[PATCH v6 0/3] Stingray thermal driver support

[PATCH v6 0/3] Stingray thermal driver support

[Srinath Mannam]

These patches adds the stingray thermal driver and its
corresponding DT nodes with documentation.

Changes from v5
  - Addressed Eduardo Valentin comments.

Changes from v4
  - Addressed Rob Herring comments on DT parameters and
    thermal driver architecture.
  - Removed brcm,max-crit-temp DT parameter
  - Changed driver to thermal sensor registration model.
  - Added trip DT properties.

Changes from v3
  - Addressed Daniel lezcano comments.
  - Elaborated commit description of thermal driver patch.
  - Added brcm,max-crit-temp DT parameter.

Changes from v2:
  - All stingray TMON DT nodes are combine together into single.
    Temperature registers are combined into one mem resource.
    brcm,tmon-mask parameter has available TMONs mask value.
  - All available TMONs are initialized together in single
    instance of driver probe call.

Changes from v1:
  - Fixed auto build sparce warning.

Pramod Kumar (3):
  dt-bindings: thermal: Add binding document for SR thermal
  thermal: broadcom: Add Stingray thermal driver
  arm64: dts: stingray: Add Stingray Thermal DT support.

 .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
 drivers/thermal/Kconfig                            |   3 +-
 drivers/thermal/broadcom/Kconfig                   |   9 ++
 drivers/thermal/broadcom/Makefile                  |   1 +
 drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
 6 files changed, 328 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
 create mode 100644 drivers/thermal/broadcom/sr-thermal.c

-- 
2.7.4

[PATCH v6 1/3] dt-bindings: thermal: Add binding document for SR thermal

[Srinath Mannam]

From: Pramod Kumar <pramod.kumar@broadcom.com>

Add binding document for supported thermal implementation
in Stingray.

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../bindings/thermal/brcm,sr-thermal.txt           | 105 +++++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
new file mode 100644
index 0000000..3ab3302
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
@@ -0,0 +1,105 @@
+* Broadcom Stingray Thermal
+
+This binding describes thermal sensors that is part of Stingray SoCs.
+
+Required properties:
+- compatible : Must be "brcm,sr-thermal"
+- reg : Memory where tmon data will be available.
+- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
+                  Each bit represents single TMON source.
+- #thermal-sensor-cells : Thermal sensor phandler
+- polling-delay: Max number of milliseconds to wait between polls.
+- thermal-sensors: A list of thermal sensor phandles and specifier.
+                   specifier value is tmon ID and it should be
+                   in correspond with brcm,tmon-mask.
+- temperature: trip temperature threshold in millicelsius.
+
+Example:
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x8f100000 0x100>;
+
+		tmon: tmon@0 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x0 0x40>;
+			brcm,tmon-mask = <0x3f>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		ihost0_thermal: ihost0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 0>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost1_thermal: ihost1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 1>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost2_thermal: ihost2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 2>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost3_thermal: ihost3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 3>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		crmu_thermal: crmu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 4>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		nitro_thermal: nitro-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 5>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
-- 
2.7.4

[PATCH v6 2/3] thermal: broadcom: Add Stingray thermal driver

[Srinath Mannam]

From: Pramod Kumar <pramod.kumar@broadcom.com>

Stingray SoC has six temperature sensor and those are
configured, controlled and accessed to read temperature
and update in DDR memory using m0 firmware.
All six sensors has been given 4 bytes of memory in DDR
to write temperature in millivolts.

This thermal driver read temperature values from DDR
because no direct access to sensors.
Like this all temparature sensors are monitored and
trips at critical temperature.

If driver can't handle thermal runaways because of
any unknown reason, then firmware in m0 Processor
will handle.

