[PATCH memory-model 0/3] Updates to the formal memory model

[PATCH memory-model 0/3] Updates to the formal memory model

[Paul E. McKenney]

Hello, Ingo!

This series contains updates to the Linux kernel's formal memory model
in tools/memory-model.  These patches are ready for inclusion into -tip.

1.	Model smp_mb__after_unlock_lock(), courtesy of Andrea Parri.

2.	Add scripts to check github litmus tests.

3.	Make scripts take "-j" abbreviation for "--jobs".

There is another series in preparation to model SRCU, but this series
requires hot-off-the presses changes to the herd tool that have not yet
been released.  This SRCU series is therefore targeting the merge window
after the upcoming one.  People wishing to experiment with the prototype
SRCU model may obtain it from my -rcu tree at branch "dev", and use
a bleeding-edge herd7 built from https://github.com/herd/herdtools7/,
version 7.51+2(dev), which is (commit 10403b24070c) or later.

							Thanx, Paul

------------------------------------------------------------------------

 .gitignore                 |    1 
 README                     |    2 
 linux-kernel.bell          |    3 
 linux-kernel.cat           |    4 -
 linux-kernel.def           |    1 
 scripts/README             |   70 ++++++++++++++++++++++
 scripts/checkalllitmus.sh  |   53 +++++++----------
 scripts/checkghlitmus.sh   |   65 ++++++++++++++++++++
 scripts/checklitmus.sh     |   74 +++--------------------
 scripts/checklitmushist.sh |   60 +++++++++++++++++++
 scripts/cmplitmushist.sh   |   87 +++++++++++++++++++++++++++
 scripts/initlitmushist.sh  |   68 +++++++++++++++++++++
 scripts/judgelitmus.sh     |   78 +++++++++++++++++++++++++
 scripts/newlitmushist.sh   |   61 +++++++++++++++++++
 scripts/parseargs.sh       |  140 ++++++++++++++++++++++++++++++++++++++++++++-
 scripts/runlitmushist.sh   |   87 +++++++++++++++++++++++++++
 16 files changed, 757 insertions(+), 97 deletions(-)

[PATCH memory-model 1/3] tools/memory-model: Model smp_mb__after_unlock_lock()

[Paul E. McKenney]

From: Andrea Parri <andrea.parri@amarulasolutions.com>

>From the header comment for smp_mb__after_unlock_lock():

  "Place this after a lock-acquisition primitive to guarantee that
   an UNLOCK+LOCK pair acts as a full barrier.  This guarantee applies
   if the UNLOCK and LOCK are executed by the same CPU or if the
   UNLOCK and LOCK operate on the same lock variable."

This formalizes the above guarantee by defining (new) mb-links according
to the law:

  ([M] ; po ; [UL] ; (co | po) ; [LKW] ;
	fencerel(After-unlock-lock) ; [M])

where the component ([UL] ; co ; [LKW]) identifies "UNLOCK+LOCK pairs on
the same lock variable" and the component ([UL] ; po ; [LKW]) identifies
"UNLOCK+LOCK pairs executed by the same CPU".

In particular, the LKMM forbids the following two behaviors (the second
litmus test below is based on

  Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html

c.f., Section "Tree RCU Grace Period Memory Ordering Building Blocks"):

C after-unlock-lock-same-cpu

(*
 * Result: Never
 *)

{}

P0(spinlock_t *s, spinlock_t *t, int *x, int *y)
{
	int r0;

	spin_lock(s);
	WRITE_ONCE(*x, 1);
	spin_unlock(s);
	spin_lock(t);
	smp_mb__after_unlock_lock();
	r0 = READ_ONCE(*y);
	spin_unlock(t);
}

P1(int *x, int *y)
{
	int r0;

	WRITE_ONCE(*y, 1);
	smp_mb();
	r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 1:r0=0)

C after-unlock-lock-same-lock-variable

(*
 * Result: Never
 *)

{}

P0(spinlock_t *s, int *x, int *y)
{
	int r0;

	spin_lock(s);
	WRITE_ONCE(*x, 1);
	r0 = READ_ONCE(*y);
	spin_unlock(s);
}

P1(spinlock_t *s, int *y, int *z)
{
	int r0;

	spin_lock(s);
	smp_mb__after_unlock_lock();
	WRITE_ONCE(*y, 1);
	r0 = READ_ONCE(*z);
	spin_unlock(s);
}

P2(int *z, int *x)
{
	int r0;

	WRITE_ONCE(*z, 1);
	smp_mb();
	r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 1:r0=0 /\ 2:r0=0)

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
---
 tools/memory-model/linux-kernel.bell | 3 ++-
 tools/memory-model/linux-kernel.cat  | 4 +++-
 tools/memory-model/linux-kernel.def  | 1 +
 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell
index b84fb2f67109..796513362c05 100644
--- a/tools/memory-model/linux-kernel.bell
+++ b/tools/memory-model/linux-kernel.bell
@@ -29,7 +29,8 @@ enum Barriers = 'wmb (*smp_wmb*) ||
 		'sync-rcu (*synchronize_rcu*) ||
 		'before-atomic (*smp_mb__before_atomic*) ||
 		'after-atomic (*smp_mb__after_atomic*) ||
-		'after-spinlock (*smp_mb__after_spinlock*)
+		'after-spinlock (*smp_mb__after_spinlock*) ||
+		'after-unlock-lock (*smp_mb__after_unlock_lock*)
 instructions F[Barriers]
 
 (* Compute matching pairs of nested Rcu-lock and Rcu-unlock *)
diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat
index 882fc33274ac..8f23c74a96fd 100644
--- a/tools/memory-model/linux-kernel.cat
+++ b/tools/memory-model/linux-kernel.cat
@@ -30,7 +30,9 @@ let wmb = [W] ; fencerel(Wmb) ; [W]
 let mb = ([M] ; fencerel(Mb) ; [M]) |
 	([M] ; fencerel(Before-atomic) ; [RMW] ; po? ; [M]) |
 	([M] ; po? ; [RMW] ; fencerel(After-atomic) ; [M]) |
-	([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M])
+	([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M]) |
+	([M] ; po ; [UL] ; (co | po) ; [LKW] ;
+		fencerel(After-unlock-lock) ; [M])
 let gp = po ; [Sync-rcu] ; po?
 
 let strong-fence = mb | gp
diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def
index 6fa3eb28d40b..b27911cc087d 100644
--- a/tools/memory-model/linux-kernel.def
+++ b/tools/memory-model/linux-kernel.def
@@ -23,6 +23,7 @@ smp_wmb() { __fence{wmb}; }
 smp_mb__before_atomic() { __fence{before-atomic}; }
 smp_mb__after_atomic() { __fence{after-atomic}; }
 smp_mb__after_spinlock() { __fence{after-spinlock}; }
+smp_mb__after_unlock_lock() { __fence{after-unlock-lock}; }
 
 // Exchange
 xchg(X,V)  __xchg{mb}(X,V)
-- 
2.17.1

[tip:locking/core] tools/memory-model: Model smp_mb__after_unlock_lock()

[tip-bot for Andrea Parri]

Commit-ID:  4607abbcf464ea2be14da444215d05c73025cf6e
Gitweb:     https://git.kernel.org/tip/4607abbcf464ea2be14da444215d05c73025cf6e
Author:     Andrea Parri <andrea.parri@amarulasolutions.com>
AuthorDate: Mon, 3 Dec 2018 15:04:49 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 4 Dec 2018 07:29:51 +0100

tools/memory-model: Model smp_mb__after_unlock_lock()

The kernel documents smp_mb__after_unlock_lock() the following way:

  "Place this after a lock-acquisition primitive to guarantee that
   an UNLOCK+LOCK pair acts as a full barrier.  This guarantee applies
   if the UNLOCK and LOCK are executed by the same CPU or if the
   UNLOCK and LOCK operate on the same lock variable."

Formalize in LKMM the above guarantee by defining (new) mb-links according
to the law:

  ([M] ; po ; [UL] ; (co | po) ; [LKW] ;
	fencerel(After-unlock-lock) ; [M])

where the component ([UL] ; co ; [LKW]) identifies "UNLOCK+LOCK pairs on
the same lock variable" and the component ([UL] ; po ; [LKW]) identifies
"UNLOCK+LOCK pairs executed by the same CPU".

In particular, the LKMM forbids the following two behaviors (the second
litmus test below is based on:

  Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html

c.f., Section "Tree RCU Grace Period Memory Ordering Building Blocks"):

C after-unlock-lock-same-cpu

(*
 * Result: Never
 *)

{}

P0(spinlock_t *s, spinlock_t *t, int *x, int *y)
{
	int r0;

	spin_lock(s);
	WRITE_ONCE(*x, 1);
	spin_unlock(s);
	spin_lock(t);
	smp_mb__after_unlock_lock();
	r0 = READ_ONCE(*y);
	spin_unlock(t);
}

P1(int *x, int *y)
{
	int r0;

	WRITE_ONCE(*y, 1);
	smp_mb();
	r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 1:r0=0)

C after-unlock-lock-same-lock-variable

(*
 * Result: Never
 *)

{}

P0(spinlock_t *s, int *x, int *y)
{
	int r0;

	spin_lock(s);
	WRITE_ONCE(*x, 1);
	r0 = READ_ONCE(*y);
	spin_unlock(s);
}

P1(spinlock_t *s, int *y, int *z)
{
	int r0;

	spin_lock(s);
	smp_mb__after_unlock_lock();
	WRITE_ONCE(*y, 1);
	r0 = READ_ONCE(*z);
	spin_unlock(s);
}

P2(int *z, int *x)
{
	int r0;

	WRITE_ONCE(*z, 1);
	smp_mb();
	r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 1:r0=0 /\ 2:r0=0)

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20181203230451.28921-1-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 tools/memory-model/linux-kernel.bell | 3 ++-
 tools/memory-model/linux-kernel.cat  | 4 +++-
 tools/memory-model/linux-kernel.def  | 1 +
 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell
index b84fb2f67109..796513362c05 100644
--- a/tools/memory-model/linux-kernel.bell
+++ b/tools/memory-model/linux-kernel.bell
@@ -29,7 +29,8 @@ enum Barriers = 'wmb (*smp_wmb*) ||
 		'sync-rcu (*synchronize_rcu*) ||
 		'before-atomic (*smp_mb__before_atomic*) ||
 		'after-atomic (*smp_mb__after_atomic*) ||
-		'after-spinlock (*smp_mb__after_spinlock*)
+		'after-spinlock (*smp_mb__after_spinlock*) ||
+		'after-unlock-lock (*smp_mb__after_unlock_lock*)
 instructions F[Barriers]
 
 (* Compute matching pairs of nested Rcu-lock and Rcu-unlock *)
diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat
index 882fc33274ac..8f23c74a96fd 100644
--- a/tools/memory-model/linux-kernel.cat
+++ b/tools/memory-model/linux-kernel.cat
@@ -30,7 +30,9 @@ let wmb = [W] ; fencerel(Wmb) ; [W]
 let mb = ([M] ; fencerel(Mb) ; [M]) |
 	([M] ; fencerel(Before-atomic) ; [RMW] ; po? ; [M]) |
 	([M] ; po? ; [RMW] ; fencerel(After-atomic) ; [M]) |
-	([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M])
+	([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M]) |
+	([M] ; po ; [UL] ; (co | po) ; [LKW] ;
+		fencerel(After-unlock-lock) ; [M])
 let gp = po ; [Sync-rcu] ; po?
 
 let strong-fence = mb | gp
diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def
index 6fa3eb28d40b..b27911cc087d 100644
--- a/tools/memory-model/linux-kernel.def
+++ b/tools/memory-model/linux-kernel.def
@@ -23,6 +23,7 @@ smp_wmb() { __fence{wmb}; }
 smp_mb__before_atomic() { __fence{before-atomic}; }
 smp_mb__after_atomic() { __fence{after-atomic}; }
 smp_mb__after_spinlock() { __fence{after-spinlock}; }
+smp_mb__after_unlock_lock() { __fence{after-unlock-lock}; }
 
 // Exchange
 xchg(X,V)  __xchg{mb}(X,V)

[tip:locking/core] tools/memory-model: Model smp_mb__after_unlock_lock()

[tip-bot for Andrea Parri]

Commit-ID:  5b735eb1ce481b2f1674a47c0995944b1cb6f5d5
Gitweb:     https://git.kernel.org/tip/5b735eb1ce481b2f1674a47c0995944b1cb6f5d5
Author:     Andrea Parri <andrea.parri@amarulasolutions.com>
AuthorDate: Mon, 3 Dec 2018 15:04:49 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 21 Jan 2019 11:06:55 +0100

tools/memory-model: Model smp_mb__after_unlock_lock()

The kernel documents smp_mb__after_unlock_lock() the following way:

  "Place this after a lock-acquisition primitive to guarantee that
   an UNLOCK+LOCK pair acts as a full barrier.  This guarantee applies
   if the UNLOCK and LOCK are executed by the same CPU or if the
   UNLOCK and LOCK operate on the same lock variable."

Formalize in LKMM the above guarantee by defining (new) mb-links according
to the law:

  ([M] ; po ; [UL] ; (co | po) ; [LKW] ;
	fencerel(After-unlock-lock) ; [M])

where the component ([UL] ; co ; [LKW]) identifies "UNLOCK+LOCK pairs on
the same lock variable" and the component ([UL] ; po ; [LKW]) identifies
"UNLOCK+LOCK pairs executed by the same CPU".

In particular, the LKMM forbids the following two behaviors (the second
litmus test below is based on:

  Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html

c.f., Section "Tree RCU Grace Period Memory Ordering Building Blocks"):

C after-unlock-lock-same-cpu

(*
 * Result: Never
 *)

{}

P0(spinlock_t *s, spinlock_t *t, int *x, int *y)
{
	int r0;

	spin_lock(s);
	WRITE_ONCE(*x, 1);
	spin_unlock(s);
	spin_lock(t);
	smp_mb__after_unlock_lock();
	r0 = READ_ONCE(*y);
	spin_unlock(t);
}

P1(int *x, int *y)
{
	int r0;

	WRITE_ONCE(*y, 1);
	smp_mb();
	r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 1:r0=0)

C after-unlock-lock-same-lock-variable

(*
 * Result: Never
 *)

{}

P0(spinlock_t *s, int *x, int *y)
{
	int r0;

	spin_lock(s);
	WRITE_ONCE(*x, 1);
	r0 = READ_ONCE(*y);
	spin_unlock(s);
}

P1(spinlock_t *s, int *y, int *z)
{
	int r0;

	spin_lock(s);
	smp_mb__after_unlock_lock();
	WRITE_ONCE(*y, 1);
	r0 = READ_ONCE(*z);
	spin_unlock(s);
}

P2(int *z, int *x)
{
	int r0;

	WRITE_ONCE(*z, 1);
	smp_mb();
	r0 = READ_ONCE(*x);
}

exists (0:r0=0 /\ 1:r0=0 /\ 2:r0=0)

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20181203230451.28921-1-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 tools/memory-model/linux-kernel.bell | 3 ++-
 tools/memory-model/linux-kernel.cat  | 4 +++-
 tools/memory-model/linux-kernel.def  | 1 +
 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell
index b84fb2f67109..796513362c05 100644
--- a/tools/memory-model/linux-kernel.bell
+++ b/tools/memory-model/linux-kernel.bell
@@ -29,7 +29,8 @@ enum Barriers = 'wmb (*smp_wmb*) ||
 		'sync-rcu (*synchronize_rcu*) ||
 		'before-atomic (*smp_mb__before_atomic*) ||
 		'after-atomic (*smp_mb__after_atomic*) ||
-		'after-spinlock (*smp_mb__after_spinlock*)
+		'after-spinlock (*smp_mb__after_spinlock*) ||
+		'after-unlock-lock (*smp_mb__after_unlock_lock*)
 instructions F[Barriers]
 
 (* Compute matching pairs of nested Rcu-lock and Rcu-unlock *)
diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat
index 882fc33274ac..8f23c74a96fd 100644
--- a/tools/memory-model/linux-kernel.cat
+++ b/tools/memory-model/linux-kernel.cat
@@ -30,7 +30,9 @@ let wmb = [W] ; fencerel(Wmb) ; [W]
 let mb = ([M] ; fencerel(Mb) ; [M]) |
 	([M] ; fencerel(Before-atomic) ; [RMW] ; po? ; [M]) |
 	([M] ; po? ; [RMW] ; fencerel(After-atomic) ; [M]) |
-	([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M])
+	([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M]) |
+	([M] ; po ; [UL] ; (co | po) ; [LKW] ;
+		fencerel(After-unlock-lock) ; [M])
 let gp = po ; [Sync-rcu] ; po?
 
 let strong-fence = mb | gp
diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def
index 6fa3eb28d40b..b27911cc087d 100644
--- a/tools/memory-model/linux-kernel.def
+++ b/tools/memory-model/linux-kernel.def
@@ -23,6 +23,7 @@ smp_wmb() { __fence{wmb}; }
 smp_mb__before_atomic() { __fence{before-atomic}; }
 smp_mb__after_atomic() { __fence{after-atomic}; }
 smp_mb__after_spinlock() { __fence{after-spinlock}; }
+smp_mb__after_unlock_lock() { __fence{after-unlock-lock}; }
 
 // Exchange
 xchg(X,V)  __xchg{mb}(X,V)

[PATCH memory-model 2/3] EXP tools/memory-model: Add scripts to check github litmus tests

[Paul E. McKenney]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

The https://github.com/paulmckrcu/litmus repository contains a large
number of C-language litmus tests that include "Result:" comments
predicting the verification result.  This commit adds a number of scripts
that run tests on these litmus tests:

checkghlitmus.sh:
	Runs all litmus tests in the https://github.com/paulmckrcu/litmus
        archive that are C-language and that have "Result:" comment lines
	documenting expected results, comparing the actual results to
	those expected.  Clones the repository if it has not already
	been cloned into the "tools/memory-model/litmus" directory.

initlitmushist.sh
	Run all litmus tests having no more than the specified number
	of processes given a specified timeout, recording the results in
	.litmus.out files.  Clones the repository if it has not already
	been cloned into the "tools/memory-model/litmus" directory.

newlitmushist.sh
	For all new or updated litmus tests having no more than the
	specified number of processes given a specified timeout, run
	and record the results in .litmus.out files.

checklitmushist.sh
	Run all litmus tests having .litmus.out files from previous
	initlitmushist.sh or newlitmushist.sh runs, comparing the
	herd output to that of the original runs.

