* [PATCH] ARM: dts: imx6sx: specify proper clock for nodes with dummy clock
@ 2018-11-07 8:51 Anson Huang
2018-11-19 12:03 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Anson Huang @ 2018-11-07 8:51 UTC (permalink / raw)
To: shawnguo, s.hauer, kernel, Fabio Estevam, robh+dt, mark.rutland,
linux-arm-kernel, devicetree, linux-kernel
Cc: dl-linux-imx
From i.MX6SX reference manual CCM chapter, KPP and
WDOGn use IPG clock as their clock, specify IPG
clock for KPP and WDOGn instead of DUMMY clock.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 84b7687..07ea7d9 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -558,7 +558,7 @@
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
status = "disabled";
};
@@ -566,14 +566,14 @@
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
};
wdog2: wdog@20c0000 {
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
status = "disabled";
};
@@ -1270,7 +1270,7 @@
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_DUMMY>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: imx6sx: specify proper clock for nodes with dummy clock
2018-11-07 8:51 [PATCH] ARM: dts: imx6sx: specify proper clock for nodes with dummy clock Anson Huang
@ 2018-11-19 12:03 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2018-11-19 12:03 UTC (permalink / raw)
To: Anson Huang
Cc: s.hauer, kernel, Fabio Estevam, robh+dt, mark.rutland,
linux-arm-kernel, devicetree, linux-kernel, dl-linux-imx
On Wed, Nov 07, 2018 at 08:51:07AM +0000, Anson Huang wrote:
> From i.MX6SX reference manual CCM chapter, KPP and
> WDOGn use IPG clock as their clock, specify IPG
> clock for KPP and WDOGn instead of DUMMY clock.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-11-19 12:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-07 8:51 [PATCH] ARM: dts: imx6sx: specify proper clock for nodes with dummy clock Anson Huang
2018-11-19 12:03 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).