[PATCH AUTOSEL 3.18 01/61] staging: iio: adc: ad7280a: handle error from __ad7280_read32()

[PATCH AUTOSEL 3.18 01/61] staging: iio: adc: ad7280a: handle error from __ad7280_read32()

[Sasha Levin]

From: Slawomir Stepien <sst@poczta.fm>

[ Upstream commit 0559ef7fde67bc6c83c6eb6329dbd6649528263e ]

Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative
error code. This change will ensure that this error is being passed up
in the call stack, so it can be handled.

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/adc/ad7280a.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index d215edf66af2..0ad4af5d0ae4 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -250,7 +250,9 @@ static int ad7280_read(struct ad7280_state *st, unsigned devaddr,
 	if (ret)
 		return ret;
 
-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;
 
 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -288,7 +290,9 @@ static int ad7280_read_channel(struct ad7280_state *st, unsigned devaddr,
 
 	ad7280_delay(st);
 
-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;
 
 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -321,7 +325,9 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned cnt,
 	ad7280_delay(st);
 
 	for (i = 0; i < cnt; i++) {
-		__ad7280_read32(st, &tmp);
+		ret = __ad7280_read32(st, &tmp);
+		if (ret)
+			return ret;
 
 		if (ad7280_check_crc(st, tmp))
 			return -EIO;
@@ -364,7 +370,10 @@ static int ad7280_chain_setup(struct ad7280_state *st)
 		return ret;
 
 	for (n = 0; n <= AD7280A_MAX_CHAIN; n++) {
-		__ad7280_read32(st, &val);
+		ret = __ad7280_read32(st, &val);
+		if (ret)
+			return ret;
+
 		if (val == 0)
 			return n - 1;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 02/61] ath9k: dynack: use authentication messages for 'late' ack

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit 3831a2a0010c72e3956020cbf1057a1701a2e469 ]

In order to properly support dynack in ad-hoc mode running
wpa_supplicant, take into account authentication frames for
'late ack' detection. This patch has been tested on devices
mounted on offshore high-voltage stations connected through
~24Km link

Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/dynack.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
index 22b3cc4c27cd..64965bf9034d 100644
--- a/drivers/net/wireless/ath/ath9k/dynack.c
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -187,7 +187,8 @@ void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
 	/* late ACK */
 	if (ts->ts_status & ATH9K_TXERR_XRETRY) {
 		if (ieee80211_is_assoc_req(hdr->frame_control) ||
-		    ieee80211_is_assoc_resp(hdr->frame_control)) {
+		    ieee80211_is_assoc_resp(hdr->frame_control) ||
+		    ieee80211_is_auth(hdr->frame_control)) {
 			ath_dbg(common, DYNACK, "late ack\n");
 			ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
 			ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
-- 
2.19.1

[PATCH AUTOSEL 3.18 03/61] platform/x86: asus-nb-wmi: Map 0x35 to KEY_SCREENLOCK

[Sasha Levin]

From: João Paulo Rechi Vita <jprvita@gmail.com>

[ Upstream commit b3f2f3799a972d3863d0fdc2ab6287aef6ca631f ]

When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.

The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.

The key that matches this behavior the closest is KEY_SCREENLOCK.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-nb-wmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index f13b5b95c00f..b46a3653e6ab 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -314,6 +314,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0x32, { KEY_MUTE } },
 	{ KE_KEY, 0x33, { KEY_DISPLAYTOGGLE } }, /* LCD on */
 	{ KE_KEY, 0x34, { KEY_DISPLAY_OFF } }, /* LCD off */
+	{ KE_KEY, 0x35, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0x40, { KEY_PREVIOUSSONG } },
 	{ KE_KEY, 0x41, { KEY_NEXTSONG } },
 	{ KE_KEY, 0x43, { KEY_STOPCD } }, /* Stop/Eject */
-- 
2.19.1

[PATCH AUTOSEL 3.18 04/61] ARM: 8808/1: kexec:offline panic_smp_self_stop CPU

[Sasha Levin]

From: Yufen Wang <wangyufen@huawei.com>

[ Upstream commit 82c08c3e7f171aa7f579b231d0abbc1d62e91974 ]

In case panic() and panic() called at the same time on different CPUS.
For example:
CPU 0:
  panic()
     __crash_kexec
       machine_crash_shutdown
         crash_smp_send_stop
       machine_kexec
         BUG_ON(num_online_cpus() > 1);

CPU 1:
  panic()
    local_irq_disable
    panic_smp_self_stop

If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump
fails. CPU1 can't receive the ipi irq, CPU1 will be always online.
To fix this problem, this patch split out the panic_smp_self_stop()
and add set_cpu_online(smp_processor_id(), false).

Signed-off-by: Yufen Wang <wangyufen@huawei.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/smp.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index a8e32aaf0383..bae65844ff03 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -658,6 +658,21 @@ void smp_send_stop(void)
 		pr_warn("SMP: failed to stop secondary CPUs\n");
 }
 
+/* In case panic() and panic() called at the same time on CPU1 and CPU2,
+ * and CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop()
+ * CPU1 can't receive the ipi irqs from CPU2, CPU1 will be always online,
+ * kdump fails. So split out the panic_smp_self_stop() and add
+ * set_cpu_online(smp_processor_id(), false).
+ */
+void panic_smp_self_stop(void)
+{
+	pr_debug("CPU %u will stop doing anything useful since another CPU has paniced\n",
+	         smp_processor_id());
+	set_cpu_online(smp_processor_id(), false);
+	while (1)
+		cpu_relax();
+}
+
 /*
  * not supported here
  */
-- 
2.19.1

[PATCH AUTOSEL 3.18 05/61] dlm: Don't swamp the CPU with callbacks queued during recovery

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 216f0efd19b9cc32207934fd1b87a45f2c4c593e ]

Before this patch, recovery would cause all callbacks to be delayed,
put on a queue, and afterward they were all queued to the callback
work queue. This patch does the same thing, but occasionally takes
a break after 25 of them so it won't swamp the CPU at the expense
of other RT processes like corosync.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/ast.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/dlm/ast.c b/fs/dlm/ast.c
index dcea1e37a1b7..f18619bc2e09 100644
--- a/fs/dlm/ast.c
+++ b/fs/dlm/ast.c
@@ -290,6 +290,8 @@ void dlm_callback_suspend(struct dlm_ls *ls)
 		flush_workqueue(ls->ls_callback_wq);
 }
 
+#define MAX_CB_QUEUE 25
+
 void dlm_callback_resume(struct dlm_ls *ls)
 {
 	struct dlm_lkb *lkb, *safe;
@@ -300,15 +302,23 @@ void dlm_callback_resume(struct dlm_ls *ls)
 	if (!ls->ls_callback_wq)
 		return;
 
+more:
 	mutex_lock(&ls->ls_cb_mutex);
 	list_for_each_entry_safe(lkb, safe, &ls->ls_cb_delay, lkb_cb_list) {
 		list_del_init(&lkb->lkb_cb_list);
 		queue_work(ls->ls_callback_wq, &lkb->lkb_cb_work);
 		count++;
+		if (count == MAX_CB_QUEUE)
+			break;
 	}
 	mutex_unlock(&ls->ls_cb_mutex);
 
 	if (count)
 		log_rinfo(ls, "dlm_callback_resume %d", count);
+	if (count == MAX_CB_QUEUE) {
+		count = 0;
+		cond_resched();
+		goto more;
+	}
 }
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 06/61] x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 53bb565fc5439f2c8c57a786feea5946804aa3e9 ]

In the expression "word1 << 16", word1 starts as u16, but is promoted to a
signed int, then sign-extended to resource_size_t, which is probably not
what was intended.  Cast to resource_size_t to avoid the sign extension.

This fixes an identical issue as fixed by commit 0b2d70764bb3 ("x86/PCI:
Fix Broadcom CNB20LE unintended sign extension") back in 2014.

Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension")

Fixes: 3f6ea84a3035 ("PCI: read memory ranges out of Broadcom CNB20LE host bridge")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/pci/broadcom_bus.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c
index 526536c81ddc..ca1e8e6dccc8 100644
--- a/arch/x86/pci/broadcom_bus.c
+++ b/arch/x86/pci/broadcom_bus.c
@@ -50,8 +50,8 @@ static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
 	word1 = read_pci_config_16(bus, slot, func, 0xc0);
 	word2 = read_pci_config_16(bus, slot, func, 0xc2);
 	if (word1 != word2) {
-		res.start = (word1 << 16) | 0x0000;
-		res.end   = (word2 << 16) | 0xffff;
+		res.start = ((resource_size_t) word1 << 16) | 0x0000;
+		res.end   = ((resource_size_t) word2 << 16) | 0xffff;
 		res.flags = IORESOURCE_MEM;
 		update_res(info, res.start, res.end, res.flags, 0);
 	}
-- 
2.19.1

[PATCH AUTOSEL 3.18 07/61] powerpc/pseries: add of_node_put() in dlpar_detach_node()

[Sasha Levin]

From: Frank Rowand <frank.rowand@sony.com>

[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]

The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs().  This results in a refcount imbalance
for nodes attached with dlpar_attach_node().  The calling sequence
from dlpar_attach_node() to __of_attach_node_sysfs() is:

   dlpar_attach_node()
      of_attach_node()
         __of_attach_node_sysfs()

For more detailed description of the node refcount, see
commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow
during DLPAR remove").

Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dlpar.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 80d175dca68e..85bd29475987 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -299,6 +299,8 @@ int dlpar_detach_node(struct device_node *dn)
 	if (rc)
 		return rc;
 
+	of_node_put(dn);
+
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 08/61] serial: fsl_lpuart: clear parity enable bit when disable parity

[Sasha Levin]

From: Andy Duan <fugang.duan@nxp.com>

[ Upstream commit 397bd9211fe014b347ca8f95a8f4e1017bac1aeb ]

Current driver only enable parity enable bit and never clear it
when user set the termios. The fix clear the parity enable bit when
PARENB flag is not set in termios->c_cflag.

Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Andy Duan <fugang.duan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/fsl_lpuart.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 92b7a5bf7c4d..839e65da4d3f 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1284,6 +1284,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 			else
 				cr1 &= ~UARTCR1_PT;
 		}
+	} else {
+		cr1 &= ~UARTCR1_PE;
 	}
 
 	/* ask the core to calculate the divisor */
@@ -1419,6 +1421,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 			else
 				ctrl &= ~UARTCTRL_PT;
 		}
+	} else {
+		ctrl &= ~UARTCTRL_PE;
 	}
 
 	/* ask the core to calculate the divisor */
-- 
2.19.1

[PATCH AUTOSEL 3.18 09/61] serial: core: Allow processing sysrq at port unlock time

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit d6e1935819db0c91ce4a5af82466f3ab50d17346 ]

Right now serial drivers process sysrq keys deep in their character
receiving code.  This means that they've already grabbed their
port->lock spinlock.  This can end up getting in the way if we've go
to do serial stuff (especially kgdb) in response to the sysrq.

Serial drivers have various hacks in them to handle this.  Looking at
'8250_port.c' you can see that the console_write() skips locking if
we're in the sysrq handler.  Looking at 'msm_serial.c' you can see
that the port lock is dropped around uart_handle_sysrq_char().

