linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Support Opensource <support.opensource@diasemi.com>,
	patches@opensource.cirrus.com,
	Ashish Jangam <ashish.jangam@kpitcummins.com>,
	Steve Twiss <stwiss.opensource@diasemi.com>,
	Paul Kocialkowski <contact@paulk.fr>, Milo Kim <milo.kim@ti.com>,
	Keerthy <j-keerthy@ti.com>,
	James Ban <James.Ban.opensource@diasemi.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH 04/11] regulator: da9210: Convert to use regulator_set/get_current_limit_regmap
Date: Thu, 28 Feb 2019 21:40:15 +0800	[thread overview]
Message-ID: <20190228134022.32625-5-axel.lin@ingics.com> (raw)
In-Reply-To: <20190228134022.32625-1-axel.lin@ingics.com>

Use regulator_set/get_current_limit_regmap helpers to save some code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/da9210-regulator.c | 53 ++++------------------------
 1 file changed, 7 insertions(+), 46 deletions(-)

diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 84dba64ed11e..528303771723 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -41,10 +41,6 @@ static const struct regmap_config da9210_regmap_config = {
 	.val_bits = 8,
 };
 
-static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
-				    int max_uA);
-static int da9210_get_current_limit(struct regulator_dev *rdev);
-
 static const struct regulator_ops da9210_buck_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -52,8 +48,8 @@ static const struct regulator_ops da9210_buck_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.list_voltage = regulator_list_voltage_linear,
-	.set_current_limit = da9210_set_current_limit,
-	.get_current_limit = da9210_get_current_limit,
+	.set_current_limit = regulator_set_current_limit_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
 };
 
 /* Default limits measured in millivolts and milliamps */
@@ -62,7 +58,7 @@ static const struct regulator_ops da9210_buck_ops = {
 #define DA9210_STEP_MV		10
 
 /* Current limits for buck (uA) indices corresponds with register values */
-static const int da9210_buck_limits[] = {
+static const unsigned int da9210_buck_limits[] = {
 	1600000, 1800000, 2000000, 2200000, 2400000, 2600000, 2800000, 3000000,
 	3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, 4600000
 };
@@ -80,47 +76,12 @@ static const struct regulator_desc da9210_reg = {
 	.enable_reg = DA9210_REG_BUCK_CONT,
 	.enable_mask = DA9210_BUCK_EN,
 	.owner = THIS_MODULE,
+	.curr_table = da9210_buck_limits,
+	.n_current_limits = ARRAY_SIZE(da9210_buck_limits),
+	.csel_reg = DA9210_REG_BUCK_ILIM,
+	.csel_mask = DA9210_BUCK_ILIM_MASK,
 };
 
-static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
-				    int max_uA)
-{
-	struct da9210 *chip = rdev_get_drvdata(rdev);
-	unsigned int sel;
-	int i;
-
-	/* search for closest to maximum */
-	for (i = ARRAY_SIZE(da9210_buck_limits)-1; i >= 0; i--) {
-		if (min_uA <= da9210_buck_limits[i] &&
-		    max_uA >= da9210_buck_limits[i]) {
-			sel = i;
-			sel = sel << DA9210_BUCK_ILIM_SHIFT;
-			return regmap_update_bits(chip->regmap,
-						  DA9210_REG_BUCK_ILIM,
-						  DA9210_BUCK_ILIM_MASK, sel);
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int da9210_get_current_limit(struct regulator_dev *rdev)
-{
-	struct da9210 *chip = rdev_get_drvdata(rdev);
-	unsigned int data;
-	unsigned int sel;
-	int ret;
-
-	ret = regmap_read(chip->regmap, DA9210_REG_BUCK_ILIM, &data);
-	if (ret < 0)
-		return ret;
-
-	/* select one of 16 values: 0000 (1600mA) to 1111 (4600mA) */
-	sel = (data & DA9210_BUCK_ILIM_MASK) >> DA9210_BUCK_ILIM_SHIFT;
-
-	return da9210_buck_limits[sel];
-}
-
 static irqreturn_t da9210_irq_handler(int irq, void *data)
 {
 	struct da9210 *chip = data;
-- 
2.17.1


  parent reply	other threads:[~2019-02-28 13:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-28 13:40 [PATCH 00/11] regulator: Add set/get_current_limit helpers and use it Axel Lin
2019-02-28 13:40 ` [PATCH 01/11] regulator: Fix comment for csel_reg and csel_mask Axel Lin
2019-02-28 13:40 ` [PATCH 02/11] regulator: core: Add set/get_current_limit helpers for regmap users Axel Lin
2019-02-28 13:40 ` [PATCH 03/11] regulator: da9055: Convert to use regulator_set/get_current_limit_regmap Axel Lin
2019-02-28 15:18   ` Steve Twiss
2019-02-28 13:40 ` Axel Lin [this message]
2019-02-28 14:01   ` [PATCH 04/11] regulator: da9210: " Steve Twiss
2019-02-28 13:40 ` [PATCH 05/11] regulator: lp872x: " Axel Lin
2019-02-28 13:40 ` [PATCH 06/11] regulator: lp873x: " Axel Lin
2019-02-28 13:40 ` [PATCH 07/11] regulator: max77650: " Axel Lin
2019-02-28 14:11   ` Bartosz Golaszewski
2019-02-28 13:40 ` [PATCH 08/11] regulator: pv88060: " Axel Lin
2019-02-28 15:26   ` Steve Twiss
2019-02-28 13:40 ` [PATCH 09/11] regulator: pv88080: " Axel Lin
2019-02-28 15:41   ` Steve Twiss
2019-02-28 13:40 ` [PATCH 10/11] regulator: pv88090: " Axel Lin
2019-02-28 15:47   ` Steve Twiss
2019-02-28 13:40 ` [PATCH 11/11] regulator: wm831x-dcdc: " Axel Lin
2019-03-01  8:33   ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190228134022.32625-5-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=James.Ban.opensource@diasemi.com \
    --cc=ashish.jangam@kpitcummins.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=contact@paulk.fr \
    --cc=j-keerthy@ti.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=milo.kim@ti.com \
    --cc=patches@opensource.cirrus.com \
    --cc=stwiss.opensource@diasemi.com \
    --cc=support.opensource@diasemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).