[PATCH AUTOSEL 4.14 01/36] ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags

[PATCH AUTOSEL 4.14 01/36] ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit ef4a55b9197a8f844ea0663138e902dcce3e2f36 ]

We're now getting the following error:

genirq: Setting trigger mode 1 for irq 230 failed
(regmap_irq_set_type+0x0/0x15c)
cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524

Cc: Sebastian Reichel <sre@kernel.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 4d61e5b1334a6..bcced922b2807 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -92,7 +92,7 @@
 			interrupts-extended = <
 				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
 				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
-				&cpcap 48 1
+				&cpcap 48 0
 			>;
 			interrupt-names =
 				"id_ground", "id_float", "se0conn", "vbusvld",
-- 
2.19.1

[PATCH AUTOSEL 4.14 02/36] arm64: dts: renesas: r8a7796: Enable DMA for SCIF2

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]

SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.

Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 369092e17e341..016b84552a62a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -937,6 +937,9 @@
 				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
-- 
2.19.1

[PATCH AUTOSEL 4.14 03/36] soc: fsl: qbman: avoid race in clearing QMan interrupt

[Sasha Levin]

From: Madalin Bucur <madalin.bucur@nxp.com>

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]

By clearing all interrupt sources, not only those that
already occurred, the existing code may acknowledge by
mistake interrupts that occurred after the code checks
for them.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qbman/qman.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 4f27e95efcdd3..90892a360c61c 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -1048,18 +1048,19 @@ static void qm_mr_process_task(struct work_struct *work);
 static irqreturn_t portal_isr(int irq, void *ptr)
 {
 	struct qman_portal *p = ptr;
-
-	u32 clear = QM_DQAVAIL_MASK | p->irq_sources;
 	u32 is = qm_in(&p->p, QM_REG_ISR) & p->irq_sources;
+	u32 clear = 0;
 
 	if (unlikely(!is))
 		return IRQ_NONE;
 
 	/* DQRR-handling if it's interrupt-driven */
-	if (is & QM_PIRQ_DQRI)
+	if (is & QM_PIRQ_DQRI) {
 		__poll_portal_fast(p, QMAN_POLL_LIMIT);
+		clear = QM_DQAVAIL_MASK | QM_PIRQ_DQRI;
+	}
 	/* Handling of anything else that's interrupt-driven */
-	clear |= __poll_portal_slow(p, is);
+	clear |= __poll_portal_slow(p, is) & QM_PIRQ_SLOW;
 	qm_out(&p->p, QM_REG_ISR, clear);
 	return IRQ_HANDLED;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 04/36] bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

[Sasha Levin]

From: Yafang Shao <laoar.shao@gmail.com>

[ Upstream commit c9e4576743eeda8d24dedc164d65b78877f9a98c ]

When sock recvbuff is set by bpf_setsockopt(), the value must by
limited by rmem_max. It is the same with sendbuff.

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index 41ede90fc28f5..61396648381e5 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3081,10 +3081,12 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 		/* Only some socketops are supported */
 		switch (optname) {
 		case SO_RCVBUF:
+			val = min_t(u32, val, sysctl_rmem_max);
 			sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
 			sk->sk_rcvbuf = max_t(int, val * 2, SOCK_MIN_RCVBUF);
 			break;
 		case SO_SNDBUF:
+			val = min_t(u32, val, sysctl_wmem_max);
 			sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
 			sk->sk_sndbuf = max_t(int, val * 2, SOCK_MIN_SNDBUF);
 			break;
-- 
2.19.1

[PATCH AUTOSEL 4.14 05/36] ARM: pxa: ssp: unneeded to free devm_ allocated data

[Sasha Levin]

From: Peng Hao <peng.hao2@zte.com.cn>

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]

devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-pxa/ssp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce4..b92673efffffb 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -237,8 +237,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	if (ssp == NULL)
 		return -ENODEV;
 
-	iounmap(ssp->mmio_base);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
@@ -248,7 +246,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
 
-	kfree(ssp);
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 06/36] arm64: dts: add msm8996 compatible to gicv3

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ab00be277c6fc..6f372ec055dd3 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -359,7 +359,7 @@
 		};
 
 		intc: interrupt-controller@9bc0000 {
-			compatible = "arm,gic-v3";
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
-- 
2.19.1

[PATCH AUTOSEL 4.14 07/36] DTS: CI20: Fix bugs in ci20's device tree.

[Sasha Levin]

From: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>

[ Upstream commit 1ca1c87f91d9dc50d6a38e2177b2032996e7901c ]

According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.

Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index a4cc52214dbdb..dad4aa0ebdd8c 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -54,7 +54,7 @@
 	status = "okay";
 
 	pinctrl-names = "default";
-	pinctrl-0 = <&pins_uart2>;
+	pinctrl-0 = <&pins_uart3>;
 };
 
 &uart4 {
@@ -174,9 +174,9 @@
 		bias-disable;
 	};
 
-	pins_uart2: uart2 {
-		function = "uart2";
-		groups = "uart2-data", "uart2-hwflow";
+	pins_uart3: uart3 {
+		function = "uart3";
+		groups = "uart3-data", "uart3-hwflow";
 		bias-disable;
 	};
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 08/36] usb: phy: fix link errors

[Sasha Levin]

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index aff702c0eb9fb..85a92d0813dd0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,7 +21,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
-- 
2.19.1

[PATCH AUTOSEL 4.14 09/36] irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]

Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.

It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.

Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mmp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 25f32e1d77647..3496b61a312ae 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -34,6 +34,9 @@
 #define SEL_INT_PENDING		(1 << 6)
 #define SEL_INT_NUM_MASK	0x3f
 
+#define MMP2_ICU_INT_ROUTE_PJ4_IRQ	(1 << 5)
+#define MMP2_ICU_INT_ROUTE_PJ4_FIQ	(1 << 6)
+
 struct icu_chip_data {
 	int			nr_irqs;
 	unsigned int		virq_base;
@@ -190,7 +193,8 @@ static const struct mmp_intc_conf mmp_conf = {
 static const struct mmp_intc_conf mmp2_conf = {
 	.conf_enable	= 0x20,
 	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
+	.conf_mask	= MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+			  MMP2_ICU_INT_ROUTE_PJ4_FIQ,
 };
 
 static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
-- 
2.19.1

[PATCH AUTOSEL 4.14 10/36] debugfs: return error values, not NULL

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ff9fb72bc07705c00795ca48631f7fffe24d2c6b ]

When an error happens, debugfs should return an error pointer value, not
NULL.  This will prevent the totally theoretical error where a debugfs
call fails due to lack of memory, returning NULL, and that dentry value
is then passed to another debugfs call, which would end up succeeding,
creating a file at the root of the debugfs tree, but would then be
impossible to remove (because you can not remove the directory NULL).

So, to make everyone happy, always return errors, this makes the users
of debugfs much simpler (they do not have to ever check the return
value), and everyone can rest easy.

Reported-by: Gary R Hook <ghook@amd.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Michal Hocko <mhocko@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/debugfs/inode.c | 39 ++++++++++++++++++++++-----------------
 1 file changed, 22 insertions(+), 17 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index ccfe1e1cb6bc3..0bbe2df9077c6 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -252,8 +252,8 @@ MODULE_ALIAS_FS("debugfs");
  * @parent: a pointer to the parent dentry of the file.
  *
  * This function will return a pointer to a dentry if it succeeds.  If the file
- * doesn't exist or an error occurs, %NULL will be returned.  The returned
- * dentry must be passed to dput() when it is no longer needed.
+ * doesn't exist or an error occurs, %ERR_PTR(-ERROR) will be returned.  The
+ * returned dentry must be passed to dput() when it is no longer needed.
  *
  * If debugfs is not enabled in the kernel, the value -%ENODEV will be
  * returned.
@@ -263,7 +263,7 @@ struct dentry *debugfs_lookup(const char *name, struct dentry *parent)
 	struct dentry *dentry;
 
 	if (IS_ERR(parent))
-		return NULL;
+		return parent;
 
 	if (!parent)
 		parent = debugfs_mount->mnt_root;
@@ -273,10 +273,10 @@ struct dentry *debugfs_lookup(const char *name, struct dentry *parent)
 	inode_unlock(d_inode(parent));
 
 	if (IS_ERR(dentry))
-		return NULL;
+		return dentry;
 	if (!d_really_is_positive(dentry)) {
 		dput(dentry);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 	return dentry;
 }
@@ -325,7 +325,7 @@ static struct dentry *failed_creating(struct dentry *dentry)
 	inode_unlock(d_inode(dentry->d_parent));
 	dput(dentry);
 	simple_release_fs(&debugfs_mount, &debugfs_mount_count);
-	return NULL;
+	return ERR_PTR(-ENOMEM);
 }
 
 static struct dentry *end_creating(struct dentry *dentry)
@@ -348,7 +348,7 @@ static struct dentry *__debugfs_create_file(const char *name, umode_t mode,
 	dentry = start_creating(name, parent);
 