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
---
 drivers/thermal/Kconfig               |   3 +-
 drivers/thermal/broadcom/Kconfig      |   9 +++
 drivers/thermal/broadcom/Makefile     |   1 +
 drivers/thermal/broadcom/sr-thermal.c | 122 ++++++++++++++++++++++++++++++++++
 4 files changed, 134 insertions(+), 1 deletion(-)
 create mode 100644 drivers/thermal/broadcom/sr-thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5422523..60e884e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -416,7 +416,8 @@ config MTK_THERMAL
 	  controller present in Mediatek SoCs
 
 menu "Broadcom thermal drivers"
-depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM_IPROC || \
+		COMPILE_TEST
 source "drivers/thermal/broadcom/Kconfig"
 endmenu
 
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index c106a15..dc9a9bd 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -22,3 +22,12 @@ config BCM_NS_THERMAL
 	  BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
 	  Management Unit) block with a thermal sensor that allows checking CPU
 	  temperature.
+
+config BCM_SR_THERMAL
+	tristate "Stingray thermal driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	default ARCH_BCM_IPROC
+	help
+	  Support for the Stingray family of SoCs. Its different blocks like
+	  iHost, CRMU and NITRO has thermal sensor that allows checking its
+	  temperature.
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index fae10ec..79df69e 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_BCM2835_THERMAL)		+= bcm2835_thermal.o
 obj-$(CONFIG_BRCMSTB_THERMAL)		+= brcmstb_thermal.o
 obj-$(CONFIG_BCM_NS_THERMAL)		+= ns-thermal.o
+obj-$(CONFIG_BCM_SR_THERMAL)		+= sr-thermal.o
diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c
new file mode 100644
index 0000000..fcb0cc2
--- /dev/null
+++ b/drivers/thermal/broadcom/sr-thermal.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Broadcom
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+/*
+ * In stingray thermal IO memory,
+ * Total Number of available TMONs MASK is at offset 0
+ * temperature registers BASE is at 4 byte offset.
+ * Each TMON temperature register size is 4.
+ */
+#define SR_TMON_TEMP_BASE(id)   ((id) * 0x4)
+
+#define SR_TMON_MAX_LIST        6
+
+struct sr_tmon {
+	struct thermal_zone_device *tz;
+	unsigned int crit_temp;
+	unsigned int tmon_id;
+	struct sr_thermal *priv;
+};
+
+struct sr_thermal {
+	void __iomem *regs;
+	unsigned int max_crit_temp;
+	struct sr_tmon tmon[SR_TMON_MAX_LIST];
+};
+
+static int sr_get_temp(void *data, int *temp)
+{
+	struct sr_tmon *tmon = data;
+	struct sr_thermal *sr_thermal = tmon->priv;
+
+	*temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops sr_tz_ops = {
+	.get_temp = sr_get_temp,
+};
+
+static int sr_thermal_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sr_thermal *sr_thermal;
+	struct sr_tmon *tmon;
+	struct resource *res;
+	uint32_t sr_tmon_list = 0;
+	unsigned int i;
+	int ret;
+
+	sr_thermal = devm_kzalloc(dev, sizeof(*sr_thermal), GFP_KERNEL);
+	if (!sr_thermal)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start,
+							 resource_size(res),
+							 MEMREMAP_WB);
+	if (IS_ERR(sr_thermal->regs)) {
+		dev_err(dev, "failed to get io address\n");
+		return PTR_ERR(sr_thermal->regs);
+	}
+
+	ret = device_property_read_u32(dev, "brcm,tmon-mask", &sr_tmon_list);
+	if (ret)
+		return ret;
+
+	tmon = sr_thermal->tmon;
+	for (i = 0; i < SR_TMON_MAX_LIST; i++, tmon++) {
+
+		if (!(sr_tmon_list & BIT(i)))
+			continue;
+
+		/* Flush temperature registers */
+		writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
+		tmon->tmon_id = i;
+		tmon->priv = sr_thermal;
+		tmon->tz = devm_thermal_zone_of_sensor_register(dev, i, tmon,
+								&sr_tz_ops);
+		if (IS_ERR(tmon->tz))
+			return PTR_ERR(tmon->tz);
+
+		dev_dbg(dev, "thermal sensor %d registered\n", i);
+	}
+	platform_set_drvdata(pdev, sr_thermal);
+
+	return 0;
+}
+
+static const struct of_device_id sr_thermal_of_match[] = {
+	{ .compatible = "brcm,sr-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sr_thermal_of_match);
+
+static const struct acpi_device_id sr_thermal_acpi_ids[] = {
+	{ .id = "BRCM0500" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, sr_thermal_acpi_ids);
+
+static struct platform_driver sr_thermal_driver = {
+	.probe		= sr_thermal_probe,
+	.driver = {
+		.name = "sr-thermal",
+		.of_match_table = sr_thermal_of_match,
+		.acpi_match_table = ACPI_PTR(sr_thermal_acpi_ids),
+	},
+};
+module_platform_driver(sr_thermal_driver);
+
+MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
+MODULE_DESCRIPTION("Stingray thermal driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH v6 3/3] arm64: dts: stingray: Add Stingray Thermal DT support.

