <sagi@grimberg.me>,
	linux-nvme@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] nvme: utilize two queue maps, one for reads and one for writes
Date: Thu, 15 Nov 2018 11:38:54 -0800	[thread overview]
Message-ID: <20181115193854.GA30639@roeck-us.net> (raw)
In-Reply-To: <e7f72ebb-68e8-29f4-121b-4053ec8b537e@kernel.dk>

On Thu, Nov 15, 2018 at 12:29:04PM -0700, Jens Axboe wrote:
> On 11/15/18 12:11 PM, Guenter Roeck wrote:
> > On Wed, Nov 14, 2018 at 10:12:44AM -0700, Jens Axboe wrote:
> >>
> >> I think the below patch should fix it.
> >>
> > 
> > I spoke too early. sparc64, next-20181115:
> > 
> > [   14.204370] nvme nvme0: pci function 0000:02:00.0
> > [   14.249956] nvme nvme0: Removing after probe failure status: -5
> > [   14.263496] ------------[ cut here ]------------
> > [   14.263913] WARNING: CPU: 0 PID: 15 at kernel/irq/manage.c:1597 __free_irq+0xa4/0x320
> > [   14.264265] Trying to free already-free IRQ 9
> > [   14.264519] Modules linked in:
> > [   14.264961] CPU: 0 PID: 15 Comm: kworker/u2:1 Not tainted 4.20.0-rc2-next-20181115 #1
> > [   14.265555] Workqueue: nvme-reset-wq nvme_reset_work
> > [   14.265899] Call Trace:
> > [   14.266118]  [000000000046944c] __warn+0xcc/0x100
> > [   14.266375]  [00000000004694b0] warn_slowpath_fmt+0x30/0x40
> > [   14.266635]  [00000000004d4ce4] __free_irq+0xa4/0x320
> > [   14.266867]  [00000000004d4ff8] free_irq+0x38/0x80
> > [   14.267092]  [00000000007b1874] pci_free_irq+0x14/0x40
> > [   14.267327]  [00000000008a5444] nvme_dev_disable+0xe4/0x520
> > [   14.267576]  [00000000008a69b8] nvme_reset_work+0x138/0x1c60
> > [   14.267827]  [0000000000488dd0] process_one_work+0x230/0x6e0
> > [   14.268079]  [00000000004894f4] worker_thread+0x274/0x520
> > [   14.268321]  [0000000000490624] kthread+0xe4/0x120
> > [   14.268544]  [00000000004060c4] ret_from_fork+0x1c/0x2c
> > [   14.268825]  [0000000000000000]           (null)
> > [   14.269089] irq event stamp: 32796
> > [   14.269350] hardirqs last  enabled at (32795): [<0000000000b624a4>] _raw_spin_unlock_irqrestore+0x24/0x80
> > [   14.269757] hardirqs last disabled at (32796): [<0000000000b622f4>] _raw_spin_lock_irqsave+0x14/0x60
> > [   14.270566] softirqs last  enabled at (32780): [<0000000000b64c18>] __do_softirq+0x238/0x520
> > [   14.271206] softirqs last disabled at (32729): [<000000000042ceec>] do_softirq_own_stack+0x2c/0x40
> > [   14.272288] ---[ end trace cb79ccd2a0a03f3c ]---
> > 
> > Looks like an error during probe followed by an error cleanup problem.
> 
> Did it previous probe fine? Or is the new thing just the fact that
> we spew a warning on trying to free a non-existing vector?
> 
This works fine in mainline, if that is your question.

Guenter