* [GIT PULL] TTY/Serial patches for 4.21-rc1
@ 2018-12-28 15:35 Greg KH
2018-12-29 5:35 ` pr-tracker-bot
0 siblings, 1 reply; 2+ messages in thread
From: Greg KH @ 2018-12-28 15:35 UTC (permalink / raw)
To: Linus Torvalds
Cc: Jiri Slaby, Stephen Rothwell, Andrew Morton, linux-kernel, linux-serial
The following changes since commit 40e020c129cfc991e8ab4736d2665351ffd1468d:
Linux 4.20-rc6 (2018-12-09 15:31:00 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-4.21-rc1
for you to fetch changes up to 598134ffcab5bfb1d342458732394487063e1b9e:
Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250" (2018-12-24 09:18:00 +0100)
----------------------------------------------------------------
TTY/Serial driver patches for 4.21-rc1
Here is the large TTY/Serial driver set of patches for 4.21-rc1.
A number of small serial driver changes along with some good tty core
fixes for long-reported issues with locking. There is also a new
console font added to the tree, for high-res screens, so that should be
helpful for many.
The last patch in the series is a revert of an older one in the tree, it
came late but it resolves a reported issue that linux-next was having
for some people.
Full details are in the shortlog, and all of these, with the exception
of the revert, have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Aisheng Dong (1):
dt-bindings: serial: lpuart: add imx8qxp compatible string
Alexander Shiyan (3):
serial: max310x: Fix tx_empty() callback
serial: sccnxp: Adds a delay between sequential read/write cycles
serial: sccnxp: Allow to use non-standard baud rates
Amanoel Dawod (1):
Fonts: New Terminus large console font
Anders Roxell (2):
serial: set suppress_bind_attrs flag only if builtin
writeback: don't decrement wb->refcnt if !wb->bdi
Andy Duan (2):
serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
serial: fsl_lpuart: clear parity enable bit when disable parity
Beomho Seo (1):
tty: serial: samsung: Properly set flags in autoCTS mode
Colin Ian King (1):
serial-uartlite: fix null pointer dereference on pointer port
Darwin Dingel (2):
dt-bindings: serial: 8250: Add rate limit for serial port input overruns
serial: 8250: Rate limit serial port rx interrupts during input overruns
Dmitry Safonov (6):
tty/ldsem: Wake up readers after timed out down_write()
tty: Hold tty_ldisc_lock() during tty_reopen()
tty: Don't block on IO when ldisc change is pending
tty: Simplify tty->count math in tty_reopen()
tty/ldsem: Add lockdep asserts for ldisc_sem
tty/ldsem: Decrement wait_readers on timeouted down_read()
Douglas Anderson (6):
tty: serial: qcom_geni_serial: Don't slow all ports just for kgdb
serial: qcom_geni_serial: Finish supporting sysrq
serial: core: Allow processing sysrq at port unlock time
serial: qcom_geni_serial: Process sysrq at port unlock time
serial: core: Include console.h from serial_core.h
serial: 8250: Process sysrq at port unlock time
Fabrizio Castro (2):
dt-bindings: serial: sh-sci: Document r8a774a1 bindings
dt-bindings: serial: sh-sci: Document r8a774c0 bindings
Florian Fainelli (1):
serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250
Geert Uytterhoeven (4):
serial: sh-sci: Improve type-safety calling sci_receive_chars()
serial: sh-sci: Fix locking in sci_submit_rx()
serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
Greg Kroah-Hartman (7):
Merge 4.20-rc2 into tty-next
Merge 4.20-rc4 into tty-next
Revert "serial/sunsu: add missing of_node_put()"
Revert "tty: xilinx_uartps: Correct return value in probe"
Revert "sysctl: clean up nr_pdflush_threads leftover"
Merge 4.20-rc6 into tty-next
Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250"
Johan Hovold (4):
serdev: use zero to indicate infinite write timeout
serdev: make synchronous write return bytes written
serdev: make synchronous write helper interruptible
serdev: document the write functions using kernel-doc
Long Cheng (2):
dt-bindings: dma: uart: add uart dma bindings
serial: 8250-mtk: add uart DMA support
Marcel Ziswiler (1):
serial: tegra: fix some spelling mistakes
Mark Tomlinson (1):
tty/sysrq: Do not call sync directly from sysrq_do_reset()
Matthias Kaehlcke (2):
sysrq: Use panic() to force a crash
tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
Michal Simek (1):
serial: uartps: Fix error path when alloc failed
Miquel Raynal (2):
serial: mvebu-uart: clarify the baud rate derivation
serial: mvebu-uart: initialize over sampling stack register
Mukesh Kumar Savaliya (1):
tty: serial: qcom_geni_serial: Rectify UART suspend mechanism
Nava kishore Manne (1):
serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly
Peter Korsgaard (1):
ttyprintk: make the printk log level configurable
Peter Zijlstra (1):
tty/ldsem: Convert to regular lockdep annotations
Rafael Aquini (1):
sysctl: clean up nr_pdflush_threads leftover
Rajan Vaja (1):