[Srinath Mannam]

From: Pramod Kumar <pramod.kumar@broadcom.com>

Add DT nodes for thermal zones memory base address
to read temperature.

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 ++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index cfeaa85..4fd06ed 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -612,4 +612,93 @@
 			status = "disabled";
 		};
 	};
+
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x8f100000 0x100>;
+
+		tmon: tmon@0 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x0 0x40>;
+			brcm,tmon-mask = <0x3f>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		ihost0_thermal: ihost0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 0>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost1_thermal: ihost1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 1>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost2_thermal: ihost2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 2>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost3_thermal: ihost3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 3>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		crmu_thermal: crmu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 4>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		nitro_thermal: nitro-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 5>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
-- 
2.7.4

Re: [PATCH v6 1/3] dt-bindings: thermal: Add binding document for SR thermal

[Rob Herring]

On Thu,  3 Jan 2019 14:25:32 +0530, Srinath Mannam wrote:
> From: Pramod Kumar <pramod.kumar@broadcom.com>
> 
> Add binding document for supported thermal implementation
> in Stingray.
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 +++++++++++++++++++++
>  1 file changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> 

Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.

Re: [PATCH v6 1/3] dt-bindings: thermal: Add binding document for SR thermal

[Srinath Mannam]

Hi Rob,

Thank you for the note. I will take care from next time onward.

Thanks & Regards,
Srinath.

On Thu, Jan 3, 2019 at 10:31 PM Rob Herring <robh@kernel.org> wrote:
>
> On Thu,  3 Jan 2019 14:25:32 +0530, Srinath Mannam wrote:
> > From: Pramod Kumar <pramod.kumar@broadcom.com>
> >
> > Add binding document for supported thermal implementation
> > in Stingray.
> >
> > Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> > Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> > Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> > Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> > ---
> >  .../bindings/thermal/brcm,sr-thermal.txt           | 105 +++++++++++++++++++++
> >  1 file changed, 105 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> >
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.

Re: [PATCH v6 0/3] Stingray thermal driver support

[Ray Jui]

Hi Zhang/Eduardo,

Can this patch series be merged? It looks like Srinath has addressed all
review comments?

The following tag should be added to the binding document patch:

Reviewed-by: Rob Herring <robh@kernel.org>

Thanks,

Ray

On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.
> 
> Changes from v5
>   - Addressed Eduardo Valentin comments.
> 
> Changes from v4
>   - Addressed Rob Herring comments on DT parameters and
>     thermal driver architecture.
>   - Removed brcm,max-crit-temp DT parameter
>   - Changed driver to thermal sensor registration model.
>   - Added trip DT properties.
> 
> Changes from v3
>   - Addressed Daniel lezcano comments.
>   - Elaborated commit description of thermal driver patch.
>   - Added brcm,max-crit-temp DT parameter.
> 
> Changes from v2:
>   - All stingray TMON DT nodes are combine together into single.
>     Temperature registers are combined into one mem resource.
>     brcm,tmon-mask parameter has available TMONs mask value.
>   - All available TMONs are initialized together in single
>     instance of driver probe call.
> 
> Changes from v1:
>   - Fixed auto build sparce warning.
> 
> Pramod Kumar (3):
>   dt-bindings: thermal: Add binding document for SR thermal
>   thermal: broadcom: Add Stingray thermal driver
>   arm64: dts: stingray: Add Stingray Thermal DT support.
> 
>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
>  drivers/thermal/Kconfig                            |   3 +-
>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
>  6 files changed, 328 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> 

Re: [PATCH v6 0/3] Stingray thermal driver support

[Eduardo Valentin]

Hello,

On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
> Hi Zhang/Eduardo,
> 
> Can this patch series be merged? It looks like Srinath has addressed all
> review comments?

