* Applied "regulator: max77650: Convert to use regulator_set/get_current_limit_regmap" to the regulator tree
@ 2019-03-04 0:06 Mark Brown
0 siblings, 0 replies; only message in thread
From: Mark Brown @ 2019-03-04 0:06 UTC (permalink / raw)
To: Axel Lin; +Cc: Bartosz Golaszewski, Mark Brown, linux-kernel
The patch
regulator: max77650: Convert to use regulator_set/get_current_limit_regmap
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 6c98ac2a347f4849885bd9f966bda50fc25f8d55 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 28 Feb 2019 21:40:18 +0800
Subject: [PATCH] regulator: max77650: Convert to use
regulator_set/get_current_limit_regmap
Use regulator_set/get_current_limit_regmap helpers to save some code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/max77650-regulator.c | 74 +++++++++-----------------
1 file changed, 25 insertions(+), 49 deletions(-)
diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c
index a1af414db751..31ebf34b01ec 100644
--- a/drivers/regulator/max77650-regulator.c
+++ b/drivers/regulator/max77650-regulator.c
@@ -26,9 +26,6 @@
#define MAX77650_REGULATOR_AD_ENABLED BIT(3)
#define MAX77650_REGULATOR_CURR_LIM_MASK GENMASK(7, 6)
-#define MAX77650_REGULATOR_CURR_LIM_BITS(_reg) \
- (((_reg) & MAX77650_REGULATOR_CURR_LIM_MASK) >> 6)
-#define MAX77650_REGULATOR_CURR_LIM_SHIFT(_val) ((_val) << 6)
enum {
MAX77650_REGULATOR_ID_LDO = 0,
@@ -82,7 +79,7 @@ static const u32 max77651_sbb1_regulator_volt_table[] = {
_val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
} while (0)
-static const int max77650_current_limit_table[] = {
+static const unsigned int max77650_current_limit_table[] = {
1000000, 866000, 707000, 500000,
};
@@ -220,47 +217,6 @@ static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev,
return 0;
}
-static int max77650_regulator_get_current_limit(struct regulator_dev *rdev)
-{
- struct max77650_regulator_desc *rdesc;
- struct regmap *map;
- int val, rv, limit;
-
- rdesc = rdev_get_drvdata(rdev);
- map = rdev_get_regmap(rdev);
-
- rv = regmap_read(map, rdesc->regA, &val);
- if (rv)
- return rv;
-
- limit = MAX77650_REGULATOR_CURR_LIM_BITS(val);
-
- return max77650_current_limit_table[limit];
-}
-
-static int max77650_regulator_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-{
- struct max77650_regulator_desc *rdesc;
- struct regmap *map;
- int i, limit;
-
- rdesc = rdev_get_drvdata(rdev);
- map = rdev_get_regmap(rdev);
-
- for (i = 0; i < ARRAY_SIZE(max77650_current_limit_table); i++) {
- limit = max77650_current_limit_table[i];
-
- if (limit >= min_uA && limit <= max_uA) {
- return regmap_update_bits(map, rdesc->regA,
- MAX77650_REGULATOR_CURR_LIM_MASK,
- MAX77650_REGULATOR_CURR_LIM_SHIFT(i));
- }
- }
-
- return -EINVAL;
-}
-
static const struct regulator_ops max77650_regulator_LDO_ops = {
.is_enabled = max77650_regulator_is_enabled,
.enable = max77650_regulator_enable,
@@ -280,8 +236,8 @@ static const struct regulator_ops max77650_regulator_SBB_ops = {
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = max77650_regulator_set_voltage_sel,
- .get_current_limit = max77650_regulator_get_current_limit,
- .set_current_limit = max77650_regulator_set_current_limit,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
@@ -293,8 +249,8 @@ static const struct regulator_ops max77651_SBB1_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel,
- .get_current_limit = max77650_regulator_get_current_limit,
- .set_current_limit = max77650_regulator_set_current_limit,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
};
@@ -343,6 +299,10 @@ static struct max77650_regulator_desc max77650_SBB0_desc = {
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB0_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB0_A,
.regB = MAX77650_REG_CNFG_SBB0_B,
@@ -368,6 +328,10 @@ static struct max77650_regulator_desc max77650_SBB1_desc = {
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB1_A,
.regB = MAX77650_REG_CNFG_SBB1_B,
@@ -392,6 +356,10 @@ static struct max77650_regulator_desc max77651_SBB1_desc = {
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB1_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB1_A,
.regB = MAX77650_REG_CNFG_SBB1_B,
@@ -417,6 +385,10 @@ static struct max77650_regulator_desc max77650_SBB2_desc = {
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB2_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB2_A,
.regB = MAX77650_REG_CNFG_SBB2_B,
@@ -442,6 +414,10 @@ static struct max77650_regulator_desc max77651_SBB2_desc = {
.enable_time = 100,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .csel_reg = MAX77650_REG_CNFG_SBB2_A,
+ .csel_mask = MAX77650_REGULATOR_CURR_LIM_MASK,
+ .curr_table = max77650_current_limit_table,
+ .n_current_limits = ARRAY_SIZE(max77650_current_limit_table),
},
.regA = MAX77650_REG_CNFG_SBB2_A,
.regB = MAX77650_REG_CNFG_SBB2_B,
--
2.20.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-03-04 0:06 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-04 0:06 Applied "regulator: max77650: Convert to use regulator_set/get_current_limit_regmap" to the regulator tree Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).