From: Sean Young <sean@mess.org>
To: Gonsolo <gonsolo@gmail.com>
Cc: crope@iki.fi, linux-media@vger.kernel.org,
Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: DVB-T2 Stick
Date: Tue, 19 Feb 2019 21:30:03 +0000 [thread overview]
Message-ID: <20190219213003.l7hzy2emdsxe4izy@gofer.mess.org> (raw)
In-Reply-To: <CANL0fFSGG_+R2zbf-9MxVLJMTMgc+-fwSoLCqS1qc+jWo-zNLA@mail.gmail.com>
Hi,
On Wed, Jan 30, 2019 at 11:32:12AM +0100, Gonsolo wrote:
> Hi!
>
> The following patch adds support for the Logilink VG0022A DVB-T2 stick.
> After patching and building the kernel it shows up with lsusb and I
> used w_scan to scan for channels and vlc for watching.
> The original patches were from Andreas Kemnade.
> The only thing that doesn't work is wake up after standby.
>
> Do you think you can apply this patch?
I'm afraid there are many problems with this patch. First of all it looks
like support was added for a si2168 tuner but it looks like it will break
for any other si2157-type device.
Secondly there are lots of coding style issues, see:
https://www.kernel.org/doc/html/v4.10/process/coding-style.html
Thanks,
Sean
>
> Thanks
> --
> g
> diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
> index d389f1fc237a..1f923418ff10 100644
> --- a/drivers/media/tuners/si2157.c
> +++ b/drivers/media/tuners/si2157.c
> @@ -84,7 +84,7 @@ static int si2157_init(struct dvb_frontend *fe)
> struct si2157_cmd cmd;
> const struct firmware *fw;
> const char *fw_name;
> - unsigned int uitmp, chip_id;
> + unsigned int uitmp;
>
> dev_dbg(&client->dev, "\n");
>
> @@ -126,7 +126,7 @@ static int si2157_init(struct dvb_frontend *fe)
> if (ret)
> goto err;
> }
> -
> +#if 0
> /* query chip revision */
> memcpy(cmd.args, "\x02", 1);
> cmd.wlen = 1;
> @@ -146,6 +146,8 @@ static int si2157_init(struct dvb_frontend *fe)
> #define SI2141_A10 ('A' << 24 | 41 << 16 | '1' << 8 | '0' << 0)
>
> switch (chip_id) {
> +#endif
> + switch (dev->chip_id) {
> case SI2158_A20:
> case SI2148_A20:
> fw_name = SI2158_A20_FIRMWARE;
> @@ -166,9 +168,9 @@ static int si2157_init(struct dvb_frontend *fe)
> goto err;
> }
>
> - dev_info(&client->dev, "found a 'Silicon Labs Si21%d-%c%c%c'\n",
> - cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]);
> -
> +// dev_info(&client->dev, "found a 'Silicon Labs Si21%d-%c%c%c'\n",
> +// cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]);
> +//
> if (fw_name == NULL)
> goto skip_fw_download;
>
> @@ -461,6 +463,38 @@ static int si2157_probe(struct i2c_client *client,
> memcpy(&fe->ops.tuner_ops, &si2157_ops, sizeof(struct dvb_tuner_ops));
> fe->tuner_priv = client;
>
> + /* power up */
> + if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
> + memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
> + cmd.wlen = 9;
> + } else {
> + memcpy(cmd.args,
> + "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01",
> + 15);
> + cmd.wlen = 15;
> + }
> + cmd.rlen = 1;
> + ret = si2157_cmd_execute(client, &cmd);
> + if (ret)
> + goto err;
> + /* query chip revision */
> + /* hack: do it here because after the si2168 gets 0101, commands will
> + * still be executed here but no result
> + */
> + memcpy(cmd.args, "\x02", 1);
> + cmd.wlen = 1;
> + cmd.rlen = 13;
> + ret = si2157_cmd_execute(client, &cmd);
> + if (ret)
> + goto err_kfree;