I will take a look. Side note, thermal patches are reviewed on
linux-pm@vger.kernel.org. Copying that list it does help because that
is how the patches get assigned in patchwork.kernel.org.

> 
> The following tag should be added to the binding document patch:
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> Thanks,
> 
> Ray
> 
> On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> > These patches adds the stingray thermal driver and its
> > corresponding DT nodes with documentation.
> > 
> > Changes from v5
> >   - Addressed Eduardo Valentin comments.
> > 
> > Changes from v4
> >   - Addressed Rob Herring comments on DT parameters and
> >     thermal driver architecture.
> >   - Removed brcm,max-crit-temp DT parameter
> >   - Changed driver to thermal sensor registration model.
> >   - Added trip DT properties.
> > 
> > Changes from v3
> >   - Addressed Daniel lezcano comments.
> >   - Elaborated commit description of thermal driver patch.
> >   - Added brcm,max-crit-temp DT parameter.
> > 
> > Changes from v2:
> >   - All stingray TMON DT nodes are combine together into single.
> >     Temperature registers are combined into one mem resource.
> >     brcm,tmon-mask parameter has available TMONs mask value.
> >   - All available TMONs are initialized together in single
> >     instance of driver probe call.
> > 
> > Changes from v1:
> >   - Fixed auto build sparce warning.
> > 
> > Pramod Kumar (3):
> >   dt-bindings: thermal: Add binding document for SR thermal
> >   thermal: broadcom: Add Stingray thermal driver
> >   arm64: dts: stingray: Add Stingray Thermal DT support.
> > 
> >  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
> >  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
> >  drivers/thermal/Kconfig                            |   3 +-
> >  drivers/thermal/broadcom/Kconfig                   |   9 ++
> >  drivers/thermal/broadcom/Makefile                  |   1 +
> >  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
> >  6 files changed, 328 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> >  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> > 

Re: [PATCH v6 0/3] Stingray thermal driver support

[Srinath Mannam]

Hi Eduardo,

Could you please provide your review comments?

Regards,
Srinath.

On Wed, Feb 6, 2019 at 5:28 AM Eduardo Valentin <edubezval@gmail.com> wrote:
>
> Hello,
>
> On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
> > Hi Zhang/Eduardo,
> >
> > Can this patch series be merged? It looks like Srinath has addressed all
> > review comments?
>
> I will take a look. Side note, thermal patches are reviewed on
> linux-pm@vger.kernel.org. Copying that list it does help because that
> is how the patches get assigned in patchwork.kernel.org.
>
> >
> > The following tag should be added to the binding document patch:
> >
> > Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > Thanks,
> >
> > Ray
> >
> > On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> > > These patches adds the stingray thermal driver and its
> > > corresponding DT nodes with documentation.
> > >
> > > Changes from v5
> > >   - Addressed Eduardo Valentin comments.
> > >
> > > Changes from v4
> > >   - Addressed Rob Herring comments on DT parameters and
> > >     thermal driver architecture.
> > >   - Removed brcm,max-crit-temp DT parameter
> > >   - Changed driver to thermal sensor registration model.
> > >   - Added trip DT properties.
> > >
> > > Changes from v3
> > >   - Addressed Daniel lezcano comments.
> > >   - Elaborated commit description of thermal driver patch.
> > >   - Added brcm,max-crit-temp DT parameter.
> > >
> > > Changes from v2:
> > >   - All stingray TMON DT nodes are combine together into single.
> > >     Temperature registers are combined into one mem resource.
> > >     brcm,tmon-mask parameter has available TMONs mask value.
> > >   - All available TMONs are initialized together in single
> > >     instance of driver probe call.
> > >
> > > Changes from v1:
> > >   - Fixed auto build sparce warning.
> > >
> > > Pramod Kumar (3):
> > >   dt-bindings: thermal: Add binding document for SR thermal
> > >   thermal: broadcom: Add Stingray thermal driver
> > >   arm64: dts: stingray: Add Stingray Thermal DT support.
> > >
> > >  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
> > >  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
> > >  drivers/thermal/Kconfig                            |   3 +-
> > >  drivers/thermal/broadcom/Kconfig                   |   9 ++
> > >  drivers/thermal/broadcom/Makefile                  |   1 +
> > >  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
> > >  6 files changed, 328 insertions(+), 1 deletion(-)
> > >  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> > >  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> > >

Re: [PATCH v6 3/3] arm64: dts: stingray: Add Stingray Thermal DT support.