 	if (IS_ERR(dentry))
-		return NULL;
+		return dentry;
 
 	inode = debugfs_get_inode(dentry->d_sb);
 	if (unlikely(!inode))
@@ -386,7 +386,8 @@ static struct dentry *__debugfs_create_file(const char *name, umode_t mode,
  * This function will return a pointer to a dentry if it succeeds.  This
  * pointer must be passed to the debugfs_remove() function when the file is
  * to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.)  If an error occurs, %NULL will be returned.
+ * you are responsible here.)  If an error occurs, %ERR_PTR(-ERROR) will be
+ * returned.
  *
  * If debugfs is not enabled in the kernel, the value -%ENODEV will be
  * returned.
@@ -464,7 +465,8 @@ EXPORT_SYMBOL_GPL(debugfs_create_file_unsafe);
  * This function will return a pointer to a dentry if it succeeds.  This
  * pointer must be passed to the debugfs_remove() function when the file is
  * to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.)  If an error occurs, %NULL will be returned.
+ * you are responsible here.)  If an error occurs, %ERR_PTR(-ERROR) will be
+ * returned.
  *
  * If debugfs is not enabled in the kernel, the value -%ENODEV will be
  * returned.
@@ -495,7 +497,8 @@ EXPORT_SYMBOL_GPL(debugfs_create_file_size);
  * This function will return a pointer to a dentry if it succeeds.  This
  * pointer must be passed to the debugfs_remove() function when the file is
  * to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.)  If an error occurs, %NULL will be returned.
+ * you are responsible here.)  If an error occurs, %ERR_PTR(-ERROR) will be
+ * returned.
  *
  * If debugfs is not enabled in the kernel, the value -%ENODEV will be
  * returned.
@@ -506,7 +509,7 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent)
 	struct inode *inode;
 
 	if (IS_ERR(dentry))
-		return NULL;
+		return dentry;
 
 	inode = debugfs_get_inode(dentry->d_sb);
 	if (unlikely(!inode))
@@ -545,7 +548,7 @@ struct dentry *debugfs_create_automount(const char *name,
 	struct inode *inode;
 
 	if (IS_ERR(dentry))
-		return NULL;
+		return dentry;
 
 	inode = debugfs_get_inode(dentry->d_sb);
 	if (unlikely(!inode))
@@ -581,8 +584,8 @@ EXPORT_SYMBOL(debugfs_create_automount);
  * This function will return a pointer to a dentry if it succeeds.  This
  * pointer must be passed to the debugfs_remove() function when the symbolic
  * link is to be removed (no automatic cleanup happens if your module is
- * unloaded, you are responsible here.)  If an error occurs, %NULL will be
- * returned.
+ * unloaded, you are responsible here.)  If an error occurs, %ERR_PTR(-ERROR)
+ * will be returned.
  *
  * If debugfs is not enabled in the kernel, the value -%ENODEV will be
  * returned.
@@ -594,12 +597,12 @@ struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 	struct inode *inode;
 	char *link = kstrdup(target, GFP_KERNEL);
 	if (!link)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	dentry = start_creating(name, parent);
 	if (IS_ERR(dentry)) {
 		kfree(link);
-		return NULL;
+		return dentry;
 	}
 
 	inode = debugfs_get_inode(dentry->d_sb);
@@ -806,7 +809,9 @@ struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
 	if (dentry && !IS_ERR(dentry))
 		dput(dentry);
 	unlock_rename(new_dir, old_dir);
-	return NULL;
+	if (IS_ERR(dentry))
+		return dentry;
+	return ERR_PTR(-EINVAL);
 }
 EXPORT_SYMBOL_GPL(debugfs_rename);
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 11/36] debugfs: debugfs_lookup() should return NULL if not found

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 37ea7b630ae5cdea4e8ff381d9d23abfef5939e6 ]

Lots of callers of debugfs_lookup() were just checking NULL to see if
the file/directory was found or not.  By changing this in ff9fb72bc077
("debugfs: return error values, not NULL") we caused some subsystems to
easily crash.

Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Reported-by: syzbot+b382ba6a802a3d242790@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/debugfs/inode.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 0bbe2df9077c6..377aec4ddab64 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -252,8 +252,8 @@ MODULE_ALIAS_FS("debugfs");
  * @parent: a pointer to the parent dentry of the file.
  *
  * This function will return a pointer to a dentry if it succeeds.  If the file
- * doesn't exist or an error occurs, %ERR_PTR(-ERROR) will be returned.  The
- * returned dentry must be passed to dput() when it is no longer needed.
+ * doesn't exist or an error occurs, %NULL will be returned.  The returned
+ * dentry must be passed to dput() when it is no longer needed.
  *
  * If debugfs is not enabled in the kernel, the value -%ENODEV will be
  * returned.
@@ -263,7 +263,7 @@ struct dentry *debugfs_lookup(const char *name, struct dentry *parent)
 	struct dentry *dentry;
 
 	if (IS_ERR(parent))
-		return parent;
+		return NULL;
 
 	if (!parent)
 		parent = debugfs_mount->mnt_root;
@@ -273,10 +273,10 @@ struct dentry *debugfs_lookup(const char *name, struct dentry *parent)
 	inode_unlock(d_inode(parent));
 
 	if (IS_ERR(dentry))
-		return dentry;
+		return NULL;
 	if (!d_really_is_positive(dentry)) {
 		dput(dentry);
-		return ERR_PTR(-EINVAL);
+		return NULL;
 	}
 	return dentry;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 12/36] net: stmmac: Fallback to Platform Data clock in Watchdog conversion

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ]

If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   | 14 ++++++++++----
 include/linux/stmmac.h                             |  1 +
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index c3c6335cbe9ae..ecddd9948788a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -702,8 +702,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
 {
 	unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
 
-	if (!clk)
-		return 0;
+	if (!clk) {
+		clk = priv->plat->clk_ref_rate;
+		if (!clk)
+			return 0;
+	}
 
 	return (usec * (clk / 1000000)) / 256;
 }
@@ -712,8 +715,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv)
 {
 	unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
 
-	if (!clk)
-		return 0;
+	if (!clk) {
+		clk = priv->plat->clk_ref_rate;
+		if (!clk)
+			return 0;
+	}
 
 	return (riwt * 256) / (clk / 1000000);
 }
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 32feac5bbd75b..5844105a482bc 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -183,6 +183,7 @@ struct plat_stmmacenet_data {
 	struct clk *pclk;
 	struct clk *clk_ptp_ref;
 	unsigned int clk_ptp_rate;
+	unsigned int clk_ref_rate;
 	struct reset_control *stmmac_rst;
 	struct stmmac_axi *axi;
 	int has_gmac4;
-- 
2.19.1

[PATCH AUTOSEL 4.14 13/36] net: stmmac: Send TSO packets always from Queue 0

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit c5acdbee22a1b200dde07effd26fd1f649e9ab8a ]

The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.

Lets always send TSO packets from Queue 0.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a901feaad4e15..bed71e295d9ff 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3019,8 +3019,17 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Manage oversized TCP frames for GMAC4 device */
 	if (skb_is_gso(skb) && priv->tso) {
-		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
+		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
+			/*
+			 * There is no way to determine the number of TSO
+			 * capable Queues. Let's use always the Queue 0
+			 * because if TSO is supported then at least this
+			 * one will be capable.
+			 */
+			skb_set_queue_mapping(skb, 0);
+
 			return stmmac_tso_xmit(skb, dev);
+		}
 	}
 
 	if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
-- 
2.19.1

[PATCH AUTOSEL 4.14 14/36] net: stmmac: Disable EEE mode earlier in XMIT callback

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit e2cd682deb231ba6f80524bb84e57e7138261149 ]

In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.

Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index bed71e295d9ff..cd6d0045c39f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3017,6 +3017,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_q = &priv->tx_queue[queue];
 
+	if (priv->tx_path_in_lpi_mode)
+		stmmac_disable_eee_mode(priv);
+
 	/* Manage oversized TCP frames for GMAC4 device */
 	if (skb_is_gso(skb) && priv->tso) {
 		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
@@ -3044,9 +3047,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 
-	if (priv->tx_path_in_lpi_mode)
-		stmmac_disable_eee_mode(priv);
-
 	entry = tx_q->cur_tx;
 	first_entry = entry;
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 15/36] irqchip/gic-v3-its: Fix ITT_entry_size accessor

[Sasha Levin]

From: Zenghui Yu <yuzenghui@huawei.com>

[ Upstream commit 56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.

Fixes: 3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/irqchip/arm-gic-v3.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index bacb499c512c7..845ff8c51564c 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -306,7 +306,7 @@
 #define GITS_TYPER_PLPIS		(1UL << 0)
 #define GITS_TYPER_VLPIS		(1UL << 1)
 #define GITS_TYPER_ITT_ENTRY_SIZE_SHIFT	4
-#define GITS_TYPER_ITT_ENTRY_SIZE(r)	((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0x1f) + 1)
+#define GITS_TYPER_ITT_ENTRY_SIZE(r)	((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0xf) + 1)
 #define GITS_TYPER_IDBITS_SHIFT		8
 #define GITS_TYPER_DEVBITS_SHIFT	13
 #define GITS_TYPER_DEVBITS(r)		((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)
-- 
2.19.1

[PATCH AUTOSEL 4.14 16/36] relay: check return of create_buf_file() properly

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2c1cf00eeacb784781cf1c9896b8af001246d339 ]

If create_buf_file() returns an error, don't try to reference it later
as a valid dentry pointer.

