[PATCH v3 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

[PATCH v3 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

[Nava kishore Manne]

Add documentation to describe Xilinx ZynqMP fpga driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v3:
		-Created patches on top of 5.0-rc5.
                 No functional changes.
Changes for v2:
                -Removed "----" separators.
Changes for v1:
                -Created a Seperate(New) DT binding file as
                 suggested by Rob.

Changes for RFC-V2:
                -Moved pcap node as a child to firwmare
                 node as suggested by Rob.

 .../devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt      | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 0000000..1f6f588
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,13 @@
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example:
+	zynqmp_pcap: pcap {
+		compatible = "xlnx,zynqmp-pcap-fpga";
+	};
-- 
2.7.4

Re: [PATCH v3 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

[Moritz Fischer]

Hi Nava,

a couple of nits inline. otherwise looks fine to me.

On Sun, Feb 10, 2019 at 8:17 AM Nava kishore Manne
<nava.manne@xilinx.com> wrote:
>
> Add documentation to describe Xilinx ZynqMP fpga driver
> bindings.
>
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> Changes for v3:
>                 -Created patches on top of 5.0-rc5.
>                  No functional changes.
> Changes for v2:
>                 -Removed "----" separators.
> Changes for v1:
>                 -Created a Seperate(New) DT binding file as
>                  suggested by Rob.
>
> Changes for RFC-V2:
>                 -Moved pcap node as a child to firwmare
>                  node as suggested by Rob.
>
>  .../devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt      | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> new file mode 100644
> index 0000000..1f6f588
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> @@ -0,0 +1,13 @@
> +Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
> +using ZynqMP SoC firmware interface

How about:
Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.

> +For Bitstream configuration on ZynqMp Soc uses processor configuration
> +port(PCAP) to configure the programmable logic(PL) through PS by using
> +FW interface.
ZynqMP or ZynqMp, let's stay consistent here.

How about:
The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
Programmable Logic (PL). The configuration uses  the firmware interface.
> +
> +Required properties:
> +- compatible: should contain "xlnx,zynqmp-pcap-fpga"
> +
> +Example:
> +       zynqmp_pcap: pcap {
> +               compatible = "xlnx,zynqmp-pcap-fpga";
> +       };
> --
> 2.7.4
>

Thanks,
Moritz

Re: [PATCH v3 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

[Rob Herring]

On Mon, Feb 11, 2019 at 09:47:36PM +0530, Nava kishore Manne wrote:
> Add documentation to describe Xilinx ZynqMP fpga driver
> bindings.

I thought I was told in the review of the firmware binding that is went 
away...

> 
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> Changes for v3:
> 		-Created patches on top of 5.0-rc5.
>                  No functional changes.
> Changes for v2:
>                 -Removed "----" separators.
> Changes for v1:
>                 -Created a Seperate(New) DT binding file as
>                  suggested by Rob.
> 
> Changes for RFC-V2:
>                 -Moved pcap node as a child to firwmare
>                  node as suggested by Rob.
> 
>  .../devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt      | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> new file mode 100644
> index 0000000..1f6f588
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> @@ -0,0 +1,13 @@
> +Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
> +using ZynqMP SoC firmware interface
> +For Bitstream configuration on ZynqMp Soc uses processor configuration
> +port(PCAP) to configure the programmable logic(PL) through PS by using
> +FW interface.
> +
> +Required properties:
> +- compatible: should contain "xlnx,zynqmp-pcap-fpga"
> +
> +Example:
> +	zynqmp_pcap: pcap {
> +		compatible = "xlnx,zynqmp-pcap-fpga";

There's no DT resources here, so there's no need for this in DT. Just 
have the parent (the firmware driver) instantiate the driver.

Rob