linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
	Michael Jamet <michael.jamet@intel.com>,
	Yehezkel Bernat <YehezkelShB@gmail.com>,
	Andreas Noever <andreas.noever@gmail.com>,
	Lukas Wunner <lukas@wunner.de>,
	"David S . Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Subject: Re: [PATCH v2 00/28] thunderbolt: Software connection manager improvements
Date: Thu, 7 Feb 2019 16:22:46 +0200	[thread overview]
Message-ID: <20190207142246.GG9224@smile.fi.intel.com> (raw)
In-Reply-To: <20190206131738.43696-1-mika.westerberg@linux.intel.com>

On Wed, Feb 06, 2019 at 04:17:10PM +0300, Mika Westerberg wrote:
> Hi,
> 
> Software connection manager (drivers/thunderbolt/tb.c) is used on older
> Apple hardware with Light Ridge, Cactus Ridge or Falcon Ridge controllers
> to create PCIe tunnels when a Thunderbolt device is connected. Currently
> only one PCIe tunnel is supported. On newer Alpine Ridge based Apple
> systems the driver starts the firmware which then takes care creating
> tunnels.
> 
> This series improves the software connection manager so that it will
> support:
> 
>   - Full PCIe daisy chains (up to 6 devices)
>   - Display Port tunneling
>   - P2P networking
> 
> We also add support for Titan Ridge based Apple systems where we can use
> the same flows than with Alpine Ridge to start the firmware.
> 
> Note in order to prevent possible DMA attacks on these systems we should
> make sure IOMMU is enabled. One option is to force dmar_platform_optin()
> return true on Apple hardware. However, it is not part of this series. I'm
> trusting people using Linux on such systems to take care of it.  :-)
> 
> Previous version of the patch series can be viewed here:
> 
>   https://lkml.org/lkml/2019/1/29/924


From code style and some other things we discussed off list the series looks
good to me.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Though minor comments per individual patches are provided.

> 
> Changes from v1:
> 
>   * Added ACK from David
> 
>   * Add constant (TMU_ACCESS_EN) for BIT(20) when TMU access is enabled. We
>     keep it in cap.c close to the LR/ER workaround. Also we enable/disable
>     only during capability walk. If it turns we need to have it enabled
>     elsewhere we can move it to switch.c and enable just once during
>     switch enumeration.
> 
>   * Use 0 to mean no cap_adap instead of negative value. This follows
>     cap_phy.
> 
>   * Use correct PCI IDs (_BRIDGE) in the last patch where we start firmware
>     on Titan Ridge. It wrongly used NHI PCI IDs in v1.
> 
> Mika Westerberg (28):
>   net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending
>   thunderbolt: Do not allocate switch if depth is greater than 6
>   thunderbolt: Enable TMU access when accessing port space on legacy devices
>   thunderbolt: Add dummy read after port capability list walk on Light Ridge
>   thunderbolt: Move LC specific functionality into a separate file
>   thunderbolt: Configure lanes when switch is initialized
>   thunderbolt: Set sleep bit when suspending switch
>   thunderbolt: Properly disable path
>   thunderbolt: Cache adapter specific capability offset into struct port
>   thunderbolt: Rename tunnel_pci to tunnel
>   thunderbolt: Generalize tunnel creation functionality
>   thunderbolt: Add functions for allocating and releasing hop IDs
>   thunderbolt: Add helper function to iterate from one port to another
>   thunderbolt: Extend tunnel creation to more than 2 adjacent switches
>   thunderbolt: Deactivate all paths before restarting them
>   thunderbolt: Discover preboot PCIe paths the boot firmware established
>   thunderbolt: Add support for full PCIe daisy chains
>   thunderbolt: Scan only valid NULL adapter ports in hotplug
>   thunderbolt: Generalize port finding routines to support all port types
>   thunderbolt: Rework NFC credits handling
>   thunderbolt: Add support for Display Port tunnels
>   thunderbolt: Run tb_xdp_handle_request() in system workqueue
>   thunderbolt: Add XDomain UUID exchange support
>   thunderbolt: Add support for DMA tunnels
>   thunderbolt: Make tb_switch_alloc() return ERR_PTR()
>   thunderbolt: Add support for XDomain connections
>   thunderbolt: Make rest of the logging to happen at debug level
>   thunderbolt: Start firmware on Titan Ridge Apple systems
> 
>  drivers/net/thunderbolt.c        |   3 +
>  drivers/thunderbolt/Makefile     |   4 +-
>  drivers/thunderbolt/cap.c        |  90 +++-
>  drivers/thunderbolt/ctl.c        |   2 +-
>  drivers/thunderbolt/icm.c        |  15 +-
>  drivers/thunderbolt/lc.c         | 179 ++++++++
>  drivers/thunderbolt/path.c       | 326 +++++++++++++--
>  drivers/thunderbolt/switch.c     | 466 ++++++++++++++++++---
>  drivers/thunderbolt/tb.c         | 529 ++++++++++++++++++------
>  drivers/thunderbolt/tb.h         |  67 ++-
>  drivers/thunderbolt/tb_msgs.h    |  11 +
>  drivers/thunderbolt/tb_regs.h    |  50 ++-
>  drivers/thunderbolt/tunnel.c     | 681 +++++++++++++++++++++++++++++++
>  drivers/thunderbolt/tunnel.h     |  75 ++++
>  drivers/thunderbolt/tunnel_pci.c | 226 ----------
>  drivers/thunderbolt/tunnel_pci.h |  31 --
>  drivers/thunderbolt/xdomain.c    | 142 ++++++-
>  include/linux/thunderbolt.h      |   8 +
>  18 files changed, 2389 insertions(+), 516 deletions(-)
>  create mode 100644 drivers/thunderbolt/lc.c
>  create mode 100644 drivers/thunderbolt/tunnel.c
>  create mode 100644 drivers/thunderbolt/tunnel.h
>  delete mode 100644 drivers/thunderbolt/tunnel_pci.c
>  delete mode 100644 drivers/thunderbolt/tunnel_pci.h
> 
> -- 
> 2.20.1
> 

