linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 1/3] mmc: jz4740: Remove platform data and use standard APIs
Date: Fri, 25 Jan 2019 17:09:25 -0300	[thread overview]
Message-ID: <20190125200927.21045-1-paul@crapouillou.net> (raw)

Drop the custom code to get the 'cd' and 'wp' GPIOs. The driver now
calls mmc_of_parse() which will init these from devicetree or
device properties.

Also drop the custom code to get the 'power' GPIO. The MMC core
provides us with the means to power the MMC card through an external
regulator.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/mmc/host/jz4740_mmc.c | 71 +++++++++----------------------------------
 1 file changed, 14 insertions(+), 57 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 33215d66afa2..e41c7230815f 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -21,7 +21,6 @@
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
-#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -36,7 +35,6 @@
 #include <asm/cacheflush.h>
 
 #include <asm/mach-jz4740/dma.h>
-#include <asm/mach-jz4740/jz4740_mmc.h>
 
 #define JZ_REG_MMC_STRPCL	0x00
 #define JZ_REG_MMC_STATUS	0x04
@@ -148,9 +146,7 @@ enum jz4780_cookie {
 struct jz4740_mmc_host {
 	struct mmc_host *mmc;
 	struct platform_device *pdev;
-	struct jz4740_mmc_platform_data *pdata;
 	struct clk *clk;
-	struct gpio_desc *power;
 
 	enum jz4740_mmc_version version;
 
@@ -894,16 +890,16 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		jz4740_mmc_reset(host);
-		if (host->power)
-			gpiod_set_value(host->power, 1);
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
 		host->cmdat |= JZ_MMC_CMDAT_INIT;
 		clk_prepare_enable(host->clk);
 		break;
 	case MMC_POWER_ON:
 		break;
 	default:
-		if (host->power)
-			gpiod_set_value(host->power, 0);
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 		clk_disable_unprepare(host->clk);
 		break;
 	}
@@ -936,38 +932,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
 	.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
 };
 
-static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host,
-				    struct mmc_host *mmc,
-				    struct platform_device *pdev)
-{
-	struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int ret = 0;
-
-	if (!pdata)
-		return 0;
-
-	if (!pdata->card_detect_active_low)
-		mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
-	if (!pdata->read_only_active_low)
-		mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
-
-	/*
-	 * Get optional card detect and write protect GPIOs,
-	 * only back out on probe deferral.
-	 */
-	ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
-	if (ret == -EPROBE_DEFER)
-		return ret;
-
-	ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL);
-	if (ret == -EPROBE_DEFER)
-		return ret;
-
-	host->power = devm_gpiod_get_optional(&pdev->dev, "power",
-					      GPIOD_OUT_HIGH);
-	return PTR_ERR_OR_ZERO(host->power);
-}
-
 static const struct of_device_id jz4740_mmc_of_match[] = {
 	{ .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
 	{ .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B },
@@ -982,9 +946,6 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	struct mmc_host *mmc;
 	struct jz4740_mmc_host *host;
 	const struct of_device_id *match;
-	struct jz4740_mmc_platform_data *pdata;
-
-	pdata = dev_get_platdata(&pdev->dev);
 
 	mmc = mmc_alloc_host(sizeof(struct jz4740_mmc_host), &pdev->dev);
 	if (!mmc) {
@@ -993,29 +954,25 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	}
 
 	host = mmc_priv(mmc);
-	host->pdata = pdata;
 
 	match = of_match_device(jz4740_mmc_of_match, &pdev->dev);
 	if (match) {
 		host->version = (enum jz4740_mmc_version)match->data;
-		ret = mmc_of_parse(mmc);
-		if (ret) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"could not parse of data: %d\n", ret);
-			goto err_free_host;
-		}
 	} else {
 		/* JZ4740 should be the only one using legacy probe */
 		host->version = JZ_MMC_JZ4740;
-		mmc->caps |= MMC_CAP_SDIO_IRQ;
-		if (!(pdata && pdata->data_1bit))
-			mmc->caps |= MMC_CAP_4_BIT_DATA;
-		ret = jz4740_mmc_request_gpios(host, mmc, pdev);
-		if (ret)
-			goto err_free_host;
 	}
 
+	ret = mmc_of_parse(mmc);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"could not parse device properties: %d\n", ret);
+		goto err_free_host;
+	}
+
+	mmc_regulator_get_supply(mmc);
+
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq < 0) {
 		ret = host->irq;
-- 
2.11.0


             reply	other threads:[~2019-01-25 20:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-25 20:09 Paul Cercueil [this message]
2019-01-25 20:09 ` [PATCH 2/3] MIPS: DTS: jz4740: Add node for the MMC driver Paul Cercueil
2019-07-22 21:22   ` Paul Burton
2019-01-25 20:09 ` [PATCH 3/3] MIPS: qi_lb60: Move MMC configuration to devicetree Paul Cercueil
2019-07-22 22:30   ` Paul Burton
2019-01-26 12:10 ` [PATCH 1/3] mmc: jz4740: Remove platform data and use standard APIs Linus Walleij
2019-01-28 12:02 ` Ulf Hansson
2019-01-28 12:58   ` Paul Cercueil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190125200927.21045-1-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=devicetree@vger.kernel.org \
    --cc=jhogan@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).