The above scripts will run litmus tests concurrently, by default with
one job per available CPU.  Giving any of these scripts the --help
argument will cause them to print usage information.

This commit also adds a number of helper scripts that are not intended
to be invoked from the command line:

cmplitmushist.sh: Compare the output of two different runs of the same
	litmus test.

judgelitmus.sh: Compare the output of a litmus test to its "Result:"
	comment line.

parseargs.sh: Parse command-line arguments.

runlitmushist.sh: Run the litmus tests whose pathnames are provided one
	per line on standard input.

While in the area, this commit also makes the existing checklitmus.sh
and checkalllitmus.sh scripts use parseargs.sh in order to provide a
bit of uniformity.  In addition, per-litmus-test status output is directed
to stdout, while end-of-test summary information is directed to stderr.
Finally, the error flag standardizes on "!!!" to assist those familiar
with rcutorture output.

The defaults for the parseargs.sh arguments may be overridden by using
environment variables: LKMM_DESTDIR for --destdir, LKMM_HERD_OPTIONS
for --herdoptions, LKMM_JOBS for --jobs, LKMM_PROCS for --procs, and
LKMM_TIMEOUT for --timeout.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: History-check summary-line changes per Alan Stern feedback. ]
---
 tools/memory-model/.gitignore                 |   1 +
 tools/memory-model/README                     |   2 +
 tools/memory-model/scripts/README             |  70 ++++++++++
 tools/memory-model/scripts/checkalllitmus.sh  |  53 ++++----
 tools/memory-model/scripts/checkghlitmus.sh   |  65 +++++++++
 tools/memory-model/scripts/checklitmus.sh     |  74 ++--------
 tools/memory-model/scripts/checklitmushist.sh |  60 +++++++++
 tools/memory-model/scripts/cmplitmushist.sh   |  87 ++++++++++++
 tools/memory-model/scripts/initlitmushist.sh  |  68 ++++++++++
 tools/memory-model/scripts/judgelitmus.sh     |  78 +++++++++++
 tools/memory-model/scripts/newlitmushist.sh   |  61 +++++++++
 tools/memory-model/scripts/parseargs.sh       | 126 ++++++++++++++++++
 tools/memory-model/scripts/runlitmushist.sh   |  87 ++++++++++++
 13 files changed, 739 insertions(+), 93 deletions(-)
 create mode 100644 tools/memory-model/.gitignore
 create mode 100644 tools/memory-model/scripts/README
 create mode 100755 tools/memory-model/scripts/checkghlitmus.sh
 create mode 100755 tools/memory-model/scripts/checklitmushist.sh
 create mode 100644 tools/memory-model/scripts/cmplitmushist.sh
 create mode 100755 tools/memory-model/scripts/initlitmushist.sh
 create mode 100755 tools/memory-model/scripts/judgelitmus.sh
 create mode 100755 tools/memory-model/scripts/newlitmushist.sh
 create mode 100755 tools/memory-model/scripts/parseargs.sh
 create mode 100755 tools/memory-model/scripts/runlitmushist.sh

diff --git a/tools/memory-model/.gitignore b/tools/memory-model/.gitignore
new file mode 100644
index 000000000000..b1d34c52f3c3
--- /dev/null
+++ b/tools/memory-model/.gitignore
@@ -0,0 +1 @@
+litmus
diff --git a/tools/memory-model/README b/tools/memory-model/README
index acf9077cffaa..0f2c366518c6 100644
--- a/tools/memory-model/README
+++ b/tools/memory-model/README
@@ -156,6 +156,8 @@ lock.cat
 README
 	This file.
 
+scripts	Various scripts, see scripts/README.
+
 
 ===========
 LIMITATIONS
diff --git a/tools/memory-model/scripts/README b/tools/memory-model/scripts/README
new file mode 100644
index 000000000000..29375a1fbbfa
--- /dev/null
+++ b/tools/memory-model/scripts/README
@@ -0,0 +1,70 @@
+			============
+			LKMM SCRIPTS
+			============
+
+
+These scripts are run from the tools/memory-model directory.
+
+checkalllitmus.sh
+
+	Run all litmus tests in the litmus-tests directory, checking
+	the results against the expected results recorded in the
+	"Result:" comment lines.
+
+checkghlitmus.sh
+
+	Run all litmus tests in the https://github.com/paulmckrcu/litmus
+	archive that are C-language and that have "Result:" comment lines
+	documenting expected results, comparing the actual results to
+	those expected.
+
+checklitmushist.sh
+
+	Run all litmus tests having .litmus.out files from previous
+	initlitmushist.sh or newlitmushist.sh runs, comparing the
+	herd output to that of the original runs.
+
+checklitmus.sh
+
+	Check a single litmus test against its "Result:" expected result.
+
+cmplitmushist.sh
+
+	Compare output from two different runs of the same litmus tests,
+	with the absolute pathnames of the tests to run provided one
+	name per line on standard input.  Not normally run manually,
+	provided instead for use by other scripts.
+
+initlitmushist.sh
+
+	Run all litmus tests having no more than the specified number
+	of processes given a specified timeout, recording the results
+	in .litmus.out files.
+
+judgelitmus.sh
+
+	Given a .litmus file and its .litmus.out herd output, check the
+	.litmus.out file against the .litmus file's "Result:" comment to
+	judge whether the test ran correctly.  Not normally run manually,
+	provided instead for use by other scripts.
+
+newlitmushist.sh
+
+	For all new or updated litmus tests having no more than the
+	specified number of processes given a specified timeout, run
+	and record the results in .litmus.out files.
+
+parseargs.sh
+
+	Parse command-line arguments.  Not normally run manually,
+	provided instead for use by other scripts.
+
+runlitmushist.sh
+
+	Run the litmus tests whose absolute pathnames are provided one
+	name per line on standard input.  Not normally run manually,
+	provided instead for use by other scripts.
+
+README
+
+	This file
diff --git a/tools/memory-model/scripts/checkalllitmus.sh b/tools/memory-model/scripts/checkalllitmus.sh
index ca528f9a24d4..b35fcd61ecf6 100755
--- a/tools/memory-model/scripts/checkalllitmus.sh
+++ b/tools/memory-model/scripts/checkalllitmus.sh
@@ -1,42 +1,27 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
 #
-# Run herd tests on all .litmus files in the specified directory (which
-# defaults to litmus-tests) and check each file's result against a "Result:"
-# comment within that litmus test.  If the verification result does not
-# match that specified in the litmus test, this script prints an error
-# message prefixed with "^^^".  It also outputs verification results to
-# a file whose name is that of the specified litmus test, but with ".out"
-# appended.
+# Run herd tests on all .litmus files in the litmus-tests directory
+# and check each file's result against a "Result:" comment within that
+# litmus test.  If the verification result does not match that specified
+# in the litmus test, this script prints an error message prefixed with
+# "^^^".  It also outputs verification results to a file whose name is
+# that of the specified litmus test, but with ".out" appended.
 #
 # Usage:
-#	checkalllitmus.sh [ directory ]
+#	checkalllitmus.sh
 #
-# The LINUX_HERD_OPTIONS environment variable may be used to specify
-# arguments to herd, whose default is defined by the checklitmus.sh script.
-# Thus, one would normally run this in the directory containing the memory
-# model, specifying the pathname of the litmus test to check.
+# Run this in the directory containing the memory model.
 #
 # This script makes no attempt to run the litmus tests concurrently.
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
 # Copyright IBM Corporation, 2018
 #
 # Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
-litmusdir=${1-litmus-tests}
+. scripts/parseargs.sh
+
+litmusdir=litmus-tests
 if test -d "$litmusdir" -a -r "$litmusdir" -a -x "$litmusdir"
 then
 	:
@@ -45,6 +30,14 @@ else
 	exit 255
 fi
 
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find $litmusdir -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
 # Find the checklitmus script.  If it is not where we expect it, then
 # assume that the caller has the PATH environment variable set
 # appropriately.
@@ -57,7 +50,7 @@ fi
 
 # Run the script on all the litmus tests in the specified directory
 ret=0
-for i in litmus-tests/*.litmus
+for i in $litmusdir/*.litmus
 do
 	if ! $clscript $i
 	then
@@ -66,8 +59,8 @@ do
 done
 if test "$ret" -ne 0
 then
-	echo " ^^^ VERIFICATION MISMATCHES"
+	echo " ^^^ VERIFICATION MISMATCHES" 1>&2
 else
-	echo All litmus tests verified as was expected.
+	echo All litmus tests verified as was expected. 1>&2
 fi
 exit $ret
diff --git a/tools/memory-model/scripts/checkghlitmus.sh b/tools/memory-model/scripts/checkghlitmus.sh
new file mode 100755
index 000000000000..6589fbb6f653
--- /dev/null
+++ b/tools/memory-model/scripts/checkghlitmus.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests having a maximum number of processes
+# to run, defaults to 6.
+#
+# sh checkghlitmus.sh
+#
+# Run from the Linux kernel tools/memory-model directory.  See the
+# parseargs.sh scripts for arguments.
+
+. scripts/parseargs.sh
+
+T=/tmp/checkghlitmus.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# Clone the repository if it is not already present.
+if test -d litmus
+then
+	:
+else
+	git clone https://github.com/paulmckrcu/litmus
+	( cd litmus; git checkout origin/master )
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+
+# Create a list of C-language litmus tests with "Result:" commands and
+# no more than the specified number of processes.
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+xargs < $T/list-C -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' > $T/list-C-result
+xargs < $T/list-C-result -r grep -L "^P${LKMM_PROCS}" > $T/list-C-result-short
+
+# Form list of tests without corresponding .litmus.out files
+sort $T/list-C-already $T/list-C-result-short | uniq -u > $T/list-C-needed
+
+# Run any needed tests.
+if scripts/runlitmushist.sh < $T/list-C-needed > $T/run.stdout 2> $T/run.stderr
+then
+	errs=
+else
+	errs=1
+fi
+
+sed < $T/list-C-result-short -e 's,^,scripts/judgelitmus.sh ,' |
+	sh > $T/judge.stdout 2> $T/judge.stderr
+
+if test -n "$errs"
+then
+	cat $T/run.stderr 1>&2
+fi
+grep '!!!' $T/judge.stdout
diff --git a/tools/memory-model/scripts/checklitmus.sh b/tools/memory-model/scripts/checklitmus.sh
index bf12a75c0719..dd08801a30b0 100755
--- a/tools/memory-model/scripts/checklitmus.sh
+++ b/tools/memory-model/scripts/checklitmus.sh
@@ -1,40 +1,24 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
 #
-# Run a herd test and check the result against a "Result:" comment within
-# the litmus test.  If the verification result does not match that specified
-# in the litmus test, this script prints an error message prefixed with
-# "^^^" and exits with a non-zero status.  It also outputs verification
+# Run a herd test and invokes judgelitmus.sh to check the result against
+# a "Result:" comment within the litmus test.  It also outputs verification
 # results to a file whose name is that of the specified litmus test, but
 # with ".out" appended.
 #
 # Usage:
 #	checklitmus.sh file.litmus
 #
-# The LINUX_HERD_OPTIONS environment variable may be used to specify
-# arguments to herd, which default to "-conf linux-kernel.cfg".  Thus,
-# one would normally run this in the directory containing the memory model,
-# specifying the pathname of the litmus test to check.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.  The caller is expected to have
+# properly set up the LKMM environment variables.
 #
 # Copyright IBM Corporation, 2018
 #
 # Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
 litmus=$1
-herdoptions=${LINUX_HERD_OPTIONS--conf linux-kernel.cfg}
+herdoptions=${LKMM_HERD_OPTIONS--conf linux-kernel.cfg}
 
 if test -f "$litmus" -a -r "$litmus"
 then
@@ -43,44 +27,8 @@ else
 	echo ' --- ' error: \"$litmus\" is not a readable file
 	exit 255
 fi
-if grep -q '^ \* Result: ' $litmus
-then
-	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
-else
-	outcome=specified
-fi
 
