linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ulf Hansson <ulf.hansson@linaro.org>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	DTML <devicetree@vger.kernel.org>,
	linux-mips@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>
Subject: Re: [PATCH 1/3] mmc: jz4740: Remove platform data and use standard APIs
Date: Mon, 28 Jan 2019 13:02:58 +0100	[thread overview]
Message-ID: <CAPDyKFrkq4GQbCbcJFqeERt3y41VJ7we+eL9NziPf2Obe+yGkg@mail.gmail.com> (raw)
In-Reply-To: <20190125200927.21045-1-paul@crapouillou.net>

On Fri, 25 Jan 2019 at 21:09, Paul Cercueil <paul@crapouillou.net> wrote:
>
> Drop the custom code to get the 'cd' and 'wp' GPIOs. The driver now
> calls mmc_of_parse() which will init these from devicetree or
> device properties.
>
> Also drop the custom code to get the 'power' GPIO. The MMC core
> provides us with the means to power the MMC card through an external
> regulator.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Applied for next, thanks!

Should I also pick up the other two MIPS patches or you want to funnel
those through the MIPS soc tree?

Kind regards
Uffe

> ---
>  drivers/mmc/host/jz4740_mmc.c | 71 +++++++++----------------------------------
>  1 file changed, 14 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
> index 33215d66afa2..e41c7230815f 100644
> --- a/drivers/mmc/host/jz4740_mmc.c
> +++ b/drivers/mmc/host/jz4740_mmc.c
> @@ -21,7 +21,6 @@
>  #include <linux/dmaengine.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/err.h>
> -#include <linux/gpio/consumer.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/irq.h>
> @@ -36,7 +35,6 @@
>  #include <asm/cacheflush.h>
>
>  #include <asm/mach-jz4740/dma.h>
> -#include <asm/mach-jz4740/jz4740_mmc.h>
>
>  #define JZ_REG_MMC_STRPCL      0x00
>  #define JZ_REG_MMC_STATUS      0x04
> @@ -148,9 +146,7 @@ enum jz4780_cookie {
>  struct jz4740_mmc_host {
>         struct mmc_host *mmc;
>         struct platform_device *pdev;
> -       struct jz4740_mmc_platform_data *pdata;
>         struct clk *clk;
> -       struct gpio_desc *power;
>
>         enum jz4740_mmc_version version;
>
> @@ -894,16 +890,16 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>         switch (ios->power_mode) {
>         case MMC_POWER_UP:
>                 jz4740_mmc_reset(host);
> -               if (host->power)
> -                       gpiod_set_value(host->power, 1);
> +               if (!IS_ERR(mmc->supply.vmmc))
> +                       mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
>                 host->cmdat |= JZ_MMC_CMDAT_INIT;
>                 clk_prepare_enable(host->clk);
>                 break;
>         case MMC_POWER_ON:
>                 break;
>         default:
> -               if (host->power)
> -                       gpiod_set_value(host->power, 0);
> +               if (!IS_ERR(mmc->supply.vmmc))
> +                       mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>                 clk_disable_unprepare(host->clk);
>                 break;
>         }
> @@ -936,38 +932,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
>         .enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
>  };
>
> -static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host,
> -                                   struct mmc_host *mmc,
> -                                   struct platform_device *pdev)
> -{
> -       struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
> -       int ret = 0;
> -
> -       if (!pdata)
> -               return 0;
> -
> -       if (!pdata->card_detect_active_low)
> -               mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
> -       if (!pdata->read_only_active_low)
> -               mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
> -
> -       /*
> -        * Get optional card detect and write protect GPIOs,
> -        * only back out on probe deferral.
> -        */
> -       ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
> -       if (ret == -EPROBE_DEFER)
> -               return ret;
> -
> -       ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL);
> -       if (ret == -EPROBE_DEFER)
> -               return ret;
> -
> -       host->power = devm_gpiod_get_optional(&pdev->dev, "power",
> -                                             GPIOD_OUT_HIGH);
> -       return PTR_ERR_OR_ZERO(host->power);
> -}
> -
>  static const struct of_device_id jz4740_mmc_of_match[] = {
>         { .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
>         { .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B },
> @@ -982,9 +946,6 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
>         struct mmc_host *mmc;
>         struct jz4740_mmc_host *host;
>         const struct of_device_id *match;
> -       struct jz4740_mmc_platform_data *pdata;
> -
> -       pdata = dev_get_platdata(&pdev->dev);
>
>         mmc = mmc_alloc_host(sizeof(struct jz4740_mmc_host), &pdev->dev);
>         if (!mmc) {
> @@ -993,29 +954,25 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
>         }
>
>         host = mmc_priv(mmc);
> -       host->pdata = pdata;
>
>         match = of_match_device(jz4740_mmc_of_match, &pdev->dev);
>         if (match) {
>                 host->version = (enum jz4740_mmc_version)match->data;
> -               ret = mmc_of_parse(mmc);
> -               if (ret) {
> -                       if (ret != -EPROBE_DEFER)
> -                               dev_err(&pdev->dev,
> -                                       "could not parse of data: %d\n", ret);
> -                       goto err_free_host;
> -               }
>         } else {
>                 /* JZ4740 should be the only one using legacy probe */
>                 host->version = JZ_MMC_JZ4740;
> -               mmc->caps |= MMC_CAP_SDIO_IRQ;
> -               if (!(pdata && pdata->data_1bit))
> -                       mmc->caps |= MMC_CAP_4_BIT_DATA;
> -               ret = jz4740_mmc_request_gpios(host, mmc, pdev);
> -               if (ret)
> -                       goto err_free_host;
>         }
>
> +       ret = mmc_of_parse(mmc);
> +       if (ret) {
> +               if (ret != -EPROBE_DEFER)
> +                       dev_err(&pdev->dev,
> +                               "could not parse device properties: %d\n", ret);
> +               goto err_free_host;
> +       }
> +
> +       mmc_regulator_get_supply(mmc);
> +
>         host->irq = platform_get_irq(pdev, 0);
>         if (host->irq < 0) {
>                 ret = host->irq;
> --
> 2.11.0
>

  parent reply	other threads:[~2019-01-28 12:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-25 20:09 [PATCH 1/3] mmc: jz4740: Remove platform data and use standard APIs Paul Cercueil
2019-01-25 20:09 ` [PATCH 2/3] MIPS: DTS: jz4740: Add node for the MMC driver Paul Cercueil
2019-07-22 21:22   ` Paul Burton
2019-01-25 20:09 ` [PATCH 3/3] MIPS: qi_lb60: Move MMC configuration to devicetree Paul Cercueil
2019-07-22 22:30   ` Paul Burton
2019-01-26 12:10 ` [PATCH 1/3] mmc: jz4740: Remove platform data and use standard APIs Linus Walleij
2019-01-28 12:02 ` Ulf Hansson [this message]
2019-01-28 12:58   ` Paul Cercueil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAPDyKFrkq4GQbCbcJFqeERt3y41VJ7we+eL9NziPf2Obe+yGkg@mail.gmail.com \
    --to=ulf.hansson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jhogan@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=paul.burton@mips.com \
    --cc=paul@crapouillou.net \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).