* [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy
@ 2019-01-21 10:25 Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 2/6] usb: phy: Workaround for USB erratum-A005728 Yinbo Zhu
` (5 more replies)
0 siblings, 6 replies; 8+ messages in thread
From: Yinbo Zhu @ 2019-01-21 10:25 UTC (permalink / raw)
To: Alan Stern
Cc: Yinbo Zhu, Xiaobo Xie, Jerry Huang, Ran Wang, Greg Kroah-Hartman,
Ramneek Mehresh, Nikhil Badola, Suresh Gupta, linux-usb,
linux-kernel
From: Nikhil Badola <nikhil.badola@freescale.com>
Set USB_EN bit to select ULPI phy for USB controller version 2.5
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
Change in v2:
replace Yinbo.Zhu with Yinbo Zhu
drivers/usb/host/ehci-fsl.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0a9fd20..71c4661 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -118,6 +118,12 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
CONTROL_REGISTER_W1C_MASK, 0x4);
+ /* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */
+ if (pdata->controller_ver == FSL_USB_VER_2_5 &&
+ pdata->phy_mode == FSL_USB2_PHY_ULPI)
+ iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL);
+
+
/*
* Enable UTMI phy and program PTS field in UTMI mode before asserting
* controller reset for USB Controller version 2.5
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/6] usb: phy: Workaround for USB erratum-A005728
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
@ 2019-01-21 10:25 ` Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 3/6] usb: host: Stops USB controller init if PLL fails to lock Yinbo Zhu
` (4 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Yinbo Zhu @ 2019-01-21 10:25 UTC (permalink / raw)
To: Alan Stern
Cc: Yinbo Zhu, Xiaobo Xie, Jerry Huang, Ran Wang, Greg Kroah-Hartman,
Ramneek Mehresh, Nikhil Badola, Suresh Gupta, linux-usb,
linux-kernel, Suresh Gupta
From: Suresh Gupta <B42813@freescale.com>
PHY_CLK_VALID bit for UTMI PHY in USBDR does not set even
if PHY is providing valid clock. Workaround for this
involves resetting of PHY and check PHY_CLK_VALID bit
multiple times. If PHY_CLK_VALID bit is still not set even
after 5 retries, it would be safe to deaclare that PHY
clock is not available.
This erratum is applicable for USBDR less then ver 2.4.
Signed-off-by: Suresh Gupta <B42813@freescale.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
Change in v2:
replace Yinbo.Zhu with Yinbo Zhu
drivers/usb/host/ehci-fsl.c | 37 ++++++++++++++++++++++++++-----------
drivers/usb/host/ehci-fsl.h | 3 +++
2 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 71c4661..a28ec1e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -176,6 +176,17 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
return retval;
}
+static bool usb_phy_clk_valid(struct usb_hcd *hcd)
+{
+ void __iomem *non_ehci = hcd->regs;
+ bool ret = true;
+
+ if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID))
+ ret = false;
+
+ return ret;
+}
+
static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
enum fsl_usb2_phy_modes phy_mode,
unsigned int port_offset)
@@ -214,6 +225,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
/* fall through */
case FSL_USB2_PHY_UTMI:
case FSL_USB2_PHY_UTMI_DUAL:
+ /* PHY_CLK_VALID bit is de-featured from all controller
+ * versions below 2.4 and is to be checked only for
+ * internal UTMI phy
+ */
+ if (pdata->controller_ver > FSL_USB_VER_2_4 &&
+ pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) {
+ pr_err("fsl-ehci: USB PHY clock invalid\n");
+ return -EINVAL;
+ }
+
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
@@ -232,17 +253,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
break;
}
- /*
- * check PHY_CLK_VALID to determine phy clock presence before writing
- * to portsc
- */
- if (pdata->check_phy_clk_valid) {
- if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) &
- PHY_CLK_VALID)) {
- dev_warn(hcd->self.controller,
- "USB PHY clock invalid\n");
- return -EINVAL;
- }
+ if (pdata->have_sysif_regs &&
+ pdata->controller_ver > FSL_USB_VER_1_6 &&
+ !usb_phy_clk_valid(hcd)) {
+ dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
+ return -EINVAL;
}
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index cbc4220..9d18c6e 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -50,4 +50,7 @@
#define UTMI_PHY_EN (1<<9)
#define ULPI_PHY_CLK_SEL (1<<10)
#define PHY_CLK_VALID (1<<17)
+
+/* Retry count for checking UTMI PHY CLK validity */
+#define UTMI_PHY_CLK_VALID_CHK_RETRY 5
#endif /* _EHCI_FSL_H */
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 2/6] usb: phy: Workaround for USB erratum-A005728 Yinbo Zhu
@ 2019-01-21 10:25 ` Yinbo Zhu
2019-01-22 8:04 ` Greg Kroah-Hartman
2019-01-21 10:25 ` [PATCH v2 4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 Yinbo Zhu
` (3 subsequent siblings)
5 siblings, 1 reply; 8+ messages in thread
From: Yinbo Zhu @ 2019-01-21 10:25 UTC (permalink / raw)
To: Alan Stern
Cc: Yinbo Zhu, Xiaobo Xie, Jerry Huang, Ran Wang, Greg Kroah-Hartman,
Ramneek Mehresh, Nikhil Badola, Suresh Gupta, linux-usb,
linux-kernel
From: yinbo.zhu <yinbo.zhu@nxp.com>
USB erratum-A006918 workaround tries to start internal PHY inside
uboot (when PLL fails to lock). However, if the workaround also
fails, then USB initialization is also stopped inside Linux.
