[PATCH 7/7] Staging: iio: adt7316: Use device tree data to assign irq_type

[PATCH 7/7] Staging: iio: adt7316: Use device tree data to assign irq_type

[Shreeya Patel]

ADT7316 driver no more uses platform data and hence use device tree
data instead of platform data for assigning irq_type field.
Switch case figures out the type of irq and if it's the default case
then assign the default value to the irq_type i.e.
irq_type = IRQF_TRIGGER_LOW

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
 drivers/staging/iio/addac/adt7316.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index 9c72538baf9e..c647875a64f5 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -2101,8 +2101,7 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 {
 	struct adt7316_chip_info *chip;
 	struct iio_dev *indio_dev;
-	unsigned short *adt7316_platform_data = dev->platform_data;
-	int irq_type = IRQF_TRIGGER_LOW;
+	int irq_type;
 	int ret = 0;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
@@ -2146,8 +2145,22 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	if (chip->bus.irq > 0) {
-		if (adt7316_platform_data[0])
-			irq_type = adt7316_platform_data[0];
+		irq_type =
+			irqd_get_trigger_type(irq_get_irq_data(chip->bus.irq));
+
+		switch (irq_type) {
+		case IRQF_TRIGGER_HIGH:
+		case IRQF_TRIGGER_RISING:
+			break;
+		case IRQF_TRIGGER_LOW:
+		case IRQF_TRIGGER_FALLING:
+			break;
+		default:
+			dev_info(dev, "mode %d unsupported, using IRQF_TRIGGER_LOW\n",
+				 irq_type);
+			irq_type = IRQF_TRIGGER_LOW;
+			break;
+		}
 
 		ret = devm_request_threaded_irq(dev, chip->bus.irq,
 						NULL,
-- 
2.17.1

Re: [PATCH 7/7] Staging: iio: adt7316: Use device tree data to assign irq_type

[Jonathan Cameron]

On Sat, 17 Nov 2018 04:34:55 +0530
Shreeya Patel <shreeya.patel23498@gmail.com> wrote:

> ADT7316 driver no more uses platform data and hence use device tree
> data instead of platform data for assigning irq_type field.
> Switch case figures out the type of irq and if it's the default case
> then assign the default value to the irq_type i.e.
> irq_type = IRQF_TRIGGER_LOW
> 
> Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
I think this set of 3 patches around irq type are fine.  If no
one else finds any issues, I'll pick up in v2.

Thanks,

Jonathan

> ---
>  drivers/staging/iio/addac/adt7316.c | 21 +++++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
> index 9c72538baf9e..c647875a64f5 100644
> --- a/drivers/staging/iio/addac/adt7316.c
> +++ b/drivers/staging/iio/addac/adt7316.c
> @@ -2101,8 +2101,7 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
>  {
>  	struct adt7316_chip_info *chip;
>  	struct iio_dev *indio_dev;
> -	unsigned short *adt7316_platform_data = dev->platform_data;
> -	int irq_type = IRQF_TRIGGER_LOW;
> +	int irq_type;
>  	int ret = 0;
>  
>  	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
> @@ -2146,8 +2145,22 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  
>  	if (chip->bus.irq > 0) {
> -		if (adt7316_platform_data[0])
> -			irq_type = adt7316_platform_data[0];
> +		irq_type =
> +			irqd_get_trigger_type(irq_get_irq_data(chip->bus.irq));
> +
> +		switch (irq_type) {
> +		case IRQF_TRIGGER_HIGH:
> +		case IRQF_TRIGGER_RISING:
> +			break;
> +		case IRQF_TRIGGER_LOW:
> +		case IRQF_TRIGGER_FALLING:
> +			break;
> +		default:
> +			dev_info(dev, "mode %d unsupported, using IRQF_TRIGGER_LOW\n",
> +				 irq_type);
> +			irq_type = IRQF_TRIGGER_LOW;
> +			break;
> +		}
>  
>  		ret = devm_request_threaded_irq(dev, chip->bus.irq,
>  						NULL,