-echo Herd options: $herdoptions > $litmus.out
-/usr/bin/time herd7 -o ~/tmp $herdoptions $litmus >> $litmus.out 2>&1
-grep "Herd options:" $litmus.out
-grep '^Observation' $litmus.out
-if grep -q '^Observation' $litmus.out
-then
-	:
-else
-	cat $litmus.out
-	echo ' ^^^ Verification error'
-	echo ' ^^^ Verification error' >> $litmus.out 2>&1
-	exit 255
-fi
-if test "$outcome" = DEADLOCK
-then
-	echo grep 3 and 4
-	if grep '^Observation' $litmus.out | grep -q 'Never 0 0$'
-	then
-		ret=0
-	else
-		echo " ^^^ Unexpected non-$outcome verification"
-		echo " ^^^ Unexpected non-$outcome verification" >> $litmus.out 2>&1
-		ret=1
-	fi
-elif grep '^Observation' $litmus.out | grep -q $outcome || test "$outcome" = Maybe
-then
-	ret=0
-else
-	echo " ^^^ Unexpected non-$outcome verification"
-	echo " ^^^ Unexpected non-$outcome verification" >> $litmus.out 2>&1
-	ret=1
-fi
-tail -2 $litmus.out | head -1
-exit $ret
+echo Herd options: $herdoptions > $LKMM_DESTDIR/$litmus.out
+/usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $litmus >> $LKMM_DESTDIR/$litmus.out 2>&1
+
+scripts/judgelitmus.sh $litmus
diff --git a/tools/memory-model/scripts/checklitmushist.sh b/tools/memory-model/scripts/checklitmushist.sh
new file mode 100755
index 000000000000..1d210ffb7c8a
--- /dev/null
+++ b/tools/memory-model/scripts/checklitmushist.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Reruns the C-language litmus tests previously run that match the
+# specified criteria, and compares the result to that of the previous
+# runs from initlitmushist.sh and/or newlitmushist.sh.
+#
+# sh checklitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+. scripts/parseargs.sh
+
+T=/tmp/checklitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Run scripts/initlitmushist.sh first, need litmus repo.
+	exit 1
+fi
+
+# Create the results directory and populate it with subdirectories.
+# The initial output is created here to avoid clobbering the output
+# generated earlier.
+mkdir $T/results
+find litmus -type d -print | ( cd $T/results; sed -e 's/^/mkdir -p /' | sh )
+
+# Create the list of litmus tests already run, then remove those that
+# are excluded by this run's --procs argument.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+xargs < $T/list-C-already -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+# Redirect output, run tests, then restore destination directory.
+destdir="$LKMM_DESTDIR"
+LKMM_DESTDIR=$T/results; export LKMM_DESTDIR
+scripts/runlitmushist.sh < $T/list-C-short > $T/runlitmushist.sh.out 2>&1
+LKMM_DESTDIR="$destdir"; export LKMM_DESTDIR
+
+# Move the newly generated .litmus.out files to .litmus.out.new files
+# in the destination directory.
+cdir=`pwd`
+ddir=`awk -v c="$cdir" -v d="$LKMM_DESTDIR" \
+	'END { if (d ~ /^\//) print d; else print c "/" d; }' < /dev/null`
+( cd $T/results; find litmus -type f -name '*.litmus.out' -print |
+  sed -e 's,^.*$,cp & '"$ddir"'/&.new,' | sh )
+
+sed < $T/list-C-short -e 's,^,'"$LKMM_DESTDIR/"',' |
+	sh scripts/cmplitmushist.sh
+exit $?
diff --git a/tools/memory-model/scripts/cmplitmushist.sh b/tools/memory-model/scripts/cmplitmushist.sh
new file mode 100644
index 000000000000..0f498aeeccf5
--- /dev/null
+++ b/tools/memory-model/scripts/cmplitmushist.sh
@@ -0,0 +1,87 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Compares .out and .out.new files for each name on standard input,
+# one full pathname per line.  Outputs comparison results followed by
+# a summary.
+#
+# sh cmplitmushist.sh
+
+T=/tmp/cmplitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# comparetest oldpath newpath
+perfect=0
+obsline=0
+noobsline=0
+obsresult=0
+badcompare=0
+comparetest () {
+	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $1 > $T/oldout
+	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $2 > $T/newout
+	if cmp -s $T/oldout $T/newout && grep -q '^Observation' $1
+	then
+		echo Exact output match: $2
+		perfect=`expr "$perfect" + 1`
+		return 0
+	fi
+
+	grep '^Observation' $1 > $T/oldout
+	grep '^Observation' $2 > $T/newout
+	if test -s $T/oldout -o -s $T/newout
+	then
+		if cmp -s $T/oldout $T/newout
+		then
+			echo Matching Observation result and counts: $2
+			obsline=`expr "$obsline" + 1`
+			return 0
+		fi
+	else
+		echo Missing Observation line "(e.g., herd7 timeout)": $2
+		noobsline=`expr "$noobsline" + 1`
+		return 0
+	fi
+
+	grep '^Observation' $1 | awk '{ print $3 }' > $T/oldout
+	grep '^Observation' $2 | awk '{ print $3 }' > $T/newout
+	if cmp -s $T/oldout $T/newout
+	then
+		echo Matching Observation Always/Sometimes/Never result: $2
+		obsresult=`expr "$obsresult" + 1`
+		return 0
+	fi
+	echo ' !!!' Result changed: $2
+	badcompare=`expr "$badcompare" + 1`
+	return 1
+}
+
+sed -e 's/^.*$/comparetest &.out &.out.new/' > $T/cmpscript
+. $T/cmpscript > $T/cmpscript.out
+cat $T/cmpscript.out
+
+echo ' ---' Summary: 1>&2
+grep '!!!' $T/cmpscript.out 1>&2
+if test "$perfect" -ne 0
+then
+	echo Exact output matches: $perfect 1>&2
+fi
+if test "$obsline" -ne 0
+then
+	echo Matching Observation result and counts: $obsline 1>&2
+fi
+if test "$noobsline" -ne 0
+then
+	echo Missing Observation line "(e.g., herd7 timeout)": $noobsline 1>&2
+fi
+if test "$obsresult" -ne 0
+then
+	echo Matching Observation Always/Sometimes/Never result: $obsresult 1>&2
+fi
+if test "$badcompare" -ne 0
+then
+	echo "!!!" Result changed: $badcompare 1>&2
+	exit 1
+fi
+
+exit 0
diff --git a/tools/memory-model/scripts/initlitmushist.sh b/tools/memory-model/scripts/initlitmushist.sh
new file mode 100755
index 000000000000..956b6957484d
--- /dev/null
+++ b/tools/memory-model/scripts/initlitmushist.sh
@@ -0,0 +1,68 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests matching the specified criteria.
+# Generates the output for each .litmus file into a corresponding
+# .litmus.out file, and does not judge the result.
+#
+# sh initlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# This script can consume significant wallclock time and CPU, especially as
+# the value of --procs rises.  On a four-core (eight hardware threads)
+# 2.5GHz x86 with a one-minute per-run timeout:
+#
+# --procs wallclock CPU		timeouts	tests
+#	1 0m11.241s 0m1.086s           0	   19
+#	2 1m12.598s 2m8.459s           2	  393
+#	3 1m30.007s 6m2.479s           4	 2291
+#	4 3m26.042s 18m5.139s	       9	 3217
+#	5 4m26.661s 23m54.128s	      13	 3784
+#	6 4m41.900s 26m4.721s         13	 4352
+#	7 5m51.463s 35m50.868s        13	 4626
+#	8 10m5.235s 68m43.672s        34	 5117
+#	9 15m57.80s 105m58.101s       69	 5156
+#      10 16m14.13s 103m35.009s       69         5165
+#      20 27m48.55s 198m3.286s       156         5269
+#
+# Increasing the timeout on the 20-process run to five minutes increases
+# the runtime to about 90 minutes with the CPU time rising to about
+# 10 hours.  On the other hand, it decreases the number of timeouts to 101.
+#
+# Note that there are historical tests for which herd7 will fail
+# completely, for example, litmus/manual/atomic/C-unlock-wait-00.litmus
+# contains a call to spin_unlock_wait(), which no longer exists in either
+# the kernel or LKMM.
+
+. scripts/parseargs.sh
+
+T=/tmp/initlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	git clone https://github.com/paulmckrcu/litmus
+	( cd litmus; git checkout origin/master )
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests with no more than the
+# specified number of processes (per the --procs argument).
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+xargs < $T/list-C -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+scripts/runlitmushist.sh < $T/list-C-short
+
+exit 0
diff --git a/tools/memory-model/scripts/judgelitmus.sh b/tools/memory-model/scripts/judgelitmus.sh
new file mode 100755
index 000000000000..0cc63875e395
--- /dev/null
+++ b/tools/memory-model/scripts/judgelitmus.sh
@@ -0,0 +1,78 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Given a .litmus test and the corresponding .litmus.out file, check
+# the .litmus.out file against the "Result:" comment to judge whether
+# the test ran correctly.
+#
+# Usage:
+#	judgelitmus.sh file.litmus
+#
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+litmus=$1
+
+if test -f "$litmus" -a -r "$litmus"
+then
+	:
+else
+	echo ' --- ' error: \"$litmus\" is not a readable file
+	exit 255
+fi
+if test -f "$LKMM_DESTDIR/$litmus".out -a -r "$LKMM_DESTDIR/$litmus".out
+then
+	:
+else
+	echo ' --- ' error: \"$LKMM_DESTDIR/$litmus\".out is not a readable file
+	exit 255
+fi
+if grep -q '^ \* Result: ' $litmus
+then
+	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
+else
+	outcome=specified
+fi
+
+grep '^Observation' $LKMM_DESTDIR/$litmus.out
+if grep -q '^Observation' $LKMM_DESTDIR/$litmus.out
+then
+	:
+else
+	echo ' !!! Verification error' $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	then
+		echo ' !!! Verification error' >> $LKMM_DESTDIR/$litmus.out 2>&1
+	fi
+	exit 255
+fi
+if test "$outcome" = DEADLOCK
+then
+	if grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q 'Never 0 0$'
+	then
+		ret=0
+	else
+		echo " !!! Unexpected non-$outcome verification" $litmus
+		if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+		then
+			echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+		fi
+		ret=1
+	fi
+elif grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q $outcome || test "$outcome" = Maybe
+then
+	ret=0
+else
+	echo " !!! Unexpected non-$outcome verification" $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	then
+		echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+	fi
+	ret=1
+fi
+tail -2 $LKMM_DESTDIR/$litmus.out | head -1
+exit $ret
diff --git a/tools/memory-model/scripts/newlitmushist.sh b/tools/memory-model/scripts/newlitmushist.sh
new file mode 100755
index 000000000000..991f8f814881
--- /dev/null
+++ b/tools/memory-model/scripts/newlitmushist.sh
@@ -0,0 +1,61 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests matching the specified criteria
+# that do not already have a corresponding .litmus.out file, and does
+# not judge the result.
+#
+# sh newlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+. scripts/parseargs.sh
+
+T=/tmp/newlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Run scripts/initlitmushist.sh first, need litmus repo.
+	exit 1
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+
+# Form full list of litmus tests with no more than the specified
+# number of processes (per the --procs argument).
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C-all
+xargs < $T/list-C-all -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+# Form list of new tests.  Note: This does not handle litmus-test deletion!
+sort $T/list-C-already $T/list-C-short | uniq -u > $T/list-C-new
+
+# Form list of litmus tests that have changed since the last run.
+sed < $T/list-C-short -e 's,^.*$,if test & -nt '"$LKMM_DESTDIR"'/&.out; then echo &; fi,' > $T/list-C-script
+sh $T/list-C-script > $T/list-C-newer
+
+# Merge the list of new and of updated litmus tests: These must be (re)run.
+sort -u $T/list-C-new $T/list-C-newer > $T/list-C-needed
+
+scripts/runlitmushist.sh < $T/list-C-needed
+
+exit 0
diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
new file mode 100755
index 000000000000..96b307c8d64a
--- /dev/null
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -0,0 +1,126 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# the corresponding .litmus.out file, and does not judge the result.
+#
+# . scripts/parseargs.sh
+#
+# Include into other Linux kernel tools/memory-model scripts.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/parseargs.sh.$$
+mkdir $T
+
+# Initialize one parameter: initparam name default
+initparam () {
+	echo if test -z '"$'$1'"' > $T/s
+	echo then >> $T/s
+	echo	$1='"'$2'"' >> $T/s
+	echo	export $1 >> $T/s
+	echo fi >> $T/s
+	echo $1_DEF='$'$1  >> $T/s
+	. $T/s
+}
+
+initparam LKMM_DESTDIR "."
+initparam LKMM_HERD_OPTIONS "-conf linux-kernel.cfg"
+initparam LKMM_JOBS `getconf _NPROCESSORS_ONLN`
+initparam LKMM_PROCS "3"
+initparam LKMM_TIMEOUT "1m"
+
+scriptname=$0
+
+usagehelp () {
+	echo "Usage $scriptname [ arguments ]"
+	echo "      --destdir path (place for .litmus.out, default by .litmus)"
+	echo "      --herdopts -conf linux-kernel.cfg ..."
+	echo "      --jobs N (number of jobs, default one per CPU)"
+	echo "      --procs N (litmus tests with at most this many processes)"
+	echo "      --timeout N (herd7 timeout (e.g., 10s, 1m, 2hr, 1d, '')"
+	echo "Defaults: --destdir '$LKMM_DESTDIR_DEF' --herdopts '$LKMM_HERD_OPTIONS_DEF' --jobs '$LKMM_JOBS_DEF' --procs '$LKMM_PROCS_DEF' --timeout '$LKMM_TIMEOUT_DEF'"
+	exit 1
+}
+
+usage () {
+	usagehelp 1>&2
+}
+
+# checkarg --argname argtype $# arg mustmatch cannotmatch
+checkarg () {
+	if test $3 -le 1
+	then
+		echo $1 needs argument $2 matching \"$5\"
+		usage
+	fi
+	if echo "$4" | grep -q -e "$5"
+	then
+		:
+	else
+		echo $1 $2 \"$4\" must match \"$5\"
+		usage
+	fi
+	if echo "$4" | grep -q -e "$6"
+	then
+		echo $1 $2 \"$4\" must not match \"$6\"
+		usage
+	fi
+}
+
+while test $# -gt 0
+do
+	case "$1" in
+	--destdir)
+		checkarg --destdir "(path to directory)" "$#" "$2" '.\+' '^--'
+		LKMM_DESTDIR="$2"
+		mkdir $LKMM_DESTDIR > /dev/null 2>&1
+		if ! test -e "$LKMM_DESTDIR"
+		then
+			echo "Cannot create directory --destdir '$LKMM_DESTDIR'"
+			usage
+		fi
+		if test -d "$LKMM_DESTDIR" -a -w "$LKMM_DESTDIR" -a -x "$LKMM_DESTDIR"
+		then
+			:
+		else
+			echo "Directory --destdir '$LKMM_DESTDIR' insufficient permissions to create files"
+			usage
+		fi
+		shift
+		;;
+	--herdopts|--herdopt)
+		checkarg --destdir "(herd options)" "$#" "$2" '.*' '^--'
+		LKMM_HERD_OPTIONS="$2"
+		shift
+		;;
+	--jobs|--job)
+		checkarg --jobs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+		LKMM_JOBS="$2"
+		shift
+		;;
+	--procs|--proc)
+		checkarg --procs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+		LKMM_PROCS="$2"
+		shift
+		;;
+	--timeout)
+		checkarg --timeout "(timeout spec)" "$#" "$2" '^\([0-9]\+[smhd]\?\|\)$' '^--'
+		LKMM_TIMEOUT="$2"
+		shift
+		;;
+	*)
+		echo Unknown argument $1
+		usage
+		;;
+	esac
+	shift
+done
+if test -z "$LKMM_TIMEOUT"
+then
+	LKMM_TIMEOUT_CMD=""; export LKMM_TIMEOUT_CMD
+else
+	LKMM_TIMEOUT_CMD="timeout $LKMM_TIMEOUT"; export LKMM_TIMEOUT_CMD
+fi
+rm -rf $T
diff --git a/tools/memory-model/scripts/runlitmushist.sh b/tools/memory-model/scripts/runlitmushist.sh
new file mode 100755
index 000000000000..e507f5f933d5
--- /dev/null
+++ b/tools/memory-model/scripts/runlitmushist.sh
@@ -0,0 +1,87 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests specified on standard input, using up
+# to the specified number of CPUs (defaulting to all of them) and placing
+# the results in the specified directory (defaulting to the same place
+# the litmus test came from).
+#
+# sh runlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# This script uses environment variables produced by parseargs.sh.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/runlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Directory \"litmus\" missing, aborting run.
+	exit 1
+fi
+
+# Prefixes for per-CPU scripts
+for ((i=0;i<$LKMM_JOBS;i++))
+do
+	echo dir="$LKMM_DESTDIR" > $T/$i.sh
+	echo T=$T >> $T/$i.sh
+	echo herdoptions=\"$LKMM_HERD_OPTIONS\" >> $T/$i.sh
+	cat << '___EOF___' >> $T/$i.sh
+	runtest () {
+		echo ' ... ' /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 '>' $dir/$1.out '2>&1'
+		if /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 > $dir/$1.out 2>&1
+		then
+			if ! grep -q '^Observation ' $dir/$1.out
+			then
+				echo ' !!! Herd failed, no Observation:' $1
+			fi
+		else
+			exitcode=$?
+			if test "$exitcode" -eq 124
+			then
+				exitmsg="timed out"
+			else
+				exitmsg="failed, exit code $exitcode"
+			fi
+			echo ' !!! Herd' ${exitmsg}: $1
+		fi
+	}
+___EOF___
+done
+
+awk -v q="'" -v b='\\' '
+{
+	print "echo `grep " q "^P[0-9]" b "+(" q " " $0 " | tail -1 | sed -e " q "s/^P" b "([0-9]" b "+" b ")(.*$/" b "1/" q "` " $0
+}' | bash |
+sort -k1n |
+awk -v ncpu=$LKMM_JOBS -v t=$T '
+{
+	print "runtest " $2 >> t "/" NR % ncpu ".sh";
+}
+
+END {
+	for (i = 0; i < ncpu; i++) {
+		print "sh " t "/" i ".sh > " t "/" i ".sh.out 2>&1 &";
+		close(t "/" i ".sh");
+	}
+	print "wait";
+}' | sh
+cat $T/*.sh.out
+if grep -q '!!!' $T/*.sh.out
+then
+	echo ' ---' Summary: 1>&2
+	grep '!!!' $T/*.sh.out 1>&2
+	nfail="`grep '!!!' $T/*.sh.out | wc -l`"
+	echo 'Number of failed herd runs (e.g., timeout): ' $nfail 1>&2
+	exit 1
+else
+	echo All runs completed successfully. 1>&2
+	exit 0
+fi
-- 
2.17.1

[tip:locking/core] tools/memory-model: Add scripts to check github litmus tests

[tip-bot for Paul E. McKenney]

Commit-ID:  e188d24a382d609ec7ca6c1a00396202565b7831
Gitweb:     https://git.kernel.org/tip/e188d24a382d609ec7ca6c1a00396202565b7831
Author:     Paul E. McKenney <paulmck@linux.vnet.ibm.com>
AuthorDate: Mon, 3 Dec 2018 15:04:50 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 4 Dec 2018 07:29:52 +0100

tools/memory-model: Add scripts to check github litmus tests

The https://github.com/paulmckrcu/litmus repository contains a large
number of C-language litmus tests that include "Result:" comments
predicting the verification result.  This commit adds a number of scripts
that run tests on these litmus tests:

checkghlitmus.sh:
	Runs all litmus tests in the https://github.com/paulmckrcu/litmus
        archive that are C-language and that have "Result:" comment lines
	documenting expected results, comparing the actual results to
	those expected.  Clones the repository if it has not already
	been cloned into the "tools/memory-model/litmus" directory.

initlitmushist.sh
	Run all litmus tests having no more than the specified number
	of processes given a specified timeout, recording the results in
	.litmus.out files.  Clones the repository if it has not already
	been cloned into the "tools/memory-model/litmus" directory.

newlitmushist.sh
	For all new or updated litmus tests having no more than the
	specified number of processes given a specified timeout, run
	and record the results in .litmus.out files.

checklitmushist.sh
	Run all litmus tests having .litmus.out files from previous
	initlitmushist.sh or newlitmushist.sh runs, comparing the
	herd output to that of the original runs.