tty: xilinx_uartps: Correct return value in probe
Rob Herring (1):
tty: Use of_node_name_{eq,prefix} for node name comparisons
Ryan Case (3):
tty: serial: qcom_geni_serial: Fix softlock
tty: serial: qcom_geni_serial: Remove interrupt storm
tty: serial: qcom_geni_serial: Fix UART hang
Sergey Senozhatsky (1):
tty/serial: do not free trasnmit buffer page under port lock
Seung-Woo Kim (1):
tty: serial: samsung: Increase maximum baudrate
Shubhrajyoti Datta (7):
serial-uartlite: Move the uart register
serial-uartlite: Add get serial id if not provided
serial-uartlite: Do not use static struct uart_driver out of probe()
serial-uartlite: Add runtime support
serial-uartlite: Fix the unbind path
serial: uartps: Add the device_init_wakeup
serial: uartps: Check if the device is a console
Songjun Wu (11):
serial: lantiq: Get serial id from dts
serial: lantiq: Change ltq_w32_mask to asc_update_bits
serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32
serial: lantiq: Rename fpiclk to freqclk
serial: lantiq: Replace clk_enable/clk_disable with clk generic API
serial: lantiq: Add CCF support
serial: lantiq: Reorder the head files
serial: lantiq: Replace lantiq_soc.h with lantiq.h
serial: lantiq: Change init_lqasc to static declaration
dt-bindings: serial: lantiq: Add optional properties for CCF
include: Add lantiq.h in include/linux/
Stefan Agner (1):
serial: imx: fix error handling in console_setup
Wolfram Sang (1):
tty: serial: qcom_geni_serial: simplify getting .driver_data
Yangtao Li (3):
drivers/tty: add missing of_node_put()
serial/sunsu: add missing of_node_put()
tty/sysrq: add of_node_put()
zhong jiang (1):
pch_uart: remove set but not used variable 'tx_empty'
.../devicetree/bindings/dma/8250_mtk_dma.txt | 33 +
Documentation/devicetree/bindings/serial/8250.txt | 1 +
.../devicetree/bindings/serial/fsl-lpuart.txt | 2 +
.../devicetree/bindings/serial/lantiq_asc.txt | 15 +
.../bindings/serial/renesas,sci-serial.txt | 16 +-
drivers/char/Kconfig | 8 +
drivers/char/ttyprintk.c | 4 +-
drivers/gnss/serial.c | 2 +-
drivers/gnss/sirf.c | 2 +-
drivers/tty/hvc/hvc_opal.c | 2 +-
drivers/tty/hvc/hvc_vio.c | 11 +-
drivers/tty/n_hdlc.c | 4 +-
drivers/tty/n_r3964.c | 2 +-
drivers/tty/n_tty.c | 8 +-
drivers/tty/serdev/core.c | 70 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 6 +-
drivers/tty/serial/8250/8250_core.c | 25 +
drivers/tty/serial/8250/8250_fsl.c | 29 +-
drivers/tty/serial/8250/8250_mtk.c | 210 +-
drivers/tty/serial/8250/8250_of.c | 5 +
drivers/tty/serial/8250/8250_omap.c | 6 +-
drivers/tty/serial/8250/8250_port.c | 8 +-
drivers/tty/serial/amba-pl011.c | 2 +
drivers/tty/serial/fsl_lpuart.c | 6 +-
drivers/tty/serial/imx.c | 2 +-
drivers/tty/serial/lantiq.c | 145 +-
drivers/tty/serial/max310x.c | 7 +-
drivers/tty/serial/mvebu-uart.c | 29 +-
drivers/tty/serial/pch_uart.c | 3 -
drivers/tty/serial/pic32_uart.c | 1 +
drivers/tty/serial/pmac_zilog.c | 4 +-
drivers/tty/serial/qcom_geni_serial.c | 163 +-
drivers/tty/serial/samsung.c | 5 +-
drivers/tty/serial/sccnxp.c | 54 +-
drivers/tty/serial/serial-tegra.c | 10 +-
drivers/tty/serial/serial_core.c | 22 +-
drivers/tty/serial/sh-sci.c | 29 +-
drivers/tty/serial/suncore.c | 8 +-
drivers/tty/serial/sunsu.c | 4 +-
drivers/tty/serial/uartlite.c | 97 +-
drivers/tty/serial/xilinx_uartps.c | 17 +-
drivers/tty/sysrq.c | 18 +-
drivers/tty/tty_io.c | 14 +-
drivers/tty/tty_ldisc.c | 16 +
drivers/tty/tty_ldsem.c | 62 +-
include/linux/backing-dev-defs.h | 8 +
include/linux/font.h | 4 +-
include/linux/lantiq.h | 23 +
include/linux/serdev.h | 2 +-
include/linux/serial_8250.h | 4 +
include/linux/serial_core.h | 38 +-
include/linux/tty.h | 7 +
lib/fonts/Kconfig | 10 +
lib/fonts/Makefile | 1 +
lib/fonts/font_ter16x32.c | 2072 ++++++++++++++++++++
lib/fonts/fonts.c | 4 +
56 files changed, 3047 insertions(+), 313 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
create mode 100644 include/linux/lantiq.h
create mode 100644 lib/fonts/font_ter16x32.c
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] TTY/Serial patches for 4.21-rc1
2018-12-28 15:35 [GIT PULL] TTY/Serial patches for 4.21-rc1 Greg KH
@ 2018-12-29 5:35 ` pr-tracker-bot
0 siblings, 0 replies; 2+ messages in thread
From: pr-tracker-bot @ 2018-12-29 5:35 UTC (permalink / raw)
To: Greg KH
Cc: Linus Torvalds, Jiri Slaby, Stephen Rothwell, Andrew Morton,
linux-kernel, linux-serial
The pull request you sent on Fri, 28 Dec 2018 16:35:06 +0100:
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-4.21-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/117eda8f71ff545cfdec8fe8073adbd173a1ceff
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-12-29 5:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-28 15:35 [GIT PULL] TTY/Serial patches for 4.21-rc1 Greg KH
2018-12-29 5:35 ` pr-tracker-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).