From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Michael Jamet <michael.jamet@intel.com>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Andreas Noever <andreas.noever@gmail.com>,
Lukas Wunner <lukas@wunner.de>,
"David S . Miller" <davem@davemloft.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
netdev@vger.kernel.org
Subject: [PATCH v2 15/28] thunderbolt: Deactivate all paths before restarting them
Date: Wed, 6 Feb 2019 16:17:25 +0300 [thread overview]
Message-ID: <20190206131738.43696-16-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20190206131738.43696-1-mika.westerberg@linux.intel.com>
We can't be sure the paths are actually properly deactivated when a
tunnel is restarted after resume. So instead of marking all paths as
inactive we go ahead and deactivate them explicitly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/thunderbolt/tunnel.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index cdf9ca1c043e..b48c66efe87a 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -183,8 +183,15 @@ int tb_tunnel_restart(struct tb_tunnel *tunnel)
tb_tunnel_info(tunnel, "activating\n");
+ /* Make sure all paths are properly disabled before enable them again */
+ for (i = 0; i < tunnel->npaths; i++) {
+ if (tunnel->paths[i]->activated) {
+ tb_path_deactivate(tunnel->paths[i]);
+ tunnel->paths[i]->activated = false;
+ }
+ }
+
for (i = 0; i < tunnel->npaths; i++) {
- tunnel->paths[i]->activated = false;
res = tb_path_activate(tunnel->paths[i]);
if (res)
goto err;
--
2.20.1
next prev parent reply other threads:[~2019-02-06 13:19 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-06 13:17 [PATCH v2 00/28] thunderbolt: Software connection manager improvements Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 01/28] net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 02/28] thunderbolt: Do not allocate switch if depth is greater than 6 Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 03/28] thunderbolt: Enable TMU access when accessing port space on legacy devices Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 04/28] thunderbolt: Add dummy read after port capability list walk on Light Ridge Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 05/28] thunderbolt: Move LC specific functionality into a separate file Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 06/28] thunderbolt: Configure lanes when switch is initialized Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 07/28] thunderbolt: Set sleep bit when suspending switch Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 08/28] thunderbolt: Properly disable path Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 09/28] thunderbolt: Cache adapter specific capability offset into struct port Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 10/28] thunderbolt: Rename tunnel_pci to tunnel Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 11/28] thunderbolt: Generalize tunnel creation functionality Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 12/28] thunderbolt: Add functions for allocating and releasing hop IDs Mika Westerberg
2019-02-10 12:13 ` Lukas Wunner
2019-02-11 8:30 ` Mika Westerberg
2019-02-12 12:43 ` Lukas Wunner
2019-02-12 12:51 ` Mika Westerberg
2019-02-12 12:59 ` Lukas Wunner
2019-02-12 13:02 ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 13/28] thunderbolt: Add helper function to iterate from one port to another Mika Westerberg
2019-02-07 14:33 ` Andy Shevchenko
2019-02-11 6:16 ` Lukas Wunner
2019-02-11 9:54 ` Mika Westerberg
2019-02-12 13:55 ` Lukas Wunner
2019-02-12 19:03 ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 14/28] thunderbolt: Extend tunnel creation to more than 2 adjacent switches Mika Westerberg
2019-02-10 15:33 ` Lukas Wunner
2019-02-11 8:45 ` Mika Westerberg
2019-02-12 12:54 ` Lukas Wunner
2019-02-06 13:17 ` Mika Westerberg [this message]
2019-02-11 6:35 ` [PATCH v2 15/28] thunderbolt: Deactivate all paths before restarting them Lukas Wunner
2019-02-11 8:52 ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 16/28] thunderbolt: Discover preboot PCIe paths the boot firmware established Mika Westerberg
2019-02-12 17:49 ` Lukas Wunner
2019-02-12 18:34 ` Mika Westerberg
2019-02-12 19:42 ` Lukas Wunner
2019-02-13 8:30 ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 17/28] thunderbolt: Add support for full PCIe daisy chains Mika Westerberg
2019-03-24 11:31 ` Lukas Wunner
2019-03-25 9:57 ` Mika Westerberg
2019-03-25 11:16 ` Lukas Wunner
2019-03-25 11:22 ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 18/28] thunderbolt: Scan only valid NULL adapter ports in hotplug Mika Westerberg
2019-02-12 14:04 ` Lukas Wunner
2019-02-12 18:46 ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 19/28] thunderbolt: Generalize port finding routines to support all port types Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 20/28] thunderbolt: Rework NFC credits handling Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 21/28] thunderbolt: Add support for Display Port tunnels Mika Westerberg
2019-02-07 14:28 ` Andy Shevchenko
2019-02-06 13:17 ` [PATCH v2 22/28] thunderbolt: Run tb_xdp_handle_request() in system workqueue Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 23/28] thunderbolt: Add XDomain UUID exchange support Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 24/28] thunderbolt: Add support for DMA tunnels Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 25/28] thunderbolt: Make tb_switch_alloc() return ERR_PTR() Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 26/28] thunderbolt: Add support for XDomain connections Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 27/28] thunderbolt: Make rest of the logging to happen at debug level Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 28/28] thunderbolt: Start firmware on Titan Ridge Apple systems Mika Westerberg
2019-02-07 14:22 ` [PATCH v2 00/28] thunderbolt: Software connection manager improvements Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190206131738.43696-16-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=michael.jamet@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).