This problem was exposed when debugfs started to return errors instead
of just NULL for some calls when they do not succeed properly.

Also, the check for WARN_ON(dentry) was just wrong :)

Reported-by: Kees Cook <keescook@chromium.org>
Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/relay.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/relay.c b/kernel/relay.c
index 1537158c67b38..61d37e6da22dd 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -427,6 +427,8 @@ static struct dentry *relay_create_buf_file(struct rchan *chan,
 	dentry = chan->cb->create_buf_file(tmpname, chan->parent,
 					   S_IRUSR, buf,
 					   &chan->is_global);
+	if (IS_ERR(dentry))
+		dentry = NULL;
 
 	kfree(tmpname);
 
@@ -460,7 +462,7 @@ static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu)
 		dentry = chan->cb->create_buf_file(NULL, NULL,
 						   S_IRUSR, buf,
 						   &chan->is_global);
-		if (WARN_ON(dentry))
+		if (IS_ERR_OR_NULL(dentry))
 			goto free_buf;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 17/36] blk-mq: protect debugfs_create_files() from failures

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 36991ca68db9dd43bac7f3519f080ee3939263ef ]

If debugfs were to return a non-NULL error for a debugfs call, using
that pointer later in debugfs_create_files() would crash.

Fix that by properly checking the pointer before referencing it.

Reported-by: Michal Hocko <mhocko@kernel.org>
Reported-and-tested-by: syzbot+b382ba6a802a3d242790@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-debugfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index d95439154556d..da0453277f7f2 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -791,6 +791,9 @@ static const struct blk_mq_debugfs_attr blk_mq_debugfs_ctx_attrs[] = {
 static bool debugfs_create_files(struct dentry *parent, void *data,
 				 const struct blk_mq_debugfs_attr *attr)
 {
+	if (IS_ERR_OR_NULL(parent))
+		return false;
+
 	d_inode(parent)->i_private = data;
 
 	for (; attr->name; attr++) {
-- 
2.19.1

[PATCH AUTOSEL 4.14 18/36] bpf, selftests: fix handling of sparse CPU allocations

[Sasha Levin]

From: Martynas Pumputis <m@lambda.lt>

[ Upstream commit 1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ]

Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.

E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.

This patch fixes the function by making it parse all CPU ranges and
elements.

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/bpf_util.h | 30 +++++++++++++++++---------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/bpf/bpf_util.h b/tools/testing/selftests/bpf/bpf_util.h
index d0811b3d6a6f1..4bf7203649344 100644
--- a/tools/testing/selftests/bpf/bpf_util.h
+++ b/tools/testing/selftests/bpf/bpf_util.h
@@ -13,7 +13,7 @@ static inline unsigned int bpf_num_possible_cpus(void)
 	unsigned int start, end, possible_cpus = 0;
 	char buff[128];
 	FILE *fp;
-	int n;
+	int len, n, i, j = 0;
 
 	fp = fopen(fcpu, "r");
 	if (!fp) {
@@ -21,17 +21,27 @@ static inline unsigned int bpf_num_possible_cpus(void)
 		exit(1);
 	}
 
-	while (fgets(buff, sizeof(buff), fp)) {
-		n = sscanf(buff, "%u-%u", &start, &end);
-		if (n == 0) {
-			printf("Failed to retrieve # possible CPUs!\n");
-			exit(1);
-		} else if (n == 1) {
-			end = start;
+	if (!fgets(buff, sizeof(buff), fp)) {
+		printf("Failed to read %s!\n", fcpu);
+		exit(1);
+	}
+
+	len = strlen(buff);
+	for (i = 0; i <= len; i++) {
+		if (buff[i] == ',' || buff[i] == '\0') {
+			buff[i] = '\0';
+			n = sscanf(&buff[j], "%u-%u", &start, &end);
+			if (n <= 0) {
+				printf("Failed to retrieve # possible CPUs!\n");
+				exit(1);
+			} else if (n == 1) {
+				end = start;
+			}
+			possible_cpus += end - start + 1;
+			j = i + 1;
 		}
-		possible_cpus = start == 0 ? end + 1 : 0;
-		break;
 	}
+
 	fclose(fp);
 
 	return possible_cpus;
-- 
2.19.1

[PATCH AUTOSEL 4.14 19/36] bpf: fix lockdep false positive in percpu_freelist

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit a89fac57b5d080771efd4d71feaae19877cf68f0 ]

Lockdep warns about false positive:
[   12.492084] 00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40
[   12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past:
[   12.493275]  (&rq->lock){-.-.}
[   12.493276]
[   12.493276]
[   12.493276] and interrupts could create inverse lock ordering between them.
[   12.493276]
[   12.494435]
[   12.494435] other info that might help us debug this:
[   12.494979]  Possible interrupt unsafe locking scenario:
[   12.494979]
[   12.495518]        CPU0                    CPU1
[   12.495879]        ----                    ----
[   12.496243]   lock(&head->lock);
[   12.496502]                                local_irq_disable();
[   12.496969]                                lock(&rq->lock);
[   12.497431]                                lock(&head->lock);
[   12.497890]   <Interrupt>
[   12.498104]     lock(&rq->lock);
[   12.498368]
[   12.498368]  *** DEADLOCK ***
[   12.498368]
[   12.498837] 1 lock held by dd/276:
[   12.499110]  #0: 00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240
[   12.499747]
[   12.499747] the shortest dependencies between 2nd lock and 1st lock:
[   12.500389]  -> (&rq->lock){-.-.} {
[   12.500669]     IN-HARDIRQ-W at:
[   12.500934]                       _raw_spin_lock+0x2f/0x40
[   12.501373]                       scheduler_tick+0x4c/0xf0
[   12.501812]                       update_process_times+0x40/0x50
[   12.502294]                       tick_periodic+0x27/0xb0
[   12.502723]                       tick_handle_periodic+0x1f/0x60
[   12.503203]                       timer_interrupt+0x11/0x20
[   12.503651]                       __handle_irq_event_percpu+0x43/0x2c0
[   12.504167]                       handle_irq_event_percpu+0x20/0x50
[   12.504674]                       handle_irq_event+0x37/0x60
[   12.505139]                       handle_level_irq+0xa7/0x120
[   12.505601]                       handle_irq+0xa1/0x150
[   12.506018]                       do_IRQ+0x77/0x140
[   12.506411]                       ret_from_intr+0x0/0x1d
[   12.506834]                       _raw_spin_unlock_irqrestore+0x53/0x60
[   12.507362]                       __setup_irq+0x481/0x730
[   12.507789]                       setup_irq+0x49/0x80
[   12.508195]                       hpet_time_init+0x21/0x32
[   12.508644]                       x86_late_time_init+0xb/0x16
[   12.509106]                       start_kernel+0x390/0x42a
[   12.509554]                       secondary_startup_64+0xa4/0xb0
[   12.510034]     IN-SOFTIRQ-W at:
[   12.510305]                       _raw_spin_lock+0x2f/0x40
[   12.510772]                       try_to_wake_up+0x1c7/0x4e0
[   12.511220]                       swake_up_locked+0x20/0x40
[   12.511657]                       swake_up_one+0x1a/0x30
[   12.512070]                       rcu_process_callbacks+0xc5/0x650
[   12.512553]                       __do_softirq+0xe6/0x47b
[   12.512978]                       irq_exit+0xc3/0xd0
[   12.513372]                       smp_apic_timer_interrupt+0xa9/0x250
[   12.513876]                       apic_timer_interrupt+0xf/0x20
[   12.514343]                       default_idle+0x1c/0x170
[   12.514765]                       do_idle+0x199/0x240
[   12.515159]                       cpu_startup_entry+0x19/0x20
[   12.515614]                       start_kernel+0x422/0x42a
[   12.516045]                       secondary_startup_64+0xa4/0xb0
[   12.516521]     INITIAL USE at:
[   12.516774]                      _raw_spin_lock_irqsave+0x38/0x50
[   12.517258]                      rq_attach_root+0x16/0xd0
[   12.517685]                      sched_init+0x2f2/0x3eb
[   12.518096]                      start_kernel+0x1fb/0x42a
[   12.518525]                      secondary_startup_64+0xa4/0xb0
[   12.518986]   }
[   12.519132]   ... key      at: [<ffffffff82b7bc28>] __key.71384+0x0/0x8
[   12.519649]   ... acquired at:
[   12.519892]    pcpu_freelist_pop+0x7b/0xd0
[   12.520221]    bpf_get_stackid+0x1d2/0x4d0
[   12.520563]    ___bpf_prog_run+0x8b4/0x11a0
[   12.520887]
[   12.521008] -> (&head->lock){+...} {
[   12.521292]    HARDIRQ-ON-W at:
[   12.521539]                     _raw_spin_lock+0x2f/0x40
[   12.521950]                     pcpu_freelist_push+0x2a/0x40
[   12.522396]                     bpf_get_stackid+0x494/0x4d0
[   12.522828]                     ___bpf_prog_run+0x8b4/0x11a0
[   12.523296]    INITIAL USE at:
[   12.523537]                    _raw_spin_lock+0x2f/0x40
[   12.523944]                    pcpu_freelist_populate+0xc0/0x120
[   12.524417]                    htab_map_alloc+0x405/0x500
[   12.524835]                    __do_sys_bpf+0x1a3/0x1a90
[   12.525253]                    do_syscall_64+0x4a/0x180
[   12.525659]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   12.526167]  }
[   12.526311]  ... key      at: [<ffffffff838f7668>] __key.13130+0x0/0x8
[   12.526812]  ... acquired at:
[   12.527047]    __lock_acquire+0x521/0x1350
[   12.527371]    lock_acquire+0x98/0x190
[   12.527680]    _raw_spin_lock+0x2f/0x40
[   12.527994]    pcpu_freelist_push+0x2a/0x40
[   12.528325]    bpf_get_stackid+0x494/0x4d0
[   12.528645]    ___bpf_prog_run+0x8b4/0x11a0
[   12.528970]
[   12.529092]
[   12.529092] stack backtrace:
[   12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f892422 #475
[   12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   12.530750] Call Trace:
[   12.530948]  dump_stack+0x5f/0x8b
[   12.531248]  check_usage_backwards+0x10c/0x120
[   12.531598]  ? ___bpf_prog_run+0x8b4/0x11a0
[   12.531935]  ? mark_lock+0x382/0x560
[   12.532229]  mark_lock+0x382/0x560
[   12.532496]  ? print_shortest_lock_dependencies+0x180/0x180
[   12.532928]  __lock_acquire+0x521/0x1350
[   12.533271]  ? find_get_entry+0x17f/0x2e0
[   12.533586]  ? find_get_entry+0x19c/0x2e0
[   12.533902]  ? lock_acquire+0x98/0x190
[   12.534196]  lock_acquire+0x98/0x190
[   12.534482]  ? pcpu_freelist_push+0x2a/0x40
[   12.534810]  _raw_spin_lock+0x2f/0x40
[   12.535099]  ? pcpu_freelist_push+0x2a/0x40
[   12.535432]  pcpu_freelist_push+0x2a/0x40
[   12.535750]  bpf_get_stackid+0x494/0x4d0
[   12.536062]  ___bpf_prog_run+0x8b4/0x11a0