It turns out that these hacks aren't exactly perfect.  If you have
lockdep turned on and use something like the 8250_port hack you'll get
a splat that looks like:

  WARNING: possible circular locking dependency detected
  [...] is trying to acquire lock:
  ... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4

  but task is already holding lock:
  ... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (&port_lock_key){-.-.}:
         _raw_spin_lock_irqsave+0x58/0x70
         serial8250_console_write+0xa8/0x250
         univ8250_console_write+0x40/0x4c
         console_unlock+0x528/0x5e4
         register_console+0x2c4/0x3b0
         uart_add_one_port+0x350/0x478
         serial8250_register_8250_port+0x350/0x3a8
         dw8250_probe+0x67c/0x754
         platform_drv_probe+0x58/0xa4
         really_probe+0x150/0x294
         driver_probe_device+0xac/0xe8
         __driver_attach+0x98/0xd0
         bus_for_each_dev+0x84/0xc8
         driver_attach+0x2c/0x34
         bus_add_driver+0xf0/0x1ec
         driver_register+0xb4/0x100
         __platform_driver_register+0x60/0x6c
         dw8250_platform_driver_init+0x20/0x28
	 ...

  -> #0 (console_owner){-.-.}:
         lock_acquire+0x1e8/0x214
         console_unlock+0x35c/0x5e4
         vprintk_emit+0x230/0x274
         vprintk_default+0x7c/0x84
         vprintk_func+0x190/0x1bc
         printk+0x80/0xa0
         __handle_sysrq+0x104/0x21c
         handle_sysrq+0x30/0x3c
         serial8250_read_char+0x15c/0x18c
         serial8250_rx_chars+0x34/0x74
         serial8250_handle_irq+0x9c/0xe4
         dw8250_handle_irq+0x98/0xcc
         serial8250_interrupt+0x50/0xe8
         ...

  other info that might help us debug this:

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&port_lock_key);
                                 lock(console_owner);
                                 lock(&port_lock_key);
    lock(console_owner);

   *** DEADLOCK ***

The hack used in 'msm_serial.c' doesn't cause the above splats but it
seems a bit ugly to unlock / lock our spinlock deep in our irq
handler.

It seems like we could defer processing the sysrq until the end of the
interrupt handler right after we've unlocked the port.  With this
scheme if a whole batch of sysrq characters comes in one irq then we
won't handle them all, but that seems like it should be a fine
compromise.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/serial_core.h | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 21c2e05c1bc3..151e81709abc 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -155,6 +155,7 @@ struct uart_port {
 	struct console		*cons;			/* struct console, if any */
 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
 	unsigned long		sysrq;			/* sysrq timeout */
+	unsigned int		sysrq_ch;		/* char for sysrq */
 #endif
 
 	/* flags must be updated while holding port mutex */
@@ -396,8 +397,42 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
 	}
 	return 0;
 }
+static inline int
+uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
+{
+	if (port->sysrq) {
+		if (ch && time_before(jiffies, port->sysrq)) {
+			port->sysrq_ch = ch;
+			port->sysrq = 0;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+	return 0;
+}
+static inline void
+uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+{
+	int sysrq_ch;
+
+	sysrq_ch = port->sysrq_ch;
+	port->sysrq_ch = 0;
+
+	spin_unlock_irqrestore(&port->lock, irqflags);
+
+	if (sysrq_ch)
+		handle_sysrq(sysrq_ch);
+}
 #else
-#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
+static inline int
+uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) { return 0; }
+static inline int
+uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) { return 0; }
+static inline void
+uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+{
+	spin_unlock_irqrestore(&port->lock, irqflags);
+}
 #endif
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 3.18 10/61] staging:iio:ad2s90: Make probe handle spi_setup failure

[Sasha Levin]

From: Matheus Tavares <matheus.bernardino@usp.br>

[ Upstream commit b3a3eafeef769c6982e15f83631dcbf8d1794efb ]

Previously, ad2s90_probe ignored the return code from spi_setup, not
handling its possible failure. This patch makes ad2s90_probe check if
the code is an error code and, if so, do the following:

- Call dev_err with an appropriate error message.
- Return the spi_setup's error code.

Note: The 'return ret' statement could be out of the 'if' block, but
this whole block will be moved up in the function in the patch:
'staging:iio:ad2s90: Move device registration to the end of probe'.

Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/resolver/ad2s90.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index e24c5890652f..c0cee97bd0f1 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -86,7 +86,12 @@ static int ad2s90_probe(struct spi_device *spi)
 	/* need 600ns between CS and the first falling edge of SCLK */
 	spi->max_speed_hz = 830000;
 	spi->mode = SPI_MODE_3;
-	spi_setup(spi);
+	ret = spi_setup(spi);
+
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi_setup failed!\n");
+		return ret;
+	}
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 11/61] staging: iio: ad7780: update voltage on read

[Sasha Levin]

From: Renato Lui Geh <renatogeh@gmail.com>

[ Upstream commit 336650c785b62c3bea7c8cf6061c933a90241f67 ]

The ad7780 driver previously did not read the correct device output, as
it read an outdated value set at initialization. It now updates its
voltage on read.

Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/iio/adc/ad7780.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index 273add3ed63f..5a3072740326 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -90,12 +90,16 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7780_state *st = iio_priv(indio_dev);
+	int voltage_uv;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = st->int_vref_mv * st->gain;
+		voltage_uv = regulator_get_voltage(st->reg);
+		if (voltage_uv < 0)
+			return voltage_uv;
+		*val = (voltage_uv / 1000) * st->gain;
 		*val2 = chan->scan_type.realbits - 1;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
-- 
2.19.1

[PATCH AUTOSEL 3.18 12/61] ARM: OMAP2+: hwmod: Fix some section annotations

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit c10b26abeb53cabc1e6271a167d3f3d396ce0218 ]

When building the kernel with Clang, the following section mismatch
warnings appears:

WARNING: vmlinux.o(.text+0x2d398): Section mismatch in reference from
the function _setup() to the function .init.text:_setup_iclk_autoidle()
The function _setup() references
the function __init _setup_iclk_autoidle().
This is often because _setup lacks a __init
annotation or the annotation of _setup_iclk_autoidle is wrong.

WARNING: vmlinux.o(.text+0x2d3a0): Section mismatch in reference from
the function _setup() to the function .init.text:_setup_reset()
The function _setup() references
the function __init _setup_reset().
This is often because _setup lacks a __init
annotation or the annotation of _setup_reset is wrong.

WARNING: vmlinux.o(.text+0x2d408): Section mismatch in reference from
the function _setup() to the function .init.text:_setup_postsetup()
The function _setup() references
the function __init _setup_postsetup().
This is often because _setup lacks a __init
annotation or the annotation of _setup_postsetup is wrong.

_setup is used in omap_hwmod_allocate_module, which isn't marked __init
and looks like it shouldn't be, meaning to fix these warnings, those
functions must be moved out of the init section, which this patch does.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e67ffbc9ec40..0e17fa4ca419 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2578,7 +2578,7 @@ static int __init _init(struct omap_hwmod *oh, void *data)
  * a stub; implementing this properly requires iclk autoidle usecounting in
  * the clock code.   No return value.
  */
-static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
+static void _setup_iclk_autoidle(struct omap_hwmod *oh)
 {
 	struct omap_hwmod_ocp_if *os;
 	struct list_head *p;
@@ -2613,7 +2613,7 @@ static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
  * reset.  Returns 0 upon success or a negative error code upon
  * failure.
  */
-static int __init _setup_reset(struct omap_hwmod *oh)
+static int _setup_reset(struct omap_hwmod *oh)
 {
 	int r;
 
@@ -2674,7 +2674,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
  *
  * No return value.
  */
-static void __init _setup_postsetup(struct omap_hwmod *oh)
+static void _setup_postsetup(struct omap_hwmod *oh)
 {
 	u8 postsetup_state;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 13/61] modpost: validate symbol names also in find_elf_symbol

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 5818c683a619c534c113e1f66d24f636defc29bc ]

If an ARM mapping symbol shares an address with a valid symbol,
find_elf_symbol can currently return the mapping symbol instead, as the
symbol is not validated. This can result in confusing warnings:

  WARNING: vmlinux.o(.text+0x18f4028): Section mismatch in reference
  from the function set_reset_devices() to the variable .init.text:$x.0

This change adds a call to is_valid_name to find_elf_symbol, similarly
to how it's already used in find_elf_symbol2.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mod/modpost.c | 50 ++++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 24 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 9c06b5d62e90..2ff9ed878f9d 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1134,6 +1134,30 @@ static int secref_whitelist(const struct sectioncheck *mismatch,
 	return 1;
 }
 
+static inline int is_arm_mapping_symbol(const char *str)
+{
+	return str[0] == '$' && strchr("axtd", str[1])
+	       && (str[2] == '\0' || str[2] == '.');
+}
+
+/*
+ * If there's no name there, ignore it; likewise, ignore it if it's
+ * one of the magic symbols emitted used by current ARM tools.
+ *
+ * Otherwise if find_symbols_between() returns those symbols, they'll
+ * fail the whitelist tests and cause lots of false alarms ... fixable
+ * only by merging __exit and __init sections into __text, bloating
+ * the kernel (which is especially evil on embedded platforms).
+ */
+static inline int is_valid_name(struct elf_info *elf, Elf_Sym *sym)
+{
+	const char *name = elf->strtab + sym->st_name;
+
+	if (!name || !strlen(name))
+		return 0;
+	return !is_arm_mapping_symbol(name);
+}
+
 /**
  * Find symbol based on relocation record info.
  * In some cases the symbol supplied is a valid symbol so
@@ -1159,6 +1183,8 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
 			continue;
 		if (ELF_ST_TYPE(sym->st_info) == STT_SECTION)
 			continue;
+		if (!is_valid_name(elf, sym))
+			continue;
 		if (sym->st_value == addr)
 			return sym;
 		/* Find a symbol nearby - addr are maybe negative */
@@ -1177,30 +1203,6 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
 		return NULL;
 }
 
-static inline int is_arm_mapping_symbol(const char *str)
-{
-	return str[0] == '$' && strchr("axtd", str[1])
-	       && (str[2] == '\0' || str[2] == '.');
-}
-
-/*
- * If there's no name there, ignore it; likewise, ignore it if it's
- * one of the magic symbols emitted used by current ARM tools.
- *
- * Otherwise if find_symbols_between() returns those symbols, they'll
- * fail the whitelist tests and cause lots of false alarms ... fixable
- * only by merging __exit and __init sections into __text, bloating
- * the kernel (which is especially evil on embedded platforms).
- */
-static inline int is_valid_name(struct elf_info *elf, Elf_Sym *sym)
-{
-	const char *name = elf->strtab + sym->st_name;
-
-	if (!name || !strlen(name))
-		return 0;
-	return !is_arm_mapping_symbol(name);
-}
-
 /*
  * Find symbols before or equal addr and after addr - in the section sec.
  * If we find two symbols with equal offset prefer one with a valid name.
-- 
2.19.1

[PATCH AUTOSEL 3.18 14/61] perf tools: Add Hygon Dhyana support

[Sasha Levin]

From: Pu Wen <puwen@hygon.cn>

[ Upstream commit 4787eff3fa88f62fede6ed7afa06477ae6bf984d ]

The tool perf is useful for the performance analysis on the Hygon Dhyana
platform. But right now there is no Hygon support for it to analyze the
KVM guest os data. So add Hygon Dhyana support to it by checking vendor
string to share the code path of AMD.