[Florian Fainelli]

On Thu,  3 Jan 2019 14:25:34 +0530, Srinath Mannam <srinath.mannam@broadcom.com> wrote:
> From: Pramod Kumar <pramod.kumar@broadcom.com>
> 
> Add DT nodes for thermal zones memory base address
> to read temperature.
> 
> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---

Applied to devicetree-arm64/next, thanks!
--
Florian

Re: [PATCH v6 0/3] Stingray thermal driver support

[Florian Fainelli]

On 2/14/19 8:20 PM, Srinath Mannam wrote:
> Hi Eduardo,
> 
> Could you please provide your review comments?

So it sounds like this driver was included in a pull request to Linus
for 5.1 [1], although I did not see a response to that patch series,
which would have helped synchronize the Device Tree changes and send
them to Linus as well... I will see if the ARM SoC folks will accept a
late request, most likely they would not.

Eduardo, can you include replies to patches when you applies those to
your tree that way we know whether/when to take the corresponding DTS
changes? Thank you.

[1]:
https://git.kernel.org/torvalds/c/9f24a81e2e5daf8820c8654afcd8512e797c41f2

> 
> Regards,
> Srinath.
> 
> On Wed, Feb 6, 2019 at 5:28 AM Eduardo Valentin <edubezval@gmail.com> wrote:
>>
>> Hello,
>>
>> On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
>>> Hi Zhang/Eduardo,
>>>
>>> Can this patch series be merged? It looks like Srinath has addressed all
>>> review comments?
>>
>> I will take a look. Side note, thermal patches are reviewed on
>> linux-pm@vger.kernel.org. Copying that list it does help because that
>> is how the patches get assigned in patchwork.kernel.org.
>>
>>>
>>> The following tag should be added to the binding document patch:
>>>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>>
>>> Thanks,
>>>
>>> Ray
>>>
>>> On 1/3/2019 12:55 AM, Srinath Mannam wrote:
>>>> These patches adds the stingray thermal driver and its
>>>> corresponding DT nodes with documentation.
>>>>
>>>> Changes from v5
>>>>   - Addressed Eduardo Valentin comments.
>>>>
>>>> Changes from v4
>>>>   - Addressed Rob Herring comments on DT parameters and
>>>>     thermal driver architecture.
>>>>   - Removed brcm,max-crit-temp DT parameter
>>>>   - Changed driver to thermal sensor registration model.
>>>>   - Added trip DT properties.
>>>>
>>>> Changes from v3
>>>>   - Addressed Daniel lezcano comments.
>>>>   - Elaborated commit description of thermal driver patch.
>>>>   - Added brcm,max-crit-temp DT parameter.
>>>>
>>>> Changes from v2:
>>>>   - All stingray TMON DT nodes are combine together into single.
>>>>     Temperature registers are combined into one mem resource.
>>>>     brcm,tmon-mask parameter has available TMONs mask value.
>>>>   - All available TMONs are initialized together in single
>>>>     instance of driver probe call.
>>>>
>>>> Changes from v1:
>>>>   - Fixed auto build sparce warning.
>>>>
>>>> Pramod Kumar (3):
>>>>   dt-bindings: thermal: Add binding document for SR thermal
>>>>   thermal: broadcom: Add Stingray thermal driver
>>>>   arm64: dts: stingray: Add Stingray Thermal DT support.
>>>>
>>>>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
>>>>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
>>>>  drivers/thermal/Kconfig                            |   3 +-
>>>>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>>>>  drivers/thermal/broadcom/Makefile                  |   1 +
>>>>  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
>>>>  6 files changed, 328 insertions(+), 1 deletion(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>>>>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>>>>


-- 
Florian