> + dev->chip_id = cmd.args[1] << 24 |
> + cmd.args[2] << 16 |
> + cmd.args[3] << 8 |
> + cmd.args[4] << 0;
> + dev_info(&client->dev, "found a 'Silicon Labs Si21%d-%c%c%c'\n",
> + cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]);
> +
> +
> #ifdef CONFIG_MEDIA_CONTROLLER
> if (cfg->mdev) {
> dev->mdev = cfg->mdev;
> diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h
> index 50f86300d965..3592146cf49a 100644
> --- a/drivers/media/tuners/si2157_priv.h
> +++ b/drivers/media/tuners/si2157_priv.h
> @@ -37,6 +37,7 @@ struct si2157_dev {
> u8 chiptype;
> u8 if_port;
> u32 if_frequency;
> + u32 chip_id;
> struct delayed_work stat_work;
>
> #if defined(CONFIG_MEDIA_CONTROLLER)
> @@ -51,6 +52,13 @@ struct si2157_dev {
> #define SI2157_CHIPTYPE_SI2146 1
> #define SI2157_CHIPTYPE_SI2141 2
>
> +#define SI2158_A20 ('A' << 24 | 58 << 16 | '2' << 8 | '0' << 0)
> +#define SI2148_A20 ('A' << 24 | 48 << 16 | '2' << 8 | '0' << 0)
> +#define SI2157_A30 ('A' << 24 | 57 << 16 | '3' << 8 | '0' << 0)
> +#define SI2147_A30 ('A' << 24 | 47 << 16 | '3' << 8 | '0' << 0)
> +#define SI2146_A10 ('A' << 24 | 46 << 16 | '1' << 8 | '0' << 0)
> +#define SI2141_A10 ('A' << 24 | 41 << 16 | '1' << 8 | '0' << 0)
> +
> /* firmware command struct */
> #define SI2157_ARGLEN 30
> struct si2157_cmd {
> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
> index 80d3bd3a0f24..28b073bfe0d4 100644
> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> @@ -1216,8 +1216,51 @@ static int it930x_frontend_attach(struct dvb_usb_adapter *adap)
> struct si2168_config si2168_config;
> struct i2c_adapter *adapter;
>
> - dev_dbg(&intf->dev, "adap->id=%d\n", adap->id);
> -
> + //dev_dbg(&intf->dev, "adap->id=%d\n", adap->id);
> + dev_dbg(&intf->dev, "%s adap->id=%d\n", __func__, adap->id);
> +
> + /* I2C master bus 2 clock speed 300k */
> + ret = af9035_wr_reg(d, 0x00f6a7, 0x07);
> + if (ret < 0)
> + goto err;
> +
> + /* I2C master bus 1,3 clock speed 300k */
> + ret = af9035_wr_reg(d, 0x00f103, 0x07);
> + if (ret < 0)
> + goto err;
> +
> + /* set gpio11 low */
> + ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */
> + ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01);
> + if (ret < 0)
> + goto err;
> +
> + msleep(200);
> +
> + ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01);
> + if (ret < 0)
> + goto err;
> +
> memset(&si2168_config, 0, sizeof(si2168_config));
> si2168_config.i2c_adapter = &adapter;
> si2168_config.fe = &adap->fe[0];
> @@ -2128,6 +2171,8 @@ static const struct usb_device_id af9035_id_table[] = {
> /* IT930x devices */
> { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303,
> &it930x_props, "ITE 9303 Generic", NULL) },
> + { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100,
> + &it930x_props, "Logilink VG0022A", NULL) },
> { }
> };
> MODULE_DEVICE_TABLE(usb, af9035_id_table);
next prev parent reply other threads:[~2019-02-19 21:30 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 10:32 DVB-T2 Stick Gonsolo
2019-02-19 21:30 ` Sean Young [this message]
2019-10-01 22:19 ` Gonsolo
2019-10-01 23:52 ` Mauro Carvalho Chehab
2019-10-02 14:13 ` [PATCH] si2157: Add support for Logilink VG0022A Gon Solo
2019-10-02 14:13 ` Gon Solo
2019-10-02 14:27 ` Sean Young
2019-10-02 14:44 ` Gonsolo
2019-10-02 15:06 ` Sean Young
2019-10-02 15:21 ` Gonsolo