Erratum-A006918 workaround failure creates "fsl,erratum_a006918"
node in device-tree. Presence of this node in device-tree is
used to stop USB controller initialization in Linux
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
Change in v2:
replace Yinbo.Zhu with Yinbo Zhu
drivers/usb/host/ehci-fsl.c | 5 +++++
drivers/usb/host/fsl-mph-dr-of.c | 5 +++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index a28ec1e..6884130 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -224,6 +224,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
+ if (pdata->has_fsl_erratum_a006918) {
+ pr_warn("fsl-ehci: USB PHY clock invalid\n");
+ return -EINVAL;
+ }
+
case FSL_USB2_PHY_UTMI_DUAL:
/* PHY_CLK_VALID bit is de-featured from all controller
* versions below 2.4 and is to be checked only for
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 677f9d5..7e07701 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -225,6 +225,11 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
pdata->has_fsl_erratum_a005697 =
of_property_read_bool(np, "fsl,usb_erratum-a005697");
+ if (of_get_property(np, "fsl,erratum_a006918", NULL))
+ pdata->has_fsl_erratum_a006918 = 1;
+ else
+ pdata->has_fsl_erratum_a006918 = 0;
+
/*
* Determine whether phy_clk_valid needs to be checked
* by reading property in device tree
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 2/6] usb: phy: Workaround for USB erratum-A005728 Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 3/6] usb: host: Stops USB controller init if PLL fails to lock Yinbo Zhu
@ 2019-01-21 10:25 ` Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14 Yinbo Zhu
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Yinbo Zhu @ 2019-01-21 10:25 UTC (permalink / raw)
To: Alan Stern
Cc: Yinbo Zhu, Xiaobo Xie, Jerry Huang, Ran Wang, Greg Kroah-Hartman,
Ramneek Mehresh, Nikhil Badola, Suresh Gupta, linux-usb,
linux-kernel
From: Yinbo Zhu <yinbo.zhu@nxp.com>
This patch is to add member has_fsl_erratum_a006918 in platform data
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
include/linux/fsl_devices.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 60cef82..7ea53c8 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -101,6 +101,7 @@ struct fsl_usb2_platform_data {
unsigned has_fsl_erratum_a007792:1;
unsigned has_fsl_erratum_a005275:1;
unsigned has_fsl_erratum_a005697:1;
+ unsigned has_fsl_erratum_a006918:1;
unsigned check_phy_clk_valid:1;
/* register save area for suspend/resume */
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
` (2 preceding siblings ...)
2019-01-21 10:25 ` [PATCH v2 4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 Yinbo Zhu
@ 2019-01-21 10:25 ` Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 6/6] usb :fsl: Change string format for errata property Yinbo Zhu
2019-01-22 8:08 ` [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Greg Kroah-Hartman
5 siblings, 0 replies; 8+ messages in thread
From: Yinbo Zhu @ 2019-01-21 10:25 UTC (permalink / raw)
To: Alan Stern
Cc: Yinbo Zhu, Xiaobo Xie, Jerry Huang, Ran Wang, Greg Kroah-Hartman,
Ramneek Mehresh, Nikhil Badola, Suresh Gupta, linux-usb,
linux-kernel
From: Yinbo Zhu <yinbo.zhu@nxp.com>
This patch is to add member has_fsl_erratum_14 in platform data
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
include/linux/fsl_devices.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 7ea53c8..5c21a3a 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -102,6 +102,7 @@ struct fsl_usb2_platform_data {
unsigned has_fsl_erratum_a005275:1;
unsigned has_fsl_erratum_a005697:1;
unsigned has_fsl_erratum_a006918:1;
+ unsigned has_fsl_erratum_14:1;
unsigned check_phy_clk_valid:1;
/* register save area for suspend/resume */
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 6/6] usb :fsl: Change string format for errata property
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
` (3 preceding siblings ...)