Signed-off-by: Pu Wen <puwen@hygon.cn>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/x86/util/kvm-stat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/arch/x86/util/kvm-stat.c b/tools/perf/arch/x86/util/kvm-stat.c
index 14e4e668fad7..f97696a418cc 100644
--- a/tools/perf/arch/x86/util/kvm-stat.c
+++ b/tools/perf/arch/x86/util/kvm-stat.c
@@ -146,7 +146,7 @@ int cpu_isa_init(struct perf_kvm_stat *kvm, const char *cpuid)
 	if (strstr(cpuid, "Intel")) {
 		kvm->exit_reasons = vmx_exit_reasons;
 		kvm->exit_reasons_isa = "VMX";
-	} else if (strstr(cpuid, "AMD")) {
+	} else if (strstr(cpuid, "AMD") || strstr(cpuid, "Hygon")) {
 		kvm->exit_reasons = svm_exit_reasons;
 		kvm->exit_reasons_isa = "SVM";
 	} else
-- 
2.19.1

[PATCH AUTOSEL 3.18 15/61] soc/tegra: Don't leak device tree node reference

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 9eb40fa2cd2d1f6829e7b49bb22692f754b9cfe0 ]

of_find_node_by_path() acquires a reference to the node returned by it
and that reference needs to be dropped by its caller. soc_is_tegra()
doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
[treding: slightly rewrite to avoid inline comparison]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/common.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/tegra/common.c b/drivers/soc/tegra/common.c
index a71cb74f3674..04323ade15dd 100644
--- a/drivers/soc/tegra/common.c
+++ b/drivers/soc/tegra/common.c
@@ -20,11 +20,15 @@ static const struct of_device_id tegra_machine_match[] = {
 
 bool soc_is_tegra(void)
 {
+	const struct of_device_id *match;
 	struct device_node *root;
 
 	root = of_find_node_by_path("/");
 	if (!root)
 		return false;
 
-	return of_match_node(tegra_machine_match, root) != NULL;
+	match = of_match_node(tegra_machine_match, root);
+	of_node_put(root);
+
+	return match != NULL;
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 16/61] f2fs: move dir data flush to write checkpoint process

[Sasha Levin]

From: Yunlei He <heyunlei@huawei.com>

[ Upstream commit b61ac5b720146c619c7cdf17eff2551b934399e5 ]

This patch move dir data flush to write checkpoint process, by
doing this, it may reduce some time for dir fsync.

pre:
	-f2fs_do_sync_file enter
		-file_write_and_wait_range  <- flush & wait
		-write_checkpoint
			-do_checkpoint	    <- wait all
	-f2fs_do_sync_file exit

now:
	-f2fs_do_sync_file enter
		-write_checkpoint
			-block_operations   <- flush dir & no wait
			-do_checkpoint	    <- wait all
	-f2fs_do_sync_file exit

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 8e68bb64f835..c4ba75acc6e2 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -153,6 +153,9 @@ int f2fs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 
 	trace_f2fs_sync_file_enter(inode);
 
+	if (S_ISDIR(inode->i_mode))
+		goto go_write;
+
 	/* if fdatasync is triggered, let's do in-place-update */
 	if (get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks)
 		set_inode_flag(fi, FI_NEED_IPU);
-- 
2.19.1

[PATCH AUTOSEL 3.18 17/61] nfsd4: fix crash on writing v4_end_grace before nfsd startup

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 62a063b8e7d1db684db3f207261a466fa3194e72 ]

Anatoly Trosinenko reports that this:

1) Checkout fresh master Linux branch (tested with commit e195ca6cb)
2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build
3) From `kvm-xfstests shell`:

results in NULL dereference in locks_end_grace.

Check that nfsd has been started before trying to end the grace period.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/nfsctl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index ca73ca79a0ee..0e8574af298b 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1110,6 +1110,8 @@ static ssize_t write_v4_end_grace(struct file *file, char *buf, size_t size)
 		case 'Y':
 		case 'y':
 		case '1':
+			if (nn->nfsd_serv)
+				return -EBUSY;
 			nfsd4_end_grace(nn);
 			break;
 		default:
-- 
2.19.1

[PATCH AUTOSEL 3.18 18/61] arm64: ftrace: don't adjust the LR value

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 6e803e2e6e367db9a0d6ecae1bd24bb5752011bd ]

The core ftrace code requires that when it is handed the PC of an
instrumented function, this PC is the address of the instrumented
instruction. This is necessary so that the core ftrace code can identify
the specific instrumentation site. Since the instrumented function will
be a BL, the address of the instrumented function is LR - 4 at entry to
the ftrace code.

This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers,
which acquire the PC of the instrumented function.

The mcount_get_lr helper is used to acquire the LR of the instrumented
function, whose value does not require this adjustment, and cannot be
adjusted to anything meaningful. No adjustment of this value is made on
other architectures, including arm. However, arm64 adjusts this value by
4.

This patch brings arm64 in line with other architectures and removes the
adjustment of the LR value.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/entry-ftrace.S | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
index c85a02b6cca0..b3fdbba80d4b 100644
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -78,7 +78,6 @@
 	.macro mcount_get_lr reg
 	ldr	\reg, [x29]
 	ldr	\reg, [\reg, #8]
-	mcount_adjust_addr	\reg, \reg
 	.endm
 
 	.macro mcount_get_lr_addr reg
-- 
2.19.1

[PATCH AUTOSEL 3.18 19/61] ARM: mmp/mmp2: dt: enable the clock

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit f36797ee43802b367e59f0f9a9805304a4ff0c98 ]

The device-tree booted MMP2 needs to enable the timer clock, otherwise
it would stop ticking when the boot finishes.

It can also use the clock rate from the clk, the non-DT boards need to
keep using the hardcoded rates.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-mmp/common.h |  2 +-
 arch/arm/mach-mmp/mmp2.c   |  2 +-
 arch/arm/mach-mmp/pxa168.c |  2 +-
 arch/arm/mach-mmp/time.c   | 32 ++++++++++++++++++++------------
 4 files changed, 23 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index cf445bae6d77..69c7eec6d1e0 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,7 +1,7 @@
 #include <linux/reboot.h>
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
-extern void timer_init(int irq);
+extern void timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index a70b5530bd42..90a0d8114af2 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -133,7 +133,7 @@ void __init mmp2_timer_init(void)
 	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
 	__raw_writel(clk_rst, APBC_TIMERS);
 
-	timer_init(IRQ_MMP2_TIMER1);
+	timer_init(IRQ_MMP2_TIMER1, 6500000);
 }
 
 /* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 144e997624c0..5a616db7f392 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -78,7 +78,7 @@ void __init pxa168_timer_init(void)
 	/* 3.25MHz, bus/functional clock enabled, release reset */
 	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
-	timer_init(IRQ_PXA168_TIMER1);
+	timer_init(IRQ_PXA168_TIMER1, 6500000);
 }
 
 void pxa168_clear_keypad_wakeup(void)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 2756351dbb35..b66ea443f154 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -39,12 +40,6 @@
 
 #include "clock.h"
 
-#ifdef CONFIG_CPU_MMP2
-#define MMP_CLOCK_FREQ		6500000
-#else
-#define MMP_CLOCK_FREQ		3250000
-#endif
-
 #define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
 
 #define MAX_DELTA		(0xfffffffe)
@@ -197,19 +192,18 @@ static struct irqaction timer_irq = {
 	.dev_id		= &ckevt,
 };
 
-void __init timer_init(int irq)
+void __init timer_init(int irq, unsigned long rate)
 {
 	timer_config();
 
-	sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
+	sched_clock_register(mmp_read_sched_clock, 32, rate);
 
 	ckevt.cpumask = cpumask_of(0);
 
 	setup_irq(irq, &timer_irq);
 
-	clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
-	clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
-					MIN_DELTA, MAX_DELTA);
+	clocksource_register_hz(&cksrc, rate);
+	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
 }
 
 #ifdef CONFIG_OF
@@ -221,7 +215,9 @@ static struct of_device_id mmp_timer_dt_ids[] = {
 void __init mmp_dt_init_timer(void)
 {
 	struct device_node *np;
+	struct clk *clk;
 	int irq, ret;
+	unsigned long rate;
 
 	np = of_find_matching_node(NULL, mmp_timer_dt_ids);
 	if (!np) {
@@ -229,6 +225,18 @@ void __init mmp_dt_init_timer(void)
 		goto out;
 	}
 
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			goto out;
+		rate = clk_get_rate(clk) / 2;
+	} else if (cpu_is_pj4()) {
+		rate = 6500000;
+	} else {
+		rate = 3250000;
+	}
+
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		ret = -EINVAL;
@@ -239,7 +247,7 @@ void __init mmp_dt_init_timer(void)
 		ret = -ENOMEM;
 		goto out;
 	}
-	timer_init(irq);
+	timer_init(irq, rate);
 	return;
 out:
 	pr_err("Failed to get timer from device tree with error:%d\n", ret);
-- 
2.19.1

[PATCH AUTOSEL 3.18 20/61] media: DaVinci-VPBE: fix error handling in vpbe_initialize()

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit aa35dc3c71950e3fec3e230c06c27c0fbd0067f8 ]

If vpbe_set_default_output() or vpbe_set_default_mode() fails,
vpbe_initialize() returns error code without releasing resources.

The patch adds error handling for that case.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/vpbe.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
index 33b9660b7f77..40d462cac5ec 100644
--- a/drivers/media/platform/davinci/vpbe.c
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -740,7 +740,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
 	if (ret) {
 		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
 			 def_output);
-		return ret;
+		goto fail_kfree_amp;
 	}
 
 	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
@@ -748,12 +748,15 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
 	if (ret) {
 		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
 			 def_mode);
-		return ret;
+		goto fail_kfree_amp;
 	}
 	vpbe_dev->initialized = 1;
 	/* TBD handling of bootargs for default output and mode */
 	return 0;
 
+fail_kfree_amp:
+	mutex_lock(&vpbe_dev->lock);
+	kfree(vpbe_dev->amp);
 fail_kfree_encoders:
 	kfree(vpbe_dev->encoders);
 fail_dev_unregister:
-- 
2.19.1

[PATCH AUTOSEL 3.18 21/61] smack: fix access permissions for keyring

[Sasha Levin]

From: Zoran Markovic <zmarkovic@sierrawireless.com>

[ Upstream commit 5b841bfab695e3b8ae793172a9ff7990f99cc3e2 ]

Function smack_key_permission() only issues smack requests for the
following operations:
 - KEY_NEED_READ (issues MAY_READ)
 - KEY_NEED_WRITE (issues MAY_WRITE)
 - KEY_NEED_LINK (issues MAY_WRITE)
 - KEY_NEED_SETATTR (issues MAY_WRITE)
A blank smack request is issued in all other cases, resulting in
smack access being granted if there is any rule defined between
subject and object, or denied with -EACCES otherwise.

Request MAY_READ access for KEY_NEED_SEARCH and KEY_NEED_VIEW.
Fix the logic in the unlikely case when both MAY_READ and
MAY_WRITE are needed. Validate access permission field for valid
contents.

Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smack_lsm.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 59350f6b7e8d..e36976ed38e4 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -3847,6 +3847,12 @@ static int smack_key_permission(key_ref_t key_ref,
 	int request = 0;
 	int rc;
 
+	/*
+	 * Validate requested permissions
+	 */
+	if (perm & ~KEY_NEED_ALL)
+		return -EINVAL;
+
 	keyp = key_ref_to_ptr(key_ref);
 	if (keyp == NULL)
 		return -EINVAL;
@@ -3866,10 +3872,10 @@ static int smack_key_permission(key_ref_t key_ref,
 	ad.a.u.key_struct.key = keyp->serial;
 	ad.a.u.key_struct.key_desc = keyp->description;
 #endif
-	if (perm & KEY_NEED_READ)
-		request = MAY_READ;
+	if (perm & (KEY_NEED_READ | KEY_NEED_SEARCH | KEY_NEED_VIEW))
+		request |= MAY_READ;
 	if (perm & (KEY_NEED_WRITE | KEY_NEED_LINK | KEY_NEED_SETATTR))
-		request = MAY_WRITE;
+		request |= MAY_WRITE;
 	rc = smk_access(tkp, keyp->security, request, &ad);
 	rc = smk_bu_note("key access", tkp, keyp->security, request, rc);
 	return rc;
-- 
2.19.1

[PATCH AUTOSEL 3.18 22/61] usb: hub: delay hub autosuspend if USB3 port is still link training

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit e86108940e541febf35813402ff29fa6f4a9ac0b ]

When initializing a hub we want to give a USB3 port in link training
the same debounce delay time before autosuspening the hub as already
trained, connected enabled ports.

USB3 ports won't reach the enabled state with "current connect status" and
"connect status change" bits set until the USB3 link training finishes.

Catching the port in link training (polling) and adding the debounce delay
prevents unnecessary failed attempts to autosuspend the hub.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/hub.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 19cc2c03906d..adf8dea1f6f3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1117,6 +1117,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 						   USB_PORT_FEAT_ENABLE);
 		}
 
+		/*
+		 * Add debounce if USB3 link is in polling/link training state.
+		 * Link will automatically transition to Enabled state after
+		 * link training completes.
+		 */
+		if (hub_is_superspeed(hdev) &&
+		    ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+						USB_SS_PORT_LS_POLLING))
+			need_debounce_delay = true;
+
 		/* Clear status-change flags; we'll debounce later */
 		if (portchange & USB_PORT_STAT_C_CONNECTION) {
 			need_debounce_delay = true;
-- 
2.19.1

[PATCH AUTOSEL 3.18 23/61] timekeeping: Use proper seqcount initializer

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit ce10a5b3954f2514af726beb78ed8d7350c5e41c ]

tk_core.seq is initialized open coded, but that misses to initialize the
lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq
consequently lack a name and are hard to read.

Use the proper initializer which takes care of the lockdep map
initialization.

[ tglx: Massaged changelog ]

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: tj@kernel.org
Cc: johannes.berg@intel.com
Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 70e3e6ae06d2..05397615d048 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -39,7 +39,9 @@
 static struct {
 	seqcount_t		seq;
 	struct timekeeper	timekeeper;
-} tk_core ____cacheline_aligned;
+} tk_core ____cacheline_aligned = {
+	.seq = SEQCNT_ZERO(tk_core.seq),
+};
 
 static DEFINE_RAW_SPINLOCK(timekeeper_lock);
 static struct timekeeper shadow_timekeeper;
-- 
2.19.1

[PATCH AUTOSEL 3.18 24/61] ARM: dts: Fix OMAP4430 SDP Ethernet startup

[Sasha Levin]

From: Russell King - ARM Linux <linux@armlinux.org.uk>

[ Upstream commit 84fb6c7feb1494ebb7d1ec8b95cfb7ada0264465 ]

It was noticed that unbinding and rebinding the KSZ8851 ethernet
resulted in the driver reporting "failed to read device ID" at probe.
Probing the reset line with a 'scope while repeatedly attempting to
bind the driver in a shell loop revealed that the KSZ8851 RSTN pin is
constantly held at zero, meaning the device is held in reset, and
does not respond on the SPI bus.

Experimentation with the startup delay on the regulator set to 50ms
shows that the reset is positively released after 20ms.

Schematics for this board are not available, and the traces are buried
in the inner layers of the board which makes tracing where the RSTN pin
extremely difficult.  We can only guess that the RSTN pin is wired to a
reset generator chip driven off the ethernet supply, which fits the
observed behaviour.

Include this delay in the regulator startup delay - effectively
treating the reset as a "supply stable" indicator.

This can not be modelled as a delay in the KSZ8851 driver since the
reset generation is board specific - if the RSTN pin had been wired to
a GPIO, reset could be released earlier via the already provided support
in the KSZ8851 driver.

This also got confirmed by Peter Ujfalusi <peter.ujfalusi@ti.com> based
on Blaze schematics that should be very close to SDP4430:

TPS22902YFPR is used as the regulator switch (gpio48 controlled):
Convert arm boot_lock to raw The VOUT is routed to TPS3808G01DBV.
(SCH Note: Threshold set at 90%. Vsense: 0.405V).

According to the TPS3808 data sheet the RESET delay time when Ct is
open (this is the case in the schema): MIN/TYP/MAX: 12/20/28 ms.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated with notes from schematics from Peter]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap4-sdp.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3e1da43068f6..4669854614c3 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -33,6 +33,7 @@
 		gpio = <&gpio2 16 0>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
+		startup-delay-us = <25000>;
 	};
 
 	vbat: fixedregulator-vbat {
-- 
2.19.1

[PATCH AUTOSEL 3.18 25/61] mips: bpf: fix encoding bug for mm_srlv32_op

[Sasha Levin]

From: Jiong Wang <jiong.wang@netronome.com>

[ Upstream commit 17f6c83fb5ebf7db4fcc94a5be4c22d5a7bfe428 ]

For micro-mips, srlv inside POOL32A encoding space should use 0x50
sub-opcode, NOT 0x90.

Some early version ISA doc describes the encoding as 0x90 for both srlv and
srav, this looks to me was a typo. I checked Binutils libopcode
implementation which is using 0x50 for srlv and 0x90 for srav.

v1->v2:
  - Keep mm_srlv32_op sorted by value.

Fixes: f31318fdf324 ("MIPS: uasm: Add srlv uasm instruction")
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/uapi/asm/inst.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index 4bfdb9d4c186..3eb4d6177266 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -262,8 +262,8 @@ enum mm_32a_minor_op {
 	mm_ext_op = 0x02c,
 	mm_pool32axf_op = 0x03c,
 	mm_srl32_op = 0x040,
+	mm_srlv32_op = 0x050,
 	mm_sra_op = 0x080,
-	mm_srlv32_op = 0x090,
 	mm_rotr_op = 0x0c0,
 	mm_lwxs_op = 0x118,
 	mm_addu32_op = 0x150,
-- 
2.19.1

[PATCH AUTOSEL 3.18 26/61] sata_rcar: fix deferred probing

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 9f83cfdb1ace3ef268ecc6fda50058d2ec37d603 ]

The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/sata_rcar.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index ea1fbc1d4c5f..e7e259a6c732 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -879,7 +879,9 @@ static int sata_rcar_probe(struct platform_device *pdev)
 	int ret = 0;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
+	if (irq < 0)
+		return irq;
+	if (!irq)
 		return -EINVAL;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct sata_rcar_priv),
-- 
2.19.1

[PATCH AUTOSEL 3.18 27/61] clk: imx6sl: ensure MMDC CH0 handshake is bypassed

[Sasha Levin]

From: Anson Huang <anson.huang@nxp.com>

[ Upstream commit 0efcc2c0fd2001a83240a8c3d71f67770484917e ]

Same as other i.MX6 SoCs, ensure unused MMDC channel's
handshake is bypassed, this is to make sure no request
signal will be generated when periphe_clk_sel is changed
or SRC warm reset is triggered.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-imx/clk-imx6sl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index e982ebe10814..a99af8bd0571 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -18,6 +18,8 @@
 #include "clk.h"
 #include "common.h"
 
+#define CCDR				0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK	(1 << 17)
 #define CCSR			0xc
 #define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
 #define CACRR			0x10
@@ -410,6 +412,10 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_USDHC3]       = imx_clk_gate2("usdhc3",       "usdhc3_podf",       base + 0x80, 6);
 	clks[IMX6SL_CLK_USDHC4]       = imx_clk_gate2("usdhc4",       "usdhc4_podf",       base + 0x80, 8);
 
+	/* Ensure the MMDC CH0 handshake is bypassed */
+	writel_relaxed(readl_relaxed(base + CCDR) |
+		BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
 	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
-- 
2.19.1

[PATCH AUTOSEL 3.18 28/61] cpuidle: big.LITTLE: fix refcount leak

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 9456823c842f346c74265fcd98d008d87a7eb6f5 ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
bl_idle_init() doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/cpuidle-big_little.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
index fbc00a1d3c48..355dc3d9cb35 100644
--- a/drivers/cpuidle/cpuidle-big_little.c
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -175,6 +175,7 @@ static int __init bl_idle_init(void)
 {
 	int ret;
 	struct device_node *root = of_find_node_by_path("/");
+	const struct of_device_id *match_id;
 
 	if (!root)
 		return -ENODEV;
@@ -182,7 +183,11 @@ static int __init bl_idle_init(void)
 	/*
 	 * Initialize the driver just for a compliant set of machines
 	 */
-	if (!of_match_node(compatible_machine_match, root))
+	match_id = of_match_node(compatible_machine_match, root);
+
+	of_node_put(root);
+
+	if (!match_id)
 		return -ENODEV;
 	/*
 	 * For now the differentiation between little and big cores
-- 
2.19.1

[PATCH AUTOSEL 3.18 29/61] udf: Fix BUG on corrupted inode

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit d288d95842f1503414b7eebce3773bac3390457e ]

When inode is corrupted so that extent type is invalid, some functions
(such as udf_truncate_extents()) will just BUG. Check that extent type
is valid when loading the inode to memory.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 0c1ca254d616..00c2caff1743 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1366,6 +1366,12 @@ static int udf_read_inode(struct inode *inode, bool hidden_inode)
 
 	iinfo->i_alloc_type = le16_to_cpu(fe->icbTag.flags) &
 							ICBTAG_FLAG_AD_MASK;
+	if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_SHORT &&
+	    iinfo->i_alloc_type != ICBTAG_FLAG_AD_LONG &&
+	    iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
+		ret = -EIO;
+		goto out;
+	}
 	iinfo->i_unique = 0;
 	iinfo->i_lenEAttr = 0;
 	iinfo->i_lenExtents = 0;
-- 
2.19.1

[PATCH AUTOSEL 3.18 30/61] ARM: pxa: avoid section mismatch warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 88af3209aa0881aa5ffd99664b6080a4be5f24e5 ]

WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info()
The function littleton_init_lcd() references
the function __init pxa_set_fb_info().
This is often because littleton_init_lcd lacks a __init
annotation or the annotation of pxa_set_fb_info is wrong.

WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info()
The function zeus_register_ohci() references
the function __init pxa_set_ohci_info().
This is often because zeus_register_ohci lacks a __init
annotation or the annotation of pxa_set_ohci_info is wrong.

WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info()
The function cm_x300_init_u2d() references
the function __init pxa3xx_set_u2d_info().
This is often because cm_x300_init_u2d lacks a __init
annotation or the annotation of pxa3xx_set_u2d_info is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-pxa/cm-x300.c   | 2 +-
 arch/arm/mach-pxa/littleton.c | 2 +-
 arch/arm/mach-pxa/zeus.c      | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 4d3588d26c2a..8d44c3d7a750 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -542,7 +542,7 @@ static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
 	.exit		= cm_x300_u2d_exit,
 };
 
-static void cm_x300_init_u2d(void)
+static void __init cm_x300_init_u2d(void)
 {
 	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
 }
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 5d665588c7eb..05aa7071efd6 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -183,7 +183,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP,
 };
 
-static void littleton_init_lcd(void)
+static void __init littleton_init_lcd(void)
 {
 	pxa_set_fb_info(NULL, &littleton_lcd_info);
 }
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 205f9bf3821e..cfb2851dc519 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -556,7 +556,7 @@ static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
 };
 
-static void zeus_register_ohci(void)
+static void __init zeus_register_ohci(void)
 {
 	/* Port 2 is shared between host and client interface. */
 	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-- 
2.19.1

[PATCH AUTOSEL 3.18 31/61] ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit add6883619a9e3bf9658eaff1a547354131bbcd9 ]

eukrea-tlv320.c machine driver runs on non-DT platforms
and include <asm/mach-types.h> header file in order to be able
to use some machine_is_eukrea_xxx() macros.

Building it for ARM64 causes the following build error:

sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory

Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320
driver when ARM64 is selected.

This is needed in preparation for the i.MX8M support.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 081e406b3713..009d1893901b 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -219,7 +219,7 @@ config SND_SOC_PHYCORE_AC97
 
 config SND_SOC_EUKREA_TLV320
 	tristate "Eukrea TLV320"
-	depends on ARCH_MXC && I2C
+	depends on ARCH_MXC && !ARM64 && I2C
 	select SND_SOC_TLV320AIC23_I2C
 	select SND_SOC_IMX_AUDMUX
 	select SND_SOC_IMX_SSI
-- 
2.19.1

[PATCH AUTOSEL 3.18 32/61] ARM: mmp: fix timer_init calls

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 12d3a30db4a3b3df5fbadf5974b9cf50544a9950 ]

The change to passing the timer frequency as a function argument
was a good idea, but caused a build failure for one user that
was missed in the update:

arch/arm/mach-mmp/time.c: In function 'mmp_dt_init_timer':
arch/arm/mach-mmp/time.c:242:2: error: implicit declaration of function 'timer_init'; did you mean 'hrtimer_init'? [-Werror=implicit-function-declaration]

Change that as well to fix the build error, and rename the
function to put it into a proper namespace and make it clearer
what is actually going on.

I saw that the high 6500000 HZ frequency was previously only
set with CONFIG_MMP2, but is now also used with MMP (pxa910),
so I'm changing that back here. Please make sure that the
frequencies are all correct now.

Fixes: f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-mmp/common.h | 2 +-
 arch/arm/mach-mmp/mmp2.c   | 2 +-
 arch/arm/mach-mmp/pxa168.c | 2 +-
 arch/arm/mach-mmp/pxa910.c | 2 +-
 arch/arm/mach-mmp/time.c   | 4 ++--
 5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 69c7eec6d1e0..10779ab9d55f 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,7 +1,7 @@
 #include <linux/reboot.h>
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
-extern void timer_init(int irq, unsigned long rate);
+extern void mmp_timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 90a0d8114af2..c02a1f14aa02 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -133,7 +133,7 @@ void __init mmp2_timer_init(void)
 	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
 	__raw_writel(clk_rst, APBC_TIMERS);
 
-	timer_init(IRQ_MMP2_TIMER1, 6500000);
+	mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
 }
 
 /* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 5a616db7f392..94230041ec8f 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -78,7 +78,7 @@ void __init pxa168_timer_init(void)
 	/* 3.25MHz, bus/functional clock enabled, release reset */
 	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
-	timer_init(IRQ_PXA168_TIMER1, 6500000);
+	mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
 }
 
 void pxa168_clear_keypad_wakeup(void)
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index eb57ee196842..6b002763721d 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -114,7 +114,7 @@ void __init pxa910_timer_init(void)
 	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
-	timer_init(IRQ_PXA910_AP1_TIMER1);
+	mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
 }
 
 /* on-chip devices */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index b66ea443f154..2c59bb0f0e59 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -192,7 +192,7 @@ static struct irqaction timer_irq = {
 	.dev_id		= &ckevt,
 };
 
-void __init timer_init(int irq, unsigned long rate)
+void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
 
@@ -247,7 +247,7 @@ void __init mmp_dt_init_timer(void)
 		ret = -ENOMEM;
 		goto out;
 	}
-	timer_init(irq, rate);
+	mmp_timer_init(irq, rate);
 	return;
 out:
 	pr_err("Failed to get timer from device tree with error:%d\n", ret);
-- 
2.19.1

[PATCH AUTOSEL 3.18 33/61] memstick: Prevent memstick host from getting runtime suspended during card detection

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit e03e303edf1c63e6dd455ccd568c74e93ef3ba8c ]

We can use MEMSTICK_POWER_{ON,OFF} along with pm_runtime_{get,put}
helpers to let memstick host support runtime pm.

The rpm count may go down to zero before the memstick host powers on, so
the host can be runtime suspended.

So before doing card detection, increment the rpm count to avoid the
host gets runtime suspended. Balance the rpm count after card detection
is done.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memstick/core/memstick.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index a0547dbf9806..4d673a626db4 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pm_runtime.h>
 
 #define DRIVER_NAME "memstick"
 
@@ -436,6 +437,7 @@ static void memstick_check(struct work_struct *work)
 	struct memstick_dev *card;
 
 	dev_dbg(&host->dev, "memstick_check started\n");
+	pm_runtime_get_noresume(host->dev.parent);
 	mutex_lock(&host->lock);
 	if (!host->card) {
 		if (memstick_power_on(host))
@@ -479,6 +481,7 @@ static void memstick_check(struct work_struct *work)
 		host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
 
 	mutex_unlock(&host->lock);
+	pm_runtime_put(host->dev.parent);
 	dev_dbg(&host->dev, "memstick_check finished\n");
 }
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 34/61] tty: serial: samsung: Properly set flags in autoCTS mode

[Sasha Levin]

From: Beomho Seo <beomho.seo@samsung.com>

[ Upstream commit 31e933645742ee6719d37573a27cce0761dcf92b ]

Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
has changed the way the autoCTS mode is handled.

According to that change, serial drivers which enable H/W autoCTS mode must
set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 957992ceba0a..67cbc5647c36 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -817,11 +817,14 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
 
+	port->status &= ~UPSTAT_AUTOCTS;
+
 	umcon = rd_regl(port, S3C2410_UMCON);
 	if (termios->c_cflag & CRTSCTS) {
 		umcon |= S3C2410_UMCOM_AFC;
 		/* Disable RTS when RX FIFO contains 63 bytes */
 		umcon &= ~S3C2412_UMCON_AFC_8;
+		port->status = UPSTAT_AUTOCTS;
 	} else {
 		umcon &= ~S3C2410_UMCOM_AFC;
 	}
-- 
2.19.1

[PATCH AUTOSEL 3.18 35/61] arm64: KVM: Skip MMIO insn after emulation

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit 0d640732dbebed0f10f18526de21652931f0b2f2 ]

When we emulate an MMIO instruction, we advance the CPU state within
decode_hsr(), before emulating the instruction effects.

Having this logic in decode_hsr() is opaque, and advancing the state
before emulation is problematic. It gets in the way of applying
consistent single-step logic, and it prevents us from being able to fail
an MMIO instruction with a synchronous exception.

Clean this up by only advancing the CPU state *after* the effects of the
instruction are emulated.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kvm/mmio.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c
index 4cb5a93182e9..c215bb4423ac 100644
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -118,6 +118,12 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		*vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt) = data;
 	}
 
+	/*
+	 * The MMIO instruction is emulated and should not be re-executed
+	 * in the guest.
+	 */
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+
 	return 0;
 }
 
@@ -154,11 +160,6 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	vcpu->arch.mmio_decode.sign_extend = sign_extend;
 	vcpu->arch.mmio_decode.rt = rt;
 
-	/*
-	 * The MMIO instruction is emulated and should not be re-executed
-	 * in the guest.
-	 */
-	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 36/61] powerpc/uaccess: fix warning/error with access_ok()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]

With the following piece of code, the following compilation warning
is encountered:

	if (_IOC_DIR(ioc) != _IOC_NONE) {
		int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

		if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) {

drivers/platform/test/dev.c: In function 'my_ioctl':
drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable]
   int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

This patch fixes it by referencing 'type' in the macro allthough
doing nothing with it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/uaccess.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 46c486599645..1bb8cc3fbbf1 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -59,7 +59,7 @@
 #endif
 
 #define access_ok(type, addr, size)		\
-	(__chk_user_ptr(addr),			\
+	(__chk_user_ptr(addr), (void)(type),		\
 	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 3.18 37/61] xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit fa89a4593b927b3f59c3b69379f31d3b22272e4e ]

gcc warn this:

net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn:
 always true condition '(spi <= 4294967295) => (0-u32max <= u32max)'

'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX
because of wrap around. So the second forloop will never reach.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/xfrm6_tunnel.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 5743044cd660..56b72cada346 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -144,6 +144,9 @@ static u32 __xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr)
 		index = __xfrm6_tunnel_spi_check(net, spi);
 		if (index >= 0)
 			goto alloc_spi;
+
+		if (spi == XFRM6_TUNNEL_SPI_MAX)
+			break;
 	}
 	for (spi = XFRM6_TUNNEL_SPI_MIN; spi < xfrm6_tn->spi; spi++) {
 		index = __xfrm6_tunnel_spi_check(net, spi);
-- 
2.19.1

[PATCH AUTOSEL 3.18 38/61] drbd: narrow rcu_read_lock in drbd_sync_handshake

[Sasha Levin]

From: Roland Kammerer <roland.kammerer@linbit.com>

[ Upstream commit d29e89e34952a9ad02c77109c71a80043544296e ]

So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().

This included cases like:

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      drbd_bcast_event
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        genlmsg_new(GFP_NOIO) --> may sleep

drbd_sync_handshake (acquire the RCU lock)
  drbd_asb_recover_1p
    drbd_khelper
      notify_helper
        mutex_lock --> may sleep

While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.

Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_receiver.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 6960fb064731..4f18ec5198fb 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3125,7 +3125,7 @@ static enum drbd_conns drbd_sync_handshake(struct drbd_peer_device *peer_device,
 	enum drbd_conns rv = C_MASK;
 	enum drbd_disk_state mydisk;
 	struct net_conf *nc;
-	int hg, rule_nr, rr_conflict, tentative;
+	int hg, rule_nr, rr_conflict, tentative, always_asbp;
 
 	mydisk = device->state.disk;
 	if (mydisk == D_NEGOTIATING)
@@ -3167,8 +3167,12 @@ static enum drbd_conns drbd_sync_handshake(struct drbd_peer_device *peer_device,
 
 	rcu_read_lock();
 	nc = rcu_dereference(peer_device->connection->net_conf);
+	always_asbp = nc->always_asbp;
+	rr_conflict = nc->rr_conflict;
+	tentative = nc->tentative;
+	rcu_read_unlock();
 
-	if (hg == 100 || (hg == -100 && nc->always_asbp)) {
+	if (hg == 100 || (hg == -100 && always_asbp)) {
 		int pcount = (device->state.role == R_PRIMARY)
 			   + (peer_role == R_PRIMARY);
 		int forced = (hg == -100);
@@ -3207,9 +3211,6 @@ static enum drbd_conns drbd_sync_handshake(struct drbd_peer_device *peer_device,
 			     "Sync from %s node\n",
 			     (hg < 0) ? "peer" : "this");
 	}
-	rr_conflict = nc->rr_conflict;
-	tentative = nc->tentative;
-	rcu_read_unlock();
 
 	if (hg == -100) {
 		/* FIXME this log message is not correct if we end up here
-- 
2.19.1

[PATCH AUTOSEL 3.18 39/61] drbd: disconnect, if the wrong UUIDs are attached on a connected peer

[Sasha Levin]

From: Lars Ellenberg <lars.ellenberg@linbit.com>

[ Upstream commit b17b59602b6dcf8f97a7dc7bc489a48388d7063a ]

With "on-no-data-accessible suspend-io", DRBD requires the next attach
or connect to be to the very same data generation uuid tag it lost last.

If we first lost connection to the peer,
then later lost connection to our own disk,
we would usually refuse to re-connect to the peer,
because it presents the wrong data set.

However, if the peer first connects without a disk,
and then attached its disk, we accepted that same wrong data set,
which would be "unexpected" by any user of that DRBD
and cause "undefined results" (read: very likely data corruption).

The fix is to forcefully disconnect as soon as we notice that the peer
attached to the "wrong" dataset.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_receiver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 4f18ec5198fb..6b2b278bb2b7 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3889,7 +3889,7 @@ static int receive_uuids(struct drbd_connection *connection, struct packet_info
 	kfree(device->p_uuid);
 	device->p_uuid = p_uuid;
 
-	if (device->state.conn < C_CONNECTED &&
+	if ((device->state.conn < C_CONNECTED || device->state.pdsk == D_DISKLESS) &&
 	    device->state.disk < D_INCONSISTENT &&
 	    device->state.role == R_PRIMARY &&
 	    (device->ed_uuid & ~((u64)1)) != (p_uuid[UI_CURRENT] & ~((u64)1))) {
-- 
2.19.1

[PATCH AUTOSEL 3.18 40/61] drbd: skip spurious timeout (ping-timeo) when failing promote

[Sasha Levin]

From: Lars Ellenberg <lars.ellenberg@linbit.com>

[ Upstream commit 9848b6ddd8c92305252f94592c5e278574e7a6ac ]

If you try to promote a Secondary while connected to a Primary
and allow-two-primaries is NOT set, we will wait for "ping-timeout"
to give this node a chance to detect a dead primary,
in case the cluster manager noticed faster than we did.

But if we then are *still* connected to a Primary,
we fail (after an additional timeout of ping-timout).

This change skips the spurious second timeout.

Most people won't notice really,
since "ping-timeout" by default is half a second.

But in some installations, ping-timeout may be 10 or 20 seconds or more,
and spuriously delaying the error return becomes annoying.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_nl.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 1cd47df44bda..591d309b005e 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -632,14 +632,15 @@ drbd_set_role(struct drbd_device *const device, enum drbd_role new_role, int for
 		if (rv == SS_TWO_PRIMARIES) {
 			/* Maybe the peer is detected as dead very soon...
 			   retry at most once more in this case. */
-			int timeo;
-			rcu_read_lock();
-			nc = rcu_dereference(connection->net_conf);
-			timeo = nc ? (nc->ping_timeo + 1) * HZ / 10 : 1;
-			rcu_read_unlock();
-			schedule_timeout_interruptible(timeo);
-			if (try < max_tries)
+			if (try < max_tries) {
+				int timeo;
 				try = max_tries - 1;
+				rcu_read_lock();
+				nc = rcu_dereference(connection->net_conf);
+				timeo = nc ? (nc->ping_timeo + 1) * HZ / 10 : 1;
+				rcu_read_unlock();
+				schedule_timeout_interruptible(timeo);
+			}
 			continue;
 		}
 		if (rv < SS_SUCCESS) {
-- 
2.19.1

[PATCH AUTOSEL 3.18 41/61] drbd: Avoid Clang warning about pointless switch statment

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit a52c5a16cf19d8a85831bb1b915a221dd4ffae3c ]

There are several warnings from Clang about no case statement matching
the constant 0:

In file included from drivers/block/drbd/drbd_receiver.c:48:
In file included from drivers/block/drbd/drbd_int.h:48:
In file included from ./include/linux/drbd_genl_api.h:54:
In file included from ./include/linux/genl_magic_struct.h:236:
./include/linux/drbd_genl.h:321:1: warning: no case matching constant
switch condition '0'
GENL_struct(DRBD_NLA_HELPER, 24, drbd_helper_info,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/genl_magic_struct.h:220:10: note: expanded from macro
'GENL_struct'
        switch (0) {
                ^

Silence this warning by adding a 'case 0:' statement. Additionally,
adjust the alignment of the statements in the ct_assert_unique macro to
avoid a checkpatch warning.

This solution was originally sent by Arnd Bergmann with a default case
statement: https://lore.kernel.org/patchwork/patch/756723/

Link: https://github.com/ClangBuiltLinux/linux/issues/43
Suggested-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/genl_magic_struct.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/genl_magic_struct.h b/include/linux/genl_magic_struct.h
index eecd19b37001..250e9be65e74 100644
--- a/include/linux/genl_magic_struct.h
+++ b/include/linux/genl_magic_struct.h
@@ -185,6 +185,7 @@ static inline void ct_assert_unique_operations(void)
 {
 	switch (0) {
 #include GENL_MAGIC_INCLUDE_FILE
+	case 0:
 		;
 	}
 }
@@ -203,6 +204,7 @@ static inline void ct_assert_unique_top_level_attributes(void)
 {
 	switch (0) {
 #include GENL_MAGIC_INCLUDE_FILE
+	case 0:
 		;
 	}
 }
@@ -212,7 +214,8 @@ static inline void ct_assert_unique_top_level_attributes(void)
 static inline void ct_assert_unique_ ## s_name ## _attributes(void)	\
 {									\
 	switch (0) {							\
-		s_fields						\
+	s_fields							\
+	case 0:								\
 			;						\
 	}								\
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 42/61] video: clps711x-fb: release disp device node in probe()

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit fdac751355cd76e049f628afe6acb8ff4b1399f7 ]

clps711x_fb_probe() increments refcnt of disp device node by
of_parse_phandle() and leaves it undecremented on both
successful and error paths.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/clps711x-fb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/clps711x-fb.c b/drivers/video/fbdev/clps711x-fb.c
index 49a7bb4ef02f..dd8fd28d6132 100644
--- a/drivers/video/fbdev/clps711x-fb.c
+++ b/drivers/video/fbdev/clps711x-fb.c
@@ -287,14 +287,17 @@ static int clps711x_fb_probe(struct platform_device *pdev)
 	}
 
 	ret = of_get_fb_videomode(disp, &cfb->mode, OF_USE_NATIVE_MODE);
-	if (ret)
+	if (ret) {
+		of_node_put(disp);
 		goto out_fb_release;
+	}
 
 	of_property_read_u32(disp, "ac-prescale", &cfb->ac_prescale);
 	cfb->cmap_invert = of_property_read_bool(disp, "cmap-invert");
 
 	ret = of_property_read_u32(disp, "bits-per-pixel",
 				   &info->var.bits_per_pixel);
+	of_node_put(disp);
 	if (ret)
 		goto out_fb_release;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 43/61] fbdev: fbmem: behave better with small rotated displays and many CPUs

[Sasha Levin]

From: Peter Rosin <peda@axentia.se>

[ Upstream commit f75df8d4b4fabfad7e3cba2debfad12741c6fde7 ]

Blitting an image with "negative" offsets is not working since there
is no clipping. It hopefully just crashes. For the bootup logo, there
is protection so that blitting does not happen as the image is drawn
further and further to the right (ROTATE_UR) or further and further
down (ROTATE_CW). There is however no protection when drawing in the
opposite directions (ROTATE_UD and ROTATE_CCW).

Add back this protection.

The regression is 20-odd years old but the mindless warning-killing
mentality displayed in commit 34bdb666f4b2 ("fbdev: fbmem: remove
positive test on unsigned values") is also to blame, methinks.

Fixes: 448d479747b8 ("fbdev: fb_do_show_logo() updates")
Signed-off-by: Peter Rosin <peda@axentia.se>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Fabian Frederick <ffrederick@users.sourceforge.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
cc: Geoff Levand <geoff@infradead.org>
Cc: James Simmons <jsimmons@users.sf.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbmem.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 8a29ec5992fd..ea2bd6208a2f 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -433,7 +433,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
 			image->dx += image->width + 8;
 		}
 	} else if (rotate == FB_ROTATE_UD) {
-		for (x = 0; x < num; x++) {
+		u32 dx = image->dx;
+
+		for (x = 0; x < num && image->dx <= dx; x++) {
 			info->fbops->fb_imageblit(info, image);
 			image->dx -= image->width + 8;
 		}
@@ -445,7 +447,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
 			image->dy += image->height + 8;
 		}
 	} else if (rotate == FB_ROTATE_CCW) {
-		for (x = 0; x < num; x++) {
+		u32 dy = image->dy;
+
+		for (x = 0; x < num && image->dy <= dy; x++) {
 			info->fbops->fb_imageblit(info, image);
 			image->dy -= image->height + 8;
 		}
-- 
2.19.1

[PATCH AUTOSEL 3.18 44/61] igb: Fix an issue that PME is not enabled during runtime suspend

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ]

I210 ethernet card doesn't wakeup when a cable gets plugged. It's
because its PME is not set.

Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime
suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
calling pci_finish_runtime_suspend(), which enables the PCI PME.

To fix the issue, let's not to save PCI states when it's runtime
suspend, to let the PCI subsystem enables PME.

Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b73c896ed184..390d96ae4147 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7351,9 +7351,11 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	rtnl_unlock();
 
 #ifdef CONFIG_PM
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
+	if (!runtime) {
+		retval = pci_save_state(pdev);
+		if (retval)
+			return retval;
+	}
 #endif
 
 	status = rd32(E1000_STATUS);
-- 
2.19.1

[PATCH AUTOSEL 3.18 45/61] fbdev: fbcon: Fix unregister crash when more than one framebuffer

[Sasha Levin]

From: Noralf Trønnes <noralf@tronnes.org>

[ Upstream commit 2122b40580dd9d0620398739c773d07a7b7939d0 ]

When unregistering fbdev using unregister_framebuffer(), any bound
console will unbind automatically. This is working fine if this is the
only framebuffer, resulting in a switch to the dummy console. However if
there is a fb0 and I unregister fb1 having a bound console, I eventually
get a crash. The fastest way for me to trigger the crash is to do a
reboot, resulting in this splat:

[   76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c
[   76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm]
[   76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4
[   76.478933] Hardware name: BCM2835
[   76.478949] Backtrace:
[   76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24)
[   76.479022]  r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81
[   76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28)
[   76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c)
[   76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58)
[   76.479165]  r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84
[   76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c)
[   76.479222]  r6:d7666a00 r5:c0e918ee r4:dbc4e700
[   76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88)
[   76.479281]  r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00
[   76.479298]  r4:20000113
[   76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54)
[   76.479374]  r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc
[   76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230)
[   76.479435]  r4:c0e9192f r3:d758a340
[   76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c)
[   76.479495]  r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8
[   76.479513]  r4:d8a8fabc
[   76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184)
[   76.479570]  r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280
[   76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc)
[   76.479632]  r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002
[   76.479650]  r4:c0eb65ec
[   76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168)
[   76.479716]  r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0
[   76.479734]  r4:00000000
[   76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0)
[   76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48)
[   76.479823]  r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8
[   76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98)

The problem is in the console rebinding in fbcon_fb_unbind(). It uses the
virtual console index as the new framebuffer index to bind the console(s)
to. The correct way is to use the con2fb_map lookup table to find the
framebuffer index.