The above scripts will run litmus tests concurrently, by default with
one job per available CPU.  Giving any of these scripts the --help
argument will cause them to print usage information.

This commit also adds a number of helper scripts that are not intended
to be invoked from the command line:

cmplitmushist.sh: Compare the output of two different runs of the same
	litmus test.

judgelitmus.sh: Compare the output of a litmus test to its "Result:"
	comment line.

parseargs.sh: Parse command-line arguments.

runlitmushist.sh: Run the litmus tests whose pathnames are provided one
	per line on standard input.

While in the area, this commit also makes the existing checklitmus.sh
and checkalllitmus.sh scripts use parseargs.sh in order to provide a
bit of uniformity.  In addition, per-litmus-test status output is directed
to stdout, while end-of-test summary information is directed to stderr.
Finally, the error flag standardizes on "!!!" to assist those familiar
with rcutorture output.

The defaults for the parseargs.sh arguments may be overridden by using
environment variables: LKMM_DESTDIR for --destdir, LKMM_HERD_OPTIONS
for --herdoptions, LKMM_JOBS for --jobs, LKMM_PROCS for --procs, and
LKMM_TIMEOUT for --timeout.

[ paulmck: History-check summary-line changes per Alan Stern feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20181203230451.28921-2-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 tools/memory-model/.gitignore                 |   1 +
 tools/memory-model/README                     |   2 +
 tools/memory-model/scripts/README             |  70 ++++++++++++++
 tools/memory-model/scripts/checkalllitmus.sh  |  53 +++++------
 tools/memory-model/scripts/checkghlitmus.sh   |  65 +++++++++++++
 tools/memory-model/scripts/checklitmus.sh     |  74 +++------------
 tools/memory-model/scripts/checklitmushist.sh |  60 ++++++++++++
 tools/memory-model/scripts/cmplitmushist.sh   |  87 ++++++++++++++++++
 tools/memory-model/scripts/initlitmushist.sh  |  68 ++++++++++++++
 tools/memory-model/scripts/judgelitmus.sh     |  78 ++++++++++++++++
 tools/memory-model/scripts/newlitmushist.sh   |  61 +++++++++++++
 tools/memory-model/scripts/parseargs.sh       | 126 ++++++++++++++++++++++++++
 tools/memory-model/scripts/runlitmushist.sh   |  87 ++++++++++++++++++
 13 files changed, 739 insertions(+), 93 deletions(-)

diff --git a/tools/memory-model/.gitignore b/tools/memory-model/.gitignore
new file mode 100644
index 000000000000..b1d34c52f3c3
--- /dev/null
+++ b/tools/memory-model/.gitignore
@@ -0,0 +1 @@
+litmus
diff --git a/tools/memory-model/README b/tools/memory-model/README
index acf9077cffaa..0f2c366518c6 100644
--- a/tools/memory-model/README
+++ b/tools/memory-model/README
@@ -156,6 +156,8 @@ lock.cat
 README
 	This file.
 
+scripts	Various scripts, see scripts/README.
+
 
 ===========
 LIMITATIONS
diff --git a/tools/memory-model/scripts/README b/tools/memory-model/scripts/README
new file mode 100644
index 000000000000..29375a1fbbfa
--- /dev/null
+++ b/tools/memory-model/scripts/README
@@ -0,0 +1,70 @@
+			============
+			LKMM SCRIPTS
+			============
+
+
+These scripts are run from the tools/memory-model directory.
+
+checkalllitmus.sh
+
+	Run all litmus tests in the litmus-tests directory, checking
+	the results against the expected results recorded in the
+	"Result:" comment lines.
+
+checkghlitmus.sh
+
+	Run all litmus tests in the https://github.com/paulmckrcu/litmus
+	archive that are C-language and that have "Result:" comment lines
+	documenting expected results, comparing the actual results to
+	those expected.
+
+checklitmushist.sh
+
+	Run all litmus tests having .litmus.out files from previous
+	initlitmushist.sh or newlitmushist.sh runs, comparing the
+	herd output to that of the original runs.
+
+checklitmus.sh
+
+	Check a single litmus test against its "Result:" expected result.
+
+cmplitmushist.sh
+
+	Compare output from two different runs of the same litmus tests,
+	with the absolute pathnames of the tests to run provided one
+	name per line on standard input.  Not normally run manually,
+	provided instead for use by other scripts.
+
+initlitmushist.sh
+
+	Run all litmus tests having no more than the specified number
+	of processes given a specified timeout, recording the results
+	in .litmus.out files.
+
+judgelitmus.sh
+
+	Given a .litmus file and its .litmus.out herd output, check the
+	.litmus.out file against the .litmus file's "Result:" comment to
+	judge whether the test ran correctly.  Not normally run manually,
+	provided instead for use by other scripts.
+
+newlitmushist.sh
+
+	For all new or updated litmus tests having no more than the
+	specified number of processes given a specified timeout, run
+	and record the results in .litmus.out files.
+
+parseargs.sh
+
+	Parse command-line arguments.  Not normally run manually,
+	provided instead for use by other scripts.
+
+runlitmushist.sh
+
+	Run the litmus tests whose absolute pathnames are provided one
+	name per line on standard input.  Not normally run manually,
+	provided instead for use by other scripts.
+
+README
+
+	This file
diff --git a/tools/memory-model/scripts/checkalllitmus.sh b/tools/memory-model/scripts/checkalllitmus.sh
index ca528f9a24d4..b35fcd61ecf6 100755
--- a/tools/memory-model/scripts/checkalllitmus.sh
+++ b/tools/memory-model/scripts/checkalllitmus.sh
@@ -1,42 +1,27 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
 #
-# Run herd tests on all .litmus files in the specified directory (which
-# defaults to litmus-tests) and check each file's result against a "Result:"
-# comment within that litmus test.  If the verification result does not
-# match that specified in the litmus test, this script prints an error
-# message prefixed with "^^^".  It also outputs verification results to
-# a file whose name is that of the specified litmus test, but with ".out"
-# appended.
+# Run herd tests on all .litmus files in the litmus-tests directory
+# and check each file's result against a "Result:" comment within that
+# litmus test.  If the verification result does not match that specified
+# in the litmus test, this script prints an error message prefixed with
+# "^^^".  It also outputs verification results to a file whose name is
+# that of the specified litmus test, but with ".out" appended.
 #
 # Usage:
-#	checkalllitmus.sh [ directory ]
+#	checkalllitmus.sh
 #
-# The LINUX_HERD_OPTIONS environment variable may be used to specify
-# arguments to herd, whose default is defined by the checklitmus.sh script.
-# Thus, one would normally run this in the directory containing the memory
-# model, specifying the pathname of the litmus test to check.
+# Run this in the directory containing the memory model.
 #
 # This script makes no attempt to run the litmus tests concurrently.
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
 # Copyright IBM Corporation, 2018
 #
 # Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
-litmusdir=${1-litmus-tests}
+. scripts/parseargs.sh
+
+litmusdir=litmus-tests
 if test -d "$litmusdir" -a -r "$litmusdir" -a -x "$litmusdir"
 then
 	:
@@ -45,6 +30,14 @@ else
 	exit 255
 fi
 
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find $litmusdir -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
 # Find the checklitmus script.  If it is not where we expect it, then
 # assume that the caller has the PATH environment variable set
 # appropriately.
@@ -57,7 +50,7 @@ fi
 
 # Run the script on all the litmus tests in the specified directory
 ret=0
-for i in litmus-tests/*.litmus
+for i in $litmusdir/*.litmus
 do
 	if ! $clscript $i
 	then
@@ -66,8 +59,8 @@ do
 done
 if test "$ret" -ne 0
 then
-	echo " ^^^ VERIFICATION MISMATCHES"
+	echo " ^^^ VERIFICATION MISMATCHES" 1>&2
 else
-	echo All litmus tests verified as was expected.
+	echo All litmus tests verified as was expected. 1>&2
 fi
 exit $ret
diff --git a/tools/memory-model/scripts/checkghlitmus.sh b/tools/memory-model/scripts/checkghlitmus.sh
new file mode 100644
index 000000000000..6589fbb6f653
--- /dev/null
+++ b/tools/memory-model/scripts/checkghlitmus.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests having a maximum number of processes
+# to run, defaults to 6.
+#
+# sh checkghlitmus.sh
+#
+# Run from the Linux kernel tools/memory-model directory.  See the
+# parseargs.sh scripts for arguments.
+
+. scripts/parseargs.sh
+
+T=/tmp/checkghlitmus.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# Clone the repository if it is not already present.
+if test -d litmus
+then
+	:
+else
+	git clone https://github.com/paulmckrcu/litmus
+	( cd litmus; git checkout origin/master )
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+
+# Create a list of C-language litmus tests with "Result:" commands and
+# no more than the specified number of processes.
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+xargs < $T/list-C -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' > $T/list-C-result
+xargs < $T/list-C-result -r grep -L "^P${LKMM_PROCS}" > $T/list-C-result-short
+
+# Form list of tests without corresponding .litmus.out files
+sort $T/list-C-already $T/list-C-result-short | uniq -u > $T/list-C-needed
+
+# Run any needed tests.
+if scripts/runlitmushist.sh < $T/list-C-needed > $T/run.stdout 2> $T/run.stderr
+then
+	errs=
+else
+	errs=1
+fi
+
+sed < $T/list-C-result-short -e 's,^,scripts/judgelitmus.sh ,' |
+	sh > $T/judge.stdout 2> $T/judge.stderr
+
+if test -n "$errs"
+then
+	cat $T/run.stderr 1>&2
+fi
+grep '!!!' $T/judge.stdout
diff --git a/tools/memory-model/scripts/checklitmus.sh b/tools/memory-model/scripts/checklitmus.sh
index bf12a75c0719..dd08801a30b0 100755
--- a/tools/memory-model/scripts/checklitmus.sh
+++ b/tools/memory-model/scripts/checklitmus.sh
@@ -1,40 +1,24 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
 #
-# Run a herd test and check the result against a "Result:" comment within
-# the litmus test.  If the verification result does not match that specified
-# in the litmus test, this script prints an error message prefixed with
-# "^^^" and exits with a non-zero status.  It also outputs verification
+# Run a herd test and invokes judgelitmus.sh to check the result against
+# a "Result:" comment within the litmus test.  It also outputs verification
 # results to a file whose name is that of the specified litmus test, but
 # with ".out" appended.
 #
 # Usage:
 #	checklitmus.sh file.litmus
 #
-# The LINUX_HERD_OPTIONS environment variable may be used to specify
-# arguments to herd, which default to "-conf linux-kernel.cfg".  Thus,
-# one would normally run this in the directory containing the memory model,
-# specifying the pathname of the litmus test to check.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.  The caller is expected to have
+# properly set up the LKMM environment variables.
 #
 # Copyright IBM Corporation, 2018
 #
 # Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
 litmus=$1
-herdoptions=${LINUX_HERD_OPTIONS--conf linux-kernel.cfg}
+herdoptions=${LKMM_HERD_OPTIONS--conf linux-kernel.cfg}
 
 if test -f "$litmus" -a -r "$litmus"
 then
@@ -43,44 +27,8 @@ else
 	echo ' --- ' error: \"$litmus\" is not a readable file
 	exit 255
 fi
-if grep -q '^ \* Result: ' $litmus
-then
-	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
-else
-	outcome=specified
-fi
 