2019-01-21 10:25 ` [PATCH v2 5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14 Yinbo Zhu
@ 2019-01-21 10:25 ` Yinbo Zhu
2019-01-22 8:08 ` [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Greg Kroah-Hartman
5 siblings, 0 replies; 8+ messages in thread
From: Yinbo Zhu @ 2019-01-21 10:25 UTC (permalink / raw)
To: Alan Stern
Cc: Yinbo Zhu, Xiaobo Xie, Jerry Huang, Ran Wang, Greg Kroah-Hartman,
Ramneek Mehresh, Nikhil Badola, Suresh Gupta, linux-usb,
linux-kernel
From: Nikhil Badola <nikhil.badola@freescale.com>
Remove USB errata checking code from driver. Applicability of erratum
is retrieved by reading corresponding property in device tree.
This property is written during device tree fixup.
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
drivers/usb/host/ehci-fsl.c | 7 +------
drivers/usb/host/fsl-mph-dr-of.c | 9 ++++-----
2 files changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6884130..c71680e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -310,14 +310,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
return -EINVAL;
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
- unsigned int chip, rev, svr;
-
- svr = mfspr(SPRN_SVR);
- chip = svr >> 16;
- rev = (svr >> 4) & 0xf;
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
- if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
+ if (pdata->has_fsl_erratum_14 == 1)
ehci->has_fsl_port_bug = 1;
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 7e07701..ae8f60f 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -224,11 +224,10 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
of_property_read_bool(np, "fsl,usb-erratum-a005275");
pdata->has_fsl_erratum_a005697 =
of_property_read_bool(np, "fsl,usb_erratum-a005697");
-
- if (of_get_property(np, "fsl,erratum_a006918", NULL))
- pdata->has_fsl_erratum_a006918 = 1;
- else
- pdata->has_fsl_erratum_a006918 = 0;
+ pdata->has_fsl_erratum_a006918 =
+ of_property_read_bool(np, "fsl,usb_erratum-a006918");
+ pdata->has_fsl_erratum_14 =
+ of_property_read_bool(np, "fsl,usb_erratum-14");
/*
* Determine whether phy_clk_valid needs to be checked
--
1.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 3/6] usb: host: Stops USB controller init if PLL fails to lock
2019-01-21 10:25 ` [PATCH v2 3/6] usb: host: Stops USB controller init if PLL fails to lock Yinbo Zhu
@ 2019-01-22 8:04 ` Greg Kroah-Hartman
0 siblings, 0 replies; 8+ messages in thread
From: Greg Kroah-Hartman @ 2019-01-22 8:04 UTC (permalink / raw)
To: Yinbo Zhu
Cc: Alan Stern, Xiaobo Xie, Jerry Huang, Ran Wang, Ramneek Mehresh,
Nikhil Badola, Suresh Gupta, linux-usb, linux-kernel
On Mon, Jan 21, 2019 at 10:25:10AM +0000, Yinbo Zhu wrote:
> From: yinbo.zhu <yinbo.zhu@nxp.com>
This line is still wrong :(
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
` (4 preceding siblings ...)
2019-01-21 10:25 ` [PATCH v2 6/6] usb :fsl: Change string format for errata property Yinbo Zhu
@ 2019-01-22 8:08 ` Greg Kroah-Hartman
5 siblings, 0 replies; 8+ messages in thread
From: Greg Kroah-Hartman @ 2019-01-22 8:08 UTC (permalink / raw)
To: Yinbo Zhu
Cc: Alan Stern, Xiaobo Xie, Jerry Huang, Ran Wang, Ramneek Mehresh,
Nikhil Badola, Suresh Gupta, linux-usb, linux-kernel
On Mon, Jan 21, 2019 at 10:25:00AM +0000, Yinbo Zhu wrote:
> From: Nikhil Badola <nikhil.badola@freescale.com>
>
> Set USB_EN bit to select ULPI phy for USB controller version 2.5
>
> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> Change in v2:
> replace Yinbo.Zhu with Yinbo Zhu
>
> drivers/usb/host/ehci-fsl.c | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
This patch doesn't apply against my usb-next branch, what did you
generate it against?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-01-22 8:08 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-21 10:25 [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 2/6] usb: phy: Workaround for USB erratum-A005728 Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 3/6] usb: host: Stops USB controller init if PLL fails to lock Yinbo Zhu
2019-01-22 8:04 ` Greg Kroah-Hartman
2019-01-21 10:25 ` [PATCH v2 4/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 5/6] usb: linux/fsl_device: Add platform member has_fsl_erratum_14 Yinbo Zhu
2019-01-21 10:25 ` [PATCH v2 6/6] usb :fsl: Change string format for errata property Yinbo Zhu
2019-01-22 8:08 ` [PATCH v2 1/6] usb: fsl: Set USB_EN bit to select ULPI phy Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).