Re: [PATCH] i2c: Allow recovery of the initial IRQ by an I2C client device.

[Charles Keepax <ckeepax@opensource.cirrus.com>]

On Fri, Feb 22, 2019 at 11:23:35AM +0100, Wolfram Sang wrote:
> On Fri, Feb 22, 2019 at 11:15:59AM +0100, Benjamin Tissoires wrote:
> > On Fri, Feb 22, 2019 at 12:26 AM Wolfram Sang <wsa@the-dreams.de> wrote:
> > > On Tue, Feb 19, 2019 at 11:30:27AM -0800, Jim Broadus wrote:
> > > > A previous change allowed I2C client devices to discover new IRQs upon
> > > > reprobe by clearing the IRQ in i2c_device_remove. However, if an IRQ was
> > > > assigned in i2c_new_device, that information is lost.
> > > >
> > > > For example, the touchscreen and trackpad devices on a Dell Inspiron laptop
> > > > are I2C devices whose IRQs are defined by ACPI extended IRQ types. The
> > > > client device structures are initialized during an ACPI walk. After
> > > > removing the i2c_hid device, modprobe fails.
> > > >
> > > > This change caches the initial IRQ value in i2c_new_device and then resets
> > > > the client device IRQ to the initial value in i2c_device_remove.
> > > >
> > > > Fixes: 6f108dd70d30 ("i2c: Clear client->irq in i2c_device_remove")
> > > > Signed-off-by: Jim Broadus <jbroadus@gmail.com>
> > >
> > > Adding Benjamin to CC
> > 
> > Sorry, I should have answered earlier.
> > 
> > I am a little bit hesitant regarding this patch. The effect is
> > correct, and I indeed realized a few weeks ago that something were
> > wrong as we couldn't rmmod/modprobe i2c-hid.
> > 
> > But I still have the feeling that the problem is not solved at the
> > right place. In i2c_new_device() we are storing parts of the fields of
> > struct i2c_board_info, and when resetting the irq we are losing
> > information. This patch solves that, but I wonder if the IRQ should
> > not be 'simply' set in i2c_device_probe(). This means we also need to
> > store the .resources of info, but I have a feeling this will be less
> > error prone in the future.
> > 
> > But this is just my guts telling me something is not right. I would
> > perfectly understand if we want to get this merged ASAP.
> > 
> > So given that the code is correct, this is my:
> > Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> > 
> > But at least I have expressed my feelings :)
> 
> Which I can relate to very much. I see the code solves the issue but my
> feeling is that we are patching around something which should be handled
> differently in general.
> 
> Is somebody willing to research this further?
> 
> Thanks for your input.
> 

I would be willing to have more of a look at it but am slightly
nervous I am not right person as all the systems I currently work
with are DT based so don't really exemplify the issue at all.

Thanks,
Charles