It has been explained that is a false positive here:
https://lkml.org/lkml/2018/7/25/756
Recap:
- stackmap uses pcpu_freelist
- The lock in pcpu_freelist is a percpu lock
- stackmap is only used by tracing bpf_prog
- A tracing bpf_prog cannot be run if another bpf_prog
  has already been running (ensured by the percpu bpf_prog_active counter).

Eric pointed out that this lockdep splats stops other
legit lockdep splats in selftests/bpf/test_progs.c.

Fix this by calling local_irq_save/restore for stackmap.

Another false positive had also been worked around by calling
local_irq_save in commit 89ad2fa3f043 ("bpf: fix lockdep splat").
That commit added unnecessary irq_save/restore to fast path of
bpf hash map. irqs are already disabled at that point, since htab
is holding per bucket spin_lock with irqsave.

Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop
function w/o irqsave and convert pcpu_freelist_push/pop to irqsave
to be used elsewhere (right now only in stackmap).
It stops lockdep false positive in stackmap with a bit of acceptable overhead.

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c         |  4 ++--
 kernel/bpf/percpu_freelist.c | 41 +++++++++++++++++++++++++-----------
 kernel/bpf/percpu_freelist.h |  4 ++++
 3 files changed, 35 insertions(+), 14 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 3d0ecc273cc64..84237f640789d 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -655,7 +655,7 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
 	}
 
 	if (htab_is_prealloc(htab)) {
-		pcpu_freelist_push(&htab->freelist, &l->fnode);
+		__pcpu_freelist_push(&htab->freelist, &l->fnode);
 	} else {
 		atomic_dec(&htab->count);
 		l->htab = htab;
@@ -717,7 +717,7 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key,
 		} else {
 			struct pcpu_freelist_node *l;
 
-			l = pcpu_freelist_pop(&htab->freelist);
+			l = __pcpu_freelist_pop(&htab->freelist);
 			if (!l)
 				return ERR_PTR(-E2BIG);
 			l_new = container_of(l, struct htab_elem, fnode);
diff --git a/kernel/bpf/percpu_freelist.c b/kernel/bpf/percpu_freelist.c
index 673fa6fe2d73c..0c1b4ba9e90e7 100644
--- a/kernel/bpf/percpu_freelist.c
+++ b/kernel/bpf/percpu_freelist.c
@@ -28,8 +28,8 @@ void pcpu_freelist_destroy(struct pcpu_freelist *s)
 	free_percpu(s->freelist);
 }
 
-static inline void __pcpu_freelist_push(struct pcpu_freelist_head *head,
-					struct pcpu_freelist_node *node)
+static inline void ___pcpu_freelist_push(struct pcpu_freelist_head *head,
+					 struct pcpu_freelist_node *node)
 {
 	raw_spin_lock(&head->lock);
 	node->next = head->first;
@@ -37,12 +37,22 @@ static inline void __pcpu_freelist_push(struct pcpu_freelist_head *head,
 	raw_spin_unlock(&head->lock);
 }
 
-void pcpu_freelist_push(struct pcpu_freelist *s,
+void __pcpu_freelist_push(struct pcpu_freelist *s,
 			struct pcpu_freelist_node *node)
 {
 	struct pcpu_freelist_head *head = this_cpu_ptr(s->freelist);
 
-	__pcpu_freelist_push(head, node);
+	___pcpu_freelist_push(head, node);
+}
+
+void pcpu_freelist_push(struct pcpu_freelist *s,
+			struct pcpu_freelist_node *node)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__pcpu_freelist_push(s, node);
+	local_irq_restore(flags);
 }
 
 void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
@@ -63,7 +73,7 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 	for_each_possible_cpu(cpu) {
 again:
 		head = per_cpu_ptr(s->freelist, cpu);
-		__pcpu_freelist_push(head, buf);
+		___pcpu_freelist_push(head, buf);
 		i++;
 		buf += elem_size;
 		if (i == nr_elems)
@@ -74,14 +84,12 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 	local_irq_restore(flags);
 }
 
-struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *s)
 {
 	struct pcpu_freelist_head *head;
 	struct pcpu_freelist_node *node;
-	unsigned long flags;
 	int orig_cpu, cpu;
 
-	local_irq_save(flags);
 	orig_cpu = cpu = raw_smp_processor_id();
 	while (1) {
 		head = per_cpu_ptr(s->freelist, cpu);
@@ -89,16 +97,25 @@ struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
 		node = head->first;
 		if (node) {
 			head->first = node->next;
-			raw_spin_unlock_irqrestore(&head->lock, flags);
+			raw_spin_unlock(&head->lock);
 			return node;
 		}
 		raw_spin_unlock(&head->lock);
 		cpu = cpumask_next(cpu, cpu_possible_mask);
 		if (cpu >= nr_cpu_ids)
 			cpu = 0;
-		if (cpu == orig_cpu) {
-			local_irq_restore(flags);
+		if (cpu == orig_cpu)
 			return NULL;
-		}
 	}
 }
+
+struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
+{
+	struct pcpu_freelist_node *ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = __pcpu_freelist_pop(s);
+	local_irq_restore(flags);
+	return ret;
+}
diff --git a/kernel/bpf/percpu_freelist.h b/kernel/bpf/percpu_freelist.h
index 3049aae8ea1e2..c3960118e6178 100644
--- a/kernel/bpf/percpu_freelist.h
+++ b/kernel/bpf/percpu_freelist.h
@@ -22,8 +22,12 @@ struct pcpu_freelist_node {
 	struct pcpu_freelist_node *next;
 };
 
+/* pcpu_freelist_* do spin_lock_irqsave. */
 void pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
 struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *);
+/* __pcpu_freelist_* do spin_lock only. caller must disable irqs. */
+void __pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *);
 void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 			    u32 nr_elems);
 int pcpu_freelist_init(struct pcpu_freelist *);
-- 
2.19.1

[PATCH AUTOSEL 4.14 20/36] drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

[Sasha Levin]

From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 7b909d814d38c..095bd6b4ae80d 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -371,6 +371,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 		dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
 		return PTR_ERR(tcon->sclk0);
 	}
+	clk_prepare_enable(tcon->sclk0);
 
 	if (tcon->quirks->has_channel_1) {
 		tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
@@ -385,6 +386,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 
 static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon)
 {
+	clk_disable_unprepare(tcon->sclk0);
 	clk_disable_unprepare(tcon->clk);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 21/36] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

