From: Thierry Reding <thierry.reding@gmail.com>
To: jckuo <jckuo@nvidia.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] phy: tegra: xusb: Add support for power supplies
Date: Mon, 28 Jan 2019 09:00:54 +0100 [thread overview]
Message-ID: <20190128080054.GB18124@ulmo> (raw)
In-Reply-To: <786247a4-81d1-9c2e-21b5-258dc818ccb9@nvidia.com>
[-- Attachment #1: Type: text/plain, Size: 4315 bytes --]
On Mon, Jan 28, 2019 at 03:22:09PM +0800, jckuo wrote:
> Hi Thierry,
>
> I think any non-zero return value of
> regulator_bulk_enable()/devm_regulator_bulk_get() means error.
>
> Thanks,
>
> JC
Theoretically I think only regulator_bulk_enable() could return a
positive value, but even so it never will in practice because all of the
regulator_enable() (see _regulator_enable()) calls will only ever return
negative error codes.
I can change this and resend if you have strong concerns about this
possibly missing legitimate error cases.
Thierry
> On 1/25/19 7:25 PM, Thierry Reding wrote:
> > From: Thierry Reding <treding@nvidia.com>
> >
> > Support enabling various supplies needed to provide power to the PLLs
> > and logic used to drive the USB, PCI and SATA pads.
> >
> > Signed-off-by: Thierry Reding <treding@nvidia.com>
> > ---
> > drivers/phy/tegra/xusb.c | 34 +++++++++++++++++++++++++++++++++-
> > drivers/phy/tegra/xusb.h | 5 +++++
> > 2 files changed, 38 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> > index 57a2d08ef6da..e510629f4f1c 100644
> > --- a/drivers/phy/tegra/xusb.c
> > +++ b/drivers/phy/tegra/xusb.c
> > @@ -864,6 +864,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> > struct tegra_xusb_padctl *padctl;
> > const struct of_device_id *match;
> > struct resource *res;
> > + unsigned int i;
> > int err;
> > /* for backwards compatibility with old device trees */
> > @@ -901,14 +902,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> > goto remove;
> > }
> > + padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies,
> > + sizeof(*padctl->supplies), GFP_KERNEL);
> > + if (!padctl->supplies) {
> > + err = -ENOMEM;
> > + goto remove;
> > + }
> > +
> > + for (i = 0; i < padctl->soc->num_supplies; i++)
> > + padctl->supplies[i].supply = padctl->soc->supply_names[i];
> > +
> > + err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
> > + padctl->supplies);
> > + if (err < 0) {
> > + dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
> > + goto remove;
> > + }
> > +
> > err = reset_control_deassert(padctl->rst);
> > if (err < 0)
> > goto remove;
> > + err = regulator_bulk_enable(padctl->soc->num_supplies,
> > + padctl->supplies);
> > + if (err < 0) {
> > + dev_err(&pdev->dev, "failed to enable supplies: %d\n", err);
> > + goto reset;
> > + }
> > +
> > err = tegra_xusb_setup_pads(padctl);
> > if (err < 0) {
> > dev_err(&pdev->dev, "failed to setup pads: %d\n", err);
> > - goto reset;
> > + goto power_down;
> > }
> > err = tegra_xusb_setup_ports(padctl);
> > @@ -921,6 +946,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> > remove_pads:
> > tegra_xusb_remove_pads(padctl);
> > +power_down:
> > + regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies);
> > reset:
> > reset_control_assert(padctl->rst);
> > remove:
> > @@ -936,6 +963,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
> > tegra_xusb_remove_ports(padctl);
> > tegra_xusb_remove_pads(padctl);
> > + err = regulator_bulk_disable(padctl->soc->num_supplies,
> > + padctl->supplies);
> > + if (err < 0)
> > + dev_err(&pdev->dev, "failed to disable supplies: %d\n", err);
> > +
> > err = reset_control_assert(padctl->rst);
> > if (err < 0)
> > dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
> > diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> > index bb60fc09c752..5d5d22f6cb41 100644
> > --- a/drivers/phy/tegra/xusb.h
> > +++ b/drivers/phy/tegra/xusb.h
> > @@ -370,6 +370,9 @@ struct tegra_xusb_padctl_soc {
> > } ports;
> > const struct tegra_xusb_padctl_ops *ops;
> > +
> > + const char * const *supply_names;
> > + unsigned int num_supplies;
> > };
> > struct tegra_xusb_padctl {
> > @@ -393,6 +396,8 @@ struct tegra_xusb_padctl {
> > unsigned int enable;
> > struct clk *clk;
> > +
> > + struct regulator_bulk_data *supplies;
> > };
> > static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-01-28 8:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-25 11:25 [PATCH 1/5] dt-bindings: phy: tegra: Add Tegra186 support Thierry Reding
2019-01-25 11:25 ` [PATCH 2/5] phy: tegra: xusb: Skip single function lane programming Thierry Reding
2019-01-28 7:06 ` jckuo
2019-01-25 11:25 ` [PATCH 3/5] phy: tegra: xusb: Parse dual-role mode property Thierry Reding
2019-01-28 7:08 ` jckuo
2019-01-25 11:25 ` [PATCH 4/5] phy: tegra: xusb: Add support for power supplies Thierry Reding
2019-01-28 7:22 ` jckuo
2019-01-28 8:00 ` Thierry Reding [this message]
2019-01-29 6:50 ` jckuo
2019-02-05 12:55 ` Kishon Vijay Abraham I
2019-02-07 11:11 ` Thierry Reding
2019-01-25 11:25 ` [PATCH 5/5] phy: tegra: xusb: Add Tegra186 support Thierry Reding
2019-01-28 7:45 ` jckuo
2019-02-07 11:47 ` Kishon Vijay Abraham I
2019-02-07 12:17 ` Thierry Reding
2019-01-28 7:04 ` [PATCH 1/5] dt-bindings: phy: tegra: " jckuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190128080054.GB18124@ulmo \
--to=thierry.reding@gmail.com \
--cc=jckuo@nvidia.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).