-echo Herd options: $herdoptions > $litmus.out
-/usr/bin/time herd7 -o ~/tmp $herdoptions $litmus >> $litmus.out 2>&1
-grep "Herd options:" $litmus.out
-grep '^Observation' $litmus.out
-if grep -q '^Observation' $litmus.out
-then
-	:
-else
-	cat $litmus.out
-	echo ' ^^^ Verification error'
-	echo ' ^^^ Verification error' >> $litmus.out 2>&1
-	exit 255
-fi
-if test "$outcome" = DEADLOCK
-then
-	echo grep 3 and 4
-	if grep '^Observation' $litmus.out | grep -q 'Never 0 0$'
-	then
-		ret=0
-	else
-		echo " ^^^ Unexpected non-$outcome verification"
-		echo " ^^^ Unexpected non-$outcome verification" >> $litmus.out 2>&1
-		ret=1
-	fi
-elif grep '^Observation' $litmus.out | grep -q $outcome || test "$outcome" = Maybe
-then
-	ret=0
-else
-	echo " ^^^ Unexpected non-$outcome verification"
-	echo " ^^^ Unexpected non-$outcome verification" >> $litmus.out 2>&1
-	ret=1
-fi
-tail -2 $litmus.out | head -1
-exit $ret
+echo Herd options: $herdoptions > $LKMM_DESTDIR/$litmus.out
+/usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $litmus >> $LKMM_DESTDIR/$litmus.out 2>&1
+
+scripts/judgelitmus.sh $litmus
diff --git a/tools/memory-model/scripts/checklitmushist.sh b/tools/memory-model/scripts/checklitmushist.sh
new file mode 100644
index 000000000000..1d210ffb7c8a
--- /dev/null
+++ b/tools/memory-model/scripts/checklitmushist.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Reruns the C-language litmus tests previously run that match the
+# specified criteria, and compares the result to that of the previous
+# runs from initlitmushist.sh and/or newlitmushist.sh.
+#
+# sh checklitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+. scripts/parseargs.sh
+
+T=/tmp/checklitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Run scripts/initlitmushist.sh first, need litmus repo.
+	exit 1
+fi
+
+# Create the results directory and populate it with subdirectories.
+# The initial output is created here to avoid clobbering the output
+# generated earlier.
+mkdir $T/results
+find litmus -type d -print | ( cd $T/results; sed -e 's/^/mkdir -p /' | sh )
+
+# Create the list of litmus tests already run, then remove those that
+# are excluded by this run's --procs argument.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+xargs < $T/list-C-already -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+# Redirect output, run tests, then restore destination directory.
+destdir="$LKMM_DESTDIR"
+LKMM_DESTDIR=$T/results; export LKMM_DESTDIR
+scripts/runlitmushist.sh < $T/list-C-short > $T/runlitmushist.sh.out 2>&1
+LKMM_DESTDIR="$destdir"; export LKMM_DESTDIR
+
+# Move the newly generated .litmus.out files to .litmus.out.new files
+# in the destination directory.
+cdir=`pwd`
+ddir=`awk -v c="$cdir" -v d="$LKMM_DESTDIR" \
+	'END { if (d ~ /^\//) print d; else print c "/" d; }' < /dev/null`
+( cd $T/results; find litmus -type f -name '*.litmus.out' -print |
+  sed -e 's,^.*$,cp & '"$ddir"'/&.new,' | sh )
+
+sed < $T/list-C-short -e 's,^,'"$LKMM_DESTDIR/"',' |
+	sh scripts/cmplitmushist.sh
+exit $?
diff --git a/tools/memory-model/scripts/cmplitmushist.sh b/tools/memory-model/scripts/cmplitmushist.sh
new file mode 100644
index 000000000000..0f498aeeccf5
--- /dev/null
+++ b/tools/memory-model/scripts/cmplitmushist.sh
@@ -0,0 +1,87 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Compares .out and .out.new files for each name on standard input,
+# one full pathname per line.  Outputs comparison results followed by
+# a summary.
+#
+# sh cmplitmushist.sh
+
+T=/tmp/cmplitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# comparetest oldpath newpath
+perfect=0
+obsline=0
+noobsline=0
+obsresult=0
+badcompare=0
+comparetest () {
+	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $1 > $T/oldout
+	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $2 > $T/newout
+	if cmp -s $T/oldout $T/newout && grep -q '^Observation' $1
+	then
+		echo Exact output match: $2
+		perfect=`expr "$perfect" + 1`
+		return 0
+	fi
+
+	grep '^Observation' $1 > $T/oldout
+	grep '^Observation' $2 > $T/newout
+	if test -s $T/oldout -o -s $T/newout
+	then
+		if cmp -s $T/oldout $T/newout
+		then
+			echo Matching Observation result and counts: $2
+			obsline=`expr "$obsline" + 1`
+			return 0
+		fi
+	else
+		echo Missing Observation line "(e.g., herd7 timeout)": $2
+		noobsline=`expr "$noobsline" + 1`
+		return 0
+	fi
+
+	grep '^Observation' $1 | awk '{ print $3 }' > $T/oldout
+	grep '^Observation' $2 | awk '{ print $3 }' > $T/newout
+	if cmp -s $T/oldout $T/newout
+	then
+		echo Matching Observation Always/Sometimes/Never result: $2
+		obsresult=`expr "$obsresult" + 1`
+		return 0
+	fi
+	echo ' !!!' Result changed: $2
+	badcompare=`expr "$badcompare" + 1`
+	return 1
+}
+
+sed -e 's/^.*$/comparetest &.out &.out.new/' > $T/cmpscript
+. $T/cmpscript > $T/cmpscript.out
+cat $T/cmpscript.out
+
+echo ' ---' Summary: 1>&2
+grep '!!!' $T/cmpscript.out 1>&2
+if test "$perfect" -ne 0
+then
+	echo Exact output matches: $perfect 1>&2
+fi
+if test "$obsline" -ne 0
+then
+	echo Matching Observation result and counts: $obsline 1>&2
+fi
+if test "$noobsline" -ne 0
+then
+	echo Missing Observation line "(e.g., herd7 timeout)": $noobsline 1>&2
+fi
+if test "$obsresult" -ne 0
+then
+	echo Matching Observation Always/Sometimes/Never result: $obsresult 1>&2
+fi
+if test "$badcompare" -ne 0
+then
+	echo "!!!" Result changed: $badcompare 1>&2
+	exit 1
+fi
+
+exit 0
diff --git a/tools/memory-model/scripts/initlitmushist.sh b/tools/memory-model/scripts/initlitmushist.sh
new file mode 100644
index 000000000000..956b6957484d
--- /dev/null
+++ b/tools/memory-model/scripts/initlitmushist.sh
@@ -0,0 +1,68 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests matching the specified criteria.
+# Generates the output for each .litmus file into a corresponding
+# .litmus.out file, and does not judge the result.
+#
+# sh initlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# This script can consume significant wallclock time and CPU, especially as
+# the value of --procs rises.  On a four-core (eight hardware threads)
+# 2.5GHz x86 with a one-minute per-run timeout:
+#
+# --procs wallclock CPU		timeouts	tests
+#	1 0m11.241s 0m1.086s           0	   19
+#	2 1m12.598s 2m8.459s           2	  393
+#	3 1m30.007s 6m2.479s           4	 2291
+#	4 3m26.042s 18m5.139s	       9	 3217
+#	5 4m26.661s 23m54.128s	      13	 3784
+#	6 4m41.900s 26m4.721s         13	 4352
+#	7 5m51.463s 35m50.868s        13	 4626
+#	8 10m5.235s 68m43.672s        34	 5117
+#	9 15m57.80s 105m58.101s       69	 5156
+#      10 16m14.13s 103m35.009s       69         5165
+#      20 27m48.55s 198m3.286s       156         5269
+#
+# Increasing the timeout on the 20-process run to five minutes increases
+# the runtime to about 90 minutes with the CPU time rising to about
+# 10 hours.  On the other hand, it decreases the number of timeouts to 101.
+#
+# Note that there are historical tests for which herd7 will fail
+# completely, for example, litmus/manual/atomic/C-unlock-wait-00.litmus
+# contains a call to spin_unlock_wait(), which no longer exists in either
+# the kernel or LKMM.
+
+. scripts/parseargs.sh
+
+T=/tmp/initlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	git clone https://github.com/paulmckrcu/litmus
+	( cd litmus; git checkout origin/master )
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests with no more than the
+# specified number of processes (per the --procs argument).
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+xargs < $T/list-C -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+scripts/runlitmushist.sh < $T/list-C-short
+
+exit 0
diff --git a/tools/memory-model/scripts/judgelitmus.sh b/tools/memory-model/scripts/judgelitmus.sh
new file mode 100644
index 000000000000..0cc63875e395
--- /dev/null
+++ b/tools/memory-model/scripts/judgelitmus.sh
@@ -0,0 +1,78 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Given a .litmus test and the corresponding .litmus.out file, check
+# the .litmus.out file against the "Result:" comment to judge whether
+# the test ran correctly.
+#
+# Usage:
+#	judgelitmus.sh file.litmus
+#
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+litmus=$1
+
+if test -f "$litmus" -a -r "$litmus"
+then
+	:
+else
+	echo ' --- ' error: \"$litmus\" is not a readable file
+	exit 255
+fi
+if test -f "$LKMM_DESTDIR/$litmus".out -a -r "$LKMM_DESTDIR/$litmus".out
+then
+	:
+else
+	echo ' --- ' error: \"$LKMM_DESTDIR/$litmus\".out is not a readable file
+	exit 255
+fi
+if grep -q '^ \* Result: ' $litmus
+then
+	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
+else
+	outcome=specified
+fi
+
+grep '^Observation' $LKMM_DESTDIR/$litmus.out
+if grep -q '^Observation' $LKMM_DESTDIR/$litmus.out
+then
+	:
+else
+	echo ' !!! Verification error' $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	then
+		echo ' !!! Verification error' >> $LKMM_DESTDIR/$litmus.out 2>&1
+	fi
+	exit 255
+fi
+if test "$outcome" = DEADLOCK
+then
+	if grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q 'Never 0 0$'
+	then
+		ret=0
+	else
+		echo " !!! Unexpected non-$outcome verification" $litmus
+		if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+		then
+			echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+		fi
+		ret=1
+	fi
+elif grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q $outcome || test "$outcome" = Maybe
+then
+	ret=0
+else
+	echo " !!! Unexpected non-$outcome verification" $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	then
+		echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+	fi
+	ret=1
+fi
+tail -2 $LKMM_DESTDIR/$litmus.out | head -1
+exit $ret
diff --git a/tools/memory-model/scripts/newlitmushist.sh b/tools/memory-model/scripts/newlitmushist.sh
new file mode 100644
index 000000000000..991f8f814881
--- /dev/null
+++ b/tools/memory-model/scripts/newlitmushist.sh
@@ -0,0 +1,61 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests matching the specified criteria
+# that do not already have a corresponding .litmus.out file, and does
+# not judge the result.
+#
+# sh newlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+. scripts/parseargs.sh
+
+T=/tmp/newlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Run scripts/initlitmushist.sh first, need litmus repo.
+	exit 1
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+
+# Form full list of litmus tests with no more than the specified
+# number of processes (per the --procs argument).
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C-all
+xargs < $T/list-C-all -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+# Form list of new tests.  Note: This does not handle litmus-test deletion!
+sort $T/list-C-already $T/list-C-short | uniq -u > $T/list-C-new
+
+# Form list of litmus tests that have changed since the last run.
+sed < $T/list-C-short -e 's,^.*$,if test & -nt '"$LKMM_DESTDIR"'/&.out; then echo &; fi,' > $T/list-C-script
+sh $T/list-C-script > $T/list-C-newer
+
+# Merge the list of new and of updated litmus tests: These must be (re)run.
+sort -u $T/list-C-new $T/list-C-newer > $T/list-C-needed
+
+scripts/runlitmushist.sh < $T/list-C-needed
+
+exit 0
diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
new file mode 100644
index 000000000000..96b307c8d64a
--- /dev/null
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -0,0 +1,126 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# the corresponding .litmus.out file, and does not judge the result.
+#
+# . scripts/parseargs.sh
+#
+# Include into other Linux kernel tools/memory-model scripts.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/parseargs.sh.$$
+mkdir $T
+
+# Initialize one parameter: initparam name default
+initparam () {
+	echo if test -z '"$'$1'"' > $T/s
+	echo then >> $T/s
+	echo	$1='"'$2'"' >> $T/s
+	echo	export $1 >> $T/s
+	echo fi >> $T/s
+	echo $1_DEF='$'$1  >> $T/s
+	. $T/s
+}
+
+initparam LKMM_DESTDIR "."
+initparam LKMM_HERD_OPTIONS "-conf linux-kernel.cfg"
+initparam LKMM_JOBS `getconf _NPROCESSORS_ONLN`
+initparam LKMM_PROCS "3"
+initparam LKMM_TIMEOUT "1m"
+
+scriptname=$0
+
+usagehelp () {
+	echo "Usage $scriptname [ arguments ]"
+	echo "      --destdir path (place for .litmus.out, default by .litmus)"
+	echo "      --herdopts -conf linux-kernel.cfg ..."
+	echo "      --jobs N (number of jobs, default one per CPU)"
+	echo "      --procs N (litmus tests with at most this many processes)"
+	echo "      --timeout N (herd7 timeout (e.g., 10s, 1m, 2hr, 1d, '')"
+	echo "Defaults: --destdir '$LKMM_DESTDIR_DEF' --herdopts '$LKMM_HERD_OPTIONS_DEF' --jobs '$LKMM_JOBS_DEF' --procs '$LKMM_PROCS_DEF' --timeout '$LKMM_TIMEOUT_DEF'"
+	exit 1
+}
+
+usage () {
+	usagehelp 1>&2
+}
+
+# checkarg --argname argtype $# arg mustmatch cannotmatch
+checkarg () {
+	if test $3 -le 1
+	then
+		echo $1 needs argument $2 matching \"$5\"
+		usage
+	fi
+	if echo "$4" | grep -q -e "$5"
+	then
+		:
+	else
+		echo $1 $2 \"$4\" must match \"$5\"
+		usage
+	fi
+	if echo "$4" | grep -q -e "$6"
+	then
+		echo $1 $2 \"$4\" must not match \"$6\"
+		usage
+	fi
+}
+
+while test $# -gt 0
+do
+	case "$1" in
+	--destdir)
+		checkarg --destdir "(path to directory)" "$#" "$2" '.\+' '^--'
+		LKMM_DESTDIR="$2"
+		mkdir $LKMM_DESTDIR > /dev/null 2>&1
+		if ! test -e "$LKMM_DESTDIR"
+		then
+			echo "Cannot create directory --destdir '$LKMM_DESTDIR'"
+			usage
+		fi
+		if test -d "$LKMM_DESTDIR" -a -w "$LKMM_DESTDIR" -a -x "$LKMM_DESTDIR"
+		then
+			:
+		else
+			echo "Directory --destdir '$LKMM_DESTDIR' insufficient permissions to create files"
+			usage
+		fi
+		shift
+		;;
+	--herdopts|--herdopt)
+		checkarg --destdir "(herd options)" "$#" "$2" '.*' '^--'
+		LKMM_HERD_OPTIONS="$2"
+		shift
+		;;
+	--jobs|--job)
+		checkarg --jobs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+		LKMM_JOBS="$2"
+		shift
+		;;
+	--procs|--proc)
+		checkarg --procs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+		LKMM_PROCS="$2"
+		shift
+		;;
+	--timeout)
+		checkarg --timeout "(timeout spec)" "$#" "$2" '^\([0-9]\+[smhd]\?\|\)$' '^--'
+		LKMM_TIMEOUT="$2"
+		shift
+		;;
+	*)
+		echo Unknown argument $1
+		usage
+		;;
+	esac
+	shift
+done
+if test -z "$LKMM_TIMEOUT"
+then
+	LKMM_TIMEOUT_CMD=""; export LKMM_TIMEOUT_CMD
+else
+	LKMM_TIMEOUT_CMD="timeout $LKMM_TIMEOUT"; export LKMM_TIMEOUT_CMD
+fi
+rm -rf $T
diff --git a/tools/memory-model/scripts/runlitmushist.sh b/tools/memory-model/scripts/runlitmushist.sh
new file mode 100644
index 000000000000..e507f5f933d5
--- /dev/null
+++ b/tools/memory-model/scripts/runlitmushist.sh
@@ -0,0 +1,87 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests specified on standard input, using up
+# to the specified number of CPUs (defaulting to all of them) and placing
+# the results in the specified directory (defaulting to the same place
+# the litmus test came from).
+#
+# sh runlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# This script uses environment variables produced by parseargs.sh.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/runlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Directory \"litmus\" missing, aborting run.
+	exit 1
+fi
+
+# Prefixes for per-CPU scripts
+for ((i=0;i<$LKMM_JOBS;i++))
+do
+	echo dir="$LKMM_DESTDIR" > $T/$i.sh
+	echo T=$T >> $T/$i.sh
+	echo herdoptions=\"$LKMM_HERD_OPTIONS\" >> $T/$i.sh
+	cat << '___EOF___' >> $T/$i.sh
+	runtest () {
+		echo ' ... ' /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 '>' $dir/$1.out '2>&1'
+		if /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 > $dir/$1.out 2>&1
+		then
+			if ! grep -q '^Observation ' $dir/$1.out
+			then
+				echo ' !!! Herd failed, no Observation:' $1
+			fi
+		else
+			exitcode=$?
+			if test "$exitcode" -eq 124
+			then
+				exitmsg="timed out"
+			else
+				exitmsg="failed, exit code $exitcode"
+			fi
+			echo ' !!! Herd' ${exitmsg}: $1
+		fi
+	}
+___EOF___
+done
+
+awk -v q="'" -v b='\\' '
+{
+	print "echo `grep " q "^P[0-9]" b "+(" q " " $0 " | tail -1 | sed -e " q "s/^P" b "([0-9]" b "+" b ")(.*$/" b "1/" q "` " $0
+}' | bash |
+sort -k1n |
+awk -v ncpu=$LKMM_JOBS -v t=$T '
+{
+	print "runtest " $2 >> t "/" NR % ncpu ".sh";
+}
+
+END {
+	for (i = 0; i < ncpu; i++) {
+		print "sh " t "/" i ".sh > " t "/" i ".sh.out 2>&1 &";
+		close(t "/" i ".sh");
+	}
+	print "wait";
+}' | sh
+cat $T/*.sh.out
+if grep -q '!!!' $T/*.sh.out
+then
+	echo ' ---' Summary: 1>&2
+	grep '!!!' $T/*.sh.out 1>&2
+	nfail="`grep '!!!' $T/*.sh.out | wc -l`"
+	echo 'Number of failed herd runs (e.g., timeout): ' $nfail 1>&2
+	exit 1
+else
+	echo All runs completed successfully. 1>&2
+	exit 0
+fi

[tip:locking/core] tools/memory-model: Add scripts to check github litmus tests

[tip-bot for Paul E. McKenney]

Commit-ID:  b02eb5b0961a06561b89f5b7f0dd171b750e5789
Gitweb:     https://git.kernel.org/tip/b02eb5b0961a06561b89f5b7f0dd171b750e5789
Author:     Paul E. McKenney <paulmck@linux.vnet.ibm.com>
AuthorDate: Mon, 3 Dec 2018 15:04:50 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 21 Jan 2019 11:06:59 +0100

tools/memory-model: Add scripts to check github litmus tests

The https://github.com/paulmckrcu/litmus repository contains a large
number of C-language litmus tests that include "Result:" comments
predicting the verification result.  This commit adds a number of scripts
that run tests on these litmus tests:

checkghlitmus.sh:
	Runs all litmus tests in the https://github.com/paulmckrcu/litmus
        archive that are C-language and that have "Result:" comment lines
	documenting expected results, comparing the actual results to
	those expected.  Clones the repository if it has not already
	been cloned into the "tools/memory-model/litmus" directory.

initlitmushist.sh
	Run all litmus tests having no more than the specified number
	of processes given a specified timeout, recording the results in
	.litmus.out files.  Clones the repository if it has not already
	been cloned into the "tools/memory-model/litmus" directory.

newlitmushist.sh
	For all new or updated litmus tests having no more than the
	specified number of processes given a specified timeout, run
	and record the results in .litmus.out files.

checklitmushist.sh
	Run all litmus tests having .litmus.out files from previous
	initlitmushist.sh or newlitmushist.sh runs, comparing the
	herd output to that of the original runs.