-- 
With Best Regards,
Andy Shevchenko



      parent reply	other threads:[~2019-02-07 14:22 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06 13:17 [PATCH v2 00/28] thunderbolt: Software connection manager improvements Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 01/28] net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 02/28] thunderbolt: Do not allocate switch if depth is greater than 6 Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 03/28] thunderbolt: Enable TMU access when accessing port space on legacy devices Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 04/28] thunderbolt: Add dummy read after port capability list walk on Light Ridge Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 05/28] thunderbolt: Move LC specific functionality into a separate file Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 06/28] thunderbolt: Configure lanes when switch is initialized Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 07/28] thunderbolt: Set sleep bit when suspending switch Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 08/28] thunderbolt: Properly disable path Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 09/28] thunderbolt: Cache adapter specific capability offset into struct port Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 10/28] thunderbolt: Rename tunnel_pci to tunnel Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 11/28] thunderbolt: Generalize tunnel creation functionality Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 12/28] thunderbolt: Add functions for allocating and releasing hop IDs Mika Westerberg
2019-02-10 12:13   ` Lukas Wunner
2019-02-11  8:30     ` Mika Westerberg
2019-02-12 12:43       ` Lukas Wunner
2019-02-12 12:51         ` Mika Westerberg
2019-02-12 12:59           ` Lukas Wunner
2019-02-12 13:02             ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 13/28] thunderbolt: Add helper function to iterate from one port to another Mika Westerberg
2019-02-07 14:33   ` Andy Shevchenko
2019-02-11  6:16   ` Lukas Wunner
2019-02-11  9:54     ` Mika Westerberg
2019-02-12 13:55       ` Lukas Wunner
2019-02-12 19:03         ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 14/28] thunderbolt: Extend tunnel creation to more than 2 adjacent switches Mika Westerberg
2019-02-10 15:33   ` Lukas Wunner
2019-02-11  8:45     ` Mika Westerberg
2019-02-12 12:54       ` Lukas Wunner
2019-02-06 13:17 ` [PATCH v2 15/28] thunderbolt: Deactivate all paths before restarting them Mika Westerberg
2019-02-11  6:35   ` Lukas Wunner
2019-02-11  8:52     ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 16/28] thunderbolt: Discover preboot PCIe paths the boot firmware established Mika Westerberg
2019-02-12 17:49   ` Lukas Wunner
2019-02-12 18:34     ` Mika Westerberg
2019-02-12 19:42   ` Lukas Wunner
2019-02-13  8:30     ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 17/28] thunderbolt: Add support for full PCIe daisy chains Mika Westerberg
2019-03-24 11:31   ` Lukas Wunner
2019-03-25  9:57     ` Mika Westerberg
2019-03-25 11:16       ` Lukas Wunner
2019-03-25 11:22         ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 18/28] thunderbolt: Scan only valid NULL adapter ports in hotplug Mika Westerberg
2019-02-12 14:04   ` Lukas Wunner
2019-02-12 18:46     ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 19/28] thunderbolt: Generalize port finding routines to support all port types Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 20/28] thunderbolt: Rework NFC credits handling Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 21/28] thunderbolt: Add support for Display Port tunnels Mika Westerberg
2019-02-07 14:28   ` Andy Shevchenko
2019-02-06 13:17 ` [PATCH v2 22/28] thunderbolt: Run tb_xdp_handle_request() in system workqueue Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 23/28] thunderbolt: Add XDomain UUID exchange support Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 24/28] thunderbolt: Add support for DMA tunnels Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 25/28] thunderbolt: Make tb_switch_alloc() return ERR_PTR() Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 26/28] thunderbolt: Add support for XDomain connections Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 27/28] thunderbolt: Make rest of the logging to happen at debug level Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 28/28] thunderbolt: Start firmware on Titan Ridge Apple systems Mika Westerberg
2019-02-07 14:22 ` Andy Shevchenko [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190207142246.GG9224@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=michael.jamet@intel.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).