[Sasha Levin]

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 94236ec9d4100..4db2cd1c611de 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1580,8 +1581,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1589,15 +1590,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock_bh(&atchan->lock);
@@ -1652,7 +1653,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1666,7 +1667,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);
-- 
2.19.1

[PATCH AUTOSEL 4.14 22/36] vsock/virtio: fix kernel panic after device hot-unplug

[Sasha Levin]

From: Stefano Garzarella <sgarzare@redhat.com>

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index fdb294441682b..8cdf6ddec9b7d 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -75,6 +75,9 @@ static u32 virtio_transport_get_local_cid(void)
 {
 	struct virtio_vsock *vsock = virtio_vsock_get();
 
+	if (!vsock)
+		return VMADDR_CID_ANY;
+
 	return vsock->guest_cid;
 }
 
@@ -584,10 +587,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 
 	virtio_vsock_update_guest_cid(vsock);
 
-	ret = vsock_core_init(&virtio_transport.transport);
-	if (ret < 0)
-		goto out_vqs;
-
 	vsock->rx_buf_nr = 0;
 	vsock->rx_buf_max_nr = 0;
 	atomic_set(&vsock->queued_replies, 0);
@@ -618,8 +617,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 	mutex_unlock(&the_virtio_vsock_mutex);
 	return 0;
 
-out_vqs:
-	vsock->vdev->config->del_vqs(vsock->vdev);
 out:
 	kfree(vsock);
 	mutex_unlock(&the_virtio_vsock_mutex);
@@ -669,7 +666,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 
 	mutex_lock(&the_virtio_vsock_mutex);
 	the_virtio_vsock = NULL;
-	vsock_core_exit();
 	mutex_unlock(&the_virtio_vsock_mutex);
 
 	vdev->config->del_vqs(vdev);
@@ -702,14 +698,28 @@ static int __init virtio_vsock_init(void)
 	virtio_vsock_workqueue = alloc_workqueue("virtio_vsock", 0, 0);
 	if (!virtio_vsock_workqueue)
 		return -ENOMEM;
+
 	ret = register_virtio_driver(&virtio_vsock_driver);
 	if (ret)
-		destroy_workqueue(virtio_vsock_workqueue);
+		goto out_wq;
+
+	ret = vsock_core_init(&virtio_transport.transport);
+	if (ret)
+		goto out_vdr;
+
+	return 0;
+
+out_vdr:
+	unregister_virtio_driver(&virtio_vsock_driver);
+out_wq:
+	destroy_workqueue(virtio_vsock_workqueue);
 	return ret;
+
 }
 
 static void __exit virtio_vsock_exit(void)
 {
+	vsock_core_exit();
 	unregister_virtio_driver(&virtio_vsock_driver);
 	destroy_workqueue(virtio_vsock_workqueue);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 23/36] vsock/virtio: reset connected sockets on device removal

[Sasha Levin]

From: Stefano Garzarella <sgarzare@redhat.com>

[ Upstream commit 85965487abc540368393a15491e6e7fcd230039d ]

When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 8cdf6ddec9b7d..2ff751eba037d 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -634,6 +634,9 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 	flush_work(&vsock->event_work);
 	flush_work(&vsock->send_pkt_work);
 
+	/* Reset all connected sockets when the device disappear */
+	vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+
 	vdev->config->reset(vdev);
 
 	mutex_lock(&vsock->rx_lock);
-- 
2.19.1

[PATCH AUTOSEL 4.14 24/36] dmaengine: dmatest: Abort test in case of mapping error

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.

[  222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[  240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[  240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[  240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmatest.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 80cc2be6483cb..e393361277415 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -626,11 +626,9 @@ static int dmatest_func(void *data)
 			srcs[i] = um->addr[i] + src_off;
 			ret = dma_mapping_error(dev->dev, um->addr[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("src mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->to_cnt++;
 		}
@@ -645,11 +643,9 @@ static int dmatest_func(void *data)
 					       DMA_BIDIRECTIONAL);
 			ret = dma_mapping_error(dev->dev, dsts[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("dst mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->bidi_cnt++;
 		}
@@ -679,12 +675,10 @@ static int dmatest_func(void *data)
 		}
 
 		if (!tx) {
-			dmaengine_unmap_put(um);
 			result("prep error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		done->done = false;
@@ -693,12 +687,10 @@ static int dmatest_func(void *data)
 		cookie = tx->tx_submit(tx);
 
 		if (dma_submit_error(cookie)) {
-			dmaengine_unmap_put(um);
 			result("submit error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 		dma_async_issue_pending(chan);
 
@@ -711,16 +703,14 @@ static int dmatest_func(void *data)
 			dmaengine_unmap_put(um);
 			result("test timed out", total_tests, src_off, dst_off,
 			       len, 0);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		} else if (status != DMA_COMPLETE) {
 			dmaengine_unmap_put(um);
 			result(status == DMA_ERROR ?
 			       "completion error status" :
 			       "completion busy status", total_tests, src_off,
 			       dst_off, len, ret);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		dmaengine_unmap_put(um);
@@ -765,6 +755,12 @@ static int dmatest_func(void *data)
 			verbose_result("test passed", total_tests, src_off,
 				       dst_off, len, 0);
 		}
+
+		continue;
+
+error_unmap_continue:
+		dmaengine_unmap_put(um);
+		failed_tests++;
 	}
 	ktime = ktime_sub(ktime_get(), ktime);
 	ktime = ktime_sub(ktime, comparetime);
-- 
2.19.1

[PATCH AUTOSEL 4.14 25/36] selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

[Sasha Levin]

From: Naresh Kamboju <naresh.kamboju@linaro.org>

[ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ]

In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y

Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/config | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
index 1017313e41a85..59caa8f71cd80 100644
--- a/tools/testing/selftests/netfilter/config
+++ b/tools/testing/selftests/netfilter/config
@@ -1,2 +1,2 @@
 CONFIG_NET_NS=y
-NF_TABLES_INET=y
+CONFIG_NF_TABLES_INET=y
-- 
2.19.1

[PATCH AUTOSEL 4.14 26/36] selftests: netfilter: add simple masq/redirect test cases

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/Makefile   |   2 +-
 tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++
 2 files changed, 763 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 47ed6cef93fb8..c9ff2b47bd1ca 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for netfilter selftests
 