Fixes: cfafca8067c6 ("fbdev: fbcon: console unregistration from unregister_framebuffer")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/console/fbcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index eb976ee3a02f..614d3209d465 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -3018,7 +3018,7 @@ static int fbcon_fb_unbind(int idx)
 	for (i = first_fb_vc; i <= last_fb_vc; i++) {
 		if (con2fb_map[i] != idx &&
 		    con2fb_map[i] != -1) {
-			new_idx = i;
+			new_idx = con2fb_map[i];
 			break;
 		}
 	}
-- 
2.19.1

[PATCH AUTOSEL 3.18 46/61] NFS: nfs_compare_mount_options always compare auth flavors.

[Sasha Levin]

From: Chris Perl <cperl@janestreet.com>

[ Upstream commit 594d1644cd59447f4fceb592448d5cd09eb09b5e ]

This patch removes the check from nfs_compare_mount_options to see if a
`sec' option was passed for the current mount before comparing auth
flavors and instead just always compares auth flavors.

Consider the following scenario:

You have a server with the address 192.168.1.1 and two exports /export/a
and /export/b.  The first export supports `sys' and `krb5' security, the
second just `sys'.

Assume you start with no mounts from the server.

The following results in EIOs being returned as the kernel nfs client
incorrectly thinks it can share the underlying `struct nfs_server's:

$ mkdir /tmp/{a,b}
$ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a
$ sudo mount -t nfs -o vers=3          192.168.1.1:/export/b /tmp/b
$ df >/dev/null
df: ‘/tmp/b’: Input/output error

Signed-off-by: Chris Perl <cperl@janestreet.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/super.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index dbdc2d2f91cf..655ac3a196e4 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2376,8 +2376,7 @@ static int nfs_compare_mount_options(const struct super_block *s, const struct n
 		goto Ebusy;
 	if (a->acdirmax != b->acdirmax)
 		goto Ebusy;
-	if (b->auth_info.flavor_len > 0 &&
-	   clnt_a->cl_auth->au_flavor != clnt_b->cl_auth->au_flavor)
+	if (clnt_a->cl_auth->au_flavor != clnt_b->cl_auth->au_flavor)
 		goto Ebusy;
 	return 1;
 Ebusy:
-- 
2.19.1

[PATCH AUTOSEL 3.18 47/61] hwmon: (lm80) fix a missing check of the status of SMBus read

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit c9c63915519b1def7043b184680f33c24cd49d7b ]

If lm80_read_value() fails, it returns a negative number instead of the
correct read data. Therefore, we should avoid using the data if it
fails.

The fix checks if lm80_read_value() fails, and if so, returns with the
error number.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
[groeck: One variable for return values is enough]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/lm80.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 4bcd9b882948..47ddae6b7038 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -360,9 +360,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	struct i2c_client *client = data->client;
 	unsigned long min, val;
 	u8 reg;
-	int err = kstrtoul(buf, 10, &val);
-	if (err < 0)
-		return err;
+	int rv;
+
+	rv = kstrtoul(buf, 10, &val);
+	if (rv < 0)
+		return rv;
 
 	/* Save fan_min */
 	mutex_lock(&data->update_lock);
@@ -390,8 +392,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	reg = (lm80_read_value(client, LM80_REG_FANDIV) &
-	       ~(3 << (2 * (nr + 1)))) | (data->fan_div[nr] << (2 * (nr + 1)));
+	rv = lm80_read_value(client, LM80_REG_FANDIV);
+	if (rv < 0)
+		return rv;
+	reg = (rv & ~(3 << (2 * (nr + 1))))
+	    | (data->fan_div[nr] << (2 * (nr + 1)));
 	lm80_write_value(client, LM80_REG_FANDIV, reg);
 
 	/* Restore fan_min */
-- 
2.19.1

[PATCH AUTOSEL 3.18 48/61] hwmon: (lm80) fix a missing check of bus read in lm80 probe

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315 ]

In lm80_probe(), if lm80_read_value() fails, it returns a negative
error number which is stored to data->fan[f_min] and will be further
used. We should avoid using the data if the read fails.

The fix checks if lm80_read_value() fails, and if so, returns with the
error number.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/lm80.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 47ddae6b7038..cb6606a0470d 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -628,6 +628,7 @@ static int lm80_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
 	struct lm80_data *data;
+	int rv;
 
 	data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL);
 	if (!data)
@@ -640,8 +641,14 @@ static int lm80_probe(struct i2c_client *client,
 	lm80_init_client(client);
 
 	/* A few vars need to be filled upon startup */
-	data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
-	data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
+	rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+	if (rv < 0)
+		return rv;
+	data->fan[f_min][0] = rv;
+	rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
+	if (rv < 0)
+		return rv;
+	data->fan[f_min][1] = rv;
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, lm80_groups);
-- 
2.19.1

[PATCH AUTOSEL 3.18 49/61] crypto: ux500 - Use proper enum in cryp_set_dma_transfer

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 9d880c5945c748d8edcac30965f3349a602158c4 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/crypto/ux500/cryp/cryp_core.c:559:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                                direction, DMA_CTRL_ACK);
                                ^~~~~~~~~
drivers/crypto/ux500/cryp/cryp_core.c:583:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                                direction,
                                ^~~~~~~~~
2 warnings generated.

dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
Because we know the value of the dma_data_direction enum from the
switch statement, we can just use the proper value from
dma_transfer_direction so there is no more conversion.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ux500/cryp/cryp_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index e4cea7c45142..3897bfe41c8b 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -555,7 +555,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
 		desc = dmaengine_prep_slave_sg(channel,
 				ctx->device->dma.sg_src,
 				ctx->device->dma.sg_src_len,
-				direction, DMA_CTRL_ACK);
+				DMA_MEM_TO_DEV, DMA_CTRL_ACK);
 		break;
 
 	case DMA_FROM_DEVICE:
@@ -579,7 +579,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
 		desc = dmaengine_prep_slave_sg(channel,
 				ctx->device->dma.sg_dst,
 				ctx->device->dma.sg_dst_len,
-				direction,
+				DMA_DEV_TO_MEM,
 				DMA_CTRL_ACK |
 				DMA_PREP_INTERRUPT);
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 50/61] crypto: ux500 - Use proper enum in hash_set_dma_transfer

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 5ac93f808338f4dd465402e91869702eb87db241 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/crypto/ux500/hash/hash_core.c:169:4: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                        direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
                        ^~~~~~~~~
1 warning generated.

dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
We know that the only direction supported by this function is
DMA_TO_DEVICE because of the check at the top of this function so we can
just use the equivalent value from dma_transfer_direction.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ux500/hash/hash_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 3ff21c3e9ab2..48614b33e30e 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -181,7 +181,7 @@ static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
 		__func__);
 	desc = dmaengine_prep_slave_sg(channel,
 			ctx->device->dma.sg, ctx->device->dma.sg_len,
-			direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+			DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
 	if (!desc) {
 		dev_err(ctx->device->dev,
 			"%s: device_prep_slave_sg() failed!\n", __func__);
-- 
2.19.1

[PATCH AUTOSEL 3.18 51/61] cifs: check ntwrk_buf_start for NULL before dereferencing it

[Sasha Levin]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit 59a63e479ce36a3f24444c3a36efe82b78e4a8e0 ]

RHBZ: 1021460

There is an issue where when multiple threads open/close the same directory
ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize
later to oops with a NULL deref.

The real bug is why this happens and why this can become NULL for an
open cfile, which should not be allowed.
This patch tries to avoid a oops until the time when we fix the underlying
issue.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/readdir.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 707d8cf95348..116985335cc1 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -645,7 +645,14 @@ find_cifs_entry(const unsigned int xid, struct cifs_tcon *tcon, loff_t pos,
 		/* scan and find it */
 		int i;
 		char *cur_ent;
-		char *end_of_smb = cfile->srch_inf.ntwrk_buf_start +
+		char *end_of_smb;
+
+		if (cfile->srch_inf.ntwrk_buf_start == NULL) {
+			cifs_dbg(VFS, "ntwrk_buf_start is NULL during readdir\n");
+			return -EIO;
+		}
+
+		end_of_smb = cfile->srch_inf.ntwrk_buf_start +
 			server->ops->calc_smb_size(
 					cfile->srch_inf.ntwrk_buf_start);
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 52/61] um: Avoid marking pages with "changed protection"

[Sasha Levin]

From: Anton Ivanov <anton.ivanov@cambridgegreys.com>

[ Upstream commit 8892d8545f2d0342b9c550defbfb165db237044b ]

Changing protection is a very high cost operation in UML
because in addition to an extra syscall it also interrupts
mmap merge sequences generated by the tlb.

While the condition is not particularly common it is worth
avoiding.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/include/asm/pgtable.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index bf974f712af7..e75fa226f08a 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -210,12 +210,17 @@ static inline pte_t pte_mkold(pte_t pte)
 
 static inline pte_t pte_wrprotect(pte_t pte)
 { 
-	pte_clear_bits(pte, _PAGE_RW);
+	if (likely(pte_get_bits(pte, _PAGE_RW)))
+		pte_clear_bits(pte, _PAGE_RW);
+	else
+		return pte;
 	return(pte_mknewprot(pte)); 
 }
 
 static inline pte_t pte_mkread(pte_t pte)
 { 
+	if (unlikely(pte_get_bits(pte, _PAGE_USER)))
+		return pte;
 	pte_set_bits(pte, _PAGE_USER);
 	return(pte_mknewprot(pte)); 
 }
@@ -234,6 +239,8 @@ static inline pte_t pte_mkyoung(pte_t pte)
 
 static inline pte_t pte_mkwrite(pte_t pte)	
 {
+	if (unlikely(pte_get_bits(pte,  _PAGE_RW)))
+		return pte;
 	pte_set_bits(pte, _PAGE_RW);
 	return(pte_mknewprot(pte)); 
 }
-- 
2.19.1

[PATCH AUTOSEL 3.18 53/61] niu: fix missing checks of niu_pci_eeprom_read

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 26fd962bde0b15e54234fe762d86bc0349df1de4 ]

niu_pci_eeprom_read() may fail, so we should check its return value
before using the read data.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/niu.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 68738aa8e218..e87bded39781 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8131,6 +8131,8 @@ static int niu_pci_vpd_scan_props(struct niu *np, u32 start, u32 end)
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
+		if (prop_len < 0)
+			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8175,8 +8177,12 @@ static int niu_pci_vpd_scan_props(struct niu *np, u32 start, u32 end)
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++)
-				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
+			for (i = 0; i < prop_len; i++) {
+				err = niu_pci_eeprom_read(np, off + i);
+				if (err >= 0)
+					*prop_buf = err;
+				++prop_buf;
+			}
 		}
 
 		start += len;
-- 
2.19.1

[PATCH AUTOSEL 3.18 54/61] scripts/decode_stacktrace: only strip base path when a prefix of the path

[Sasha Levin]

From: Marc Zyngier <marc.zyngier@arm.com>

[ Upstream commit 67a28de47faa83585dd644bd4c31e5a1d9346c50 ]

Running something like:

	decodecode vmlinux .

leads to interested results where not only the leading "." gets stripped
from the displayed paths, but also anywhere in the string, displaying
something like:

	kvm_vcpu_check_block (arch/arm64/kvm/virt/kvm/kvm_mainc:2141)

which doesn't help further processing.