The above scripts will run litmus tests concurrently, by default with
one job per available CPU.  Giving any of these scripts the --help
argument will cause them to print usage information.

This commit also adds a number of helper scripts that are not intended
to be invoked from the command line:

cmplitmushist.sh: Compare the output of two different runs of the same
	litmus test.

judgelitmus.sh: Compare the output of a litmus test to its "Result:"
	comment line.

parseargs.sh: Parse command-line arguments.

runlitmushist.sh: Run the litmus tests whose pathnames are provided one
	per line on standard input.

While in the area, this commit also makes the existing checklitmus.sh
and checkalllitmus.sh scripts use parseargs.sh in order to provide a
bit of uniformity.  In addition, per-litmus-test status output is directed
to stdout, while end-of-test summary information is directed to stderr.
Finally, the error flag standardizes on "!!!" to assist those familiar
with rcutorture output.

The defaults for the parseargs.sh arguments may be overridden by using
environment variables: LKMM_DESTDIR for --destdir, LKMM_HERD_OPTIONS
for --herdoptions, LKMM_JOBS for --jobs, LKMM_PROCS for --procs, and
LKMM_TIMEOUT for --timeout.

[ paulmck: History-check summary-line changes per Alan Stern feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20181203230451.28921-2-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 tools/memory-model/.gitignore                 |   1 +
 tools/memory-model/README                     |   2 +
 tools/memory-model/scripts/README             |  70 ++++++++++++++
 tools/memory-model/scripts/checkalllitmus.sh  |  53 +++++------
 tools/memory-model/scripts/checkghlitmus.sh   |  65 +++++++++++++
 tools/memory-model/scripts/checklitmus.sh     |  74 +++------------
 tools/memory-model/scripts/checklitmushist.sh |  60 ++++++++++++
 tools/memory-model/scripts/cmplitmushist.sh   |  87 ++++++++++++++++++
 tools/memory-model/scripts/initlitmushist.sh  |  68 ++++++++++++++
 tools/memory-model/scripts/judgelitmus.sh     |  78 ++++++++++++++++
 tools/memory-model/scripts/newlitmushist.sh   |  61 +++++++++++++
 tools/memory-model/scripts/parseargs.sh       | 126 ++++++++++++++++++++++++++
 tools/memory-model/scripts/runlitmushist.sh   |  87 ++++++++++++++++++
 13 files changed, 739 insertions(+), 93 deletions(-)

diff --git a/tools/memory-model/.gitignore b/tools/memory-model/.gitignore
new file mode 100644
index 000000000000..b1d34c52f3c3
--- /dev/null
+++ b/tools/memory-model/.gitignore
@@ -0,0 +1 @@
+litmus
diff --git a/tools/memory-model/README b/tools/memory-model/README
index acf9077cffaa..0f2c366518c6 100644
--- a/tools/memory-model/README
+++ b/tools/memory-model/README
@@ -156,6 +156,8 @@ lock.cat
 README
 	This file.
 
+scripts	Various scripts, see scripts/README.
+
 
 ===========
 LIMITATIONS
diff --git a/tools/memory-model/scripts/README b/tools/memory-model/scripts/README
new file mode 100644
index 000000000000..29375a1fbbfa
--- /dev/null
+++ b/tools/memory-model/scripts/README
@@ -0,0 +1,70 @@
+			============
+			LKMM SCRIPTS
+			============
+
+
+These scripts are run from the tools/memory-model directory.
+
+checkalllitmus.sh
+
+	Run all litmus tests in the litmus-tests directory, checking
+	the results against the expected results recorded in the
+	"Result:" comment lines.
+
+checkghlitmus.sh
+
+	Run all litmus tests in the https://github.com/paulmckrcu/litmus
+	archive that are C-language and that have "Result:" comment lines
+	documenting expected results, comparing the actual results to
+	those expected.
+
+checklitmushist.sh
+
+	Run all litmus tests having .litmus.out files from previous
+	initlitmushist.sh or newlitmushist.sh runs, comparing the
+	herd output to that of the original runs.
+
+checklitmus.sh
+
+	Check a single litmus test against its "Result:" expected result.
+
+cmplitmushist.sh
+
+	Compare output from two different runs of the same litmus tests,
+	with the absolute pathnames of the tests to run provided one
+	name per line on standard input.  Not normally run manually,
+	provided instead for use by other scripts.
+
+initlitmushist.sh
+
+	Run all litmus tests having no more than the specified number
+	of processes given a specified timeout, recording the results
+	in .litmus.out files.
+
+judgelitmus.sh
+
+	Given a .litmus file and its .litmus.out herd output, check the
+	.litmus.out file against the .litmus file's "Result:" comment to
+	judge whether the test ran correctly.  Not normally run manually,
+	provided instead for use by other scripts.
+
+newlitmushist.sh
+
+	For all new or updated litmus tests having no more than the
+	specified number of processes given a specified timeout, run
+	and record the results in .litmus.out files.
+
+parseargs.sh
+
+	Parse command-line arguments.  Not normally run manually,
+	provided instead for use by other scripts.
+
+runlitmushist.sh
+
+	Run the litmus tests whose absolute pathnames are provided one
+	name per line on standard input.  Not normally run manually,
+	provided instead for use by other scripts.
+
+README
+
+	This file
diff --git a/tools/memory-model/scripts/checkalllitmus.sh b/tools/memory-model/scripts/checkalllitmus.sh
index ca528f9a24d4..b35fcd61ecf6 100755
--- a/tools/memory-model/scripts/checkalllitmus.sh
+++ b/tools/memory-model/scripts/checkalllitmus.sh
@@ -1,42 +1,27 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
 #
-# Run herd tests on all .litmus files in the specified directory (which
-# defaults to litmus-tests) and check each file's result against a "Result:"
-# comment within that litmus test.  If the verification result does not
-# match that specified in the litmus test, this script prints an error
-# message prefixed with "^^^".  It also outputs verification results to
-# a file whose name is that of the specified litmus test, but with ".out"
-# appended.
+# Run herd tests on all .litmus files in the litmus-tests directory
+# and check each file's result against a "Result:" comment within that
+# litmus test.  If the verification result does not match that specified
+# in the litmus test, this script prints an error message prefixed with
+# "^^^".  It also outputs verification results to a file whose name is
+# that of the specified litmus test, but with ".out" appended.
 #
 # Usage:
-#	checkalllitmus.sh [ directory ]
+#	checkalllitmus.sh
 #
-# The LINUX_HERD_OPTIONS environment variable may be used to specify
-# arguments to herd, whose default is defined by the checklitmus.sh script.
-# Thus, one would normally run this in the directory containing the memory
-# model, specifying the pathname of the litmus test to check.
+# Run this in the directory containing the memory model.
 #
 # This script makes no attempt to run the litmus tests concurrently.
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
 # Copyright IBM Corporation, 2018
 #
 # Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
-litmusdir=${1-litmus-tests}
+. scripts/parseargs.sh
+
+litmusdir=litmus-tests
 if test -d "$litmusdir" -a -r "$litmusdir" -a -x "$litmusdir"
 then
 	:
@@ -45,6 +30,14 @@ else
 	exit 255
 fi
 
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find $litmusdir -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
 # Find the checklitmus script.  If it is not where we expect it, then
 # assume that the caller has the PATH environment variable set
 # appropriately.
@@ -57,7 +50,7 @@ fi
 
 # Run the script on all the litmus tests in the specified directory
 ret=0
-for i in litmus-tests/*.litmus
+for i in $litmusdir/*.litmus
 do
 	if ! $clscript $i
 	then
@@ -66,8 +59,8 @@ do
 done
 if test "$ret" -ne 0
 then
-	echo " ^^^ VERIFICATION MISMATCHES"
+	echo " ^^^ VERIFICATION MISMATCHES" 1>&2
 else
-	echo All litmus tests verified as was expected.
+	echo All litmus tests verified as was expected. 1>&2
 fi
 exit $ret
diff --git a/tools/memory-model/scripts/checkghlitmus.sh b/tools/memory-model/scripts/checkghlitmus.sh
new file mode 100644
index 000000000000..6589fbb6f653
--- /dev/null
+++ b/tools/memory-model/scripts/checkghlitmus.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests having a maximum number of processes
+# to run, defaults to 6.
+#
+# sh checkghlitmus.sh
+#
+# Run from the Linux kernel tools/memory-model directory.  See the
+# parseargs.sh scripts for arguments.
+
+. scripts/parseargs.sh
+
+T=/tmp/checkghlitmus.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# Clone the repository if it is not already present.
+if test -d litmus
+then
+	:
+else
+	git clone https://github.com/paulmckrcu/litmus
+	( cd litmus; git checkout origin/master )
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+
+# Create a list of C-language litmus tests with "Result:" commands and
+# no more than the specified number of processes.
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+xargs < $T/list-C -r egrep -l '^ \* Result: (Never|Sometimes|Always|DEADLOCK)' > $T/list-C-result
+xargs < $T/list-C-result -r grep -L "^P${LKMM_PROCS}" > $T/list-C-result-short
+
+# Form list of tests without corresponding .litmus.out files
+sort $T/list-C-already $T/list-C-result-short | uniq -u > $T/list-C-needed
+
+# Run any needed tests.
+if scripts/runlitmushist.sh < $T/list-C-needed > $T/run.stdout 2> $T/run.stderr
+then
+	errs=
+else
+	errs=1
+fi
+
+sed < $T/list-C-result-short -e 's,^,scripts/judgelitmus.sh ,' |
+	sh > $T/judge.stdout 2> $T/judge.stderr
+
+if test -n "$errs"
+then
+	cat $T/run.stderr 1>&2
+fi
+grep '!!!' $T/judge.stdout
diff --git a/tools/memory-model/scripts/checklitmus.sh b/tools/memory-model/scripts/checklitmus.sh
index bf12a75c0719..dd08801a30b0 100755
--- a/tools/memory-model/scripts/checklitmus.sh
+++ b/tools/memory-model/scripts/checklitmus.sh
@@ -1,40 +1,24 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
 #
-# Run a herd test and check the result against a "Result:" comment within
-# the litmus test.  If the verification result does not match that specified
-# in the litmus test, this script prints an error message prefixed with
-# "^^^" and exits with a non-zero status.  It also outputs verification
+# Run a herd test and invokes judgelitmus.sh to check the result against
+# a "Result:" comment within the litmus test.  It also outputs verification
 # results to a file whose name is that of the specified litmus test, but
 # with ".out" appended.
 #
 # Usage:
 #	checklitmus.sh file.litmus
 #
-# The LINUX_HERD_OPTIONS environment variable may be used to specify
-# arguments to herd, which default to "-conf linux-kernel.cfg".  Thus,
-# one would normally run this in the directory containing the memory model,
-# specifying the pathname of the litmus test to check.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.  The caller is expected to have
+# properly set up the LKMM environment variables.
 #
 # Copyright IBM Corporation, 2018
 #
 # Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
 litmus=$1
-herdoptions=${LINUX_HERD_OPTIONS--conf linux-kernel.cfg}
+herdoptions=${LKMM_HERD_OPTIONS--conf linux-kernel.cfg}
 
 if test -f "$litmus" -a -r "$litmus"
 then
@@ -43,44 +27,8 @@ else
 	echo ' --- ' error: \"$litmus\" is not a readable file
 	exit 255
 fi
-if grep -q '^ \* Result: ' $litmus
-then
-	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
-else
-	outcome=specified
-fi
 