-TEST_PROGS := nft_trans_stress.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
new file mode 100755
index 0000000000000..8ec76681605cc
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -0,0 +1,762 @@
+#!/bin/bash
+#
+# This test is for basic NAT functionality: snat, dnat, redirect, masquerade.
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add ns0
+ip netns add ns1
+ip netns add ns2
+
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+
+ip -net ns0 link set lo up
+ip -net ns0 link set veth0 up
+ip -net ns0 addr add 10.0.1.1/24 dev veth0
+ip -net ns0 addr add dead:1::1/64 dev veth0
+
+ip -net ns0 link set veth1 up
+ip -net ns0 addr add 10.0.2.1/24 dev veth1
+ip -net ns0 addr add dead:2::1/64 dev veth1
+
+for i in 1 2; do
+  ip -net ns$i link set lo up
+  ip -net ns$i link set eth0 up
+  ip -net ns$i addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i route add default via 10.0.$i.1
+  ip -net ns$i addr add dead:$i::99/64 dev eth0
+  ip -net ns$i route add default via dead:$i::1
+done
+
+bad_counter()
+{
+	local ns=$1
+	local counter=$2
+	local expect=$3
+
+	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+	ip netns exec $ns nft list counter inet filter $counter 1>&2
+}
+
+check_counters()
+{
+	ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in "packets 1 bytes 84"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out "packets 1 bytes 84"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in6 "$expect"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out6 "$expect"
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_ns0_counters()
+{
+	local ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0in "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0in6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0out "packets 0 bytes 0"
+		lret=1
+	fi
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0out6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	for dir in "in" "out" ; do
+		expect="packets 1 bytes 84"
+		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 $ns$dir "$expect"
+			lret=1
+		fi
+
+		expect="packets 1 bytes 104"
+		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 $ns$dir6 "$expect"
+			lret=1
+		fi
+	done
+
+	return $lret
+}
+
+reset_counters()
+{
+	for i in 0 1 2;do
+		ip netns exec ns$i nft reset counters inet > /dev/null
+	done
+}
+
+test_local_dnat6()
+{
+	local lret=0
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip6 daddr dead:1::99 dnat to dead:2::99
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add ip6 dnat hook"
+		return $ksft_skip
+	fi
+
+	# ping netns1, expect rewrite to netns2
+	ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping6 failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2"
+	ip netns exec ns0 nft flush chain ip6 nat output
+
+	return $lret
+}
+
+test_local_dnat()
+{
+	local lret=0
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip daddr 10.0.1.99 dnat to 10.0.2.99
+	}
+}
+EOF
+	# ping netns1, expect rewrite to netns2
+	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2"
+
+	ip netns exec ns0 nft flush chain ip nat output
+
+	reset_counters
+	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 count in ns1
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 packet in ns2
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush"
+
+	return $lret
+}
+
+
+test_masquerade6()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+		return 1
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft flush chain ip6 nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush ip6 nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2"
+
+	return $lret
+}
+
+test_masquerade()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: canot ping ns1 from ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft flush chain ip nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP masquerade for ns2"
+
+	return $lret
+}
+
+test_redirect6()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft delete table ip6 nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete ip6 nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2"
+
+	return $lret
+}
+
+test_redirect()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft delete table ip nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP redirection for ns2"
+
+	return $lret
+}
+
+
+# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+for i in 0 1 2; do
+ip netns exec ns$i nft -f - <<EOF
+table inet filter {
+	counter ns0in {}
+	counter ns1in {}
+	counter ns2in {}
+
+	counter ns0out {}
+	counter ns1out {}
+	counter ns2out {}
+
+	counter ns0in6 {}
+	counter ns1in6 {}
+	counter ns2in6 {}
+
+	counter ns0out6 {}
+	counter ns1out6 {}
+	counter ns2out6 {}
+
+	map nsincounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0in",
+			     10.0.2.1 : "ns0in",
+			     10.0.1.99 : "ns1in",
+			     10.0.2.99 : "ns2in" }
+	}
+
+	map nsincounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0in6",
+			     dead:2::1 : "ns0in6",
+			     dead:1::99 : "ns1in6",
+			     dead:2::99 : "ns2in6" }
+	}
+
+	map nsoutcounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0out",
+			     10.0.2.1 : "ns0out",
+			     10.0.1.99: "ns1out",
+			     10.0.2.99: "ns2out" }
+	}
+
+	map nsoutcounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0out6",
+			     dead:2::1 : "ns0out6",
+			     dead:1::99 : "ns1out6",
+			     dead:2::99 : "ns2out6" }
+	}
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+		counter name ip saddr map @nsincounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		counter name ip daddr map @nsoutcounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6
+	}
+}
+EOF
+done
+
+sleep 3
+# test basic connectivity
+for i in 1 2; do
+  ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+  if [ $? -ne 0 ];then
+  	echo "ERROR: Could not reach other namespace(s)" 1>&2
+	ret=1
+  fi
+
+  ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+  if [ $? -ne 0 ];then
+	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
+	ret=1
+  fi
+  check_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+
+  check_ns0_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+  reset_counters
+done
+
+if [ $ret -eq 0 ];then
+	echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+fi
+
+reset_counters
+test_local_dnat
+test_local_dnat6
+
+reset_counters
+test_masquerade
+test_masquerade6
+
+reset_counters
+test_redirect
+test_redirect6
+
+for i in 0 1 2; do ip netns del ns$i;done
+
+exit $ret
-- 
2.19.1

[PATCH AUTOSEL 4.14 27/36] netfilter: nf_nat: skip nat clash resolution for same-origin entries

[Sasha Levin]

From: Martynas Pumputis <martynas@weave.works>

[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index b793b55d14885..f07357ba96299 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -869,6 +869,22 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple,
 		}
 
 		if (nf_ct_key_equal(h, tuple, zone, net)) {
+			/* Tuple is taken already, so caller will need to find
+			 * a new source port to use.
+			 *
+			 * Only exception:
+			 * If the *original tuples* are identical, then both
+			 * conntracks refer to the same flow.
+			 * This is a rare situation, it can occur e.g. when
+			 * more than one UDP packet is sent from same socket
+			 * in different threads.
+			 *
+			 * Let nf_ct_resolve_clash() deal with this later.
+			 */
+			if (nf_ct_tuple_equal(&ignored_conntrack->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+					      &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple))
+				continue;
+
 			NF_CT_STAT_INC_ATOMIC(net, found);
 			rcu_read_unlock();
 			return 1;
-- 
2.19.1

[PATCH AUTOSEL 4.14 28/36] s390/qeth: fix use-after-free in error path

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]

The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.

Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 69ef5f4060edb..6566fceef38d5 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2472,11 +2472,12 @@ static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *q, int bidx)
 	return rc;
 }
 
-static void qeth_free_qdio_out_buf(struct qeth_qdio_out_q *q)
+static void qeth_free_output_queue(struct qeth_qdio_out_q *q)
 {
 	if (!q)
 		return;
 
+	qeth_clear_outq_buffers(q, 1);
 	qdio_free_buffers(q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q);
 	kfree(q);
 }
@@ -2549,10 +2550,8 @@ static int qeth_alloc_qdio_buffers(struct qeth_card *card)
 		card->qdio.out_qs[i]->bufs[j] = NULL;
 	}
 out_freeoutq:
-	while (i > 0) {
-		qeth_free_qdio_out_buf(card->qdio.out_qs[--i]);
-		qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-	}
+	while (i > 0)
+		qeth_free_output_queue(card->qdio.out_qs[--i]);
 	kfree(card->qdio.out_qs);
 	card->qdio.out_qs = NULL;
 out_freepool:
@@ -2585,10 +2584,8 @@ static void qeth_free_qdio_buffers(struct qeth_card *card)
 	qeth_free_buffer_pool(card);
 	/* free outbound qdio_qs */
 	if (card->qdio.out_qs) {
-		for (i = 0; i < card->qdio.no_out_queues; ++i) {
-			qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-			qeth_free_qdio_out_buf(card->qdio.out_qs[i]);
-		}
+		for (i = 0; i < card->qdio.no_out_queues; i++)
+			qeth_free_output_queue(card->qdio.out_qs[i]);
 		kfree(card->qdio.out_qs);
 		card->qdio.out_qs = NULL;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.14 29/36] perf symbols: Filter out hidden symbols from labels

[Sasha Levin]

From: Jiri Olsa <jolsa@redhat.com>

[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]

When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:

  # nm perf | grep annobin | head -10
  0000000000241100 t .annobin_annotate.c
  0000000000326490 t .annobin_annotate.c
  0000000000249255 t .annobin_annotate.c_end
  00000000003283a8 t .annobin_annotate.c_end
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bc3e2 t .annobin_annotate.c_end.unlikely
  00000000001bc400 t .annobin_annotate.c_end.unlikely
  00000000001bce18 t .annobin_annotate.c.hot
  00000000001bce18 t .annobin_annotate.c.hot
  ...

Those symbols have no use for report or annotation and should be
skipped.  Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:

  # perf test dwarf -v
  59: Test dwarf unwind                                     :
  --- start ---
  test child forked, pid 8515
  unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
  ...
  got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
  unwind: failed with 'no error'

The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:

  # readelf -s ./perf | grep annobin | head -1
    40: 00000000001bce4f     0 NOTYPE  LOCAL  HIDDEN    13 .annobin_init.c

They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.

>   Just to be awkward, if you are going to ignore STV_HIDDEN
>   symbols then you should probably also ignore STV_INTERNAL ones
>   as well...  Annobin does not generate them, but you never know,
>   one day some other tool might create some.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 8ad4296de98b0..3d39332b3a06a 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -87,6 +87,11 @@ static inline uint8_t elf_sym__type(const GElf_Sym *sym)
 	return GELF_ST_TYPE(sym->st_info);
 }
 
+static inline uint8_t elf_sym__visibility(const GElf_Sym *sym)
+{
+	return GELF_ST_VISIBILITY(sym->st_other);
+}
+
 #ifndef STT_GNU_IFUNC
 #define STT_GNU_IFUNC 10
 #endif
@@ -111,7 +116,9 @@ static inline int elf_sym__is_label(const GElf_Sym *sym)
 	return elf_sym__type(sym) == STT_NOTYPE &&
 		sym->st_name != 0 &&
 		sym->st_shndx != SHN_UNDEF &&
-		sym->st_shndx != SHN_ABS;
+		sym->st_shndx != SHN_ABS &&
+		elf_sym__visibility(sym) != STV_HIDDEN &&
+		elf_sym__visibility(sym) != STV_INTERNAL;
 }
 
 static bool elf_sym__is_a(GElf_Sym *sym, enum map_type type)
-- 
2.19.1

[PATCH AUTOSEL 4.14 30/36] perf trace: Support multiple "vfs_getname" probes

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]

With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:

  $ perf trace -e open -- touch /dev/null
  [...]
       0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  [...]