Fix it by only stripping the base path if it is a prefix of the path.

Link: http://lkml.kernel.org/r/20181210174659.31054-3-marc.zyngier@arm.com
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/decode_stacktrace.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
index 515c4c00e957..aa4b57abd1b5 100755
--- a/scripts/decode_stacktrace.sh
+++ b/scripts/decode_stacktrace.sh
@@ -61,7 +61,7 @@ parse_symbol() {
 	fi
 
 	# Strip out the base of the path
-	code=${code//$basepath/""}
+	code=${code//^$basepath/""}
 
 	# In the case of inlines, move everything to same line
 	code=${code//$'\n'/' '}
-- 
2.19.1

[PATCH AUTOSEL 3.18 55/61] ocfs2: don't clear bh uptodate for block read

[Sasha Levin]

From: Junxiao Bi <junxiao.bi@oracle.com>

[ Upstream commit 70306d9dce75abde855cefaf32b3f71eed8602a3 ]

For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag
and submit the io, second wait io done, last check whether bh uptodate, if
not return io error.

If two sync io for the same bh were issued, it could be the first io done
and set uptodate flag, but just before check that flag, the second io came
in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io
will return IO error.

Indeed it's not necessary to clear uptodate flag, as the io end handler
end_buffer_read_sync() will set or clear it based on io succeed or failed.

The following message was found from a nfs server but the underlying
storage returned no error.

[4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5
[4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5
[4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5
[4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5
[4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5

Same issue in non sync read ocfs2_read_blocks(), fixed it as well.

Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/buffer_head_io.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index d6eab71abe1f..30d65259bc61 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -146,7 +146,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 			BUG();
 		}
 
-		clear_buffer_uptodate(bh);
 		get_bh(bh); /* for end_buffer_read_sync() */
 		bh->b_end_io = end_buffer_read_sync;
 		submit_bh(READ, bh);
@@ -300,7 +299,6 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 				continue;
 			}
 
-			clear_buffer_uptodate(bh);
 			get_bh(bh); /* for end_buffer_read_sync() */
 			if (validate)
 				set_buffer_needs_validate(bh);
-- 
2.19.1

[PATCH AUTOSEL 3.18 56/61] isdn: hisax: hfc_pci: Fix a possible concurrency use-after-free bug in HFCPCI_l1hw()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 7418e6520f22a2e35815122fa5a53d5bbfa2c10f ]

In drivers/isdn/hisax/hfc_pci.c, the functions hfcpci_interrupt() and
HFCPCI_l1hw() may be concurrently executed.

HFCPCI_l1hw()
  line 1173: if (!cs->tx_skb)

hfcpci_interrupt()
  line 942: spin_lock_irqsave();
  line 1066: dev_kfree_skb_irq(cs->tx_skb);

Thus, a possible concurrency use-after-free bug may occur
in HFCPCI_l1hw().

To fix these bugs, the calls to spin_lock_irqsave() and
spin_unlock_irqrestore() are added in HFCPCI_l1hw(), to protect the
access to cs->tx_skb.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hisax/hfc_pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 4a4825528188..3d58437638c8 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1169,11 +1169,13 @@ HFCPCI_l1hw(struct PStack *st, int pr, void *arg)
 		if (cs->debug & L1_DEB_LAPD)
 			debugl1(cs, "-> PH_REQUEST_PULL");
 #endif
+		spin_lock_irqsave(&cs->lock, flags);
 		if (!cs->tx_skb) {
 			test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
 			st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
 		} else
 			test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
+		spin_unlock_irqrestore(&cs->lock, flags);
 		break;
 	case (HW_RESET | REQUEST):
 		spin_lock_irqsave(&cs->lock, flags);
-- 
2.19.1

[PATCH AUTOSEL 3.18 57/61] gdrom: fix a memory leak bug

[Sasha Levin]

From: Wenwen Wang <wang6495@umn.edu>

[ Upstream commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017 ]

In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through
kzalloc() and is used to hold the information of the gdrom device. To
register and unregister the device, the pointer 'gd.cd_info' is passed to
the functions register_cdrom() and unregister_cdrom(), respectively.
However, this buffer is not freed after it is used, which can cause a
memory leak bug.

This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the
above issue.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cdrom/gdrom.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index e2808fefbb78..1852d19d0d7b 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -882,6 +882,7 @@ static void __exit exit_gdrom(void)
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
 	kfree(gd.toc);
+	kfree(gd.cd_info);
 }
 
 module_init(init_gdrom);
-- 
2.19.1

[PATCH AUTOSEL 3.18 58/61] block/swim3: Fix -EBUSY error when re-opening device after unmount

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]

When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/swim3.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 523ee8fd4c15..eaf1336623aa 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1027,7 +1027,11 @@ static void floppy_release(struct gendisk *disk, fmode_t mode)
 	struct swim3 __iomem *sw = fs->swim3;
 
 	mutex_lock(&swim3_mutex);
-	if (fs->ref_count > 0 && --fs->ref_count == 0) {
+	if (fs->ref_count > 0)
+		--fs->ref_count;
+	else if (fs->ref_count == -1)
+		fs->ref_count = 0;
+	if (fs->ref_count == 0) {
 		swim3_action(fs, MOTOR_OFF);
 		out_8(&sw->control_bic, 0xff);
 		swim3_select(fs, RELAX);
-- 
2.19.1

[PATCH AUTOSEL 3.18 59/61] kernel/hung_task.c: break RCU locks based on jiffies

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 304ae42739b108305f8d7b3eb3c1aec7c2b643a9 ]

check_hung_uninterruptible_tasks() is currently calling rcu_lock_break()
for every 1024 threads.  But check_hung_task() is very slow if printk()
was called, and is very fast otherwise.

If many threads within some 1024 threads called printk(), the RCU grace
period might be extended enough to trigger RCU stall warnings.
Therefore, calling rcu_lock_break() for every some fixed jiffies will be
safer.

Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/hung_task.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index 06db12434d72..eda60beeac7d 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -30,7 +30,7 @@ int __read_mostly sysctl_hung_task_check_count = PID_MAX_LIMIT;
  * is disabled during the critical section. It also controls the size of
  * the RCU grace period. So it needs to be upper-bound.
  */
-#define HUNG_TASK_BATCHING 1024
+#define HUNG_TASK_LOCK_BREAK (HZ / 10)
 
 /*
  * Zero means infinite timeout - no checking done:
@@ -158,7 +158,7 @@ static bool rcu_lock_break(struct task_struct *g, struct task_struct *t)
 static void check_hung_uninterruptible_tasks(unsigned long timeout)
 {
 	int max_count = sysctl_hung_task_check_count;
-	int batch_count = HUNG_TASK_BATCHING;
+	unsigned long last_break = jiffies;
 	struct task_struct *g, *t;
 
 	/*
@@ -172,10 +172,10 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout)
 	do_each_thread(g, t) {
 		if (!max_count--)
 			goto unlock;
-		if (!--batch_count) {
-			batch_count = HUNG_TASK_BATCHING;
+		if (time_after(jiffies, last_break + HUNG_TASK_LOCK_BREAK)) {
 			if (!rcu_lock_break(g, t))
 				goto unlock;
+			last_break = jiffies;
 		}
 		/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
 		if (t->state == TASK_UNINTERRUPTIBLE)
-- 
2.19.1

[PATCH AUTOSEL 3.18 60/61] fs/epoll: drop ovflist branch prediction

[Sasha Levin]

From: Davidlohr Bueso <dave@stgolabs.net>

[ Upstream commit 76699a67f3041ff4c7af6d6ee9be2bfbf1ffb671 ]

The ep->ovflist is a secondary ready-list to temporarily store events
that might occur when doing sproc without holding the ep->wq.lock.  This
accounts for every time we check for ready events and also send events
back to userspace; both callbacks, particularly the latter because of
copy_to_user, can account for a non-trivial time.

As such, the unlikely() check to see if the pointer is being used, seems
both misleading and sub-optimal.  In fact, we go to an awful lot of
trouble to sync both lists, and populating the ovflist is far from an
uncommon scenario.

For example, profiling a concurrent epoll_wait(2) benchmark, with
CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33%
incorrect rate was seen; and when incrementally increasing the number of
epoll instances (which is used, for example for multiple queuing load
balancing models), up to a 90% incorrect rate was seen.

Similarly, by deleting the prediction, 3% throughput boost was seen
across incremental threads.

Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/eventpoll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 2b5285c40b40..8e50ef617d85 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1037,7 +1037,7 @@ static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *k
 	 * semantics). All the events that happen during that period of time are
 	 * chained in ep->ovflist and requeued later on.
 	 */
-	if (unlikely(ep->ovflist != EP_UNACTIVE_PTR)) {
+	if (ep->ovflist != EP_UNACTIVE_PTR) {
 		if (epi->next == EP_UNACTIVE_PTR) {
 			epi->next = ep->ovflist;
 			ep->ovflist = epi;
-- 
2.19.1

[PATCH AUTOSEL 3.18 61/61] exec: load_script: don't blindly truncate shebang string

[Sasha Levin]

From: Oleg Nesterov <oleg@redhat.com>

[ Upstream commit 8099b047ecc431518b9bb6bdbba3549bbecdc343 ]

load_script() simply truncates bprm->buf and this is very wrong if the
length of shebang string exceeds BINPRM_BUF_SIZE-2.  This can silently
truncate i_arg or (worse) we can execute the wrong binary if buf[2:126]
happens to be the valid executable path.

Change load_script() to return ENOEXEC if it can't find '\n' or zero in
bprm->buf.  Note that '\0' can come from either
prepare_binprm()->memset() or from kernel_read(), we do not care.

Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Woodard <woodard@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/binfmt_script.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/binfmt_script.c b/fs/binfmt_script.c
index 5027a3e14922..f62e45df2d38 100644
--- a/fs/binfmt_script.c
+++ b/fs/binfmt_script.c
@@ -33,10 +33,14 @@ static int load_script(struct linux_binprm *bprm)
 	fput(bprm->file);
 	bprm->file = NULL;
 
-	bprm->buf[BINPRM_BUF_SIZE - 1] = '\0';
-	if ((cp = strchr(bprm->buf, '\n')) == NULL)
-		cp = bprm->buf+BINPRM_BUF_SIZE-1;
+	for (cp = bprm->buf+2;; cp++) {
+		if (cp >= bprm->buf + BINPRM_BUF_SIZE)
+			return -ENOEXEC;
+		if (!*cp || (*cp == '\n'))
+			break;
+	}
 	*cp = '\0';
+
 	while (cp > bprm->buf) {
 		cp--;
 		if ((*cp == ' ') || (*cp == '\t'))
-- 
2.19.1