-echo Herd options: $herdoptions > $litmus.out
-/usr/bin/time herd7 -o ~/tmp $herdoptions $litmus >> $litmus.out 2>&1
-grep "Herd options:" $litmus.out
-grep '^Observation' $litmus.out
-if grep -q '^Observation' $litmus.out
-then
-	:
-else
-	cat $litmus.out
-	echo ' ^^^ Verification error'
-	echo ' ^^^ Verification error' >> $litmus.out 2>&1
-	exit 255
-fi
-if test "$outcome" = DEADLOCK
-then
-	echo grep 3 and 4
-	if grep '^Observation' $litmus.out | grep -q 'Never 0 0$'
-	then
-		ret=0
-	else
-		echo " ^^^ Unexpected non-$outcome verification"
-		echo " ^^^ Unexpected non-$outcome verification" >> $litmus.out 2>&1
-		ret=1
-	fi
-elif grep '^Observation' $litmus.out | grep -q $outcome || test "$outcome" = Maybe
-then
-	ret=0
-else
-	echo " ^^^ Unexpected non-$outcome verification"
-	echo " ^^^ Unexpected non-$outcome verification" >> $litmus.out 2>&1
-	ret=1
-fi
-tail -2 $litmus.out | head -1
-exit $ret
+echo Herd options: $herdoptions > $LKMM_DESTDIR/$litmus.out
+/usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $litmus >> $LKMM_DESTDIR/$litmus.out 2>&1
+
+scripts/judgelitmus.sh $litmus
diff --git a/tools/memory-model/scripts/checklitmushist.sh b/tools/memory-model/scripts/checklitmushist.sh
new file mode 100644
index 000000000000..1d210ffb7c8a
--- /dev/null
+++ b/tools/memory-model/scripts/checklitmushist.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Reruns the C-language litmus tests previously run that match the
+# specified criteria, and compares the result to that of the previous
+# runs from initlitmushist.sh and/or newlitmushist.sh.
+#
+# sh checklitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+. scripts/parseargs.sh
+
+T=/tmp/checklitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Run scripts/initlitmushist.sh first, need litmus repo.
+	exit 1
+fi
+
+# Create the results directory and populate it with subdirectories.
+# The initial output is created here to avoid clobbering the output
+# generated earlier.
+mkdir $T/results
+find litmus -type d -print | ( cd $T/results; sed -e 's/^/mkdir -p /' | sh )
+
+# Create the list of litmus tests already run, then remove those that
+# are excluded by this run's --procs argument.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+xargs < $T/list-C-already -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+# Redirect output, run tests, then restore destination directory.
+destdir="$LKMM_DESTDIR"
+LKMM_DESTDIR=$T/results; export LKMM_DESTDIR
+scripts/runlitmushist.sh < $T/list-C-short > $T/runlitmushist.sh.out 2>&1
+LKMM_DESTDIR="$destdir"; export LKMM_DESTDIR
+
+# Move the newly generated .litmus.out files to .litmus.out.new files
+# in the destination directory.
+cdir=`pwd`
+ddir=`awk -v c="$cdir" -v d="$LKMM_DESTDIR" \
+	'END { if (d ~ /^\//) print d; else print c "/" d; }' < /dev/null`
+( cd $T/results; find litmus -type f -name '*.litmus.out' -print |
+  sed -e 's,^.*$,cp & '"$ddir"'/&.new,' | sh )
+
+sed < $T/list-C-short -e 's,^,'"$LKMM_DESTDIR/"',' |
+	sh scripts/cmplitmushist.sh
+exit $?
diff --git a/tools/memory-model/scripts/cmplitmushist.sh b/tools/memory-model/scripts/cmplitmushist.sh
new file mode 100644
index 000000000000..0f498aeeccf5
--- /dev/null
+++ b/tools/memory-model/scripts/cmplitmushist.sh
@@ -0,0 +1,87 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Compares .out and .out.new files for each name on standard input,
+# one full pathname per line.  Outputs comparison results followed by
+# a summary.
+#
+# sh cmplitmushist.sh
+
+T=/tmp/cmplitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# comparetest oldpath newpath
+perfect=0
+obsline=0
+noobsline=0
+obsresult=0
+badcompare=0
+comparetest () {
+	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $1 > $T/oldout
+	grep -v 'maxresident)k\|minor)pagefaults\|^Time' $2 > $T/newout
+	if cmp -s $T/oldout $T/newout && grep -q '^Observation' $1
+	then
+		echo Exact output match: $2
+		perfect=`expr "$perfect" + 1`
+		return 0
+	fi
+
+	grep '^Observation' $1 > $T/oldout
+	grep '^Observation' $2 > $T/newout
+	if test -s $T/oldout -o -s $T/newout
+	then
+		if cmp -s $T/oldout $T/newout
+		then
+			echo Matching Observation result and counts: $2
+			obsline=`expr "$obsline" + 1`
+			return 0
+		fi
+	else
+		echo Missing Observation line "(e.g., herd7 timeout)": $2
+		noobsline=`expr "$noobsline" + 1`
+		return 0
+	fi
+
+	grep '^Observation' $1 | awk '{ print $3 }' > $T/oldout
+	grep '^Observation' $2 | awk '{ print $3 }' > $T/newout
+	if cmp -s $T/oldout $T/newout
+	then
+		echo Matching Observation Always/Sometimes/Never result: $2
+		obsresult=`expr "$obsresult" + 1`
+		return 0
+	fi
+	echo ' !!!' Result changed: $2
+	badcompare=`expr "$badcompare" + 1`
+	return 1
+}
+
+sed -e 's/^.*$/comparetest &.out &.out.new/' > $T/cmpscript
+. $T/cmpscript > $T/cmpscript.out
+cat $T/cmpscript.out
+
+echo ' ---' Summary: 1>&2
+grep '!!!' $T/cmpscript.out 1>&2
+if test "$perfect" -ne 0
+then
+	echo Exact output matches: $perfect 1>&2
+fi
+if test "$obsline" -ne 0
+then
+	echo Matching Observation result and counts: $obsline 1>&2
+fi
+if test "$noobsline" -ne 0
+then
+	echo Missing Observation line "(e.g., herd7 timeout)": $noobsline 1>&2
+fi
+if test "$obsresult" -ne 0
+then
+	echo Matching Observation Always/Sometimes/Never result: $obsresult 1>&2
+fi
+if test "$badcompare" -ne 0
+then
+	echo "!!!" Result changed: $badcompare 1>&2
+	exit 1
+fi
+
+exit 0
diff --git a/tools/memory-model/scripts/initlitmushist.sh b/tools/memory-model/scripts/initlitmushist.sh
new file mode 100644
index 000000000000..956b6957484d
--- /dev/null
+++ b/tools/memory-model/scripts/initlitmushist.sh
@@ -0,0 +1,68 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests matching the specified criteria.
+# Generates the output for each .litmus file into a corresponding
+# .litmus.out file, and does not judge the result.
+#
+# sh initlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# This script can consume significant wallclock time and CPU, especially as
+# the value of --procs rises.  On a four-core (eight hardware threads)
+# 2.5GHz x86 with a one-minute per-run timeout:
+#
+# --procs wallclock CPU		timeouts	tests
+#	1 0m11.241s 0m1.086s           0	   19
+#	2 1m12.598s 2m8.459s           2	  393
+#	3 1m30.007s 6m2.479s           4	 2291
+#	4 3m26.042s 18m5.139s	       9	 3217
+#	5 4m26.661s 23m54.128s	      13	 3784
+#	6 4m41.900s 26m4.721s         13	 4352
+#	7 5m51.463s 35m50.868s        13	 4626
+#	8 10m5.235s 68m43.672s        34	 5117
+#	9 15m57.80s 105m58.101s       69	 5156
+#      10 16m14.13s 103m35.009s       69         5165
+#      20 27m48.55s 198m3.286s       156         5269
+#
+# Increasing the timeout on the 20-process run to five minutes increases
+# the runtime to about 90 minutes with the CPU time rising to about
+# 10 hours.  On the other hand, it decreases the number of timeouts to 101.
+#
+# Note that there are historical tests for which herd7 will fail
+# completely, for example, litmus/manual/atomic/C-unlock-wait-00.litmus
+# contains a call to spin_unlock_wait(), which no longer exists in either
+# the kernel or LKMM.
+
+. scripts/parseargs.sh
+
+T=/tmp/initlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	git clone https://github.com/paulmckrcu/litmus
+	( cd litmus; git checkout origin/master )
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests with no more than the
+# specified number of processes (per the --procs argument).
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C
+xargs < $T/list-C -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+scripts/runlitmushist.sh < $T/list-C-short
+
+exit 0
diff --git a/tools/memory-model/scripts/judgelitmus.sh b/tools/memory-model/scripts/judgelitmus.sh
new file mode 100644
index 000000000000..0cc63875e395
--- /dev/null
+++ b/tools/memory-model/scripts/judgelitmus.sh
@@ -0,0 +1,78 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Given a .litmus test and the corresponding .litmus.out file, check
+# the .litmus.out file against the "Result:" comment to judge whether
+# the test ran correctly.
+#
+# Usage:
+#	judgelitmus.sh file.litmus
+#
+# Run this in the directory containing the memory model, specifying the
+# pathname of the litmus test to check.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+litmus=$1
+
+if test -f "$litmus" -a -r "$litmus"
+then
+	:
+else
+	echo ' --- ' error: \"$litmus\" is not a readable file
+	exit 255
+fi
+if test -f "$LKMM_DESTDIR/$litmus".out -a -r "$LKMM_DESTDIR/$litmus".out
+then
+	:
+else
+	echo ' --- ' error: \"$LKMM_DESTDIR/$litmus\".out is not a readable file
+	exit 255
+fi
+if grep -q '^ \* Result: ' $litmus
+then
+	outcome=`grep -m 1 '^ \* Result: ' $litmus | awk '{ print $3 }'`
+else
+	outcome=specified
+fi
+
+grep '^Observation' $LKMM_DESTDIR/$litmus.out
+if grep -q '^Observation' $LKMM_DESTDIR/$litmus.out
+then
+	:
+else
+	echo ' !!! Verification error' $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	then
+		echo ' !!! Verification error' >> $LKMM_DESTDIR/$litmus.out 2>&1
+	fi
+	exit 255
+fi
+if test "$outcome" = DEADLOCK
+then
+	if grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q 'Never 0 0$'
+	then
+		ret=0
+	else
+		echo " !!! Unexpected non-$outcome verification" $litmus
+		if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+		then
+			echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+		fi
+		ret=1
+	fi
+elif grep '^Observation' $LKMM_DESTDIR/$litmus.out | grep -q $outcome || test "$outcome" = Maybe
+then
+	ret=0
+else
+	echo " !!! Unexpected non-$outcome verification" $litmus
+	if ! grep -q '!!!' $LKMM_DESTDIR/$litmus.out
+	then
+		echo " !!! Unexpected non-$outcome verification" >> $LKMM_DESTDIR/$litmus.out 2>&1
+	fi
+	ret=1
+fi
+tail -2 $LKMM_DESTDIR/$litmus.out | head -1
+exit $ret
diff --git a/tools/memory-model/scripts/newlitmushist.sh b/tools/memory-model/scripts/newlitmushist.sh
new file mode 100644
index 000000000000..991f8f814881
--- /dev/null
+++ b/tools/memory-model/scripts/newlitmushist.sh
@@ -0,0 +1,61 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests matching the specified criteria
+# that do not already have a corresponding .litmus.out file, and does
+# not judge the result.
+#
+# sh newlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# See scripts/parseargs.sh for list of arguments.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+. scripts/parseargs.sh
+
+T=/tmp/newlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Run scripts/initlitmushist.sh first, need litmus repo.
+	exit 1
+fi
+
+# Create any new directories that have appeared in the github litmus
+# repo since the last run.
+if test "$LKMM_DESTDIR" != "."
+then
+	find litmus -type d -print |
+	( cd "$LKMM_DESTDIR"; sed -e 's/^/mkdir -p /' | sh )
+fi
+
+# Create a list of the C-language litmus tests previously run.
+( cd $LKMM_DESTDIR; find litmus -name '*.litmus.out' -print ) |
+	sed -e 's/\.out$//' |
+	xargs -r grep -L "^P${LKMM_PROCS}"> $T/list-C-already
+
+# Form full list of litmus tests with no more than the specified
+# number of processes (per the --procs argument).
+find litmus -name '*.litmus' -exec grep -l -m 1 "^C " {} \; > $T/list-C-all
+xargs < $T/list-C-all -r grep -L "^P${LKMM_PROCS}" > $T/list-C-short
+
+# Form list of new tests.  Note: This does not handle litmus-test deletion!
+sort $T/list-C-already $T/list-C-short | uniq -u > $T/list-C-new
+
+# Form list of litmus tests that have changed since the last run.
+sed < $T/list-C-short -e 's,^.*$,if test & -nt '"$LKMM_DESTDIR"'/&.out; then echo &; fi,' > $T/list-C-script
+sh $T/list-C-script > $T/list-C-newer
+
+# Merge the list of new and of updated litmus tests: These must be (re)run.
+sort -u $T/list-C-new $T/list-C-newer > $T/list-C-needed
+
+scripts/runlitmushist.sh < $T/list-C-needed
+
+exit 0
diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
new file mode 100644
index 000000000000..96b307c8d64a
--- /dev/null
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -0,0 +1,126 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# the corresponding .litmus.out file, and does not judge the result.
+#
+# . scripts/parseargs.sh
+#
+# Include into other Linux kernel tools/memory-model scripts.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/parseargs.sh.$$
+mkdir $T
+
+# Initialize one parameter: initparam name default
+initparam () {
+	echo if test -z '"$'$1'"' > $T/s
+	echo then >> $T/s
+	echo	$1='"'$2'"' >> $T/s
+	echo	export $1 >> $T/s
+	echo fi >> $T/s
+	echo $1_DEF='$'$1  >> $T/s
+	. $T/s
+}
+
+initparam LKMM_DESTDIR "."
+initparam LKMM_HERD_OPTIONS "-conf linux-kernel.cfg"
+initparam LKMM_JOBS `getconf _NPROCESSORS_ONLN`
+initparam LKMM_PROCS "3"
+initparam LKMM_TIMEOUT "1m"
+
+scriptname=$0
+
+usagehelp () {
+	echo "Usage $scriptname [ arguments ]"
+	echo "      --destdir path (place for .litmus.out, default by .litmus)"
+	echo "      --herdopts -conf linux-kernel.cfg ..."
+	echo "      --jobs N (number of jobs, default one per CPU)"
+	echo "      --procs N (litmus tests with at most this many processes)"
+	echo "      --timeout N (herd7 timeout (e.g., 10s, 1m, 2hr, 1d, '')"
+	echo "Defaults: --destdir '$LKMM_DESTDIR_DEF' --herdopts '$LKMM_HERD_OPTIONS_DEF' --jobs '$LKMM_JOBS_DEF' --procs '$LKMM_PROCS_DEF' --timeout '$LKMM_TIMEOUT_DEF'"
+	exit 1
+}
+
+usage () {
+	usagehelp 1>&2
+}
+
+# checkarg --argname argtype $# arg mustmatch cannotmatch
+checkarg () {
+	if test $3 -le 1
+	then
+		echo $1 needs argument $2 matching \"$5\"
+		usage
+	fi
+	if echo "$4" | grep -q -e "$5"
+	then
+		:
+	else
+		echo $1 $2 \"$4\" must match \"$5\"
+		usage
+	fi
+	if echo "$4" | grep -q -e "$6"
+	then
+		echo $1 $2 \"$4\" must not match \"$6\"
+		usage
+	fi
+}
+
+while test $# -gt 0
+do
+	case "$1" in
+	--destdir)
+		checkarg --destdir "(path to directory)" "$#" "$2" '.\+' '^--'
+		LKMM_DESTDIR="$2"
+		mkdir $LKMM_DESTDIR > /dev/null 2>&1
+		if ! test -e "$LKMM_DESTDIR"
+		then
+			echo "Cannot create directory --destdir '$LKMM_DESTDIR'"
+			usage
+		fi
+		if test -d "$LKMM_DESTDIR" -a -w "$LKMM_DESTDIR" -a -x "$LKMM_DESTDIR"
+		then
+			:
+		else
+			echo "Directory --destdir '$LKMM_DESTDIR' insufficient permissions to create files"
+			usage
+		fi
+		shift
+		;;
+	--herdopts|--herdopt)
+		checkarg --destdir "(herd options)" "$#" "$2" '.*' '^--'
+		LKMM_HERD_OPTIONS="$2"
+		shift
+		;;
+	--jobs|--job)
+		checkarg --jobs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+		LKMM_JOBS="$2"
+		shift
+		;;
+	--procs|--proc)
+		checkarg --procs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+		LKMM_PROCS="$2"
+		shift
+		;;
+	--timeout)
+		checkarg --timeout "(timeout spec)" "$#" "$2" '^\([0-9]\+[smhd]\?\|\)$' '^--'
+		LKMM_TIMEOUT="$2"
+		shift
+		;;
+	*)
+		echo Unknown argument $1
+		usage
+		;;
+	esac
+	shift
+done
+if test -z "$LKMM_TIMEOUT"
+then
+	LKMM_TIMEOUT_CMD=""; export LKMM_TIMEOUT_CMD
+else
+	LKMM_TIMEOUT_CMD="timeout $LKMM_TIMEOUT"; export LKMM_TIMEOUT_CMD
+fi
+rm -rf $T
diff --git a/tools/memory-model/scripts/runlitmushist.sh b/tools/memory-model/scripts/runlitmushist.sh
new file mode 100644
index 000000000000..e507f5f933d5
--- /dev/null
+++ b/tools/memory-model/scripts/runlitmushist.sh
@@ -0,0 +1,87 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Runs the C-language litmus tests specified on standard input, using up
+# to the specified number of CPUs (defaulting to all of them) and placing
+# the results in the specified directory (defaulting to the same place
+# the litmus test came from).
+#
+# sh runlitmushist.sh
+#
+# Run from the Linux kernel tools/memory-model directory.
+# This script uses environment variables produced by parseargs.sh.
+#
+# Copyright IBM Corporation, 2018
+#
+# Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/runlitmushist.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+if test -d litmus
+then
+	:
+else
+	echo Directory \"litmus\" missing, aborting run.
+	exit 1
+fi
+
+# Prefixes for per-CPU scripts
+for ((i=0;i<$LKMM_JOBS;i++))
+do
+	echo dir="$LKMM_DESTDIR" > $T/$i.sh
+	echo T=$T >> $T/$i.sh
+	echo herdoptions=\"$LKMM_HERD_OPTIONS\" >> $T/$i.sh
+	cat << '___EOF___' >> $T/$i.sh
+	runtest () {
+		echo ' ... ' /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 '>' $dir/$1.out '2>&1'
+		if /usr/bin/time $LKMM_TIMEOUT_CMD herd7 $herdoptions $1 > $dir/$1.out 2>&1
+		then
+			if ! grep -q '^Observation ' $dir/$1.out
+			then
+				echo ' !!! Herd failed, no Observation:' $1
+			fi
+		else
+			exitcode=$?
+			if test "$exitcode" -eq 124
+			then
+				exitmsg="timed out"
+			else
+				exitmsg="failed, exit code $exitcode"
+			fi
+			echo ' !!! Herd' ${exitmsg}: $1
+		fi
+	}
+___EOF___
+done
+
+awk -v q="'" -v b='\\' '
+{
+	print "echo `grep " q "^P[0-9]" b "+(" q " " $0 " | tail -1 | sed -e " q "s/^P" b "([0-9]" b "+" b ")(.*$/" b "1/" q "` " $0
+}' | bash |
+sort -k1n |
+awk -v ncpu=$LKMM_JOBS -v t=$T '
+{
+	print "runtest " $2 >> t "/" NR % ncpu ".sh";
+}
+
+END {
+	for (i = 0; i < ncpu; i++) {
+		print "sh " t "/" i ".sh > " t "/" i ".sh.out 2>&1 &";
+		close(t "/" i ".sh");
+	}
+	print "wait";
+}' | sh
+cat $T/*.sh.out
+if grep -q '!!!' $T/*.sh.out
+then
+	echo ' ---' Summary: 1>&2
+	grep '!!!' $T/*.sh.out 1>&2
+	nfail="`grep '!!!' $T/*.sh.out | wc -l`"
+	echo 'Number of failed herd runs (e.g., timeout): ' $nfail 1>&2
+	exit 1
+else
+	echo All runs completed successfully. 1>&2
+	exit 0
+fi

[PATCH memory-model 3/3] EXP tools/memory-model: Make scripts take "-j" abbreviation for "--jobs"

[Paul E. McKenney]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

The "--jobs" argument to the litmus-test scripts is similar to the "-jN"
argument to "make", so this commit allows the "-jN" form as well.  While
in the area, it also prohibits the various forms of "-j0".