The output without such beautifier looks like:

     0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:

     0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

  [root@quaco ~]# perf probe -l
    probe:vfs_getname    (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_1  (on getname_flags:73@fs/namei.c with pathname)
  [root@quaco ~]# perf trace -e open* sleep 1
       0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC)   = 3
       0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC)   = 3
       0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
  [root@quaco ~]#

Works, further verified with:

  [root@quaco ~]# perf test vfs
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  [root@quaco ~]#

Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-trace.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 8e3c4ec00017d..b224bf3f2b994 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -2109,19 +2109,30 @@ static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);
 
 static bool perf_evlist__add_vfs_getname(struct perf_evlist *evlist)
 {
-	struct perf_evsel *evsel = perf_evsel__newtp("probe", "vfs_getname");
+	bool found = false;
+	struct perf_evsel *evsel, *tmp;
+	struct parse_events_error err = { .idx = 0, };
+	int ret = parse_events(evlist, "probe:vfs_getname*", &err);
 
-	if (IS_ERR(evsel))
+	if (ret)
 		return false;
 
-	if (perf_evsel__field(evsel, "pathname") == NULL) {
+	evlist__for_each_entry_safe(evlist, evsel, tmp) {
+		if (!strstarts(perf_evsel__name(evsel), "probe:vfs_getname"))
+			continue;
+
+		if (perf_evsel__field(evsel, "pathname")) {
+			evsel->handler = trace__vfs_getname;
+			found = true;
+			continue;
+		}
+
+		list_del_init(&evsel->node);
+		evsel->evlist = NULL;
 		perf_evsel__delete(evsel);
-		return false;
 	}
 
-	evsel->handler = trace__vfs_getname;
-	perf_evlist__add(evlist, evsel);
-	return true;
+	return found;
 }
 
 static struct perf_evsel *perf_evsel__new_pgfault(u64 config)
-- 
2.19.1

[PATCH AUTOSEL 4.14 31/36] MIPS: Loongson: Introduce and use loongson_llsc_mb()

[Sasha Levin]

From: Huacai Chen <chenhc@lemote.com>

[ Upstream commit e02e07e3127d8aec1f4bcdfb2fc52a2d99b4859e ]

On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and
lld/scd is very weak ordering. We should add sync instructions "before
each ll/lld" and "at the branch-target between ll/sc" to workaround.
Otherwise, this flaw will cause deadlock occasionally (e.g. when doing
heavy load test with LTP).

Below is the explaination of CPU designer:

"For Loongson 3 family, when a memory access instruction (load, store,
or prefetch)'s executing occurs between the execution of LL and SC, the
success or failure of SC is not predictable. Although programmer would
not insert memory access instructions between LL and SC, the memory
instructions before LL in program-order, may dynamically executed
between the execution of LL/SC, so a memory fence (SYNC) is needed
before LL/LLD to avoid this situation.

Since Loongson-3A R2 (3A2000), we have improved our hardware design to
handle this case. But we later deduce a rarely circumstance that some
speculatively executed memory instructions due to branch misprediction
between LL/SC still fall into the above case, so a memory fence (SYNC)
at branch-target (if its target is not between LL/SC) is needed for
Loongson 3A1000, 3B1500, 3A2000 and 3A3000.

Our processor is continually evolving and we aim to to remove all these
workaround-SYNCs around LL/SC for new-come processor."

Here is an example:

Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var,
this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same
time('sc' return 1), and the variable is only *added by 1*, sometimes,
which is wrong and unacceptable(it should be added by 2).

Why disable fix-loongson3-llsc in compiler?
Because compiler fix will cause problems in kernel's __ex_table section.

This patch fix all the cases in kernel, but:

+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target
of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix
the ll and branch-target coincidently such as atomic_sub_if_positive/
cmpxchg/xchg, just like this one.

+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch
edac.h

+. local_ops and cmpxchg_local should not be affected by this bug since
only the owner can write.

+. mips_atomic_set for syscall.c is deprecated and rarely used, just let
it go

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
[paul.burton@mips.com:
  - Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add
    a comment describing why it's there.
  - Make loongson_llsc_mb() a no-op when
    CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory
    barrier.
  - Add a comment describing the bug & how loongson_llsc_mb() helps
    in asm/barrier.h.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: ambrosehua@gmail.com
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Xu Chenghua <xuchenghua@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig               | 15 ++++++++++++++
 arch/mips/include/asm/atomic.h  |  6 ++++++
 arch/mips/include/asm/barrier.h | 36 +++++++++++++++++++++++++++++++++
 arch/mips/include/asm/bitops.h  |  5 +++++
 arch/mips/include/asm/futex.h   |  3 +++
 arch/mips/include/asm/pgtable.h |  2 ++
 arch/mips/loongson64/Platform   | 23 +++++++++++++++++++++
 arch/mips/mm/tlbex.c            | 10 +++++++++
 8 files changed, 100 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8d4470f44b740..77877c56ffc10 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1407,6 +1407,21 @@ config LOONGSON3_ENHANCEMENT
 	  please say 'N' here. If you want a high-performance kernel to run on
 	  new Loongson 3 machines only, please say 'Y' here.
 
+config CPU_LOONGSON3_WORKAROUNDS
+	bool "Old Loongson 3 LLSC Workarounds"
+	default y if SMP
+	depends on CPU_LOONGSON3
+	help
+	  Loongson 3 processors have the llsc issues which require workarounds.
+	  Without workarounds the system may hang unexpectedly.
+
+	  Newer Loongson 3 will fix these issues and no workarounds are needed.
+	  The workarounds have no significant side effect on them but may
+	  decrease the performance of the system so this option should be
+	  disabled unless the kernel is intended to be run on old systems.
+
+	  If unsure, please say Y.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 0ab176bdb8e81..8ee17565bc781 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -47,6 +47,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%0, %1		# atomic_" #op "	\n"   \
@@ -86,6 +87,7 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%1, %2		# atomic_" #op "_return	\n"   \
@@ -134,6 +136,7 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	ll	%1, %2		# atomic_fetch_" #op "	\n"   \
@@ -389,6 +392,7 @@ static __inline__ void atomic64_##op(long i, atomic64_t * v)		      \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%0, %1		# atomic64_" #op "	\n"   \
@@ -428,6 +432,7 @@ static __inline__ long atomic64_##op##_return_relaxed(long i, atomic64_t * v) \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%1, %2		# atomic64_" #op "_return\n"  \
@@ -477,6 +482,7 @@ static __inline__ long atomic64_fetch_##op##_relaxed(long i, atomic64_t * v)  \
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	arch=r4000				\n"   \
 		"1:	lld	%1, %2		# atomic64_fetch_" #op "\n"   \
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index a5eb1bb199a7f..b7f6ac5e513c9 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -222,6 +222,42 @@
 #define __smp_mb__before_atomic()	__smp_mb__before_llsc()
 #define __smp_mb__after_atomic()	smp_llsc_mb()
 
+/*
+ * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load,
+ * store or pref) in between an ll & sc can cause the sc instruction to
+ * erroneously succeed, breaking atomicity. Whilst it's unusual to write code
+ * containing such sequences, this bug bites harder than we might otherwise
+ * expect due to reordering & speculation:
+ *
+ * 1) A memory access appearing prior to the ll in program order may actually
+ *    be executed after the ll - this is the reordering case.
+ *
+ *    In order to avoid this we need to place a memory barrier (ie. a sync
+ *    instruction) prior to every ll instruction, in between it & any earlier
+ *    memory access instructions. Many of these cases are already covered by
+ *    smp_mb__before_llsc() but for the remaining cases, typically ones in
+ *    which multiple CPUs may operate on a memory location but ordering is not
+ *    usually guaranteed, we use loongson_llsc_mb() below.
+ *
+ *    This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later.
+ *
+ * 2) If a conditional branch exists between an ll & sc with a target outside
+ *    of the ll-sc loop, for example an exit upon value mismatch in cmpxchg()
+ *    or similar, then misprediction of the branch may allow speculative
+ *    execution of memory accesses from outside of the ll-sc loop.
+ *
+ *    In order to avoid this we need a memory barrier (ie. a sync instruction)
+ *    at each affected branch target, for which we also use loongson_llsc_mb()
+ *    defined below.
+ *
+ *    This case affects all current Loongson 3 CPUs.
+ */
+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */
+#define loongson_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#else
+#define loongson_llsc_mb()	do { } while (0)
+#endif
+
 #include <asm-generic/barrier.h>
 
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index fa57cef12a466..38a162d11b7b8 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -68,6 +68,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# set_bit	\n"
@@ -78,6 +79,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -120,6 +122,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (~(1UL << bit)));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# clear_bit	\n"
@@ -130,6 +133,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -188,6 +192,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
index a9e61ea54ca96..0a62a91b592d6 100644
--- a/arch/mips/include/asm/futex.h
+++ b/arch/mips/include/asm/futex.h
@@ -50,6 +50,7 @@
 		  "i" (-EFAULT)						\
 		: "memory");						\
 	} else if (cpu_has_llsc) {					\
+		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -162,6 +163,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		  "i" (-EFAULT)
 		: "memory");
 	} else if (cpu_has_llsc) {
+		loongson_llsc_mb();
 		__asm__ __volatile__(
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
@@ -190,6 +192,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		: GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
 		  "i" (-EFAULT)
 		: "memory");
+		loongson_llsc_mb();
 	} else
 		return -ENOSYS;
 