2019-10-02 17:23 ` JP
2019-10-02 18:49 ` Mauro Carvalho Chehab
2019-10-03 8:06 ` [PATCH 0/1] Testing timing patch " Gon Solo
2019-10-03 8:06 ` [PATCH 1/1] Test Mauros timing patch Gon Solo
2019-10-03 10:13 ` [PATCH] si2157: Add support for Logilink VG0022A Gonsolo
2019-10-03 10:57 ` Gonsolo
2019-10-03 11:17 ` Mauro Carvalho Chehab
2019-10-03 11:41 ` Gonsolo
2019-10-03 12:49 ` Mauro Carvalho Chehab
2019-10-03 12:52 ` Mauro Carvalho Chehab
2019-10-03 13:02 ` Gon Solo
2019-10-03 13:53 ` Gonsolo
2019-10-03 14:05 ` Mauro Carvalho Chehab
2019-10-03 14:29 ` Gonsolo
2019-10-03 12:01 ` Gon Solo
2019-10-03 12:12 ` Mauro Carvalho Chehab
2019-10-03 12:20 ` Gon Solo
2019-10-03 12:45 ` [PATCH 0/3] " Gon Solo
2019-10-03 12:45 ` [PATCH 1/3] [PATCH] af9035: Better explain how i2c bus speed is computed Gon Solo
2019-10-03 12:45 ` [PATCH 2/3] [PATCH] s2157: Handle bogus chip version Gon Solo
2019-10-03 12:45 ` [PATCH 3/3] [PATCH] af9035: Add Logilink VG0022A id Gon Solo
2019-10-03 11:05 ` [PATCH] si2157: Add support for Logilink VG0022A Mauro Carvalho Chehab
2019-10-03 15:00 ` Gonsolo
2019-10-03 15:02 ` Mauro Carvalho Chehab
2019-10-03 15:17 ` Gonsolo
2019-10-03 16:03 ` Gon Solo
2019-10-03 16:09 ` Mauro Carvalho Chehab
2019-10-03 16:23 ` Gon Solo
2019-10-03 17:42 ` Mauro Carvalho Chehab
2019-10-03 17:49 ` Gonsolo
2019-10-03 18:32 ` Gon Solo
2019-10-03 18:42 ` JP
2019-10-03 18:50 ` Gonsolo
2019-10-03 18:53 ` Gonsolo
2019-10-03 19:19 ` Gonsolo
2019-10-03 19:39 ` Mauro Carvalho Chehab
2019-10-03 19:44 ` Mauro Carvalho Chehab
2019-10-03 19:51 ` Gonsolo
2019-10-03 20:03 ` Mauro Carvalho Chehab
2019-10-03 20:32 ` Gonsolo
2019-10-04 11:50 ` JP
2019-10-04 12:08 ` Mauro Carvalho Chehab
2019-10-04 13:15 ` [PATCH 1/4] media: si2168: use bits instead of bool for flags Mauro Carvalho Chehab
2019-10-04 13:15 ` [PATCH 2/4] media: si2168: add support for not loading a firmware Mauro Carvalho Chehab
2019-10-04 13:15 ` [PATCH 3/4] media: af9035: add support for Logilink VG0022A Mauro Carvalho Chehab
2019-10-09 21:44 ` Gon Solo
2019-10-09 22:04 ` Gon Solo
2019-10-10 8:23 ` Gon Solo
2019-10-10 9:18 ` Gon Solo
2019-10-10 9:50 ` [PATCH 0/4] Add " Gon Solo
2019-10-10 10:10 ` Mauro Carvalho Chehab
2019-10-10 9:51 ` [PATCH 1/4] si2168: Use bits and convert to kernel-doc format Gon Solo
2019-10-10 9:51 ` [PATCH 2/4] si2157: Add option for not downloading firmware Gon Solo
2019-10-10 9:51 ` [PATCH 3/4] af9035: Make speed computation clear Gon Solo
2019-10-10 9:51 ` [PATCH 4/4] Add support for Logilink VG0022A Gon Solo
2019-10-10 11:44 ` Gon Solo
2019-11-15 18:06 ` Gon Solo
2019-10-04 13:15 ` [PATCH 4/4] media: af9035: add the formula used for the I2C speed Mauro Carvalho Chehab
2019-10-10 10:55 ` [PATCH 1/4] media: si2168: use bits instead of bool for flags Gon Solo
2019-10-10 11:34 ` Mauro Carvalho Chehab
2019-10-10 11:42 ` Mauro Carvalho Chehab
2019-10-04 13:50 ` [PATCH] si2157: Add support for Logilink VG0022A JP
2019-10-04 14:16 ` Mauro Carvalho Chehab
2019-10-03 19:40 ` Gonsolo
2019-10-03 19:52 ` Mauro Carvalho Chehab
2019-10-03 19:57 ` Gonsolo
2019-10-02 15:00 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219213003.l7hzy2emdsxe4izy@gofer.mess.org \
--to=sean@mess.org \
--cc=crope@iki.fi \
--cc=gonsolo@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).