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 tools/memory-model/scripts/parseargs.sh | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
index 96b307c8d64a..859e1d581e05 100755
--- a/tools/memory-model/scripts/parseargs.sh
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -95,8 +95,18 @@ do
 		LKMM_HERD_OPTIONS="$2"
 		shift
 		;;
-	--jobs|--job)
-		checkarg --jobs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+	-j[1-9]*)
+		njobs="`echo $1 | sed -e 's/^-j//'`"
+		trailchars="`echo $njobs | sed -e 's/[0-9]\+\(.*\)$/\1/'`"
+		if test -n "$trailchars"
+		then
+			echo $1 trailing characters "'$trailchars'"
+			usagehelp
+		fi
+		LKMM_JOBS="`echo $njobs | sed -e 's/^\([0-9]\+\).*$/\1/'`"
+		;;
+	--jobs|--job|-j)
+		checkarg --jobs "(number)" "$#" "$2" '^[1-9][0-9]\+$' '^--'
 		LKMM_JOBS="$2"
 		shift
 		;;
-- 
2.17.1

[tip:locking/core] tools/memory-model: Make scripts take "-j" abbreviation for "--jobs"

[tip-bot for Paul E. McKenney]

Commit-ID:  a6f1de04276d036b61c4d1dbd0367e6b430d8783
Gitweb:     https://git.kernel.org/tip/a6f1de04276d036b61c4d1dbd0367e6b430d8783
Author:     Paul E. McKenney <paulmck@linux.vnet.ibm.com>
AuthorDate: Mon, 3 Dec 2018 15:04:51 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Tue, 4 Dec 2018 07:29:52 +0100

tools/memory-model: Make scripts take "-j" abbreviation for "--jobs"

The "--jobs" argument to the litmus-test scripts is similar to the "-jN"
argument to "make", so this commit allows the "-jN" form as well.  While
in the area, it also prohibits the various forms of "-j0".

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20181203230451.28921-3-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 tools/memory-model/scripts/parseargs.sh | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
index 96b307c8d64a..859e1d581e05 100644
--- a/tools/memory-model/scripts/parseargs.sh
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -95,8 +95,18 @@ do
 		LKMM_HERD_OPTIONS="$2"
 		shift
 		;;
-	--jobs|--job)
-		checkarg --jobs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+	-j[1-9]*)
+		njobs="`echo $1 | sed -e 's/^-j//'`"
+		trailchars="`echo $njobs | sed -e 's/[0-9]\+\(.*\)$/\1/'`"
+		if test -n "$trailchars"
+		then
+			echo $1 trailing characters "'$trailchars'"
+			usagehelp
+		fi
+		LKMM_JOBS="`echo $njobs | sed -e 's/^\([0-9]\+\).*$/\1/'`"
+		;;
+	--jobs|--job|-j)
+		checkarg --jobs "(number)" "$#" "$2" '^[1-9][0-9]\+$' '^--'
 		LKMM_JOBS="$2"
 		shift
 		;;

[tip:locking/core] tools/memory-model: Make scripts take "-j" abbreviation for "--jobs"

[tip-bot for Paul E. McKenney]

Commit-ID:  910cc9591d1433c2e26bd1c210844b09c699dd89
Gitweb:     https://git.kernel.org/tip/910cc9591d1433c2e26bd1c210844b09c699dd89
Author:     Paul E. McKenney <paulmck@linux.vnet.ibm.com>
AuthorDate: Mon, 3 Dec 2018 15:04:51 -0800
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Mon, 21 Jan 2019 11:07:04 +0100

tools/memory-model: Make scripts take "-j" abbreviation for "--jobs"

The "--jobs" argument to the litmus-test scripts is similar to the "-jN"
argument to "make", so this commit allows the "-jN" form as well.  While
in the area, it also prohibits the various forms of "-j0".

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20181203230451.28921-3-paulmck@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 tools/memory-model/scripts/parseargs.sh | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/tools/memory-model/scripts/parseargs.sh b/tools/memory-model/scripts/parseargs.sh
index 96b307c8d64a..859e1d581e05 100644
--- a/tools/memory-model/scripts/parseargs.sh
+++ b/tools/memory-model/scripts/parseargs.sh
@@ -95,8 +95,18 @@ do
 		LKMM_HERD_OPTIONS="$2"
 		shift
 		;;
-	--jobs|--job)
-		checkarg --jobs "(number)" "$#" "$2" '^[0-9]\+$' '^--'
+	-j[1-9]*)
+		njobs="`echo $1 | sed -e 's/^-j//'`"
+		trailchars="`echo $njobs | sed -e 's/[0-9]\+\(.*\)$/\1/'`"
+		if test -n "$trailchars"
+		then
+			echo $1 trailing characters "'$trailchars'"
+			usagehelp
+		fi
+		LKMM_JOBS="`echo $njobs | sed -e 's/^\([0-9]\+\).*$/\1/'`"
+		;;
+	--jobs|--job|-j)
+		checkarg --jobs "(number)" "$#" "$2" '^[1-9][0-9]\+$' '^--'
 		LKMM_JOBS="$2"
 		shift
 		;;

Re: [PATCH memory-model 0/3] Updates to the formal memory model

[Akira Yokosawa]

On 2018/12/03 15:04:11 -0800, Paul E. McKenney wrote:
> Hello, Ingo!
> 
> This series contains updates to the Linux kernel's formal memory model
> in tools/memory-model.  These patches are ready for inclusion into -tip.
> 
> 1.	Model smp_mb__after_unlock_lock(), courtesy of Andrea Parri.
> 
> 2.	Add scripts to check github litmus tests.
> 
> 3.	Make scripts take "-j" abbreviation for "--jobs".
> 
> There is another series in preparation to model SRCU, but this series
> requires hot-off-the presses changes to the herd tool that have not yet
> been released.  This SRCU series is therefore targeting the merge window
> after the upcoming one.  People wishing to experiment with the prototype
> SRCU model may obtain it from my -rcu tree at branch "dev", and use
> a bleeding-edge herd7 built from https://github.com/herd/herdtools7/,
> version 7.51+2(dev), which is (commit 10403b24070c) or later.

On the master branch of herdtools7, SRCU support was added in version
7.51+4(dev), which is commit 6ec9da1f4d58, or later.

        Thanks, Akira

> 
> 							Thanx, Paul
> 
> ------------------------------------------------------------------------
> 
>  .gitignore                 |    1 
>  README                     |    2 
>  linux-kernel.bell          |    3 
>  linux-kernel.cat           |    4 -
>  linux-kernel.def           |    1 
>  scripts/README             |   70 ++++++++++++++++++++++
>  scripts/checkalllitmus.sh  |   53 +++++++----------
>  scripts/checkghlitmus.sh   |   65 ++++++++++++++++++++
>  scripts/checklitmus.sh     |   74 +++--------------------
>  scripts/checklitmushist.sh |   60 +++++++++++++++++++
>  scripts/cmplitmushist.sh   |   87 +++++++++++++++++++++++++++
>  scripts/initlitmushist.sh  |   68 +++++++++++++++++++++
>  scripts/judgelitmus.sh     |   78 +++++++++++++++++++++++++
>  scripts/newlitmushist.sh   |   61 +++++++++++++++++++
>  scripts/parseargs.sh       |  140 ++++++++++++++++++++++++++++++++++++++++++++-
>  scripts/runlitmushist.sh   |   87 +++++++++++++++++++++++++++
>  16 files changed, 757 insertions(+), 97 deletions(-)
> 

Re: [PATCH memory-model 0/3] Updates to the formal memory model

[Paul E. McKenney]

On Tue, Dec 04, 2018 at 08:28:03AM +0900, Akira Yokosawa wrote:
> On 2018/12/03 15:04:11 -0800, Paul E. McKenney wrote:
> > Hello, Ingo!
> > 
> > This series contains updates to the Linux kernel's formal memory model
> > in tools/memory-model.  These patches are ready for inclusion into -tip.
> > 
> > 1.	Model smp_mb__after_unlock_lock(), courtesy of Andrea Parri.
> > 
> > 2.	Add scripts to check github litmus tests.
> > 
> > 3.	Make scripts take "-j" abbreviation for "--jobs".
> > 
> > There is another series in preparation to model SRCU, but this series
> > requires hot-off-the presses changes to the herd tool that have not yet
> > been released.  This SRCU series is therefore targeting the merge window
> > after the upcoming one.  People wishing to experiment with the prototype
> > SRCU model may obtain it from my -rcu tree at branch "dev", and use
> > a bleeding-edge herd7 built from https://github.com/herd/herdtools7/,
> > version 7.51+2(dev), which is (commit 10403b24070c) or later.
> 
> On the master branch of herdtools7, SRCU support was added in version
> 7.51+4(dev), which is commit 6ec9da1f4d58, or later.

It has been working for me with version 7.51+2(dev), but perhaps I
have just been getting lucky.  It wouldn't be the first time!  ;-)

							Thanx, Paul

>         Thanks, Akira
> 
> > 
> > 							Thanx, Paul
> > 
> > ------------------------------------------------------------------------
> > 
> >  .gitignore                 |    1 
> >  README                     |    2 
> >  linux-kernel.bell          |    3 
> >  linux-kernel.cat           |    4 -
> >  linux-kernel.def           |    1 
> >  scripts/README             |   70 ++++++++++++++++++++++
> >  scripts/checkalllitmus.sh  |   53 +++++++----------
> >  scripts/checkghlitmus.sh   |   65 ++++++++++++++++++++
> >  scripts/checklitmus.sh     |   74 +++--------------------
> >  scripts/checklitmushist.sh |   60 +++++++++++++++++++
> >  scripts/cmplitmushist.sh   |   87 +++++++++++++++++++++++++++
> >  scripts/initlitmushist.sh  |   68 +++++++++++++++++++++
> >  scripts/judgelitmus.sh     |   78 +++++++++++++++++++++++++
> >  scripts/newlitmushist.sh   |   61 +++++++++++++++++++
> >  scripts/parseargs.sh       |  140 ++++++++++++++++++++++++++++++++++++++++++++-
> >  scripts/runlitmushist.sh   |   87 +++++++++++++++++++++++++++
> >  16 files changed, 757 insertions(+), 97 deletions(-)
> > 
> 

Re: [PATCH memory-model 0/3] Updates to the formal memory model

[Akira Yokosawa]

On 2018/12/03 15:51:27 -0800, Paul E. McKenney wrote:
> On Tue, Dec 04, 2018 at 08:28:03AM +0900, Akira Yokosawa wrote:
>> On 2018/12/03 15:04:11 -0800, Paul E. McKenney wrote:
>>> Hello, Ingo!
>>>
>>> This series contains updates to the Linux kernel's formal memory model
>>> in tools/memory-model.  These patches are ready for inclusion into -tip.
>>>
>>> 1.	Model smp_mb__after_unlock_lock(), courtesy of Andrea Parri.
>>>
>>> 2.	Add scripts to check github litmus tests.
>>>
>>> 3.	Make scripts take "-j" abbreviation for "--jobs".
>>>
>>> There is another series in preparation to model SRCU, but this series
>>> requires hot-off-the presses changes to the herd tool that have not yet
>>> been released.  This SRCU series is therefore targeting the merge window
>>> after the upcoming one.  People wishing to experiment with the prototype
>>> SRCU model may obtain it from my -rcu tree at branch "dev", and use
>>> a bleeding-edge herd7 built from https://github.com/herd/herdtools7/,
>>> version 7.51+2(dev), which is (commit 10403b24070c) or later.
>>
>> On the master branch of herdtools7, SRCU support was added in version
>> 7.51+4(dev), which is commit 6ec9da1f4d58, or later.
> 
> It has been working for me with version 7.51+2(dev), but perhaps I
> have just been getting lucky.  It wouldn't be the first time!  ;-)

Sounds like you've been at the HEAD of topic branch "srcu".

        Thanks, Akira
> 
> 							Thanx, Paul
> 
>>         Thanks, Akira
>>
>>>
>>> 							Thanx, Paul
>>>
>>> ------------------------------------------------------------------------
>>>
>>>  .gitignore                 |    1 
>>>  README                     |    2 
>>>  linux-kernel.bell          |    3 
>>>  linux-kernel.cat           |    4 -
>>>  linux-kernel.def           |    1 
>>>  scripts/README             |   70 ++++++++++++++++++++++
>>>  scripts/checkalllitmus.sh  |   53 +++++++----------
>>>  scripts/checkghlitmus.sh   |   65 ++++++++++++++++++++
>>>  scripts/checklitmus.sh     |   74 +++--------------------
>>>  scripts/checklitmushist.sh |   60 +++++++++++++++++++
>>>  scripts/cmplitmushist.sh   |   87 +++++++++++++++++++++++++++
>>>  scripts/initlitmushist.sh  |   68 +++++++++++++++++++++
>>>  scripts/judgelitmus.sh     |   78 +++++++++++++++++++++++++
>>>  scripts/newlitmushist.sh   |   61 +++++++++++++++++++
>>>  scripts/parseargs.sh       |  140 ++++++++++++++++++++++++++++++++++++++++++++-
>>>  scripts/runlitmushist.sh   |   87 +++++++++++++++++++++++++++
>>>  16 files changed, 757 insertions(+), 97 deletions(-)
>>>
>>
> 

Re: [PATCH memory-model 0/3] Updates to the formal memory model

[Paul E. McKenney]

On Wed, Dec 05, 2018 at 12:40:01AM +0900, Akira Yokosawa wrote:
> On 2018/12/03 15:51:27 -0800, Paul E. McKenney wrote:
> > On Tue, Dec 04, 2018 at 08:28:03AM +0900, Akira Yokosawa wrote:
> >> On 2018/12/03 15:04:11 -0800, Paul E. McKenney wrote:
> >>> Hello, Ingo!
> >>>
> >>> This series contains updates to the Linux kernel's formal memory model
> >>> in tools/memory-model.  These patches are ready for inclusion into -tip.
> >>>
> >>> 1.	Model smp_mb__after_unlock_lock(), courtesy of Andrea Parri.
> >>>
> >>> 2.	Add scripts to check github litmus tests.
> >>>
> >>> 3.	Make scripts take "-j" abbreviation for "--jobs".
> >>>
> >>> There is another series in preparation to model SRCU, but this series
> >>> requires hot-off-the presses changes to the herd tool that have not yet
> >>> been released.  This SRCU series is therefore targeting the merge window
> >>> after the upcoming one.  People wishing to experiment with the prototype
> >>> SRCU model may obtain it from my -rcu tree at branch "dev", and use
> >>> a bleeding-edge herd7 built from https://github.com/herd/herdtools7/,
> >>> version 7.51+2(dev), which is (commit 10403b24070c) or later.
> >>
> >> On the master branch of herdtools7, SRCU support was added in version
> >> 7.51+4(dev), which is commit 6ec9da1f4d58, or later.
> > 
> > It has been working for me with version 7.51+2(dev), but perhaps I
> > have just been getting lucky.  It wouldn't be the first time!  ;-)
> 
> Sounds like you've been at the HEAD of topic branch "srcu".

You are quite right.  And this situation does confirm the wisdom of
waiting until a herd release containing the SRCU support.  ;-)

							Thanx, Paul

>         Thanks, Akira
> > 
> > 							Thanx, Paul
> > 
> >>         Thanks, Akira
> >>
> >>>
> >>> 							Thanx, Paul
> >>>
> >>> ------------------------------------------------------------------------
> >>>
> >>>  .gitignore                 |    1 
> >>>  README                     |    2 
> >>>  linux-kernel.bell          |    3 
> >>>  linux-kernel.cat           |    4 -
> >>>  linux-kernel.def           |    1 
> >>>  scripts/README             |   70 ++++++++++++++++++++++
> >>>  scripts/checkalllitmus.sh  |   53 +++++++----------
> >>>  scripts/checkghlitmus.sh   |   65 ++++++++++++++++++++
> >>>  scripts/checklitmus.sh     |   74 +++--------------------
> >>>  scripts/checklitmushist.sh |   60 +++++++++++++++++++
> >>>  scripts/cmplitmushist.sh   |   87 +++++++++++++++++++++++++++
> >>>  scripts/initlitmushist.sh  |   68 +++++++++++++++++++++
> >>>  scripts/judgelitmus.sh     |   78 +++++++++++++++++++++++++
> >>>  scripts/newlitmushist.sh   |   61 +++++++++++++++++++
> >>>  scripts/parseargs.sh       |  140 ++++++++++++++++++++++++++++++++++++++++++++-
> >>>  scripts/runlitmushist.sh   |   87 +++++++++++++++++++++++++++
> >>>  16 files changed, 757 insertions(+), 97 deletions(-)
> >>>
> >>
> > 
>