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 9e9e94415d08f..aab7b382a0623 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -229,6 +229,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
 		} else if (kernel_uses_llsc) {
+			loongson_llsc_mb();
 			__asm__ __volatile__ (
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
 			"	.set	push				\n"
@@ -244,6 +245,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			"	.set	mips0				\n"
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
+			loongson_llsc_mb();
 		}
 #else /* !CONFIG_SMP */
 		if (pte_none(*buddy))
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 0fce4608aa886..c1a4d4dc46655 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -23,6 +23,29 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
 endif
 
 cflags-$(CONFIG_CPU_LOONGSON3)	+= -Wa,--trap
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON3)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
 #
 # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
 # as MIPS64 R2; older versions as just R1.  This leaves the possibility open
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 79b9f2ad3ff51..7da67a2781292 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -935,6 +935,8 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		 * to mimic that here by taking a load/istream page
 		 * fault.
 		 */
+		if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+			uasm_i_sync(p, 0);
 		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
 		uasm_i_jr(p, ptr);
 
@@ -1660,6 +1662,8 @@ static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(p, 0);
 # ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_lld(p, pte, 0, ptr);
@@ -2277,6 +2281,8 @@ static void build_r4000_tlb_load_handler(void)
 #endif
 
 	uasm_l_nopage_tlbl(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_0 & 1) {
@@ -2332,6 +2338,8 @@ static void build_r4000_tlb_store_handler(void)
 #endif
 
 	uasm_l_nopage_tlbs(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
@@ -2388,6 +2396,8 @@ static void build_r4000_tlb_modify_handler(void)
 #endif
 
 	uasm_l_nopage_tlbm(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
-- 
2.19.1

[PATCH AUTOSEL 4.14 32/36] MIPS: Remove function size check in get_frame_info()

[Sasha Levin]

From: Jun-Ru Chang <jrjang@realtek.com>

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/process.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index e8b166e9146a3..ea563bfea0e10 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -370,7 +370,7 @@ static inline int is_sp_move_ins(union mips_instruction *ip, int *frame_size)
 static int get_frame_info(struct mips_frame_info *info)
 {
 	bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS);
-	union mips_instruction insn, *ip, *ip_end;
+	union mips_instruction insn, *ip;
 	const unsigned int max_insns = 128;
 	unsigned int last_insn_size = 0;
 	unsigned int i;
@@ -383,10 +383,9 @@ static int get_frame_info(struct mips_frame_info *info)
 	if (!ip)
 		goto err;
 
-	ip_end = (void *)ip + info->func_size;
-
-	for (i = 0; i < max_insns && ip < ip_end; i++) {
+	for (i = 0; i < max_insns; i++) {
 		ip = (void *)ip + last_insn_size;
+
 		if (is_mmips && mm_insn_16bit(ip->halfword[0])) {
 			insn.word = ip->halfword[0] << 16;
 			last_insn_size = 2;
-- 
2.19.1

[PATCH AUTOSEL 4.14 33/36] i2c: omap: Use noirq system sleep pm ops to idle device for suspend

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit c6e2bd956936d925748581e4d0294f10f1d92f2c ]

We currently get the following error with pixcir_ts driver during a
suspend resume cycle:

omap_i2c 4802a000.i2c: controller timed out
pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110
pixcir_ts 1-005c: Failed to disable interrupt generation: -110
pixcir_ts 1-005c: Failed to stop
dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
[pixcir_i2c_ts] returns -110
PM: Device 1-005c failed to resume: error -110

And at least am437x based devices with pixcir_ts will fail to resume
to a touchscreen that is configured as the wakeup-source in device
tree for these devices.

This is because pixcir_ts tries to reconfigure it's registers for
noirq suspend which fails. This also leaves i2c-omap in enabled state
for suspend.

Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by
adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Let's also get rid of some ifdefs while at it and replace them with
__maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
already deal with the various PM Kconfig options.

Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-omap.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 23c2ea2baedc0..12ba183693d69 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1477,8 +1477,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1504,7 +1503,7 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1519,20 +1518,18 @@ static int omap_i2c_runtime_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops omap_i2c_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
 			   omap_i2c_runtime_resume, NULL)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
2.19.1

[PATCH AUTOSEL 4.14 34/36] fs: ratelimit __find_get_block_slow() failure message.

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/buffer.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index b96f3b98a6ef9..8086cc8ff0bc2 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -208,6 +208,7 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	struct buffer_head *head;
 	struct page *page;
 	int all_mapped = 1;
+	static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);
 
 	index = block >> (PAGE_SHIFT - bd_inode->i_blkbits);
 	page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED);
@@ -235,15 +236,15 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	 * file io on the block device and getblk.  It gets dealt with
 	 * elsewhere, don't buffer_error if we had some unmapped buffers
 	 */
-	if (all_mapped) {
-		printk("__find_get_block_slow() failed. "
-			"block=%llu, b_blocknr=%llu\n",
-			(unsigned long long)block,
-			(unsigned long long)bh->b_blocknr);
-		printk("b_state=0x%08lx, b_size=%zu\n",
-			bh->b_state, bh->b_size);
-		printk("device %pg blocksize: %d\n", bdev,
-			1 << bd_inode->i_blkbits);
+	ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE);
+	if (all_mapped && __ratelimit(&last_warned)) {
+		printk("__find_get_block_slow() failed. block=%llu, "
+		       "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, "
+		       "device %pg blocksize: %d\n",
+		       (unsigned long long)block,
+		       (unsigned long long)bh->b_blocknr,
+		       bh->b_state, bh->b_size, bdev,
+		       1 << bd_inode->i_blkbits);
 	}
 out_unlock:
 	spin_unlock(&bd_mapping->private_lock);
-- 
2.19.1

[PATCH AUTOSEL 4.14 35/36] qed: Fix EQ full firmware assert.

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 660492bcf4a7561b5fdc13be0ae0b0c0a8c120be ]

When slowpath messages are sent with high rate, the resulting
events can lead to a FW assert in case they are not handled fast
enough (Event Queue Full assert). Attempt to send queued slowpath
messages only after the newly evacuated entries in the EQ ring
are indicated to FW.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_sp.h  |  1 +
 drivers/net/ethernet/qlogic/qed/qed_spq.c | 15 +++++++--------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index 01a213d4ee9c5..e7192f3babc28 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -380,6 +380,7 @@ void qed_consq_setup(struct qed_hwfn *p_hwfn);
  * @param p_hwfn
  */
 void qed_consq_free(struct qed_hwfn *p_hwfn);
+int qed_spq_pend_post(struct qed_hwfn *p_hwfn);
 
 /**
  * @file
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index 467755b6dd0be..01f8e2b5cb6c3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -404,6 +404,11 @@ int qed_eq_completion(struct qed_hwfn *p_hwfn, void *cookie)
 
 	qed_eq_prod_update(p_hwfn, qed_chain_get_prod_idx(p_chain));
 
+	/* Attempt to post pending requests */
+	spin_lock_bh(&p_hwfn->p_spq->lock);
+	rc = qed_spq_pend_post(p_hwfn);
+	spin_unlock_bh(&p_hwfn->p_spq->lock);
+
 	return rc;
 }
 
@@ -747,7 +752,7 @@ static int qed_spq_post_list(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
-static int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
+int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
 {
 	struct qed_spq *p_spq = p_hwfn->p_spq;
 	struct qed_spq_entry *p_ent = NULL;
@@ -879,7 +884,6 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 	struct qed_spq_entry	*p_ent = NULL;
 	struct qed_spq_entry	*tmp;
 	struct qed_spq_entry	*found = NULL;
-	int			rc;
 
 	if (!p_hwfn)
 		return -EINVAL;
@@ -937,12 +941,7 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 		 */
 		qed_spq_return_entry(p_hwfn, found);
 
-	/* Attempt to post pending requests */
-	spin_lock_bh(&p_spq->lock);
-	rc = qed_spq_pend_post(p_hwfn);
-	spin_unlock_bh(&p_spq->lock);
-
-	return rc;
+	return 0;
 }
 
 int qed_consq_alloc(struct qed_hwfn *p_hwfn)
-- 
2.19.1

[PATCH AUTOSEL 4.14 36/36] qed: Consider TX tcs while deriving the max num_queues for PF.

[Sasha Levin]

From: Sudarsana Reddy Kalluru <skalluru@marvell.com>

[ Upstream commit fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]

Max supported queues is derived incorrectly in the case of multi-CoS.
Need to consider TCs while calculating num_queues for PF.

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 83c1c4fa102b7..13db311c16e5e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -2161,7 +2161,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 			u16 num_queues = 0;
 
 			/* Since the feature controls only queue-zones,
-			 * make sure we have the contexts [rx, tx, xdp] to
+			 * make sure we have the contexts [rx, xdp, tcs] to
 			 * match.
 			 */
 			for_each_hwfn(cdev, i) {
@@ -2171,7 +2171,8 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 				u16 cids;
 
 				cids = hwfn->pf_params.eth_pf_params.num_cons;
-				num_queues += min_t(u16, l2_queues, cids / 3);
+				cids /= (2 + info->num_tc);
+				num_queues += min_t(u16, l2_queues, cids);
 			}
 
 			/* queues might theoretically be >256, but interrupts'
-- 
2.19.1